500 Watt Heaters
2 resultsThe Fostoria RPH from TPI Corporation is a line which provides protection against freezing for pump houses, utility rooms, relay stations, construction sheds, and more. It features a stainless steel heating element and single-pole thermostat with a range of 30 to 140 degrees Fahrenheit. Comes with a powder-coated epoxy steel case and aluminum fins. Overheat protection is ensured by a thermal fuse..This floor convection specialty heater provides protection against freezing.Features single-phase electric wiring.Dimensions: 4"H x 20"W x 5.5"D; weight: 5 lbs..Maximum wattage: 500W; maximum heat energy: 1706 Btu/hour.Protection against freezing for pump houses, utility rooms, relay stations, and construction sheds.Provides overheat protection: thermal fuse will instantly shut off the heater to prevent overheating.Meets or exceeds the Intertek and ETL standards.Comes with a stainless steel heating element and aluminum fins.Features a single-pole thermostat with a range of 30 to 140 degrees Fahrenheit.Case is made of steel with a powder-coated epoxy finish.Made in the USA.Power properties: 240V, 2.1A.1-year manufacturer limited warranty.⚠ WARNING:WARNING This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm. For more information go to www.P65Warnings.ca.gov.
The Fostoria RPH series from TPI Corporation is a line which provides protection against freezing for pump houses, utility rooms, relay stations, construction sheds, and more. This pump house ceramic electric heater features a stainless steel heating element and single-pole thermostat with a 30 to 140 degrees Fahrenheit range. It comes with a powder-coated epoxy steel case and aluminum fins. It also includes an overheat protection thermal fuse..This ceramic convection floor heater provides protection against freezing in construction environments.This model features single-phase electric wiring.Dimensions: 4"H x 20"W x 5.5"D, weight: 5 lbs..Maximum wattage: 500W; maximum heat energy: 1706 Btu/hour.Protection against freezing for pump houses, utility rooms, relay stations, construction sheds, and more.Provides overheat protection: heater will instantly shut off to prevent overheating.Meets or exceeds the Intertek and ETL standards.Comes with a stainless steel heating element and aluminum fins.Features a single-pole thermostat with a 30- to 140-degree Fahrenheit range.Protected by a powder-coated epoxy steel case.Contains a thermal fuse for overheat protection.Made in the USA.Power properties: 120V, 4.2A.1-year manufacturer limited warranty.⚠ WARNING:WARNING This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm. For more information go to www.P65Warnings.ca.gov.
You May Also Like
The Fostoria FES portable electric heater from TPI Corporation provides clean, quiet, odor-free, fan-forced heat. It's designed to circulate room air continuously, gradually heating a confined space. The best results will be obtained when using this heater in smaller, insulated spaces. Its features include a yellow safety enclosure with front and rear safety screens, reliable stainless steel finned heating elements, a high-limit temperature switch with automatic reset, an automatic thermostat control with fan-only option, and a long-life motor and fan assembly with sealed bearings. This portable (FES) model comes mounted on a two-wheeled cart, with wheels designed to be easily pushed or pulled over uneven surfaces. All Fostoria FES models come fully assembled, except the handle is attached in a lowered shipping position when shipped from the factory..This portable fan-forced salamander heater provides temporary climate control for interior jobsite heating, as well as assisting drywall and building contractors in drying applications.Three-phase electric heater generates 800 cfm, making it a great alternative to propane and kerosene space heaters.Dimensions: 39"H x 27"W x 21"D; weight: 65 lbs..Maximum wattage: 15000W; maximum heat energy: 51195 Btu/hour.Intended for rooms up to 1500 sq. ft., gradually heating a confined space.Best results will be obtained when using this heater in smaller, insulated spaces and interior jobsites.High-limit temperature switch provides automatic reset.Meets or exceeds the Intertek and ETL standards.Heater housing has a textured yellow powder-coated finish and includes protective guards in a black finish on both the air intake and output openings.Long-life finned tubular heating elements.Control knob allows for fan-only operation and thermostat adjustment from 40 to 100 degrees Fahrenheit.This unit features a built-in rotating stop, allowing housing adjustments for up to 90 degrees from center axis.Includes an access panel for direct wiring connections.10"Dia. industrial heavy-duty wheels and handle for easy portability over all surface types.Optional 25' SO cord ready for plug attachment is available for order.Safe-operating unit: operate the unit overnight to elevate temperature.Made in the USA.Power properties: 240V, 36A.1-year manufacturer limited warranty.⚠ WARNING:WARNING This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm. For more information go to www.P65Warnings.ca.gov.
