Hazard Class Placards
7 results
Moisture and tear-resistant sign made of adhesive vinyl. Measures 10-3/4" x 10-3/4"..4-Digit DOT Placard.Size: 10-3/4" x 10-3/4"..004" thick Adhesive Vinyl.1830 (Hazard Class 8).All-purpose, flexible 4-mil vinyl.Permanent acrylic adhesive back with peel-off liner.Moisture- and tear-resistant.Apply pressure-sensitive back to clean curved or uneven surfaces
Moisture and tear-resistant sign made of adhesive vinyl. Measures 10-3/4" x 10-3/4"..Size: 10-3/4" x 10-3/4"..004" thick Adhesive Vinyl.1993 (Hazard Class 3).All-purpose, flexible 4-mil vinyl.Permanent acrylic adhesive back with peel-off liner.Moisture- and tear-resistant.Apply pressure-sensitive back to clean curved or uneven surfaces
Comply with NFPA 704 with these Hazardous System Labels..Adhesive Vinyl.8"x8".Complies With All Safety Regulations.National Marker "Hazard Identification System Labels" Safety sign measures 8" x 8" and is made adhesive vinyl material for added durability.
This Full Frame Spacemaster System includes 8 placard panels in a single frame: Dangerous, Flammable Gas 2, Poison 6, Corrosive 8, Flammable Liquid 3, Oxidizer 5.1, Radioactive 7, Non-Flammable Gas 2, and Blank. These placards meet DOT specifications for transporting hazardous materials. Changing DOT placards when your load changes is as easy as the flip of a panel. Spacemaster eliminates the hassle and expense of replacing placards, so DOT compliance is virtually at your fingertips. Spacemaster frames are constructed of corrosion-resistant, fully formed rigid aluminum that provides superior durability, even under the toughest road conditions. Self-contained placard panels are constructed of aluminum alloy and mill roller-coated with white acrylic paint. Panels lock in place with 4 double-riveted stainless steel pressure fasteners. Legends are silkscreened with UV inks to retard fading, chipping or peeling. Spacemaster Full Frame, 8-Legend Flip Placard System for Trailers is sold per each..Placards included: Dangerous, Flammable Gas 2, Poison 6, Corrosive 8, Flammable Liquid 3, Oxidizer 5.1, Radioactive 7, Non-Flammable Gas 2, and Blank..Spacemaster eliminates the hassle and expense of replacing placards..Panels lock in place with 4 double-riveted stainless steel pressure fasteners..Spacemaster Full Frame, 8-Legend Flip Placard System for Trailers is sold per each..This Full Frame Spacemaster System includes 8 placard panels in a single frame: Dangerous, Flammable Gas 2, Poison 6, Corrosive 8, Flammable Liquid 3, Oxidizer 5.1, Radioactive 7, Non-Flammable Gas 2, and Blank.
This White Split Frame Spacemaster System includes 8 placard panels in a single frame: Dangerous Flammable Gas 2 Poison 6 Corrosive 8 Flammable Liquid 3 Oxidizer 5.1 Radioactive 7 Non-Flammable Gas 2 Blank Placards meet DOT specifications for transporting hazardous materials. Changing DOT placards when your load changes is as easy as the flip of a panel. Spacemaster eliminates the hassle and expense of replacing placards, so DOT compliance is virtually at your fingertips. Spacemaster frames are constructed of corrosion-resistant, fully formed rigid aluminum that provides superior durability, even under the toughest road conditions. Self-contained placard panels are constructed of aluminum alloy and mill rollercoated with white acrylic paint. Panels lock in place with 4 double-riveted stainless steel pressure fasteners. Legends are silkscreened with UV inks to retard fading, chipping or peeling. Spacemaster White Split Frame, 8-Legend Flip Placard System for Trailers is sold per each..Spacemaster with the following placards: Dangerous, Flammable Gas 2, Poison 6, Corrosive 8, Flammable Liquid 3, Oxidizer 5.1, Radioactive 7, Non-Flammable Gas 2, and Blank Placards.superior durability, even under the toughest road conditions.sold per each.This White Split Frame Spacemaster System includes 8 placard panels in a single frame.
