Audio Speaker Wire

The Monoprice 500 ft. 14AWG CL2 2‑Conductor Speaker Wire (3845) provides exceptional value and versatility for large‑scale audio projects, new home builds, and multi‑room wiring. The long 500‑ft spool ensures you have ample length for extended runs, allowing clean, continuous installation without splicing. The 14‑gauge conductors deliver efficient signal transmission suitable for most residential speakers, ensuring crisp, clear audio over distance. The 2‑conductor design is ideal for traditional single‑speaker or single‑zone wiring, including ceiling speakers, bookshelf speakers, and outdoor zones (when used with appropriate rating considerations). With a CL2 fire‑rated jacket, the cable is approved for in‑wall use and built to withstand the rigors of installation while maintaining flexibility and durability. It’s a smart choice for contractors, integrators, and DIY installers seeking long‑term performance and cost‑effective coverage..Supports advanced features for enhanced connectivity and clarity.Durable build ensures long-lasting reliability in any setup.Flexible design simplifies installation and saves space

Monoprice® 50' RG6 Quad shield CL2 Coaxial cable in white color and is made of two layers of 18 AWG copper braid for added durability. 2200 MHz Cable with 75 ohm impedance has gold plated male F type connector..Connectors are gold-plated.50'.Device supported: Antenna, modem, network device, satellite receiver.18 AWG copper clad steel center conductor is surrounded by foam polyethylene dielectric.100% aluminum-mylar shielding, 60% aluminum braid.75 Ohms 2200 MHz coaxial cables for maximum signal transfer and minimize interference.Gas injected foam polyethylene insulation.Sweep testing ensures 3 GHz performance at applicable frequencies.Sequential foot markers, CM (CL2) rated PVC jacket.Great for Hi-Impact acoustics, antennas, cable television and satellite installations.Features booted and molded.Certifications & standards: UL and CUL Listed.Warranty: Lifetime.Monoprice® 50' RG6 Quad shield CL2 coaxial cable with molded F type connector comes in white color and is ideal for hi impact acoustics, antennas, cable television and satellite installations.

Get the most out of your home audio system with high quality, oxygen-free, pure bare copper speaker wire from Monoprice! This speaker wire features two conductors made of high purity (greater than 99.95% pure), oxygen-free bare copper. Pure Bare Copper is a superior conductor to the copper clad aluminum (CCA) conductors used in most other inexpensive speaker wire. CCA is only about 68% as conductive as pure bare copper. This additional resistance is added to the impedance of your speakers and can negatively effect the sound. For the wire to have no audible effect, the total wire resistance should be no more than 5% of the lowest impedance of your speakers. Even speakers rated for a nominal 8-ohms, may dip to as low as 4-ohms at some frequencies, which further reduces the total cable resistance allowed in the wire. Using Pure Bare Copper speaker wire ensures that the total load put on the amplifier remains as close as possible to the impedance curve of your speakers. For example, a 16AWG 2-conductor Pure Bare Copper speaker wire has a total resistance of 0.803 ohms per 100 feet (both directions must be considered). By comparison, a 16AWG 2-conductor CCA speaker wire has a total resistance of 1.181 ohms per 100 feet. Assuming 4 ohms is the lowest impedance of your speakers, a speaker wire run can be no more 0.2-ohms total. 20 feet of 16AWG Pure Bare Copper would be 0.1606 ohms, well under the 0.2-ohm limit. On the other hand, 20 feet of 16AWG CCA would be 0.2362 ohms, well OVER the 0.2-ohm limit. One side of the clear outer PVC jacket is marked with an easily visible blue stripe to indicate polarity..Supports advanced features for enhanced connectivity and clarity.Durable build ensures long-lasting reliability in any setup.Flexible design simplifies installation and saves space

The Tripp Lite Mini Stereo Audio Male to Female Extension Cable, 25 ft., allows you to increase the audio signal distance from your PC or other stereo devices to speakers without any loss of signal quality. It features fully molded ends and braided shielding that repels unwanted EMI/RFI interference, resulting in a clean audio signal..3.5mm-male to 3.5mm-female.Fully shielded.Fully molded ends.Braided shielding.Nickel-plated connectors.Lifetime limited warranty.25 ft.