The Fostoria FES portable electric heater from TPI Corporation provides clean, quiet, odor-free, fan-forced heat. It's designed to circulate room air continuously, gradually heating a confined space. The best results will be obtained when using this heater in smaller, insulated spaces. Its features include a yellow safety enclosure with front and rear safety screens, reliable stainless steel finned heating elements, a high-limit temperature switch with automatic reset, an automatic thermostat control with fan-only option, and a long-life motor and fan assembly with sealed bearings. This portable (FES) model comes mounted on a two-wheeled cart, with wheels designed to be easily pushed or pulled over uneven surfaces. All Fostoria FES models come fully assembled, except the handle is attached in a lowered shipping position when shipped from the factory..This portable fan-forced salamander heater provides temporary climate control for interior jobsite heating, as well as assisting drywall and building contractors in drying applications.Three-phase electric heater generates 800 cfm, making it a great alternative to propane and kerosene space heaters.Dimensions: 39"H x 27"W x 21"D; weight: 65 lbs..Maximum wattage: 15000W; maximum heat energy: 51195 Btu/hour.Intended for rooms up to 1500 sq. ft., gradually heating a confined space.Best results will be obtained when using this heater in smaller, insulated spaces and interior jobsites.High-limit temperature switch provides automatic reset.Meets or exceeds the Intertek and ETL standards.Heater housing has a textured yellow powder-coated finish and includes protective guards in a black finish on both the air intake and output openings.Long-life finned tubular heating elements.Control knob allows for fan-only operation and thermostat adjustment from 40 to 100 degrees Fahrenheit.This unit features a built-in rotating stop, allowing housing adjustments for up to 90 degrees from center axis.Includes an access panel for direct wiring connections.10"Dia. industrial heavy-duty wheels and handle for easy portability over all surface types.Optional 25' SO cord ready for plug attachment is available for order.Safe-operating unit: operate the unit overnight to elevate temperature.Made in the USA.Power properties: 480V, 18A.1-year manufacturer limited warranty.⚠ WARNING:WARNING This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm. For more information go to www.P65Warnings.ca.gov.
The Fostoria FES portable electric heater from TPI Corporation provides clean, quiet, odor-free, fan-forced heat. It's designed to circulate room air continuously, gradually heating a confined space. The best results will be obtained when using this heater in smaller, insulated spaces. Its features include a yellow safety enclosure with front and rear safety screens, reliable stainless steel finned heating elements, a high-limit temperature switch with automatic reset, an automatic thermostat control with fan-only option, and a long-life motor and fan assembly with sealed bearings. This portable (FES) model comes mounted on a two-wheeled cart, with wheels designed to be easily pushed or pulled over uneven surfaces. All Fostoria FES models come fully assembled, except the handle is attached in a lowered shipping position when shipped from the factory..This portable fan-forced salamander heater provides temporary climate control for interior jobsite heating, as well as assisting drywall and building contractors in drying applications.Three-phase electric heater generates 800 cfm, making it a great alternative to propane and kerosene space heaters.Dimensions: 39"H x 27"W x 21"D; weight: 65 lbs..Maximum wattage: 15000W; maximum heat energy: 51195 Btu/hour.Intended for rooms up to 1500 sq. ft., gradually heating a confined space.Best results will be obtained when using this heater in smaller, insulated spaces and interior jobsites.High-limit temperature switch provides automatic reset.Meets or exceeds the Intertek and ETL standards.Heater housing has a textured yellow powder-coated finish and includes protective guards in a black finish on both the air intake and output openings.Long-life finned tubular heating elements.Control knob allows for fan-only operation and thermostat adjustment from 40 to 100 degrees Fahrenheit.This unit features a built-in rotating stop, allowing housing adjustments for up to 90 degrees from center axis.Includes an access panel for direct wiring connections.10"Dia. industrial heavy-duty wheels and handle for easy portability over all surface types.Optional 25' SO cord ready for plug attachment is available for order.Safe-operating unit: operate the unit overnight to elevate temperature.Made in the USA.Power properties: 208V, 42A.1-year manufacturer limited warranty.⚠ WARNING:WARNING This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm. For more information go to www.P65Warnings.ca.gov.
