Cage Nuts for Racks

Tripp Lite Cage nut and bolt comes in a package that includes 50 each M6 cage nuts and bolts to fasten equipment to square hole rackmount rails. Cage nut and bolt is compatible with all square hole racks..50 Each.Compatibility: All square hole racks (EIA 310D).Used to fasten equipment to square hole rackmount rails.Includes 50 pcs M6 cage nut zinc, 50 pcs M6 pan head screw and 50 pcs PVC black cup washer.Warranty: 5 years limited.Lifetime limited warranty.Management: CLI, HTTP, DHCP, HTTPs, Syslog, IEEE 802.1Q VLAN, IEEE 802.1p QoS, Junos OS.Compatibility: PC.Input voltage: 110 - 220 VAC.Altitude: Up to 10000' (3,049 m) operating.Flash memory: 1 GB.Compatible rack unit: 1U.Operating temperature: 32 - 113 deg F.Operating humidity range: 10 - 85% non-condensing.Black/Silver.Tripp Lite Cage nut and bolt are compatible with all square hole rack enclosure cabinets.

StarTech.com Cage nuts are designed with square cage design with square holes and are used to for mounting equipment securely. Nuts include 50 pieces in a package which provides enough mounting hardware to setup any rack. ..M5 cage nuts.Mount server, telecom and A/V equipment with these high quality nuts.Package includes: 50 M5 nuts.Square cage nut design for racks and cabinets with square holes.Stainless steel construction.Includes: 1 Pkg of cage nuts for cabinet rails.Thread Type(s): M5.Compatibility: Cabinet rails.Designed for: P/N: RKPW161915, 4POSTRACK25, 2POSTRACK, RK2236BKF, RK1219WALL, RK1219WALH, RK4242BKNS, RK4242BK, RK4236BKNS, RK4236BK, 4POSTRACkBK, CAB1019WALL, CABSERVPOSTS, 2636CABINET, 7236CABINET.Certifications & Standards: RoHS, Green compliant.Warranty: Lifetime limited.StarTech.com Cage nuts are used for mounting standard rack equipment into a server rack or cabinet and has stainless steel construction for added durability, sold as 50 per pack.

This 50-pack of M5 cage nuts is convenient to have on hand for installing rack-mountable equipment, such as your server, network or audio/video equipment. Each pack includes a cage nut installation tool to ensure a fast and simple installation of each cage nut. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases. The bulk pack is also suitable for new server rack and cabinet setups - perfect for those times when you drop or misplace a nut or two. The bulk package ensures that you have enough cage nuts available for all of your installations, when you need them. The server rack cage nuts come in an all-black finish for a seamless look..Dimensions: 0.4"H x 0.5"W x 0.5"D.Comes in black color and features steel construction for durability.Thread type: M5.RoHs Compliant.Weight: 0.4 lbs..Comes with 2 years warranty.Product Type: Cage nuts.Packaged Quantity: 50 (specifications are for single item).Color: Black.Product Material: Steel.Install your rack-mountable hardware securely with these high-quality cage nuts

The StarTech.com® CABSCRWM620 M6 rack screws and M6 cage nuts help in installing rack-mount hardware such as rack-mount hardware such as your server, network or audio/video equipment. Square cage nuts are suitable to use on racks and cabinets with square holes. These nickel-plated screws and nuts in silver color, are resistant to rust..Rack screws and cage nuts is convenient to have on hand for installing rack-mountable equipment, such as your server, network or audio/video equipment.Dimensions: 0.9"H x 0.2"W x 0.5"D.Color: Silver, Finish: Nickel-plated.Rust resistant.Square cage nut design for racks and cabinets with square holes.Includes 20 x M6 mounting screws, 20 x M6 cage nuts, one cage nut installation tool.RoHS and TAA compliant.Weight: 7.2 oz.Comes with lifetime warranty

The StarTech.com® CABSCRWM520 M5 rack mounting screws and M5 cage nuts help in installing rack-mount hardware such as rack-mount hardware such as your server, network or audio/video equipment. Square cage nuts are suitable to use on racks and cabinets with square holes. These nickel-plated screws and nuts in silver color, are resistant to rust. They come with cage nut installation tool..Rack screws and cage nuts is convenient to have on hand for installing rack-mountable equipment, such as your server, network or audio/video equipment.Color: Silver, Finish: Nickel-plated.Rust resistant.Square cage nut design for racks and cabinets with square holes.Includes 20 x M5 mounting screws, 20 x M5 cage nuts, one cage nut installation tool.RoHS and TAA compliant.Weight: 6.3 oz.Comes with lifetime warranty

The 4XEM M5 rack mounting screws and cage nuts pack is suitable for use with server racks/cabinets and assures that your gear is firmly installed in your storage cabinet and server rack. This pack contains 50 M5 stainless steel screws as well as nuts. It offers high performance, premium quality as well as durability..Stainless steel construction offers durability.Form factor: Rack-mountable.Suitable for use with APC NetShelter SX 42U/48U enclosures and PC.Necessary for installing server, network, AV and other rack mount equipment.M5 mounting screws and cage nuts ensures your gear is securely installed in your storage cabinet or server rack.Contains 50 screws and nuts.Comes with 3 years limited warranty.Silver

This screw is convenient to have on hand for installing server, network, AV and other rackmount equipment securely into your storage cabinet or server rack..Dimensions 0.2"(W) x 1 2"(L).Thread type M6.Fastener type 100 - rack screw.Material Stainless steel.Square cage nut design for racks and cabinets with square holes.Stainless steel construction ensures durability.Includes 100 pack of M6 nuts and screws.Startech.Com® CABSCREWM62 Mounting Screws and Cage Nuts have square cage nut design for racks and cabinets with square holes.

Startech.com® M6 Mounting screw and cage nut is made of stainless steel. Mounting screw and nut is convenient to have on hand for installing server, network, AV and other rack mount equipment securely into your storage cabinet or server rack..Length: 1/2".Quick shipping direct or from all major distributors and resellers.Stainless steel construction for durability.Square cage nut designed for racks and cabinets with square holes.Included: 1 - 50 pack of M6 cage nuts and cab screws.RoHS compliant.Lifetime limited warranty.Startech.com® M6 Mounting screw and cage nut is designed to mount telecom and A/V equipments server rack/cabinets with square holes.

This complete package of 50 stainless steel screws and 50 stainless steel nuts provides enough mounting hardware to setup almost any rack..Dimensions 0.2"(W) x 1 2"(L).Thread type M5.Fastener type 100 x (0.20" x 0.47") - rack screw.Material Stainless steel.Ideal to have on hand for installing servers, network equipment, AV equipment and other rack mountable devices securely into your storage cabinet or server rack.Square cage nut designed for racks and cabinets with square holes.Includes 100 pack of M5 cage nuts and screws.Warranty Lifetime limited.Startech.Com® CABSCREWM52 Mounting Screws and Cage Nuts is ideal to have on hand for installing servers, network equipment, AV equipment, and other rackmount devices securely into your storage cabinet.

