Continuity Tester Remotes

The Fluke LinkIQ cable+network tester is the solution to verify cable performance up to 10G and solve network connectivity problems. LinkIQ validates cable performance using frequency-based measurements to calculate maximum bandwidth (10BASE-T to 10GBASE-T), which ensure that tested links meet performance requirements. LinkIQ also performs ping tests to verify connectivity and provides nearest switch diagnostics including advertised data rate, switch name, IP address, port number and VLAN information, plus PoE testing and load test up to Class 8 (90 W). Ethernet Alliance PoE Certified for reliable multivendor interoperability. Additional features include: Cable Toning, Port Blink, Remote Office Locators, and the ability to manage results via LinkWare PC. Includes LinkIQ main unit, remote ID #1-7, RJ45-RJ45 patch cord, AC charger, RJ45/11 universal coupler, IntelliTone(TM) Pro 200 Probe, and duffel bag carrying case..This cable and network tester is the solution to verify cable performance up to 10G and solve network connectivity problems.Includes Remote ID #1-7, RJ45-RJ45 patch cord, AC charger, RJ45/11 universal coupler, IntelliTone Pro 200 Probe, and duffel bag carrying case.Works on a 3.6V 6400mAh lithium-ion battery.Host interface: USB Type-C.Validate cable performance up to 10GBASE-T via frequency-based measurements.Get connected switch data rate, switch name, IP address, port number, and VLAN.Detect the PoE class (1-8) and power, and perform a load test.Test connectivity to TCP/IP network through IP configuration and ping.Cable diagnostics including length plus IntelliTone, remotes 2-8.Manage results and print reports from LinkWare PC

The Fluke LinkIQ is capable of measuring lengths up to 1000' and provides distance to faults such as opens, shorts, and unterminated cable. The included MS-IE remote adapter identifies miswires and split pairs on RJ45, M12X, M12D, and M8D terminated cables. The LinkIQ qualifies cabling performance from 10 Mb/s to 10 Gb/s for EtherNet/IP, PROFINET, EtherCAT and other Industrial Ethernet protocols, performs ping tests to verify connectivity and also provides nearest switch diagnostics including advertised data rate, switch name and port number and VLAN information, plus PoE and load testing up to Class 8 (90W). Ethernet Alliance PoE Certified for reliable multivendor interoperability. Includes LinkIQ main unit, Remote ID #1-7, IntelliTone Pro 200 Probe, RJ45-RJ45 patch cord (M-F), RJ45-RJ45 patch cord (M-F), Quick Reference Guide, AC charger, RJ45/11 universal coupler, RJ45/M12X patch cord, RJ45/M12D patch cord, RJ45/M8D patch cord, RJ45/11 modular adapter, hanging strap with remote ID holder, and duffle bag carry case..This cable and network tester is capable of measuring lengths up to 1000' and providing distance to fault analysis (opens, shorts, and unterminated cable).Includes remote ID, RJ45-RJ45 patch cord, RJ45-RJ45 patch cord (M-F), AC charger, RJ45/11 universal coupler, RJ45/M12X patch cord, RJ45/M12D patch cord, RJ45/M8D patch cord, RJ45/11 modular adapter.Works on a 3.6V 6400mAh lithium-ion battery.Host interface: USB Type-C.Validate EtherNet/IP, PROFINET, EtherCAT cable performance up to 10GBASE-T.Get connected switch data rate, name, IP address, port number, and VLAN.Detect the PoE class (1-8) and power, and perform a load test.Test connectivity to TCP/IP network through IP configuration and ping.Cable diagnostics including length plus IntelliTone, remotes 2-8.Manage results and print reports from LinkWare PC

The Fluke Networks® JackRapid™ JR-LEV-2 patented jack termination tool is compatible with Leviton 61110, 5G110 and 6110G. The ergonomically designed handle reduces hand fatigue and offers easy, one-handed operation. It seats and cuts all wires at once and offers high quality, consistent terminations. The tool has replaceable blade head for use with multiple jack types..Fast answers: JackRapid allows you to terminate jacks eight times faster than traditional impact tools with accuracy that''s unmatched.Patented jack termination tool seats and terminates all wires simultaneously.Built in blade cuts off the excess wire after it is seated in the connector, eliminating the need for a secondary trim step.Simple, one handed operation, with an ergonomically designed handle, reduces hand fatigue.Additional information: Replaceable blade head for use with multiple jack types, for leviton 61110, 5G110, 6110G.Unique design easily acco mmodates close to wall installation.Application/usage: Cable termination.Compatibility: PC.Warranty: 18 months limited.Fluke Networks JackRapid Termination Tool - Saves Time