The Fostoria FES portable electric heater from TPI Corporation provides clean, quiet, odor-free, fan-forced heat. It's designed to circulate room air continuously, gradually heating a confined space. The best results will be obtained when using this heater in smaller, insulated spaces. Its features include a yellow safety enclosure with front and rear safety screens, reliable stainless steel finned heating elements, a high-limit temperature switch with automatic reset, an automatic thermostat control with fan-only option, and a long-life motor and fan assembly with sealed bearings. This portable (FES) model comes mounted on a four-wheeled cart, with wheels designed to be easily pushed or pulled over uneven surfaces. All Fostoria FES models come fully assembled, except the handle is attached in a lowered shipping position when shipped from the factory..This portable fan-forced salamander heater provides temporary climate control for interior jobsite heating, as well as assisting drywall and building contractors in drying applications.Three-phase electric heater generates 2200 cfm, making it a great alternative to propane and kerosene space heaters.Weight: 198 lbs..Maximum wattage: 45000W; maximum heat energy: 153585 Btu/hour.Intended for rooms up to 2400 sq. ft., gradually heating a confined space.Best results will be obtained when using this heater in smaller, insulated spaces and interior jobsites.High-limit temperature switch provides automatic reset.Meets or exceeds the Intertek and ETL standards.Heater housing has a textured yellow powder-coated finish and includes protective guards in a black finish on both the air intake and output openings.Long-life finned tubular heating elements.Control knob allows for fan-only operation and thermostat adjustment from 40 to 100 degrees Fahrenheit.Includes an access panel for direct wiring connections.Two 10"Dia. rear wheels, front locking casters, and handle for easy portability over all surface types.Optional 25' SO cord ready for plug attachment is available for order.Safe-operating unit: operate the unit overnight to elevate temperature.Made in the USA.Power properties: 480V, 55.4A.1-year manufacturer limited warranty.⚠ WARNING:WARNING This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm. For more information go to www.P65Warnings.ca.gov.
The Fostoria FES portable electric heater from TPI Corporation provides clean, quiet, odor-free, fan-forced heat. It's designed to circulate room air continuously, gradually heating a confined space. The best results will be obtained when using this heater in smaller, insulated spaces. Its features include a yellow safety enclosure with front and rear safety screens, reliable stainless steel finned heating elements, a high-limit temperature switch with automatic reset, an automatic thermostat control with fan-only option, and a long-life motor and fan assembly with sealed bearings. This portable (FES) model comes mounted on a four-wheeled cart, with wheels designed to be easily pushed or pulled over uneven surfaces. All Fostoria FES models come fully assembled, except the handle is attached in a lowered shipping position when shipped from the factory..This portable fan-forced salamander heater provides temporary climate control for interior jobsite heating, as well as assisting drywall and building contractors in drying applications.Three-phase electric heater generates 2200 cfm, making it a great alternative to propane and kerosene space heaters.Weight: 198 lbs..Maximum wattage: 45000W; maximum heat energy: 153585 Btu/hour.Intended for rooms up to 2400 sq. ft., gradually heating a confined space.Best results will be obtained when using this heater in smaller, insulated spaces and interior jobsites.High-limit temperature switch provides automatic reset.Meets or exceeds the Intertek and ETL standards.Heater housing has a textured yellow powder-coated finish and includes protective guards in a black finish on both the air intake and output openings.Long-life finned tubular heating elements.Control knob allows for fan-only operation and thermostat adjustment from 40 to 100 degrees Fahrenheit.Includes an access panel for direct wiring connections.Two 10"Dia. rear wheels, front locking casters, and handle for easy portability over all surface types.Optional 25' SO cord ready for plug attachment is available for order.Safe-operating unit: operate the unit overnight to elevate temperature.Made in the USA.Power properties: 575V, 46.2A.1-year manufacturer limited warranty.⚠ WARNING:WARNING This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm. For more information go to www.P65Warnings.ca.gov.
