10GB Network Card PCIe

Two 10GbE Ports with SR-IOV and iSCSI, Block-based, Supports Multiple Virtual Disk Modes The dual port QXG-10G2T-X710 is a PCIe Gen 3 (compatible with PCIe Gen 2)10GbE network expansion card with an Intel Ethernet Controller X710 and supports up to five speeds (10G / 5G / 2.5G / 1G / 100M). By using Port Trunking, both ports can be combined to achieve up to 20Gbps transfer speeds for accelerating file sharing and intensive data transfer. With SR-IOV and iSCSI support, the QXG-10G2T-X710 greatly boosts network efficiency and is ideal for I/O-intensive and latency-sensitive virtualization applications and data centers. Build a 10GbE Network Environment The QXG-10G2T-X710 can be used with QNAP's 10GbE switches, such as the QSW-M2108-2C or QSW-1208-8C, for you to build a budget-friendly high-speed network environment..PCI Express 3.0 x4 interface provides enhanced bandwidth for the quick access of data by the operating system and applications.This dual port 10gigabit ethernet card lets you add two network ports using a single expansion slot to a client, server or workstation.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10GBase-T technology get up to 10Gbps data transfer rate over the twisted pair cable

Axiom's family of network server adapters provide a wide-range of solutions to boost network performance and improve IT flexibility. Available band-widths range from 100Mbs to 100Gbs on interfaces ranging from 32-Bit PCI to PCIe 4.0 x16. Each adapter provides standard connector options from single port, dual port, quad ports in copper and/or fiber-based connections. Axiom network interface cards accelerate applications with enterprise-proven connectivity. These solutions are available for designated branded OEM systems. Each Axiom network adapter is 100-percent tested to ensure long-term reliability and performance in high transaction and mission-critical applications. Optimized for virtualization. Maximizes I/O consolidation with high performance ports. Leverages and protects existing IT investments. Delivers cost reductions in operating expense and total cost expense. Provide connectivity and scalability required for enterprise environments. Deliver enterprise-class connectivity. Supports both data and storage I/O with an adapter that can integrate with your existing Fibre Channel and Ethernet networks, extending the value of your network investments. Achieve convergence - Run concurrent TCP/IP and storage (iSCSI or Fibre Channel) traffic over a single link. Includes Full Height and Half Height Mounting Brackets.This 4000 MB/s bandwidth PCI Express 2.0 x8 adapter ensures easy connectivity and plug-in form-factor for affordable and reliable Ethernet network.For high bandwidth connectivity, add this efficient dual port 10gigabit ethernet card to your server or workstation.Supports optical fiber cable to span longer distances and provides data transmission rates par excellence between servers and network components.With the 10GBase-X technology get up to 10Gbps data transfer rate over the supported network cable

Axiom's 10GbE Copper Network Adapters are the latest generation of high-performance PCIe 3.0 x8 Lane 10 Gigabit NIC Cards, based on the Intel XL710 controller. The server adapter simplifies migration to 10 Gigabit Ethernet (GbE), Provides iSCSI FCoE Virtualization and Flexible Port Partitioning (FPP). Key Features: Low cost, low power, 10GbE performance for the entire datacenter. New generation single, dual and quad -port 1OGBASE-T controller with integrated MAC and PHY Standard CAT6a cabling with RJ45 connectors. Supports NBASE-T technology (2.5 and 5.0 GbE over CAT 5e) Backward compatibility with existing 1000BASE-T networks simplifies the transition to 10GbE. PCI Express - (PCIe) v3.0 with up to 8.0 GT/s Network Virtualization offloads including VXLAN, GENEVE, NVGRE, MPLS, and VXLAN-GPE with Network Service Headers (NSH) Excellent small packet performance for network appliances and Network Functions Virtualization (NFV).This 8000MB/s bandwidth adapter is ideal for PCs with PCI Express 3.0 x8 slots, ensuring top level network connectivity for your desktops.This quad ports network adapter is designed to meet the multi-port network connectivity needs of today's data centered environments demanding virtualization, converged infrastructure, and power reduction.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10GBase-T technology get up to 10Gbps data transfer rate over the twisted pair cable

This is a Cisco® UCSC-PCIE-ITG comparable 10-Gigabit Ethernet PCIe 2.0 x8 network interface card with dual RJ-45 ports that comply with IEEE 802.3 standards. It is based on an Intel X540 chipset and is compatible with a variety of different applications and operating systems, including Windows, Linux and Unix-like systems. Providing 10Gbs of network speed, it fully supports high-end servers and various other networking applications. In addition, this card supports high level VLAN filtering. The dual RJ-45 ports operate over copper patch cable, allowing for an operating distance of 100m. This product includes both half-height and full-height brackets. Our network interface cards are 100% compliant, and offer a cost effective solution for all of your network upgrade needs. With our certification test program, we guarantee your product will work right the first time..This 4000 MB/s bandwidth PCI Express 2.0 x8 adapter ensures easy connectivity and plug-in form-factor for affordable and reliable Ethernet network.For high bandwidth connectivity, add this efficient dual port 10gigabit ethernet card to your server or workstation.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10GBase-T technology get up to 10Gbps data transfer rate over the twisted pair cable

3a5063e5b4a508a14f0206aca289a6dc.Versatile: use internally with PCIe slot equipped Mac Pro and Windows computers or externally with the OWC ThunderBay Flex 8, ThunderBay Flex 1U4, or Mercury Helios 3S.Easy integration: utilize existing Cat7 or Cat6a cabling up to 100-meter for full 10Gb speed or up to 5Gb speed for existing Cat6 and Cat5e cabling.Cost-effective: 2.5GBASE-T and 5GBASE-T technology (formerly NBASE-T) provides up to 500% faster performance with existing cabling.Smart: supports auto-negotiation for 10Gb/s, 5Gb/s, 2.5Gb/s, 1Gb/s, 100Mb/s, and 10Mb/s BASE-T Ethernet standards

