3FT Cat6 Patch Cables

CAT6 PATCH CABLE 3FT YELLOW.Snagless patch cable is perfect for VoIP, video and file transfers.Cable length: 3'.Connections: One RJ-45 male connector on both the ends.Connectivity: Wired.Bare stranded copper conductor for better conductivity and PVC jacket for added durability.Meets ISO/IEC 11801 and TIA/EIA-568-B.2-1 certifications or standards.Cable type: Cat6.Connector plating: 50 micron gold-plated Connector plating.Comes in yellow color.Impedance: 100 +/- 15 ohm at 1 - 550 MHz, Resistance: 93.8 ohm/km at 20 deg C max, Capacitance: 56 pF/m max.Dielectric strength: AC 1.5 kV, Spark test: 2.5 kV, Structural return loss: 8.6 dB min at 550 MHz, Propagation delay: 536 nS/100 m max at 550 MHz.Data transfer rate: 100 Mbps.Increases your network speed with higher bandwidth.Protects your network for future expansion.2-row staggered pin configuration controls cross-talk at hyper-frequency.Comes with lifetime warranty

The C2G ® 3' yellow Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Category 6 for Network Device.RJ-45 Male.3ft.Yellow.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in yellow color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.11 lbs..Comes with lifetime warranty

The StarTech C6ASPAT3BK 3' Cat6a black patch cable features RJ-45 male connectors on both the sides for enhanced connectivity. This snagless shielded patch cable with PVC jacket, is great for 10GBase-T Ethernet networks and protects data against electromagnetic interference. It supports speeds up to 500 MHz and is compatible with PoE enabled devices. This cable assures fast and dependable 10 Gigabit network connections..Patch cable is perfect to connect servers to a storage area network, connect between computers, hubs, switches, routers, print servers & patch panels.Dimensions: 3'L.Comes in black color and features aluminum-polyester foil and polyvinyl chloride jacket for added protection.Interface/ports: RJ-45 male on both sides.Number of conductors: four pair STP, Wire gauge: 25 AWG.Shielded snag-less cable offers superior protection.Cable rating: Cat6a - 10 Gb/s.Fire rating: CMG rated (general purpose).Protects data against noise & EMI/RFI interference and creates secured connections with snagless clips to protect the connectors during installation.Contains one patch cable.RoHS and green Compliant.Weight: 1.5 oz..Comes with lifetime warranty

Make Power-over-Ethernet-capable Gigabit network connections - 3ft Cat6 Cable / 3' Ethernet Patch Cable / 3 ft Gigabit Cat6 Cable - Black Gigabit Snagless Cat6 Patch Cable / ETL Verified / UTP Cat 6 Cable - 3 ft RJ45 Male to Male Patch Cord - 24 AWG / 100% Copper / 50-micron Gold Connectors - Designed for use with Gigabit networks - Patches from hub to distribution panel - Connects workstation to wall outlet - Guaranteed reliability with a lifetime warranty.RJ45 connector clip protectors help keep the plugs from snagging while routing the cable, for easier Cat 6 cable runs.RJ45 connector clip protectors.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point.Constructed with top quality components.Backed by StarTech lifetime warranty.Constructed with top quality components

The 4XEM 3 ft. Cat6A Snagless RJ45 Ethernet Patch Cable delivers fast and reliable 10 Gigabit connectivity for professional, business, and educational networks. Built with 25 AWG pure copper stranded conductors, it ensures superior signal integrity, reduced resistance, and stronger performance than CCA alternatives. The snagless overmold strain‑relief boot protects the RJ45 latch during frequent installs, while the ft.1 UL‑rated PVC jacket provides flexibility and long‑lasting durability. Supporting 500 MHz bandwidth, this UTP cable enables smooth data transfers, seamless VoIP communication, and high‑quality video streaming. With a compact 3 ft. length, it is ideal for tight spaces, patch panels, and organized cable routing. Fully compliant with TIA/EIA‑568B.2 and RoHS standards, this cable ensures reliable performance across all standard Ethernet devices and comes backed by a lifetime warranty..Built for networking use in offices, labs, and enterprise setups..Comes in a compact 3 ft length for short device links..Equipped with RJ45 male connectors using 568B wiring..Made with 25 AWG pure copper and a blue PVC jacket..Provides 500 MHz bandwidth for fast signal delivery..Uses RJ45 terminals for stable Ethernet connectivity..Supports 10 Gbps transfer rates for high‑speed traffic..Works with switches, routers, and patch panel systems..Meets RoHS and TIA/EIA‑568B.2 compliance standards..Lifetime warranty for trusted durability.