The Fostoria FES portable electric heater from TPI Corporation provides clean, quiet, odor-free, fan-forced heat. It's designed to circulate room air continuously, gradually heating a confined space. The best results will be obtained when using this heater in smaller, insulated spaces. Its features include a yellow safety enclosure with front and rear safety screens, reliable stainless steel finned heating elements, a high-limit temperature switch with automatic reset, an automatic thermostat control with fan-only option, and a long-life motor and fan assembly with sealed bearings. This portable (FES) model comes mounted on a two-wheeled cart, with wheels designed to be easily pushed or pulled over uneven surfaces. All Fostoria FES models come fully assembled, except the handle is attached in a lowered shipping position when shipped from the factory..This portable fan-forced salamander heater provides temporary climate control for interior jobsite heating, as well as assisting drywall and building contractors in drying applications.Three-phase electric heater generates 1100 cfm, making it a great alternative to propane and kerosene space heaters.Dimensions: 39"H x 27"W x 23"D; weight: 65 lbs..Maximum wattage: 30000W; maximum heat energy: 102390 Btu/hour.Intended for rooms up to 2000 sq. ft., gradually heating a confined space.Best results will be obtained when using this heater in smaller, insulated spaces and interior jobsites.High-limit temperature switch provides automatic reset.Meets or exceeds the Intertek and ETL standards.Heater housing has a textured yellow powder-coated finish and includes protective guards in a black finish on both the air intake and output openings.Long-life finned tubular heating elements.Control knob allows for fan-only operation and thermostat adjustment from 40 to 100 degrees Fahrenheit.This unit features a built-in rotating stop, allowing housing adjustments for up to 90 degrees from center axis.Includes an access panel for direct wiring connections.10"Dia. industrial heavy-duty wheels and handle for easy portability over all surface types.Optional 25' SO cord ready for plug attachment is available for order.Safe-operating unit: operate the unit overnight to elevate temperature.Made in the USA.Power properties: 600V, 29A.1-year manufacturer limited warranty.⚠ WARNING:WARNING This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm. For more information go to www.P65Warnings.ca.gov.
The Fostoria FES portable electric heater from TPI Corporation provides clean, quiet, odor-free, fan-forced heat. It's designed to circulate room air continuously, gradually heating a confined space. The best results will be obtained when using this heater in smaller, insulated spaces. Its features include a yellow safety enclosure with front and rear safety screens, reliable stainless steel finned heating elements, a high-limit temperature switch with automatic reset, an automatic thermostat control with fan-only option, and a long-life motor and fan assembly with sealed bearings. This portable (FES) model comes mounted on a two-wheeled cart, with wheels designed to be easily pushed or pulled over uneven surfaces. All Fostoria FES models come fully assembled, except the handle is attached in a lowered shipping position when shipped from the factory..This portable fan-forced salamander heater provides temporary climate control for interior jobsite heating, as well as assisting drywall and building contractors in drying applications.Three-phase electric heater generates 1100 cfm, making it a great alternative to propane and kerosene space heaters.Dimensions: 39"H x 27"W x 23"D; weight: 83 lbs..Maximum wattage: 30000W; maximum heat energy: 102390 Btu/hour.Intended for rooms up to 2000 sq. ft., gradually heating a confined space.Best results will be obtained when using this heater in smaller, insulated spaces and interior jobsites.High-limit temperature switch provides automatic reset.Meets or exceeds the Intertek and ETL standards.Heater housing has a textured yellow powder-coated finish and includes protective guards in a black finish on both the air intake and output openings.Long-life finned tubular heating elements.Control knob allows for fan-only operation and thermostat adjustment from 40 to 100 degrees Fahrenheit.This unit features a built-in rotating stop, allowing housing adjustments for up to 90 degrees from center axis.Includes an access panel for direct wiring connections.10"Dia. industrial heavy-duty wheels and handle for easy portability over all surface types.Optional 25' SO cord ready for plug attachment is available for order.Safe-operating unit: operate the unit overnight to elevate temperature.Made in the USA.Power properties: 480V, 36A.1-year manufacturer limited warranty.⚠ WARNING:WARNING This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm. For more information go to www.P65Warnings.ca.gov.
