8-Port Routers
6 resultsCompact Cloud Gateway with 30+ UniFi device / 300+ client support, 1 Gbps IPS routing, and multi-WAN load balancing..Offers high performance and reliable connectivity to the Internet and other offices.With Gigabit Ethernet, retrieve up to 10x faster than standard Ethernet connectivity and provides high-performance.With 10/100/1000Base-T technology, get up to 1000 mbps data transfer rate over twisted pair cable.Runs UniFi Network for full-stack network management.Multi-WAN load balancing.USB-C powered (adapter included)
The JuniperĀ® 8-Port desktop Gigabit Ethernet gateway security appliance in grey, supports DHCP client/server/relay, DNS, DDNS, real time performance monitoring (RPM) and Ipmonitoring protocols. With 4GB RAM and 8GB flash memory, this appliance has six RJ-45, two SFP (mini-GBIC), one USB 3.0, one console and two mini PIM interfaces/ports. The appliance supports 256-bit AES, 256-bit SHA, DES, IKE, IKEv2, MD5, PKI, SHA-1, SSL and Triple DES encryption algorithms. This security appliance supports routing protocols such as IPv4, IPv6, ISO, CLNS, RIP v1/v2, OSPF/OSPF v3, BGP with Route Reflector and IS-IS. The appliance works with SSH, Telnet, SNMP, smart image download, CLI and Web UI, Junos space and security director, Python, Junos OS event, commit and OP script..Gateway security appliance prevents dangerous applications and malicious websites.Dimensions: 1.73"H x 11.81"W x 7.52"D.Color: Gray.Interfaces/ports: Six RJ-45, two SFP (mini-GBIC), one USB 3.0, one console, one mini PIM.Memory: 4GB (RAM), 8GB (flash), Form factor: Desktop.Encryption algorithm: 256-bit AES, 256-bit SHA, DES, IKE, IKEv2, MD5, PKI, SHA-1, SSL, Triple DES.Power: 180 W (PoE), Consumption: 27 - 112 W, 0.473 - 2.07 A (current), Heat dissipation: 157 - 755 BTU/hr.Network: IEEE 802.1p, IEEE 802.1x, Ethernet, Fast Ethernet, Frame Relay, Gigabit Ethernet, HDLC, MLFR, MLPPP, PPP.Performance: 200 Kpps (firewall throughput), 500 Mbps (IMIX), 80 Mbps (IPSec), 250 Mbps (1400-byte packet size), 100 Mbps (IPS throughput),.Routing protocols: IPv4, IPv6, ISO, CLNS, RIP v1/v2, OSPF/OSPF v3, BGP with Route Reflector, IS-IS.QoS 802.1p, DiffServ code point (DSCP), EXP, marking, policing and shaping, classification and scheduling, WRED, Ingress traffic policing.Switching: ASIC-based layer 2 forwarding, MAC address learning, IRB, link aggregation and LACP, LLDP and LLDP-MED, STP, MVRP, 802.1X authentication.VPN generic routing encapsulation (GRE), IP-IP, Ipsec, site-site IPsec VPN, auto VPN, IPsec crypto algorithms, multi-proxy ID for site-site VPN.Dynamic host configuration protocol (DHCP) client/server/relay, DNS, DDNS, real time performance monitoring (RPM) and IP monitoring.Virtual router redundancy protocol, dial on-demand backup interfaces and IP monitoring with route and interface failover.Temperature: 32 to 104 deg F (operating), Humidity: 10 - 90 % non-condensing (operating).Supports SSH, Telnet, SNMP, smart image download, CLI and Web UI, Junos space and security director, Python, Junos OS event, commit and OP script.Meets FCC Class A certified, RoHS2 standards and certifications.Weight: 3.28 - 3.4 lbs.
