Desk Boom Mic Stands

The Mount-It! height-adjustable speaker stand offers a maximum height of 40.8" and a minimum height of 30". Elevate and adjust your sound effortlessly with a simple height adjustment knob. The stand provides balanced sound resonance in any room, no matter what type of speakers you mount on. Features a 10 lb. weight capacity and can hold satellite speakers and bookshelf speakers. Compatible with most speaker brands: Bose, Sony, JBL, Harmon, and Kardon, and more. Four mounting options are available: single keyhole, single thread hole, two thread holes, two thread holes on speaker bottom. This satellite speaker stand helps turn any den or living room into an IMAX movie experience..This satellite speaker stand helps turn any den or living room into an IMAX movie experience.Dimensions: 30"-40.8"H x 8.8"W x 8.8"D.Made of steel and plastic in black.Compatible with most satellite or bookshelf speakers.Height-adjustable to suit any home theater environment.Provides a 9.9 lb. weight capacity.Sleek, modern design is engineered to reduce vibrations.Easily portable for a perfect surround sound setup.Versatile mounting options: single keyhole, single thread hole, two thread holes, two thread holes on speaker bottom

Say goodbye to visible cables and wandering mic pods. With a compact footprint and clever design details, the Logitech mic pod mount anchors Logitech Rally mic pods in place, provides a hidden path for cabling, and coils excess cable beneath the table. Mic pod mount gives meeting room tables a finished look while keeping connections secure, meeting after meeting. Use existing grommet holes or drill a new hole for preferred placement. A convenient cable spool eliminates excess cabling below the table..Designed for Rally mic pod this table mount anchors mics in place and offers cable management for a pro-quality installation.Comes in matte black finish.Dimensions: 3.54"H x 5.75"W x 5.75"D.Mic pod mount anchors mics and routes cables through grommet holes from 1" - 2.5" in diameter and adjusts to tables from 0.75" up to 2" thick.Fits most tables with grommet holes.Detachable cable spool organizes excess cabling below the table.Pack includes: mic pod mount, cable spool with mounting hardware, cable wrap, documentation.2-year manufacturer limited warranty

Using the Mount-It! speaker stand for your Sonos will keep your room looking minimal and cable-free. Featuring an intuitive press-fit cable management system built right in the stand, the speaker floor stand for Sonos instantly conceals any wires, so you can keep the party going all night long. The Sonos stand was precision-engineered using high-end steel and aluminum, making the stand durable, wobble-free, and sturdy. The base and stand hold your speakers up 28" from the ground, inherently enhancing its surround sound capabilities. And unlike other Sonos playstands, this Sonos stands is easy to install. Simply connect the base to the stand, place your speaker on the top platform, and start streaming your favorite playlist..Speaker stand will keep your room looking minimal and cable-free.Dimensions: 28.2"H x 9.8"Dia..Made of heavy-duty high-end steel and aluminum in black.Compatible with Sonos 1/One SL/Play:1 speakers.Large cable management holes make obscuring wires easy.Simply connect the base to the stand, place your speaker on the top platform, and start streaming your favorite playlist.Supported by manufacturer's limited lifetime warranty

Lights, camera, action. No need for the DIY setups you've used in the past. The Mount-It! All-in-One studio single mount is a fully-loaded streaming set that can hold one monitor, video camera, ring light and has an extendable mic arm, making you look and sound like the professional you are. Each arm has a full range of motion so that you can raise, lower, tilt, and swivel it into the perfect position. The stainless steel construction and reinforced steel base protect your investment, keeping your devices secure at all times..Studio single mount is a fully loaded streaming set that can hold one monitor, video camera, ring light and has an extendable mic arm.Offers a single-monitor mount, fits 17"-32" monitors.Each arm has a full range of motion so that you can raise, lower, tilt, and swivel it into the perfect position.Made of sturdy, durable steel in black.Monitor tilt angle: +/-70 degrees; camera tilt angle: +/-90 degrees.Compatible VESA patterns: 75 x 75mm and 100 x 100mm.Each connecting bracket has an ergonomic handle, so you can easily position your devices how you like, even while you're streaming.Supported weight: monitor up to 19.8 lbs.; camera up to 15.4 lbs.; microphone up to 2.2 lbs.; light up to 15.4 lbs..Full arm extension: 15.7".Stainless steel construction and reinforced steel base protect your investment, keeping your devices secure at all times.Supported by manufacturer's limited lifetime warranty

