5' Patch Cables

CAT6 PATCH CABLE 5FT BLUE.Cat6 UTP snagless patch cable is perfect for VoIP, video and file transfers.Cable length: 5'.Has one RJ-45 male connector on both the ends for reliable connectivity.Features HDPE insulation and 4 pairs of 24 AWG copper conductors for better conductivity.ISO/IEC 11801 and TIA/EIA-568-B.2-1 compliant.50-micron gold plated connectors ensure clean and clear transmission.Designed for Belkin OmniView SMB 1x16 KVM-over-IP switch, SMB 1x8 KVM-over-IP switch and SMB CAT5 KVM switch.Comes in blue color.Enhances your network speed with higher bandwidth.Diameter: 5.9 mm + 0.15 mm jacket.Voltage: 300 V, Dielectric strength: 1.5 kV (AC).Resistance: 93.8 Ohm/km/20 deg C max, Impedance: 100 Ohm + 15 Ohm at 1 - 550 MHz.Mutual capacitance: 56 pF/m max.Temperature: 75 deg C.Propagation delay: 536 ns/100 m max at 550 MHz, Structural return loss: 8.6 dB min at 550 MHz.Staggered pin configuration for secure connection.CM flame retardant test.Comes with lifetime limited warranty

Category 5e for Network Device.RJ-45 Male.RJ-45 Male.5ft.Black

StarTech® 5 ft Cat5e Gray Molded RJ45 UTP Cat 5e Patch Cable - 5ft Patch Cord.50-micron gold connectors ensure optimum conductivity while eliminating network signal loss due to oxidation or corrosion.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Constructed with top quality components.High quality 24 AWG copper wire.Category 5e.5 ft.1 x RJ-45 Male

Tripp Lite Cat6 Patch Cable, Green, 5 Ft..5 ft.1 x RJ-45 Male.1 x RJ-45 Male.Green

Tripp Lite Cat6 Patch Cable, Yellow, 5 Ft..5 ft.1 x RJ-45 Male.1 x RJ-45 Male.Yellow

StarTech N6PATCH5GN Cat6 Patch Cable with Snagless RJ45 Connectors, 5ft, Green.50-micron gold connectors ensure optimum conductivity while eliminating network signal loss due to oxidation or corrosion.RJ45 connector clip protectors help keep the plugs from snagging while routing the cable, for easier Cat 6 cable runs.Backed by Startech lifetime warranty.RJ45 connector clip protectors.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding

The C2G 31341 5' Cat6 snagless green network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Category 6 for Network Device.RJ-45 Male.5ft.Green.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty

With a polyvinyl chloride jacket, the StarTech C6PATCH5YL 5' yellow molded Cat6 UTP patch cable offers optimum insulation. It features a RJ-45 male network connector at both the ends, for efficient connectivity. With its high quality 24 AWG copper wire, this patch cable facilitates high-speed data connectivity through routers, hubs, switches or any other Ethernet device. The 50-micron gold-plated cable ensures clean, clear transmission and delivers optimum conductivity..Category 6 patch cable connects workstation to wall outlet.Convenient length of 5'.Has 50-micron, male RJ-45 gold-plated connectors to offer optimum conductivity while eliminating signal loss due to oxidation or corrosion.Suitable for use with Gigabit networks.Has copper conductors with a PVC jacket that enables you to color code your network cable runs as needed.Meets CSA TIA/EIA-568B standards and RoHS Green compliant.Comes in yellow color.Cable rating: 500 MHz.Features four pair UTP conductors for efficient conductivity.Constructed with 24 gauge copper wire to ensure high-performance capability for your demanding Ethernet applications, such as Power over Ethernet.Manufactured using high-quality copper conductors to provide highest value for your cable investment.Patches from hub to distribution panel.Constructed and tested to keep near end crosstalk well within acceptable limits.Has colored hoods for departmental color coding.Constructed with top quality components.Comes with lifetime warranty