Axiom's family of network server adapters provide a wide-range of solutions to boost network performance and improve IT flexibility. Available band-widths range from 100Mbs to 100Gbs on interfaces ranging from 32-Bit PCI to PCIe 4.0 x16. Each adapter provides standard connector options from single port, dual port, quad ports in copper and/or fiber-based connections. Axiom network interface cards accelerate applications with enterprise-proven connectivity. These solutions are available for designated branded OEM systems. Each Axiom network adapter is 100-percent tested to ensure long-term reliability and performance in high transaction and mission-critical applications. Optimized for virtualization. Maximizes I/O consolidation with high performance ports. Leverages and protects existing IT investments. Delivers cost reductions in operating expense and total cost expense. Provide connectivity and scalability required for enterprise environments. Deliver enterprise-class connectivity. Supports both data and storage I/O with an adapter that can integrate with your existing Fibre Channel and Ethernet networks, extending the value of your network investments. Achieve convergence - Run concurrent TCP/IP and storage (iSCSI or Fibre Channel) traffic over a single link. Includes Full Height and Half Height Mounting Brackets.This 4000 MB/s bandwidth PCI Express 2.0 x8 adapter ensures easy connectivity and plug-in form-factor for affordable and reliable Ethernet network.For high bandwidth connectivity, add this efficient dual port 10gigabit ethernet card to your server or workstation.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10GBase-T technology get up to 10Gbps data transfer rate over the twisted pair cable

This PCIe network card makes it easy to add two 10GBase-T ports to your server or workstation, providing an affordable solution for high-bandwidth applications. It supports 10GbE over Cat 6 cabling up to 55 meters and Cat 6A cabling up to 100 meters. Compatible with a broad range of operating systems, this versatile dual-port NIC reduces network slowdown/degradation when running data-intensive applications/processes such as FTPs and online storage/backup. It's a cost-effective way to enhance your server or computer capabilities by adding two powerful 10-Gigabit Ethernet ports, with support for advanced features such as VLAN tagging, jumbo frames, and Auto-MDIX..Ethernet network adapter with a PCIe interface that supports Gigabit and 10 Gigabit speeds.Supports a maximum data transfer rate of 20,000 Mbps (20 Gbps full-duplex).Features 2 Ethernet ports for high-speed network connectivity.Compatible with Windows 10/11, Windows Server 2019/2022, and Linux Ubuntu 20.04+, and works with any system featuring a PCIe x8 slot and 10GBASE-T network infrastructure.Engineered for high-performance networking with support for PXE boot, 802.3ad Link Aggregation, Auto-MDIX, and VLAN tagging.9K jumbo frames for enhanced throughput in virtualized and high-traffic environments.2-Year limited warranty

TRENDnet's 10 Gigabit PCIe SFP+ Network Adapter, model TEG-10GECSFP, converts a free PCI Express slot into a 10 Gigabit SFP+ slot. The 10G SFP+ PCIe adapter includes advanced features such as jumbo frame and VLAN tagging support. The included standard and low profile brackets are compatible with Windows® and Linux® desktop computer designs. HARDWARE INTERFACE:10G SFP plus : 10G SFP plus PCIe adapter provides one SFP plus slot for high speed 10 Gigabit fiber connectivity NDAA + TAA COMPLIANT: With our NDAA and TAA compliant Network Adapters, you can plan and install networking solutions that Government customers demand today (U.S. and Canada Only) MANUFACTURER PROTECTION: We stand by the quality of our products. The TEG-10GECSFP 10 Gigabit PCIe SFP+ Network Adapter is backed and supported with 3 years of TRENDnet Manufacturer Protection. CONVERT A PCle 2.0 x4 SLOT: The SPF adapter converts a free PCI Express slot into a 10 Gigabit SFP plus slot. VLAN SUPPORT: IEEE 802.1Q tagged-based VLAN support COMPATIBLE OPERATING SYSTEMS: The SFP plus adapter is compatible with Windows, Windows Server, and Linux operating systems. JUMBO FRAME: The 10G SFP adapter sends larger packets, or jumbo frames (up to 16 KB), for increased performance BRACKETS INCLUDED: The 10 gigabit network adapter supports most installations and comes with standard and low-profile brackets ADDITIONAL SUPPORT: Microsoft Scalable Networking, Receive-side scaling (RSS), Message Signaled Interrupts (MSI), IP, TCP, and UDP checksum offloading, Minimize overhead with reduced host bus traffic and CPU utilization.Windows® and Linux® support.Includes standard and low-profile brackets.Converts a PCIe slot into a 10G SFP+ Slot.Supports 802.1Q VLAN Tagging

Increase your bandwidth up to 10 Gbps with this StarTech SFP+ card for enhanced data transfer rate using fiber optic cable. Reduce wait times for large file transfers, content sharing, network storage, or any other high bandwidth application. This PCIe network card has an open SFP+ slot that can accept any MSA-compliant module or direct attach cable (DAC). It is compatible with multimode, single-mode, and copper SFP+ modules. This card is natively supported in Windows 11. For security and privacy reasons a fiber network card is the ideal point-to-point network adapter. Eliminate EMI with a fiber connection and cover longer distances with fiber to host..Network controller to add a 10GbE SFP+ module to a PCI Express (PCIe) 3.0 x 4 slot in your workstation.Provides Ethernet speeds up to 10Gbps.Has one SFP+ slot.Compatible with both MSA-compliant and branded 10GB SFP+ modules.Meets or exceeds the RpHS and WEEE standards.An open SFP+ slot to make changes as needed just by swapping the module in use, whether it is fiber, copper, or direct attach cables (DAC).9K jumbo frame support for reduced packet overhead.VLAN tagging support for efficient network managemen.Full-profile bracket are installed by default, with a low-profile bracket included.2-year manufacturer limited warranty