This complete package of 50 stainless steel screws and 50 stainless steel nuts provides enough mounting hardware to setup almost any rack..Dimensions 0.2"(W) x 1 2"(L).Thread type M5.Fastener type 50 x (0.20" rack nut.Material Stainless steel.Ideal to have on hand for installing servers, network equipment, AV equipment and other rack mountable devices securely into your storage cabinet or server rack.Square cage nut designed for racks and cabinets with square holes.Includes 50 pack of M5 cage nuts and screws.Warranty Lifetime limited.Startech.Com® CABSCREWM5 Mounting Screws and Cage Nuts is ideal to have on hand for installing servers, network equipment, AV equipment, and other rackmount devices securely into your storage cabinet or server rack.

The StarTech CABSCREWM62B screws and cage nuts are great for installing rack-mountable equipment such as server, network or audio/video equipment. These black screws and cage nuts have steel construction for added durability, sold as 100 per pack..Screws and cage nuts is perfect to mount your standard rack-mountable equipment into a server rack or cabinet.Dimensions: 0.5"H x 0.2"W.Comes in black color and features steel construction for added protection as well as durability.Sold as 100 per pack.Thread type: M6.Features square cage nut design for racks and cabinets with square holes.Contains 100 x M6 screws and 100 x M6 cage nuts.RoHS Compliant.Weight: 8.1 oz..Comes with 2 years warranty

The StarTech CABSCREWM6B screws and cage nuts are great for installing rack-mountable equipment such as server, network or audio/video equipment. These black screws and cage nuts have steel construction for added durability, sold as 50 per pack..Screws and cage nuts is perfect to mount your standard rack-mountable equipment into a server rack or cabinet.Dimensions: 0.5"H x 0.2"W.Comes in black color and features steel construction for added protection as well as durability.Sold as 50 per pack.Thread type: M6.Features square cage nut design for racks and cabinets with square holes.Contains 50 x M6 screws and 50 x M6 cage nuts.RoHS Compliant.Weight: 8.1 oz..Comes with 2 years warranty

The StarTech.com CABSCREWM52B black steel M5 screw and cage nut offers convenient installation of your rack-mountable equipment like your server, network or audio/video equipment. This square screw and cage nut provides secure protection for your rack-mountable equipment, sold as 100/pack..Screws and cage nut is perfect for installing rack-mountable equipment, including server, network or audio/video equipment.Dimensions: 0.2"H x 0.5"W x 0.6"D.Comes in black color and features steel construction for durability.Thread type: M5.RoHs Compliant.Weight: 1.9 lbs..Comes with 2 years warranty.100/Pack.Install your rack-mountable hardware securely with these high-quality screws and nuts

This 100-pack of M5 mounting screws and cage nuts is convenient to have on hand for installing rack-mountable equipment, such as your server, network or audio/video equipment. Each pack includes a cage nut installation tool to ensure a fast and simple installation of each cage nut. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases. They are also suitable for new server rack and cabinet setups - perfect for those times when you drop or misplace a nut or two. The bulk package ensures that you have enough available for all of your installations, when you need them. Both the server rack screws and the nuts come in an all-black finish for a seamless look..Screws and cage nut is perfect for installing rack-mountable equipment, including server, network or audio/video equipment.Dimensions: 0.2"H x 0.5"W x 0.6"D.Comes in black color and features steel construction for durability.Thread type: M5.RoHs Compliant.Weight: 0.9 lbs..Comes with 2 years warranty.50/Pack.Install your rack-mountable hardware securely with these high-quality screws and nuts

6U 19" Wall Mount Network Rack 19" Deep 2 Post Open Frame for Server Room Data/AV/IT/Communication/Computer Equipment/Patch Panel w/Cage Nuts/Screws Hook/Loop - Cisco 2960 (RK619WALLO).ACCESSORIES INCLUDED: The wall mount server room/ computer/communication/AV/IT equipment rack includes 24 M6 screws & cage nuts & hook & loop to securely mount all of your equipment in the rack.EASY ASSEMBLY: The rack ships flat packed with ISTA-6 certified packaging to ensure complete and undamaged delivery and also features comprehensive assembly instructions.HEAVY DUTY: This heavy duty 2 post open frame rack supports unobstructed airflow & is easy to install with a durable design made from SPCC cold-rolled steel with support for up to 175lbs of equipment.LIFETIME WARRANTY: StarTech.com offers 24 hour technical support and has been the choice of IT professionals for 30 years, conducting thorough compatibility and performance testing on all our products.STURDY & CONVENIENT: 6U 19" Open Frame wall mount network rack with 19" mounting depth is EIA/ECA-310 compatible & supports like patch panels, shelves and unmanaged switches.2 Post Data Rack | EIA 310 Compliant | Steel | Black

9U 19" Wall Mount Network Rack 17" Deep 2 Post Open Frame for Server Room/Data/AV/IT/Communication/Computer Equipment/Patch Panel w/Cage Nuts/Screws Hook/Loop 175lb Capacity (RK919WALLO).ACCESSORIES INCLUDED: The wall mount server room/ computer/communication/AV/IT equipment rack includes 24 M6 screws & cage nuts & hook & loop to securely mount all of your equipment in the rack.EASY ASSEMBLY: The rack ships flat packed with ISTA-6 certified packaging to ensure complete and undamaged delivery and also features comprehensive assembly instructions.HEAVY DUTY: This heavy duty 2 post open frame rack supports unobstructed airflow & is easy to install with a durable design made from SPCC cold-rolled steel with support for up to 175lbs of equipment.LIFETIME WARRANTY: StarTech.com offers 24 hour technical support and has been the choice of IT professionals for 30 years, conducting thorough compatibility and performance testing on all our products.STURDY & CONVENIENT: 9U 19" Open Frame wall mount network rack with 17" mounting depth is EIA/ECA-310 compatible & supports patch panels, shelves, and unmanaged switches.2 Post Data Rack | EIA 310 Compliant | Steel | Black

50 Pack 10-32 Server Rack Cage Nuts and Screws w/Washers - Rack Mount Hardware Kit - Network/IT Equipment Cabinet Clip/Captive Nuts & Bolts for Square Holes - Black - TAA (CABSCREW1032).COMPLIANT WITH INDUSTRY STANDARDS: Clip/Captive nuts & bolts are easy to install and are compatible with virtually any rack & equipment, including HPE, Dell, APC & more.PROFESSIONAL HIGH QUALITY DESIGN: Rack mount hardware kit made from high-quality steel and finished in matte black; includes pre-installed washers to help prevent damage to valuable racks & equipment.STARTECH.COM ADVANTAGE: IT professionals choice for over 30 years; these cage nuts & screws for square holes are backed for 5 yrs. by StarTech.com, including free 24/5 North America based tech support.TAA COMPLIANT 10-32 CAGE NUTS & SCREWS: 50 pack of server rack cage nuts and screws uses 10-32 threads (imperial measurements) and comes with an installation tool.TECH SPECS: 50x Cage Nuts | 50x Screws | 10-32 Thread | Steel | Matte Black Finish | Cage Nut Installation Tool Included.Rack Mount Cage Nuts and Screws | 10-32 | Black

