Crate Rollers
3 results
The Black Eylar SA00006 XL Waterproof and Shockproof Transport Roller Hard Case with Foam Insert is designed to secure your gear for transport or storage. Roller wheels and an extendable handle let you move this rugged equipment case with ease. Its adaptive pressure-equalization valve releases built-up air pressure allowing for atmospheric compensation when transported at high or low altitudes and within cargo vacuums. A waterproof seal is formed when the case is latched closed, applying pressure to a rubber gasket that is molded to the perimeter of the case. When fully submerged, it provides waterproof protection for up to 3.2 ft. (1 m). The SA00006 hard equipment roller case comes with 4 layers of foam designed to keep your valuables firmly in place — 1 customizable pull-and-pluck cubed foam layer, 1 solid foam layer, 1 solid bottom pad, and 1 top egg-create layer. 2 press-and-pull snap latches secure the full length of the case..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67).4 layers of foam protect your gear—1 customizable pluck-and-pull foam, 1 solid layer foam, 1 solid pad, and 1 top egg-crate foam.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Roller wheels and extendable handle for easy transport.Meets TSA requirements with lockable hasps and fittings.Outer dimensions: 23.75 in. x 20 in. x 11.75 in..Inner storage area: 22.25 in. x 17.25 in. x 10.12 in. (lid included).⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Eylar SA00007 XXL Waterproof and Shockproof Gear Hard Transport Roller Case with Foam Insert combines heavy-duty protection with the ease of transportation. A tough outer shell allows for shock resistance while a strong seal creates water protection. Inside, there is compartmentalized foam to keep belongings safe and organized. A lockable handle pulls out to carry the box with sturdy wheels. Its air pressure equalizer knob lets you compensate for altitude while traveling. 4 layers of foam keep your valuables securely in place. This protective trolley case is ideal for traveling with heavy and sensitive items such as cameras, laptops, electronics, tools, accessories, and equipment. Clamps on top shut the box while its grooves make it easy to stack. External dimensions are 31.1 in. x 23.42 in. x 14.37 in. while internal dimensions are 28.34 in. x 20.47 in. x 11.02 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67).Ideal for cameras, laptops, electronics, tools, and equipment with space for power cables and accessories.4 layers of foam protect your gear—1 customizable pluck-and-pull foam, 1 solid layer foam, 1 solid pad, and 1 top egg-crate foam.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Roller wheels and extendable handle for easy transport.External dimensions: 31.1 in. x 23.42 in. x 14.37 in..Internal dimensions: 28.34 in. x 20.47 in. x 11.02 in..Limited lifetime warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Black Eylar SA00034 22-In. Carry-on Travel Roller Waterproof Equipment Hard Case with Foam Insert is designed to secure your equipment for transport or storage. It is sized to fit in standard overhead storage compartments for air travel. It meets TSA’s strict requirements for transport on airplanes in the USA. This case is IP67 waterproof, dustproof, and shockproof and a rubber gasket lines the rim of the case, so when it’s latched closed, it creates a waterproof seal. When fully submerged, it provides waterproof protection for up to 3.2 ft. (1 m). The gear case is also resistant to extreme heat and freezing cold with a working temperature range of -20°F (-29°C) to 140°F (60°C). The hard case includes 4 layers of foam—1 egg-crate top liner layer, 2 pull-and-pluck customizable layers, and 1 solid bottom pad layer. Press-and-pull snap latches secure the full length of the hard case and 2 padlock-adaptable fittings allow for secure storage at home or on the go. An innovative pressure equalization valve allows the case to quickly equalize to different air pressures when traveling from different altitudes. The outer dimensions are 22 in. x 13.81 in. x 9 in. while the inner storage area is 19.75 in. x 11 in. x 7.6 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67); rubber gasket lines rim of case, to create waterproof seal when latched closed.Ideal for cameras, lenses, electronics, and tools; designed to fit standard overhead airline compartments in the USA; TSA-friendly.4 layers of foam protect your gear-1 top egg-crate foam, 2 customizable pluck-and-pull foam layers, and 1 solid bottom layer of foam.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.2 padlock-adaptable hasps.Roller wheels and extendable handle for easy transport.External dimensions: 22 in. x 13.81 in. x 9 in..Internal dimensions: 19.75 in. x 11 in. x 7.6 in..Limited lifetime warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