Experience ultra-fast networking with the QNAP 10Gigabit Ethernet Card, ideal for upgrading client, server, or workstation connectivity. The PCI Express 3.0 x4 interface provides enhanced bandwidth for rapid data access and application performance. Easily connect to wired networks with a single port adapter for hassle-free, responsive networking. Supports cost-effective twisted pair cables for data transfer up to 100 meters, and 10GBase-T technology delivers up to 10Gbps speeds..PCI Express 3.0 x4 interface provides enhanced bandwidth for the quick access of data by the operating system and applications.Connect to a wired network with this single port network adapter for a hassle-free and quick response.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10GBase-T technology get up to 10Gbps data transfer rate over the twisted pair cable

Maximize bandwidth to tackle heavy-duty applications The Synology E10G22-T1-Mini Network Upgrade Module is designed to easily and quickly upgrade your Synology system with 10GbE connectivity. 1 Simple installation, low implementation cost, and support for nearly any network environment makes it the ideal solution for small businesses and home users looking to maximize the performance potential of their deployments. Throughput Expand system capabilities with 10GbE connectivity Flexibility Integrate easily with support for 10/5/2.5/1 Gbps networks. Compatibility Designed for maximum performance and reliability in Synology system.s Simple installation Install the E10G22-T1-Mini through the dedicated and easily-accessible network upgrade slot to instantly add bandwidth availability in Synology servers featuring compact-size enclosures. Multi-gig support Integrate into any RJ-45 network environment with autonegotiation between 10, 5, 2.5, 1 Gbps, and 100 Mbps data rates based on actual network conditions..The PCI Express 3.0 x2 interface provides smooth data transfer and outstanding performance.Add your computer to your home or office network with this single port 10gigabit ethernet card conveniently.With the 10GBase-T technology get up to 10Gbps data transfer rate over the twisted pair cable

This is a Supermicro® AOC-STG-I2T comparable 10-Gigabit Ethernet PCIe 2.0 x8 network interface card with dual RJ-45 ports that comply with IEEE 802.3 standards. It is based on an Intel X540 chipset and is compatible with a variety of different applications and operating systems, including Windows, Linux and Unix-like systems. Providing 10Gbs of network speed, it fully supports high-end servers and various other networking applications. In addition, this card supports high level VLAN filtering. The dual RJ-45 ports operate over copper patch cable, allowing for an operating distance of 100m. This product includes both half-height and full-height brackets. Our network interface cards are 100% compliant, and offer a cost effective solution for all of your network upgrade needs. With our certification test program, we guarantee your product will work right the first time..This 4000 MB/s bandwidth PCI Express 2.0 x8 adapter ensures easy connectivity and plug-in form-factor for affordable and reliable Ethernet network.For high bandwidth connectivity, add this efficient dual port 10gigabit ethernet card to your server or workstation.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10GBase-T technology get up to 10Gbps data transfer rate over the twisted pair cable

The QXG-10G2T is a highly energy efficient and cost-effective 10 GbE network expansion card, which is suitable for a team requiring simultaneous data access with multiple members, or a photographer/videographer requiring super-fast data transmission. 5-speed Supports five speeds (10GbE / 5GbE / 2.5GbE / 1GbE / 100MbE). NAS and PC The QXG-10G2T can be installed in a QNAP NAS or Windows® PC. Marvell® AQtion Controller AQC107 Highly energy efficient and cost-effective. PCIe 3.0 PCIe Gen 3 x4 provides up to 32 Gbps transfer speeds. Efficient cooling module Keeps the QXG-10G2T cool and maintains high performance. LED indicators Monitor the real-time status of ports with handy LED indicators. Supports NAS and PC OS QNAP Network Expansion Cards support NAS operating systems (QTS and QuTS hero), Windows® 10 and Linux®, allowing you to maximize the performance potential of all your networked devices. Gain up to 20 Gbps connectivity By virtually bundling two 10 GbE ports with SMB multichannel or port trunking, you gain larger bandwidth for your QNAP NAS. Let's see which features are suitable for your usage scenarios: SMB Multichannel: Multiply the available bandwidth (20 Gbps) between NAS and directly-connected clients. Suited for personal use. Port trunking: Increases file access efficiency for simultaneous data access with multiple members. Recommended for users who deploy network switches in their IT infrastructure. Build a 10 GbE network environment Increase your IT performance and productivity by using the QXG-10G2T with QNAP's 10 GbE switches to build budget-friendly high-speed network environments. Fully unleash your network with a companion switch Build your ideal network environment to satisfy connectivity demands and streamline various storage applications..PCI Express 3.0 x4 interface provides enhanced bandwidth for the quick access of data by the operating system and applications.This dual port 10gigabit ethernet card lets you add two network ports using a single expansion slot to a client, server or workstation.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10GBase-T technology get up to 10Gbps data transfer rate over the twisted pair cable

Add two independent 10G Ethernet ports to your enterprise, server, or desktop computer Adds two independent 10G Ethernet ports through an available PCI Express 2.0 specification x8 or larger PCIe slot to server or desktop systems Intel X540-T2 chipset supports reliable and advanced network connectivity with Intel virtualization technology Compliant with IEEE 802.3, 802.3an, 802.3ad, 802.1Q with full duplex and Wake-on-Lan support Features DMA Coalescing to increase efficiency and reduce power consumption Fits both standard and low-profile system chassis with the included brackets Extra large heat-sink provides better heat-dissipation for reliable performance and long life More from the Manufacturer.Enjoy superfast data transfer of up to 4000 MB/s with PCI Express 2.1 x8 card, between the network card and motherboards.This dual port 10gigabit ethernet card lets you add two network ports using a single expansion slot to a client, server or workstation.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10GBase-T technology get up to 10Gbps data transfer rate over the twisted pair cable

