9-Pin Adapters

The 4XEM DB9 Adapter is a serial 9-pin gender changing adapter featuring 1 x 9-pin DB-9 male connection on one end and a 1 x 9-pin DB-9 female on the other to enable converting a 9-pin serial male connection to a 9-pin female connection. Thanks to the high-quality built of this DB9 serial adapter, it offers a long service life..Gender changer DB9 to DB9 adapter for converting a 9-pin male connection to a 9-pin female one.Can be coupled with two 9-pin cables featuring female serial ports for connecting devices.Premium-quality built for durability.Comes with a limited lifetime warranty.The 4XEM DB9 Serial 9-pin Male To Female Adapter enables coupling with two 9-pin cables featuring female serial ports to ensure a secure connection.

Brainboxes 2-Port 9-pin DB-9 male RS422 to serial adapter is an effective solution to extend your device connectivity and provides two RS422/485 serial ports to offer peak performance. Delivers uncompromising performance on your laptop/PC with 128 byte deep transmit and 384 byte receive FIFOS coupled with 1Mbit line drivers. Supports 32 bit and 64 bit operating systems that includes Windows XP/Server 2003/Vista/Server 2008/Windows 7/8. Comes with IP-30 rated enclosure for added durability and protection..Serial adapter that is compatible to connect with various devices.USB for quick data-transmission.Full duplex, half duplex autogating modes for transmission, reception.Compatible with Microsoft Windows 8/7/Server 2008/Vista/Server 2003/XP OS.Includes US-313 x USB 2 port RS422/485 1M baud, installation CD including manual, Microsoft signed drivers and utilities.Measures 1.1" x 4.1" x 4".Copper offers good conductivity.Lifetime limited warranty.Meets WEEE, RoHS certification and standards.Weighs 4.06 oz.Brainboxes 2-Port 9-pin DB-9 male RS422 to serial adapter enhances productivity by connecting your computer to serial comms enabled devices. Transfers at 480 Mbps data rate.

The Opengear 6" crossover serial adapter features one RJ-45 female connection on first end and one 9-pin DB-9 female connection on second end. This serial adapter has copper conductors for high conductivity and plastic housing for durability. It supports network device and modem..Crossover serial adapter allows for a variety of connection.Cable length: 6".Connections: One RJ-45 female on first end and one 9-pin DB-9 female on second end.Connectivity: Wired.Material: Copper conductor, plastic housing.Device supported: Network device, modem

StarTech PLATE9MLP 9-Pin Serial Male to 10-Pin Motherboard Header LP Slot Plate.Easy to use and install.Conveniently add an external DB9 serial port.9pin Serial Male to 10pin IDC Female.Conveniently add an external DB9 serial port.9pin Serial Male to 10pin IDC Female

StarTech® Motherboard Header Slot plate in gray color features one DB9 male connector and one IDC10 connector. Plate can be connected to preferred slot on back of PC and plug the adapter into the motherboard for easy installation..1.33 ft.1 x DB-9 Male Serial.1 x IDC.Gray.1 x DB9 serial expansion port and bracket.Lifetime limited warranty.StarTech® 15.98" Motherboard Header Slot plate in gray color is made up of high-quality copper to ensure durability and reliability.

The Plugable 2' serial adapter features one Type A male USB connector on first end and one DB-9 male serial connector on second end for enhanced connectivity. This adapter supports PDA, GPS, router, modem and printer. It works well with software such as HyperTerminal, TeraTerm, WinDBG, all open source serial software on Linux and more. The adapter comes with driver CD and quick installation guide..USB To RS-232 Serial - Connect legacy DB-9 serial communications devices to a modern computer with USB.Legacy Support - Add a 9-pin DB9 RS-232 serial port to any modern computer, replaces built-in or PCIe serial adapters, recommended for use with a serial cable or NULL modem cable.Compatibility Guarantee - Genuine Prolific PL-2303HXD Chipset for widest possible compatibility with Windows (11, 10, 8.x, 7, Vista, and XP), Mac, Linux, and other platforms.Flexible - Programmable baud rate from 75 bits per second to 128,000 bits per second. Plug-and-play creation of a COM port. Powered by USB; no external power needed.Warranty and Support - Questions only an expert can answer? When you contact our support team, you’re connecting with the engineers who design our devices. Every Plugable product is backed by our Seattle-based support team–even before purchase, and a 2-year limited parts and labor warranty after purchase.Device supported: PDA, GPS, router, modem, printer.Works with software like: HyperTerminal, TeraTerm, WinDBG, all open source serial software on Linux, etc.Drivers available for Windows 98, XP, 2K, Vista, Windows 7 and Windows 8 (all versions), Mac OS 8, 9 and Max OS X, Linux kernels 2.6.11 and later.Contains driver CD and quick installation guide

Iogear® USB 1.1 DB-9 Male to type A male RS-232 serial adapter is a efficient and cost effective solution for various communication and automation applications. Provides a RS-232 serial connector through a standard USB port for reliable transmission. High quality adapter accelerates the data transfer process by transferring at the rate of 230 Kbps. Offers candid USB interface to other serial peripherals like modem, PDA, POS or other serial devices and eliminates the need of the setup hassle. Supports energy saving suspend and remote wakeup operations..USB adapter that is compatible to connect with various devices.1' length for easy access.Male-to-male cable design eliminates the need for separate adapters.USB 1.1 for quick data-transmission.1 x 9 PindB-9 male RS-232 serial to connect conveniently with desktops or laptops.Plastic housing for durability.Compatible with Windows XP/Vista/7/8/8.1, Mac OS.Measures 0.6" x 1.3" x 16.6".Features 1 x 9-pin DB-9 male RS-232 serial connector at first end, 1 x 4-pin type A male USB connector at second end.Copper offers good conductivity.Converts older serial devices to USB connection.Power consumption is about 90 mA and supports the RS-232 serial interface.Offers transfer rate Up to 230 Kbps with USB 1.1, 2.0 compatibility.Operates temperature range of 41 - 104 deg F.Meets RoHS, WEEE certification and standards.Weighs 0.10 lbs.Comes with 3 years limited warranty.Iogear® USB adapter enhances productivity by instantly connecting your PC or Mac with serial devices. Transfers the data at the rate up to 230 Kbps.