3 ft. CAT6 Ethernet cable - 10 Pack - ETL Verified - Blue CAT6 Patch Cord - Molded RJ45 Connectors - 24 AWG Copper Wire – UTP Cable (C6PATCH3BL10PK).100% COPPER WIRING: Each CAT6 Ethernet cable is built with 100% copper wiring to prevent weak power delivery and equipment damage, compared to copper-clad aluminum wire cables.CABLE PERFORMANCE: Length: 3 ft. (1 m) Color: Blue | Cable Structure: 4 Pair UTP | Connector Type: Molded | Jacket Material: PVC | Wire Gauge: 24 AWG | Wiring Standard: ANSI/T568B.CAT6 PATCH CABLE MULTIPACK: This 10 pack of 3 ft. Blue patch cords is a convenient and affordable option for businesses in need of multiple molded ethernet cables.EASY INSTALLATION: Blue molded patch cord is easy to connect into high density panels with many cables; Compatible w/Cat5e; Available w/Snagless boots for easy wiring conduit installation.ETL VERIFIED: This CAT6 cable 10 pack is ETL Verified to ensure an elevated level of quality and reliability. Each CAT6 patch cord is tested to comply with ANSI/TIA-568-D Category 6 requirements.Bulk CAT6 Molded Ethernet Cables | 100% Copper Wire | Blue | ETL Verified

3 ft. CAT6 Ethernet cable - 10 Pack - ETL Verified - Blue CAT6 Patch Cord - Snagless RJ45 Connectors - 24 AWG Copper Wire - UTP Ethernet Cable (N6PATCH3BL10PK).100% COPPER WIRING: Each CAT6 Ethernet cable is built with 100% copper wiring to prevent weak power delivery and equipment damage, compared to copper-clad aluminum wire cables.CABLE PERFORMANCE: Length: 3 ft. (1 m) Color: Blue | Cable Structure: 4 Pair UTP | Connector Type: Snagless | Jacket Material: PVC | Wire Gauge: 24 AWG | Wiring Standard: ANSI/T568B.CAT6 PATCH CABLE MULTIPACK: This 10 pack of 3 ft. Blue patch cords is a convenient and affordable option for businesses in need of multiple snagless ethernet cables.EASY INSTALLATION: Blue snagless Ethernet cords won’t get caught in wiring conduits during installation; Compatible w/Cat5e & earlier standards; Molded boots available for constrained spaces.ETL VERIFIED: This CAT6 cable 10 pack is ETL Verified to ensure an elevated level of quality and reliability. Each CAT6 patch cord is tested to comply with ANSI/TIA-568-D Category 6 requirements.Bulk CAT6 Patch Cables | Snagless | 100% Copper Wire | Blue | Lifetime Warranty