This Split Frame Spacemaster System includes 8 placard panels in a single frame: Dangerous, Flammable Gas 2, Poison 6, Corrosive 8, Flammable Liquid 3, Oxidizer 5.1, Radioactive 7, Non-Flammable Gas 2, and Blank. These placards meet DOT specifications for transporting hazardous materials. Changing DOT placards when your load changes is as easy as the flip of a panel. Spacemaster eliminates the hassle and expense of replacing placards, so DOT compliance is virtually at your fingertips. Spacemaster frames are constructed of corrosion-resistant, fully formed rigid aluminum that provides superior durability, even under the toughest road conditions. Self-contained placard panels are constructed of aluminum alloy and mill roller-coated with white acrylic paint. Panels lock in place with 4 double-riveted stainless steel pressure fasteners. Legends are silkscreened with UV inks to retard fading, chipping or peeling. Spacemaster Split Frame, 8-Legend Flip Placard System for Trailers is sold per each..Include the following placards: Dangerous, Flammable Gas 2, Poison 6, Corrosive 8, Flammable Liquid 3, Oxidizer 5.1, Radioactive 7, Non-Flammable Gas 2, and Blank..Changing DOT placards when your load changes is as easy as the flip of a panel..Spacemaster eliminates the hassle and expense of replacing placards..Spacemaster Split Frame, 8-Legend Flip Placard System for Trailers is sold per each..This Split Frame Spacemaster System includes 8 placard panels in a single frame: Dangerous, Flammable Gas 2, Poison 6, Corrosive 8, Flammable Liquid 3, Oxidizer 5.1, Radioactive 7, Non-Flammable Gas 2, and Blank.
For the ultimate in convenience, flexibility and time saving, Duo-Flip allows you to change both DOT placard legends and ID numbers in seconds to match your commodity. This Duo-Flip, Full Frame, 4-Legend Flip Placard System includes 5 placard panels in a single frame: Flammable Liquid 3, Combustible 3, Poison 6, Corrosive 8 and Blank. Self-contained, .032 aluminum alloy placard panels slide over easily on four aluminum hinges. Notches in the aluminum panels allow you to flip numerals without interference. Panels lock in place with four stainless steel pressure fasteners. Duo-Flip's exclusive, deep-formed aluminum frame provides stability and excellent wind protection. Equipped with extra sturdy mounting holes, standard full frames fit virtually any type of cargo tank..Includes the following hazard class placards: Flammable Liquid 3, Combustible 3, Poison 6, Corrosive 8 and Blank.The ultimate in convenience, flexibility and time saving.Fits virtually any type of cargo tank.Duo-Flip allows you to change both DOT placard legends and ID numbers in seconds to match your commodity
You May Also Like
Slidemaster Placard Holder for Trucks meets Labelmaster's exacting standards for top quality construction. This slide-in placard holder features Easy-Off Ramp, an innovative device that glides placards over the retaining clip, so they slide in or out without a hitch. Built with rugged riveted assembly, drain hole and stainless steel clip, Slidemaster holders accommodate metal placards and non-adhesive placards in polycoated tagboard and 20-mil rigid vinyl. Full frame, Slidemaster Slide-In Placard Holder comes with baked-on white polyester finish on sturdy .032 aluminum..Top quality construction.Easy-Off Ramp, an innovative device that glides placards over the retaining clip.Slide-In Placard Holder comes with baked-on white polyester finish.White Slidemaster Placard Holder for Trucks
Extend the life and appearance of your placards with this economical Placard Holder Shield. Constructed of sturdy .030 extruded plastic, this shield helps protect metal, tagboard and rigid vinyl placards from falling or blowing out of their Slidemaster placard holders. The shield also helps to retard deterioration due to harsh weather, dirt and rough road conditions. Clear Plastic Placard Holder Shield is made with rounded corners that permit easy insertion in all Slidemaster Slide-In Placard Holders for trucks. Priced per each..Constructed of sturdy .030 extruded plastic.The shield also helps to retard deterioration due to harsh weather, dirt and rough road conditions..Priced per each..Extend the life and appearance of your placards with this economical Placard Holder Shield.