This cabinet is designed to integrate wall-mounting, easy equipment access, and cable management in IT network applications with limited floor space. It has a sturdy wall-mount bracket that allows the cabinet to quickly be hung on the wall..Black.Designed to integrate wall-mounting, easy equipment access, and cable management in IT network applications with limited floor space.19.9"H x 23.6"W x 17.8"D.Form Factor: 19" 9U Wall Mounted.35 lbs..Adjustable mounting depths up to 17".Ventilated front door and side panels for increased airflow.Designed for IT and education environments where equipment needs to be secure and out of the way.Includes SRW9U wall mount rack enclosure, 18 x M6 screws, 18 x M6 cage nuts, 18 x M6 washers, 2 x keys, owner manual.Certifications EIA-310-E, Tested to NOM (Mexico), RoHs.Warranty Lifetime limited.Tripp Lite SRW9U Wall-Mount Rack Enclosure Cabinet comes with ventilated front door and a side panel that allows generous airflow to keep the equipment operates safely.

Organize network and power cables on a 19" rack or cabinet with this StarTech 1U horizontal cable lacing bar with variable depth. Organize cables and reduce cable and connector strain by mounting this lacing bar between rack-mounted patch panels, servers, and NAS devices. Tether cables to the cable management bar using cable ties or hook-and-loop fasteners to enhance the airflow to mission-critical equipment..Organize network and power cables on a 19" rack or cabinet with this 1U horizontal cable lacing bar with variable depth.Can be installed inwards or outwards relative to the rack mounting posts for optimal cable routing, reduced clutter, and improved airflow.Dimensions: 1.7"H x 19"W x 3.8"D.Box contains: lacing shelf, four M6 screws, four M6 cage nuts, four M6 plastic washers, four M4 screws, quick start guide.Horizontal cable lacing crossbar allows for variable depth of the horizontal bar relative to the rack mounting posts (depth adjustable from 1.5" to 3.7"; fixed side bracket depth of 3.78").Use with patch panels, servers, switches, NASs, PDUs, KVMs, and more.Eliminate sharp cable bends at connector ends and alleviate port/connector stress by securing the cables.Features lacing points spaced 0.3" along the cable guide bar.SPCC steel construction allows the cable support bar to bear the load of all cable/cable bundle types.Powder-coated black finish for long-term durability.2-year manufacturer limited warranty

The open rack features an adjustable depth ranging from 12-20 inches to accommodate larger data, network, and telecommunications devices. With a maximum depth of 20 inches, this rack allows for mounting of shelves and other accessories with enough clearance at the back for cable management. The open-frame design help to keep your equipment cool and easily accessible from different angles. The wall mounting holes are positioned 12 and 16 inches apart (center to center) providing a convenient and effecting anchoring, making it suitable for mounting on virtually any wall surface or construction framework. This 24U rack includes M6 square cage nuts and M6 screws to save you the hassle of sourcing separate mounting hardware for your equipment. This rack can be mounted to the wall in a server room, data closet, or office expanding your valuable floor space..2-Post 24U open frame network rack with 12-20in (30.5-50.8cm) adjustable depth for AV, IT computer, switches, patch panels, and PDUs.Durable 19" data server rack features vertical rails made of 2.0mm SPCC cold-rolled steel; Unobstructed airflow to help keep your equipment cool.Efficient flat pack shipping and hassle-free installation; Easy install with access to all sides.M6 square cage nuts, M6 screws and plastic washers included.EIA/ECA-310 compliant.Weight capacity 200lbs/90kg.Mount The RACK-24U-20-WALL-OA 24U Open Frame Wall Mount Equipment Rack with Adjustable Depth is a high-quality, sturdy relay rack solution that is easy to assemble and install into any environment.

Innovation® First 1U rack mount rails have support flange which is 23 1/2" long is used for supporting the equipment kept in the rack. Rails support both center and flush mount installations and Velcro straps provided for securing cables..Compatibility: Servers, storage, computers.Material: 0.049" steel with a durable zinc plating.Support both center and flush mount installations.Rack rails support flange is 23 1/2" (597mm) long.Rack rails minimum equipment width: 6 1/4".Maximum equipment width: 17 5/8".Equipment mounting: Rack rails standard thumb screw threads (10-32, 12-24, and metric m6), compatible with APC, CPI, chatsworth, bud and most other racks.Velcro straps provided for securing cables.Mounting depth range is 0" to 18" deep.Includes 1u rack mount rails, cabling crossbar, relay racks, screws, cage-nuts, nuts.Certifications and standards: EIA-310.Innovation® First 1U rack mount rails allows racking of equipment that was never designed to be rack mounted and is compatible for servers, computers.

The RACK-10U-14-BRACKET 10U 13.78 in. Deep Wall Mounting Bracket for Patch Panel delivers a sturdy and dependable equipment storage option, allowing you to wallmount equipment for a more efficient and accessible operating environment. The mounting bracket features an all-steel design and is suitable for mounting patch panels, or other slim 19in equipment to a wall..StarTech.com 10U Wall Mount Network Rack, 14 in Deep (Low Profile), 19" Patch Panel Bracket for Shallow Server.This 19 inch wide low profile wall mounted rack has a maximum mounting depth of 14 in [35 cm]..The 10U wall mounting patch panel bracket ships fully assembled and comes complete with M6 Screws and M6 Cage Nuts.The wall mounting data rack features a solid steel design for ultimate durability and to ensure a safe and sturdy mounting solution.Built with efficiency in mind, the small wall mount patch panel bracket has rear cable routing access for easy cable organization in your network closet, server room.Color come Black.Material Alloy Steel

The Tripp Lite SmartRack 24U rack enclosure server cabinet with adjustable front as well as rear vertical rackmount rails features extended depth of 33" that allow for standard server installation. It comes with locking, reversible front door and locking, removable side panels for added ease and safety. This server cabinet has top as well as bottom panel cable access openings and comes fully assembled for easy installation. It comes with casters as well as leveling feet for easy movement..Color: Black, Form factor: Floor standing, 24U rack.Suitable for use with server.Dimensions: 45.6"H x 23.6"W x 33.5"D.Dynamic/rolling weight capacity: 1000 lbs..Has front and back door frames grounding lug.Offers adjustable mounting depths from 3" to 32.5".Features: Locking, reversible front door, locking, removable side panels, casters and leveling feet.Top and bottom panel cable access openings for convenience, fully assembled for quick installation.Contains 50 x M6 screws, 50 x M6 cage nuts, 50 x M6 washers, four casters, four levelers, two keys and owner's manual.Meets RoHS, Green, EIA-310-E, UL60950 certifications & standards.Weight: 55.79 Kg.Comes with 5 years limited warranty