Introducing the 4XEM 3 ft. Cat6 Molded RJ45 UTP Network Patch Cable, the perfect solution for all your high-speed networking needs.Designed to meet CAT6 - 250 MHz standards, this cable provides lightning-fast data transfer speeds. Its RJ-45 Male connectors with EIA/TIA 568B Pinout on both ends guarantee compatibility with a wide range of devices and networks, making it a versatile addition to your connectivity arsenal. Crafted with quality in mind, the cable jacket is made of durable PVC (Polyvinyl Chloride), ensuring longevity even in demanding environments. Inside, the cable features Copper-Clad Aluminum (CCA) conductors with a 26 AWG wire gauge, optimizing signal quality and transmission. With a compact 3-foot length and a slender 0.20-inch cable OD (5.0 mm), this cable is ideal for tight spaces and clutter-free cable management. Upgrade your network with the 4XEM 3FT Cat6 Molded RJ45 UTP Network Patch Cable, and experience the benefits of top-notch quality, high-speed performance, and a lifetime of reliable connectivity. Order yours today and stay connected effortlessly..Reliable Connectivity: With a CAT6 rating of 250 MHz and high-quality connectors, this cable ensures a stable and fast network connection, reducing lag and downtime..Easy Cable Management: Its compact 3-foot length and slim cable design are perfect for tight spaces and clutter-free cable routing, making installation a breeze..Versatile Compatibility: The RJ-45 Male connectors with EIA/TIA 568B Pinout work seamlessly with a wide range of devices and networks, ensuring compatibility in various setups..Durable Construction: The PVC jacket and Copper-Clad Aluminum conductors make this cable robust and long-lasting, capable of withstanding demanding conditions..Copper-Clad Aluminum (CCA) conductors with 26 AWG wire gauge.Lifetime Warranty: Enjoy peace of mind knowing your investment is protected for a lifetime, demonstrating the cable's durability and quality..4XEM 3FT Cat6 Molded RJ45 UTP Ethernet Patch Cable (Blue)

Standard RJ45 connectors.Black.Length: 3'

The Comprehensive® CAT6-3GRY-25VP 3' Cat6e snagless patch cable in grey, comes with male RJ45 network connector that provides up to 500 MHz bandwidth for high-speed signal transmission. It has a molded low profile, snagless boot that offers you for quick and easy installation every time by providing superior strain relief. Each individual pair is attached together to ensure proper spacing between the twists of the wire which greatly reduces loss compared to standard 100 MHz cable. It comes in a pack of 25..Cat6 snagless patch cable provides up to 550 MHz bandwidth for high-speed signal transmission.Dimensions: 3'L (cable).Compatible with network device.Comes in gray color.25/pack.Connector on first end: 1 x RJ-45 male network, connector on second end: 1 x RJ-45 male network.Bare stranded copper conductor.PVC jacket.Conductors: 4 twisted pairs 24 AWG bare copper stranded cable.Polycarbonate connector.Contact material: Copper alloy plated with 50u gold.Conductor DC resistance: 9.8 ohm at 100 m maximum.Cable style: Molded snagless boot.Bandwidth: Supports voice/data/video distribution applications up to 550 MHz.Offers great performance.Meets all Cat6 TIA/EIA, verified to EIA/TIA 568B.2, RoHS, Green, UL standards.Weight: 2.5 lbs..Comes with lifetime warranty

Tripp Lite Cat. 6 UTP Patch Cable-RJ-45 - RJ-45 male - 3ft- Black.6 UTP Patch Cable.Black.3ft Cable.RJ-45 Male.Tripp Lite Category 6 UTP patch cable in black color measures 3 ft.Cable features RJ-45 and RJ-45 male connectors at either ends.Patch Cable

With a polyvinyl chloride jacket, the StarTech N6PATCH15WH 3' white snagless Cat 6 UTP patch cable offers optimum insulation. It features a RJ-45 male network connector at both the ends, for efficient connectivity. With its high quality 24 AWG copper wire, this patch cable facilitates high-speed data connectivity through routers, hubs, switches or any other Ethernet device. The 50-micron gold-plated cable ensures clean, clear transmission and delivers optimum conductivity. It patches from hub to distribution panel and is great for use with Gigabit networks. This 4-pair UTP cable connects workstation to wall outlet..Category 6 patch cable connects workstation to wall outlet.Convenient length of 3' extend the reach of network devices.Has 50-micron, male RJ-45 gold-plated connectors to offer optimum conductivity while eliminating signal loss due to oxidation or corrosion.Suitable for use with Gigabit networks.Has copper conductors with a PVC jacket that enables you to color code your network cable runs as needed.EIA/TIA-568A, TIA/EIA-568-B.1-2001 T568B, CMG rated, UL listed, ETL verified and RoHS Green compliant.Comes in white color.Cable rating: 500 MHz.Features four pair UTP conductors for efficient conductivity.Constructed with 24 gauge copper wire to support a broad range of Ethernet applications such as Power over Ethernet.Molded strain relief prevents the bending of the cable at sharp angles at the RJ-45 connector to minimize the stress at the plug termination point.Carefully constructed and tested, to keep near end crosstalk well within acceptable limits.Has colored hoods for departmental color coding.Constructed with top quality components.Comes with lifetime warranty