Analog tone and probe is the best choice for toning and tracing wire on non-active networks, and specifically for identifying individual pairs with SmartTone technology..Interfaces/ports: Tone mode, 1 x RJ 11.Material: Copper.Storage temperature: 40 - 158 deg F.Humidity range operating: 5 - 95% (non condensing).Connectors: BNC, RJ 11.Output voltage level in continuity mode: 8 Vdc with fresh battery, over voltage protection: 60 VDC in toner/polarity mode.Frequency: 1000/1500 Hz nominal, battery: 9 V alkaline.On/off push button.Loud large speaker amplifies tone through walls, enclosure, wood or plaster.Tests, tools and measurements: Toning.Quick twist tip for easy replacement, easy to use adjustable volume control dial.Includes: analog toner, probe.Application/usage: Cable testing.SmartTone provides five distinct tones for exact pair identification.Loud tones can be send up to 10 miles (16 kilometers) on most cables, this tone change you hear through the probe positively verifies the correct wire pair.Warranty: 18 months limited.Fluke Networks Pro3000 Series Analog Tone and Probe Kit - Identify Inactive Lines Fast

The Fluke Networks network testing device will allow you to keep your network running smoothly. It will allow you to easily test twisted-pair cables and trace installed hidden cables. It uses an easy-to-read LED interface and a two-tone generator to let you know whether it detects any problems or defects..Display type: LED.Interfaces/Ports: 1 x RJ-45.Testing of twisted pair cables for open circuits, shorts, crossed pairs, reversed pairs and split pairs.Easy-to-read fault display.Tone generator for tracing installed cables hidden in walls, floors and ceilings.Remote unit enables one-person testing of installed cables.Micromapper's built-in tone generator works with the IntelliTone™ pro probe or any other analog probe, allowing you to trace cable through walls, floors and ceilings.Micromapper also includes a remote unit that allows one person to test installed cabling or patch cords.MicroMapper quickly and easily tests twisted pair cabling, giving you visibility of opens, shorts, crossed, reversed and split pairs.Just push the TEST button and MicroMapper will automatically scan all wire pairs for any existing faults in your cable.Generation of two tones for tracing cables and lication hidden cables.Includes: Micromapper and Micromapper remote, patch cable, 6 V alkaline battery and user guide.Weight: 0.28 lbs..Dimensions: 4.93"(H) x 2.05"(W) x 1.18"(D).1 year limited warranty.Fluke Networks Network Testing Device - Powerful and Reliable

This test set features the latest in test set technology. Designed with a superior, radiant liquid crystal display (LCD) user interface, it allows you to see what cannot be heard in any outside plant environment..Display type: LCD.Data lockout with data lockout override.Line and battery powered: Shares power from the telephone line and the 9 V internal battery, increasing the life of the battery.Replaceable heavy-duty braided cord and locking spring loaded belt clip.Low battery indication, volume control levels.Mute indication.Polarity indication.Tone and pulse dialing.Amplified speaker.Last number redial.Over voltage protection.Over current protection.High voltage lockout.PBX pause button, 2-way hands-free speakerphone for true hands-free conversation.Weight: 1.5 oz.Dimensions: 10"(H) x 3.8"(W) x 4.3"(D).Fluke Networks® 52801RJ9 LCD Test Set features backlit LCD and glow-in-the-dark keypad with ABN/PP and RJ11 Plug.