Slidemaster Placard Holder for Trucks meets Labelmaster's exacting standards for top quality construction. This slide-in placard holder features Easy-Off Ramp, an innovative device that glides placards over the retaining clip, so they slide in or out without a hitch. Built with rugged riveted assembly, drain hole and stainless steel clip, Slidemaster holders accommodate metal placards and non-adhesive placards in polycoated tagboard and 20-mil rigid vinyl. Featuring superior durability, this full frame, treated .032 anodized aluminum Slidemaster is weather resistant and retards oxidation..Slidemaster holders accommodate metal placards and non-adhesive placards in polycoated tagboard and 20-mil rigid vinyl.Featuring superior durability, this full frame, treated .032 anodized aluminum.Slidemaster is weather resistant and retards oxidation..Built with rugged riveted assembly, drain hole and stainless steel clip
Slidemaster Placard Holder, Mill, Full.Placard holder.Easily slide your placards into the Slidemaster.Sold per each.Slidemaster Placard Holder, Mill, Full
Slidemaster Placard Holder for Trucks meets Labelmaster's exacting standards for top quality construction. This slide-in placard holder features Easy-Off Ramp, an innovative device that glides placards over the retaining clip, so they slide in or out without a hitch. Built with rugged riveted assembly, drain hole and stainless steel clip, Slidemaster holders accommodate metal placards and non-adhesive placards in polycoated tagboard and 20-mil rigid vinyl. Featuring superior durability, this split frame, treated .032 anodized aluminum Slidemaster is weather resistant and retards oxidation. Split frame construction allows two parts of the Slidemaster frame to follow the action of 12" roll-up rear door panels without impediment. Split frame Slidemaster, DOT Placard System is priced per each..Slidemaster Placard Holder for Trucks meets Labelmaster's exacting standards for top quality construction.Featuring superior durability, this split frame, treated .032 anodized aluminum.DOT Placard System is priced per each..Slidemaster is weather resistant and retards oxidation.
Slidemaster Placard Holder for Trucks meets Labelmaster's exacting standards for top quality construction. This slide-in placard holder features Easy-Off Ramp, an innovative device that glides placards over the retaining clip, so they slide in or out without a hitch. Built with rugged riveted assembly, drain hole and stainless steel clip, Slidemaster holders accommodate metal placards and non-adhesive placards in polycoated tagboard and 20-mil rigid vinyl. Split frame, Slidemaster Slide-In Placard Holder comes with baked-on white polyester finish on sturdy .032 aluminum. Split frame construction allows two parts of the Slidemaster frame to follow the action of 12" roll-up rear door panels without impediment. Split frame Slidemaster, DOT Placard System is priced per each..Built with rugged riveted assembly, drain hole and stainless steel clip.Split frame construction allows two parts of the Slidemaster frame to follow the action of 12" roll-up rear door panels without impediment.Split frame Slidemaster, DOT Placard System is priced per each..Slidemaster Placard Holder for Trucks meets Labelmaster's exacting standards for top quality construction.
Slidemaster Placard Holder for Trucks meets Labelmaster's exacting standards for top quality construction. This slide-in placard holder features Easy-Off Ramp, an innovative device that glides placards over the retaining clip, so they slide in or out without a hitch. Built with rugged riveted assembly, drain hole and stainless steel clip, Slidemaster holders accommodate metal placards and non-adhesive placards in polycoated tagboard and 20-mil rigid vinyl. Split frame, Slidemaster Slide-In Placard Holder comes with a shiny brite mill metal finish on .032 aluminum. Split frame construction allows two parts of the Slidemaster frame to follow the action of 12" roll-up rear door panels without impediment. Split frame Slidemaster, DOT Placard System is priced per each..Easy-Off Ramp, an innovative device that glides placards over the retaining clip.Built with rugged riveted assembly.Priced per each.Slidemaster Placard Holder for Trucks
Showcase documents with this frame, which measures 8.5 x 11 inches. This NuDell frame is ideal for both horizontal and vertical displays, and the face features unbreakable protective plastic for added durability..This frame can be used to display important awards, prestigious certificates, and more.Can be conveniently mounted on the wall for easy viewing.Dual frame orientation.Made of plastic with black finish and stylized gold accent trim.Holds one document or certificate.Certificate size: 8.5"W x 11"L.Features an unbreakable protective plastic face and cardboard back plate.⚠ ADVERTENCIA: Cáncer y Daños reproductivos -www.P65Warnings.ca.gov.⚠ WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov.Display documents easily by using this NuDell EZ Mount black with gold border document frame.
