Extractor Drill Bit

Unibit® Hex shank HSS #2 self starting step drill bit with 3/16 - 1/2" Dia includes 1 number of flutes and hexagonal shank. Bit with 1/4" Dia shank is ideal for drilling holes into thin materials..Bit diameter: 3/16 - 1/2 in by 1/16 in increments.Shank type: Hexagonal.Shank diameter: 1/4 in.Number of flutes: 1.Single-flute cutting edge for greater control through steps.Hex shank prevents slipping in drill chuck.Also available with (TiN) coating for longer life.New SpeedPoint tip penetrates faster than previous Unibits and prevents walking.Ideal for drilling holes into thin materials such as stainless steel, copper, brass, aluminum, plastic and laminates.Unibit® Hex Shank HSS #2 Self Starting Step Drill Bit, 3/16 - 1/2 in By 1/16 in: It is made of tough steel for maximum life.

Irwin® Reduced shank drill bit set features high speed steel construction with black/gold oxide finish for enhanced durability and corrosion resistance. Drill bit set contains bits of dia 1/16" - 1/2" and 135 deg split point tip for clean drilling..Material: High Speed Steel.Point: 135 deg split.Oxide treatment resists corrosion, helps prevent bit from rusting.Turbomax tip starts up to 10x faster.Flatted shanks above 11/64" eliminates slippage in drill chuck.Reduced shank above 3/8" allows the use of larger drill bits in a 3/8" chuck.Rubber overmolded case protects kit if dropped.Tap & drill selection chart for convenient reference.Automatic indexing for easy bit access and identification.Removable cartridges: easy to carry bits from case to worksite.Sizes include 1/16" to 1/2" in 1/64" increments.Shank diameter: 1/16 - 1/2".Lifetime warranty..Irwin® Reduced Shank HSS Black and Gold Metal Index Drill Bit Set has drill bits with sizes ranging from 1/16" - 1/2" in 1/64" increments and come in black and gold oxide finish.

HANSON® Straight shank cobalt HSS jobber length drill bit with 1 3/8" flute offers super abrasive resistance in tough metals. Bit with 1/4" Dia has shorter cutting lips that reduce torque for drilling in high tensile strength materials..Type: Series 3016/631, jobber length.Bit diameter: 1/4 in.Shank type: Straight.Flute length: 1 3/8 in.Overall length: 2 1/2 in.Constructed of M-35 5 percent cobalt high speed steel for super abrasive resistance in tough metals.Produces faster chip ejection.Shorter cutting lips reduce torque for drilling in high tensile strength materials.135 deg split point reduces feed pressure for easier penetration without working hard.Applicable materials: Hard steel, stainless steel and titanium.HANSON® Straight Shank AU2O3 Cobalt HSS 3016/631 Jobber Length Drill Bit comes with heavy-duty spiral flute design.

Irwin® Straight shank grade heavy duty drill bit set features cobalt high speed steel construction for toughness and enhanced durability. Drill bit set contains bits of dia 1/16" - 3/8" and has 135 deg split point tip to offer smooth/clean drilling..Type: Grade heavy duty, jobber length.Bit diameter: 1/16 - 3/8 in.Shank type: Straight.Material: Cobalt high speed steel.Point angle: 135 deg.Constructed of M-42 8 percent cobalt high speed steel for super abrasive resistance in tough metals.135-deg split point reduces feed pressure for easier penetration without work hardening.Available with a variety of drill bit types and piece count configurations; Meets National Aerospace Standards (NAS) 907, Type J.Usage for high temperature alloys, hi-tensile malleable cast iron, stainless steel, titanium alloys and unalloyed nickel.Includes (2) 1/16 in, 5/64 in, (2) 3/32 in, 7/64 in, (2) 1/8 in, 9/64 in, 5/32 in, 3/16 in, 7/32 in, 1/4 in, 5/16 in and 3/8 in.Durable rubber-sided case for added impact resistance.Available with a variety of drill bit types and piece count configurations.Meets National Aerospace Standards (NAS) 907, Type J.Irwin® Cobalt HSS 15 pcs Drill Bit Set has a sliding latch design.

