HDD Data Cables
3 results
Here's a fast, easy way to access data on a 2.5" solid-state or hard drive. This cable-style adapter lets you connect your laptop or desktop computer directly to a solid-state drive and access it through ultra-fast USB 3.1 Gen. 2 (up to 10 Gbps). With the adapter cable, you can quickly swap hard drives without having to install your drives into an enclosure. You can copy or retrieve data from a 2.5" SSD/HDD quickly with no additional accessories required. It gives you easy drive access for data migration, drive cloning and data backup applications, with the fast performance of USB 3.1 Gen 2. USB 3.1 Gen 2 gives you greater bandwidth and speed with rates of up to 10 Gbps - twice the speed of USB 3.0 (USB 3.1 Gen 1) technology. It lets you leverage the high performance of the latest SSDs and hard drives, while alleviating bottlenecks in your data transfers. This cable-style adapter features a compact, lightweight design that tucks easily into a laptop bag or carrying case. Use it wherever you go to access valuable data quickly - with no external power required..QUICKLY ACCESS A SATA SSD OR HDD: This USB 3.1 to SATA cable delivers instant access to your 2.5" SATA drives from your laptop or computer; The adapter is compatible with SATA I, II and III (up to 6Gbps) NOTE: Supports 2.5" SATA drives only. For 3.5" drives please see our USB312SAT3.FAST TRANSFER SPEEDS & UASP SUPPORT: The SATA hard drive adapter cable lets users experience enhanced performance and super-fast data transfer speeds with support for USB 3.1 (10Gbps) and UASP.CONNECT FROM ANYWHERE: The external HDD / SSD storage converter delivers perfect portability, tucking away nicely in a laptop bag; The cable-style adapter is USB-powered so no external power cords are required.1 x SATA/Power.PLUG-AND-PLAY: Access any 2.5" hard drive or solid-state drive from any USB enabled computer by simply plugging in the SATA adapter cable; you can easily swap between drives with no need to install the drive inside an enclosure.Black.Connect a 2.5" SATA SSD/HDD to your computer using this USB 3.1 Gen 2 ultra-portable cable
The C2G ® 18" SATA male/male 180 deg 7-pin red data transfer cable delivers enhanced throughput and reduced data packet loss. It transmits data at the rate of 6 Gb/s. This 1-device cable offers upsurge data transmission rates, diminished crosstalk, minimized clutter and improved signal integrity to boost your potential transfer rate. It forecasts less overheating and emancipates internal space within the CPU unit that leads for easy movement during adding or removing of hard drives, PCI cards or other adapters..Female SATA.18".Red
Connect a 2.5" or 3.5" SATA SSD/HDD to your USB-C enabled computer, with this USB 3.1 adapter cable. This USB-C™ to SATA adapter cable gives you fast and easy access to the data on your 2.5 in./3.5 in. solid-state drives and hard drives. The adapter cable lets you connect your USB-C enabled laptop or desktop computer directly to a SATA drive and access it through ultra-fast USB 3.1 Gen. 2 (up to 10Gbps)..Connect a 2.5"/3.5" SATA drive to your USB-C enabled laptop or desktop computer, for quick access to your external data.Fast data transfer rates through USB 3.1 Gen 2 (10Gbps).Integrated 1 m cable, for convenient use.Certifications and standards: WEEE, RoHS
You May Also Like
This high-quality Serial ATA cable is designed for connecting SATA drives even in tight spaces. Featuring convenient latching connectors, the cable offers secure connections for SATA hard drives and motherboards..Features a thin cable design, which helps reduce clutter and increase airflow within the computer/server case, for optimum system performance.Backed by StarTech.com lifetime warranty, ensuring a dependable connection.2x Latching SATA connectors.Supports full SATA 3.0 6Gbps bandwidth.Compatible with both 3.5" and 2.5" SATA hard drives.Provides 18" in cable length.Male SATA