Dream Machine Special Edition boasts enterprise-grade, rack-mount UniFi Cloud Gateway with full UniFi application support, 10 Gbps performance, and an integrated PoE switch.Includes full UniFi application suite for device management.Integrated 8-port PoE/PoE+ switch.1.3" touchscreen.128 GB SSD & 3.5" HDD bay
The JuniperĀ® SRX340-SYS-JB line of service gateway for the branch provides excellent security and networking solution. This gateway with eight ports support the changing needs of cloud-enabled enterprise networks. It has 4GB RAM and 8GB flash memory for i.Line of Service gateway has 8 ports.Dimensions: 1.72"H x 17.36"W x 14.57"D.Comes in 1U rack mountable form factor and provides wired connectivity.Provides (16) 1GbE onboard & MACsec, (8) 1GbE onboard RJ-45 & SFP transceiver, (1) 1GbE OOB management port, (4) RJ-45 & miniUSB connectivity.Has 4GB RAM and 8GB flash memory with 1 SSD slot.WAN interface: T1/E1 MPIM, VDSL2 Annex A/M MPIM, serial MPIM, 4G / LTE MPIM.Power supply: Internal AC, 1.364 A current consumption, 122 W consumption, 420 BTU/hr heat dissipation.Acoustic noise level: 45.5 dBA, airflow/cooling: Front to back, MTBF: 27 years.Provides Gigabit Ethernet, HDLC, MLFR, MLPPP and PPP data link protocols to support 3 Gbps of data transfer rate.Network transport protocol: DDNS, DHCP, DNS, IPSec, PPPoE, RSVP, Routing protocol: BGP, DVMRP, ECMP, IGMP, IS-IS, MPLS, MSDP, OSPF, OSPFv3, PIM-SSM.Features 256 bit AES, 256 bit SHA, DES, IKE, IKEv2, MD5, PKI, SHA-1, SSL and Triple DES encryption algorithm with CLI, HTTP, SNMP, SSH and Telnet.Performance: 1000000 IPv4 routing & 600000 IPv6 routing table entries, 256000 concurrent sessions, 2000 security policies, 15000 MAC addresses.Performance: 1024 IPSec VPN tunnels, 512 GRE tunnels, 64 security zones, 100 maximum number of users, virtual interfaces, virtual routers.Features high performance, business continuity, end user experience, highly secure, threat protection, easy to manage and scale, minimize TCO.Temperature: 32 to 104 deg F (operating), 10 to 90% (humidity).Meets FCC class A, RoHS 2, NDPP, VPNEP, FWEP and IPSEP standards.Weight: 10.8 lbs.
The Opengear ACM7008-2-M 8-port remote site gateway with smart OOB, is ideal for remote management. It features 800 MHz Armada 370 ARMv7 SoC processor with 256MB DDR3 SDRAM/32MB embedded NOR flash/4GB NAND flash internal memory. This gateway has an integrated console server manage router, switch and firewall serial & USB consoles. It features two 10/100/1000 Ethernet/SFP uplink, four USB 2.0 console ports and 4 to 8 x serial RJ-45 ports for reliable connectivity. This gateway supports HTTPS/SNMP/SSH/TFTP remote management protocol and DDNS/DHCP/FTP/IPSec/NTP network transport protocol. It Includes rack mount kit two ears and screws, digital input/output black terminal block, DB9F-RJ45 adapter, four rubber feet, 12 VDC universal power supply and quick start guide..Site gateway for remote management.Dimensions: 1.4"H x 5.1"W x 5.1"D.Power supply: 110 - 240 VAC to 12 VDC, 11.5 W consumption, external power adapter.Interfaces/ports: Two 10/100/1000 Ethernet/SFP uplink, four USB 2.0 console ports, 4 to 8 x serial RJ-45 ports.Form factor: Rail-mount.Processors: 800 MHz Armada 370 ARMv7 SoC (Marvell 88F6W11), 256MB DDR3 SDRAM, 32MB embedded NOR flash, 4GB NAND flash internal memory.Remote management protocol: HTTPS, SNMP, SSH, TFTP.Network transport protocol: DDNS, DHCP, FTP, IPSec, NTP.Encryption algorithm: SSH, FIPS-140-2 compliant Open SSL Module, AAA - TACACS+, RADIUS, Active Directory/OpenLDAP, Kerberos, with local fallback.Automatically detect and recover from network outages and repair equipment faults.Integrated console server manage router, switch and firewall serial & USB consoles.Built-in digital I/O and high voltage I/O and flexibility with built-in 4 USB console ports.Temperature: -25 to 60 deg C operating, -40 to 75 deg C storage.Includes rack mount kit two ears and screws, digital i/o black terminal block, DB9F-RJ45 adapter, four rubber feet, 12 VDC universal power supply.Meets CE, UL 1950, TUV, C-Tick, RoHS certifications and standards.Weight: 1.3 lbs..Comes with 4 years hardware warranty