The Axiom PCIe 3.0 x8 10Gbs Fiber Network Adapter is a new generation of high-performance server adapter. Based on the Intel X710-BM2 controller, our server adapters address the demanding needs of the next-generation agile data center by providing unmatched features for both server and network virtualization, flexibility for LAN and SAN networks and proven, reliable performance. The PCIe 3.0 x8 10Gbs Fiber Network Adapter delivers superior performance in a PCI Express v3.0 x8 slot. Key features include: Small Packet Performance: Achieves wire-rate throughput on smaller payload sizes (>64 Bytes for 10 GbE) Bulk Transfer Performance: Delivers line-rate performance with low CPU usage for large application buffers Network Virtualization: Network virtualization overlay offloads including Geneve, VXLAN, and NVGRE Storage Performance: Enables competitive performance with native OS drivers and intelligent offload for NAS (NFS, SMB), and SAN (iSCSI and FCoE) Includes Full Height and Half Height Mounting Brackets.Enjoy superfast data transfer of up to 8000 MB/s with PCI Express 3.0 x8 card, between the network card and motherboards.This dual port 10gigabit ethernet card lets you add two network ports using a single expansion slot to a client, server or workstation.Supports optical fiber cable to span longer distances and provides data transmission rates par excellence between servers and network components.With the 10GBase-X technology get up to 10Gbps data transfer rate over the supported network cable

Intel provides data centers worldwide with innovative Ethernet components and solutions that are extensively tested for network interoperability, reliability, and performance. Intel Ethernet controllers, adapters and accessories deliver speeds from 1 to 100GbE - with versatile capabilities to optimize workload performance..Intel X710 Ethernet adapter delivers high speeds and versatile capabilities to optimize workload performance.Data rate per port: 10GbE/5GbE/2.5GbE/1GbE/100Mb.Equipped with four Ethernet ports.Compatible with motherboards equipped PCIe x8 system interface.Features: On-chip QoS and Traffic Management, Flexible Port Partitioning, Virtual Machine Device Queues (VMDq), PCI-SIG SR-IOV Capable, Intel Data Direct I/O Technology, Intelligent Offloads, Storage Over Ethernet (iSCSI, NFS).Cabling type: RJ45 CAT-6, CAT-6a, CAT-5e up to 328'.5-year manufacturer limited warranty

The Intel 2-port Gigabit Ethernet converged network adapter meet the needs of the next-generation agile data center by providing flexibility for LAN/SAN networking. This low profile adapter offers superior performance up to 80 Gb/s bi-directional throughput. It has Ethernet flow director for hardware based application traffic steering and I/O virtualization innovations for optimum performance. This adapter features excellent small packet performance for network appliances and network function virtualization for reliable performance. It has data plane developer kit for efficient packet processing..Gigabit Ethernet network adapter provides unmatched features for virtualization, flexibility for LAN and SAN networking.Interfaces/ports: PCI Express 3.0 x8, SFP+ slot.Management protocols: Large Send Offload (LSO), packet filtering, PXE support, Quality of Service (QoS), Receive Side Scaling (RSS).Data transfer rate: 10 Gb/s.Dimensions: 2.7"H x 6.6"W.Meets BSMI, C-Tick, Directive 2011/65/EU, FCC Class B, KCC, MSA SFF-8431, RoHS, UL and VCCI certifications or standards.Form factor: Plug-in card.Remote management: RMON, SNMP, Network transport protocol: iSCSI, TCP/IP, UDP/IP.Media type supported: Twinaxial, Device supported: Server.Status indicators: Link/activity, port transmission speed.System requirements: FreeBSD 10, FreeBSD 9, Linux Kernel 2.6.32, Linux Kernel 3.x, Microsoft Windows Server 2008/Server 2008 R2/Server 2008 R2.Operating temperature: 32 - 131 deg F.Comes with lifetime limited warranty

Axiom's family of network server adapters provide a wide-range of solutions to boost network performance and improve IT flexibility. Available band-widths range from 100Mbs to 100Gbs on interfaces ranging from 32-Bit PCI to PCIe 4.0 x16. Each adapter provides standard connector options from single port, dual port, quad ports in copper and/or fiber-based connections. Axiom network interface cards accelerate applications with enterprise-proven connectivity. These solutions are available for designated branded OEM systems. Each Axiom network adapter is 100-percent tested to ensure long-term reliability and performance in high transaction and mission-critical applications. Optimized for virtualization. Maximizes I/O consolidation with high performance ports. Leverages and protects existing IT investments. Delivers cost reductions in operating expense and total cost expense. Provide connectivity and scalability required for enterprise environments. Deliver enterprise-class connectivity. Supports both data and storage I/O with an adapter that can integrate with your existing Fibre Channel and Ethernet networks, extending the value of your network investments. Achieve convergence - Run concurrent TCP/IP and storage (iSCSI or Fibre Channel) traffic over a single link. Includes Full Height and Half Height Mounting Brackets.Enjoy superfast data transfer of up to 4000 MB/s with PCI Express 2.0 x8 card, between the network card and motherboards.This dual port 10gigabit ethernet card lets you add two network ports using a single expansion slot to a client, server or workstation.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10Base-T technology get up to 10Mbps data transfer rate over the twisted pair cable

The Intel Ethernet 10 Gigabit Converged Network Adapter X520-DA2 enables data center transformation by delivering a reliable, unified 10GbE network connection. Advanced platform scalability features include: Receive Side Coalescing, Intel Ethernet Flow Director, and support for PCI Express Gen2. Intel VT-c delivers industry-leading I/O virtualization capabilities, including support for Single Route I/O virtualization (SR-IOV) and Virtual Machine Device Queues (VMDq). The Intel Ethernet Converged Network Adapter X520 provides advanced unified networking capabilities, including support for iSCSI, NFS, and FCoE. The Intel Ethernet Converged Network Adapter X520 facilitates greater network infrastructure consolidation and is the best choice for I/O virtualization..Ethernet adapter featuring a PCI Express 2.0 x8 interface, delivering 10 Gigabit network performance..Supports a data transfer rate of 10,000 Mbps..Comes with 2 SFP+ ports..Compatible with servers, workstations, and enterprise platforms..Backed by a 1-year limited warranty.