The Fostoria YES suspended electric heater from TPI Corporation provides clean, quiet, odor-free, fan-forced heat. It's designed to circulate room air continuously, gradually heating a confined space. The best results will be obtained when using this heater in smaller, insulated spaces. Its features include a yellow safety enclosure with front and rear safety screens, reliable stainless steel finned heating elements, a high-limit temperature switch with automatic reset, an automatic thermostat control with fan-only option, and a long-life motor and fan assembly with sealed bearings..This wall- or ceiling-mounted fan-forced salamander heater provides temporary climate control for interior jobsite heating, as well as assisting drywall and building contractors in drying applications.One-phase electric heater generates 800 cfm, making it a great alternative to propane and kerosene space heaters.Dimensions: 23"H x 23"W x 21"D; weight: 36 lbs..Maximum wattage: 15000W; maximum heat energy: 51195 Btu/hour.Intended for rooms up to 1500 sq. ft., gradually heating a confined space.Best results will be obtained when using this heater in smaller, insulated spaces and interior jobsites.High-limit temperature switch provides automatic reset.Meets or exceeds the Intertek and ETL standards.Heater housing has a textured yellow powder-coated finish and includes protective guards in a black finish on both the air intake and output openings.Long-life finned tubular heating elements.Control knob allows for fan-only operation and thermostat adjustment from 40 to 100 degrees Fahrenheit.This model is shipped with the following items: 1 x wall/ceiling bracket, 1 x hanger, 4 x steel washers, 2 x knobs, 2 x rubber washers, 1 x rotating stop (top), 1 x nut stop (1/2-13 thread), 1 x bolt (1/2-13 thread x 1.5"), 1 x nylon washer, 2 x rotating stops (side).Includes an access panel for direct wiring connections.Mounting bracket is made of steel and comes with a textured black powder-coated finish.Unit is ready for direct wiring.Safe-operating unit: operate the unit overnight to elevate temperature.Made in the USA.Power properties: 240V, 63A.1-year manufacturer limited warranty.⚠ WARNING:WARNING This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm. For more information go to www.P65Warnings.ca.gov.
The Fostoria YES suspended electric heater from TPI Corporation provides clean, quiet, odor-free, fan-forced heat. It's designed to circulate room air continuously, gradually heating a confined space. The best results will be obtained when using this heater in smaller insulated spaces. Its features include a yellow safety enclosure with front and rear safety screens, reliable stainless steel finned heating elements, a high-limit temperature switch with automatic reset, an automatic thermostat control with fan-only option, and a long-life motor and fan assembly with sealed bearings..This wall- or ceiling-mounted fan-forced salamander heater provides temporary climate control for interior jobsite heating, as well as assisting drywall and building contractors in drying applications.Three-phase electric heater generates 800 cfm, making it a great alternative to propane and kerosene space heaters.Dimensions: 23"H x 23"W x 36"D; weight: 60 lbs..Maximum wattage: 15000W; maximum heat energy: 51195 Btu/hour.Intended for rooms up to 1500 sq. ft., gradually heating a confined space.Best results will be obtained when using this heater in smaller insulated spaces and interior jobsites.High-limit temperature switch provides automatic reset.Meets or exceeds the Intertek and cETLus standards.Heater housing has a textured yellow powder-coated finish and includes protective guards in a black finish on both the air intake and output openings.Long-life finned tubular heating elements.Control knob allows for fan-only operation and thermostat adjustment from 40 to 100 degrees Fahrenheit.This model is shipped with the following items: wall/ceiling bracket, hanger, four steel washers, two knobs, two rubber washers, rotating stop (top), nut stop (1/2-13 thread), bolt (1/2-13 thread x 1.5"), nylon washer, two rotating stops (side).Includes an access panel for direct wiring connections.Mounting bracket is made of steel and comes with a textured black powder-coated finish.Unit is ready for direct wiring.Safe-operating unit: operate the unit overnight to elevate temperature.Made in the USA.Power properties: 240V, 36A.1-year manufacturer limited warranty.⚠ WARNING:WARNING This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm. For more information go to www.P65Warnings.ca.gov.