The growing number of connected personal and IoT devices has led to an overall increase in network density that is pushing the limits of the current WiFi standard. The latest 802.11ax standard provides future-proof technologies, higher network efficiency, faster WiFi speeds, greater coverage and improved battery life for connected devices, providing a significantly better networking experience for users. RT-AX89X is a 8x8 dual-band WiFi router that provides 1024-QAM for dramatically faster wireless connections. With a total networking speed of about 6000Mbps ā 1148Mbps on the 2.4GHz band and 4804Mbps on the 5GHz band ā RT-AX89X is up to 2.8X faster than 802.11ac 4x4 dual-band routers. The RT-AX89X comes with two 10G ports, one Base-T and SFP+ port, which means both fiber and copper 10G connections are supported. Capture ISP advertised speeds or use your own 10G LAN network between PCs and NAS. The dedicated gaming port on RT-AX89X automatically prioritizes any wired device connected to it. No complex configuration is needed, just connect your gaming PC or console to the special LAN port to give you a fast, stable connection that's always at the head of the queue..Warp-speed Wi-Fi: RT-AX89X is a dual-band Wi-Fi router that provides 1024-QAM for dramatically faster wireless connections. With a total networking speed of about 6000Mbps - 1148Mbps on the 2.4GHz band and 4804Mbps on the 5GHz band - RT-AX89X is faster than 802.11ac 4x4 dual-band routers..802.11ax Wi-Fi standard for better efficiency and throughput.12-stream 6000Mbps Wi-Fi speed to handle even the busiest network.8 antennas and 8 LAN ports to support more clients at the same time.Ultra-fast wired speed: The RT-AX89X comes with two 10G LAN/WAN ports, one Base-T and SFP+ port, which means both fiber and copper 10G connections are supported. Capture ISP advertised speeds or use your own 10G LAN network between PCs and NAS..Wireless that's as stable as wired Ethernet: When you are far away from your router, enjoying the stability of a wired network connection is usually impractical or impossible. With special designed antennas, RT-AX89X provides a wide coverage and a stable signal, letting you enjoy a reliable and smooth connection for gaming or work anywhere in your home..Enjoy faster data transfer speeds for bandwidth-demanding tasks with 10GBase-T and 10G SFP+ networking technology ports.Commercial-grade Security - AiProtection Pro, powered by Trend Microā¢, blocks internet security threats for all your connected smart devices.Extreme 2.2GHz quad-core power: RT-AX89X features a 2.2GHz quad-core CPU that is more powerful than many desktop processors. With its incredible performance, RT-AX89X maximizes throughput for the perfect networking performance, accelerates USB data transfers, and more..Built for multi-device households: With a revolutionary combination of OFDMA and MU-MIMO technology, 802.11ax technology provides greater network capacity and efficiency in traffic-dense environments..WiFi Data Rate: 802.11a : up to 54 Mbps, 802.11b : up to 11 Mbps, 802.11g : up to 54 Mbps, WiFi 4 (802.11n) : up to 600 Mbps, WiFi 5 (802.11ac) : up to 1000 Mbps, WiFi 5 (802.11ac) : up to 4333 Mbps, WiFi 6 (802.11ax) (2.4GHz) : up to 1148 Mbps, WiFi 6 (802.11ax) (5GHz) : up to 4804 Mbps.Transmit / Receive: 2.4GHz 4x4, 5GHz 8x8.Processor: 2.2GHz quad-core processor.Memory: 256 MB Flash, 1 GB RAM.I/O Ports: RJ45 for 10Gbps BaseT for WAN/LAN x 1, RJ45 for 1Gbps BaseT for LAN x 8, RJ45 for 1Gbps BaseT for WAN x 1, USB 3.1 Gen 1 x 2, SFP+ x 1.Power Supply: AC Input : 110V~240V(50~60Hz), DC Output : 19V 3.42A.WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.12-stream AX6000 Dual Band WiFi 6 (802.11ax) Router supporting MU-MIMO and OFDMA technology, with AiProtection Pro network security powered by Trend Microā¢and Adaptive QoS
You May Also Like