Signal interference from sources in the environment can make tracing cable a frustrating process. The Fluke Networks Pro3000 filtered probe blocks interference and "stops the buzz" by obstructing these signals allowing you to hear the tone you are tracing loud and clear. Probe's ergonomic sleek design is easy to handle and use. The large speaker on the probe makes the tone easier to hear through walls, enclosures, wood, or plaster. A recessed on/off button helps prevent the probe from accidentally being turned on in the pouch. Line cord features angled bed-of-nails clips and a rugged RJ11 plug for direct access to phone and data jacks without adapters. External switch allows selection of solid or alternating tone options, indicated with solid or flashing LEDs. Use the SmartTone capability of the Pro3000 analog tone generator to identify the right pair. When touching the wires together and momentarily shorting the far end of a cable pair, the SmartTone technology will change the cadence of the tone generated. This tone change you hear through the probe positively verifies the correct wire pair. SmartTone provides five distinct tones for exact pair identification up to 10 miles away..Filtered probe and tone generator kit for easy cable tracing.Probe dimensions: 1.6"H x 9.8"W x 1.3"D; tone generator dimensions: 1.4"H x 2.7"W x 2.4"D.Filtered probe comes in yellow and features a black replaceable tip; tone generator comes in blue.Innovative filtered probe obstructs signal of 60Hz and its harmonic frequencies.SmartTone technology provides five distinct tones for precise pair identification.Sends loud tone up to 10 miles on most cables.Slide switch selects continuity or tone mode.Loud speaker on probe makes the tone easier to hear through drywall, wood, and other enclosures.External switch allows for selection of solid or alternating tone options, indicated with solid or flashing LEDs.Supports headset via 3.5mm audio port for use in noisy environments.Angled bed-of-nails clips allow for easy access to individual pairs.RJ11 connector is perfect for use on telephone jacks.Supports switching between filtered and unfiltered modes with one button press.Utilizes an auto-off feature that deactivates the probe after five minutes to conserve battery life.Includes one spare tip.Frequency modes: 1000Hz nominal solid frequency and 1000/1500Hz nominal alternating frequency.Overvoltage protection: 60VDC in tone/polarity mode.Output power in tone mode: 8dBm into 600 ohms.Output voltage level in continuity mode: 8VDC with fresh battery.Both probe and tone generator require a 9V alkaline battery

MS2-FTK MicroScanner copper and fiber cable verifier kit helps find common errors by displaying graphical wiremap, pair lengths, distance to fault, and far-end device. Integrated RJ11, RJ45, and coax test ports support many types of low-voltage cable testing with no need for adapters. Test and verify your fiber connections with the SimpliFiber Pro power meter and light source..Network copper and fiber test kit measures length, verifies wiremap, identifies remote ID locators, and detects Ethernet ports.Dimensions: 1.4"H x 3"W x 6.4"D.Comes in black and yellow.Kit includes: MicroScanner cable verifier and SimpliFiber Pro (FTK1000) fiber test kit (SimpliFiber Pro optical power meter, 850/1300 multimode source, magnetic strap attachments, carrying case, and SC power-meter adapter).Test connectors: shielded 8-pin modular jack accepts 8-pin modular (RJ45) and 4-pin modular (RJ11) plugs; MicroScanner2: F-connector for coaxial cable.Detects single-wire faults, shorts, miswires, split pairs, and up to seven far-end adapter IDs.Features a monochrome LCD with backlight.MicroScanner solicits and detects the presence of 802.3af compatible PoE (Power over Ethernet) devices.MicroScanner PoE: solicits and detects the presence of 802.3af, at, bt, and UPOE (Cisco's Universal Power over Ethernet) compatible PoE devices.MicroScanner2 detects the advertised speed of 802.3 Ethernet ports with speeds of 10Mbps, 100Mbps, and 1Gbps.Verifies media services: 10/100/1000 Ethernet, POTS, and PoE.Tone generator produces 500kHz digital, 400kHz and 1kHz analog tones.Supports toning and cable mapping with a Fluke Networks digital IntelliTone probe

Fluke Networks MS2-100 MicroScanner2 Cable verifier provides revolutionary change in voice, data and video cable without any technician error. Incorporated with RJ11, RJ45 and coax cable test ports that support virtually any type of low-voltage cable testing..MicroScanner2 cable verifier is suitable to verify voice/data/video cable and services.Measures 3"H x 6.4"W x 1.4".Includes 2 AA alkaline battery with run time of 20 hours.Supports twisted pair media for high speed transmission.F connector, RJ-11, RJ-45 interfaces/ports for flexible connectivity.FTP, SSTP, UTP cables for long distance transmission.Distance to fault, Length, PoE, speed test copper cables to 1000Base-T, Wiremap tests, tools and measurements.Requires operating temperature of 32 - 123 deg F, storage temperature of -4 - 140 deg F and 90 % relative humidity.Operates at altitude 4000 m (operating) and 12000 m (storage).Monochrome, backlight LCD display provides brighter images.Length measurement of 11.81" - 1509.19'.Cable tone generator, rubber over mold enhances grip and increases ruggedness.Contains MicroScanner2 cable verifier with main wiremap adapter, multi-language getting started guide, user CD, batteries.Meets N10140 C-Tick EMC standard, FCC Part 15 Class A, CE European Union Directives.Weighs 0.8 lbs.Comes with 1 year warranty.Fluke Networks® MicroScanner2 Cable verifier is capable of verifying voice/data/video cable and services with the help of a revolutionary user interface. Features strong housing.