The Innovation First 2UKIT-109 2U rack mount rail with steel construction, has maximum load capacity of up to 75 lb. This rack rail installs into racks with square, round or threaded holes. It comes with cabling crossbar, four post racks, screws, cage-nuts and nuts..Compatible with Servers, storage, computers.Fits square, round, threaded holes.Rail OEM: All purpose, server compatibility: Apple, Dell, HP and IBM.Rack type: Mounts in any type of 4 post rack, hole type: Compatible with the industry standard 0.375" square hole racks, cage nuts included.Rack height: 2U, rack width: 19", rail type: Fixed, equipment width: 16.375" - 17.4".Equipment depth: The rack rails support flange is 23.5" long, the rack rail will support servers computers or equipment up to 35" deep.Overall installation depth: Maximum overall depth is same as the rack's mounting depth, cable management: Cabling crossbar is standard.Mounting depth: 10" - 31.75".Includes 2U rack mount rails, cabling crossbar, 4 post racks, screws, cage-nuts, nuts.EIA-310 certified.Certifications and standards: EIA-310.Innovation® First 2U rack mount rails allows racking of equipment that was never designed to be rack mounted and is compatible for servers, computers.

This StarTech 1U Universal fit mount shelf is designed to fit any 19" wide rack..19" 1U.Heavy duty steel construction.Supports a total weight of 33lbs/15kg.Mounting screws included.Mounting options Front mount (front only).Material Steel.Very compact form factor makes it ideal for any wall mount server rack, and even network switching racks.Universal 19" rack design makes it simple to add a storage shelf to almost any rack or cabinet.Durable steel construction holds up to even the harshest industrial environments.Supply additional storage space for mission critical hardware and non-rack mount equipment.Rack unit 1U height.Includes 1U fixed rack shelf, 4 x M6 screws, 4 x M6 cage nuts.Certifications and standards CE, RoHs, UL.Warranty 3 years limited.Startech.Com® CABSHELF1U Universal Fixed Server Rack Cabinet Shelf has very compact form factor that makes it ideal for any wall-mount server rack, and even network switching racks.

This enclosure comes with NO doors and NO side panels. The 'EXP' version is an expansion model used when several cabinets are bade together..Dimensions 78 1 2"(H) x 23.63"(W) x 43"(L).Weight capacity Up to 3000 lbs. stationary, 2250 lbs. rolling.Preinstalled casters and leveling feet.Black.Convenient grounding system.Rolls through standard 7 foot doorway.Compatible with hot-aisle cold-aisle configurations.Textured powder coat finish for tough resistance to environmental concerns such as deployment in warehouses.Rack unit 42U; Rack size 4" - 37".Includes 50 pieces of M6 cage nuts and 50 pieces of M6 screws (equipment mounting hardware).Certifications RoHs, UL 60950, CE, Tested to NOM (Mexico), EIA ECA-310-E, IEC 60297-3-100, DIN 41494.Warranty 2 years limited.Tripp Lite SR42UBEXPND 4-Post Open Frame Rack Cabinet has 4 interior vertical posts with unthreaded square hole openings.

The CABSHELF22V 2U 22" Vented Rack Mount Shelf lets you add a compact, 2U shelf to virtually any standard 19-inch server rack or cabinet with front mount options. Our vented rack shelves improve air flow and help to lower temperatures in the rack. Constructed using SPCC commercial grade cold-rolled steel, this durable fixed rack shelf can hold up to 22kg (50lbs) of equipment - a perfect solution for storing small, non-rackmount equipment, tools, peripherals or accessories in your rack to keep them readily accessible..Fits all standard 19" server racks.Weight capacity 50 lbs..2U Vented rackmount shelf.Durable steel construction holds up to even the harshest industrial environments. Black color..Front mount only.Supply additional storage space for mission critical hardware and non-rack mount equipment.Includes 2U 22in depth rack shelf, 4 x M6 screws, 4 x M6 cage nuts, instruction manual.Certifications and standards CE, RoHs.Backed by a StarTech.com Lifetime warranty..Durable steel construction holds up to even the harshest industrial environments.Enclosure thickness 0.1".Rack unit 2U height.Includes 2U 22in depth rack shelf, 4 x M6 screws, 4 x M6 cage nuts, instruction manual.Certifications and standards CE, RoHs.Warranty Lifetime limited.Startech 22" Server Rack Cabinet Shelf improves airflow and helps lower temperatures in the cabinet.

Rack Solutions Slide Rails is compatible with Dell PowerEdge servers from generations 11-15, including models like R7515, R720XD, R820, and more. These dry slide rails are engineered for easy serviceability, allowing smooth extension of equipment without the need for an OEM rail kit. Compatible with both 2-post and 4-post racks, the rails feature adjustable mounting depths of 12" to 32" for 4-post racks and 3" to 6" for 2-post racks. Ideal for threaded, round, or square holes, this rail kit offers a robust, long-lasting solution for managing your Dell servers in any standard EIA-310 rack..Zinc plated dry slide rail kit.4-Post and 2-post 19" EIA 310 standard server racks. Compatible with the industry standard 3/8" (10 mm) square hole racks.Fixed rails compatible with 2U Dell PowerEdge servers from generations 11-15.Cage nuts included for square hole mounting compatible with all standard round (non threaded) holes &h all standard threads including 10 32, 12 24 and metric M6.Adjustable mounting depth of 12" to 32" for 4-post racks and 3" to 6" for center mount 2-post racks.Fits square, round, threaded holes.Fits square, round, and threaded hole racks, supporting L, C, and Z rack upright shapes.Front mounting flange of the rail kit engages the Dell slam latch.Assorted hardware included, Phillips head screwdriver required

Product Type: Rack.Package Content: 42 cage nuts, 42 screws.Color: Black.Rack Size: 19".Height (Rack Units): 18U.Dimensions (WxDxH): 36.1 in x 24.8 in x 35.9 in.Weight: 119.93 lbs.Features: Wall mountable, removable side panel, integrated cable m

The centered rack shelf can hold up to 200 lbs. (91 kg) of equipment and is constructed using 1/16 in (1.5 mm) thick SPCC commercial-grade cold-rolled steel for long-term durability and sturdiness. Accommodate your accessories or non-mountable devices for ease of access or connectivity to your equipment. Conveniently includes M6 square cage nuts and M6 screws to set it up in no time. The SHELF-2U-20-CENTER-V is backed by a StarTech.com lifetime warranty and free lifetime technical support..UNIVERSAL 19'' FIT: This 2U center-mounted vented server rack shelf is designed to fit 2-post EIA-310 compliant 19 in server racks and can accommodate an internal depth of 20in (50.8 cm) for your data, IT, networking, or other non-rack mountable equipment.CENTER MOUNT SHELF: The center-mount design allows for easy access to the front and back of the equipment, allowing for simple installation, maintenance and cable routing.DURABLE DESIGN: Constructed with 1/16 in (1.5 mm) thick SPCC commercial cold-rolled steel, the sturdy rack shelf ensures long term durability and supports a total weight of 200 lbs. (91 kg) making it the perfect rack shelf for any environment.MAXIMIZE VENTILATION: The vented shelf plate on the cantilever rack shelf helps to improve airflow to effectively dissipate heat away from your equipment.STARTECH.COM ADVANTAGE: IT professionals’ choice for over 30 years, this 2U vented server rack shelf is backed for life by StarTech.com, including free lifetime 24/5 multi-lingual technical assistance.The SHELF-2U-20-CENTER-V lets you add 2U 20 inches (50.8 cm) deep shelf to any 2-post EIA-310 compliant 19-inch rack.