You May Also Like
The Gray Eylar SA00002 Large Waterproof and Shockproof Gear Hard Case with Foam Insert gives extra protection to your contents with 1 customizable pull-and-pluck cubed foam layer, 2 solid foam layers, and 1 layer of egg-crate foam padding. It also makes for safer traveling with its pressure equalizing knob. The hard case comes in a convenient size, making it easy to store inside a backpack or luggage and makes it ideal for storing cameras, electronics, and more. The outer dimensions are 19.78 in. x 15.77 in. x 7.41 in. while the inner storage area is 18.06 in. x 12.89 in. x 6.72 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear; provides waterproof protection for up to 3.2 ft. (1 m) of being fully submerged thanks to its rubber gasket lining.Ideal for standard DSLR camera, lenses, and accessories.2 customizable pull-and-pluck cubed foam layers, 1 egg crate foam layer, and 1 solid foam layer protect your gear.Polypropylene body, ABS latches and handles, and steel pins keep gear secure when in transport.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Meets TSA requirements with lockable hasps and fittings.Stackable design.External dimensions: 19.78 in. x 15.77 in. x 7.41 in..Internal dimensions: 18.06 in. x 12.89 in. x 6.72 in..Limited lifetime warranty.Gray.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Black Eylar SA00022 Small Waterproof and Shockproof Gear and Camera Hard Case with Foam Insert is ideal for storing cameras, electronics, tools, and more. The pluck-and-pull foam along with its sturdy design will safely store sensitive items during travel or on the go. This case is IP67 waterproof, dustproof, and shockproof. The hard case includes 3 layers of foam—1 egg-crate top liner layer, 1 pull-and-pluck customizable layer, and 1 solid bottom pad layer. An innovative pressure equalization valve allows the case to quickly equalize to different air pressures when traveling from different altitudes. A rubber gasket lines the rim of the case, so when it’s latched closed it creates a waterproof seal. 2 padlock hasps allow this case to be secured with padlocks and meet TSA requirements for transport. The outer dimensions are 10.62 in. x 9.68 in. x 4.87 in. while the inner storage area is 9.25 in. x 7.12 in. x 4.12 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67); rubber gasket lines case’s rim to create a waterproof seal when latched closed.Ideal for cameras, lenses, mobile devices, and small gear.1 customizable pull-and-pluck layer, 1 egg-crate top pad layer, and 1 solid bottom layer pad.Polypropylene body, ABS latches and handles, and steel pins keep gear secure when in transport.2 padlock hasps allow you to add your own padlock to keep valuables secure.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Meets TSA requirements with lockable hasps and fittings.External dimensions: 10.62 in. x 9.68 in. x 4.87 in..Internal dimensions: 9.25 in. x 7.12 in. x 4.12 in..Limited lifetime warranty.Black.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Yellow Eylar SA00001 Standard Waterproof and Shockproof Gear Hard Case with Foam Insert is designed to secure your gear for transport or storage. A crushproof, folding carry handle makes this case easy to transport or store inside of a backpack or other small bag. The equipment case is injection-molded from reinforced, high-pressure polypropylene plastic that is waterproof and crushproof. Its adaptive pressure-equalization valve releases built-up air pressure allowing for atmospheric compensation when transported at high or low altitudes and within cargo vacuums. A waterproof seal is formed when the case is latched closed, applying pressure to a rubber gasket that is molded to the perimeter of the case. When fully submerged, it provides waterproof protection for up to 3.2 ft. (1 m). The gear case is also resistant to extreme heat and freezing cold with a working temperature range of -20°F (-29°C) to 140°F (60°C). The SA00001 hard equipment case comes with 3 layers of foam designed to keep your valuables firmly in place — 2 fully customizable pull-and-pluck cubed foam layers and 1 layer of egg-crate foam padding for the lid. 2 press-and-pull snap latches secure the full length of the case. 2 padlock-adaptable fittings allow for secure storage at home or on the go. Uniform ridges on the top and bottom create an in-line stackable design for multi-case transport. The outer dimensions are 13.37 in. x 11.62 in. x 6 in. while the inner storage area is 11.81 in. x 8.87 in. x 5.18 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67).2 customizable pull and pluck layers, 1 top egg crate layer, and 1 bottom liner padding layer protect your gear.Polypropylene body, ABS latches and handles, and steel pins keep gear secure when in transport.0.25-in. padlock hasps allow you to add your own padlock to keep valuables secure.