Heat-Resistant Adhesive Paste

Loctite RTV, Silicone Adhesive Sealants withstands extreme temperature cycling, ozone, and UV light. It features a one-part silicone adhesive sealant that forms a tough rubber seal..Material: Silicone.Color: Clear.Application/Usage: Makes Reliable Formed-in-Place Gaskets that Resist Shrinking, Cracking, and Migrating.Features: Formulated to Withstand Extreme Temperature Cycling, UV Light, & Ozone.Loctite RTV, Silicone Adhesive Sealants - Withstands extreme temperature cycling and UV light

Kapton Tape measuring 1/4" x 36 yds. x 1 mil is made of polymide film with silicone adhesive and maintains high temperature resistance. Tape with excellent abrasion resistance has high dielectric strength and is sold as 1 per pack..Width: 1/4 in.Length: 36 yds.Thickness: 1 mil film, 2.5 mil total.Temperature: -269 - 260 deg C (-452 - 500 deg F).Material: Polymide film, silicone adhesive.Maintains high temperature resistance.Good electrical insulator.Excellent abrasion resistance and high dialectic strength.Silicon adhesive protection leaves no residue.DuPont Kapton polyimide films have high performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties that withstand extreme temperature, vibration and other demanding environments.Polyimide films make innovative design solutions possible in a range of industries including, consumer electronics, solar photovoltaic and wind energy, aerospace, automotive and industrial applications.Applications: Automotive sensor and manifolds, insulating circuit boards, etching, fiber optics cable, high temperature powder coating, semiconductor manufacturing, wave soldering during circuit board assembly.Standards and compliance: RoHS.1 mil, 1/4" x 36 yds. kapton tapes are used in applications at temperatures as low as 269 deg C ( 452 deg F) and as high as 260 deg C (500 deg F).

Kapton Tape measuring 1/8" x 36 yds. x 1 mil is made of polymide film with silicone adhesive and maintains high temperature resistance. Tape with excellent abrasion resistance has high dielectric strength and is sold as 1 per pack..Width: 1/8 in.Length: 36 yds.Thickness: 1 mil film, 2.5 mil total.Temperature: -269 - 260 deg C (-452 - 500 deg F).Material: Polymide film, silicone adhesive.Maintains high temperature resistance.Good electrical insulator.Excellent abrasion resistance and high dialectic strength.Silicon adhesive protection leaves no residue.DuPont Kapton polyimide films have high performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties that withstand extreme temperature, vibration and other demanding environments.Polyimide films make innovative design solutions possible in a range of industries including, consumer electronics, solar photovoltaic and wind energy, aerospace, automotive and industrial applications.Applications: Automotive sensor and manifolds, insulating circuit boards, etching, fiber optics cable, high temperature powder coating, semiconductor manufacturing, wave soldering during circuit board assembly.Standards and compliance: RoHS.1 mil, 1/8" x 36 yds. kapton tapes are used in applications at temperatures as low as 269 deg C ( 452 deg F) and as high as 260 deg C (500 deg F).

Kapton Tape measuring 3/4" x 36 yds. x 2 mil is made of polymide film with silicone adhesive and maintains high temperature resistance. Tape with excellent abrasion resistance has high dielectric strength and is sold as 1 per pack..Width: 3/4 in.Length: 36 yds.Thickness: 2 mil film, 3.5 mil total.Temperature: -269 - 260 deg C (-452 - 500 deg F).Material: Polymide film, silicone adhesive.Maintains high temperature resistance.Good electrical insulator.Excellent abrasion resistance and high dialectic strength.Silicon adhesive protection leaves no residue.DuPont Kapton polyimide films have high performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties that withstand extreme temperature, vibration and other demanding environments.Polyimide films make innovative design solutions possible in a range of industries including, consumer electronics, solar photovoltaic and wind energy, aerospace, automotive and industrial applications.Applications: Automotive sensor and manifolds, etching, fiber optics cable, high temperature powder coating, semiconductor manufacturing, wave soldering during circuit board assembly.Standards and compliance: RoHS.2 mil, 3/4" x 36 yds. kapton tapes are used in applications at temperatures as low as 269 deg C ( 452 deg F) and as high as 260 deg C (500 deg F).