StarTech Drive Docking Station.Device Type: HDD docking station - external.Bays: 1.Bus Type: eSATA, USB 3.1 (Gen 2).Color: Black.Expansion Bays: 1 x hot-swap - 2.5" / 3.5" shared.Hard Drive Form Factor Compatibility: 2.5", 3.5".Interface: SATA 6Gb/s
Startech® 8.3" USB 3.0 to 2.5" SATA III Hard Drive Adapter Cable W/UASP/SATA to USB3.0 Converter is an external drive adapter that gives you quick and easy access to a SATA drive through the USB-A port on a laptop. The cable supports USB 3.0 data transfer speeds of 5Gbps. But, you can experience transfer speeds up to 70% faster than conventional USB 3.0, when connected to a computer that also supports UASP. With UASP you can utilize the full potential of a SATA III SSD or HDD. UASP is supported in Windows® 8, Mac OS X (10.8 or above), and Linux®..QUICKLY ACCESS A SATA SSD OR HDD: Connect to a 2.5in SATA SSD (solid state drive) or HDD (hard disk drive) to add storage, perform backups, create disk images, recover data, and transfer content to your laptop; For 3.5in drives please see our USB312SAT3.FAST TRANSFER SPEEDS: The SATA to USB adapter supports USB 3.0 data transfer speeds of 5Gbps over USB-A, plus you can experience transfer speeds up to 70% faster than conventional USB 3.0 when connected to a computer that also supports UASP.Black.CONNECT FROM ANYWHERE: The hard drive USB adapter cable is a portable solution that tucks away nicely in a laptop bag with no external power required.SAVE TIME: The hard drive transfer cable lets you conveniently swap between drives with no need to install the drive inside an enclosure, just plug and play into a USB-A host system.THE IT PRO’S CHOICE: Designed and built for IT Professionals, this USB 3.0 to SATA cable is backed for 2 years, including free lifetime 24/5 multi-lingual technical assistance.Supports USB 3.0 data transfer speeds of 5Gbps and is backward compatible with USB 2.0.Copper.SATA to USB Adapter Cable | SATA III 6Gbps | 2.5" SSD or HDD | USB 3.0 | Portable
StarTech.com® SAT2M2NGFF25 M.2 SSD to 2.5" SATA III Adapter has aluminum and plastic enclosure for long lasting durability. Protects your M.2 NGFF SSD in any 2.5" application with protective housing. Adapter reduces your data transfer bottleneck with maximum file transfer speeds up to 6 Gb/s. Supports multiple drive heights like 2242/2260/2280 for wide compatibility with all of the common M.2 solid state drives..M.2 to SATA III adapter helps you to convert M.2 NGFF solid state drive into a standard 2.5" form factor.Measures 0.3"H x 2.7"W x 3.9"D.Comes in black color for new look.Has internal board form factor, data transfer rate of 6 Gb/s and supports solid state drive devices.Has fixed drive installation for convenience.Suitable for M.2 drive types.Has 1 drive for convenience.Supported 2242, 2260, 2280 drives.Features SATA III interface with 7+15 pin SATA data and power combo receptacle connector for good connectivity.Has aluminum and plastic enclosure for long-lasting strength.Allows you to add M.2 SSD performance to any computer system by converting M.2 to SATA.M.2 NGFF SSD comes with enclosed housing for protection in any 2.5in application.Operates at a temperature of 32 to 122 deg F, storage temperature of 14 to 185 deg F and humidity of 5 - 95percentage RH.Comes with M.2 NGFF SSD to 2.5" SATA adapter, SSD mounting kit, housing mounting kit, mini screw driver and instruction manual.Weighs 1.8 oz.Comes with 2 years warranty.StarTech.com® Black SATA III adapter allows to convert M.2 NGFF solid state drive into a standard 2.5" form factor. Supports maximum data transfer rate of up to 6 Gb/s.