The Fostoria YES suspended electric heater from TPI Corporation provides clean, quiet, odor-free, fan-forced heat. It's designed to circulate room air continuously, gradually heating a confined space. The best results will be obtained when using this heater in smaller insulated spaces. Its features include a yellow safety enclosure with front and rear safety screens, reliable stainless steel finned heating elements, a high-limit temperature switch with automatic reset, an automatic thermostat control with fan-only option, and a long-life motor and fan assembly with sealed bearings..This wall- or ceiling-mounted fan-forced salamander heater provides temporary climate control for interior jobsite heating, as well as assisting drywall and building contractors in drying applications.Three-phase electric heater generates 800 cfm, making it a great alternative to propane and kerosene space heaters.Dimensions: 23"H x 23"W x 36"D; weight: 60 lbs..Maximum wattage: 15000W; maximum heat energy: 51195 Btu/hour.Intended for rooms up to 1500 sq. ft., gradually heating a confined space.Best results will be obtained when using this heater in smaller insulated spaces and interior jobsites.High-limit temperature switch provides automatic reset.Meets or exceeds the Intertek and ETL standards.Heater housing has a textured yellow powder-coated finish and includes protective guards in a black finish on both the air intake and output openings.Long-life finned tubular heating elements.Control knob allows for fan-only operation and thermostat adjustment from 40 to 100 degrees Fahrenheit.This model is shipped with the following items: wall/ceiling bracket, hanger, four steel washers, two knobs, two rubber washers, rotating stop (top), nut stop (1/2-13 thread), bolt (1/2-13 thread x 1.5"), nylon washer, two rotating stops (side).Includes an access panel for direct wiring connections.Mounting bracket is made of steel and comes with a textured black powder-coated finish.Unit is ready for direct wiring.Safe-operating unit: operate the unit overnight to elevate temperature.Made in the USA.Power properties: 208V, 42A.1-year manufacturer limited warranty.⚠ WARNING:WARNING This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm. For more information go to www.P65Warnings.ca.gov.
The Fostoria YES suspended electric heater from TPI Corporation provides clean, quiet, odor-free, fan-forced heat. It's designed to circulate room air continuously, gradually heating a confined space. The best results will be obtained when using this heater in smaller insulated spaces. Its features include a yellow safety enclosure with front and rear safety screens, reliable stainless steel finned heating elements, a high-limit temperature switch with automatic reset, an automatic thermostat control with fan-only option, and a long-life motor and fan assembly with sealed bearings..This wall- or ceiling-mounted fan-forced salamander heater provides temporary climate control for interior jobsite heating, as well as assisting drywall and building contractors in drying applications.Three-phase electric heater generates 800 cfm, making it a great alternative to propane and kerosene space heaters.Dimensions: 23"H x 23"W x 36"D; weight: 60 lbs..Maximum wattage: 15000W; maximum heat energy: 51195 Btu/hour.Intended for rooms up to 1500 sq. ft., gradually heating a confined space.Best results will be obtained when using this heater in smaller insulated spaces and interior jobsites.High-limit temperature switch provides automatic reset.Meets or exceeds the Intertek and ETL standards.Heater housing has a textured yellow powder-coated finish and includes protective guards in a black finish on both the air intake and output openings.Long-life finned tubular heating elements.Control knob allows for fan-only operation and thermostat adjustment from 40 to 100 degrees Fahrenheit.This model is shipped with the following items: wall/ceiling bracket, hanger, four steel washers, two knobs, two rubber washers, rotating stop (top), nut stop (1/2-13 thread), bolt (1/2-13 thread x 1.5"), nylon washer, two rotating stops (side).Includes an access panel for direct wiring connections.Mounting bracket is made of steel and comes with a textured black powder-coated finish.Unit is ready for direct wiring.Safe-operating unit: operate the unit overnight to elevate temperature.Made in the USA.Power properties: 480V, 18A.1-year manufacturer limited warranty.⚠ WARNING:WARNING This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm. For more information go to www.P65Warnings.ca.gov.