Brainboxes Ethernet to serial adapter transfers data at a rate of 1,000,000 baud rates and provides simple instant networked serial ports. Ethernet device can be accessed via TCP/IP sockets from any networked device..8 x RJ-45.2.2"(H) x 8 1/2"(W) x 4.8"(D).Wired.Connectivity media: Twisted pair 10/100base-TX fast Ethernet, Max baud rate: 1 Megabaud.Maximum power consumption: 1.93 W, Data bits: 5, 6, 7 or 8, Parity: Odd, even, none, mark or space, Stop bits: 1, 1.Form factor: Rail-mountable, wall mountable.Operating distance: EIA - RS232 standard.Connector: DB9 connector - 9 pin male, Management and protocols: RS232.Package includes: ES-279 Ethernet to serial device server, global power supply - PW-800, quick start guide, installation CD (manual, Microsoft signed drivers and utilities).Certifications & Standards: IEEE 802.3, IEEE 802.3u, CE, RoHS, WEEE.Weight: 0.87 kg.Black.Brainboxes Ethernet to serial adapter provides access to 8 RS232 serial ports and is featured with web interface for secure configuration of serial port over internet.

This adapter lets you connect up to four RS 232 serial devices to your Mac or PC laptop or desktop computer through a single USB port, as though the computer offered built-on DB9M serial connectors..Photo printer offers fast, reliable printing.Print technology: 4-color (CMYBK) drop-on demand MicroPiezo ®, Print resolution: 5760 x 1440 dpi.Connectivity: Hi-speed USB 20/Wireless 80211 b/g/n5, Wi-Fi direct.Dimensions: 33"H x 9"W x 69"D (storage), 79"H x 98"W x 151"D (printing).Paper type: Plain paper, photo paper glossy, premium photo paper glossy, ultra premium photo paper glossy, Paper sizes: 35" x 5", 4" x 6", 5" x 7".Meets UL60950, CSA 222 No 00950 EMI FCC part 15 subpart B class B, CSA C1088 class B certifications and standards.Display: 27" Color LCD display.Supported memory cards: SD/SDHC/SDXC, miniSD, miniSDHC, microSD, microSDHC, microSDXC.Mobile device compatibility: Epson Connect ™, Epson email print, Epson iPrint ™ mobile app, AirPrint ™, Google Cloud Print ™ android printing.Replacement ink: 320 standard-capacity (CMYBK), Printer designed for use with Epson cartridges only, Ink yield information: CMYBK - 100 4" x 6" photos.Ink type: 4-color dye, Ink palette: Dye black, cyan, magenta and yellow, Fade resistance/print longevity: Up to 200 year album storage.Rated voltage: 100 - 240 VAC, Rated frequency: 50/60 Hz, Rated current: 04 A (max 05 A).Operating temperature: 50 - 95 deg F.Contains setup and instruction manual, power cord, AC power adapter, one ink cartridge (CMYBK) and five photo paper glossy sheets.Comes with 1 year limited warranty.Safety Data Sheet.Certification and standards: Green compliant, CE, ROHS, FCC, USB 1.1 specifications.Warranty: Lifetime limited.Startech.Com® ICUSB2324 DB9 4 Port Serial Adapter Hub is compactly designed to preserve valuable workspace, and is bus-powered to eliminate the need for an external power adapter.

The StarTech.com ® PLATE9M16LP 1-port 16" DB9 serial port bracket to 10-pin header data transfer cable allows DB9 serial connectivity on a compact POS computer. It adds a DB9 serial port to the rear panel of a small form factor/low profile computer, connecting to an IDC10 header connector on the motherboard. This cable features high-quality components for longer life. It has one 10-pin IDC female connector on one end and 9-pin DB-9 male connector on other end to ensure reliable connection..Connectors: one IDC (10-pin, motherboard header) female on first end and one DB-9 (9 pin, D-Sub) male on second end.RoHS Compliant.Weight: 0.8 oz..Comes with lifetime warranty.Certifications and standards: RoHS, green compliant.Length: 1.33'.Dimensions: 3.1"(H) x 0.7"(W) x 6.2"(L).Applications: Enabling DB9 serial connectivity on a compact POS computer.low profile serial plate adds a DB9 serial port to the rear panel of a small form factor/low profile computer.Constructed of high quality components.28 AWG wire gauge, 16" cable length, copper conductor.Includes: 1 x 16" / 0.4 m low profile port serial plate.StarTech.com DB9 Serial Port Bracket - Low-Profile Serial Port

StarTech DB9 RS232 Serial Null Modem Adapter, F/F (NM9FF).Easy to use and install.Backed by StarTech .com lifetime warranty.DB-9 Female to DB-9 Female

StarTech DB9 RS232 Serial Null Modem Adapter, F/F (NM9FF).Easy to use and install.Backed by StarTech .com lifetime warranty.DB-9 Female to DB-9 Female