HANSON® Straight adjustable handle 1/2" tap with reamer wrench provides greater leverage for larger diameter tapes. Handle with solid construction is designed for use with taps, reamers, screw extractors and other tools with a square shank..Tap size: #0 - 1/2 in.Handle type: Straight adjustable.Straight handle design provides greater leverage, especially when using larger diameter tapes.Designed for use with taps, reamers, screw extractors and other tools with a square shank.Solid construction for long life and ease of use.HANSON® Straight Adjustable Handle Tap And Reamer Wrench is designed for use with taps, reamers, screw extractors and other tools with a square shank.

Irwin 4 Piece Pro Plier Set contains 6" long nose pliers, a 10" adjustable wrench, a storage tray, and 6" slip joint pliers. It comes with ProTouch grips that provide extra comfort and reduce hand fatigue..Type: Pro Plier Set.Color: Blue.Weight: 3.5 lbs..Features: ProTouch™ Grips Provide Extra Comfort and Reduces Hand Fatigue.Includes: 6". Long Nose Pliers, 10". Adjustable Wrench, Storage Tray, 6". Slip Joint Pliers.Irwin 4 Piece Pro Plier Set - Contains 6" long nose pliers, a 10" adjustable wrench, a storage tray, and 6" slip joint pliers

VISE-GRIP® 6" Nickel chromium steel slip joint plier is made of nickel chromium steel material for durability. Plier features plain handle for comfort..Type: Slip joint.Size: 1 1/8 in jaw length x 1 5/32 in jaw width x 7/16 in jaw thickness.Length: 6 in.Handle type: Plain.Material: Nickel chromium steel.ProTouch™ grips provide extra comfort and reduces hand fatigue.Induction hardened cutting edge stays sharper with longer life.Machined jaws for maximum gripping strength.With wire cutter.VISE-GRIP® Nickel Chromium Steel Slip Joint Plier has induction hardened cutting edge that stays sharper with longer life.

HANSON® Spiral flute screw extractor set includes 6 different size tools that are used to remove broken studs or bolts. Metal case set contains tools with aggressive left hand spiral design for better grip..Designed to remove broken studs, bolts, socket screws and fittings.Aggressive left hand spiral design for extra gripping power.Spiral flutes are designed to get embedded deeper into the metal as you turn the tool. As the fastener resistance increases, the extractor's grip increases.Extractor size and recommended drill bit size are etched on each tool.Includes: spiral EX-1 - EX-6.Spiral bites into harder materials with increasing.Flutes embed deeper with each turn.Drive tool: Tap wrench, wrench, socket wrench, VISE-grip Locking pliers, IRWIN tap adaptors.HANSON® 535 Spiral Flute Screw Extractor Set features spiral design for extra gripping power.

VISE-GRIP® Chrome vanadium steel adjustable wrench of size 1" measures 6" and provides a better grip on worn, rounded fasteners. Wrench is designed for easy access in close parallel lines..Size: 1 in opening.Length: 6 in.Material: Chrome vanadium steel.Specification: ANSI.ProTouch™ grips provide extra comfort and reduces hand fatigue.Hang hole for easy wall storage.Extra wide capacity.Measuring System: Inch, Metric.VISE-GRIP® Chrome Vanadium Steel Adjustable Wrench has extra wide capacity, and grips to provide extra comfort.

VISE-GRIP® Chrome vanadium steel adjustable wrench of size 1 1/8" measures 8" and provides a better grip on worn, rounded fasteners. Wrench is designed for easy access in close parallel lines..Size: 1 1/8 in opening.Length: 8 in.Material: Chrome vanadium steel.Specification: ANSI.ProTouch™ grips provide extra comfort and reduces hand fatigue.Hang hole for easy wall storage.Extra wide capacity.Measuring System: Inch, Metric.VISE-GRIP® Chrome Vanadium Steel Adjustable Wrench has extra wide capacity, and grips to provide extra comfort.