Add 10G Ethernet capability to your enterprise, server, or desktop computer Quickly adds one 10G Ethernet port, through an available PCI Express 3.0 x4 slot, to server or desktop systems NBASE-TTM technology allows 2.5Gbps and 5Gbps Ethernet speeds for cable lengths up to 100 meters, over existing CAT5e/6 cable infrastructure plus Power over Ethernet (PoE) over CAT cable Intel X550 chipset supports reliable and advanced network connectivity with Intel virtualization technology Compliant with IEEE 802.3, 802.3an, 802.1Q with full duplex and Wake-on-Lan support Feature innovative power management including 802.3az EEE (Energy Efficient Ethernet) and DMA Coalescing to increase efficiency and reduce power consumption Fits both standard and low-profile system chassis with the included brackets Extra large heat-sink guards against heat build-up for reliable performance and long life.NBASE-TTM technology allows 2.5Gbps and 5Gbps Ethernet speeds for cable lengths up to 100 meters, over existing CAT5e/6 cable infrastructure plus Power over Ethernet (PoE) over CAT cable.Intel X550 chipset supports reliable and advanced network connectivity with Intel virtualization technology.Compliant with IEEE 802.3, 802.3an, 802.1Q with full duplex and Wake-on-Lan support.Feature innovative power management including 802.3az EEE (Energy Efficient Ethernet) and DMA Coalescing to increase efficiency and reduce power consumption

The Axiom PCIe 3.0 x8 10Gbs Fiber Network Adapter is a new generation of high-performance server adapter. Based on the Intel X710-BM2 controller, our server adapters address the demanding needs of the next-generation agile data center by providing unmatched features for both server and network virtualization, flexibility for LAN and SAN networks and proven, reliable performance. The PCIe 3.0 x8 10Gbs Fiber Network Adapter delivers superior performance in a PCI Express v3.0 x8 slot. Key features include: Small Packet Performance: Achieves wire-rate throughput on smaller payload sizes (>64 Bytes for 10 GbE) Bulk Transfer Performance: Delivers line-rate performance with low CPU usage for large application buffers Network Virtualization: Network virtualization overlay offloads including Geneve, VXLAN, and NVGRE Storage Performance: Enables competitive performance with native OS drivers and intelligent offload for NAS (NFS, SMB), and SAN (iSCSI and FCoE) Includes Full Height and Half Height Mounting Brackets.This 8000 MB/s bandwidth PCI Express 3.0 x8 adapter ensures easy connectivity and plug-in form-factor for affordable and reliable Ethernet network.For high bandwidth connectivity, add this efficient dual port 10gigabit ethernet card to your server or workstation.Supports optical fiber cable to span longer distances and provides data transmission rates par excellence between servers and network components.With the 10GBase-X technology get up to 10Gbps data transfer rate over the supported network cable

The Axiom PCIe 3.0 x8 10Gbs Fiber Network Adapter is a new generation of high-performance server adapter. Based on the Intel X710-BM2 controller, our server adapters address the demanding needs of the next-generation agile data center by providing unmatched features for both server and network virtualization, flexibility for LAN and SAN networks and proven, reliable performance. The PCIe 3.0 x8 10Gbs Fiber Network Adapter delivers superior performance in a PCI Express v3.0 x8 slot. Key features include: Small Packet Performance: Achieves wire-rate throughput on smaller payload sizes (>64 Bytes for 10 GbE) Bulk Transfer Performance: Delivers line-rate performance with low CPU usage for large application buffers Network Virtualization: Network virtualization overlay offloads including Geneve, VXLAN, and NVGRE Storage Performance: Enables competitive performance with native OS drivers and intelligent offload for NAS (NFS, SMB), and SAN (iSCSI and FCoE) Includes Full Height and Half Height Mounting Brackets.Enjoy superfast data transfer of up to 8000 MB/s with PCI Express 3.0 x8 card, between the network card and motherboards.For high bandwidth connectivity, add this efficient dual port 10gigabit ethernet card to your server or workstation.Supports optical fiber cable to span longer distances and provides data transmission rates par excellence between servers and network components.With the 10GBase-X technology get up to 10Gbps data transfer rate over the supported network cable

10GBase-T PCIe Network Adapter with backward compatibility of 5/2.5/1G and 100Mbps; RJ45 port and built-in QoS Hyper-fast 10Gbps Networking - Enjoy up to 10X-faster data-transfer speeds for bandwidth-demanding tasks. Complete Compatibility - XG-C100C is compatible with current network standards, including 10/5/2.5/1Gbps and 100Mbps, for seamless backward compatibility. Compatible with Windows and Linux - Supports Windows 10 and Linux Kernel 4.4 for flexible OS integration. RJ45 Port for Easy Migration - Easily upgrade to 10Gbps networking using standard copper network cables. Prioritize Your Games - Built-in Quality-of-Service (QoS) technology lets you prioritize bandwidth and supported gaming packets for a smooth gaming experience..10Gigabit Ethernet card offers the flexibility and scalability to make infrastructure run as efficiently and productively as possible with 10Gigabit data transfer rate.Enjoy superfast data transfer of up to 2000 MB/s with PCI Express x4 card, between the network card and motherboards.This single port 10gigabit ethernet card enables you to connect your computer system to your existing network.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10GBase-T technology get up to 10Gbps data transfer rate over the twisted pair cable

The new Intel Ethernet Converged Network Adapter X540-T2 is the lowest cost way to deploy 10 GbE in your data center today. Install the X540 adapter into a server and the auto-negotiation between 1 GbE and 10 GbE provides the necessary backwards compatibility that most customers require for a smooth transition and easy migration to 10 GbE. When time and budget allows, 10GBASE-T switches can be added any time to experience the full benefits of 10 GbE. The wait for a low cost 10 GbE copper solution to broadly deploy 10 GbE to all corners of the data center is over. The new X540, dual-port adapter provides bandwidth-intensive applications with highly affordable 10GbE network performance and cost-effective RJ-45 connectivity for distances up to 100 meters..Ethernet network adapter with PCI Express 2.0 x8 interface, supporting high-speed 10 Gigabit connectivity..Supports up to 10,000 Mbps for ultra-fast data transmission over copper Ethernet connections..Equipped with 2 Ethernet ports..Works with Cat6/Cat6a Ethernet cables and 10GbE-capable switches or routers for optimal performance..RoHS compliant, ensuring environmentally safe construction with restricted use of hazardous materials..Backed by a Limited Lifetime Manufacturer Warranty.

