Ethernet Cable for Security Cameras

Establish your high-performance network connections with this CAT-6 Network Patch Cable from Intellinet Network Solutions. It supports up to 10-Gbps data transmissions with frequencies up to 250 MHz and all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE. This stranded cable offers all the benefits of a standard CAT-6 network cable, but with a diameter that's considerably smaller. In dense cable installations, the cable creates a tidier and more-organized look, and its thinner size helps promote better air circulation to equipment in a network cabinet. As opposed to other cables that are manufactured with copper-clad aluminum (CCA) or even copper-clad steel (CCS), this cable contains 100% pure bare copper, making it ideal for use in PoE applications. Gold plating on the contacts makes them corrosion-resistant in every environment. The cable plugs are equipped with an extra-long boot that is extremely flexible and bendable for the best strain relief in cable runs around corners and in tight spaces. This is a pack of 10..10 pack.CAT-6 cable with 10 Gbps/1 Gbps and 250 MHz in accordance with ISO/IEC 11801 and EN 50288.Pure bare copper wire for maximum conductivity.Gold-plated contacts for corrosion-free connections.Ultra-thin format for more flexibility and simplified cable management in dense installations.Flexible connector covers to protect RJ45 plugs and allow the thin cable to be easily bent to the desired angle.Ideal for HDBaseT and PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE.Heavy-duty strain relief.Compatible and color-coded with T568A and T568B (sold separately).Standard 8P8C design, compatible with all network RJ45 connections.Fully backward compatible with previous cable categories, including CAT-5e and 5.Lifetime warranty

Electronic Master CAT6211000B 1000-feet UTP CAT6 Network Cable is professional-quality cable with 24 gauge copper clad aluminum conductor, polyolefin insulation and 4 unshield-twisted-pairs(UTP). This can maxima the cable length you can run and guaranteed better signal quality with low impedance cable..Professional quality cable with 24 AWG copper clad aluminum conductor.Maxima the cable length you can run and guaranteed better signal quality.Polyolefin insulation and 4 unshielded twisted pairs.Delivers reliable performance.Manages to take minimal wall space with its soft and flexible external jacket.Deliver optimum conductivity while eliminating signal loss due to oxidation.High speed transfer rate.Support power over Ethernet.RoHS Compliant

Establish your high-performance network connections with this CAT-6 Network Patch Cable from Intellinet Network Solutions. It supports up to 10-Gbps data transmissions with frequencies up to 250 MHz and all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE. This stranded cable offers all the benefits of a standard CAT-6 network cable, but with a diameter that's considerably smaller. In dense cable installations, the cable creates a tidier and more-organized look, and its thinner size helps promote better air circulation to equipment in a network cabinet. As opposed to other cables that are manufactured with copper-clad aluminum (CCA) or even copper-clad steel (CCS), this cable contains 100% pure bare copper, making it ideal for use in PoE applications. Gold plating on the contacts makes them corrosion-resistant in every environment. The cable plugs are equipped with an extra-long boot that is extremely flexible and bendable for the best strain relief in cable runs around corners and in tight spaces. This is a pack of 10..10 pack.CAT-6 cable with 10 Gbps/1 Gbps and 250 MHz in accordance with ISO/IEC 11801 and EN 50288.Pure bare copper wire for maximum conductivity.Gold-plated contacts for corrosion-free connections.Ultra-thin format for more flexibility and simplified cable management in dense installations.Flexible connector covers to protect RJ45 plugs and allow the thin cable to be easily bent to the desired angle.Ideal for HDBaseT and PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE.Heavy-duty strain relief.Compatible and color-coded with T568A and T568B (sold separately).Standard 8P8C design, compatible with all network RJ45 connections.Fully backward compatible with previous cable categories, including CAT-5e and 5.Lifetime warranty