The Linksys SE3008 eight-port Gigabit Ethernet switch is an unmanaged switch that offers a quick and easy solution to extend your office network with a plug-and-play installation. This switch is also useful in transferring data across a local network at up to Gigabit speeds. Innovative power-saving features reduce power usage for unused ports and short cable runs. QoS traffic management and plug-and-play function allow you to quickly and easily expand the wired connections in your home..Unmanaged plug-and-play desktop/wall-mountable Gigabit Ethernet switch offers a quick and easy solution to extend your office network with a plug-and-play installation.Features eight Gigabit Ethernet (10/100/1000) ports.Dimensions: 1.02"H x 6.06"W x 3.35"D.Innovative power-saving features reduce power usage for unused ports and short cable runs.Supports IEEE 802.3, 802.3u, 802.3x, 802.3ab, and 802.3az protocols.QoS traffic management and plug-and-play function allow you to quickly and easily expand the wired connections in your home.Power input: 100-240VAC, 50-60Hz.Package contents: a switch, 5VDC/1A power adapter, wall-mount kit, four rubber pads, and quick install guide.1-year manufacturer limited warranty
Create your own LAN and connect your PC, laptop, printer and other peripherals with the help of 4 ports..Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.Optimize the performance of business networks with 10 Gigabit Ethernet connectivity.Layer 2 switch provides a complete lineup of features including IGMP snooping, port mirroring, and spanning tree.Managed switch provides a reliable foundation for your network
The Aruba 6300M switch series is a modern, flexible, and intelligent family of AOS-CX stackable switches perfect for access, aggregation and data center top-of-rack (TOR) deployments. With a cloud-centric design that combines a fully programmable OS with the Aruba network analytics engine, the Aruba 6300M extends industry-leading monitoring and troubleshooting capabilities to the access layer. Support of Aruba NetEdit and the Aruba CX mobile app verify that configurations are flawless and easy to deploy. A powerful Aruba Gen7 ASIC architecture delivers fast, non-blocking performance, meaning your network is ready for tomorrow's unpredictable demands. Aruba Virtual Stacking Framework (VSF) allows for stacking of up to 10 switches, providing scale and simplified management..Stackable switch is perfect for enterprise network access, aggregation, core and data center top-of-rack deployments.Features 48 x 1/2.5/5GbEBASE-T PoE and 4 x 1/10/25/50G SPF ports.Management security restricts access to critical configuration commands, provides multiple privilege levels with password protection, and local/remote syslog capabilities allow logging of all access.Throughput: 654Mpps.Dimensions: 1.73"H x 17.4"W x 15.2"D.Power consumption: 193-201W with JL086A, JL087A, JL670A PSU; switching capacity: 880Gbps.Certifications and standards: Meets or exceeds UL, FCC standards.Allows for stacking of up to 10 switches, providing scale and simplified management.Stackable layer 3 switch with BGP, EVPN, VXLAN, VRF, and OSPF with robust security and QoS.Provides NetEdit support for automation, configuration, verification, and one-touch deployment with the mobile app.Offers redundancy and PoE customization with hot-swappable power supplies and fans.Memory and processor: 1.8GHz quad-core ARM Cortex-A72; 8GB DDR4 and 32GB eMMC with 8MB shared packet buffer memory.Class 6 PoE ports supporting up to 60W per port.Switch has two fan tray slots and comes with one fan tray installed.Lifetime manufacturer limited warranty
10/100/1000MBps.Connect computers and other devices so data can be shared at the highest speeds.Compatible with virtually any major network operating system.Accelerate your desktop network with Gigabit connectivity for up to 8 devices.All ports have auto speed negotiation and auto MDI/MDI-X crossover detection
Juniper Networks EX3400 Ethernet Switch delivers a high-performance, flexible, and cost-effective solution for today's most demanding converged data, voice, and video enterprise access environments.To simplify network operations, the EX3400 is hardware-ready to act as a satellite device to Fusion Enterprise deployment, which can combine several wiring closets into one logical management platform. The EX3400 also supports Juniper Networks Virtual Chassis technology, allowing up to 10 switches to be interconnected over uplink ports and managed as a single device, delivering a scalable, pay-as-you-grow solution for expanding network environments..Features 48 networking ports to meet the requirements of the most demanding workgroups.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.Optimize the performance of business networks with 10 Gigabit Ethernet connectivity.Can work as layer 3 routing for scalable network design.Management capability provides control over setup and configuration of your network.Built-in power supply to ensure all components are being supplied with accurate voltage.Rack mounting enables you to organize wires & secure cables for professional installation
