Classroom Standing Desks
200 results
Transform classrooms into active and collaborative spaces with the new patent-pending Kore Design Kids Sit-Stand Mobile Desk. Flexible classroom layouts, easy to move and reformat configuration as needed..Table top is manufactured with FDA approved Antimicrobial Protection that offers proven barrier protection for the desk against bacteria such as E. coli, mold and VIRUSES like H1N1 flu..Durable and Stable: Desktop is made from sturdy recyclable plastic and the piston and frame are made of steel for long-lasting stability..Folding table-top for multiple uses. Table angles of 45-90 degrees for various tasks, and folds down flat. Takes up less space than traditional desks and stacks neatly for storage or easier cleaning..Adjustable Height from 31 to 38": Easy access lever to raise and lower desk height. Sit or stand as needed..Anti-Roll, Anti-Tip Safety: Non-slip locking casters prevent rolling or tip-overs..Designed for Utility: Backpack hook, cup holder, and pencil tray for a no-mess experience..Work surface area is 31.5" x 21.5". Maximum load weight is 100 lb..Table tilts from 0° to 90° – adjust angle to suit task, or fold down to stack and store workstation away..10-Year Warranty: Satisfaction guaranteed with a 10-Year Warranty on Kore Design desks.
Height adjustable with simple pneumatic lift, the EDTC by NPS allows for working in a comfortable position with better blood flow and increased positive posture..Mobile Desk and Lectern for use in classroom and office settings.Grey Laminate Desk Top/Steel Frame.26" x 20.75"D x 27.75-44.5"H.No Storage.Non-Sound Lectern.10 Year Warranty.Adjustable Height From Low 27.75" To High 44.5" For Both Sit/Stand Positions.Grey Desk Top With Black Edge Banding.Spacious Work Surface.Powder Coated Steel Frame With Oval Shaped Sides.Equipped With Four Casters, Two Locking.The Sit+Stand Student’s Desk by National Public Seating is an essential ingredient in today's classroom and any collaborative environment.
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24" position up to a full standing 36" position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24" - 36" sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.GreenGuard Certified materials
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. . Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24" position up to a full standing 36" position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24" - 36" sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24" position up to a full standing 36" position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24" - 36" sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Advanced adjustment pin system, spring loaded pop pin.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24" position up to a full standing 36" position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24" - 36" sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details.Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24" position up to a full standing 36" position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24" - 36" sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Revolution Adjustable Height Classroom Table: The name says it all! When the computer monitor becomes a distraction or visual obstruction to the classroom instructor, this brillant design rotates and hides away the monitor into a locked position when not in use, keeping students focused. Versa Table's all steel frame construction will last for a LifeTime without lubrication, all pivot points have bronze inserted seated bushings for quiet movements that will never squeak or make noise. The release mechanism is a spring loaded and machine hardened steel pin system with a pull handle. We use compressed gas springs for smooth controlled movements when rotating the monitor. Almost a full 155 degrees with no clanking or slamming. The monitor mount has a limited range of adjustment so that monitors up to 24” can be mounted easily and angled in case of head glare. The rotating surface is a perfect fit, matching the main surface which is cut from the same sheet on our advanced computer control (CNC router saw). The backing has an extra sheet metal to guard against any old monitors overheating. This ingenious surface is mounted onto our Deluxe Adjustable Height Classroom table. Which has our heavy duty adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment. The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 12 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Rotating hide away monitor surface.Adjustable height 24” - 36” sitting or standing.Fixed CPU.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.LifeTime Warranty / Free Parts Program.GreenGuard Certified materials
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24" position up to a full standing 36" position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24" - 36" sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. . Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
The FlexiSpot E7 Pro is an upgrade to the E7 and is much sturdier because of the extra overlap between stages of the lifting column. This overlap is critical to enhanced sturdiness. The sloping angle design of the feet and set-back legs provide a more elegant style to your office. The E7 Pro includes a cable management tray and a magnetic fabric cable cover that makes installation a breeze..During the ups as well as the downs, you'll have a workday that goes smoothly with this height-adjustable standing desk.Adjust the desk to as low as 26″ or to as high as 51.6″.Made with an environment-friendly light bamboo desktop and a heavy-duty steel base in white.Dimensions: 51.6"H x 60"W x 30"D; holds up to 350 lbs..Includes a cable management tray with magnetic fabric cable cover to tidy up cables.Assembly required.Dual motors for a faster lifting speed.Keypad supports four programmable height presets and offers you a better operation experience with the LED touch screen and USB charging port.Semi-C leg structure offers eye-catching styling.Legs are positioned toward the back of the desk, giving you a greater legroom and space for storage.Extended overlapping column stages provide more stability.Perfect for live streaming, complex crafting, child learning, and much more.15-year manufacturer limited warranty
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24" position up to a full standing 36" position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24" - 36" sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24" position up to a full standing 36" position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24" - 36" sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program
Deluxe Adjustable Height Classroom Table: Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details..Adjustable height 24” - 36” sitting or standing.Adjustable CPU positions.Modesty panel (steel).Lower cable management tray.Advanced adjustment pin system, spring loaded pop pin.Lower modesty and support panel for maximum strength.Classroom activity table or computer lab furniture setup.BIFMA rated.Made in the USA.Lifetime Warranty / Free Parts Program