The Intel® X550T2 Ethernet converged network adapter is the most flexible adapter for all your networking requirements. The adapter features an Intel® Ethernet controller with RJ45 copper connector and supports 55 m on Cat6, 55/100 m on Cat6A cabling. The adapter has dual port PCIe 3.0 slot for external connectivity..Ethernet converged network adapter is perfect for today's server platforms.Interfaces/ports: 2 x RJ-45 copper.Cable: 55 m on cat6, 55 / 100 m on cat6a.Bus type: PCI express 3.0 (8 GT/s), bus width: x4 lane PCIe, operable in x8 and x16 slots.Form factor: Plug-in card.Network virtualization: VXLAN.Interrupt levels: INTA, MSI, MSI-X.Network technology: 10GBase-T.Low cost, low power 10 GbE performance for the entire datacenter, enables higher bandwidth.Lower processor usage, increased throughput.Includes network adapter, low-profile bracket, full-height bracket.RoHS compliant.Comes with limited lifetime warranty

10 Gigabit for the Broad Market: The Intel Ethernet Converged Network Adapter X540 is the latest innovation in Intel's leadership to drive 10 Gigabit Ethernet into the broader server market. This adapter hosts Intel's latest Ethernet silicon, the Intel® Ethernet Controller X540, which is used by many OEMs as a single chip solution for LAN on Motherboard (LOM) to deliver 10 Gigabit Ethernet (10 GbE) on the latest server platforms..Ethernet adapter with PCI Express 2.1 x8 interface, supporting 10 Gigabit Ethernet for high-speed data transfer..Supports a data transfer rate of 10,000 Mbps per port for ultra-fast 10 Gigabit Ethernet connectivity..Equipped with 2 Ethernet ports for dual 10 Gigabit network connectivity..Compatible with servers, workstations, and high-performance desktops..Complies with RoHS standards, ensuring the product is free from hazardous substances like lead and mercury..Backed by a 1 year limited warranty.

Cost-effective and reliable 10GbE connectivity for SMBs | Throughput Increase network performance with 10GbE connectivity Flexibility Easy integration to existing deployments Compatibility Designed for maximum performance and reliability in Synology systems Boost throughput within minutes | Easy deployment Familiar RJ45 connector is backwards compatible with legacy networks and allows for incremental expansion. Link aggregation Dual 10GbE ports can be combined into a Link Aggregation Group to boost throughput up to 20 Gb/s, while also providing port failover and load balancing functionality. 1 CPU offloading and load balancing Support for CPU offloading and load balancing technologies enables optimal system performance. 5-year warranty At Synology, we are committed to product innovation and quality. Synology guarantees a robust and reliable data management experience with a 5-year limited warranty, providing responsive technical support and hardware replacement services to maximize your return on investment.This 8000MB/s bandwidth adapter is ideal for PCs with PCI Express 3.0 x8 slots, ensuring top level network connectivity for your desktops.This dual port 10gigabit ethernet card lets you add two network ports using a single expansion slot to a client, server or workstation.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10GBase-T technology get up to 10Gbps data transfer rate over the twisted pair cable

The Base-T Ethernet PCI-Express Network Interface Card from Dell is ideal for connecting your server to your network. The Base-T Quad Port Server Adapter proven to be reliable and standards-based solutions. This product has been tested and validated on Dell systems. It is supported by Dell Technical Support when used with a Dell system.Quad-port Ethernet network adapter with a PCI-Express interface that supports Gigabit and 10 Gigabit speeds.Delivers a maximum data transfer rate of 10,000 Mbps per port.Features four RJ-45 Ethernet ports for high-speed connectivity.Compatible with a wide range of Dell PowerEdge servers including models like R660, R760, R860, R960, C6620, HS5610, HS5620, and XR7620

The Dell network interface card offers a robust solution for businesses seeking high-speed and reliable connectivity for their server infrastructure. Designed to integrate seamlessly with a range of systems, including Dell's PowerEdge series such as the R6515 and R760, this component ensures compatibility with your existing hardware. Its wired connectivity, utilizing a PCI Express host interface, provides a stable and efficient data transfer rate up to 10 Gbps, making it ideal for demanding enterprise applications and data-intensive operations. This full-height PCI card incorporates four fiber ports utilizing SFP28 connectors, facilitating optimal network performance and scalability. By leveraging advanced fiber optic technology, it supports efficient and high-speed data transmission, which is crucial for maintaining operational efficiency in data centers and enterprise environments. The card's internal design allows for streamlined integration within server setups, minimizing downtime during deployment and enhancing overall system reliability..Ethernet network adapter with a PCIe interface, and it supports Gigabit Ethernet connectivity.Supports a maximum data transfer rate of 10,000 Mbps (10Gbps) per port.Features 4 Ethernet ports for high-speed wired connectivity.Compatible with a wide range of Dell PowerEdge servers, including models like R660, R760, R860, R960, T360, XR5610, and XR7620, and supports operating systems such as Windows Server and various Linux distributions

Axiom's 10GbE Copper Network Adapters are the latest generation of high-performance PCIe 3.0 x4 Lane 10 Gigabit NIC Cards, based on the Intel X550AT controller. The server adapter simplifies migration to 10 Gigabit Ethernet (GbE), Provides iSCSI FCoE Virtualization and Flexible Port Partitioning (FPP). Key Features Low cost, low power, 10GbE performance for the entire datacenter. New generation single- and dual-port 1OGBASE-T controller with integrated MAC and PHY Standard CAT6a cabling with RJ45 connectors. Supports NBASE-T technology (2.5 and 5.0 GbE over CAT 5e) Backward compatibility with existing 1000BASE-T networks simplifies the transition to 10GbE. PCI Express - (PCIe) v3.0 with up to 8.0 GT/s Unified networking delivering LAN iSCSI and FCoE in one low-cost CNA. Flexible 1/0 virtualization for port partitioning and Quality of Service (QoS) of up to 64 virtual ports Reliable, proven 10GbE technology from Intel Corporation. Includes Full Height and Half Height Mounting Brackets.PCI Express 3.0 x4 interface provides enhanced bandwidth for the quick access of data by the operating system and applications.This single port 10gigabit ethernet card enables you to connect your computer system to your existing network.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10GBase-T technology get up to 10Gbps data transfer rate over the twisted pair cable