Juniper Networks EX3400 Ethernet Switch delivers a high-performance, flexible, and cost-effective solution for today's most demanding converged data, voice, and video enterprise access environments.To simplify network operations, the EX3400 is hardware-ready to act as a satellite device to Fusion Enterprise deployment, which can combine several wiring closets into one logical management platform. The EX3400 also supports Juniper Networks Virtual Chassis technology, allowing up to 10 switches to be interconnected over uplink ports and managed as a single device, delivering a scalable, pay-as-you-grow solution for expanding network environments..Features 48 networking ports to meet the requirements of the most demanding workgroups.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network.Gigabit Ethernet port for ultra-fast network speeds.Supports layer 3 switching for enhanced performance and usability.Management capability provides control over setup and configuration of your network.Built-in power supply to ensure all components are being supplied with accurate voltage
Supports the needs of edge networking and automated management of prioritized voice, video, and data traffic..8 Gigabit Ethernet ports.Management software with easy-to-use GUI interface offers refined control for secure setup, access, and SNMP (NMS 300) management..The fanless design means zero added noise wherever its located, making it ideal for noise-sensitive environments.Designed to optimize power usage lowering its cost to operate. Most models are compliant with IEEE802.3az Energy Efficient Ethernet mode..Every NETGEAR Network switch is rigorously tested for reliability, quality, and performance..Dimensions in Inches: 6.2L x 4W x 1.1H; Weight in Pounds: 1
Netgear 300 Series Gigabit Ethernet unmanaged switches provide easy, reliable, and affordable network connectivity for home and small offices. They are easy to use, reliable, and rugged with metal enclosures. With these unmanaged plug-and-play switches, you can expand your network connections to multiple devices instantly.This unmanaged switch includes eight 10/100/1000Mbps ports.Provides up to 16Gbps of non-blocking bandwidth.Install your switch on your desktop, or mount it to your wall.Offers 802.1p QoS for traffic/frame prioritization.Non-blocking switching architecture for maximum throughput at wire speed.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Meets or exceeds the CE, FCC, IC, RCM, VCCI, KC, CB, and CE LVD standards.Auto MDI/MDIX eliminates the need for crossover cables.LED indicators for ease of use.Fanless design for silent operation.Auto negotiation for automatic connection at the highest common speed between the switch and end device.Fanless design for silent operation.Plug-and-play feature allows you to easily set up the switch: no software or configuration is necessary, and maintenance is next to zero.Durable and rugged metal case for long-lasting use.Perfect for small office and home networks.Standards-based technology ensures interoperability with any standards-based devices in the existing network.3-year manufacturer limited warranty