The Tripp Lite SmartRack low-profile UPS-depth rack enclosure cabinet with 200 lbs load capacity, stores and organizes 12U of 19" rack equipment up to 24.5" deep in locations with limited floor space. It has clear acrylic window that lets you monitor equipment without unlocking the door. Vented panels promote ample airflow that keeps equipment cool. Cabinet has convenient ports with removable covers to facilitate cable routing through top and bottom. It is suitable for network for network wiring closets, retail locations, classrooms and back offices. Cabinet with hinged back swings away from the wall to allow convenient back-door access to equipment and cabling. This wall mountable cabinet avoids equipment tampering and minimizes acoustic noise..Rack height: 12U.Weight capacity: 200 lbs..Dimensions: 25.06"H x 23.63"W x 25.5"D.Device depth: 3" - 24.5".Perfect for network wiring closets, retail locations, classrooms, back offices & other areas with limited floor space where equipment need to secure.Shatter-resistant clear acrylic front window prevents equipment tampering while minimizing acoustic noise and provides extra visual flair.Side panels and front door lock securely to prevent damage and tampering or theft.Vented panels allow generous airflow that keeps equipment cool.Rotate cabinet 180 deg before mounting to open reversible doors left or right.Hinged cabinet for convenient access swings away from the wall to allow easy back-door access to equipment and cabling during installation.Wall-mounting holes spaced 16" apart to accommodate standard wall stud placement.Rails support square-hole or threaded-hole mounting.Rack spaces numbered for easy reference.Contains 20 x M6 screws, 20 x M6 cage nuts, 20 x M6 washers, 20 x 12-24 screws, two keys and owner's manual.Meets EIA-310-D, IEC 60297-3-100, IP20 Protection, RoHS certifications and standards.Weight: 64 lbs..Comes with 5 years limited warranty

The StarTech.com UNIRAILS2U 19" 2U fixed adjustable depth universal server rack rail accommodates non-rack mountable equipment and has weight capacity up to 45 kg. Featuring sturdy steel construction with three-piece rail construction, it accommodates almost all sizes of rack. This fixed adjustable depth universal server rack rail secures equipment with multiple mounting hole patterns and removable rear cable management panel..Server mounting rail accommodates non-rack mountable equipment at capacities up to 100 lbs. into standard 19" racks.Dimensions: 3.5"H x 18.3"W x 18.9"D external, 16.5" - 41.5" mounting depth.Comes in black color and features steel construction for durability.Mounting height: 2U.Features removable rear cable management panel.Multiple mounting hole patterns secures equipment.Three-piece rail construction provides a broad range of adjustable depth configurations to accommodate almost any size of rack.Has two sturdy cross-bars spanning center of rails for equipment that does not reach the opposing rail lip.Contains one set universal rack rails, 16 x M5 panel screws, 16 x M5 cage nuts and one M5 wrench.Meets RoHs, CE, UL certification and standards.Weight: 8.3 lbs..Comes with lifetime warranty

Innovation Universal rack rail is designed to replace OEM rails included with apple, HP, IBM and dell server racks. Rack rail has mounting depth range of 10" - 31 3/4" and can withstand a maximum weight of 20.4 Kg..Capacity: 20.4 kg.Compatibility: Servers, storage, computers.Hole type: Compatible with the industry standard 3/8"(10 mm) square hole racks, cage nuts included for square hole mounting, compatible with all standard round (non-threaded) holes.Rack type: 4Post, 2Post.Rail type: Fixed.Mounting depth range: 10" - 31 3/4"(254 - 806 mm).Cable management: Cabling crossbar is standard.Height (rack units): 1U.Overall installation depth: Maximum overall depth is the same as the rack's mounting depth.LIFETIME Limited Warranty - Includes LIFETIME Next Business Day (NBD) Replacement, LIFETIME Technical Chat online support, and 90 days free Technical Phone support.Innovation Universal rack rail is designed to support variety of server racks and is compatible with servers, storage and computers.

The Tripp Lite SR24UBFFD SmartRack 24U standard-depth rack enclosure cabinet is perfect for factories, power stations, water treatment plants, construction areas, shipping facilities, warehouses, transport hubs and other working environments high in moisture, dust and debris. Cabinet measuring 46.8" x 23.6" x 38.5", has durable steel construction for longer endurance. It has eight high-performance fans built into front door for ensuring maximum airflow through enclosure. Cabinet with 1000 lbs weight capacity, accommodates standard 19" rack equipment in 24U of space. It has louvered front door for blocking drips, splashes and falling debris from entering enclosure, while the built-in dust filters keep out airborne contaminants away..Rack enclosure cabinet featuring high-quality constructions, withstands harsh environments.Dimensions: 46.8" x 23.6" x 38.5", Cord length: 6'.Color: Black, Material: Steel.Maximum weight capacity: 1000 lbs..Static/stationary weight capacity: 1000 lbs..Rack height: 24U.Grounding lug: Front and back door frames.Input voltage: 120 V, 50/60 Hz, Input plug type: NEMA 5-15P.Perfect for factories, power stations, water treatment plants, construction areas, shipping facilities, warehouses and transport hubs.The 8 high-performance fans built into front door pull air through enclosure/cool equipment while built-in dust filters keep out airborne contaminants.Filters can be removed as well replaced with standard 20" x 24" x 1" furnace filters and fans powered by detachable 10' AC cord with NEMA 5-15P plug.Reversible doors and removable side panels lock tight while convenient ports with removable covers allow cable routing through top and bottom.Front as well rear mounting rails accommodate equipment from 3" - 32.5" deep while rails support square-hole mounting.Removable casters and levelers help with minor position adjustments as well stabilization and comes with mounting hardware.Meets EIA-310-E, IEC 60297-3-100, IP54, RoHS certifications and standards.Contains SR24UBFFD SmartRack 24U standard-depth rack enclosure cabinet, 50 x M6 cage nuts, 50 x M6 screws, 50 x cup washers, four casters.Weight: 209.43 lbs..Comes with 2 years limited warranty