The C2G ® 25' high speed HDMI audio/video cable with Ethernet, supports new HDMI features like UltraHD and 4k at 50/60. It is great for connecting multimedia source devices in home theater, desktop or commercial audio video applications requiring high speed HDMI features. This cable features CL2 rated cable jacket for in-wall installations. The Ethernet allows a user to connect multiple Ethernet enabled HDMI devices through a single Ethernet connection. This cable supports Dolby ® True HD, DTS-HD master audio and up to 32 audio channels for a multi-dimensional audio experience..Cable length: 25'.Connections: One 19-pin HDMI male connector on both ends.PVC jacket, braid shield or aluminum foil shield protects against unwanted EMI/RFI interference.Features HDPE or foamed PE insulation, 28 AWG 5-pair, four tinned copper conductors and 1 u m gold plating for better conductivity.Comes in black color.Maximum resolution supported: 4K (2160p), which is 4 times the clarity of 1080p/60 video resolution.Supports 3D video, deep color and x.v. color, high bandwidth or high speed data transfer.Offers Dolby true HD, DTS-HD master audio and up to 32 audio channels for a multi-dimensional immersive audio experience.Provides up to 1536 kHz audio sample frequency for the highest audio fidelity.Simultaneously delivers dual video streams and multi-stream audio to multiple users.Supports the wide angle theatrical 21 : 9 video aspect ratio and dynamic synchronization of video as well audio streams.Meets ATC, UL standards and certifications.Weight: 1.96 lbs..Comes with lifetime warranty.Resistance: 10 mega ohm insulation, Nominal attenuation: 300 kHz - 825 MHz at 8dB, 825 MHz - 2.475 GHz at 21dBDimensions: 13 mm H x 21 mm W x 39 mm D, 7.3 + 0.2 mm O.D. jacket.Weight: 1.96 lbs..Comes with lifetime warranty

Get the most out of your home audio system with high quality, oxygen-free, pure bare copper speaker wire from Monoprice! This speaker wire features two conductors made of high purity (greater than 99.95% pure), oxygen-free bare copper. Pure Bare Copper is a superior conductor to the copper clad aluminum (CCA) conductors used in most other inexpensive speaker wire. CCA is only about 68% as conductive as pure bare copper. This additional resistance is added to the impedance of your speakers and can negatively effect the sound. For the wire to have no audible effect, the total wire resistance should be no more than 5% of the lowest impedance of your speakers. Even speakers rated for a nominal 8-ohms, may dip to as low as 4-ohms at some frequencies, which further reduces the total cable resistance allowed in the wire. Using Pure Bare Copper speaker wire ensures that the total load put on the amplifier remains as close as possible to the impedance curve of your speakers. For example, a 16AWG 2-conductor Pure Bare Copper speaker wire has a total resistance of 1.636 ohms per 100 feet (both directions must be considered). By comparison, a 16AWG 2-conductor CCA speaker wire has a total resistance of 2.406 ohms per 100 feet. Assuming 4 ohms is the lowest impedance of your speakers, a speaker wire run can be no more 0.2-ohms total. 10 feet of Pure Bare Copper would be 0.1606 ohms, well under the 0.2-ohm limit. On the other hand, 10 feet of CCA would be 0.2406 ohms, well OVER the 0.2-ohm limit. Each conductor is jacketed with color-coded PVC for easy polarity identification. The entire cable assembly is jacketed in a white, CL2-rated PVC material. The CL2 rating indicates that the cable complies with fire safety and insurance requirements, making it safe for use inside the walls of residential class buildings..Supports advanced features for enhanced connectivity and clarity.Durable build ensures long-lasting reliability in any setup.Flexible design simplifies installation and saves space

Get the most out of your home audio system with high quality, oxygen-free, pure bare copper speaker wire from Monoprice! This speaker wire features two conductors made of high purity (greater than 99.95% pure), oxygen-free bare copper. Pure Bare Copper is a superior conductor to the copper clad aluminum (CCA) conductors used in most other inexpensive speaker wire. CCA is only about 68% as conductive as pure bare copper. This additional resistance is added to the impedance of your speakers and can negatively effect the sound. For the wire to have no audible effect, the total wire resistance should be no more than 5% of the lowest impedance of your speakers. Even speakers rated for a nominal 8-ohms, may dip to as low as 4-ohms at some frequencies, which further reduces the total cable resistance allowed in the wire. Using Pure Bare Copper speaker wire ensures that the total load put on the amplifier remains as close as possible to the impedance curve of your speakers. For example, a 16AWG 2-conductor Pure Bare Copper speaker wire has a total resistance of 0.803 ohms per 100 feet (both directions must be considered). By comparison, a 16AWG 2-conductor CCA speaker wire has a total resistance of 1.181 ohms per 100 feet. Assuming 4 ohms is the lowest impedance of your speakers, a speaker wire run can be no more 0.2-ohms total. 20 feet of 16AWG Pure Bare Copper would be 0.1606 ohms, well under the 0.2-ohm limit. On the other hand, 20 feet of 16AWG CCA would be 0.2362 ohms, well OVER the 0.2-ohm limit. Each conductor is jacketed with color-coded PVC for easy polarity identification. The entire cable assembly is jacketed in a white, CL2-rated PVC material. The CL2 rating indicates that the cable complies with fire safety and insurance requirements, making it safe for use inside the walls of residential class buildings..Supports advanced features for enhanced connectivity and clarity.Durable build ensures long-lasting reliability in any setup.Flexible design simplifies installation and saves space