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Edge-to-edge crushproof protection up to 3,000 lbs. of directly dispersed weight.Meets TSA requirements with lockable hasps and fittings.External dimensions: 13.37 in. x 11.62 in. x 6 in..Internal dimensions: 11.81 in. x 8.87 in. x 5.18 in..Limited lifetime warranty.Yellow.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Green Eylar SA00001 Standard Waterproof and Shockproof Gear Hard Case with Foam Insert is designed to secure your gear for transport or storage. A crushproof, folding carry handle makes this case easy to transport or store inside of a backpack or other small bag. The equipment case is injection-molded from reinforced, high-pressure polypropylene plastic that is waterproof and crushproof. Its adaptive pressure-equalization valve releases built-up air pressure allowing for atmospheric compensation when transported at high or low altitudes and within cargo vacuums. A waterproof seal is formed when the case is latched closed, applying pressure to a rubber gasket that is molded to the perimeter of the case. When fully submerged, it provides waterproof protection for up to 3.2 ft. (1 m). The gear case is also resistant to extreme heat and freezing cold with a working temperature range of -20°F (-29°C) to 140°F (60°C). The SA00001 hard equipment case comes with 3 layers of foam designed to keep your valuables firmly in place — 2 fully customizable pull-and-pluck cubed foam layers and 1 layer of egg-crate foam padding for the lid. 2 press-and-pull snap latches secure the full length of the case. 2 padlock-adaptable fittings allow for secure storage at home or on the go. Uniform ridges on the top and bottom create an in-line stackable design for multi-case transport. The outer dimensions are 13.37 in. x 11.62 in. x 6 in. while the inner storage area is 11.81 in. x 8.87 in. x 5.18 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67).2 customizable pull and pluck layers, 1 top egg crate layer, and 1 bottom liner padding layer protect your gear.Polypropylene body, ABS latches and handles, and steel pins keep gear secure when in transport.0.25-in. padlock hasps allow you to add your own padlock to keep valuables secure.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Edge-to-edge crushproof protection up to 3,000 lbs. of directly dispersed weight.Meets TSA requirements with lockable hasps and fittings.External dimensions: 13.37 in. x 11.62 in. x 6 in..Internal dimensions: 11.81 in. x 8.87 in. x 5.18 in..Limited lifetime warranty.Green.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Pelican™ Carry-on case with foam is an efficient solution to carry any kind of valuable luggage's. Black colored case internally measures 19.75" x 11" x 7.6" and externally measures 22" x 13.81" x 9". Features ultra-high impact structural polycarbonate rugged construction for strength and added durability. Unbreakable case provides optimum resistance to water, air, dust and various chemicals. Corrosion-proof case has large fold down handle, long side handle, long front handle as well as retractable extension handle for easy lifting and comes with double-throw latches to open easily. Crushproof case features two padlockable hasps to offer added safety and built-in dual integrated automatic pressure equalization valves that helps to release built-up air pressure..Is of shipping case type.Comes in black color for new look.Features ultra-high impact polycarbonate exterior and 1.7 lbs polyurethane foam interior construction.Comes with box style case, 1.79" deep lid and 5.79" deep bottom.Watertight, crushproof and dust proof, chemical-resistant, corrosion-resistant and airtight for durability.Used with equipment that requires foam protection.Features front haul handle, side haul handles, extension handle and built in wheels for carrying/transport.Comes with 20.1 lbs maximum buoyancy.Features open cell core with solid wall design and polyurethane wheels with stainless steel bearings that is strong/lightweight.Features automatic pressure equalization valve, stainless steel hardware and padlock protectors.Features O-ring seal, comfortable rubber over-molded top and side handles and personalized nameplate service.Meets IP67, DEF STAN 81-41/STANAG 4280 standards.Weighs up to 13.6 lbs with foam and 12 lbs without foam.Comes with lifetime guarantee of excellence.Pelican™ Carry-on case with foam in black color measures 19.75" x 11" x 7.6" and provides ultimate protection to any kind of luggage's. Features polymer O-ring seal.
