Bondhus Tools
5 results
Bondhus® 9 Pieces Ball End Stubby Hex Key Set, 1.5-10 mm.Size: 1.5-10 mm.Handle type: L-Handle.Number of Piece: 9.Material: Steel.Finish: ProGuard.Smaller inside radius for tight spaces.Allows lower clearance.Balldriver® tip on long arm for angle entry to 25° and fast screw removal.Stubby hex keys provide the same advantages as a full size hex key, but reach areas where overhead clearance is tight.Includes: 1.5 mm, 2 mm, 2.500 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm, bondhex color coded case.Bondhus® Stubby Hex Key Set ahs hex keys that provide the same advantages as a full size hex key, but reach areas where overhead clearance is tight.
Bondhus® GorillaGrip® Fold-Ups, 2mm-8mm..Size: 2-8 mm.Handle type: Red Fold-Up.Number of Piece: 7.Material: Steel.Finish: ProGuard.Chamfered tool tips eliminate burrs and help tools seat in screws.Has Speed-wrench feature and comes with Gorrilagrip® handle which is up to 40% stronger than steel handles.Molded-in 90° stop.Patented spacers between tools that open from top and bottom.Turn and flip feature and no repositioning the tool when working against obstructions.Includes: 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm.7 Pieces.WorldÆs strongest handle.Speed-wrench feature.Tools open from both the top and bottom.Patented spacers between tools.Gorrilagrip handle is up to 40% strong than steel handles.Turn and flip feature, no repositioning the tool when working against obstructions.Includes : 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm.Bondhus® GorillaGrip® Hex Key Set has GorrilaGrip® handle which is up to 40% stronger than steel handles.
Bondhus® Gorillagrip® 8 Pieces star torx key set has a size of T6 - T25 and is made of Protanium® steel for durability. Star torx key set has fold-up design and can be used as a screwdriver when opened to 90 deg..Handle type: Green Fold-Up.Number of Piece: 8.Material: Protanium® Steel.Finish: ProGuard.Advantage of a fold-up is the convenience of a range of blade sizes in one package. It is also easy to carry in a pocket.With a blade in the 180° position, a fold-up can be used for spinning a fastener in or out. It can be used like a screwdriver when opened to 90°.Care should be exercised when using a fold-up with a small blade size. The very nature of the fold-up design makes it possible to over-torque small blades.Bondhus® GorillaGrip® Torx Key Set with a blade in the 180° position allows a fold-up to be used for spinning a fastener in or out. It can be used like a screwdriver when opened to 90°.
Bondhus Hex Key Set has sharper corners for extra grab. This set provides an inexpensive and convenient solution for occasional or low volume fastener insertion or removal..Size: 0.05 - 3/8 Inches, 1.5-10 mm.Handle type: L-Handle.Number of Pieces: 22.Material: Steel.Finish: ProGuard.Corrosion resistance.Sharper corners for extra grab.Assembled from our most popular sets.Multiple sets per package.Tip selections include ball end, star tip, hex end, and Prohold tip ball end.Includes: 12137 0.050-inch, 1/16-inch, 5/64-inch, 3/32-inch, 7/64-inch, 1/8-inch, 9/64-inch, 5/32-inch, 3/16-inch, 7/32-inch, 1/4-inch, 5/16-inch, 3/8-inch, 12199 1.500 mm, 2 mm, 2.500 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm, bondhex color coded case.Made in USA.Bondhus 22 Pieces Long Length Combination Hex Key Set, 0.05-3/8 Inches, 1.5-10 mm