The Fostoria FSP from TPI Corporation is a heavy-duty portable heater designed to provide electric infrared heat where permanently installed heaters are not practical or economical. It is easily transported to the worksite and connected to disconnect switches or lighting centers. The unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses. It operates cleanly, emitting no fumes or odors. Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit..This heater with flat-panel emmiter is designed to provide electric infrared heat where permanently installed heaters are not practical or economical.Single- or three-phase electric wiring.Dimensions: 46.25"H x 11.5"W x 14.5"D; weight: 23 lbs..Maximum wattage: 3150W; maximum heat energy: 10749 Btu/hour.High-density radiant heat with medium wavelength and 60-degree symmetric heat pattern; intended for 125 sq. ft. (on semi-protected area with temperatures measuring -35 degrees Fahrenheit and above).Unit is suited to a wide variety of indoor and protected outdoor commercial or industrial uses.Can be easily transported to the worksite and connected to disconnect switches or lighting centers.Heater operates cleanly, emitting no fumes or odors.Aluminized steel base, large carry handle, and gold-tone anodized aluminum housing for efficient, long-term reflectivity and corrosion resistance.Factory-installed heavy-duty wire guard.Rugged emitter element, great for high-vibration areas.Applications where combustible materials and/or personnel will be located near this heater require the addition of a ground-fault sensing switch as part of the electrical circuit.Flat panel emitter operates at a radiant efficiency of 78.5% with 480V.Element life expectancy: 25000 hours.Made in the USA.1-year manufacturer limited warranty.⚠ WARNING:WARNING This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm. For more information go to www.P65Warnings.ca.gov.
The TPI Fostoria® E391560P 5120 BTU rated portable hydronic baseboard electric heater in white color, has heavy-duty cabinet construction with nickel-chrome alloy element/porcelain end caps. It includes manual reset limit control, 2 stage thermostat, positive on/off switch and a heavy-duty carry handle for ease. The electric heater operates at a voltage rating of 120 V, current rating of 12.5/6.25 A and power rating of 1500/750 W. It is suitable for indoor applications..Dimensions: 9"H x 73"W x 4"D.BTU: 5120.Voltage: 120 V, current: 12.5/6.25 A.Wattage: 1500/750 W, number of phase: 1.Comes in white finish.Manual reset limit control.Two stage thermostat.Positive On/Off switch.Heavy-duty cabinet construction.Nickel-chrome alloy element/porcelain end caps.Includes heavy-duty carry handle.Weight: 35 lbs..Comes with 1 year warranty.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For information go to www.P65Warnings.ca.gov.White 5120 BTU 120 V portable hydronic baseboard electric heater features manual reset limit control and heavy duty cabinet construction.
The Fostoria YES suspended electric heater from TPI Corporation provides clean, quiet, odor-free, fan-forced heat. It's designed to circulate room air continuously, gradually heating a confined space. The best results will be obtained when using this heater in smaller insulated spaces. Its features include a yellow safety enclosure with front and rear safety screens, reliable stainless steel finned heating elements, a high-limit temperature switch with automatic reset, an automatic thermostat control with fan-only option, and a long-life motor and fan assembly with sealed bearings..This wall- or ceiling-mounted fan-forced salamander heater provides temporary climate control for interior jobsite heating, as well as assisting drywall and building contractors in drying applications.Three-phase electric heater generates 1100 cfm, making it a great alternative to propane and kerosene space heaters.Dimensions: 23"H x 23"W x 38"D; weight: 72 lbs..Maximum wattage: 30000W; maximum heat energy 102390 Btu/hour.Intended for rooms up to 2000 sq. ft., gradually heating a confined space.Best results will be obtained when using this heater in smaller insulated spaces and interior jobsites.High-limit temperature switch provides automatic reset.Meets or exceeds the cETLus and Intertek standards.Heater housing has a textured yellow powder-coated finish and includes protective guards in a black finish on both the air intake and output openings.Long-life finned tubular heating elements.Control knob allows for fan-only operation and thermostat adjustment from 40 to 100 degrees Fahrenheit.This model is shipped with the following items: wall/ceiling bracket, hanger, four steel washers, two knobs, two rubber washers, rotating stop (top), nut stop (1/2-13 thread), bolt (1/2-13 thread x 1.5"), nylon washer, two rotating stops (side).Includes an access panel for direct wiring connections.Mounting bracket is made of steel and comes with a textured black powder-coated finish.Unit is ready for direct wiring.Safe-operating unit: operate the unit overnight to elevate temperature.Made in the USA.Power properties: 480V, 36A.1-year manufacturer limited warranty.⚠ WARNING:WARNING This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium, which is known to the State of California to cause birth defects and/or reproductive harm. For more information go to www.P65Warnings.ca.gov.