The Green Eylar SA00010 Waterproof and Shockproof Gear and Camera Hard Case with Foam Insert is designed to secure your gear for transport or storage. The equipment case is injection-molded from reinforced, high-pressure polypropylene plastic that is waterproof and crushproof. Its adaptive pressure-equalization valve releases built-up air pressure allowing for atmospheric compensation when transported at high or low altitudes and within cargo vacuums. A waterproof seal is formed when the case is latched closed, applying pressure to a rubber gasket that is molded to the perimeter of the case. When fully submerged, it provides waterproof protection for up to 3.2 ft. (1 m). The gear case is also resistant to extreme heat and freezing cold with a working temperature range of -20°F (-29°C) to 140°F (60°C). The SA00010 hard equipment case comes with 3 layers of foam designed to keep your valuables firmly in place — 1 fully customizable pull-and-pluck cubed foam layer, 1 solid layer pad, and 1 layer of egg-crate foam padding for the lid. 2 press-and-pull snap latches secure the full length of the case. 2 padlock-adaptable fittings allow for secure storage at home or on the go. Uniform ridges on the top and bottom create an in-line stackable design for multi-case transport. The outer dimensions are 11.65 in. x 8.35 in. x 3.78 in. while the inner storage area is 10.54 in. x 6.04 in. x 3.16 in..Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67).Ideal for cameras, mobile devices, gear, and lenses.1 customizable pull-and-pluck layer, 1 solid layer pad, and 1 egg-crate top pad layer.Polypropylene body, ABS latches and handles, and steel pins keep gear secure when in transport.0.25-in. padlock hasps allow you to add your own padlock to keep valuables secure.Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes.Edge-to-edge crushproof protection up to 3,000 lbs. of directly dispersed weight.Meets TSA requirements with lockable fittings.External dimensions: 11.65 in. x 8.35 in. x 3.78 in..Internal dimensions: 10.54 in. x 6.04 in. x 3.16 in..Limited lifetime warranty.Green.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Pelican™ 18.06" x 12.89" x 6.72" Hard case in black color with foam features open cell core with solid wall design, stainless steel hardware and padlock protectors. Case is easy to open double throw latches and comfortable rubber over-molded handle..Easy open double throw latches.O-ring seal.Automatic pressure equalization valve.Comfortable rubber over-molded handle.Stainless steel hardware and padlock protectors.2 x level pick 'N' Pluck with convoluted lid foam.Personalized nameplate service available.Interior dimensions: 18.06" x 12.89" x 6.72".Pelican™ 18.06" x 12.89" x 6.72" Hard case in black color with pick N pluck foam is watertight, crush-proof and dust-proof while featuring automatic pressure equalization valve and O-ring seal.