The Bondhus GorillaGrip 9-Piece Hex Key Set is designed for durability, convenience, and precision. Featuring nine hex key sizes ranging from 0.05 inches to 3/16 inches, this compact fold-up set ensures easy access to the right tool for various fastening applications. Constructed from Protanium high-torque steel, it offers superior strength and longevity, while the ProGuard finish resists rust and corrosion. The GorillaGrip handle, 40% stronger than steel handles, provides a comfortable and secure grip for efficient use. With its red finish, this hex key set is a reliable addition to any toolbox..Handle type: Yellow Fold-Up.Number of Pieces: 9.Material: Steel.Finish: ProGuard.Chamfered tool tips eliminate burrs and help tools seat in screws.Has Speed-wrench feature and comes with Gorrilagrip handle which is up to 40% stronger than steel handles.Molded-in 90° stop.Patented spacers between tools that open from top and bottom.Turn and flip feature and no repositioning the tool when working against obstructions.Includes: 0.050-inch, 1/16-inch, 5/64-inch, 3/32-inch, 7/64 in, 1/8-inch, 9/64-inch, 5/32-inch, 3/16-inch
You May Also Like
Eklind® Ergo-Fold™ 9 Pieces small handle hex key set has a size of 0.050" - 3/16" and features a composite grip handle for superior ergonomics. Hex key set has soft cushion grip insert that offers slip resistance..Size: 0.05 - 3/16-inches.Number of Piece: 9.Handle Type: Red Composite Grip.Finish: Black Oxide.A Soft cushion grip insert offers comfort and slip resistance, while a hard shell provides maximum strength.Ergo-Fold™ key sets feature a composite grip handle shaped for superior ergonomics.Includes: 0.050-inch, 1/16-inch, 5/64-inch, 3/32-inch, 7/64-inch, 1/8-inch, 9/64-inch, 5/32-inch, 3/16-inch.Type: Frame style, holding power.Length: 2 3/4 in.Width: 2 3/8 in.Dressing type: Film.Design: Sacral.Providing all of the benefits of Tegaderm™ dressings, Tegaderm™ HP dressings have a special adhesive and film that differentiate it form standard Tegaderm™ film dressings.The hydrophilic nature of Tegaderm™ HP Film adhesive makes it more adherent and useful in moist conditions and difficult-to-dress areas.It offers holding power in challenging clinical conditions, reducing unscheduled dressing changes.Transparent film dressings designed to secure the catheter in challenging I.V. applications.Many with notches and borders reinforced with a soft cloth fabric, designed to reduce edge lift and to seal around the insertion site.Eklind® Tool Ergo-Fold™ 7 Pieces Small Handle Hex Key Set can be used at a right angle to generate maximum torque. Additionally, they can be used as a screwdriver with the key folded out to a firm stop.
Eklind® Ergo-Fold™ 9 Pieces large handle hex key set has a size of 5/32" - 3/8" and features a composite grip handle for superior ergonomics. Hex key set has soft cushion grip insert that offers slip resistance..Size: 5/64 - 1/4-inches.Number of Piece: 9.Handle Type: Red Composite Grip.Finish: Black Oxide.A Soft cushion grip insert offers comfort and slip resistance, while a hard shell provides maximum strength.Ergo-Fold™ key sets feature a composite grip handle shaped for superior ergonomics.Includes: 5/64-inch, 3/32-inch, 7/64-inch, 1/8-inch, 9/64-inch, 5/32-inch, 3/16-inch, 7/32-inch, 1/4-inch.Type: Frame style, holding power.Length: 2 3/4 in.Width: 2 3/8 in.Dressing type: Film.Design: Sacral.Providing all of the benefits of Tegaderm™ dressings, Tegaderm™ HP dressings have a special adhesive and film that differentiate it form standard Tegaderm™ film dressings.The hydrophilic nature of Tegaderm™ HP Film adhesive makes it more adherent and useful in moist conditions and difficult-to-dress areas.It offers holding power in challenging clinical conditions, reducing unscheduled dressing changes.Transparent film dressings designed to secure the catheter in challenging I.V. applications.Many with notches and borders reinforced with a soft cloth fabric, designed to reduce edge lift and to seal around the insertion site.Eklind® Tool Ergo-Fold™ 7 Pieces Small Handle Hex Key Set can be used at a right angle to generate maximum torque. Additionally, they can be used as a screwdriver with the key folded out to a firm stop.