This 5 ft Molded Cat 6 Patch Cable is ETL verified to meet or exceed all Category 6 performance standards and features a durable green jacket that simplifies departmental color coding while providing rugged flexibility for network connections..50-micron gold connectors ensure optimum conductivity while eliminating network signal loss due to oxidation or corrosion.Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point.Backed by StarTech.com lifetime warranty.Molded RJ45 connectors.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Constructed with top quality components.High quality 24 AWG copper wire.Certifications & Standards: ETL

Tripp Lite 5-ft. Cat6 Gigabit Snagless Molded Patch Cable.Category 6 for Network Device.Patch Cable.5 ft.1 x RJ-45 Male Network.Purple

The C2G 31341 5' Cat6 snagless blue network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Dimensions: 5'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in blue color & features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact & HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty.Category 6 for Network Device

Efficient and reliable, the Tripp Lite N201-005-BL CAT-6 Cable is a great option for Ethernet network connections between a computer system and a router, switch or hub. Both ends of this networking cable play host to RJ-45 male connectors for seamless connection between devices. It has a durable and good-quality PVC jacket that preserves the integrity of the high-quality copper conductor..5' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty.CAT-6 for efficient data transfer across a network.Seamless transmission of data at the rate of 1000 Mbps.Feature molded connectors with integral strain relief. Rated for 550 MHz/1 Gbps communication.5 feet cable length.The Tripp Lite N201-005-BL 5' CAT-6 Patch Cable, Blue, supports 10 Gigabit Ethernet networks to facilitate optimum data transfer.

CAT-6 to conveniently connect network devices.Capable of transmitting data at 1000 Mbps.Dual gold-plated RJ-45 male connectors for a flawless connection.5' CAT-6 allows convenient tethering.Comes with a lifetime limited warranty

Snagless molded patch cable..White.Category 6 RJ45 Male/RJ45 Male.Snagless, molded.5'.Material: Polyvinyl chloride(PVC) jacket.Conductor: Copper.Applications: Cabling for category 6, category 5e and category 5 applications.Technology: Unshielded twisted pair (UTP).System requirements: For 1000 Base-T (1 Gbps ethernet), 10/100 Base-T (ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice and token ring type 3 applications as well as EIA/TIA applications.Communications: 550 MHz/1 Gbps.All cables feature boots with integral strain-relief and RJ45 (Male) connectors.Shielded RJ45, with 50-micron gold plated contacts, 4-pair 24 AWG stranded STP with drain wire.TSB 568B (AT and T 258A)wiring.Includes 5' Cat6 gray Gigabit patch cord snagless molded.Compliant and standards: IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801, ETL (category 5e draft 11).Warranty: Lifetime limited

The C2G 31341 5' Cat6 snagless red network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Network patch cable is suitable for Fast Ethernet and Gigabit computer networks.Dimensions: 5'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color & features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact & HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty

The Cat6 Snagless Unshielded (UTP) Slim Network Patch Cable is the perfect solution for high density datacenter applications. The use of 28 AWG conductors allows for a 36% reduction in diameter over a standard Cat6 network patch cable. This reduced diameter provides a smaller cable surface area which allows for increased airflow when compared to standard Cat6 cables. The 28 AWG conductors also allow this cable to have a smaller bend radius than standard Cat6 cables. The small size and small bend radius of this cable allows it to be easily routed through cable management panels. This cable is designed for fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications. Constructed from high quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation..Offers a reliable network connectivity.Features Category 6 cable type.Protects the plug and socket from dust when plugged in

The C2G 31341 5' Cat6 snagless black network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Network patch cable is suitable for Fast Ethernet and Gigabit computer networks.Dimensions: 5'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color & features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact & HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty

StarTech® 5 ft Gray Gigabit Snagless RJ45 UTP Cat6 Patch Cable - 5ft Patch Cord.RJ45 connector clip protectors help keep the plugs from snagging while routing the cable, for easier Cat 6 cable runs.RJ45 connector clip protectors.Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits.Colored hoods for departmental color coding.Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point.Constructed with top quality components.1 x RJ-45 Male Network.Gold-plated Contacts

The C2G 31341 5' Cat6 snagless white network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Network patch cable is suitable for Fast Ethernet and Gigabit computer networks.Dimensions: 5'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in white color & features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact & HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty

For fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data, or video distribution applications. Meets all CAT-6 TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL). Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation..CAT-6 snagless unshielded (UTP) ethernet network patch cable is designed for network adapters, hubs, switches, routers, HDBaseT applications, and more.Cable length: 5'.Features an RJ45 (male) connector on each end.Constructed from high-quality copper cable and features a durable PVC jacket; comes in blue.Snagless connector design for high density environments and protecting the RJ-45 connector's lock.Supports 10 Gigabit networks up to 180' for fast data transmission and maximum performance and supports 1 Gigabit up to 328'.Constructed with unshielded twisted pair (UTP) wires, designed to counter EMI, RFI, and crosstalk.Meets all CAT-6 TIA/EIA requirements for supporting a wide variety of applications.50 cables per pack.Lifetime limited manufacturer warranty

Deliver high-performance 10 Gigabit network connections, free of noise and EMI/RFI interference. This Cat6a cable meets or exceeds all Category 6a cable specifications to ensure reliable 10Gb network connections. The cable is shielded to protect your network against electromagnetic interference (EMI/RFI) and system noise, providing the perfect solution for fast and safe network connections. Find the length and color you needThis 5-foot black patch cable is perfect for standard applications such as connecting from a wall jack to your laptop docking station or desktop computer. For easier network installations, our Cat6a patch cables are available in a wide variety of lengths and colors. This ensures you have the right size of cable available when you need it and it lets you color code your connections for a more organized setup. Reliable Cat6a 10 Gigabit connectionsEach cable is tested for up to 500MHz frequency and is more than suitable for 10GBase-T Ethernet networks. Constructed with 100% copper and foil-shielded, twisted-pair wiring, this cable was built for quality performance. The cable is designed to keep the data signals traveling through your network free from interference and is perfect in environments that are prone to large amounts of EMI. The 50-micron gold connectors deliver optimum conductivity and eliminate signal loss due to oxidation or corrosion. Snagless RJ45 clips help protect your network connectionsFor trouble-free cable runs, this durable cable features snagless connectors that protect the RJ45 clips during installation, making them less likely to snag or break. The cable also features molded boots which offer connector strain relief by stopping the RJ45 connector termination points from bending at sharp angles. This reduces the risk of damage to the cable, which could decrease network connectivity and performance. The C6ASPAT5BK is backed by StarTech.com's lifetime warranty for guaranteed reliability..Protect your data against noise and EMI/RFI interference.RJ45 connector-clip protectors eliminate cable snags and breaks during installation.Black PVC jacket for color coding your connections

The C2G ® 5' gray Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cable length: 5'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Comes in gray color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.16 lbs..Comes with lifetime warranty.Contact material: 50 micron gold-plated copper alloyCompatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Weight: 0.16 lbs..Comes with lifetime warranty