Whether you're entering a warzone or just a location that seems like one, the Pelican 1495 laptop case will protect your equipment from being damaged by rough handling and tough conditions. This case is watertight, crushproof, and dustproof, so even if you drive through a storm, your laptop will remain safe and secure..Black.Dimensions: 18.87"(H) x 13.12"(W) x 3.81"(D) interior, 21.62"(H) x 17 1/4"(W) x 4.87"(D) exterior.Material: Polyurethane foam interior, high-impact structural copolymer polypropylene exterior.Maximum buoyancy: Floats in salt water with 46.15 lbs. load.Application/usage: Notebook.Compatibility: Notebook - 17" display screen.Maximum screen size supported: 17".Features: Watertight, crushproof, and dust proof.Internal depth: 2.68" base, 1.12" lid.Easy open double throw latches.Padded shoulder strap.Stainless steel padlock protectors.Pick N Pluck with convoluted lid foam.Fold down over molded handle.Automatic pressure equalization valve.Includes 3 dial combination lock.Weight: 8.38 lbs..Warranty: Lifetime limited.Pelican 1495 Laptop Case - Foam-Padded Interior
Traveling with your phone, iPad, tablet, and computer? Your life is about to become easier with the G Force tech accessory organizer, designed with three separate mesh pockets to store your chargers, headphones and batteries, keeping them neat and detangled. Mesh construction allows you to see what is in each pocket without having to open them. The organizer folds up with an adjustable closure strap and side release buckle. The case is water-resistant and made of ripstop material, protecting all of your gadgets precious accessories. It fits perfectly in your handbag, suitcase, briefcase, backpack, or car..Make your everyday life easier with this travel tech organizer.Designed with three separate mesh pockets to store your chargers, headphones, and batteries, keeping them neat and detangled.Made of lightweight ripstop material in black.Dimensions: 6.7"H x 13.78"W x 0.12"D.Features water-resistant construction.Adjustable closure and side release buckle for convenient use
Pelican™ Storm case with foam has multilayer cubed bottom foam inner and provides airtight/watertight protection. Case with press and pull latches has an attached vortex valve to adjust air pressure, solid-core handle and wheels for ease of carrying..Black.Dimensions: Exterior: 10.6"H x 21.2"W x 16"D, interior: 10"H x 20"W x 14"D, total lid depth: 10", lid depth: 2", bottom depth: 8", interior cubic volume: 1.62 cubic feet.Material: Exterior: HPX high performance resin, interior: Multilayer foam.Closure: Press & pull latches, 2 unbreakable molded-in hasps, hinges with integrated feet.Padded handles, telescoping handle, built in wheels are carrying/transport options.129.91 lbs. maximum buoyancy.Telescoping handle, Vortex® valve, flush powerful hinges, watertight.Multilayer cubed foam bottom and a convoluted foam pad in the lid.2 wheels.Volume capacity: 1.62 gal.Temperature rating: -29 - 60 deg C.Application/usage: Military.Includes Pelican iM2620 storm trak case with foam (black), foam set.Weight: 14.5 lbs..Warranty: Lifetime.Pelican™ Storm case with foam comes in black color and is made of HPX resin material for added strength as well as durability.
Designed for professionals and students alike, this dual-purpose case safeguards your MacBook from daily damage while offering a built-in adjustable stand for ergonomic comfort. The frosted clear backing shows off your MacBook's sleek design, while the reinforced corners and durable materials deliver everyday protection..Designed for MacBook Pro 16" (2024) – Ensures a perfect, secure fit for your device..Built-in adjustable stand – Enhances viewing angles and promotes better posture during long work sessions..Triple-hardened polycarbonate and rubber construction – Reduces yellowing, resists impact, and protects from scratches..Shock-absorbing reinforced corners – Offers drop protection from everyday accidents..Frosted clear back with black trim – Adds a premium look while showcasing the MacBook's original style..Form-fitting, lightweight design – Keeps your device protected without adding bulk..SAHARA Limited Lifetime Replacement Warranty..The SaharaCase Hard Shell Case with Stand for MacBook Pro 16" (2024) combines rugged protection with elevated functionality.
Crafted from premium nylon and polyester, this lightweight yet tough backpack securely fits laptops up to 16 inches and is built to keep up with your day. Stay organized with 5 thoughtfully designed pockets, including padded compartments for your laptop, tablet, and everyday essentials. A built-in side handle offers the option to carry it briefcase-style for added versatility. The soft, cushioned back panel provides superior comfort for extended wear, and the integrated USB charging port lets you conveniently charge your devices on the go—just connect your power bank inside and plug in externally..Wide Laptop Compatibility - Fits laptops from 11" to 16", including gaming and business models.Organized Storage - 5 multi-functional compartments for accessories, documents, and electronic devices.On-the-Go Charging - Built-in USB charging port with internal pocket for your power bank (power bank not included).Versatile Carry Options - Side handle allows for convenient horizontal, briefcase-style carrying.All-Day Comfort - Soft, breathable cushioned back panel for superior support.Built to Last - Durable nylon + polyester material stands up to daily use and travel.Balanced Support - Adjustable padded shoulder straps with chest buckle to reduce strain.Modern Interior Design - Stylish striped lining adds a sleek, professional finish.Sahara Multi-Compartment Travel & Laptop Backpack with USB Charging Port Whether you're commuting, traveling, or heading to class, the Sahara Multi-Compartment Laptop Backpack delivers a perfect blend of style, durability, and smart functionality.