This StarTech USB 3.0 Hard Drive Docking Station delivers full, instant access to any 2.5-inch or 3.5-inch SATA (SATA, SATA II, SATA III) hard drive (HDD) or solid state drive (SSD), without having to mount the drive in a computer or install it in an external enclosure. Large capacity drives (tested with up to 4TB 3.5"" and 1TB 2.5"" drives) greatly enhance your computer's storage/backup capabilities..SuperSpeed USB 3.0 compliant host interface, with transfer rates up to 5Gbps. High Speed USB 2.0 compliant host interface, with transfer rates up to 480Mbps.Supports 2.5" and 3.5" form factor SATA hard drives (HDD) and solid state drives (SSD).Dimensions 2.6"(H) x 3.7"(W) x 5.7"(L).1 Expansion bay.Compatible with SATA revision 1/2/3 (1.5/3.0/6.0 Gbps) drives.Compact, desktop-style form factor in a solid black color.Drive connectors: 1 - SATA data and power combo (7+15 pin) receptacle.Host connector: 1 - USB 3.0 B (9 pin; SuperSpeed) female.Compatible with Microsoft Windows, Apple OSX, Linux, and Google Chrome OS.Certifications and standards CE, FCC, RoHs.2-Year Limited Warranty.A top slot-loading design and unique drive ejection mechanism provides quick and easy access to the data without having to install drives into an enclosure or tray.LED indicators 1 - power and activity (solid - power, blinking - activity); Power 12 VDC, 2.5A.Temperature 41 - 176 deg F operating, -40 - 158 deg F Storage; Humidity 8 - 80 percent RH.OS compatibility Windows 2000 XP (32 64-bit) Server 2003 (32 64-bit) Server 2008 R2 Vista (32 64-bit) 7 (32 64-bit) 8 (32 64-bit), Linux 2.6.31 and up.Insertion rating 15000 cycles.Includes USB 3.0 HDD dock, USB 3.0 cable, universal power adapter, 3 x power adapter plug (NA EU UK), instruction manual.Certifications and standards CE, FCC, RoHs.Warranty 2 years limited.StarTech USB 3.0 SATA II Hard Drive Docking Station is capable of transfer speed up 5 Gbps, making it the fastest way to access data from an external drive.
The Startech.com ® 3' adapter cable enables you to connect external eSATA hard drive, solid state drive or optical disc drive to your USB-enabled computer system. This USB 3.0 to SATA HDD/SSD/ODD adapter cable supports transfer speeds up to 5 Gb/s through USB 3.0 and efficiently maximizes storage/backup capabilities of your computer. It is compatible with virtually any eSATA device and allows a hassle-free connection with easy plug-and-play installation..Comes in black color and this 3' adapter cable supports up to 5 Gb/s data transfer rate.Cable length: 3'.Connections: eSATA to USB.Interface: USB 3.0.First end connection: one 7-pin eSATA female.Second end connection: one 9-pin type A USB male.Compatible with USB 3.0/2.0/1.1.Chipset ID: ASM1153E.Dimensions: 0.4"H x 0.9"W x 35.8"L.Supports data transfer rates up to 6 Gb/s and works well without any driver or software installation.Currently tested with up to 4TB, 7200 RPM hard drives drive capacity for optimal performance.Temperature: 0 to 60 deg C (operating), -10 to 70 deg C (storage).Contains one USB cable and installation guide.Meets CE, FCC, RoHS standards and certifications.Weight: 2.8 oz..Comes with 2 years warranty.The StarTech.com 3' SATA 6 Gbps eSATA Hard Drive to USB 3.0 Adapter Cable comes with plug-n-play installation that ensures hassle-free usage without the need of driver installation.
The StarTech.com® USB312SAT3 plastic SATA to USB adapter cable is suitable for 2 1/2" and 3 1/2" SATA drives, which provides you fast and easy access to the data. The black adapter cable connects your laptop or desktop computer directly to a SATA drive and accesses it through ultra-fast USB 3.1 Gen. 2..Adapter cable provides you fast and easy access to the data.Black plastic.Dimensions: 2 1/2" cable length.Connector: 1 x 22-pin SATA on first end, 1 x 9-pin Type A male USB 3.1 on second end.Data transfer rate: 1.25 Gbps.Compatible with 2 1/2" and 3 1/2" SATA drives.Device supported: Solid state drive, hard drive, storage device, notebook.110 - 240 VAC, 0.6 A (input), 12 VDC, 2 A (output).Power/activity LED indicator.Tool-free design, for easy drive installation.UASP support.Temperature: 32 - 140 deg F.Includes universal power adapter (NA/UK/EU/AU), quick start guide.Meets RoHS, WEEE standards.Weight: 0.12 lbs.
StarTech 2.5" to 3.5" SATA Hard Drive Adapter Enclosure.Hard drive accessory type: SATA hard drive adapter enclosure.Dimensions: 1.4"(H) x 4"(W) x 5.7"(L).Interfaces: Drive connector: SATA/600.Support for SATA revision I/II/III (1.5/3/6 Gbps), tool less installation, supports 2.5" SSD/HDD up to 12.5 mm in height, standard 3.5" HDD mounting points, material: Aluminum, plastic.Drive connectors: 1 x SATA data and power combo (7+15-pin), host connectors: 1 x SATA data and power combo (7+15-pin).Data transfer rate: 6 Gbps SATA III.Max drive capacity: Currently tested with up to 1TB 7200 RPM hard drives.Operating temperature: 5 - 55 deg C, humidity: 5 - 85%RH.Drive size: 2 1/2", drive installation: Removable.Supports 2 1/2" SSD/HDD up to 12.5 mm in height, SATA revision I/II/III (1.5/3.0/6.0 Gbps).Improve the performance speed of any 3 1/2" hard drive application by adapting a 2 1/2" solid state drive.Tool less installation.I/O expansions: Number of total expansion bays: 1, number of 2 1/2" bays: 1.Includes 1 x 2 1/2" to 3 1/2" SATA HDD/SSD enclosure, 1 x screw kit, 1 x install guide.Weight: 9.2 oz..Warranty: 2 years limited.Startech.com® 2 1/2" to 3 1/2" SATA hard drive adapter enclosure has internal form factor and includes serial ATA/600 drive interface.