Monoprice Plenum Speaker Wire is designed to meet the most stringent standards of safety for both residential and commercial applications. The fire-retardant cable jacket has been tested by Underwriters Laboratories and bears the CMP plenum air space safety rating, making it ideal for use in any situation. Available in a variety of lengths and gauges, you can choose two-conductor versions, for connecting a single speaker, or four-conductor versions for connecting speaker pairs. The 100% pure oxygen-free copper conductors are sheathed in color-coded jackets contained with the main CMP-rated jacket. Backed up by Monoprice's Lifetime Warranty, Monoprice Plenum Speaker Wire series is the ultimate speaker wire for commercial and residential installations. UL Plenum Rated 100% Pure Bare Copper Various Lengths and Gauges 2 or 4 Color-Coded Conductors Soft and Flexible Cable Jacket UL Plenum Rated: Monoprice Plenum Speaker Wire uses an external cable jacket, which has been specially treated to resist the spread of fire. It has been CMP rated by Underwriters Laboratories (UL) as safe for use in the plenum ducts and airspaces of commercial class buildings, making it the ideal speaker wire choice for any situation. 100% Pure Bare Copper: Featuring 100% pure, bare, oxygen-free copper conductors, these speaker wires faithfully and accurately reproduce music with total sonic clarity. Various Lengths and Gauges: Available in 12, 14, 16, and 18 AWG sizes, and in 50, 100, 250, and 500 foot lengths, Monoprice has the speaker wire that is perfect for your needs. 2 or 4 Color-Coded Conductors: Connect a single speaker using the 2-conductor wire or connect a stereo pair using the 4-conductor variant. Each version has uniquely colored inner jackets so you can easily match polarity at each end. Soft and Flexible Cable Jacket: While most plenum rated cables are stiff, Monoprice Plenum Speaker Wire uses a specially treated jacket, which keeps it as soft and flexible as ordinary speaker cable. Monoprice Lifetime Warranty on ALL Cables With Monoprice's Lifetime Warranty you can rest assured we stand behind our products and our customers. Quality at a Fair Price Monoprice's rugged design and rigid quality control standards deliver high quality products at fair prices. 1 Service & Support You're never on your own with Monoprice products! We have a full team of friendly and knowledgeable technicians available to answer your questions, both before and after the sale. Contact our technical support team for questions about our products, troubleshooting, or even suggestions for products to fit your particular needs. Not to be outdone, our friendly and helpful customer service team is here to make your ordering, delivery, and any possible returns a quick and painless operation, from start to finish!.Supports advanced features for enhanced connectivity and clarity.Durable build ensures long-lasting reliability in any setup.Flexible design simplifies installation and saves space

Monoprice Select Speaker Wire features a durable plastic jacket with a color coded conductor to distinguish polarity. The high strand count 14 AWG conductors will easily route though entertainment centers and speaker stands. Monoprice Select speaker wire, available in 50 and 100 foot spools, is the best cost-effective solution for your sound system. Backed by Monoprice's lifetime warranty, rest assured that you have picked the best cable for your home theater system. Features: Cost effective and easy to set up with quality sound High-strand count (0.254mm x 41 strands) copper clad aluminum 14 AWG conductors easily route though entertainment centers and speaker stands Compatible with High-Quality Gold Plated Speaker Banana Plugs Clear insulated jacket is market with a stripe on one side for easy polarity identification Comes wrapped around a hard plastic spool that makes dispensing convenient and easy Lifetime Warranty.Supports advanced features for enhanced connectivity and clarity.Durable build ensures long-lasting reliability in any setup.Flexible design simplifies installation and saves space

The C2G ® 15' high speed HDMI audio/video cable with Ethernet, connects a multimedia device to a display and support the latest HDMI features like Ultra HD, 4k at 50/60, up to 32 audio channels as well as wide angle theatrical 21:9 video aspect ratio. It is great is for home theater or desktop audio video applications. The Ethernet allows a user to connect multiple Ethernet enabled HDMI devices through a single Ethernet connection for updating device firmware. This cable supports Dolby ® True HD, DTS-HD master audio and up to 32 audio channels for a multi-dimensional audio experience..Audio/video cable with Ethernet is a perfect solution for home theater or desktop audio video applications.Cable length: 15'.Connections: One HDMI male connector on both ends.PVC jacket, braid shield or aluminum foil shield protects against unwanted EMI/RFI interference.Features HDPE or foamed PE insulation, 30 AWG 5-pair tinned copper conductors, 30 AWG drain wire conductor for better conductivity.Comes in black color.Resistance: 100 ohm insulation, Nominal attenuation: 300 kHz - 825 MHz at <5dB, 825 MHz - 2.475 GHz at <5dB.Dimensions: 10 mm H x 20 mm W x 37.1 mm D, 6 + 0.2 mm O.D. jacket.Power supply: 30 V, Dielectric strength: 500 VAC/1 min.Minimum bend radius: 60 deg.Maximum resolution supported: 4K (2160p), which is 4 times the clarity of 1080p/60 video resolution.Supports 3D video, deep color and x.v. color, high bandwidth or high speed data transfer.Offers Dolby true HD, DTS-HD master audio and up to 32 audio channels for a multi-dimensional immersive audio experience.Provides up to 1536 kHz audio sample frequency for the highest audio fidelity.Simultaneously delivers dual video streams and multi-stream audio to multiple users.Supports the wide angle theatrical 21 : 9 video aspect ratio and dynamic synchronization of video as well audio streams.Weight: 0.45 lbs..Comes with lifetime warranty