Deliver high-performance 10 Gigabit network connections, free of noise and EMI/RFI interference. This Cat6a cable meets or exceeds all Category 6a cable specifications to ensure reliable 10Gb network connections. The cable is shielded to protect your network against electromagnetic interference (EMI/RFI) and system noise, providing the perfect solution for fast and safe network connections. Find the length and color you needThis 5-foot blue patch cable is perfect for standard applications such as connecting from a wall jack to your laptop docking station or desktop computer. For easier network installations, our Cat6a patch cables are available in a wide variety of lengths and colors. This ensures you have the right size of cable available when you need it and it lets you color code your connections for a more organized setup. Reliable Cat6a 10 Gigabit connectionsEach cable is tested for up to 500MHz frequency and is more than suitable for 10GBase-T Ethernet networks. Constructed with 100% copper and foil-shielded, twisted-pair wiring, this cable was built for quality performance. The cable is designed to keep the data signals traveling through your network free from interference and is perfect in environments that are prone to large amounts of EMI. The 50-micron gold connectors deliver optimum conductivity and eliminate signal loss due to oxidation or corrosion. Snagless RJ45 clips help protect your network connectionsFor trouble-free cable runs, this durable cable features snagless connectors that protect the RJ45 clips during installation, making them less likely to snag or break. The cable also features molded boots which offer connector strain relief by stopping the RJ45 connector termination points from bending at sharp angles. This reduces the risk of damage to the cable, which could decrease network connectivity and performance. The C6ASPAT5BL is backed by StarTech.com's lifetime warranty for guaranteed reliability..Protect your data against noise and EMI/RFI interference.RJ45 connector-clip protectors eliminate cable snags and breaks during installation.Blue PVC jacket for color coding your connections

The C2G ® 5' yellow Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 5'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in yellow color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.16 lbs..Comes with lifetime warranty

Tripp Lite 5' Molded patch cable in red color has snagless design to protect the locking tabs on the RJ45 male connectors. Cable is constructed from PVC 4-pair stranded UTP and reduces cross-talk or return loss..Red.Category 6 RJ45 Male/RJ45 Male.Snagless, molded.5'.Material: Polyvinyl chloride(PVC) jacket.Conductor: Copper.Applications: Cabling for category 6, category 5e and category 5 applications.Technology: Unshielded twisted pair (UTP).System requirements: For 1000 Base-T (1 Gbps ethernet), 10/100 Base-T (ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice and token ring type 3 applications as well as EIA/TIA applications.Communications: 550 MHz/1 Gbps.All cables feature boots with integral strain-relief and RJ45 (Male) connectors.Shielded RJ45, with 50-micron gold plated contacts, 4-pair 24 AWG stranded STP with drain wire.TSB 568B (AT and T 258A)wiring.Includes 5' Cat6 gray Gigabit patch cord snagless molded.Compliant and standards: IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801, ETL (category 5e draft 11).Warranty: Lifetime limited.Tripp Lite 5' Molded patch cable in red color is rated for 550 MHz/1 Gb/s communications and provides premium cabling for category 6, 5 and 5e applications.

With RJ-45 male-to-male connectors, this high-performance Category 6 UTP Patch Cable is an ideal performance upgrade for any network. PowerSum tested and exceeding performance requirements for Category 6, its internal load bar assures accurate positioning of pairs and consistent high performance. Its 2-row, staggered pin configuration controls cross-talk at hyper-frequencies. Use it to replace any Cat5 cable that fails to support 1000BaseT Gigabit Ethernet..Maximize your network speed with a 7-foot high-bandwidth CAT6 cable..Ideal for VoIP, video, and file transfers.Exceeds 500MHz in performance tests.CAT6 Ethernet patch cable for connecting to LANs or the Internet.Ideal for use with 100-1000BASE-T networks.RJ45 plugs with 50-micron gold-plated connectors for clear signal.4 twisted pairs of stranded copper wires prevent crosstalk.UTP stranded copper wires.Snagless design prevents cracking and breaking.Durable PVC jacket.RJ45 plugs with 50-micron gold-plated connectors.Molded strain relief.Belkin Lifetime Warranty.This cable is perfect for connecting 10/100/1000 networks and capable of improving return loss in your current network by 40%. 50 micron gold-plated connectors ensure clean, clear transmissions.