Establish your high-performance network connections with this CAT-6 Network Patch Cable from Intellinet Network Solutions. It supports up to 10-Gbps data transmissions with frequencies up to 250 MHz and all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE. This stranded cable offers all the benefits of a standard CAT-6 network cable, but with a diameter that's considerably smaller. In dense cable installations, the cable creates a tidier and more-organized look, and its thinner size helps promote better air circulation to equipment in a network cabinet. As opposed to other cables that are manufactured with copper-clad aluminum (CCA) or even copper-clad steel (CCS), this cable contains 100% pure bare copper, making it ideal for use in PoE applications. Gold plating on the contacts makes them corrosion-resistant in every environment. The cable plugs are equipped with an extra-long boot that is extremely flexible and bendable for the best strain relief in cable runs around corners and in tight spaces. This is a pack of 10..10 pack.CAT-6 cable with 10 Gbps/1 Gbps and 250 MHz in accordance with ISO/IEC 11801 and EN 50288.Pure bare copper wire for maximum conductivity.Gold-plated contacts for corrosion-free connections.Ultra-thin format for more flexibility and simplified cable management in dense installations.Flexible connector covers to protect RJ45 plugs and allow the thin cable to be easily bent to the desired angle.Ideal for HDBaseT and PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE.Heavy-duty strain relief.Compatible and color-coded with T568A and T568B (sold separately).Standard 8P8C design, compatible with all network RJ45 connections.Fully backward compatible with previous cable categories, including CAT-5e and 5.Lifetime warranty

Establish your high-performance network connections with this CAT-6 Network Patch Cable from Intellinet Network Solutions. It supports up to 10-Gbps data transmissions with frequencies up to 250 MHz and all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE. This stranded cable offers all the benefits of a standard CAT-6 network cable, but with a diameter that's considerably smaller. In dense cable installations, the cable creates a tidier and more-organized look, and its thinner size helps promote better air circulation to equipment in a network cabinet. As opposed to other cables that are manufactured with copper-clad aluminum (CCA) or even copper-clad steel (CCS), this cable contains 100% pure bare copper, making it ideal for use in PoE applications. Gold plating on the contacts makes them corrosion-resistant in every environment. The cable plugs are equipped with an extra-long boot that is extremely flexible and bendable for the best strain relief in cable runs around corners and in tight spaces. This is a pack of 10..10 pack.CAT-6 cable with 10 Gbps/1 Gbps and 250 MHz in accordance with ISO/IEC 11801 and EN 50288.Pure bare copper wire for maximum conductivity.Gold-plated contacts for corrosion-free connections.Ultra-thin format for more flexibility and simplified cable management in dense installations.Flexible connector covers to protect RJ45 plugs and allow the thin cable to be easily bent to the desired angle.Ideal for HDBaseT and PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE.Heavy-duty strain relief.Compatible and color-coded with T568A and T568B (sold separately).Standard 8P8C design, compatible with all network RJ45 connections.Fully backward compatible with previous cable categories, including CAT-5e and 5.Lifetime warranty

Use this CAT-6 Network Patch Cable from Intellinet Network Solutions® to set up your high-performance network connections. It supports all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE and up to 10-Gbps data communications at frequencies up to 250 MHz. With a much smaller diameter than a normal CAT-6 network cable, this stranded cable nonetheless provides all the features. It gives a network cabinet's equipment a neater, more organized appearance in dense cable installations, and its smaller size helps improve air circulation. Because of its smaller size and increased flexibility, the cable is an excellent option for installations in confined spaces and around corners. This cable is appropriate for PoE applications since it is made entirely of pure bare copper, unlike other cables that are made of copper-clad aluminum (CCA) or even copper-clad steel (CCS). The contacts' gold coating protects them from corrosion in all types of environments. All of Intellinet Network Solutions' patch cables are the ideal option for high-density settings like data centers and server rooms because of their snag-free boot design. It is simple to connect and disconnect the cable plugs securely without breaking the latch thanks to strain relief and a molded boot for safety..10 pack, with each cable 20-ft. long.CAT-6 with 10G/1G and 250 MHz in accordance with ISO/IEC 11801 and EN 50288.Pure bare copper wire for maximum conductivity.Gold-plated contacts for corrosion-free connections.Snag-free boots to smoothly and easily pull the cable without damaging the RJ45 connectors.Ultra-thin format for more flexibility and simplified cable management in dense installations.Ideal for HDBaseT and PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE.Heavy-duty strain relief.Compatible and color-coded with T568A and T568B.Standard 8P8C design, compatible with all network RJ45 connections.Fully backward compatible with previous cable categories, including CAT-5e and 5.Lifetime warranty