Fluke Networks® MS2-KIT MicroScanner2 Professional kit includes MicroScanner2 cable verifier with main wiremap adapter, remote identifiers #2-7 and IntelliTone Pro 200 probe. Comprises of shielded twisted-pair RJ45 patch cord, RJ11 patch cord, clip-set RJ45 to 8 alligator clip bare wire adapter and F Coax push on patch cord for effective detection. Comes with accessory soft pouch for user convenience. Features two AA alkaline batteries and a 9 V alkaline battery for long working of the verifier. Kit has MicroScanner2 getting started guide, MicroScanner2 owners CD, IntelliTone Pro getting started guide and IntelliTone Pro owners CD for trouble-free usage of the device. All the components come in a deluxe Fluke Networks carry case for added convenience..MicroScanner2 professional kit is suitable to verify voice/data/video cable and services.Measures 6.4"H x 3"W x 1.4"D.Supports copper media for high speed transmission.F connector, RJ-11, RJ-45 interfaces/ports for flexible connectivity.FTP, SSTP, UTP cables for long distance transmission.Distance to fault, Length, PoE, speed test copper cables to 1000Base-T, Wiremap tests, tools and measurements.Requires operating temperature of 32 - 123 deg F, storage temperature of -4 - 140 deg F and 90 percentage relative humidity.Operates at altitude 4000 m (operating) and 12000 m (storage).Monochrome, backlight LCD display provides brighter images.Locates virtually any cable or wire pair with IntelliTone digital and analog toning.Rubber over mold enhances grip and increases ruggedness.Contains accessory soft pouch, 2 x AA alkaline batteries, 1 x 9 V alkaline battery, MicroScanner2 getting started guide, owners CD.Contains cable verifier with main wiremap adapter, remote identifiers, IntelliTone Pro 200 probe, shielded twisted-pair RJ45 patch cord.Meets N10140 C-Tick EMC standard, FCC Part 15 Class A, CE European Union Directives.Weighs 0.8 lbs.Comes with 1 year warranty.Fluke Networks® MicroScanner2 Professional kit tests voice/data/video cable/services with the help of a revolutionary user interface. Includes essential verification components.

The most essential tools for electrical and telecom technicians in our sleek form-fitting PVC dur-a-grip tool pouch - holds your tools securely inside, even upside down..All the tools you need (in one pouch) to cut, strip, clean and make connections.Application/usage: Six tool kits combinations available for a multitude of applications.Easy to use cable stripper quickly rings and slits many types of cable.Use the probe pic to check for loose or damaged connections.D914 and D814 industry standard punchdown tools make for solid terminations.All kits include ergonomically designed Dur a Grip pouch for convenient tool storage on belt.Cut and strip wire cleaner and faster with the electricians D snips.Includes: IS50 with D914S impact tool, D snips, cable stripper, eversharp 66/110 cut blade.Fluke Networks Pro-Tool Kit - Tools and Storage in One

The most essential tools for electrical and telecom technicians in our sleek form-fitting PVC dur-a-grip tool pouch - holds your tools securely inside, even upside down..All the tools you need (in one pouch) to cut, strip, clean and make connections.Application/usage: Six tool kits combinations available for a multitude of applications.Easy to use cable stripper quickly rings and slits many types of cable.Use the probe pic to check for loose or damaged connections.D914 and D814 industry standard punchdown tools make for solid terminations.All kits include ergonomically designed Dur a Grip pouch for convenient tool storage on belt.Cut and strip wire cleaner and faster with the electricians D snips.Includes: D814 impact tool, electricians D Snips, cable stripper, Eversharp 66/110 cut blade, probe pic, carrying case.Fluke Networks Pro-Tool Kit - Six Tools in One Place