Tripp Lite Cat6 Snagless molded patch cable is 5' long and has RJ45 male connectors to offer convenient connectivity. Cable has molded connectors featuring integral strain relief. Reduces impedance and structural return loss. With staggered-pin plug design and high-quality copper wire, cable minimizes near-end crosstalk levels. Snagless design protects the locking tabs from damages during installation. PVC 4-pair solid UTP cable provides stable performance up to 550 MHz or 1 Gb/s communication, sold as 50 per pack..Cat6 gigabit snagless molded patch cable offers reliable signal routing.Easy-to-install 5' long cord.RJ45 male-to-male connectors for reliable connection.Ultra flexible PVC jacket offers double shielding against outside noise.High-quality copper wire and a staggered-pin plug construction aids to keep near-end crosstalk levels to a minimum.Comes in blue color for a new look.Meets category 6 cabling standards, premium cabling for category 6.Designed to minimize impedance & structural return loss compared to standard 100MHz wire drastically.Snagless design safeguards the locking tabs on the RJ45 connectors from being damaged off during installation.High-speed Cat6/6e/6a connection solutions to distribute data, voice and video over networks.Meets all requirements and standards of IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801 and ETL.Includes 50 pieces of 3-ft. Blue Cat6 Gigabit snagless molded patch cables.Deliver stable performance up to 550MHz/1 Gb/s communication.Comes with limited lifetime warranty.Tripp Lite N201-005-BL50BP Cat6 5' Blue snagless molded patch cable is perfect for category 6, 5e and 5 applications. Snagless design protects the locking tabs on RJ45 connectors.

Save the time and hassle of building Ethernet cables by using fixed-length UTP Cat6 Ethernet Network Cables from Monoprice! The ZEROboot series of Ethernet cables are designed for IT and data center professionals who prefer interconnect cables without the covers that protect the plug retaining clips, allowing for faster and easier cable connections. Features: Unshielded Twisted Pair (UTP) Category 6 Ethernet cable 24AWG stranded, pure bare copper conductors 550MHz bandwidth No protective plug retaining clip covers 50µm gold plated contacts 5-foot length (tip to tip) Monoprice Ethernet cables are made of 100% pure bare copper wire, as opposed to copper clad aluminum (CCA) wire, and are therefore fully compliant with UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards, which require pure bare copper wire in communications cables..Delivers fast data transfer and optimal signal quality.Constructed with durable materials for long-lasting use.Slim design ensures easy installation and space efficiency

Premium cabling for category 5 and 5e application rated for 350 MHz/1 Gbps communications.Green.Category 5e RJ45 Male/RJ45 Male.Snagless, molded, stranded.5'.Material: Polyvinyl chloride(PVC) jacket.Conductor: Copper.Device supported: Network device.Applications: Computer networking.Technology: Unshielded twisted pair (UTP).System requirements: For 1000Base-T (1Gbps ethernet), 10/100Base-T (ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice and token ring type3 applications.PVC 4-pair stranded UTP.All cables feature boots with integral strain-relief and RJ45 (Male) connectors.Includes 5' green snagless Cat5e patch cable.Compliant and standards: ANSI/EIA/TIA 568/ ISO/IEC 11801/ ETL/ IEEE 802.3ab/ RoHS.Warranty: Lifetime

Monoprice® Flexboot Series 5' Cat6 UTP Ethernet network cable with a data transfer speed of 550 MHz has 50 micrometer gold plated contacts for enhanced conductivity. Cable in gray color has snagless strain relief boots and offers high performance..Gray.Cat6.Fixed length network cables are the perfect combination of value and performance.5'.Gauge: 24 AWG.Cable rating: 550 MHz.Technology: Unshielded twisted pair (UTP).Cables are made of 100% bare copper wire, as opposed to copper clad aluminum (CCA) wire.Each cable features color matched, snagless, strain-relief boots.Device supported: Network device.Certificates & standards: UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards.Monoprice® Flexboot Series 5' Cat6 UTP Ethernet network cable in gray color is constructed from 24 AWG stranded pure bare copper conductor for long lasting durability.