Simple but effective photo mounting technique. Slide photos into the appropriate size sleeve, remove the pressure sensitive backing strip, and press into place. Mounted photo is protected from dirt and fingerprints by the inert Mylar sleeve. Package of 25..Simple but effective photo mounting technique.Slide photos into the appropriate size sleeve, remove the pressure sensitive backing strip, and press into place.Mounted photo is protected from dirt and fingerprints by inert Mylar sleeve.Package of 25.Size: 4" x 6".amount: pack of 25.size: 4 in. x 6 in.
Ghent's Champion wall-mounted cases are the ideal choice when space is limited. Strong anodized aluminum framing houses tempered glass and comes complete with built-in locks. Interior bottom is solid white laminate..Ideal choice when space is limited..Anodized aluminum framing..Sliding tempered glass doors with built-in locks..Interior bottom - solid white laminate..Can be mounted next to each other to create an entire wall display..Limited Lifetime Warranty..Made in the USA..⚠ WARNING: This product can expose you to chemicals including Wood Dust, which are known to the State of California to cause cancer. For more information, visit www.P65Warnings.ca.gov
This Brainboxes metal mounting clip clicks securely onto 22.5mm deep modular devices. It is useful for mounting Brainboxes ED/SW/ES industrial range products at any orientation to any surface/wall to best utilize..This metal mounting clip clicks securely onto 22.5mm deep modular devices.Dimensions: 0.39"H x 1.18"W x 0.39"D.Meets or exceeds IEC 60715, EN 50022 standards.Lifetime manufacturer limited warranty
Cost effective and versatile facility sign. Durable and distinctive sign holder design with silver and black accents. Anti-glare sheet protector keeps inserts clean and easy to read. Adapts for desktop, wall mount and partition wall use (mounting hardware included)..Cost effective and versatile facility sign..Anti-glare protective sheet is easy to slide in-slide out making sign changes a breeze..Features a blend of silver and black accents for a distinctive look..Versatile mounting options allow for tabletop, wall and fabric cubicle surfaces..Includes mounting hardware..Patented.8 1/2" x 2" upscale sign holder features a blend of silver and black accents creating a distinctive look.
Use this frame to keep your diploma, certification, or award visible and displayed. This frame is black with a gold accent for a sleek look, perfect for use in an office or at home. This NuDell EZ Mount certificate frame is meant to be mounted on the wall and can be hung with either landscape or portrait orientation..This frame can be used to display important awards, prestigious certificates, and more.Can be conveniently mounted on the wall for easy viewing.Horizontal or vertical document frame to showcase your favorite photographs.These certificate frames are made of plastic.Holds one picture or photo.Photo size: 8.5"W x 11"L.Frame with the included cardboard back plate.⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.Display certificates or awards with this NuDell EZ Mount certificate frame.
The Zebra BRKT-LM0093C-04 is a precision-engineered locking mount bracket designed to securely anchor Zebra DS9300 Series presentation barcode scanners, such as the DS9308, to countertops and flat surfaces. Ideal for use in retail, hospitality, and point-of-sale environments, this bracket ensures that your scanner remains fixed in place, preventing accidental dislodging or unauthorized removal. Made from durable, high-quality plastic and finished in a sleek midnight black, it seamlessly integrates into modern workspaces. The surface-mount bracket is compact and easy to install, offering both convenience and added physical security in high-traffic areas..This is a locking mount bracket accessory, designed to securely hold Zebra DS9300 Series barcode scanners in place, ideal for use in retail, hospitality, and point-of-sale environments..Compact and lightweight, with a design tailored to fit the footprint of the DS9308 scanner base; its shipping weight is approximately 1.6 pounds..Compatible with Zebra DS9300 Series scanners and does not require an operating system, as it functions as a physical mounting solution.
Ghent's Champion wall-mounted cases are the ideal choice when space is limited. Strong anodized aluminum framing houses tempered glass and comes complete with built-in locks. Interior bottom is solid white laminate..Ideal choice when space is limited..Anodized aluminum framing..Sliding tempered glass doors with built-in locks..Interior bottom - solid white laminate..Can be mounted next to each other to create an entire wall display..Limited Lifetime Warranty..Made in the USA..⚠ WARNING: This product can expose you to chemicals including Wood Dust, which are known to the State of California to cause cancer. For more information, visit www.P65Warnings.ca.gov
Device Supported: Menu Board.Limited Warranty: 10 Year.Fusion FMSITL Mounting Adapter