Adjustable Height Training Tables

Our All-American Colors BTA-3000 Series tables are designed to offer you the luxury of style and primary-color scheme matched with all the practical advantages of our sturdy blow-molded tables. These color-impregnated tables are 72" long and come with easy height-adjustability from 22 -28.5 , a feature which will enable you to introduce your color design to a broader array of age groups and venues. The powder-coated 17-gauge steel frame legs are pedestal-style and feature gravity slide locks which maintain the tables overall strength and support. Our lightweight unit is designed with a non-bowing eggshell structure for fortification to hold up to 1000 lbs. of distributed weight!.1 ¾" Thick Top.Pedestal Style Legs On BTA Series.BTA-3072 Comes In Primary Colors Red Or Blue & Is Height Adjustable From 22"-28.5"H..1,000 Lb. Weight Capacity.Can Withstand Heat Up To 212 Degrees Fahrenheit.Gravity Slide Lock Or Snap Lock, For Extra Stability.Lightly Textured Surface To Resist Scratching Yet Smooth Enough To Write On.17-Gauge Strength Frame.10 Year Warranty.Primary Colors BTA-3000 Series Adjustable Tables: Durable, Stylish, and Built to Perform

The all-purpose Adapta Table by Studio Designs adjusts in height from 23 to 32 inches in 1" increments. Its durable construction includes a sturdy base with floor levelers for stability and a super tough 1" thick work surface plus T-mold edge band. This table holds up to any job. Main work surface: 36''W x 20''D..Overall Dimensions: 36"W x 22.25"D x 23" - 32"H.Main Work Surface: Area 36"W x 20"D.Super Tough 1" thick work surface with T-mold edge band.Adjustable top height from 23" to 32 " in 1"increments.Powdered coated finish on base for durability.4 floor levelers for stability

The NPS Heavy Duty Table with White Board Top provides for on-the-spot collaboration. From writing to brainstorming, students can easily jot down and share their ideas. The 1.25 thick High Pressure Laminate tabletop is easy to clean and will resist scratches. 16 gauge steel frame apron and 14 gauge legs make this table virtually indestructible. The legs adjust in 1" increments and are locked firmly in place with 2 K-9 external tooth lock washers and heavy duty tamper-free hex screws. All legs come standard with simple-adjust glides and have a caster option. NPS White Board Utility table…it's write-on collaboration..1.25 Thick High Pressure Laminate Top.Legs Built with 1 1/2 Square Tubing 14 Gauge Thickness.Leg Insert Built with 1 1/3Square Tubing 16 Gauge Steel Frame.Whiteboard Top is Easy to Clean.Brackets Connecting the Frame and Legs are 11 Gauge Steel.Legs Built with Tamper - Free Hex Head Screws and Lock Nuts.Steel Legs Adjust Smoothly And Easily In 1" Hole Increments – From 22.25" To 37.25" Height.500 lb Weight Capacity.Steel parts crafted using GMAW (Gas Metal Arc Welding, known as MIG) for superior precision..10 Year Warranty.Innovative and Durable NPS Whiteboard Table – Designed for Creativity and Collaboration

Our All-American Colors BTA-3000 Series tables are designed to offer you the luxury of style and primary-color scheme matched with all the practical advantages of our sturdy blow-molded tables. These color-impregnated tables are 72" long and come with easy height-adjustability from 22 -28.5 , a feature which will enable you to introduce your color design to a broader array of age groups and venues. The powder-coated 17-gauge steel frame legs are pedestal-style and feature gravity slide locks which maintain the tables overall strength and support. Our lightweight unit is designed with a non-bowing eggshell structure for fortification to hold up to 1000 lbs. of distributed weight!.1 ¾" Thick Top.Pedestal Style Legs On BTA Series.BTA-3072 Comes In Primary Colors Red Or Blue & Is Height Adjustable From 22"-28.5"H..1,000 Lb. Weight Capacity.Can Withstand Heat Up To 212 Degrees Fahrenheit.Gravity Slide Lock Or Snap Lock, For Extra Stability.Lightly Textured Surface To Resist Scratching Yet Smooth Enough To Write On.17-Gauge Strength Frame.10 Year Warranty.Primary Colors BTA-3000 Series Adjustable Tables: Durable, Stylish, and Built to Perform