The TPI Fostoria® OCH46120VSSE 5120 BTU rated quartz electric infrared heater in stainless steel color, has 24-gauge, corrosion resistant stainless steel construction for long-life durability. It operates at a voltage rating of 120 V, current rating of 12.5 A and power rating of 1500 W. The electric heater includes adjustable mounting brackets, vertical mounting brackets, wire guards, thermostats, SCR controllers, power contactor panels, gold anodized aluminum reflector and end caps. It is suitable for suspended, totally exposed outdoor and indoor spot heating applications..Dimensions: 48"H x 5 3/8"W x 6 1/2"D.BTU: 5120.Voltage: 120 V, current: 12.5 A.Wattage: 1500 W.Connection: Hard wire.Finish: stainless steel.Mounting: Chain, surface.Listed for suspended, totally exposed (outdoor) and indoor spot heating applications.60-deg symmetric heat pattern.Gold anodized aluminum reflector and end caps.Supplied mounting brackets which allow up to a 45 degrees horizontal tilt adjustment.Electrical enclosure assembled to the end of the heater housing and two 6" long lead wires for direct field connection.Includes adjustable mounting brackets, vertical mounting brackets, wire guards, thermostats, SCR controllers and power contactor panels.Weight: 10 lbs..Comes with 1 year warranty.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For information go to www.P65Warnings.ca.gov.Stainless steel 5120 BTU 120 V outdoor/indoor rated quartz electric infrared heater features listed for suspended, totally exposed and indoor spot heating applications and 60 deg symmetric heat pattern.
The TPI Fostoria® OCH46120VSSE 5120 BTU rated quartz electric infrared heater in brown color, has 24-gauge, corrosion resistant stainless steel construction for long-life durability. It operates at a voltage rating of 120 V, current rating of 12.5 A and power rating of 1500 W. The electric heater includes adjustable mounting brackets, vertical mounting brackets, wire guards, thermostats, SCR controllers, power contactor panels, gold anodized aluminum reflector and end caps. It is suitable for suspended, totally exposed outdoor and indoor spot heating applications..Dimensions: 48"H x 5 3/8"W x 6 1/2"D.BTU: 5120.Voltage: 120 V, current: 12.5 A.Wattage: 1500 W.Connection: Hard wire.Finish: brown.Mounting: Chain, surface.Listed for suspended, totally exposed (outdoor) and indoor spot heating applications.60-deg symmetric heat pattern.Gold anodized aluminum reflector and end caps.Supplied mounting brackets which allow up to a 45 degrees horizontal tilt adjustment.Electrical enclosure assembled to the end of the heater housing and two 6" long lead wires for direct field connection.Includes wire guards, thermostats, SCR controllers and power contactor panels.Weight: 10 lbs..Comes with 1 year warranty.⚠ WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer, and chromium which is known to the State of California to cause birth defects and/or reproductive harm. For information go to www.P65Warnings.ca.gov.Brown 5120 BTU 120 V outdoor/indoor rated quartz electric infrared heater features listed for suspended, totally exposed and indoor spot heating applications and 60 deg symmetric heat pattern.