Replace or add a serial port to your compatible HP computer. Compatible with the following: HP EliteDesk 800 G6 TWR, HP EliteDesk 800 G6 SFF, HP EliteDesk 800 G6 DM, HP EliteDesk 805 G6 SFF, HP EliteDesk 805 G6 DM , HP ProDesk 600 G6 MT, HP ProDesk 600 G6 SFF, HP ProDesk 600 G6 DM, HP ProDesk 400/480 G7 MT, HP ProDesk 400 G6 DM, HP ProDesk 400 G7 SFF, HP ProDesk 405 G6 MT, HP ProDesk 405 G6 SFF, HP ProDesk 405 G6 DM..9-Pin Serial Male Connector.Compatible with a variety of HP PCs.Weight: 0.46 oz.Dimensions: 4.18 W x 3.9 D x 1.65 H (cm)

Startech.com® 8 Port adapter features metal construction that adds durability in harsh environments. Adapter has sturdy wall-mounting brackets and top-hat DIN rail clips..Connect up to 8 USB devices.Windows 8 (32/63bit), 7 (32/64), Vista(32/64), XP(32/64), 2000, CE, Windows server 2008 R2, 2003(32/64), 2000, Mac OS 10.x, Linux 2.4.x/ 2.6.x.Integrated wallmount brackets and included DIN Rail clips for versatile mounting options.Black.Form factor: Wall mountable.Interfaces: 1 x 4-pin female USB 2.0 (external), 8 x 9-pin DB-9 male RS-232 serial (external).Dimensions: 1.7inch(H) x 3.9inch(D) x 7.1inch(L).Includes 1 x USB to RS-232 serial adapter, 1 x DIN rail kit, 1 x 6 ft USB A to B cable, 1 x driver CD, 1 x instruction manual.Rugged all-metal enclosure for added durability in harsh environments.Easy plug and play installation, with our USB Powered adapter - no power outlet required.Max baud rate: 921.6 Kbps, serial protocol - RS-232, data bits - 7, 8, FIFO - 4096 byte transmit and receive.LED indicators: 8 each, Tx/Rx activity indicators, enclosure type - steel.Parity odd, even, mark, space, none and stop bits - 1, 2.Applications: Perfect for IT Administrators looking to add legacy functionality to newer notebooks, PCs and servers that lack an integrated RS232 port, connect, monitor and control industrial/automotive sensors and equipment.Connect bar code scanners, receipt printers and other point of sale devices, Connect a satellite receiver, serial modem, or PDA with serial sync, connect and program LED and Digital signage boards.Operating temperature: 32 - 131 deg F, storage temperature: 0 - 85.Certifications and standards: RoHS, green compliant, CE, FCC.Weight: 19.2 oz..Warranty: 2 years limited.Startech.com® 8 Port adapter converts a single USB port into eight RS232 serial ports and also enables in connecting to monitor and control serial devices.

Includes one USB to RS-232 serial adapter, one DIN rail kit, one 6 ft USB A to B cable, one driver CD, and one instruction manual..USB.Data transfer rate: 921.60 Kbps serial port.Ports: 1 x 4-pin type-B female USB 2.0 USB external, 4 x 9-pin DB-9 male RS-232 serial external.Dimensions: 1"(H) x 2.6"(W) x 5.9(L).Form factor: Wall mountable.Serial protocol: RS-232, FIFO: 256 bytes.Chipset ID: FTDI FT2232H.Max baud rate: 921.6 Kbps, Parity: odd, even, mark, space, none, Stop bits: 1, 2, Data bits: 7, 8.Bus type: USB 2.0, Port style: External hub.Environmental condition: Operating temperature: 0 to 60 deg C, Humidity: 5 - 95% RH.Platform supported: PC, Mac.Operating system: Windows 8/7/Vista/XP/2000/CE/Server 2008 R2/2003/2000, Mac OS 10.x, Linux 2.4.x/2.6.x.Certifications and standards: RoHS, Green Compliant.Weight: 15.9 oz..Warranty: 2 years limited.Warranty: 2 years limited.Startech.com® Serial adapter hub has a data transfer rate of 921.60 Kbps and is PC and Mac platform supported.

This PCI Express RS232 serial adapter card lets you add four RS232 (DB9) serial ports to your computer through a PCI Express (PCIe) slot, as if they were native serial ports. The 4 port PCIe serial card enables you to interact with serial devices, such as card readers, printers, PIN pads, and modems, at speeds of up to 921.6Kbps..4 PORT SERIAL CARD: Serial controller card w/ 16950 UART based on ASIX AX99100, allows 4x DB9 ports w/bi-directional RS232 speeds up to 921.6Kbps per port, available 256 byte FIFO buffer; Upgraded version of our popular Serial card PEX4S952.OPTIONAL CONFIGURABLE POWER: PCIe multiport serial card provides 12v, 5v, or none through pin 9 w/up to 2A total; Each of the 4 ports are individually configurable; DB44 to 4x DB9 breakout cable incl.STANDARD PROFILE & LOW PROFILE BRACKET: PCI Express RS232 serial adapter card has standard bracket pre-installed & 1x low profile bracket incl for versatile install; Supports Windows XP and up & Linux.VERSATILE APPLICATIONS: For standard profile desktop/servers with uses in point of sale terminals, PLCs, control/automation in factories, scientific sensors, medical equipment, scanners, oscilloscope.STARTECH.COM ADVANTAGE: IT professionals choice for over 30 years; PCI-e RS232 Serial expansion card is backed for life by StarTech.com, incl. free 24/5 North America based multi-lingual tech support