VISE-GRIP® 2 Piece chrome vanadium steel adjustable wrench set measures 10" and provides a better grip on worn, rounded fasteners. Wrench is designed for easy access in close parallel lines..Length: 6 in, 10 in.Material: Chrome vanadium steel.Specification: ANSI.Number of piece: 2.ProTouch grips provide extra comfort and reduces hand fatigue.Machined jaws for maximum gripping strength.Professional-grade tools.Induction hardened cutting edge stays sharper, longer.VISE-GRIP® 2 pcs Chrome Vanadium Steel Adjustable Wrench Set comes with machined jaws for maximum gripping strength.

VISE-GRIP® The Original™ 7" Alloy steel locking pinch-off tool features plain handle for comfort. Tool has guarded release trigger that quickly unlocks and protects from accidental release..Type: Locking.Length: 7 in.Throat depth: 1 in.Tip type: Straight.Handle type: Plain.Jaw Capacity: 1/4 in.Pinches off and locks on to tubing, leaving both hands free to do other work.Adjustable mechanical locking; Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use.Maximum toughness and durability.Guarded release trigger quickly unlocks and protects from accidental release.VISE-GRIP® The Original™ Alloy Steel Locking Pinch-Off Tool: Turn screw to adjust pressure and fit work, and stays adjusted for repetitive use.

The Lenox 6-in-1 Multi-Bit Screwdriver with in-handle storage has a dual-sided removable shaft offering 3/8-in. and 5/16-in. nut driving capability. Its slip-resistant grip and acetate handle provide added control, torque, and durability. Bits include Phillips? #1 and #2, slot 3/16 in. and 1/4 in., and nut drivers 5/16 in. and 3/8 in..6-in-1 versatility with in-handle storage.Dual-sided removable shafts offer 3/8-in. and 5/16-in. nut driving capability.Slip-resistant grip and acetate handle for added control, torque, and durability.Includes Phillips #1, #2, slot 3/16 in. and 1/4 in. bits, and nut drivers 5/16 in. and 3/8 in.

The 21-in-1 Twist-A-Nut Ratcheting Screwdriver by IDEAL is a great tool to handle many needs. It has a wire connector wrench that accepts a variety of connectors and reduces finger fatigue. The pro-quality, 28-tooth, all-metal ratchet can handle 225 lbs. of torque without fail. The ergonomic, slip-free textured grip provides excellent torque and is impervious to perspiration, gas, oil and chemicals, and there is even a convenient bit storage unit located in the handle..Screwdriver with 6 bits.Neon handle Set includes:.1/4" slotted.3/16" slotted.#2 Phillips.#1 Phillips.T15 star-style bit.T20 star-style bit.⚠ WARNING: Cancer and Reproductive Harm - WWW.P65warnings.ca.gov

VISE-GRIP® 9 1/2" Nickel chromium steel north American linemen's plier features ergonomic handle for comfort. Plier has machined jaws for maximum gripping strength..Size: 1 9/16 in jaw length x 1 1/4 in jaw width x 5/8 in jaw thickness.Length: 9 1/2 in.Tip type: Square.Handle type: Ergonomic.ProTouch grips provide extra comfort and reduces hand fatigue.Induction hardened cutting edge stays sharper with longer life.Machined jaws for maximum gripping strength.Used as wire cutter.Color: Blue/yellow.VISE-GRIP® Nickel Chromium Steel North American Linemen's Plier has machined jaws for maximum gripping strength.

HANSON® High carbon steel taper pipe tap with 1/8" NPT thread and 27 TPI is made of high carbon steel. Tap with 4 flutes is ideal for pipe fittings and to cut internal pipe threads..Thread size: 1/8 in.Thread per inch: 27.Thread type: NPT.Number of flutes: 4.Material: High carbon steel.Ideal for pipe fittings; Cuts internal threads in pipes.Nominal size of the tap is same as the pipe fitting being tapped; Tapered at a rate of 3/4 in per foot.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP).Cutting direction: Right.Applicable materials: Most metals.Cuts internal threads in pipes.Nominal size of the tap is that of the pipe fitting being tapped.Tapered at a rate of 3/4 in per foot.Ideal for pipe fittings.Pipe tap ideal for pipe fittings, 1/8-27 npt.