Do you want to increase bandwidth and reduce network vulnerability while reducing costs? The HPE Ethernet 10/25Gb 2-port 631 Adapters deliver the capability to drive either 10G (SFP+) or 25G (SFP28) speeds, providing the option for a large jump in Ethernet performance. Compared to a 10G implementation these adapters offer cost reductions by lowering the number of servers, adapters, cables and switches while accelerating server performance and targeted workloads. These adapters help prevent, detect and recover from cyberattacks by protecting applications, data and server infrastructure by authenticating digitally signed firmware via a Root of Trust architecture. In addition, they offer Secure Boot, Device-level Firewall and other advanced security features. Features: Safeguard Your Data and Your Business Network: The HPE Ethernet 10/25Gb 2-port 631 Adapter blocks installation of rogue or corrupted firmware and verifies that the executing firmware is trusted via Hardware Root of Trust and Authentication. Stops unmanaged access to memory or storage with Device - level Firewall. This validates that on-device firmware and configuration data can only be accessed by authorized agents. Provides traceability into authenticated firmware updates by capturing changes in standard system logs. Boosting I/O Bandwidth with Lower Latency: The HPE Ethernet 10/25Gb 2-port 631 Adapter delivers single root I/O virtualization (SR-IOV) with the ability to run a large number of virtual machines (VMs) per server, which reduces the need for hardware and the resultant costs of space and power required by hardware devices. Reduces CPU Utilization and helps improve host VM density and server efficiency using remote direct memory access (RDMA) over Converged Ethernet (RoCE v2) for Live Migration, Microsoft SMB Direct environments. Realize Breakthrough Economics: The HPE Ethernet 10/25Gb 2-port 631 Adapter offloads packet processing to reduce CPU utilization and lower power with Tunnel Offloads (VXLAN and NVGRE). Speeds packet processing to service more I/O requests utilizing data plane development packet (DPDK)..This 25Gigabit Ethernet card will surely cater to the bandwidth requirements of the next-gen cloud and Web-scale environments.This 8000 MB/s bandwidth PCI Express 3.0 x8 adapter ensures easy connectivity and plug-in form-factor for affordable and reliable Ethernet network.This dual port 25gigabit ethernet card lets you add two network ports using a single expansion slot to a client, server or workstation.With the 20GBase-X technology get up to 20Gbps data transfer rate over the supported network cable

The Synology E10M20-T1 combines 10GbE networking and M.2 SSD caching in one PCIe card, boosting NAS performance and bandwidth simultaneously. It supports multiple Ethernet speeds and advanced offloading features for optimized network efficiency. Perfect for accelerating storage and connectivity without occupying multiple slots..Supports auto-negotiation up to 10Gb/s for flexibility..Advanced offloading features improve network efficiency..Ideal for boosting NAS speed and bandwidth together.

With Gen10 Plus ProLiant Servers, HPE offers the industry's most secure server platform. Through its Root of Trust server design down to the Network Interface Card (NIC), these security features are built-in so you can deploy with confidence. HPE Gen10 Plus servers will help prevent, detect and recover from cyberattacks such as denial of service and malware-infected firmware. Protecting applications, data and infrastructure from security breaches through storage and networking security technologies is first priority for HPE Gen10 Plus Servers. With Gen11 ProLiant Servers, HPE continues to offer industry-leading security and builds on Gen10 Plus features by adding support for SPDM security on select ethernet adapters..Ethernet adapter for Gen10 Plus ProLiant Servers.Provides data transfer rates up to 10Gbps.Contains two SFP+ ports.Features stand up profile with PCIe 3.0 x8.Power requirement: typical: 7.9 W; max: 9.1 W

HPE Gen10 Plus Ethernet Adapters HPE ProLiant DL, ML and Apollo Driven by hybrid cloud services, mobile data and streaming video applications, IT professionals are constantly challenged to deliver secure and reliable network bandwidth that cost-effectively scales to demands of the networking traffic. For any given workload, the right mix of performance, efficiency, reliability and security are paramount. HPE has your data center infrastructure covered with the latest networking adapters, switches, transceivers and cables for a complete end-to-end solution to support your various workload needs. With Gen10 Plus ProLiant Servers, HPE is offering the industry's most secure server platform. Through its Root of Trust server design down to the Network Interface Card (NIC), these security features are built-in so you can deploy with confidence. HPE Gen10 Plus servers will help prevent, detect and recover from cyberattacks such as denial of service and malware-infected firmware. Protecting applications, data and infrastructure from security breaches through storage and networking security technologies is first priority for HPE Gen10 Plus Servers..Enjoy superfast data transfer of up to 8000 MB/s with PCI Express 3.0 x8 card, between the network card and motherboards.This dual port 25gigabit ethernet card lets you add two network ports using a single expansion slot to a client, server or workstation.Supports optical fiber cable to span longer distances and provides data transmission rates par excellence between servers and network components.25GBase-X network technology for reliable connectivity with maximum productivity