This RS232 Serial Adapter Card lets you add an RS232 DB9 serial port to your computer through a PCI Express (PCIe) slot. It enables you to interact with serial devices such as card readers, printers, PIN pads, and modems, at speeds of up-to 921.4Kbps. With broad OS support, including for Windows and Linux, this PCI Express card is easy to integrate into mixed environments. The card comes pre-configured with a low-profile bracket, and includes an optional full-profile bracket, so installation is easy regardless of the case form factor..One-port RS232 serial adapter card with 16950 UART.Dimensions: 3.9"H x 2.6"W x 5.9"D.Features one PCI Express x1 male, one DB-9 (9-pin, D-sub) male, and one LP4 (4-pin; large drive power) male input.Meets or exceeds RoHS and REACH standards.Offers to add RS232 DB9 capabilities without purchasing a new server or computer.Maximizes case form factor integration with a low-profile or full-profile bracket.High-speed data transfer rates up to 921.4KB/s.Supports 256-byte depth FIFO per transmitter and receiver.Weight: 1.6 oz..Card type: low profile.Chipset ID: ASIX AX99100.Interface: serial.Compatible with Windows 7, 8, 8.1, 10; Windows Server 2003, 2008 R2, 2012, 2012 R2, 2016; Linux 2.4.x to 2.6.x LTS versions only.Lifetime manufacturer limited warranty

Brainboxes 1 Port USB to serial adapter has type A male USB connector on first end and 9-pin DB-9 male RS-232 serial connector on second end. Adapter includes installation CD, 0.25 m USB extender cable and weighs 0.80 oz..USB 2.0.Data transfer rate: Up to 921600 baud, USB 2.0: 480 Mbps.Ports: 1 x 9-pin DB-9 male RS-232 serial, 1 x type-A male USB.Dimensions: 3.5" x 1.4" x 0.8".Form factor: External.Power consumption: 40mA at 5V.Serial port: Ports: 1, Protocol: RS232, Connector: DB9 connector - 9 pin male.Operating distance: EIA - RS232 standard, Tx FIFO size: 128, Rx FIFO size: 256.Max baud rate: 921600, Data bits: 7 or 8, Parity: odd, even, none, mark or space, Stop bits: 1 or 2.Tx/Rx modes: Point to point.PCB layers: 4.Platform supported: PC.Operating system: Microsoft Windows 7/Server 2008/Vista/Server 2003/XP/2000.Includes USB to serial adapter, installation CD, 0.25m USB extender cable.Certifications and standards: RoHS, WEEE.Weight: 0.81 oz..Warranty: Lifetime limited.Black/Blue.Brainboxes 1 Port USB to serial adapter supports 921,600 bytes data transfer rate to provide high performance and drivers for all popular operating systems.

Brainboxes USB to serial adapter features drivers for all popular operating systems including Windows 8. Adapter has external form factor and is PC platform supported with 2 x 9-pin DB-9 male RS-232 serial ports..USB 2.0.Data transfer rate: Up to 921600 baud, USB 2.0: 480 Mbps.Ports: 2 x 9-pin DB-9 male RS-232 serial.Dimensions: 4" x 4.1" x 1.1".Form factor: External.Power consumption: 100mA at 3.3V.Serial port: Ports: 2, Protocol: RS232, Connector: DB9 connector - 9 pin male, Tx FIFO size: 128, Rx FIFO size: 384.Operating distance: EIA - RS232 standard, Tx FIFO size: 128, Rx FIFO size: 384.Max baud rate: 921600, Data bits: 7 or 8, Parity: odd, even, none, mark or space, Stop bits: 1 or 2, Flow control: RTS/CTS, DSR/DTR, Xon/Xoff.Tx/Rx modes: Point to point.PCB layers: 4.Platform supported: PC.Operating system: Microsoft Windows 7/Server 2008/Vista/Server 2003/XP/2000.Certifications and standards: RoHS, WEEE.Weight: 3.84 oz..Warranty: Lifetime limited.Black.Brainboxes USB to serial adapter has data transfer rates up to 921.60 Kbps and features high retention USB socket.

StarTech Slimline Serial DB9 gender changer.Gender changer transforms a nine-pin female port to a nine-pin male port.DB-9 nine-pin and D-sub male connector on both ends.Simple to use and install.Meets RoHS, FCC and CE Compliance.Lifetime warranty.The StarTech Slimline Serial DB9 gender changer is a reliable way to convert a nine-pin female port to a nine-pin male port.

Engineered for reliability and performance, the ASCSDB9F adapter bridges legacy serial devices with modern console servers using a compact, rugged design. Whether you're managing data centers, networking gear, or industrial systems, this adapter ensures seamless communication between RJ-45 Female and DB9 Female interfaces..Engineered for serial data communication and widely deployed across IT infrastructure, data centers, and industrial environments..Features an RJ-45 female connector and is compatible with the Raritan ConsoleSwitch SCS232 for reliable serial communication..Includes a DB9 female connector that delivers RS-232 serial output to compatible legacy devices..Equipped with female connectors on both the RJ-45 and DB9 ends, allowing seamless connectivity..Designed exclusively for data transmission.

Startech® Slimline GC9SF DB9 Serial Gender Changer.Adapter type: Serial.Warranty: Lifetime limited.Gold-plated contacts for lag-free and efficient data transmission.Supports a display resolution of 1080p for outstanding video clarity.Compact and lightweight design for hassle-free portability.RoHS compliant.StarTech .com® Slimline serial gender changer is a reliable way to convert a 9 pin male port to a 9 pin female port and is easy to use or install.