3 ft. CAT6 Ethernet Cable - 10 Pack - ETL Verified - Gray CAT6 Patch Cord - Snagless RJ45 Connectors - 24 AWG - UTP.CAT6 Ethernet cable multipack meets all ANSI/TIA-568-D Category 6 patch cable specifications.This Gray Ethernet cable 10 pack is ETL Verified to ensure an elevated level of quality and reliability.CAT6 patch cord features 100% copper and foil-shielded twisted-pair wiring to prevent EMI interference.Snagless RJ45 boot design won't get caught in wiring conduits during installation.Built with 24 AWG copper wire and tested to keep Near-End Crosstalk within acceptable limits.Bulk CAT6 Patch Cables | Snagless | 100% Copper Wire | Gray | Lifetime Warranty

With a polyvinyl chloride jacket, the StarTech N6PATCH100GN 3' green snagless Cat 6 UTP patch cable offers optimum insulation. It features a RJ-45 male network connector at both the ends, for efficient connectivity. With its high quality 24 AWG copper wire, this patch cable facilitates high-speed data connectivity through routers, hubs, switches or any other Ethernet device. The 50-micron gold-plated cable ensures clean, clear transmission and delivers optimum conductivity. It patches from hub to distribution panel and is great for use with Gigabit networks. This 4-pair UTP cable connects workstation to wall outlet..Category 6 patch cable connects workstation to wall outlet.Convenient length of 3' extend the reach of network devices.Has 50-micron, male RJ-45 gold-plated connectors to offer optimum conductivity while eliminating signal loss due to oxidation or corrosion.Suitable for use with Gigabit networks.Has copper conductors with a PVC jacket that enables you to color code your network cable runs as needed.EIA/TIA-568A, TIA/EIA-568-B.1-2001 T568B, CMG rated, UL listed, ETL verified and RoHS Green compliant.Comes in green color.Cable rating: 500 MHz.Features four pair UTP conductors for efficient conductivity.Constructed with 24 gauge copper wire to support a broad range of Ethernet applications such as Power over Ethernet.Molded strain relief prevents the bending of the cable at sharp angles at the RJ-45 connector to minimize the stress at the plug termination point.Carefully constructed and tested, to keep near end crosstalk well within acceptable limits.Has colored hoods for departmental color coding.Constructed with top quality components.Comes with lifetime warranty

Startech® 3' Cat 6a Shielded Snagless RJ-45 Male/Male Patch Cables9.High quality cat6a cable (stp) for dependable ethernet connectivity.Easy-to-install 3' long cord.RJ-45 Male to RJ-45 Male connectors for reliable connection.Ultra flexible PVC jacket offers double shielding against outside noise.High quality construction protect against electro-magnetic or radio frequency interference from nearby equipment with cables.Comes in blue color for a new look.StarTech.com® C6ASPAT3BL 3' Blue Cat 6a patch cable is useful for 10 gigabit Ethernet network connections. Snagless RJ45 connectors offers reliable connection.