Cat5e snagless network patch cable for fast Ethernet network, requiring bandwidth-intensive voice, data/video distribution applications..Cat5e snagless network patch cable for fast Ethernet network, requiring bandwidth-intensive voice, data/video distribution applications.Cable length: 7'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.FR-PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, ANSI/TIA-568-C-2 standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in gray color.Data transfer rate: 1000 Mbps.Diameter: 5.3 mm OD jacket, 0.95 + 0.05 mm insulation, thickness: 0.55 mm jacket.Voltage rating: 30 V, Dielectric strength: 500 MV/m.Resistance: 89 ohm/km (maximum) DC conductor, 100 ohm/km (minimum) insulation.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-Any LAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice.Weight: 0.17 lbs..Comes with lifetime warranty

Connect this Ethernet cable to a modem or router for solid networking on any RJ45-compatible device. The gold-plated contacts and a snagless cable boot on this Monoprice Ethernet cable provide an excellent connection to devices..Flat unshielded twisted pair Ethernet cable, category 5e.Cable length: 14'.Cable has RJ45 male connectors on both ends.Each conductor 30AWG.Pure bare copper conductors.Meets or exceeds UL 444, TIA-568-C.2 standards.Gold-plated connectors on both sides for easy connectivity, lower signal loss, and higher resistance to corrosion.Comes in black color.Snagless cable boot protects the plug retaining clip.Lifetime manufacturer limited warranty.Plug in this Monoprice CAT-5e Ethernet cable and improve the stability of network connections.

The C2G ® 14' black Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 14'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.4 lbs..Comes with lifetime warranty

The C2G ® 3' red Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable with PVC jacket truncates both impedance and structural return loss. This cable, with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. The patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 3'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.11 lbs..Comes with lifetime warranty

Constructed of top quality materials, 4XEM Cat5e solid twisted pair bare wire cable is designed for high performance networking applications. Cut lengths to meet your exact needs. Rated for 350MHz/1Gbps communication, this network cable meets and exceeds current industry standards including IEEE 802.3ab, IEEE 802.5 ANSI/EIA/TIA 568, ISO/IEC 11801 and ETL. Lifetime warranty. Connect with the best - 4XEM. 4XEM gear is respected industry wide for its high performance, premium quality and durability..Features Category 5e cable type.Features Bare Wire connector to let you worry-free about setting up a connection with a network device.Cable Length: 1000 ft

The C2G ® 5' gray Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cable length: 5'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Comes in gray color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.16 lbs..Comes with lifetime warranty.Contact material: 50 micron gold-plated copper alloyCompatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Weight: 0.16 lbs..Comes with lifetime warranty

The C2G Cables to Go CAT-6 snagless unshielded (UTP) slim network patch cable is the perfect solution for high-density data center applications. The use of 28 AWG conductors allows for a 36% reduction in diameter over a standard CAT-6 network patch cable. This reduced diameter provides a smaller cable surface area which allows for increased airflow when compared to standard CAT-6 cables. The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables. The small size and small bend radius of this cable allow it to be easily routed through cable management panels..CAT-6 snagless unshielded (UTP) slim Ethernet network patch cable designed for fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications.Cable length: 7'.Features an RJ45 (male) connector on each end.Constructed from high-quality copper cable and features a durable PVC jacket; comes in black.The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables.36% reduction in diameter compared to standard Cat5e cables.28 AWG cable is perfect for crowded spaces inside a rack unit or limited spaces.Meets the ANSI/TIA-568-C.2 standard for patch cord performance.Lifetime limited manufacturer warranty