The Ethernet to Serial Adapter supports data transfer rates of up to 10/100 Mbps..Interface Ethernet.Ports 1 x RJ-45 network port, 2 x serial port.Number of ports 2.Operating systems Windows® 7 (32- 64-bit), Vista (32- 64-bit), XP (32- 64-bit), Server 2003 & 2008 (32- 64-bit), Server 2008.Ethernet technology Fast Ethernet.Network standard 10 100Base-TX.Connector type 9 pin male (DB-9).Operating Temperature 0 to 55 deg C.Dimensions 1.10"(H) x 49"(W) x 42"(L).4 PCB layers.Power consumption 0.92W typical.Flow control RTS CTS, DSR DTR, Xon Xoff.Data bits 5,6,7 or 8, Stop bits 1, 2.Package contents ES-257 ethernet to serial device server, installation CD including manual, microsoft signed drivers & utilities, power supply.Weight 0.515 kg.Certification and standards Green compliant, FCC, WEEE, RoHs.Warranty Lifetime limited.Warranty Lifetime limited.Brainboxes ES-257 2 Port Ethernet to Serial Adapter card provides a simple, instant cable replacement providing network integration.

Startech.com® Firewire card adapter adds 3 ports to a standard or small form factor computer with support for high-powered devices. Adapter features a native single chip for faster, more reliable and cost effective performance..PCI-express.Data transfer rate: 800 MBps.Ports: Internal: 1 x SP4 (4 pin, small drive power) male, external: 1 x Firewire 400 (6 pin, IEEE 1394a) female, 2 x Firewire 800 (9 pin, IEEE 1394b) female.Dimensions: 4.7"(H) x 0.7"(W) x 3.5"(L).Form factor: Plug-in card.Chipset ID: LSI/Agere - FW643.Bus type: PCI-express, card type: Low profile.Utilizes a native PCI Express chipset design rather than a bridge chip, ensuring a fast, reliable and cost-effective FireWire expansion.Total number of FireWire/i.LINK ports: 3, Number of FireWire/i.LINK 400 ports: 1, Number of FireWire/i.LINK 800 ports: 2.Add 3 FireWire ports to a standard or small form-factor (SFF) computer with support for high-powered FireWire devices.Environmental condition: Operating temperature: 0 to 50 deg C, Humidity: 0 - 90% RH.Platform supported: PC, Mac.Operating system: Windows 98SE/ME/2000/XP/Server 2003/Server 2008 R2/Vista/7/8, Mac OS X, Linux.Includes 1 x PCI-express FireWire card, 1 x FireWire cable, 1 x low profile bracket, 1 x software CD, 1 x instruction manual.Certifications and standards: RoHS, Green Compliant.Weight: 1.8 oz..Warranty: Lifetime limited.Startech.com® Firewire card adapter can be installed in a PCI express slot to add two IEEE1394b ports and supports maximum data transfer rate of 800 Mbps.

Connect devices with a 9-pin RS-232 serial port, such as PDUs, network switches and console servers, to the USB-A port on your computer or laptop. This USB-to-Serial cable (M/M) connects a 9-pin RS-232 (DB9) serial device to a USB-A port on your desktop computer or laptop. It connects modems, PDUs, network switches, console servers and other serial devices at data transfer speeds up to 230 Kbps, which is twice as fast as a built-in serial port. The compact five-foot (1.5-meter) cable fits easily inside a backpack or laptop bag for use almost anywhere. The U209-000-R blocks disruptive EMI (electromagnetic interference) and RFI (radio frequency interference) line noise that can disturb your network equipment and inflict hardware damage or data loss. Premium double-shielding eliminates crosstalk and helps your connected components perform better and last longer. This RS-232 cable requires no external power source and supports remote wake-up and power management. It works with most major operating systems, including Windows 2000 through 11, macOS 10.6 through 12.4 and Linux Redhat 7.3, 8.0 and 9.0.Supports data transfer rates up to 250 Kbps—2x the speed of a built-in serial port.Premium double-shielded cable eliminates crosstalk and reduces EMI/RFI line noise.Portable design fits comfortably inside a backpack or laptop bag.Compatible with Windows, macOS and Linux operating systems.Plug-and-play with no external power required for easy, immediate installation.3-year limited warranty.TripLIte 5 ft. (1.5 m) USB-A to RS-232 (DB9) Serial Adapter Cable (M/M)

Digi® USB-to-Serial adapter has 1 x 4-pin type B female USB 2.0 connector on first end and 1 x 9-pin DB-9 male RS-232 serial connector on second end. Adapter is compatible with PDA, printer, scanner or other peripheral devices..USB/serial interface.Data transfer rate: Up to 230 Kbps.Ports: 1 x RS-232 9-pin D-sub (DB-9).Dimensions: 0.8"(H) x 1.8"(W) x 3.2"(D).Connectivity technology: Wired.Connector: 1 x 4-pin type B female USB 2.0 USB first end, 1 x 9-pin DB-9 male RS-232 serial second end.Plug and play, hot swappable.USB 1.0, 1.1 and 2.0 compliant, no external power supply needed, UART: 128 byte buffer per direction.Compatibility: PDA, printer, barcode, scanner and other serial peripheral device.Plug the Edgeport/1 into the USB-port of a desktop PC, laptop, or thin client and gain one high speed RS-232 DB-9 serial-port.Operating temperature: 32 - 149 deg F, Operating humidity: 0 - 95%.Includes Edgeport/1, 1 meter USB cable.Compliant and standards: CE, UL 1950, CSA No. 950, FCC Part 15 Class B, EN55022 Class B, 55024, 60950.Weight: 1.6 oz..Warranty: 5 years limited.Digi® USB-to-Serial adapter is perfect for mission-critical applications like mobile computing and supports high-speed RS-232 DB-9 serial port.