Connect your speakers using this easy-to-route, 16AWG Pure Copper Flat Speaker Wire from Monoprice! This speaker wire comes in a flat package, which is easier to route in and around stereo equipment racks, corners, and other equipment than ordinary round speaker wire. It features cable markings on one of the two conductors and has an overall size of 12.4 x 2.0 mm. The PVC jacket is CL2 rated, making it safe for routing within and through the walls of residential class buildings..Ensures fast signal transmission with minimal interference.Durable construction designed for long-term use.Flexible design allows easy installation and space savings

Designed for longer audio runs without compromising signal integrity, the Monoprice 25 ft. RCA Male‑to‑Male 22AWG Premium Audio Cable provides powerful, noise‑free analog sound for home theater systems, professional audio equipment, and custom installations. Its heavy‑duty 22AWG conductors and robust shielding deliver exceptional signal clarity, reducing hum and interference even over extended distances. The corrosion‑resistant connectors ensure a secure, dependable connection, while the durable black jacket offers flexibility and long‑term resilience. Perfect for connecting amplifiers, receivers, subs, mixers, and more, this 25‑foot premium RCA cable ensures smooth, high‑quality audio transmission wherever you need extended reach..Delivers fast data transfer and optimal signal quality.Constructed with durable materials for long-lasting use.Slim design ensures easy installation and space efficiency

You can rely on Monoprice as the source for your high-performance, high-quality speaker cables with NL4FC connectors! These 2-conductor speaker connection cables are made with high-purity, 12 AWG copper wire for maximum current handling capability. They feature black and blue colored plastic NL4FC female connectors at each end, with spring-loaded lock release latches..Ensures fast signal transmission with minimal interference.Durable construction designed for long-term use.Flexible design allows easy installation and space savings

The C2G ® 12' male/male stereo audio cable is perfect for connecting audio devices. It easily connects a PC sound card, portable CD player or any mini-stereo audio device with 3.5 mm jacks to a multimedia speaker. It features two copper conductors and a braid shielded drain that prevents unwanted EMI/RFI interference. The fully molded nickel-plated connectors provide excellent strain relief for long lasting usage..Cable length: 12'.Has 3.5mm mini-phone male stereo connector on first end and 3.5mm mini-phone male stereo connector on second end.Shielded to help reduce interference and fully molded connector and strain relief provides flexibility at the connection points.RoHs Compliant.Weight: 0.125 lbs..Comes with lifetime warranty.Supports both analog and digital displays

The Monoprice Coaxial Audio/Video Cable (6306) is a high‑quality 15 ft RG‑6/U digital coax cable designed for clean, accurate transmission of S/PDIF digital audio, subwoofer signals, composite video, and other RCA‑based AV connections. Its double copper‑braid shielding helps reduce interference and signal loss, ensuring stable, noise‑free performance, while gold‑plated RCA male connectors provide corrosion resistance and strong signal integrity. The CL2‑rated jacket allows safe in‑wall installation for home theaters and professional AV setups, and the molded connector housings add long‑term durability. Ideal for subwoofers, DVD players, TVs, and home entertainment systems, this cable delivers reliable 75‑ohm performance for both digital and analog applications..Ensures fast signal transmission with minimal interference.Durable construction designed for long-term use.Flexible design allows easy installation and space savings

The C2G ® 25' black mini-phone audio cable allows connection of CD players, stereos, speakers, PC/TV tuners and other audio devices to a multimedia speaker. It features fully molded connectors for strain relief and nickel plated contacts for superior connectivity..Cable length: 25'.Connections: One mini-phone male connector on both ends.Braid shield design effectively minimizes interference.Features fully molded copper conductor for excellent strain relief while nickel plated contacts provide superior connectivity.Comes in black color.Allows for the connection of hardware such as MP3 or CD players, tablets, speakers, PC/TV tuners and other audio devices to a multimedia speaker.Excellent performance with lasting quality.Weight: 0.24 lbs..Comes with lifetime warranty