Eklind® Ergo-Fold™ 6 Pieces large handle hex key set has a size of 5/32" - 3/8" and features a composite grip handle for superior ergonomics. Hex key set has soft cushion grip insert that offers slip resistance..Size: 5/32 - 3/8-inches.Number of Piece: 6.Handle Type: Red Composite Grip.Finish: Black Oxide.A Soft cushion grip insert offers comfort and slip resistance, while a hard shell provides maximum strength.Ergo-Fold™ key sets feature a composite grip handle shaped for superior ergonomics.Includes: 5/32-inch, 3/16-inch, 7/32-inch, 1/4-inch, 5/16-inch, 3/8-inch.Eklind® Tool Ergo-Fold™ 7 Pieces Small Handle Hex Key Set can be used at a right angle to generate maximum torque. Additionally, they can be used as a screwdriver with the key folded out to a firm stop.
Eklind Tool Hex-L 8 Pieces short arm fold-up hex key set has hex keys in black oxide finish is made of durable steel to resist corrosion. Key set features ergonomically designed composite handle and has slip resistant soft cushion-grip insert..Size: 0.05-5/32 inches.Number of Piece: 8.Material: Steel.Finish: Black Oxide.Includes: 0.050-inch, 1/16-inch, 5/64-inch, 3/32-inch, 7/64-inch, 1/8-inch, 9/64-inch, 5/32-inch.Eklind® Tool Hex-L® Short arm fold-up hex key set includes 8 pieces of handles with hexagonal tip size ranging from 0.050" - 5/32".
Eklind® Ball-Hex-l™ 13 Pieces hex ball long arm hex key set has a size of 0.050" - 3/8" and offers 360 deg of rotation at up to a 35 deg angle. Hex key set has burr-free short arm that allows the user to apply maximum torque in applications..Number of Piece: 13.Handle Type: L-Handle.Finish: Black oxide.Provides 360 degrees of rotation at up to a 35 degrees angle.The burr-free short arm allows the user to apply maximum torque in required applications.Color coded compact holders.Finished to resist rust.Includes: 0.050-inch, 1/16-inch, 5/64-inch, 3/32-inch, 7/64-inch, 1/8-inch, 9/64-inch, 5/32-inch, 3/16-inch, 7/32-inch, 1/4-inch, 5/16-inch, 3/8-inch, Molded plastic holder.Eklind® Tool Ball-Hex-L™ 11 Pieces Hex Ball Long Arm Hex Key Set has burr-free short arm that allows you to apply maximum torque in required applications.
Eklind® Tool Hex-L® Long arm hex key set has black oxide finished pieces made of chrome nickel alloy steel to resist corrosion. Hex key set is heat treated for added strength and is enclosed in a plastic holder..Size: 0.05 - 3/8-inch, 1.5 - 10 mm.Number of Piece: 22.Handle Type: L-Handle.Material: 8650 Chrome Nickel Alloy Steel.Finish: Black Oxide.Produced from 8650 chrome nickel alloy steel.Heat-treated for superior strength.Hex Corners are Sharp and Clean.Finished to resist rust.Color coded compact holders.Includes: 0.050 in, 1/16 in, 5/64 in, 3/32 in, 7/64 in, 1/8 in, 9/64 in, 5/32 in, 3/16 in, 7/32 in, 1/4 in, 5/16 in, 3/8 in, 1.500 mm, 2 mm, 2.500 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm, plastic holder.Eklind® Tool Hex-L® Long arm hex key set includes 22 pieces of L-handles with hexagonal tip size ranging from 0.05" - 3/8" and 1.5 - 10 mm.
Eklind® Tool Hex-L® 9 Pieces long arm hex key set has black oxide finished pieces made of chrome nickel alloy steel to resist corrosion. Hex key set is heat treated for added strength and is enclosed in a plastic holder..Size: 1.5 - 10 mm.Number of Piece: 9.Handle Type: L-Handle.Material: 8650 Chrome Nickel Alloy Steel.Finish: Black Oxide.Produced from 8650 chrome nickel alloy steel.Heat-treated for superior strength.Hex Corners are Sharp and Clean.Finished to resist rust.Color coded compact holders.Includes: 1.5 mm, 2 mm, 2.500 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm, molded plastic holder.Eklind® Tool Hex-L® Long arm hex key set includes 9 pieces of L-handles with hexagonal tip size ranging from 1.5 - 10 mm.