The HP® N2Z63AA 0.46' USB adapter in black, has one 9-pin USB 3.0 Type A female connector on first end and one USB 3.0 Type C male connector on second end for ensuring enhanced connectivity. It is perfect for use with HP Chromebook 13 G1 and HP Elite x2 1011 G1 tablet..USB adapter delivers blazing fast speed to laptop or desktop computer.Cable length: 0.46'.Connections: One 9-pin USB 3.0 Type A female on first end, one USB 3.0 Type C male on second end.Compatibility: HP Chromebook 13 G1, HP Elite x2 1011 G1 Tablet.Color: Black.Convert Notebook or tablet’s USB-C™ port to USB 3.0 with the HP USB-C™ to USB 3.0 adapter.Use the adapter to connect to your frequently-used USB 3.0 devices through your Notebook or tablet’s USB-C™ port.Meets BSMI, C-Tick, cUL, FCC, IC, UL, VCCI certifications and standards.Comes with 1 year limited parts replacement warranty

This StarTech USB-C multiport adapter with DP 1.4 compatibility turns your iPad Pro, Surface Pro 7, Google Pixelbook and other USB-C tablets and laptops into a workstation, anywhere you go. The USB Type-C multiport adapter provides 4K 60Hz HDMI (HDR10) video output, a USB Type-C port (data/power), two USB 3.2 Gen 1 Type-A (5Gbps) ports, and a TRRS 4-channel audio port for headset and mic, all through a single connection to your laptop's USB-C or Thunderbolt 3™ port. It offers advanced charging through USB 100W Power Delivery 3.0 and eliminates the need for an attached cable with a direct/flush USB-C connection..This multiport adapter with DP 1.4 compatibility turns your iPad Pro, Surface Pro 7, Google Pixelbook, and other USB Type-C tablets and laptops into a workstation, anywhere you go.Dimensions: 0.3"H x 3.5"W x 1.3"D.Contains USB Type-A (9 pin, 5 Gbps), 1 - USB 3.2 Type-A (9 pin, Fast-Charge), HDMI, USB 3.2 Type-C (24 pin, Gen 1, 5Gbps), 3.5 mm Audio, USB 3.2 Type-C (24 pin, Gen 1, 5Gbps).Features a built-in center-positioned USB Type-C connector for a flush cableless connection.Supports up to 4K 60Hz HDMI 2.0 (HDR) video, 2-Port USB-A Hub (1x BC1.2 fast charge), TRRS audio for headset/mic, and 1x USB-C (Data + Power Delivery 3.0).Powered via USB bus or external USB Type-C power adapter; 100W Power Delivery 3.0 pass-through with 8W reserved for the adapter to avoid video flickering, device dropouts, or overdrawing power common in other hubs; up to 92W for laptop charging.Portable docking station design allows for easy transport, either separately in a laptop bag or left connected to the laptop, for convenient on-the-go use, business travel, or work from home.With automatic driver installation for easy installation, this universal USB Type-C multiport adapter supports all major operating systems such as Windows, macOS, iPadOS, Chrome OS.Compatible with macOS10.13/10.14/10.15/11.0/12.0/13.0, Windows 8.1/8/ 11/10, Chrome OS, iPadOS, Android.Meets or exceeds FCC, CE, RoHS standards.3-year manufacturer limited warranty

Add RS-232 DCE serial communication support to your desktop or laptop with this 3.3ft (1m) USB to RS-232 Null Modem Serial Adapter, featuring a DB9 female connector and FTDI chipset for reliable performance. Designed to resolve DCE/DTE conflicts without extra cross-wired cables or adapters, this rugged adapter offers real-time LED indicators for transmit, receive, and USB status, ensuring easy diagnostics. Compatible with Windows (7+), macOS (10.15+), ChromeOS, and Linux, it supports automatic driver installation and COM port retention for seamless reconnection. Built for durability with molded TPE housing, Level-4 ESD protection (15kV air / 8kV contact), copper shielding to minimize EMI/RFI interference, and gold-plated connectors for superior signal integrity, this adapter is ideal for connecting industrial sensors, POS devices, barcode scanners, and digital signage boards. With a max baud rate of 921.6Kbps, extended operating temperature range (-40°C to 80°C), and interchangeable DB9 screws/nuts for secure mounting, this USB to serial adapter delivers reliable, high-speed connectivity for all your RS-232 applications..Add RS-232 Serial Support: Easily connect legacy serial devices to your laptop or desktop via USB-A; resolves DCE/DTE conflicts without extra cross-wired cables or adapters..Null Modem Design: Includes a DB9 female connector with interchangeable screws and nuts for secure attachment to industrial equipment, POS devices, and signage boards..Real-Time LED Indicators: Monitor Transmit (TX), Receive (RX), and USB status for quick diagnostics and troubleshooting..Universal Compatibility: Works with Windows (7+), macOS (10.15+), ChromeOS, and Linux; features auto-driver installation and COM port retention for seamless reconnection..Rugged & Reliable Build: Molded TPE housing, Level-4 ESD protection (15kV air / 8kV contact), copper shielding to reduce EMI/RFI interference, and gold-plated connectors for superior signal integrity..High-Performance Specs: 3.3ft (1m) cable, FTDI FT232R chipset, max baud rate 921.6Kbps, extended operating temperature (-40°C to 80°C), and support for multiple parity/data bit configurations..Box contains: USB to serial adapter, two DB9 nuts, quick-start guide.2-year manufacturer limited warranty

Plug in this USB adapter to connect iOS devices, cameras, flash drives, and many other digital accessories to a MacBook or MacBook Pro. High-speed transfers make it easy to sync, charge or transfer data between devices with this Apple USB adapter..USB A Female/C Male in white lets you connect iOS devices and many of your standard USB accessories to a USB-C enabled Mac.Cable length: 0.5'.Plug the USB adapter into your MacBook and then connect your flash drive, camera, or other standard USB device.Has one 24-pin type C USB male connector on first end and one 9-pin type A USB female connector on second end.Compatible with the following models: 12" MacBook, 13" MacBook Pro, 15" MacBook Pro, 21.5" iMac, 27" iMac, iMac Pro, iPad Pro 11", iPad Pro 12.9" (3rd generation).You can also connect a Lightning to USB cable to sync and charge your iPhone, iPad, or iPod.Data transfer rate: 5Gbps.Make connecting standard USB devices to a MacBook or MacBook Pro simple with this Apple USB-C to USB adapter.