Deliver high-performance 10 Gigabit network connections, free of noise and EMI/RFI interference. This Cat6a cable meets or exceeds all Category 6a cable specifications to ensure reliable 10Gb network connections. The cable is shielded to protect your network against electromagnetic interference (EMI/RFI) and system noise, providing the perfect solution for fast and safe network connections. Find the length and color you needThis 3-foot aqua patch cable is perfect for standard applications such as connecting from a wall jack to your laptop docking station or desktop computer. For easier network installations, our Cat6a patch cables are available in a wide variety of lengths and colors. This ensures you have the right size of cable available when you need it and it lets you color code your connections for a more organized setup. Reliable Cat6a 10 Gigabit connectionsEach cable is tested for up to 500MHz frequency and is more than suitable for 10GBase-T Ethernet networks. Constructed with 100% copper and foil-shielded, twisted-pair wiring, this cable was built for quality performance. The cable is designed to keep the data signals traveling through your network free from interference and is perfect in environments that are prone to large amounts of EMI. The 50-micron gold connectors deliver optimum conductivity and eliminate signal loss due to oxidation or corrosion. Snagless RJ45 clips help protect your network connectionsFor trouble-free cable runs, this durable cable features snagless connectors that protect the RJ45 clips during installation, making them less likely to snag or break. The cable also features molded boots which offer connector strain relief by stopping the RJ45 connector termination points from bending at sharp angles. This reduces the risk of damage to the cable, which could decrease network connectivity and performance. The C6ASPAT3AQ is backed by StarTech.com's lifetime warranty for guaranteed reliability..Protect your data against noise and EMI/RFI interference.RJ45 connector-clip protectors eliminate cable snags and breaks during installation.Aqua PVC jacket for color coding your connections

The Cat6 Snagless Unshielded (UTP) Slim Network Patch Cable is the perfect solution for high density datacenter applications. The use of 28 AWG conductors allows for a 36% reduction in diameter over a standard Cat6 network patch cable. This reduced diameter provides a smaller cable surface area which allows for increased airflow when compared to standard Cat6 cables. The 28 AWG conductors also allow this cable to have a smaller bend radius than standard Cat6 cables. The small size and small bend radius of this cable allows it to be easily routed through cable management panels. This cable is designed for fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications. Constructed from high quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation..Experience a simpler way to connect devices with the entire business network.Features Category 6 cable type.Features Snagless.Features 1 x RJ-45 Male Network connector, permitting you to establish a connection with a network device

The C2G ® 3' white Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cable length: 3'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.Length: 3 ft.Connectors: 1 x RJ-45 - male.Connectors (Other Side): 1 x RJ-45 - male.Color: White.Manufacturer Warranty: Limited lifetime warranty.Comes in white color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.12 lbs..Comes with lifetime warranty

Make compatibility and setup the easy part. Tripp Lite 3' Cat6 RJ45/RJ45 Snagless Molded Patch Cable, Gray (N201-003-GY) with a 3 ft length (key specs: 3 ft). Use it for presentations, monitor hookups, or quick replacements to keep teams moving. Simple to integrate and dependable for daily use..Reliable RJ45, Cat6 connection to keep video, data, or audio running smoothly.3 ft length reaches from desk to display or rack without tight bends or strain.Snagless design helps protect the clip during installs and frequent moves.Great for standardizing conference rooms, desks, and IT closets with easy-to-swap replacements.Comes with a lifetime limited warranty.Reliable signal and power you can count on (3 ft)—built for everyday office and IT setups.

The C2G 3' green Cat6 snagless patch cable is suitable for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications. It has one RJ-45 - male connector on both the ends for reliable connectivity. The 24-AWG stranded copper conductors ensure optimal signal conductivity. It has HDPE insulation and PVC jacket for long lasting durability. The unshielded twisted pairs reduce interference and structural return loss. This cable with snagless design protects the connectors from damaged to offer long period optimal performance..Cat6 UTP patch cable with snagless design protect clips while plugging and unplugging.Cable length: 3'.Has one RJ-45 male connector on both the ends for reliable connectivity.Features HDPE insulation and 4 pairs of 24 AWG (7/0.20) copper conductors for better conductivity.RoHS, TIA/EIA-568-B-2.1 and draft 9 compliant.50-micron gold plated connectors ensure clean and clear transmission.Designed for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-AnyLAN and 100 Mbps TP-PMD.Comes in green color.Diameter: 0.98 + 0.05 mm.Voltage: 30 V.Resistance: 9.38 Ohm/100 m, Impedance: 100 Ohm.Mutual capacitance: 5600 pf/100 m.Temperature: 60 deg C.Propagation delay: 545 ns/100 m, Delay skew: 45 ns/100 m.Weight: 0.12 lbs..Comes with lifetime warranty

