Gigabit Ethernet PCIe

Intel® Ethernet server adapter consists of data link protocols such as 10MB LAN, 100MB LAN and gigabit LAN. Adapter supports twisted pair media type and has audio video bridging with power management technologies..Network adapter interface: PCI express x1.Adapter represents the next step in the Gigabit Ethernet networking evolution for the enterprise and data center, offering audio video bridging.Dimensions: 2.6"(H) x 0.7"(W).Ports: Single port, Card height: Low-profile, full-height, Connector and cable: RJ-45 copper, Cable type: Category-3, category-5, category-5e up to 100 m.Media and performance: Category 5e twisted pair.Network and communication: 10/100/1000base-T.Device supported: PC, Mac.Form factor: Plug-in card.Ethernet controller: Intel Ethernet controller I210.Package includes: Ethernet server adapter I210, low-profile bracket.Standards and certificates: FCC B, UL CE, VCCI, BSMI, CTick, KCC, IEEE standards: 802.1Qav, 802.1Qat, 802.1AS, 802.3, 802.3u, 802.3x, 802.3z, 802.3ab, 802.3az.Warranty: Lifetime.Intel® Ethernet server adapter is a plug in card which has 10/100/1000Base-T network technology and efficiently manages packets with minimum latency.

1-Port 2.5GbE M.2 2280 Network Card, Multi-Gigabit Speeds (2.5G/1G/100M/10M), NBASE-T (802.3bz) NIC, M.2 B+M Key, PCIe Ethernet Interface, For SFF/Desktop PCs.High-performance M.2 Ethernet 2.5Gbps network card with Intel I225-V-chip; Multi-gigabit; Leverage existing Cat5e/Cat6 cabling (or better); NBASE-T (802.3bz); PCI Express M2 2280 B or M key compatible.M.2 2280 form factor is ideal for upgrading systems that do not have PCIe expansion slots or where slots are already in use; Includes 2ft (60cm) M/F Cat6 cable adapter for running Ethernet port to full/low-profile bracket on the rear of the PC.2.5GBASE-T variable speed options (2.5/1Gbps and 100/10Mbps) with auto-negotiation; Supports B or M key M.2 PCIe Gen 2 slots; Network interface card for PC is compatible with Windows/VMware/Linux; Full and low profile bracket included.Intel vPro® for remote management and troubleshooting; PXE boot enabled for faster deployment/updates; 9K jumbo frame for reduced packet overhead; Remotely boot a system using WoL; VLAN support for efficient network management.Designed and built for IT Professionals, this 2.5 GbE M.2 NIC is backed for two years, including free lifetime 24/5 multi-lingual technical assistance.This Ethernet card supports the following advanced features: PXE Boot, Wake-on-Lan (WoL), VLAN tagging, 9K jumbo frame, half-duplex, auto-negotiation, and Error Correcting Memory (ECC) for optimal network functionality..This 2.5 GbE M.2 Network Interface Card (NIC) features an Intel I225-V chipset with Intel vPro® technology, for enhanced performance and data integrity. Variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support of new and legacy network hardware. Leverage existing Cat5e or CAT6 cabling infrastructure while adding 2.5GBASE-T (802.3bz) compatibility for seamless integration.

The StarTech.com® ST10000SPEXI 1-Port 10G Ethernet network card utilizes the Intel® X550-AT chipset to provide power, performance and enhanced capabilities that is required for dependable network connections. It lets you to add a 10G/5G/2.5G/1G/100Mbps R-J45 Ethernet port to provide network connectivity for high bandwidth workstations and servers. The Intel X550-AT chipset provides advanced features including Intel® Virtualization technology for connectivity and PXE network boot support. It has dual-profile design that allows easy installation into a wide range of computer/server chassis, regardless of form factor..Ethernet network card offers flexible configuration and secure networking to users in a standards-based environment.Dimensions: 4.8"H x 2.7"W x 6"L, Cable length: 3.9".Color: Black.Connectors: One PCI Express x4 male, one RJ-45 female.Data transfer rate: 10 Gbps.Bus type: PCI Express, Card type: Standard Profile (LP bracket incl.).Chipset ID: Intel X550AT.Industry standards: IEEE 802.3an (10GBASE-T), IEEE 802.3ab (1GBASE-T), IEEE 802.3u (100Base-T), NBASE-T (Linux only), PCI Express Rev 2.0.Compatible networks: 10 Gbps/5G/2.5G/1G/100 Mbps.Supported protocols: IEEE 802.3x (Flow Control Support), IEEE 802.1Q (VLAN tagging).LED indicators: One Link/activity, one 10G/1G speed.OS compatibility: Windows 7, 8, 8.1, 10 (64-bit only), Windows Server 2008 R2, 2012, 2012 R2 (64-bit only), 2016, Linux 2.4.x/2.6x/3.x LTS Versions.Includes: One 10G network card, one low-profile bracket, one quick-start guide.Weight: 3.4 oz..Comes with 2 years warranty

The Ethernet PCI-Express Network Interface Card from Dell is ideal for connecting your server to your network. The Dual Port Server Adapter proven to be reliable and standards-based solutions. This product has been tested and validated on Dell systems. It is supported by Dell Technical Support when used with a Dell system..Dual-port Ethernet network adapter with an OCP 3.0 interface that supports 10/25 Gigabit Ethernet connectivity.Supports a maximum data transfer rate of up to 25,000 Mbps.Features two high-speed Ethernet ports.Compatible with Dell PowerEdge servers that support the OCP 3.0 interface, including models like R650, R750, R760, C6520, C6620, T550, T560, XE8640, XE9680, XR5610, and XR7620