The Eaton RELAY-MS mini slot remote power management adapter features one 9-pin D-Sub RS-232 serial port for connectivity and is compatible with Eaton 5130, 9130, 9135 and 9170 UPS..Mini-slot relay card provides automatic shutdown features for convenient performance.1 x RS-232 serial for easy connectivity.Mini-slot for added convenience.Compatible with 5130/9135/9130/9170 Eaton UPSs.Provides automatic shutdown and network monitoring.Eaton Mini-slot relay card offers automatic shutdown features and a variety of industrial applications. All Eaton UPSs that have a minislot are compatible with this card.

Startech.com® Port PCI express superspeed USB 3.0 card adapter comes with an optional LP4 power connector to connect to your system power supply. Adapter expands the USB capabilities of your system with two extra external ports..1 x PCI express interface.Data transfer rate: 5Gbps.Ports: 2 x USB 3.0 (9-pin) female external-port, 1 x LP4 (4-pin) male internal-port.Form factor: Plug-in card.Connectivity technology: Wired.Dimension: 4.7"(H) x 0.7"(W) x 3.2"(L).Maximum cable length: 9.8'.Operating system: Windows 8/7/Vista/XP (32/64bit), Windows® Server 2012, 2008 R2, 2003 (32/64), Linux Kernel 2.6.31 or later.Platform supported: PC.Optional LP4 power connector provides up-to 900mA per USB port.Connect additional external hard drives, CD/DVD drives, MP3 players, printers, scanners, webcams, game controllers, digital cameras, etc. to a computer system.Fits into full or low-profile/small form factor (SFF) systems, with a dual-profile design.Improved performance with UASP support.Includes PCIe USB 3.0 card, low-profile bracket, driver CD, instruction manual.Certifications and standards: CE, FCC, RoHS.Weight: 1.8 oz..Warranty: 2 years limited.Startech.com® Port PCI express superspeed USB 3.0 card adapter has data transfer speeds of up to 5Gb/s and delivers powers of up to 900 mA to USB 3.0 bus-powered devices.

Brainboxes 1 Port RS422/485 ethernet to serial rail-mount device server is compatible with Windows 2000/XP/Vista/7/8 OS. Server allows accessing the device via TCP/IP sockets from any networked device like an Android tablet, PC or phone..Media type supported: Twisted-pair.Max baud rate: 1,000,000 (1 MegaBaud), data bits: 5,6,7 or 8, parity: Odd, even, none, mark or space, stop bits: 1 or 2, flow control: RTS/CTS, XON/XOFF, Tx/Rx modes: Point to point, data transfer rate: 230.4 Kbps.OS required: Microsoft Windows 7 32 bit & 64 bit editions, Windows Server 2008 32 bit & 64 bit editions, Windows Vista 32 bit & 64 bit editions, Windows Server 2003 32 bit & 64 bit editions, Windows XP 32 bit & 64 bit Editions, Microsoft Windows 2000.Protocol: RS422/485, connector: DB9 connector - 9 pin male, Tx FIFO size: 4096, Rx FIFO size: 2048, operating distance: RS422/485 standard (4000 ft : 1200 meters).Ethernet technology: Fast Ethernet, network standard: 10/100Base-TX.Network/Transport protocol: TCP/IP, UDP/IP, ICMP/IP, BOOTP, DHCP, remote management protocol: Telnet, HTTP, status indicators: Port status, link activity, link OK.Interfaces: 1 x 100Base-TX - RJ-45.Form factor: Rail-mountable.Storage temperature: 0 to +55 deg C / +32 to +158 deg F.Power input: 5 - 30 VDC input, reverse polarity protected, power supply: 1 description Global power supply - PW-800, power consumption: 0.77W (Typical).Web interface allows secure configuration and control of the serial ports over a local network or the internet using any browser.Includes: 1 port RS422/485 Ethernet to serial adapter ES-320, installation CD including manual, Microsoft signed drivers & utilities, global power supply.Half-duplex configuration with autogating provides trouble-free data transmission due to automatic control of data direction.Certifications and standards: EMC: CE TAA, AEO C-TPAT, IEEE standards: 802.3, 802.3u, green compliance certificate/authority: RoHS, WEEE.Dimensions: 1.1"(H) x 4"(W) x 3.9"(D).Warranty: Lifetime limited.Brainboxes 1 Port RS422/485 ethernet to serial rail-mount device server offers data transfer rates up to 1000000 baud and has simple instant-networked serial ports.