Active converter cable saves upgrade cost by connecting your DVI computer to a VGA monitor or projector. For fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data, or video distribution applications. Meets all Cat6 TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL)..Snagless design protects clips when plugging and unplugging.Standard RJ45 connectors and unshielded twisted pair wires.Color: Black.PoE (Power Over Ethernet).Warranty Type: Lifetime.Cable Length: 3 ft.Wire Gauge: 24 AWG.RJ-45 Male to RJ-45 Male

The C2G ® 3' red Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable with PVC jacket truncates both impedance and structural return loss. This cable, with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. The patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 3'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.11 lbs..Comes with lifetime warranty

The Comprehensive® 3' blue Cat6a shielded patch cable features 50-micron gold plated RJ-45 male connectors on both the ends for clean and clear transmission. It has 4-pair 24 AWG bare stranded copper conductor for better conductivity and PVC jacket for added durability. High-quality cable featuring a low-profile, snagless hood, is perfect for applications that require high-density switch. It has molded connectors with snagless guards to protect connector tabs from damage while offering easy installation. Patch cable is well suitable for distributing data, voice and video on high-speed Ethernet and Gigabit networks. This cable offers up to 550 MHz bandwidth that is great for ultra-fast as well high-speed signal transmission..Cat6a shielded patch cable enables 10-Gigabit data transmission.Cable length: 3'.Connections: One RJ-45 male connector on both ends.24 AWG Bare copper stranded cable for excellent signal transmission and PVC jacket for added durability.Meets RoHS and EIA/TIA 568B.2 certifications and standards.Data transfer rate: 10 Gbps, transmission to 100 m.Outer diameter: 6.8 mm.Comes in blue color.Device supported: Network device.Supports voice/data/video distribution applications up to 550 MHz.Contact material: Copper alloy plated with 50 u gold.Supports IEEE 802.3af and is DTE power compliant.Provides NEXT performance beyond 600 MHz.Low-profile snagless hood is perfect for high-density switch applications.Patch cables feature molded connectors with snagless guards.PoE rated to four times the standard.Weight: 0.09 lbs..Comes with lifetime warranty

The C2G ® 3' red Cat6 snagless shielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 26 AWG bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable modem, patch panel and other high performance networking applications in high noise environments..Network patch cable safeguards high speed network from noise and electromagnetic interference.Cable length: 3'.Connections: one RJ-45 male connector on both ends.Connectivity: Wired.FR-PVC Jacket for added durability and 26 AWG stranded bare copper conductors for excellent signal transmission.Meets ANSI/TIA 568 C.2, CE standards and certifications.Contact material: 50 micron gold-plated, Shell: Nickel plated for shieldingCompatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels & other networking applications in high noise environments.Comes in red color.Diameter: 6.2 mm + 0.2 mm OD jacket, 1.02 + 0.05 mm insulation.Diameter: 6.2 mm + 0.2 mm OD jacket, 1.02 + 0.05 mm insulation.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 75 deg C.High quality cable and plug construction effectively minimizes near-end crosstalk levels.Protects from EMI/RFI interference.Weight: 0.05 lbs..Comes with lifetime warranty.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels & other networking applications in high noise environments

Comprehensive CAT6 550 Mhz Snagless Patch Cables have a molded low profile, snagless boot that makes installing these cables quick and easy every time while providing superior strain relief. Comprehensive Patch Cables are available in a variety of colors. RoHS Compliant. Lifetime Warranty. When it has to work, it has to be Comprehensive!.Connecting devices to a local area network (LAN) for wired internet and data transfer. Ensuring stable and high-speed internet connectivity..This cable is 3 feet long..Cable uses RJ45 connectors on both ends. RJ45 connectors are standard for Ethernet cables and have the following features: RJ45 Connector Details: Connector Type: RJ45 (8P8C) Pin Count: 8 pins.It is constructed with a 24 AWG (American Wire Gauge) stranded copper conductor, ensuring flexibility and durability. It is encased in a CM Grade PVC (Polyvinyl Chloride) jacket, providing reliable insulation and protection. The cable is colored yellow, offering clear identification.primarily focuses on providing high-speed data transfer and reliable network connections with Data Transfer Rate: Up to 10 Gbps (10,000 Mbps)..Compatible with a variety of devices. Here are some common examples: Computers: Desktops, laptops, and servers. Network Switches: Managed and unmanaged switches. Routers: Home and office routers..Comes with a Life time warranty.