8 x 10/100/1000Base-T.128KB buffer.Auto MDI/MDIX adjustment for all ports.Data transfer rate: 2000 Mbps (full-duplex).Filtering address table: 8K MAC entries/device.Dimensions: 1.1"(H) x 6.3"(W) x 4"(D).Power: External 5 V/1 A Level "V" power adapter, power consumption: 0.55 W power on, 2.8 W max.Media type supported: Cat 5 twisted-pair, Packet filtering/forwarding rates: 1,488,000 pps/port, MTBF: 2,053,751 hours.Protocol: CSMA/CD, topology: Star, Transmission method: Store-and-forward.LED indicators:/port: Link/Activity/Speed,/device: power.Management: QoS: 802.1p (4 Queues).Layer supported: 2.Supports jumbo frame packets (max size up to 9.6KB).Free technical support.Temperature: 0 - 50 deg C (operating), -10 - 70 deg C (storage), humidity: 10 - 90 % non-condensing (operating), 5 - 90 % non-condensing (storage).Heat dissipation: 3.41 BTU/h AC power on, 9.548 BTU/h DC max.Network technology: 10/100/1000Base-T Gigabit Ethernet.Certification & standards: FCC Class B, ICES-003 Class B, CE Class B, C-Tick Class B, VCCI Class B, cUL, CB, IEEE 802.3 10Base-T, IEEE 802.3ab 1000Base-T, ANSI/IEEE 802.3 NWay auto-negotiation, IEEE 802.3x Flow Control, IEEE 802.1p QoS, IEEE 802.3az.Certification & standards: FCC Class B, ICES-003 Class B, CE Class B, C-Tick Class B, VCCI Class B, cUL, CB, IEEE 802.3 10Base-T, IEEE 802.3ab 1000Base-T, ANSI/IEEE 802.3 NWay auto-negotiation, IEEE 802.3x Flow Control, IEEE 802.1p QoS, IEEE 802.3az.1.1"(H) x 6.3"(W) x 4"(D).Limited lifetime warranty.D-Link Eight-Port Gigabit Ethernet Switch - Upgrade to High-Speed Networking
EX2300 and EX2300-C Ethernet Switches deliver a compact, high-density, cost-effective solution for small network environments where space and power are at a premium. Featuring a small, 1U footprint, the EX2300 and EX2300-C are ideal for access-layer deployments in micro branches, retail and workgroup environments, and converged network access in larger networks. The EX2300 offers 24 10/100/1000BASE-T ports in a single platform, while the EX2300-C offers 12 10/100/1000BASE-T ports. Both models are available with or without IEEE 802.3af Power over Ethernet (PoE) or 802.3at PoE+ for powering attached network devices. Optional front panel 10GbE uplink ports support connections to higher-layer devices. Both models support Juniper's unique Virtual Chassis technology, enabling up to four of the switches to be interconnected and managed as a single device. Both models can also act as satellite devices in a Juniper Junos Fusion Enterprise deployment, which combines large numbers of access switches into a logical management platform..Features 48 networking ports to meet the requirements of the most demanding workgroups.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.Optimize the performance of business networks with 10 Gigabit Ethernet connectivity.Useful for the multi-tenant unit and multi-business unit with Layer 4 traffic classifiers and bandwidth limit.Managed switch provides a reliable foundation for your network.Built-in power supply to ensure all components are being supplied with accurate voltage
NETGEAR introduces the XS508M, the first 8-port 10-Gigabit/Multi-Gigabit Ethernet Switch with 1 SFP+ port for Home and Business with 1G/2.5G/5G/10G per port flexible connectivity. Each of the 4 Ethernet ports automatically detects which speed is needed by the connected device and provides the adequate connection speed. Modern, high-performance network devices such as 5G network cards, gamer PCs, desktop PCs, servers, NAS storage or AC Wave 2 Wireless Access Points now come with 2.5-Gigabit or 5-Gigabit connectivity. In order to benefit from the full potential of these high-speed devices, performance and coverage, the NETGEAR XS508M Multi-speed capabilities are THE solution for plug-and-play flexible connectivity for your modern business or home..Unmanaged switch provides eight ports with multi-gigabit connectivity to your devices.Expand your network instantly, and provide your devices with either 100Mbps, 1G, 2.5G, 5G, or 10G data transfer rate automatically.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Meets or exceeds the CE: CB 60950-1, LVD 60950-1, AUS/NZ: AS/NZS 60950-1, USA: UL 60950-1, SNE VA and Taiwan: BSMI (CNS 14336-1) standards.One SFP+ fiber port offers 1G/10G connectivity or high-speed uplink connectivity to your core network.Switch is whisper-quiet due to an active fan.Simple setup with no software or configuration needed.Durable metal case and long product life (shown by MTBF numbers).Certifications and standards: CB mark, UL/cUL Listed, IEC, AS/NZS, Russia EAC mark.Lifetime manufacturer limited warranty.Plug-and-play Switches for Businesses in Need of Instant Connectivity.