This versatile, multifunction Mount-It! tablet pole mount features a special C-clamp base that mounts to both tabletops and poles. Use it to hold your tablet or iPad next to your computer screen for a smooth workflow or on a microphone stand as a music tray. This tablet/phone holder features two ball joints and a middle swivel joint for full-motion capabilities to perfect the positioning of your tablet or phone..Universal tablet pole and desk mount are great for microphone stands, wheelchairs, tripods, treadmills, exercise equipment, tabletops, and more.Compatible with iPads, cell phones, Galaxy tablets, Fire tablets, and other tablet models with 6" to 14" screens.Made of aluminum and comes in black.Clamps to both tabletops and poles.Features a convenient full-motion dual-arm design.Supports 180-degree tilt, 360-degree swivel, and 360-degree rotation.Arm length: 16.5".Clamp range: 0.5" to 2".Tablet holder dimensions 8.3" x 11.8".Capacity: 3.3 lbs..Supported by manufacturer's limited lifetime warranty

The MI-2751 transforms your desk into a more comfortable and ergonomic environment with the help of this monitor mount. Not only will you raise your screen to comfortable viewing levels, you will also free up a lot of desk space that you can use for other supplies and accessories such as laptops or notepads. Raising the monitor higher with this monitor mount improves your posture and provides ergonomic and healthy set up. Raising the monitor also saves valuable desktop space. The arm and pole has cable management clips to keep the power and HDMI cables tidy..MI-2751 is compatible with 75mm x 75mm, 100mm x 100mm VESA patterns and can hold up to 22lbs.Adjustable arm swivels 180 degrees, 360 rotation between landscape and portrait. Tilts 90 degrees.Heavy-duty clamp or grommet base easily attaches to your desk or tabletop.The arm and pole has cable management clips to keep power and HDMI cables tidy.The arm is height adjustable on the pole, up to 18".Supported by manufacturer's limited lifetime warranty.The MI-2751 monitor arm mount holds a monitor up to 32”/22 lbs.

Rotate, tilt, swivel and adjust monitors by using this stand, and create an optimized workspace that is personalized for each employee. This Mount-It! stand is designed to support 13 to 24-inch monitors and is ideal for most desktops..Raise your monitor to a comfortable viewing height with this monitor arm.Supports up to 24" monitors for versatile use.Made of metal for durability.-15 to 15 degrees tilt, 360 degrees pan, and 360 degrees rotation adjustment options enable for optimal viewing.Compatible with the standard VESA mounting patterns: 100 x 100, 75 x 75.Black finish adds to its overall aesthetic appeal.Supported by manufacturer's limited lifetime warranty.Increase productivity while reducing desktop clutter by using this Mount-It! dual monitor desk stand.

MI-33111-BLK single monitor desk mount features a single articulating arm with smooth, full motion adjustments including height, tilt, swivel and rotation. This desk mount is designed to position your monitor perfectly for a healthier, more comfortable way to work throughout the day. Save desk space while improving posture by elevating your monitor off of the desk to eye level. This premium single monitor mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add or remove monitor-mounting arms, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The grommet base easily attaches to any desk up to 3.5” thick, making it an easy addition to any workspace. Fits monitors up to 32” with a weight capacity of 19.8lbs..Max Screen Size 30 inches.360 degree swivel.Extension 16 inches.Height adjustable 8 inches.Load Capacity 28 lbs..Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.Supported by manufacturer's limited lifetime warranty.Monitor Mount