Wall-mount cabinet secures and organizes 12U of 19-inch rack equipment in network closets, classrooms and other locations with limited floor space. Houses network switches and patch panels up to 20.5 inches deep..Maximum load capacity of 200 lbs (90.7 kgs).Swings away from wall on hinge for easy back-door access.Locking steel cabinet vented at sides, front, top and bottom.Flow-through ventilation keeps equipment cool.Secures 12U of 19 in. rack equipment up to 20.5 in. deep.Perfect for network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way.Rack Depth: Shallow.Number of Vertical Mounting Rails: 4.Houses EIA-standard 19 in. rack equipment in 12U of space.Rotate cabinet 180° before mounting to open reversible doors left or right.Ships fully assembled for quick installation.Provides physical equipment and media security required for PCI DSS (Payment Card Industry Data Security Standard) compliance.Vertical mounting rails adjust in 7/8 in. increments to accommodate equipment up to 20.5 in. deep, such as network switches and patch panels.Wall-mounting holes spaced 16 in. apart for standard wall stud placement.Package Includes:SRW12US SmartRack 12U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet,(20) M6 screws,(20) M6 cage nuts,(20) M6 washers,(20) 12-24 screws,(2) Keys,Owner’s manual.Product Compliance: RoHS; EIA/ECA-310-E; UKCA.5-year limited warranty.Tripp Lite 12U Wall Mount Rack Enclosure Server Cabinet Hinged Wall mount - 19" 12U , Wall Mounted

The Tripp Lite SRW15US SmartRack 15U Low Profile Switch Depth Wallmount Rack Enclosure Cabinet is designed to house EIA-standard 19 in. rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 lbs. The cabinet swings away from the wall on a sturdy hinge, allowing easy backdoor access to equipment and cabling during installation and maintenance. The doors and side panels lock securely to help prevent damage, tampering or theft. The front, top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible doors can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing. The SRW15US comes fully assembled and ready to mount to the wall, or use Tripp Lite’s optional SRCASTER rolling caster kit to make it a mobile rack..Ideal for network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space.Secures 15U of 19 in. rack equipment up to 20.5 in. deep.Maximum load capacity of 200 lbs..Swings away from wall on hinge for easy, backdoor access to equipment and cabling during installation and maintenance.Cabinet should be rotated 180° before mounting to open reversible doors left or right.Locking steel cabinet vented at sides, front, top and bottom.Flow-through ventilation keeps equipment cool.Convenient ports with removable covers allow cable routing through top and bottom.Wall-mounting holes spaced 16 in. apart for standard wall stud placement.Vertical mounting rails adjust in 7/8 in. increments to accommodate equipment up to 20.5 in. deep, such as network switches and patch panels.Rails support square hole or 12-24 threaded-hole mounting.Rack spaces numbered for easy reference.Can be converted to a roll rack with optional SRCASTER (sold separately).Meets Payment Card Industry Standards.Ships fully assembled.5-year limited warranty.Includes 20 M6 screws, 20 M6 cage nuts, 20 M6 washers, 20 12-24 screws and 2 keys

The Tripp Lite SR16SHELF 19-inch black 3U rack-mount configurable storage shelf with 15 adjustable and removable plastic dividers accommodates 16 electronic devices. Use it to store your laptops and other similar devices in a wall-mount or floor rack enclosure. It is compatible with all EIA-compliant 19-inch wall-mount and floor rack enclosures and features non-scuff paint to avoid scratches. This easily mountable storage shelf features cable ports with rubber grommets to hold charging cables in place and prevent clutter or tangles..Storage shelf firmly stores up to 16 personal electronic devices in wall-mount or floor rack enclosure.Dimensions: 4.9"H x 18.9"W x 15.8"D, 3U H x 19"W rack.Comes in black color.Perfect for storing tablets, laptops, Chromebooks, Ultrabooks, MacBook Airs and other similar devices.Dividers can easily adjusted to fit devices.Non-scuff paint prevents scratches.Cable ports with rubber grommets holds charging cables securely in place and prevents clutter as well as tangles.Contains 15 x plastic dividers, 8 x M6 screws, 8 x M6 cage nuts, 8 x M6 cup washers and owner's manual.RoHs Compliant.Weight: 11.9 lbs..Comes with 2 years limited warranty

The Tripp Lite SRW12US33G SmartRack 12U wall-mount rack enclosure cabinet in black, is perfect for network closets, retail locations, classrooms and other areas with limited floor space where you need equipment to be secure or ganized and out of the way. This cabinet measuring 25" x 23.63" x 33.5", has durable steel/acrylic construction for longer endurance. Cabinet with 250 lbs weight capacity, has extra-deep capacity to accommodate most 1U servers, UPS systems, battery packs and switches. This cabinet swings away from the wall to offer easy access to equipment and cabling during installation/maintenance. It comes with two keys, 36 M6 screws, 36 M6 cage nuts, 36 M6 washers and 36 12-24 screws for added convenience..Wall-mount rack enclosure cabinet featuring high-quality constructions, withstands harsh environments.Dimensions: 25" x 23.63" x 33.5".Color: Black, Material: Steel, acrylic.Maximum weight capacity: 250 lbs..Static/stationary weight capacity: 250 lbs..Rack height: 12U.Grounding lug: Front and back door frames.Perfect for network closets, retail locations, classrooms and other areas with limited floor space where you need equipment to be secure or ganized.Swings away from the wall to allow easy access to equipment and cabling during installation and maintenance.Allows you monitor equipment without unlocking the enclosure while preventing equipment tampering and reducing acoustic noise.Vented panels allow generous airflow that keeps equipment cool while convenient ports with removable covers allow cable routing.Vertical mounting rails adjust in 0.875" increments to house equipment up to 32.5" deep while wall-mounting holes spaced 16" apart.Rails support square-hole or threaded-hole mounting while rack spaces numbered for easy reference.Meets EIA-310-D, IEC 60297-3-100, IP250, RoHS certifications and standards.Contains SRW12US33G SmartRack 12U server-depth wall-mount rack enclosure cabinet, 36 x M6 screws, 36 x M6 cage nuts, 36 x M6 washers.Weight: 94.5 lbs..Comes with 5 years limited warranty