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. . Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

The Trapezoid Activity Table is a versatile option for school classrooms, corporate training centers and your home. Enhance collaborative learning by grouping tables together. It will accommodate children of all ages, from 1st grade to adult. It features a 22.5"W x 45"L high pressure scratch, stain and warp resistant laminate top with a black edge band and 16 gauge tubular steel legs for increased stability. The top incorporates a protective underside backing sheet to prevent moisture absorption and warping. An attractive black powder coated finish protects the upper legs from scratches and height adjustable chrome lower legs give you the flexibility to raise or lower the table a full 9" in 1" increments. Self-leveling nylon floor glides keep the table from wobbling and protect your floor by sliding smoothly when you need to move it. This activity table provides a durable work surface for anything from computer labs to project meetings to laying out fabric in your sewing room..Trapezoid Activity Tables.Color: Gray; Material: Chrome, Laminate, Particleboard, Steel.Overall Dimensions: 22.5"W x 45"D x 21.25" - 30.25"H.Seats up to 3 People.Rated for Commercial Use.Warranty: 3 Years Limited.Collaborative Trapezoid Activity Table.Table can be used alone or grouped together for cooperative learning.Scratch and Stain Resistant Surface.1.25" Thick High Pressure Grey Laminate Top.Black Edge Band.16 Gauge Tubular Steel Legs.Black Powder Coated Upper Legs and Chrome Lower Legs.Legs Adjust in 1" Increments.Self-Leveling Nylon Floor Glides.Recommended Grade Level: 1st Grade - Adult.Recommended Seating Capacity: 1 Adult; 3 Children.No longer strictly used in daycares, schools and in the Church, Activity Tables can be used in the home or any environment where education is the focus and with colorful tops it'll entice children of all ages to learn.

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

The NPS Heavy Duty Table with High Pressure Laminate top is the ideal fit for the classroom environment. The table top is stain and scratch resistant allowing for long term-use. 16 gauge steel frame apron and 14 gauge legs make this table virtually indestructible. The legs adjust in 1" increments and are locked firmly in place with 2 K-9 external tooth lock washers and heavy duty tamper-free hex screws. All legs come standard with simple-adjust glides and have a caster option for easy mobility. NPS Heavy Duty Table with High Pressure Laminate top. Play. Work. Study..Steel Legs Adjust Smoothly And Easily In 1" Hole Increments – From 22.25" To 37.25" Height.Legs Built with 1 1/2 Square Tubing 14 Gauge Thickness.Leg Insert Built with 1 1/3 Square Tubing 16 Gauge Steel Frame.11-Gauge Steel Brackets.Legs Built with Tamper - Free Hex Head Screws and Lock Nuts..75 Table Top Thickness.500 lb Weight Capacity.Steel parts crafted using GMAW (Gas Metal Arc Welding, known as MIG) for superior precision..10 Year Warranty.Sturdy and Versatile NPS High-Pressure Laminate Table – Built to Last for Any Learning Space

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. . Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. . Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24" position up to a full standing 36" position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24" - 36" sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. . Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Give everyone more room with Kee tables. Kee adjustable post legs come four to a set and are height adjustable to accommodate students of all ages. Height is easy for adults to adjust by loosening and tightening a bolt with the included hex key. This 42-inch long classroom table assembles in a snap with just a few screws. The table is constructed of a thermal fused melamine Mahogany laminate tabletop that is 1-inch thick and finished with a black T-Mold edge band. It has an extra-wide 30-inch wide work surface to accommodate more students or larger work materials. Laminates are scratch, stain and burn resistant and wipe clean easily. Rounded corners make the table safer for everyone. A sleek alternative to pedestal style bases, the adjustable post legs come in a classic black with chrome underneath. Adjustable glides on the bottom of the base ensure a level tabletop and are easy to adjust..42 x 30-inch Kee Adjustable Table adjusts from 23-34-inches in height to accommodate students of all ages.Height is easy for adults to adjust by loosening and tightening a bolt with included hex key.Rounded corners make the table safer for everyone.Assembly is a snap with just a few screws.Mahogany laminate tabletop is scratch, stain and burn resistant, wipes clean easily.⚠ WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov.Give everyone more room with Kee tables. Kee Height Adjustable Tables are ideal for rooms with students of all ages.