Establish your high-performance network connections with this CAT-6 Network Patch Cable from Intellinet Network Solutions. It supports up to 10-Gbps data transmissions with frequencies up to 250 MHz and all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE. This stranded cable offers all the benefits of a standard CAT-6 network cable, but with a diameter that's considerably smaller. In dense cable installations, the cable creates a tidier and more-organized look, and its thinner size helps promote better air circulation to equipment in a network cabinet. As opposed to other cables that are manufactured with copper-clad aluminum (CCA) or even copper-clad steel (CCS), this cable contains 100% pure bare copper, making it ideal for use in PoE applications. Gold plating on the contacts makes them corrosion-resistant in every environment. The cable plugs are equipped with an extra-long boot that is extremely flexible and bendable for the best strain relief in cable runs around corners and in tight spaces. This is a pack of 10..10 pack.CAT-6 cable with 10 Gbps/1 Gbps and 250 MHz in accordance with ISO/IEC 11801 and EN 50288.Pure bare copper wire for maximum conductivity.Gold-plated contacts for corrosion-free connections.Ultra-thin format for more flexibility and simplified cable management in dense installations.Flexible connector covers to protect RJ45 plugs and allow the thin cable to be easily bent to the desired angle.Ideal for HDBaseT and PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE.Heavy-duty strain relief.Compatible and color-coded with T568A and T568B (sold separately).Standard 8P8C design, compatible with all network RJ45 connections.Fully backward compatible with previous cable categories, including CAT-5e and 5.Lifetime warranty

Establish your high-performance network connections with this CAT-6 Network Patch Cable from Intellinet Network Solutions. It supports up to 10-Gbps data transmissions with frequencies up to 250 MHz and all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE. This stranded cable offers all the benefits of a standard CAT-6 network cable, but with a diameter that's considerably smaller. In dense cable installations, the cable creates a tidier and more-organized look, and its thinner size helps promote better air circulation to equipment in a network cabinet. As opposed to other cables that are manufactured with copper-clad aluminum (CCA) or even copper-clad steel (CCS), this cable contains 100% pure bare copper, making it ideal for use in PoE applications. Gold plating on the contacts makes them corrosion-resistant in every environment. The cable plugs are equipped with an extra-long boot that is extremely flexible and bendable for the best strain relief in cable runs around corners and in tight spaces. This is a pack of 10..10 pack.CAT-6 cable with 10 Gbps/1 Gbps and 250 MHz in accordance with ISO/IEC 11801 and EN 50288.Pure bare copper wire for maximum conductivity.Gold-plated contacts for corrosion-free connections.Ultra-thin format for more flexibility and simplified cable management in dense installations.Flexible connector covers to protect RJ45 plugs and allow the thin cable to be easily bent to the desired angle.Ideal for HDBaseT and PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE.Heavy-duty strain relief.Compatible and color-coded with T568A and T568B (sold separately).Standard 8P8C design, compatible with all network RJ45 connections.Fully backward compatible with previous cable categories, including CAT-5e and 5.Lifetime warranty

Monoprice® 3' Cat6A STP Ethernet network cable with a data transfer speed of 500 MHz has 50 micrometer gold plated contacts for enhanced conductivity. Cable in blue color has snagless strain relief boots while offering EMI and RFI interference protection..Blue.Cat6a.Fixed length network cables are the perfect combination of value and performance.3'.Gauge: 24 AWG.Cable rating: 550 MHz.Technology: Unshielded twisted pair (UTP).Cables are made of 100% bare copper wire, as opposed to copper clad aluminum (CCA) wire.Each cable features color matched, snagless, strain-relief boots.Network cables are great for environments that are more susceptible to electronic interference.Device supported: Network device.Certificates & standards: UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards.Monoprice® 3' Cat6A STP Ethernet network cable in blue color is constructed from 24AWG stranded pure bare copper conductor for long lasting durability.

The C2G ® 3' blue Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 3'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in blue color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.11 lbs..Comes with lifetime warranty