The Tripp Lite SmartRack black rack enclosure server cabinet features locking, removable, reversible front and rear doors for easy closing/opening. It has textured powder coat finish for added environmental protection. This cabinet comes with preinstalled casters for easy movement and leveling feet for positioning. The built in baying tabs in this cabinet, allow enclosures to combine securely in rows. It works with airflow optimization accessories and cable management accessories..Rack enclosure server cabinet is compatible with airflow optimization accessories as well as cable management accessories.Meets UL60950, RoHS, CE, tested to NOM (Mexico) and EIA/ECA-310-E certifications and standards.Dimensions: 226.06 cm H x 60.02 cm W x 109.22 cm D, Depth: 10.16 cm - 94 cm.Built in baying tabs allow enclosures to be combined securely in rows.Comes in black color.Rack height: 48 U spaces, Weight capacity: 1360.8 Kg (stationary), 1020.6 Kg (rolling), Factory preset rack depth: 70.49 cm.Enclosure includes mounting hardware of 50 pieces of M6 cage nuts and 50 pieces of M6 screws.Tool less accessory mounting rails (2 rails per enclosure) include slots for quick installation of compatible PDUs and vertical cable managers.Each rail accommodates two vertical PDUs or cable managers side-by-side (four items per enclosure).Easy-view depth index ensures consistent rail placement without requiring time-consuming measurements.65+ Percent open space in door perforation pattern meets or exceeds server manufacturer requirements.Split rear door design minimizes clearance requirements for service entry allowing the enclosure to place closer to a wall.Locking removable side panels are 'half size' to make them smaller and lighter improving ease of installation and servicing.Includes smart rack enclosure, four side panels, four side panel locks, two door & side panel keys, 50 x M6 screws, 50 x M6 cage nuts & owner's manual.Weight: 309 lbs..Comes with 5 years limited warranty

StarTech.com® 2U Horizontal finger duct rack cable management panel in black color mounts to a standard 19" 2 or 4-post rack to organize horizontal cabling, through a covered cable duct. Features a removable top cover that holds it easy to add or remove bundled cables quickly. Helps to increase the longevity of server and networking equipment interfaces by providing cable strain relief. Includes one horizontal cable duct, four M5x15 screws, M5 cage nuts, M6x15 screws and M6 cage nuts..Cable management panel is perfect to organize horizontal cabling, through a covered cable duct.Comes in black color for new look and is made of sturdy steel for durability.Measures 3.5"H x 19"W x 3.1"D.Features front mounting for easy installation.Utilizes 1U rack height for designating the usable space.Includes removable top cover that helps for easy adding or removal of bundled cables quickly.Provides a series of fingers on either side, as well as pass-through holes at the back to helps to route cables.Offers better solution for your server room or wiring closet.Used to mount standard 19" 2 or 4-post server racks.Use the fingers on either side or the rear pass - through holes to detache and route cables easily.Maximize the longevity of server and networking equipment interfaces by offering cable strain relief.Contains horizontal cable duct, 4 x M5x15 screws, 4 x M5 cage nuts, 4 - M6x15 screws, 4 x M6 cage nuts fro reliable operation.Meets RoHS Compliant and is CE listed.Weighs up to 33.7 oz.Comes with 2 years warranty.StarTech.com® 2U Horizontal finger duct rack cable management panel in black color is made of high-quality steel for durability. Comes with 2 sets of rack screws.

Tripp Lite SMARTRACK™ 12U Rack enclosure cabinet is designed to remove warm air from the enclosure and draw in cool air by convection. Cabinet provides safe, secure installation for all equipment with its locking, reversible front door..Style: Floor standing.Dimensions: 33.5"(H) x 25"(W) x 23.6"(D).black.12U (H) x 19"(W) rack.Maximum weight capacity: 63.50 kg.Adjustable mounting depths from 3" to 33" inches.Top and bottom panel cable access openings, preinstalled casters and levelling feet.Locking, reversible front door.Locking, removable side panels.Casters and levelling feet.Includes rack enclosure, (36) m6 screws, (36) m6 cage nuts, (36) m6 washers, sracaster kit, (2) keys, owner's manual.Certifications and standards: EIA-310-E.Weight: 105 lbs..Warranty: 5 years.Tripp Lite SMARTRACK™ 12U Rack enclosure cabinet has adjustable vertical mounting rails which accommodate equipment depths from 3" - 33" and features leveling feet.

4U 19" Desktop Open Frame Rack - 2 Post Free-Standing Network Rack Switch Depth for Patch Panel/Data/AV/IT/Communication/Studio/Computer Equipment 66lb Capacity w/Cage Nuts/Screws (RK4OD).2-POST 4U DESKTOP OPEN FRAME RACK: Ideal for use on a workbench or in the back room of small office spaces without dedicated wiring closets; offers easy access to IT equipment like switches or routers.DESIGNED FOR EASY ACCESS: Small size & 4U height of the free standing network rack is ideal for testing environments where easy front & rear access to equipment & frequent device changes are required.EASY TO SHIP & SET UP: Quick and easy assembly combined w/5.4lb (2.5 kg) shipping weight makes the AV/studio switch depth rack ideal for remote sites; ships w/cage nuts & screws for mounting equipment.LIFETIME WARRANTY: StarTech.com offers 24 hour technical support and has been the choice of IT professionals for 30 years, conducting thorough compatibility and performance testing on all our products.TECH SPECS: 4U Open Frame Rack| 19" Wide | 2 Post | EIA/ECA-310-E Compliant | U Heights Marked | 66.3lb (30 kg) Capacity | M5 Cage nuts & screws incl. | TAA Compliant.Free Standing Network Rack | EIA-310 | Weight Cap. 66 lbs. | Lifetime Warranty

Tripp Lite 18U extra depth rack enclosure cabinet is compatible with all standard 19" rack equipment. Cabinet has top and bottom panels which are furnished with vents that remove warm air from enclosure and draw in cool air by convection..18U with adjustable front and rear vertical rackmount rails.Extended depth of 33" allow for standard server installation.Dynamic/rolling weight capacity: 500 lbs., static/stationary weight capacity: 500.00 lbs..Dimensions: 35.6"(H) x 23.6"(W) x 33 1/2"(D).Rack height: 18U, rack width: 19".Locking, reversible front door and locking, removable side panels, fully assembled for quick installation, casters and leveling feet.Meets all enclosure requirements towards PCI DSS (Payment Card Industry Data Security Standard) compliance.Front rail.Package contents: SmartRack 18U extra depth rack enclosure cabinet, 42 x M6 screws, 42 x M6 cage nuts, 42 x M6 washers, 4 x casters, 4 x levelers, 2 x keys, owner's manual.Certification and standards: RoHS, green compliant.Weight: 105 lbs..Warranty: 5 years limited.Tripp Lite 18U extra depth rack enclosure cabinet supports of up to 500 lbs of equipment with included installation hardware and features front and rear pairs of vertical rails with square mounting holes.