Fluke Networks Termination test kit consists of IntelliTone pro probe IS60 pro-tool, multi-language getting started guide, user CDs, battery, deluxe fluke networks carry case. Kit has an approximate weight of 12.8 oz..Reduce test time and user error.Eliminate awkward test adapters.Rule out service problems fast.Locate elusive cables in seconds.Repair or replace tools less often.Environmental parameters: Min operating temperature 32 degree F.Technology: LCD.Color support: Monochrome.Features: Backlight.Connectors: F connector, RJ-45, RJ-11.Compliant Standards: FCC class A, EN 61326-1, EN 61010-1.Cables included: 1 x RJ-45 to RJ-45 patch cable, 1 x RJ-11 cable.Cable type: UTP, FTP, SSTP.Included accessories: Carrying case, lanyard, Pro-Tool kit IS60.Weight: 12.8 lb.Termination test kit.Fluke Networks® Termination test kit with a microscanner2 cable verifier tests all common media types including RJ11, RJ45 and coax without using adapters.

Fluke Networks? Pro3000™ Analog probe is easy-to-use with adjustable volume control dial and "quick-twist" tip for easy replacement. Probe features recessed on/off button that helps prevent accidental turn on when placed in the pouch..Interfaces/ports: RJ-45.Tone and trace wire on non-active networks.SmartToneTM technology provides five distinct tones for exact pair identification.Sends loud tone up to 10 miles (16 kilometers) on most cables.Loud speaker on Probe makes the tone easier to hear through drywall, wood, and other enclosures.Angled bed-of-nails clips allow easy access to individual pairs.RJ-11 connector is ideal for use on telephone jacks.Attach nylon pouch (included in kit) to your belt for easy transport.Battery: 9 V alkaline.Case dimensions: 2.7" x 2.4" x 1.4".Analog prob user interface: On/off pushbutton, volume dial, Replaceable tip, 3.5mm earphone jack.Solid Frequency: 1000 Hz nominal, alternating frequency: 1000/1500 Hz nominal, over voltage protection: 60 VDC in toner/polarity node.Output power in tone mode: 8 dB min to 600 Ohms.Output voltage level in continuity mode: 8 VDC with fresh battery.Fluke Networks® Pro3000™ Analog probe features a loud large speaker that amplifies the tone through walls, enclosure, wood or plaster and uses alkaline battery.

Fluke Networks® MT-8200-60-KIT IntelliTone Pro 200 LAN toner and probe kit comes with IntelliTone 200 LAN toner and 200 probe and coax F connector adapter for reliable operation. Probe helps in detecting 1 KHz and digital signal from an analog toner. You can also isolate cables and wires that comes within a bundle. This toner and probe with IntelliTone digital toning technology helps in detecting faults and verifies continuity in just one-step. Whereas the toner and probe with SmartTone® analog toning technology isolates single pair of wires and helps in detecting or locating voice, audio or video. Kit includes 9-V batteries, two RJ11/RJ45 patch cables and test leads with alligator clips..IntelliTone Pro 200 LAN toner is suitable to detect faults and verifies continuity.Includes 1 alkaline battery with run time of 20 hours and provides 9 V of voltage for added convenience.Supports copper media for high speed transmission.Banana x 2, RJ-45 interfaces/ports for flexible connectivity.Cable termination, Ethernet link diagnostic, Tests for continuity, Toning tests, tools and measurements:.Requires operating temperature of 32 - 104 deg F, storage temperature of -4 - 140 deg F and 95 % relative humidity.Operates at altitude of 3000 m.Comes with tomer LED display,(8) LED indicators and Thumbwheel switch, volume control wheel.Contains IntelliTone 200 LAN toner and 200 Probe, coax F connector adapter, (2) RJ11 and (2) RJ45 patch cables.Fluke Networks® IntelliTone Pro 200 LAN toner and probe kit eliminates false signals and noise with its digital toning. Helps in locating cables on active networks.

The Fluke Networks™ MMC-50-SCST 344.49' 50 mu m SC/LC multimode launch cable is suitable for use with OptiFibers Pro OTDR tester. This fiber optic launch cable has SC male connector on one end and ST male connector on other end for enhanced connectivity..Multimode launch cable for tester.Connectors: One SC male on first end, one ST male on second end.Cable length: 344.49', Cable type: Fiber optic.Core/cladding diameter: 50 mu m.Compatibility: OptiFibers Pro OTDR tester and DTX-1800 OTDR