The SATA6LA1 Left Angle (90-degree) SATA Cable features a standard (straight) SATA receptacle as well as a left-angled SATA receptacle, providing a simple 6-inch connection to a Serial ATA drive, with full SATA 3.0 bandwidth support of up to 6Gbps when used with SATA 3.0 compliant drives. The left-angled SATA connection enables you to plug in your Serial ATA hard drive in hard to reach areas or tight spaces, while the low profile and flexible design of the cable improves airflow and reduces clutter in your computer case, helping to keep the case clean and cool. Constructed of only top quality materials and designed for optimum performance and reliability this 6" SATA cable is backed by our lifetime warranty. As an alternative, StarTech.com also offers a 6in Right Angle SATA cable (SATA6RA1), which provides the same simple installation as this left angled SATA cable, but allows the cable to connect to the SATA drive from the opposite direction..Features a thin cable design, which helps reduce clutter and increase airflow within the computer/server case, for optimum system performance.Backed by StarTech lifetime warranty, ensuring a dependable connection.1x Left-angled/90-degree SATA connector.Supports full SATA 3.0 6Gbps bandwidth.Compatible with both 3.5" and 2.5" SATA hard drives.Provides 6" in cable length.Cable shield type: Aluminum-mylar foil with braid.Connector style: Straight.Wire gauge: 28 AWG.Dimensions: 0.3"(H) x 0.6"(W).Type and rate: USB 2.0: 480 Mbit/s.Provides a reliable solution for charging and syncing your Micro USB smartphone or tablet with your PC or Mac computer, through an available USB port.Allows you to charge while comfortably using your tablet or smartphone.Weight: 1.5 oz..Warranty: Lifetime.Make a left-angled connection to your SATA Drive, for installation in tight spaces
This StarTech 6TB USB 3.1 hard drive single-bay dock features a HDD ejection button that permits fast and simple drive removal. The top-loading design provides easy drive access and multi-function LED indicators for user convenience. It access data from one 2.5 or 3.5" SATA SDD/HDD over ultra-fast USB 3.1 Gen 2. It supports USB 3.1 and UASP with file transfer speeds of up to 6 Gbps. An UASP support provides better performance while USB type-A to B cable for easy compatibility..Drive capacity of up to 6TB for reliable data storage.Features serial ATA/600 drive interface for more efficient data transfer.Operates at 100 - 240 VAC, 0.8 A input and delivers 12 VDC, 2 A output.Made of plastic for durability.Drive size: 2.5".Has external form factor.Supports USB 3.1 Gen 2 with file transfer speed of up to 10 Gbps and SATA III with file transfer speed of up to 6 Gbps.Number of 2.5" bays: 2.Max drive height: 0.4".Features SATA data and power combo receptacle for drive connection.Top-loading design with built-in ejection button for easy drive access, UASP support for enhanced performance.Backward compatible with USB 3.0, 2.0 and 1.x.Back up data quickly to an external drive for archiving.Perfect for system builders and IT professionals who need quick access to drives for imaging.Dimensions: 2.5"H x 3.6"W x 5.7"D.Temperature: 5 - 35 deg C operating, -20 - 50 deg C storage, Humidity: 20 - 80% RH.Includes USB 3.1 HDD dock, USB cable, universal power adapter, 4 power adapter plugs, quick install guide.Meets FCC, CE, RoHS certification and standards.Weight: 14 oz..Comes with 2 years warranty.The StarTech 6TB USB 3.1 hard drive single-bay dock in black, is compatible for use with 2.5"/3.5" SATA SSD/HDD drives.