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Give everyone more room with Kee tables. Kee adjustable post legs come four to a set and are height adjustable to accommodate students of all ages. This 60-inch long classroom table assembles in a snap with just a few screws. The table is constructed of a thermal fused melamine Grey laminate tabletop that is 1-inch thick and finished with a black T-Mold edge band. Laminates are scratch, stain and burn resistant and wipe clean easily. Rounded corners make the table safer for everyone. A sleek alternative to pedestal style bases, the adjustable post legs come in a classic black with chrome underneath. Adjustable glides on the bottom of the base ensure a level tabletop and are easy to adjust..Thermal fused melamine Grey laminate tabletop is scratch, stain and burn resistant.Seats two people.29"H x 60"W x 30"D.Legs adjust from 22 to 33-inches in height making it able to accommodate students of all ages.Height is easy for adults to adjust by loosening and tightening a bolt with included hex key.Adjustable glides on the bottom are interchangeable with optional casters for a mobile option.Rounded corners make the table safer for everyone.⚠ WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24" position up to a full standing 36" position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24" - 36" sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Perfect for training and learning environments, this Flip Top Nesting Table is on wheels for easy mobility. Easily arrange tables for collaboration. When done, simply flip the top down and wheel away for storage. Commercial laminate top and solid steel frame will hold up to heavy use..3/4" Double Sided Thermal Fused Laminate Top.Adjustable Height, can be set to keyboard or desk height or any of nine heights from 23" to 31" in 1" increments.Solid H-Frame Steel Base.Tamper resistant set screws for secure tamper resistant height changes.Four locking casters.Top folds to less than 3 ½" for compact storage.Easy assembly.Made in the USA

Perfect for training and learning environments, this Flip Top Nesting Table is on wheels for easy mobility. Easily arrange tables for collaboration. When done, simply flip the top down and wheel away for storage. Commercial laminate top and solid steel frame will hold up to heavy use..3/4" Double Sided Thermal Fused Laminate Top.Adjustable Height, can be set to keyboard or desk height or any of nine heights from 23" to 31" in 1" increments.Solid H-Frame Steel Base.Tamper resistant set screws for secure tamper resistant height changes.Four locking casters.Top folds to less than 3 ½" for compact storage.Easy assembly.Made in the USA