SS2GR4000 Series is a L2 Gigabits intelligent switch designed for carrier and MAN networks. It supports comprehensive QoS, enhanced VLAN functions (VLAN VPN, Voice VLAN, QinQ, N:1 VLAN Translation), Ethernet Ring Protection Protocol (G.8032), classified bandwidth control, intelligent security control, OAM(Operations, Administration and Maintenance), manageability functions and Triple-Play services which fulfill the network requirements demanded by carrier network, MAN access. SS2GR4000 Series switch offers green features like IEEE 802.3az (Energy Efficient Ethernet), Fan-less design, which can dramatically lower power consumption, achieve green energy and save the cost for the carrier and MAN users..Features 48 networking ports to meet the requirements of the most demanding workgroups.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network
NETGEAR Plus switches with PoE meet business networks growing needs by providing fundamental network features such as simplified VLANs, QoS set-up and IGMP Snooping that will help optimize the performance of business networks. Plus Switches are the perfect upgrade from the plug-and-play unmanaged switch, delivering essential networking features at a very affordable price. The Netgear MS108EUP supports 2.5 Gigabit speed connectivity and Power-Over-Ethernet (PoE) that can provide up to 60W/port. This switch can power devices such as VoIP phones, surveillance IP cameras, wireless access points and many other applications. Netgear Plus switch includes advance PoE control to help optimize the performance and troubleshooting of business networks. The new and improved business-friendly GUI allows easy management and simple configuration. With the growing deployment of applications and an all-in-one solution, providing management and power to these applications would be perfect..8 x multi-gigabit Ethernet ports provide up to 2.5Gbps of dedicated non-blocking bandwidth each.4 x Ultra60 PoE++ and 4 x PoE+ ports provide a total of 230W of power, so you can charge and connect your devices with a single wire.40Gbps (10/100/1000Mbps) line-rate fabric ensures congestion-free connectivity with your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Business-friendly and easy-to-use web browser-based management GUI.Energy-Efficient Ethernet (IEEE 802.3az) support for maximum power savings.Advanced PoE controls: manage PoE prioritization, scheduling, power limit per port, and more for simple control over all PoE-powered devices.Fanless design makes this switch perfect for noise-sensitive environments.Simple, yet useful network set-up on top of plug-and-play connectivity.VLAN support for traffic segmentation.Auto ādenial-of-serviceā (DoS) prevention.Energy-Efficient Ethernet (IEEE 802.3az) support for maximum power savings.Port mirroring for network monitoring.Loop prevention and broadcast storm controls.Lifetime 24/7 chat technical support.Lifetime manufacturer limited warranty
Ubiquiti UniFi Switch Pro 48 PoE is a fully managed Layer 3 switch with eight 802.3bt (PoE++) and 40 802.3at (PoE+) Gigabit Ethernet ports. Four 10G SFP+ uplinks offer link aggregation for higher capacity and increased availability. The UniFi Pro features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing, static routing, and DHCP server. The UniFi Pro is the perfect access layer switch for any UniFi solution ā it combines up to 600W of near-silent PoE power with UniFi SmartPower RPS power redundancy. UniFi Network Controller and UniFi Network mobile app allow admins to configure and monitor virtually all of the switch features in an intuitive graphical user interface from anywhere..Fully managed Layer 3 switch with eight 802.3bt (PoE++) and 40 802.3at (PoE+) Gigabit Ethernet ports.Contains eight Gigabit RJ45 802.3bt PoE++ ports, 40 Gigabit RJ45 802.3at PoE+ ports, four 10G SFP+ ports.UniFi Network Controller and UniFi Network mobile app allow admins to configure and monitor virtually all the switch features in an intuitive graphical user interface from anywhere.Dimensions: 1.72"H x 17.42"W x 15.73"D.Max. power consumption (excluding PoE output): 60W.Certifications and standards: Meets or exceeds CE, FCC, IC standards.In addition to Layer 2 switching protocols and features, offers Layer 3 capabilities, such as interāVLAN routing, static routing, and DHCP server functionality.Can be located in any workspace; its integrated fans have built-in PWM (power management) control, air ducts and covers, and temperature sensors for the best user experience.SFP+ ports enable high-capacity uplinks of up to 10Gbps, so you can directly connect to a high-performance storage server or deploy a long-distance uplink to another switch.1.3" touch screen displays status information for easy monitoring and quick troubleshooting.Comes in silver.2-year manufacturer limited warranty