Designed with precision and durability in mind, this case features a tough polycarbonate and TPU blend for long-lasting use without adding bulk. Perfect for professionals, students, or anyone on the go, this case provides full protection while maintaining a sleek, modern look..Designed for use with MacBook Pro 16" (2024) – Offers a snug, precise fit for reliable protection..Triple-hardened polycarbonate and TPU construction – Reduces stretching, yellowing, and adds structural integrity..Shock-absorbing reinforced corners – Helps shield your MacBook from damage due to accidental impacts..Form-fitting, lightweight design with textured anti-slip grip – Ensures comfortable handling and easy portability..Vented bottom panel and open port access – Promotes airflow and maintains full functionality without removing the case..SAHARA Limited Lifetime Replacement Warranty..The SaharaCase Hard Shell Case for MacBook Pro 16" (2024) is a premium protective solution crafted to safeguard your laptop from everyday bumps, drops, and scratches.
Designed with precision and durability in mind, this case features a tough polycarbonate and TPU blend for long-lasting use without adding bulk. Perfect for professionals, students, or anyone on the go, this case provides full protection while maintaining a sleek, modern look..Designed for use with MacBook Air 15" (2024) – Offers a snug, precise fit for reliable protection..Triple-hardened polycarbonate and TPU construction – Reduces stretching, yellowing, and adds structural integrity..Shock-absorbing reinforced corners – Helps shield your MacBook from damage due to accidental impacts..Form-fitting, lightweight design with textured anti-slip grip – Ensures comfortable handling and easy portability..Vented bottom panel and open port access – Promotes airflow and maintains full functionality without removing the case..SAHARA Limited Lifetime Replacement Warranty..The SaharaCase Hard Shell Case for MacBook Air 15" (2024) is a premium protective solution crafted to safeguard your laptop from everyday bumps, drops, and scratches.
Designed for professionals and students alike, this dual-purpose case safeguards your MacBook from daily damage while offering a built-in adjustable stand for ergonomic comfort. The frosted clear backing shows off your MacBook's sleek design, while the reinforced corners and durable materials deliver everyday protection..Designed for MacBook Air 13.6" (2024) – Ensures a perfect, secure fit for your device..Built-in adjustable stand – Enhances viewing angles and promotes better posture during long work sessions..Triple-hardened polycarbonate and rubber construction – Reduces yellowing, resists impact, and protects from scratches..Shock-absorbing reinforced corners – Offers drop protection from everyday accidents..Frosted clear back with black trim – Adds a premium look while showcasing the MacBook's original style..Form-fitting, lightweight design – Keeps your device protected without adding bulk..SAHARA Limited Lifetime Replacement Warranty..The SaharaCase Hard Shell Case with Stand for MacBook Air 13.6" (2024) combines rugged protection with elevated functionality.
Crafted for those who demand both protection and performance, this precision-fit case includes a built-in stand for ergonomic use and a reinforced shell with honeycomb texture for extra durability. The sleek gray finish pairs perfectly with any workspace setup while keeping your MacBook safe from life's mishaps..Designed for MacBook Pro 14" (2024) – Ensures a snug, secure fit with full access to ports and functions..Storm Gray finish with translucent textured backing – Offers a bold, modern look while showcasing the logo..Built-in adjustable stand – Elevates the laptop for better posture and airflow..Honeycomb-reinforced back panel – Adds strength and visual flair while diffusing impact..Triple-hardened TPU and polycarbonate build – Guards against drops, scratches, and wear..Shock-absorbing corners – Help minimize damage from accidental bumps and falls..Slim, form-fitting profile – Easy to slip into bags without bulk..SAHARA Limited Lifetime Replacement Warranty..Defend your device with rugged style using the SaharaCase Hard Shell Case with Stand for MacBook Pro 14" (2024) in Storm Gray.