Kapton Tape measuring 1/2" x 36 yds. x 1 mil is made of polymide film with silicone adhesive and maintains high temperature resistance. Tape with excellent abrasion resistance has high dielectric strength and is sold as 1 per pack..Width: 1/2 in.Length: 36 yds.Thickness: 1 mil film, 2.5 mil total.Temperature: -269 - 260 deg C (-452 - 500 deg F).Material: Polymide film, silicone adhesive.Maintains high temperature resistance.Good electrical insulator.Excellent abrasion resistance and high dialectic strength.Silicon adhesive protection leaves no residue.DuPont Kapton polyimide films have high performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties that withstand extreme temperature, vibration and other demanding environments.Polyimide films make innovative design solutions possible in a range of industries including, consumer electronics, solar photovoltaic and wind energy, aerospace, automotive and industrial applications.Applications: Automotive sensor and manifolds, insulating circuit boards, etching, fiber optics cable, high temperature powder coating, semiconductor manufacturing, wave soldering during circuit board assembly.Standards and compliance: RoHS.1 mil, 1/2" x 36 yds. kapton tapes are used in applications at temperatures as low as 269 deg C ( 452 deg F) and as high as 260 deg C (500 deg F).

Seal leaks, fix cracks and holes with the J-B Weld Epoxy Putty. You can use this water weld epoxy putty for plumbing or repairing tubs, shower, drains, fuel tanks, marine, boats, and potable water tanks. It can withstand temperatures of up to 300 deg. F, and prevent the surface from extreme heat and moisture. With a cure time of an hour, it sets hard to form a surface which can be drilled, tapped, filed, sanded, and painted..Off-white putty is ideal for welding and plumbing tasks.2 oz. stick for convenient application.Can be used on automotive, ceramic, epoxy putty sticks, fiberglass, metal, and PVC plastic.WATERWELD will plug or seal practically anything that leaks.It will patch holes and cracks, and mend almost anything that is broken.Cures under water, safe for use on lines carrying potable water.We should really call this amazing product "The Miracle Welder," because you can use it to plug holes and make permanent repairs under water and in gas tanks while they're still leaking.No exaggeration this is the best epoxy putty you can use.Modulus of elasticity: 6 X 105 psi.Composition: diglycidyl ether of bisphenol a, novolac epoxy resin, 2,4,6-tris(dimethylamino)methyl phenol.Temperature range: 300 deg F.Material: Epoxy putty.Appearance: White.Used Virtually any combination of iron, steel, copper, aluminum, brass, bronze, pewter, porcelain, ceramic, marble, glass, PVC & ABS, concrete, fiberglass, wood, fabric, paper- just about any porous and non-porous material.Tensile strength: 6000 psi and compression strength: 12,000 psi.Density: 15.8 lb./gal.The J-B Weld White Epoxy Putty Underwater Petro Chemical Acid Resistant Water Weld, 2 oz. Stick features a specially formulated epoxy composition with a tensile strength of 900 psi, making it ideal for use in underwater setups.

Economical graphic attachment and general industrial joining. Good moisture, solvent and UV resistance. Easy to apply and die-cut. No mess application. High temperature resistant. Polycoated kraft liner with an acrylic adhesive..Easy to apply and die-cut..12" x 60 yds..2.3 Mil Clear polycoated kraft liner.Acrylic Adhesive.Features a 3" diameter core size.1 rolls per case.Good moisture, solvent and UV resistance..No mess application..High temperature resistant..Certification & Standards: ASTM.Economical graphic attachment and general industrial joining.