Quickly and easily add a serial port to your desktop to connect to your serial and parallel peripherals with the HP USB Serial Port Adapter, which plugs into any USB port on your PC..Transfer data in a snap.Serial and USB ports for instant connectivity.1 x 9-pin DB-9 Female RS-232 Serial establishes rapid connection with a PC

The Brainboxes ES-446 1-port RS232 PoE Ethernet to serial device server with fast Ethernet technology is rail-mountable and features user-friendly interface that is simple to use and delivers powerful operation. It comes with serial port tunneling that allows serial cable replacement over any distance and supports data rate from 110 to 1000000 baud. It features point-to-point Tx/Rx modes and has DB9 9 pin male connector. This device server features EIA - RS232 standard operating distance and is compatible with Microsoft Windows 10/8/7/Server 2008/Vista/XP/2000 operating system..Drive server provides access to one RS232 serial port.Dimensions: 1.1"H x 4"W x 3.9"D, 96.3 mm x 101 mm x 25 mm (with ears), 91.6 mm x 77 mm x25 mm (without ears).Connectivity: 10/100Base-TX Fast Ethernet.Requires Microsoft Windows 10, 8 - 32 bit & 64 bit Editions, Windows Server 2012, 7 - 32 bit & 64 bit Editions and Windows Server 2008 32/64 bit.Power supply: PW-800 optional global power supply, power consumption: 1.5 W typical, Power input: Power over Ethernet OR 5 - 30V DC input.Meets CE, IP-30, TAA, Green compliance, RoHS and WEEE certifications & standards.Interface: One RS232 serial port, one Network (RJ-45) and PoE (RJ-45) port.Connector: DB9 connector - 9 pin male, Tx FIFO size: 256, Rx FIFO size: 32, Integrated connector.Operating distance: EIA - RS232 standard, Max baud rate: 1 MegaBaud, Data bits: 5 ,6 ,7 , 8, Parity: Odd, even, none, mark or space, Stop bits: 1 or 2.Power over Ethernet: IEEE 802.3af, PCB layers: 4, Mounting accessory: DIN-rail mounting kit - MK-048, Network protocols: ICMP, IP, TCP and UDP.Media type supported: Twisted pair, User friendly interface, simple to use, powerful in operation.Temperature: 0 - 60 deg C (operating), Humidity: 5 to 95 percent (non-condensing).Contains server, quick start guide, installation CD including manual, Microsoft signed drivers & utilities.Weight: 4.27 oz..Comes with lifetime warranty.Black

Brainboxes ES-246 Ethernet to serial adapter has high efficiency data transfer rate of 1000000 baud that is apt to couple with 1 Mbps line drivers for significant operation. The adapter with COM ports is perfect for accessing through TCP and IP sockets from any networked device such as an Android tablet, PC or phone. Requires input power of 5 - 30 VDC. Provides simple and instant-networked serial ports for aiding in effortless usage. Compatible with Microsoft Windows 7 32 bit & 64 bit, Windows Server 2008, Windows Vista, Windows XP and Microsoft Windows 2000 operating systems..Ethernet to serial device server for use in multiple software purposes.Measures 1.1" H x 4" W x 3.9" D.RS232 port for external interface.DB9 9-pin male connector for better connectivity.Offers a 256 FIFO size for transmitting and 32 FIFO size for receiving.EIA - RS232 standard transmits data over a long distance.Fast Ethernet technology for LAN or MAN connection.Transfers 1000000 bits for increased serial data speed.Odd or even parity detects whether the value of any bits has been altered.Tx/Rx modes for point-point communication.4 PCB layers eliminates operator wiring errors.Serial port tunneling allows serial cable replacement over any distance.Requires 5 - 30 VDC power input to operate.Works with Microsoft Windows 8 32, 64 bit Editions/7 32, 64 bit Editions/2000, Windows Server 2008 32 operating systems.Operates at a temperature of 0 to 55 deg C.Certifies to WEEE, RoHS standards.Weighs 0.114 kg.Comes with lifetime warranty enhances performance of your system.Brainboxes Ethernet to serial device server provides access to RS232 serial port and offers user-friendly performance. Perfect for use in multiple software applications.

The Comprehensive® USB 3.0 to Gigabit Ethernet adapter in black, features 9-pin SuperSpeed male USB 3.0 A interface for input and RJ-45 female interface for output. It features plastic chassis for durability. This adapter features compact and lightweight design for maximum portability. It has operating temperature range of 0 - 40 deg C. It is compatible with half/full duplex 10/100/1000 Mbps network. It supports all USB 3.0 power saving modes like U0, U1, U2 and U3. It integrates 10/100/1000 Mbps Gigabit Ethernet MAC/PHY networks. It is backward compatible with older USB 2.0/1.1/1.0 computer systems. This adapter supports Mac, Windows/8/7/XP, Linux and newest Macbook Air OS..USB 3.0 to gigabit Ethernet adapter for fast connectivity.Connections: Input: One USB 3.0 A (9-pin; SuperSpeed) Male, Output: One RJ-45 Female.Host Interface: USB 3.0.Compatible Networks: Half/full duplex 10/100/1000 Mbps operation, Compliant to USB interface version 1.1/2.0/3.0.OS compatibility: Compatible with Mac OS/Windows/8/7/XP/Linux/newest Macbook Air.Dimensions: 0.6"H x 1"W x 2.6" D.Silkscreen Comes in black color.Chassis material: Plastic.Operating temperature: 0 - 40 deg C/32 -104 deg F, Storage temperature: -20 - 60 deg C/-4 - 140 deg F, Relative Humidity: < 80 percent RH.Power: USB powered.Integrates 10/100/1000 Mbps Gigabit Ethernet MAC/PHY and supports all USB 3.0 power saving modes (U0, U1, U2, U3), USB super/high/full speed modes.High performance packet transfer rate over USB bus using proprietary burst transfer mechanism and has compact, lightweight design for portability.Weight: 0.27 lbs..Comes with 2 years warranty.Comes with 2 years limited warranty.COMPREHENSIVE CABLE® USB 3.0 to RJ-45 Gigabit Ethernet adapter in black color increases productivity by adding RJ45 ethernet port to a USB enabled computer system.