Eklind® Tool Hex-L® 9 Pieces short arm hex key set has black oxide finished pieces made of chrome nickel alloy steel to resist corrosion. Hex key set is heat treated for added strength and is enclosed in a plastic holder..Size: 1.5 - 10 mm.Number of Piece: 9.Handle Type: L-Handle.Material: 8650 Chrome Nickel Alloy Steel.Finish: Black Oxide.Produced from 8650 chrome nickel alloy steel.Heat-treated for superior strength.Hex Corners are Sharp and Clean.Finished to resist rust.Color coded compact holders.Includes: 1.5 mm, 2 mm, 2.500 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm, molded plastic holder.Eklind® Tool Hex-L® Short arm hex key set includes 9 pieces of L-handles with hexagonal tip size ranging from 1.5 - 10 mm.
Eklind® Ball-Hex-l™ 22 Pieces hex ball long arm hex key set has a size of 1.5 mm - 10 mm and offers 360 deg of rotation at up to a 35 deg angle. Hex key set has burr-free short arm that allows the user to apply maximum torque in applications..Size: 0.05 - 3/8-inch, 1.5 - 10 mm.Number of Piece: 22.Handle Type: L-Handle.Finish: Black oxide.Provides 360 degrees of rotation at up to a 35 degrees angle.The burr-free short arm allows the user to apply maximum torque in required applications.Color coded compact holders.Finished to resist rust.Includes: 0.050-inch, 1/16-inch, 5/64-inch, 3/32-inch, 7/64-inch, 1/8-inch, 9/64-inch, 5/32-inch, 3/16-inch, 7/32-inch, 1/4-inch, 5/16-inch, 3/8-inch, 1.500 mm, 2 mm, 2.500 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm, Plastic Holder.Made in USA.Eklind® Tool Ball-Hex-L™ 11 Pieces Hex Ball Long Arm Hex Key Set has burr-free short arm that allows you to apply maximum torque in required applications.
Eklind® Individual cushion grip hex T-key has a size of 5/32" is made of steel for durability. Hex T-key has T-handle standard grip and comes with a black oxide finish for an elegant look..Size: 5/32-inch.Handle Type: T-Handle Cushion Grip.Material: Steel.Finish: Black Oxide.Soft cloth backing is breathable, flexible and conformable, yet is gentle to the skin for increased patient comfort.
Eklind® Individual cushion grip hex T-key has a size of 3/16" is made of steel for durability. Hex T-key features T-handle standard grip and comes with a black oxide finish for an elegant look..Size: 3/16-inch.Handle Type: T-Handle Cushion Grip.Material: Steel.Finish: Black Oxide.Soft cloth backing is breathable, flexible and conformable, yet is gentle to the skin for increased patient comfort.
Eklind® Ball-Hex-l™ 11 Pieces hex ball long arm hex key set has a size of 0.050" - 1/4" and offers 360 deg of rotation at up to a 35 deg angle. Hex key set has burr-free short arm that allows the user to apply maximum torque in applications..Size: 0.05 - 1/4-inch.Number of Piece: 11.Handle Type: L-Handle.Finish: Black oxide.Provides 360 degrees of rotation at up to a 35 degrees angle.The burr-free short arm allows the user to apply maximum torque in required applications.Color coded compact holders.Finished to resist rust.Includes: 0.050-inch, 1/16-inch, 5/64-inch, 3/32-inch, 7/64-inch, 1/8-inch, 9/64-inch, 5/32-inch, 3/16-inch, 7/32-inch, 1/4-inch, Molded plastic holder.Eklind® Tool Ball-Hex-L™ 11 Pieces Hex Ball Long Arm Hex Key Set has burr-free short arm that allows you to apply maximum torque in required applications.