Startech.com® USB3.0 Dual hard drive docking station measures 2.8" x 5.2" x 5.8" with serial ATA/600 drive interface and offers removable drive installation. Docking station has independent power buttons for each hard drive..Hard drive accessory type: Docking station.Number of total expansion bays: 2, number of 5.25" bays: No, number of 2.5"/3.5" bays: 2.Black.Drive interface: Serial ATA/600, form factor: External, power source: AC adapter, drive installation: Removable, chipset ID: VIA/VLI - VL812, ASMedia ASM1053E.Host interface: USB 3.0, material: Plastic.Input voltage: 120 - 230 VAC, input current: 1.3 A, output current: 3A, output voltage: 12 DC.Dimension: 2.8"(H) x 5.2"(W) x 5.8"(D).Temperature: 5 to 35 deg C (operating), -20 to 50 deg C (storage), Humidity: 20 to 80%RH.OS compatibility: Windows 8/8.1 (32/64bit), 7 (32/64bit), Server 2008 (32/64), Vista(32/64), Server 2003 (32/64) XP(32/64), 2000, Apple® Mavericks (10.9) OSX Mountain Lion (10.8), Lion (10.7), Snow Leopard (10.6), Linux, Google Chrome™ OS.Compatible with: SATA revision I/II/III (1.5/3.0/6.0 Gbps) drives.Drive connectors: 2 - SATA data & power combo (7+15 pin) receptacle, Host connectors: 1 - USB 3.0 B (9 pin; superspeed) female.UASP support: Yes.Max drive capacity: Currently tested with up to 4TB 7200 RPM 3.5"Hard drives per bay (8TB total) and 2TB 5900 RPM 2.5"Hard drives (2TB total), Insertion rating: 15000 Cycles.Platform supported: PC, Mac, Linux.Certifications and standards: FCC, CE.Green compliance certificate/authority: RoHS.Package contents: USB 3.0 to dual 2.5/3.5in SATA hard drive docking station, 1 x 3ft (1m) USB 3.0 cable, 1 x universal power adapter (NA/UK/EU), 1 x instruction manual.Weight: 1.10 lbs..Warranty: 2 years limited.Startech.com® USB3.0 Dual docking station hard drive in black color is constructed out of plastic material for long durability.
Expand your storage capabilities with the StarTech M.2 USB 3.2 External SATA Hard Drive Enclosure. Designed for high-speed data transfer, this enclosure supports both PCIe NVMe and SATA M.2 SSDs, offering universal compatibility. The USB 3.2 Gen 2 (10Gbps) connection ensures rapid performance, while the tool-free installation allows for quick and hassle-free setup. Encased in durable aluminum, it provides efficient heat dissipation to protect your SSD. Compact and portable, this enclosure is an ideal solution for on-the-go professionals and tech enthusiasts seeking a reliable external storage upgrade..Compatible w/PCIe M.2 NVMe, SATA AHCI M.2 SSDs.USB 3.2 Gen 2 10Gbps; UASP support; PCI Express 3.0 w/4.0 compatibility.For PCIe (M-Key), SATA (B+M-Key) drives sized 2230/2242/2260/2280; Not compatible with 22110mm.USB Type-C, USB Type-A cables; Tool-less drive installation; Works with Windows, Mac, Chrome, Linux, Ubuntu, iOS (iPhone 15 [Plus/Pro/Max] and up).Portable M2 NGFF SSD Case Adapter with aluminum housing protects SSD and provides heat dissipation
This slim, pocket-sized drive enclosure is specifically engineered for 7mm drives, giving you the option to turn your thin hard drive or solid state drive into an external storage solution connected through UASP-enabled USB 3.0. With a thin yet durable design, the enclosure fits your 7mm drives perfectly to eliminate any drive movement inside the enclosure, which could be a problem with a looser-fitting enclosure. To help save you time transferring data to and from your 7mm SSD or HDD, this UASP-enabled enclosure supports transfer speeds up to 70% faster than traditional USB 3.0, when used with a UASP-enabled host computer. Plus, the enclosure is USB-powered, so you don’t have to carry a power adapter with you, giving you one less thing to pack when you’re travelling. To ensure compatibility with your computer system, the S2510BPU337 supports all of the leading operating systems, including: Microsoft Windows® (8/7/Vista/XP/Server 2008/Server 2003), Apple® OSX (10.9/10.8/10.7/10.6), Linux, and Google Chrome OS™..Compatible with 2.5" SATA III SSD and HDD drives up to 2TB.Enclosure connects to your computer via USB 3.0.USB powered, no external power adapter required.Compatibility: Mac, PC.Material: Plastic.Color: Black.Weight: 0.08 lbs..Warranty: 3 Years.Turn a 7mm high 2.5in SATA III SSD/HDD into a UASP-supported USB 3.0 External Drive