The JuniperĀ® SRX300-SYS-JB line of service gateway for the branch provides excellent security and networking solution. This gateway with six ports support the changing needs of cloud-enabled enterprise networks. It has 4GB RAM and 8GB flash memory for imp.Line of Service gateway has 6 ports.Dimensions: 1.37"H x 12.63"W x 7.52"D.Comes in desktop form factor and provides wired connectivity.Provides (8) 1GbE onboard, (6) 1GbE Onboard RJ-45, (2) 1GbE MACsec & onboard SFP transceiver, RJ-45 & miniUSB, USB 3.0 connectivity.Has 4GB RAM and 8GB flash memory.Power supply: Internal AC, 0.254 A current consumption, 15.4 W consumption, 85 BTU/hr heat dissipation.Acoustic noise level: 0 dBA (fanless), airflow/cooling: Fanless, MTBF: 44.5 years.Provides Gigabit Ethernet, HDLC, MLFR, MLPPP and PPP data link protocols to support 1 Gbps of data transfer rate.Network transport protocol: DDNS, DHCP, DNS, IPSec, PPPoE, RSVP, Routing protocol: BGP, DVMRP, ECMP, IGMP, IS-IS, MPLS, MSDP, OSPF, OSPFv3, PIM-SSM.Features 256 bit AES, 256 bit SHA, DES, IKE, IKEv2, MD5, PKI, SHA-1, SSL and Triple DES encryption algorithm with CLI, HTTP, SNMP, SSH and Telnet.Performance: 256000 IPv4 routing table entries, 64000 concurrent sessions, 1000 security policies, 15000 MAC addresses.Performance: 64000 IPSec VPN tunnels, GRE tunnels, 16 security zones, 50 maximum number of users, virtual interfaces, 32 virtual routers.Features high performance, business continuity, end user experience, highly secure, threat protection, easy to manage and scale, minimize TCO.Temperature: 32 to 104 deg F (operating), 10 to 90% (humidity).Meets FCC class A, RoHS 2, NDPP, VPNEP, FWEP and IPSEP standards.Weight: 4.38 lbs.
The D-Link DGS-1100 series' web user interface gives administrators an easy way to manage Layer 2 features, such as VLANs, Spanning Tree Protocol (STP), and link aggregation (desktop models utilize Static Trunk). With powerful security features including IGMP snooping, Static MAC, and Storm Control, these smart-managed switches are a versatile solution for deployments that require easy-to-configure functionality without added complexities. D-Link's free Network Assistant (DNA) utility displays all your connected devices and makes first-time configuration a breeze. The free D-View 7 Network Management System comes with a license for 25 nodes and two probes and full access to the management tools. The desktop models in the series utilize a fanless design, for silent and energy-efficient operation..Eight-port gigabit smart managed switch is a powerful and flexible networking solution for small, medium, and enterprise businesses.Switching capacity: 16Gbps; packet forwarding rate: 11.9Mpps.Comes in a compact fanless desktop design for silent and energy-efficient operation.Features a complete web interface for comprehensive switch management.Free D-View 7 Network Management System comes with a license for 25 nodes, two probes, and full access to the management tools.Maximum power consumption: 4.94W.With powerful security features including IGMP snooping, Static MAC, and Storm Control, these smart managed switches are a versatile solution for deployments that require easy to configure functionality without added complexities.Features Loopback Detection and Cable Diagnostics to help network administrators find and solve network problems quickly and easily.Loopback Detection detects loops created by a specific port and automatically shuts it down.Cable Diagnostics feature is designed for network administrators to quickly examine the quality of the copper cables, recognize the cable type, and detect cable errors.Advanced D-Link Green technology allows to save power without sacrificing performance.Supports half/full-duplex operation (half at 10/100 Mbps, full at 1000 Mbps).IEEE 802.3az compliant and features Link Status detection.Lifetime manufacturer limited warranty