HPE Gen10 Plus Ethernet Adapters HPE ProLiant DL, ML and Apollo Driven by hybrid cloud services, mobile data and streaming video applications, IT professionals are constantly challenged to deliver secure and reliable network bandwidth that cost-effectively scales to demands of the networking traffic. For any given workload, the right mix of performance, efficiency, reliability and security are paramount. HPE has your data center infrastructure covered with the latest networking adapters, switches, transceivers and cables for a complete end-to-end solution to support your various workload needs. With Gen10 Plus ProLiant Servers, HPE is offering the industry's most secure server platform. Through its Root of Trust server design down to the Network Interface Card (NIC), these security features are built-in so you can deploy with confidence. HPE Gen10 Plus servers will help prevent, detect and recover from cyberattacks such as denial of service and malware-infected firmware. Protecting applications, data and infrastructure from security breaches through storage and networking security technologies is first priority for HPE Gen10 Plus Servers..Enjoy superfast data transfer of up to 8000 MB/s with PCI Express 3.0 x8 card, between the network card and motherboards.For high bandwidth connectivity, add this efficient dual port 10gigabit ethernet card to your server or workstation.Supports optical fiber cable to span longer distances and provides data transmission rates par excellence between servers and network components.With the 10GBase-X technology get up to 10Gbps data transfer rate over the supported network cable

Solarflare's XtremeScale X2522 dual-port 10/25G Ethernet network adapters are designed for high-performance electronic trading environments and enterprise data centers; including artificial intelligence, big data, analytics, hyperscale, machine learning, storage, and telco applications. Solarflare's record-breaking low latency and high throughput network adapters provide real-time packet and flow information to thousands of virtual NICs. This combination of ultra-high bandwidth, ultra-low latency, ultra-scale connectivity, and packet telemetry allows X2 series adapters to scale with each server, virtual machine or container..Network adapter is great for high-performance electronic trading environments and enterprise data centers.10/25G link speed support.Contains PCIe Gen 3.1 x8, 25G SFP28 or 10G SFP+ direct attach copper or optical transceiver; SFP28 cages.Dimensions: 6.6"L x 2.7"W; PCI Express low-profile: 3.12"H.Meets or exceeds FCC, UL, CE, RoHS standards.NIC capabilities: MSI-X support, interrupt coalescing, 2x10/25G 64-byte line rate.Supports the precision time protocol (PTP) fabric service for apps that require synchronized time stamping of packets down to single-digit nanosecond resolution.ServerLock technology complements firewall perimeter security, it is now possible to scale security inside your data center by using microsegmentation to scale packet surveillance, filtering, cloaking, and firewalling with every server.Provides real-time monitoring, inspection, and capture of packets needed for network performance management, security analytics, and compliance.Tamper-resistant adapter.PTP Daemon delivers enhanced stability and clock synchronization accuracy and can be used to synchronize the adapter clock to external time source.Manageability and remote boot: PXE and UEFI, Solarflare secure boot, secure firmware upgrade, NC-SI over MCTP SMBus, PLDM over MCTP SMBus, MCTP PCIe VDM.Management and utilities: ethtool support, vCenter plug-in, Solarflare boot manager.Traffic engineering: XtremePacket engine for dedicated parsing, filtering, and flow steering, TCP/UDP/IP, MAC, VLAN, RSS filtering, accelerated receive flow steering (ARFS), transmit packet steering.NVMeoF-TCP plug-in for low latency, high-performance storage networking on standard Ethernet fabric.Virtualization: Linux multi-queue; VMware NetQueue; Microsoft Hyper-V virtual machine queue (VMQ); SR-IOV: 16 physical functions, 240 virtual functions; 2048 Guest OS protected vNICs; full hardware switch fabric in silicon capable of steering any flow based on Layer 2 to Layer 4 protocols, between physical and virtual interfaces; VXLAN, NVGRE, and GENEVE tunneling offloads, adaptable to custom overlays; VLAN and VLAN Q-in-Q insertion/stripping.3-year manufacturer limited warranty

The Xilinx XtremeScale series of Ethernet network adapters are designed for high-performance electronic trading environments and enterprise data centers; including artificial intelligence, big data, analytics, hyperscale, machine learning, storage, and telco applications. With record-breaking low latency and high throughput, XtremeScale network adapters provide real-time packet and flow information to thousands of virtual NICs. This combination of ultra-high bandwidth, ultra-low latency, ultra-scale connectivity, and packet telemetry allows X2 series adapters to scale with each server, virtual machine or container. For cloud data centers, Onload application acceleration software dramatically accelerates and scales network-intensive workloads such as in-memory databases, software load balancers, and web servers. With Onload, data centers can support 4X or more users on their cloud network while delivering improved reliability, enhanced quality of service (QoS), and a higher return on investment, without modification to existing applications. In electronic trading environments, Onload kernel bypass application acceleration and DPDK services deliver superior small packet performance with sub-microsecond hardware latency. In addition, XtremeScale adapters support the precision time protocol (PTP) fabric service for apps that require synchronized time stamping of packets down to single-digit nanosecond resolution..Ethernet network adapter is designed for high-performance electronic trading environments and enterprise data centers, including artificial intelligence, big data, analytics, hyperscale, storage, and more.Supports 10G/25 Gigabit Ethernet.Features 2x10/25G 64-byte line rate, PCIe 3.1 x16, QSFP28.NIC capabilities: MSI-X support, interrupt coalescing.Network acceleration: Data Plane Development Kit (DPDK) Poll Mode, Driver - packet, Onload -TCP/UDP, TCPDirect - TCP/UDP.Offers low-profile design with MD2.3-year manufacturer limited warranty

The Dell 540-BCOY Dual Port Marvell FastLinQ 41232 10/25GbE SFP28 OCP Network Interface Card is a high-performance network adapter designed for use in server environments. It provides two 10/25 Gigabit Ethernet ports that enable users to connect to high-speed networks with ease. This network adapter provides high-speed connectivity that enables users to transfer large amounts of data quickly and efficiently. The adapter supports speeds of up to 10/25 Gigabits per second, providing users with the bandwidth they need to support data-intensive applications and workloads..Gigabit Ethernet network adapter uses the OCP NIC 3.0 interface.Offers a maximum data transfer rate of 25,000 Mbps.Features two high-speed Ethernet ports for dual connectivity.Compatible with a wide range of Dell PowerEdge servers that support the OCP NIC 3.0 interface, including models like R650, R750, C6520, and T550