The 2U 14" deep wall mounting bracket for patch panels delivers a sturdy and dependable equipment storage option, allowing you to wall mount data/IT equipment for a more efficient and accessible operating environment. It's the perfect solution for areas where space is at a premium like SoHo (small office, home office) environment, or space limited server room because it doesn't take any floor space. The mounting bracket features an all-steel design and is suitable for mounting patch panels, or other slim 19in equipment to a wall, and to organize cabling or equipment in your network closet, wiring closet, back office, or IDF. The sturdy steel construction is especially helpful for durability and stability. Also, because The open frame wall rack's mounting holes are positioned 16in. apart, allowing you a simple and secure wall-stud anchoring to your existing construction framework. M6 square cage nuts and M6 screws are included with the wall-mount bracket, additionally, M5x25 mounting screws are included to save you the hassle of sourcing separate mounting hardware. The RACK-2U-14-BRACKET is backed by a StarTech.com lifetime warranty and free lifetime technical support..2U WALL MOUNT RACK: This 19-inch wide low profile wall mounted rack has a maximum mounting depth of 14 in (35 cm), recommended for networking equipment up to 12 in deep, leaving 2 in for cable routing; Maximum weight capacity of 77 lbs. (35 kg).EASY TO INSTALL: The 2U wall-mounting patch panel bracket ships fully assembled and comes complete with M6 screws and M6 square cage nuts for easier equipment installation & includes wall mounting hardware; Predrilled wall mounting holes spaced 16" apart.COLD-ROLLED STEEL CONSTRUCTION: The wall mounting rack features a 1/16 in (1.5 mm) thick solid steel design for ultimate durability and to ensure a safe and sturdy mounting solution.EASY CABLE MANAGEMENT: Built with efficiency in mind, the small wall mount patch panel bracket has rear cable opening slot for in-wall cable routing in your network closet, server room, wiring closet, classroom.Durable wall mount rack made of cold rolled steel.STARTECH.COM ADVANTAGE: IT professionals choice for over 30 years; This 2U wall mount rack backed for life by StarTech.com, including free 24/5 North America based multi-lingual tech support.Mount equipment that is up to 14 inches deep, such as patch panels or network switches, to your wall

The Tripp Lite SmartRack 6U low-profile switch-depth-plus wall-mount rack enclosure cabinet in black, is perfect for use in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space. Cabinet measuring 14.6" x 23.6" x 21.7", has durable steel construction for longer endurance. This enclosure cabinet has a maximum weight capacity of 200 lbs and static/stationary weight capacity of 90.70 lbs. It has wall-mounting holes spaced 16" apart for easy and standard wall stud placement. It comes with 12 M6 screws, 12 M6 cage nuts, 12 M6 cup washers, 12 12-24 screws, removable mounting plate, three mounting plate screws and two keys..Rack cabinet used in classrooms, back offices and other areas with limited floor space.Dimensions: 14.6"H x 23.6"W x 21.7"D (unit), 6U"H x 19"W x 20.5"D (rack).Color: Black, Material: Steel.Maximum weight capacity: 200 lbs..Static/stationary weight capacity: 90.7 lbs..Rack height: 6U, Rack width: 19", Rack depth: 20.5".Grounding lug: Front and back door frames.Perfect for network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space.Side panels and front door lock securely to help prevent damage, tampering or theft, vented panels allow generous airflow that keeps equipment cool.Rotate cabinet 180 deg before mounting to open reversible front door left or right, convenient ports with removable covers.Ships fully assembled for quick installation, mounts to wall or rolls on floor with tripp lite’s optional SRCASTER caster kit.Wall-mounting holes spaced 16" apart for standard wall stud placement.Vertical mounting rails adjust in 0.875" increments to accommodate equipment up to 20.5" deep, such as network switches and patch panels.Rails adjust easily - unscrew them, slide them to desired depth and screw them back in, Rails support square-hole or threaded-hole mounting.Rack spaces numbered for easy reference.Includes: Wall-mount rack enclosure cabinet, 12 x M6 screws, 12 x M6 cage nuts, 12 x M6 cup washers, 12 x 12-24 screws, removable mounting plate.Meets EIA-310-E, RoHS certificates and standards.Weight: 200 lbs. max, 90.7 lbs. static capacity

Product Type: Open frame rack (2 post).Package Content: 20 x M5 screw, 4 rubber feet, 8 x screws, right bracket, left bracket, left vertical rail, right vertical rail, front base bracket, 20 x M5 cage nuts.Height (Rack Units): 8U.Manufacturer Warr

The 4U 13.78in. (35cm) deep wall-mounting bracket for patch panels and network equipment, delivers a sturdy and dependable equipment storage option, allowing you to wall mount data/IT equipment up to ta total of 44lbs. (20kg). It's the perfect solution for areas where space is at a premium like small office/home office environments or spaces with limited server room because it doesn't take up any floor space. The mounting bracket features an all-steel design and is suitable for mounting patch panels, or other slim 19in rack equipment to a wall, and to organize cabling or equipment in your network closet, wiring closet, back office or IDF. The sturdy steel construction is especially helpful for durability in harsh environments. The open frame wall rack's mounting holes are positioned 16in. apart, matching typical drywall construction framework to ensure simple and secure wall-stud anchoring. Cage nuts and screws are included with the wall-mount bracket, to save you the hassle of sourcing separate mounting hardware. The bracket is ideal for mounting equipment 12" or less in depth to ensure there is room for cabling..4U WALL MOUNT RACK: This 19 inch wide low profile wall mounted rack has a maximum mounting depth of 13.78 in [35 cm], recommended for networking equipment up to 12in deep, leaving 1.75in for cable routing; maximum weight capacity of 44 lbs. [20kg].COLD-ROLLED STEEL CONSTRUCTION: The wall mounting data rack features a solid steel design for ultimate durability and to ensure a safe and sturdy mounting solution & includes wall mounting hardware; Installs onto 16" studs with mounting holes.EASY CABLE MANAGEMENT: Built with efficiency in mind, the small wall mount patch panel bracket has rear cable routing access for easy cable organization in your network closet, server room, wiring closet, classroom.EASY TO INSTALL: The 4U wall mounting patch panel bracket ships fully assembled and comes complete with 16x M6 Screws and 16x M6 Cage Nuts for easier equipment installation, to save you the hassle of sourcing separate mounting hardware.STARTECH.COM ADVANTAGE: IT professionals choice for over 30 years; this 4U wall mount rack backed for life by StarTech.com, including free 24/5 North America based multi-lingual tech support.Mount networking equipment and shallow rackmount devices with this 4U wall-mountable rack

The StarTech.com® RK619WALLV 6U black vertical wall-mount server rack is a suitable mounting solution for virtually any surface such as wall, ceiling or desk. It is perfect for LAN switch, patch panel and A/V equipment. It has solid steel construction. This server rack measuring 5.9" x 19.8" x 7.6", offers trouble-free setup with wall-mount installation. It compliments standard construction framework. It includes 16 M5 cage nuts, 16 M5 screws with washers, six wood screws and instruction manual..Wall mount server rack is suitable for LAN switch, patch panel and A/V equipment.Dimensions: 5.9"H x 19.8"W x 7.6"D (external).Color: Black, Material: Solid steel material for durability.Form factor: Rack mountable, Rack height: 6U.Save space in your office or server room by mounting IT or AV equipment vertically to a wall or horizontally under a desk or work bench.6U bracket separate mounting patterns for both ceilings and walls.Features hassle-free setup with wall-mount installation holes spaced 16" apart and matching standard construction framework.Contains 16 x M5 cage nuts, 16 x M5 screws with washers, six wood screws and a instruction manual.RoHS Compliant.Weight: 44.8 oz..Comes with lifetime warranty