LOCTITE Fast Cure Epoxy is a chemical resistant adhesive that helps build up worn parts. It comes with a tensile strength of 2000 psi..Type: Epoxy.Color: Gray.Capacity: 0.12 Oz.Fix Cure Time: 5 min @ 77 degreeF.Temperature Range: 180.0 degreeF.Full Cure Time: 10 min @ 77 degreeF.LOCTITE Fast Cure Epoxy - Chemical resistant adhesive that helps build up worn parts

Double Sided Polyimide Tapes are made of 1 mil polyimide film with 1.5 mil of silicone adhesive coating on each side. They are available in widths of up to 20 inches. They packaged with a single PET Liner in 36 yards long roll with a 3 inch core. These tapes offer an excellent performance in electrical and thermal insulation and have high dielectric strength. These Double Sided Polyimide Tapes are used for splicing of insulating layers, temporarily masking circuit boards and coils. These tapes offer outstanding thermal endurance with excellent puncture and tear resistance..Applications: Aerospace assembly, Masking circuit boards and coils, wafer dicing die cutting, Optic cables and solar panels..1 inch wide x 36 yards long x 4 mil. thick.Made of 1 mil polyimide film with 1.5 mil of silicone adhesive coating on each side (4 mil total thickness).RoHS Compliant.Temperature Rating: 500 degrees fahrenheit.Designed to be used for temporary masking purposes

LOCTITE Instant Adhesive & General Purpose Gel.Type: Instant Adhesive.Color: Clear.Capacity: 3 gm.Application/Usage: Multi-Purpose.Quantity: Each.Fix Cure Time: 75 s @ 77 degreeF.Temperature Range: -65.0 degreeF - 180.0 degreeF.Full Cure Time: 24 H @ 77 degreeF.Loctite Instant Adhesive & General Purpose Gel - A multi-purpose instant adhesive glue that is applicable with plastic, most metals, rubber, and wood

Double Sided Polyimide Tapes are made of 1 mil polyimide film with 1.5 mil of silicone adhesive coating on each side. They are available in widths of up to 20 inches. They packaged with a single PET Liner in 36 yards long roll with a 3 inch core. These tapes offer an excellent performance in electrical and thermal insulation and have high dielectric strength. These Double Sided Polyimide Tapes are used for splicing of insulating layers, temporarily masking circuit boards and coils. These tapes offer outstanding thermal endurance with excellent puncture and tear resistance..Applications: Aerospace assembly, Masking circuit boards and coils, wafer dicing die cutting, Optic cables and solar panels..3 inch wide x 36 yards long x 4 mil. thick.Made of 1 mil polyimide film with 1.5 mil of silicone adhesive coating on each side (4 mil total thickness).RoHS Compliant.Temperature Rating: 500 degrees fahrenheit.Designed to be used for temporary masking purposes

Dap Weldwood contact cement is a polychloroprene rubber-based contact adhesive that forms permanent bonds on a variety of surfaces. This professional-quality adhesive offers instant adhesion to eliminate the need for clamps or temporary fasteners. Used extensively to bond high-pressure laminates for countertops, tabletops, and cabinets. It forms a durable, super-strong bond when parts are assembled and momentary pressure is applied. Meets performance requirements of Federal Specification A-A-1936A (superseding Federal Specification MMM-A-130B). Meets all CPSC requirements..Premium, professional-quality adhesive.Size: 32 fl. oz..Comes in tan color.Meets or exceeds CPSC standards.Dries in 15-20 minutes.Cured bond resists the effects of heat (up to 180 degrees Fahrenheit), water, weather, grease, oil, and household chemicals.Suitable for both interior and exterior use.Spreads on easily and requires only one coat on most porous and nonporous surfaces.Dries tack-free, quickly and offers a long open time of up to 2 hours.When pressed together, surfaces bond instantly on contact with high green strength, allowing for immediate use of assembly.Perfect for bonding: high-pressure laminates, wood and plastic veneers, paneling, leather, fabrics, rubber, paper, cardboard, as well as bonding other materials to wood, particleboard, plywood, metal, concrete, and similar surfaces.⚠ WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov.WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.govSafety Data Sheet