The Comprehensive Cat6 snagless patch cable of 100' long, is suitable for distributing voice, video and data on high speed Ethernet and Gigabit networks at 350 MHz bandwidth. This RJ-45 male to RJ-45 male cable in white, has molded snagless boots that offer quick and easy installation while assuring superior strain relief. The 4 twisted pair cable has 24 AWG bare copper stranded wire for good conductivity. It has a PVC jacket that offers protection against severe damage. The cable has gold-plated contacts for good transmission ability..Cable length: 100'.Connections: RJ45 male on first end to RJ45 male on second end.Durable polycarbonate connector, copper alloy plated with 50u gold contact for good connectivity and polyvinyl chloride jacket for protection.Meets all Cat5E TIA/EIA, EIA/TIA 568B.2 and RoHS standards.Good performance.Comes in white color.Supports voice/data/video distribution applications up to 350 MHz.Network device supportable.Conductors: 4 Twisted pairs 24 AWG bare copper stranded cable.Has 89 Ohm/km maximum conductor DC resistance and 100 Ohm/km minimum insulation resistance.Weight: 1.5 lbs..Comes with lifetime limited warranty.Network Patch cable with molded low profile snagless boot makes installing quick and easy.

C2G® CAT5E UTP Patch cable in blue color connects network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other networking equipments. The 25' cable is made of flexible as well as fire retardant PVC to ensure maximum bending and to prevent any fatal fire accident. H-D PE shielding on 24 AWG conductors secure data from electromagnetic and radio frequency interference. Twisted pair design of the cable conductors minimizes crosstalk and attenuation for clear signal transmission. Gold-plated connectors prevent signal loss due to oxidation or corrosion. Snagless design of the RJ45 male-to-male connector prevents wear and tear during installation. Suitable for application involving voice, data and video distribution in Ethernet network..Enhanced Category 5 high-speed cabling to distribute data, voice and video.These cables will handle bandwidth intensive applications up to 350 MHz and beyond.Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 MHz wire.1 x RJ-45 Male Network to 1 x RJ-45 Male Network

The C2G ® 1' orange Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cable length: 1'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in orange color.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.05 lbs..Comes with lifetime warranty.Comes with lifetime warranty

The C2G Cables to Go CAT-6 snagless unshielded (UTP) slim network patch cable is the perfect solution for high-density data center applications. The use of 28 AWG conductors allows for a 36% reduction in diameter over a standard CAT-6 network patch cable. This reduced diameter provides a smaller cable surface area which allows for increased airflow when compared to standard CAT-6 cables. The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables. The small size and small bend radius of this cable allow it to be easily routed through cable management panels..CAT-6 snagless unshielded (UTP) slim Ethernet network patch cable designed for fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications.Cable length: 10'.Features an RJ45 (male) connector on each end.Constructed from high-quality copper cable and features a durable PVC jacket; comes in blue.The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables.36% reduction in diameter compared to standard Cat5e cables.28 AWG cable is perfect for crowded spaces inside a rack unit or limited spaces.Meets the ANSI/TIA-568-C.2 standard for patch cord performance.Lifetime limited manufacturer warranty

For fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data, or video distribution applications. Meets all CAT-6 TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL). Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation..CAT-6 snagless unshielded (UTP) ethernet network patch cable is designed for network adapters, hubs, switches, routers, HDBaseT applications, and more.Cable length: 5'.Features an RJ45 (male) connector on each end.Constructed from high-quality copper cable and features a durable PVC jacket; comes in blue.Snagless connector design for high density environments and protecting the RJ-45 connector's lock.Supports 10 Gigabit networks up to 180' for fast data transmission and maximum performance and supports 1 Gigabit up to 328'.Constructed with unshielded twisted pair (UTP) wires, designed to counter EMI, RFI, and crosstalk.Meets all CAT-6 TIA/EIA requirements for supporting a wide variety of applications.50 cables per pack.Lifetime limited manufacturer warranty

Connect your computer system to a router, switch or hub with the Monoprice CAT-6 Cable that offers reliable Ethernet connectivity. Both ends of this networking cable play host to RJ-45 male connectors for seamless connection between devices. It has a durable and good-quality jacket that preserves the integrity of the high-quality copper conductor..CAT-6 for seamless connection over a network.Designed to transmit data at 1100 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.The Monoprice 2' CAT-6 Ethernet Network Cable, Gray, is ideal for 10 Gigabit Ethernet networks and provides dependable data transfer.