Lights, camera, action. No need for the DIY setups you've used in the past. The Mount-It! All-in-One studio dual mount is a fully-loaded streaming set that can hold two monitors, video camera, ring light and has an extendable mic arm, making you look and sound like the professional you are. Each arm has a full range of motion so that you can raise, lower, tilt, and swivel it into the perfect position. The stainless steel construction and reinforced steel base protect your investment, keeping your devices secure at all times..Studio dual mount is a fully loaded streaming set that can hold two monitors, one video camera, one ring light and has an extendable mic arm.Offers a dual-monitor mount, fits 17"-32" monitors.Each arm has a full range of motion so that you can raise, lower, tilt, and swivel it into the perfect position.Made of sturdy, durable steel in black.Monitor tilt angle: +/-70 degrees; camera tilt angle: +/-90 degrees.Compatible VESA patterns: 75 x 75mm and 100 x 100mm.Each connecting bracket has an ergonomic handle, so you can easily position your devices how you like, even while you're streaming.Supported weight: two monitors up to 19.8 lbs. each; camera up to 15.4 lbs.; microphone up to 2.2 lbs.; light up to 15.4 lbs..Full arm extension: 15.7".Stainless steel construction and reinforced steel base protect your investment, keeping your devices secure at all times.Supported by manufacturer's limited lifetime warranty

The Mount-It! MI-SB434 adjustable speaker wall mount is perfect for your Sonos speaker and creates the optimal sound experience. Place your speaker where you can fully enjoy its sounding and the sleek low-profile design the mount offers. The simple design won't cause distraction, and you can enjoy a clutter-free living space. The mount is easy to adjust to create a custom listening experience by tilting or swiveling the speaker as needed..Adjustable speaker wall mount creates a great sound experience.Made of steel, aluminum, and plastic in black.Compatible with Sonos 1/One SL/Play:1 speakers.Tilt and swivel your speaker to find the right angle for sound.Sleek low-profile design will complement any space.Adjustable mount helps enhance your sound experience.Tilt: 18 degrees.Swivel: 45 degrees.Supported by manufacturer's limited lifetime warranty

Computer-related injuries have widely existed caused by long-term use of computer. Reduce strain injury and create a more comfortable working environment with Mount-It! ergonomic desk armrest. Ergonomically designed to support the weight of your arm and elbow reducing pressure and strain on neck, shoulder, and wrist. Features adjustable height to adjust for any sitting posture. Full-motion capability allows you to move freely while using the mouse or keyboard. Easy to install, no tools required..Experience the ergonomic comfort with this armrest for desk.Comes in black and made of assorted materials.Optimize the position of your arm, move freely and comfortably in all directions with full-motion swivel.Reduces strain injuries and creates a more comfortable working environment.Features 4" of height adjustment with five settings, free motion feature, and three swivel points.Easy-to-install armrest securely clamps to desktops between 0.3" and 2.63".Supported by manufacturer's limited lifetime warranty

Radius III is a vintage-style suspension mount designed to isolate Yeti and Yeti Pro USB microphones from noise, shock and ambient vibration. Radius III features a new streamlined, lighter weight design, perfect for on-camera streaming. Custom designed for the Yeti and Yeti Pro microphones, Radius III is compatible with standard microphone stands and also works with virtually any microphone or mic clip that has a standard thread mount..Elevate your audio recordings with Radius III custom shockmount to shield your microphone from background noise, improving the sound quality of podcasts, Twitch streaming, voiceovers and broadcasts.This universal mic shockmount cradles the mic in style and features a new streamlined, lightweight design made for live streaming on camera.Designed for Yeti and other professional broadcast mics, pair Radius III shockmount with the Yeti mic and the Compass boom arm (sold separately) for a professional home studio broadcast setup.

This single arm monitor wall mount helps clear out your desktop space and raise your monitor for a more ergonomic installation. Raising monitors to eye level helps prevent common issues such as neck, back pain, and eye strain. We utilized the best gas spring components available in the market to make the height adjustment fluid and easy. The tension on the gas spring can be increased or decreased to the adjust the amount of counterbalance for the weight of your monitors - allowing fingertip height adjustment. The full motion design allows tilt up and down, swivel left and right, as well as the ability to push the monitor towards the wall or extend them away from the wall. You can position the monitor exactly as you wish. The slide-in VESA plate allows you to install the wall mount to the wall, connect the plates to your monitor and slide the monitor into the wall mount with easy..Single Monitor Wall Mount fits most of 13"-32" Screens.Tilt, Swivel, Full Motion and Height Adjustable Features.Each monitor can tilt up 90 degrees or down 45 degrees and rotates 180 degrees.Distance From the Wall: 3.5"es min, 17.7"es max.Load capacity 14.3 lbs..Supported by manufacturer's limited lifetime warranty