Startech.com® 40-Pin IDE PATA to SATA adapter converter provides ODD support which allows you to add Blu-ray, DVD or CD-ROM drives to an older IDE motherboard. Converter provides support for 48-bit logical block addressing..Hard drive accessory type: IDE to SATA adapter converter.Red.Dimensions: 0.9"(H) x 0.8"(W).Chipset ID: Marvell 88SA8852.Connector type: 1 x IDE (40 Pin, EIDE/PATA), 1 x SATA data and power combo (7+15 pin), 1 x SP4 (4 pin small drive power).Maximum data transfer rate: 133 Mbps.Blu-ray, DVD and CD-ROM drive compatibility with ODD (Optical Disk Drive) support, from an IDE host connection.Hassle free installation, with no software CD required.Support for 48-bit logical block addressing.Compliant with SATA revision 1.0 specification, compatible with Ultra ATA 133 specification.Supports 2 1/2", 3 1/2", and 5 1/4" SATA drives.Internal solution for connecting your SATA hard drive to a motherboard supporting an IDE interface.Ideal for use with older motherboards that do not support SATA.Compatibility: Blu-ray drive, DVD drive, CD-ROM drive.Environmental info: 5 - 50 Deg C operating temperature, 15 - 90% relative humidity.System requirements: An IDE controller and ATA cable.Certifications and standards: FCC, RoHS.Includes 40-pin IDE PATA to SATA adapter converter for HDD/SSD/ODD, 1 x LP4 Molex to SP4 power cable, 1 x instruction manual.Warranty: 2 years limited.Startech.com® 40-Pin IDE PATA to SATA adapter converter helps to connect a SATA device to an IDE/ATA motherboard and is ideal for use with older motherboards that do not support SATA.
Startech.com® M.2 NGFF SSD to 2.5" SATA adapter converter is supported with PC, Mac as well as Linux platform and has 1 expansion bay. Adapter converter helps to reduce data transfer bottleneck with file transfer speed up to 6 Gb/s..Interfaces/ports: Drive: 1 - M.2 (NGFF) receptacle, host: 1 - SATA Data & Power Combo (7+15 pin) receptacle.No of expansion bays: 1.Maximum data transfer rate: 6 Gb/s, Type and rate: SATA III.Maximize system speed by adding M.2 SSD performance.Help protect the health of your drive with an open-frame design that maximizes heat dissipation.Reduce overall power consumption, with a high efficiency M.2 SSD.Drive type: M.2 (NGFF).OS compatibility: Windows XP (32/64 bit)/ Server 2003 (32/64 bit)/ Server 2008 R2/ Server 2012/ Vista (32/64 bit)/ 7 (32/64 bit)/ 8/8.1 (32/64 bit) Mac OS X, Linux.Operating temperature: -40 - 185 deg F.Included: 1 x M.2 NGFF SSD to 2.5in SATA SSD Converter, 1 x mounting screw kit, 1 x installation manual.Dimensions: 0.3"(H) x 2.8"(W) x 3.9"(D), 1.3 oz..Warranty: 2 years limited.Startech.com® M.2 NGFF SSD to 2.5" SATA adapter converter has an open-frame design to maximize heat dissipation and reduces the power consumption over regular platter drives.
Use this SATA hard drive docking station to gain quick access to two of your 2.5" or 3.5" SATA III SSDs/HDDs - Access two 2.5/3.5” SATA hard drives or solid state drives simultaneously and hot swap drives in and out of this HDD docking station - Dual Bay SATA HDD Docking Station features plug-and-play functionality - Gen 1 USB 3.1 hard drive dock with data transfer speeds of up to 5Gbps (AKA USB 3.0) / SATA docking station / SSD docking station / SATA drive dock / USB3 HDD docking station.Access two 2.5/3.5” SATA hard drives (HDD) or solid state drives (SSD) simultaneously and hot swap drives in and out.USB 3.0 with data transfer speeds of up to 5Gbps.Convenient top-loading design with independent drive doors.Plug-and-play functionality.Easy to set up with no driver or software installation required.Use this SATA hard drive docking station to gain quick access to two of your 2.5" or 3.5" SATA III SSDs/HDDs