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Give everyone more room with Kee tables. Kee adjustable post legs come four to a set and are height adjustable to accommodate students of all ages. This 42-inch long classroom table assembles in a snap with just a few screws. The table is constructed of a thermal fused melamine Maple laminate tabletop that is 1-inch thick and finished with a black T-Mold edge band. Laminates are scratch, stain and burn resistant and wipe clean easily. Rounded corners make the table safer for everyone. A sleek alternative to pedestal style bases, the adjustable post legs come in a classic black with chrome underneath. Adjustable glides on the bottom of the base ensure a level tabletop and are easy to adjust..Thermal fused melamine Maple laminate tabletop is scratch, stain and burn resistant.Seats two people.29"H x 42"W x 30"D.Legs adjust from 22 to 33-inches in height making it able to accommodate students of all ages.Height is easy for adults to adjust by loosening and tightening a bolt with included hex key.Adjustable glides on the bottom are interchangeable with optional casters for a mobile option.Rounded corners make the table safer for everyone.⚠ WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Give everyone more room with Kee tables. Kee adjustable post legs come four to a set and are height adjustable to accommodate students of all ages. This 66-inch long classroom table assembles in a snap with just a few screws. The table is constructed of a thermal fused melamine Grey laminate tabletop that is 1-inch thick and finished with a black T-Mold edge band. Laminates are scratch, stain and burn resistant and wipe clean easily. Rounded corners make the table safer for everyone. A sleek alternative to pedestal style bases, the adjustable post legs come in a classic black with chrome underneath. Adjustable glides on the bottom of the base ensure a level tabletop and are easy to adjust..Thermal fused melamine Grey laminate tabletop is scratch, stain and burn resistant.Seats two people.29"H x 66"W x 30"D.Legs adjust from 22 to 33-inches in height making it able to accommodate students of all ages.Height is easy for adults to adjust by loosening and tightening a bolt with included hex key.Adjustable glides on the bottom are interchangeable with optional casters for a mobile option.Rounded corners make the table safer for everyone.⚠ WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24" position up to a full standing 36" position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24" - 36" sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24" position up to a full standing 36" position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24" - 36" sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Save money with this adjustable height rectangular activity table. Adaptable to different users, this table is a versatile option for school classrooms, corporate training centers and your home. Enhance collaborative learning by grouping tables together. It will accommodate children of all ages, from 1st grade to adult. It features a 30"W x 72"L thermal fused scratch, stain and warp resistant gray laminate top with a black edge band and 16 gauge tubular steel legs for increased stability. The top incorporates a protective underside backing sheet to prevent moisture absorption and warping. An attractive black powder coated finish protects the upper legs from scratches and height adjustable chrome lower legs give you the flexibility to raise or lower the table a full 9" in 1" increments. Self-leveling nylon floor glides keep the table from wobbling and protect your floor by sliding smoothly when you need to move it..Rectangular Activity Tables.Color: Gray; Material: Chrome, Laminate, Particleboard, Steel.Overall Dimensions: 30"W x 72"D x 21.125" - 30.125"H.Seats up to 10 People.Rated for Commercial Use.Warranty: 3 Years Limited.Popular Rectangular Activity Table.Scratch and Stain Resistant Surface.1.125" Thick Thermal Fused Gray Laminate Top, Black Edge Band.16 Gauge Tubular Steel Legs.Black Powder Coated Upper Legs and Chrome Lower Legs.Legs Adjust in 1" Increments.Self-Leveling Nylon Floor Glides.Recommended Grade Level: 1st Grade - Adult.Recommended Seating Capacity: 8 Adults; 10 Children.No longer strictly used in daycares, schools and in the Church, Activity Tables can be used in the home or any environment where education is the focus and with colorful tops it'll entice children of all ages to learn.

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Perfect for training and learning environments, this Flip Top Nesting Table is on wheels for easy mobility. Easily arrange tables for collaboration. When done, simply flip the top down and wheel away for storage. Commercial laminate top and solid steel frame will hold up to heavy use..3/4" Double Sided Thermal Fused Laminate Top.Adjustable Height, can be set to keyboard or desk height or any of nine heights from 23" to 31" in 1" increments.Solid H-Frame Steel Base.Tamper resistant set screws for secure tamper resistant height changes.Four locking casters.Top folds to less than 3 ½" for compact storage.Easy assembly.Made in the USA

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24" position up to a full standing 36" position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24" - 36" sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24" position up to a full standing 36" position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24" - 36" sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Advanced adjustment pin system, spring loaded pop pin.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24" position up to a full standing 36" position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24" - 36" sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24" position up to a full standing 36" position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24" - 36" sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24" position up to a full standing 36" position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24" - 36" sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program

Perfect for training and learning environments, this Flip Top Nesting Table is on wheels for easy mobility. Easily arrange tables for collaboration. When done, simply flip the top down and wheel away for storage. Commercial laminate top and solid steel frame will hold up to heavy use..3/4" Double Sided Thermal Fused Laminate Top.Adjustable Height, can be set to keyboard or desk height or any of nine heights from 23" to 31" in 1" increments.Solid H-Frame Steel Base.Tamper resistant set screws for secure tamper resistant height changes.Four locking casters.Top folds to less than 3 ½" for compact storage.Easy assembly.Made in the USA