Upgrade your workstation and install your monitor at the proper height to improve posture and comfort. Adjust your screen position to improve functionality and efficiency. The articulating arm features 3 pivot points for a full range of motion. Retract, extend, tilt, and swivel to create the perfect computer or TV setup. Let your computer monitor adapt to your height and to your working style with this wall mount..MONITOR WALL MOUNTS allow you to clear valuable desktop space and to improve your posture by raising your monitor to eye level..FULL MOTION design allows you to adjust your monitor / TV to fit your viewing needs. Swivel / articulate 180 degrees, tilt up and down 15 degrees to reduce glare. Monitor can be installed either in portrait or landscape position. Tightening knob allows you to keep the display firmly in place or loosen to adjust more frequently..WALL MOUNT FOR SINGLE MONITOR set up fits most monitors in the market with the standard VESA patterns of 75x75 and 100x100. It will fit screens up to 30 inches if the monitor VESA pattern is compatible and weighs no more than 33 lbs..SIMPLE INSTALLATION, comes with everything you’ll need to securely mount your screen to a wood stud, concrete or brick wall. HEAVY-DUTY MATERIAL made from premium cold-rolled steel..Wall plate measures 1.75" W x 6" L.Supported by manufacturer's limited lifetime warranty.The MI-404 full motion wall mount allows to you clear desktop space and improves your posture by raising your monitor to eye level

Create your perfect immersive gaming station or a professional multiscreen desk setup with this Mount-It! desk mount for monitors with screen size up to 49" and weight up to 44 lbs., such as Samsung Odyssey G9 and LG 49" UltraWide Dual QHD. The mount's optimized heavy-duty tilting and gas spring mechanisms allow for smooth and stable adjustment of large screens. The full-motion design enables you to lower and raise, swivel, tilt, and rotate your screens to achieve the perfect viewing height and angle. To fully immerse in your game, this mount features RGB lighting along the arms and on the base: simply switch between 20 different modes by pressing the easily accessible RGB mode button on the base. Both, a clamp and grommet mount are included for easy installation on your desk. The detachable VESA plate with 75 x 75 and 100 x 100 hole patterns allows for quick installation of your monitors, and the integrated cable management ensures neat and organized cable routing along the arms..Create your perfect immersive gaming station with this heavy-duty single monitor arm.Fits one ultrawide and/or curved screen up to 49" and 44 lbs., such as Samsung Odyssey G9 and LG 49" UltraWide Dual QHD IPS Curved.Height-adjustable from 8.54" to 19.68".Made of aluminum and steel in a combination of grayish white and matte black finishes.Full-motion design with a 360-degree screen rotation, 180-degree swivel, and tilt up to +50/-20 degrees ensures you get the optimal viewing angle.Base dimensions: 5.5"W x 4.5"D.Compatible with 75 x 75 and 100 x 100 VESA patterns.Powerful gas spring arms offer a smooth and stable adjustment with a maximum extension of 18".Integrated USB-powered RGB lighting with 20 different effects enhances any gaming station.Built-in cable management allows you to route the cable underneath the arm for a clean and organized workspace.Extra-sturdy clamp and grommet mounting options included (recommended tabletop thickness: 0.39"-3.34" for clamp and 0.39"-1.88" for grommet).1-year manufacturer limited warranty

Mount-It! MI-7853A is a versatile stand that can be used for laptops, monitors, or printers. The large platform is wide enough for most office printers and monitors. Customize the height with the stacking columns for a more comfortable working environment, and improve ergonomics by raising your monitor. The included drawer gives you more space to store paper or other supplies for quick access. Nonskid EVA foam feet will help protect your desktop surface and securely hold your equipment in place..Stand can support most laptops or monitors on the market.Comes in black and made of plastic.Included drawer gives you additional organizational space.Dimensions: 5.13"H x 17.13"W x 13.27"D.Features handy cable management that keeps cords under control.Supports up to 22 lbs..Supported by manufacturer's limited lifetime warranty