Wiha® Tools 39-Piece security insert bit set includes Hex, Phillips®, Torx® pozidriv, slotted, square, torq-set and spanners. 8.4" Bit features 4" long round shank and has a hole drilled in center to fit over security pin..Number of Piece: 39.Tip type: Hex, Phillips, Pozidriv, Slotted, Square, Torq-Set and Spanner.Shank type: Round.Shank size: 4-inch Length.Hole drilled in center of bit fits over security pin.Made from Wiha® CRM-72 modified tool steel.Natural finish and machined onto 1/4 hex.Guaranteed quality; Made in Germany.Includes: 5/64-inch, 3/32-inch, 7/64-inch, 1/8-inch, 9/64-inch, 5/32-inch tr- hex, tr8, 10, 15, 20, 25, 27, 30, 40 tr-torx, #4, #6, #8, #10 spanner, #1, #2, #3, #4 tri-wing, #6, #8, #10 torq-set, standard bits: #1, #2, #3 square, #0, #1, #2, #3 pozidriv, 6.5 mm, 8.0 mm slotted, #1, #2 Phillips, bit holding handle, 1/4-inch magnetic driver, 1/4-inch bit holding socket.⚠WARNING: This product can expose you to PVC/PET/Ni/CrVI, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.Wiha® Tools 39 Pieces Security Hex Insert Bit Set has an ergonomically designed handle and is hardened for high torque performance.
The Stanley Long-Arm SAE and Metric Hex Key Set includes 22 strong steel, rust-resistant hex keys in many popular SAE and metric sizes. This handy set comes with 2 labeled holders that make it easy to find exactly the size you need for your job. Hang the holders on the wall for convenient access and organization!.Strong steel hex keys with black oxide coating.Durable plastic molded holders with garage storage hang holes.Labeled holders for easy organization.Long arms for ease of use.SAE sizes include: .05 in., 1/16 in., 5/64 in., 3/32 in., 7/64 in., 1/8 in., 9/64 in., 5/32 in., 3/16 in., 7/32 in., 1/4 in., 5/16 in., and 3/8 in..Metric sizes include: 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, and 10 mm
Wiha® Tools 7-Piece screwdriver set includes drivers of size 00/0/1 Phillips® tip and 1.5 mm/2 mm/2.5 mm/3 mm wide slotted tip. Screwdriver is 10.2" long and features round shank with non-slip vapor hard chromed satin tip..Tip size: #00 - #1, 1.5-3 mm Width.Number of Piece: 7.Tip type: Phillips, Slotted.Shank type: Round.Exact fit precision machined tips.Vapor hard chromed satin non slip tips.Hardened for maximum durability.All handles are molded onto blades.Spin free finger control caps.Includes: 1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm slotted, #00, 0, 1 Phillips.⚠WARNING: This product can expose you to PVC/PET/Ni/CrVI, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.Wiha® Tools 7 Pieces Phillips Slotted Tip Precision Tool Set has precision screwdrivers and torque control set.
Klein Tools® 6-Piece Screwdriver set features chrome plated shank with precision-machined tip and a comfortable cushion grip plastic handle. Set includes 601-3 cabinet tip, 600-4/600-6 keystone tip and 603-3/603-4/603-6 Philips® tip screwdrivers..Finish: Chrome plated shank.Number of piece: 6.Specification: ASME/ANSI.Cushion-grip handle allows for greater torque and comfort.Patented Tip-Ident® quickly identifies the type of screwdriver and screwdriver tip orientation.Premium chrome plated for smooth feel and corrosion resistance; Internal flanges inside handle provide solid, twist-resistant blade anchor.Precision-machined tip for exact fit; Special heat-treated shafts.Includes one cabinet-tip, two keystone-tip, and three Phillips-tip screwdrivers; Contains: 601-3 round-shank and cabinet-tip, 600-4, 600-6 square-shank and keystone-tip, 603-3, 603-4, 603-6 round-shank and philips-tip and a reusable plastic container.Weight: 1 1/2 lb..Internal flanges inside handle provide solid, twist-resistant blade anchor.Special heat-treated shafts.⚠WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.Klein Tools® 6 pcs Cushion Grip Screwdriver Set is precision-machined tip for exact fit.