High-Performance Network Cards

The Ethernet PCI-Express Network Interface Card from Dell is ideal for connecting your server to your network. The Dual Port Server Adapter proven to be reliable and standards-based solutions. This product has been tested and validated on Dell systems. It is supported by Dell Technical Support when used with a Dell system..Dual-port Ethernet network adapter with an OCP 3.0 interface that supports 10/25 Gigabit Ethernet connectivity.Supports a maximum data transfer rate of up to 25,000 Mbps.Features two high-speed Ethernet ports.Compatible with Dell PowerEdge servers that support the OCP 3.0 interface, including models like R650, R750, R760, C6520, C6620, T550, T560, XE8640, XE9680, XR5610, and XR7620

Intel I350-T2 chipset supports reliable and advanced network connectivity Compliant with IEEE 802.3, 802.3u, 802.3ab with full duplex and Wake-on-LAN support..Type of Product/Use: Gigabit Ethernet Card for Server.Adapter Speed: Gigabit Ethernet.Number of ports and Type:2 RJ-45.Dimensions as H x W x D in inches: 0.79" x 5.43" x 4.72".Installation Info: Plug-in Card.Warranty: 1 Year.Features innovative power management including Energy Efficient Ethernet (EEE) and DMA Coalescing to increase efficiency and reduce power consumption.Fits both standard and low profile system chassis with the included spare low profile bracket.⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.Quickly adds two independent Gigabit Ethernet ports through an available PCI Express slot to server or desktop systems

The Solarflare® Flareon Ultra SFN8542-Plus 40 Gigabit 2-port server adapter delivers faster, more efficient processing of network traffic to accelerate a wide range of applications. This adapter accelerate, monitor and secure you network by providing ultra low latency, high packet rate, internal switch for single core/4 port operation and 16 lanes PCIe 3.1 for full 2 x 40 Gbps bidirectional performance..Server adapter delivers faster, more efficient processing of network traffic.Host interface: PCI Express 3.1 x16, total number of ports: 2, expansion slot: QSFP+.Dimensions: 6.6"L x 2.7"W.Power: 10 W (typ).Green, RoHS compliant.Form factor: Plug-in module.Card height: Low profile, end bracket height: PCI Express standard 4.725", PCI Express low profile: 3.12".Management: SNMP, ACPI v3.0.Media type supported: Optical fiber.Network technology: 40GBase-X.Compatible with server.IEEE802.3-2012 Ethernet base standard, including 802.3bx, 802.3bd, 802.3x, 802.3ba (40G/s), 802.3ae (10 Gigabit Ethernet over fiber).Operating range: 0 - 50 deg C

This Wi-Fi 6E network card enhances desktop capabilities, enabling high-speed low-latency wireless communication with reduced interference and less congestion in the 6GHz band, with speeds of up to 2400Mbps..Wi-Fi 6E PCIe Network Card with Bluetooth 5.3 enabling high-speed low-latency wireless communication with reduced interference and less congestion in the 6GHz band (up to 2400Mbps).Tri-Band 802.11ax PCIe 3.0 Wi-Fi card is backwards compatible with 802.11a/b/g/n/ac standards on 5Ghz (2402Mbps) and 2.4Ghz (574Mbps) bands.OS compatibility: Windows 10, 11, Linux 5.11 and up (LTS versions only).OFDMA and MU-MIMO features improve network performance, reducing latency and enhancing data transfer efficiency.Meets or exceeds the FCC, and WEEE standards.The antenna base is magnetized and equipped with a 3.6' attached cable, allowing for flexible antenna placement, optimizing signal reception and minimizing interference.Base of the antenna is covered in rubber to enhance grip when placed on level non-metallic surfaces.This card features Bluetooth 5.3, enabling fast data transfers at 2Mbps, and offering an extended range, improved connection stability, and lower power consumption; to enable Bluetooth functionality, connect the four-pin IDC to nine-pin USB header (Bluetooth cable included) to an available nine-pin USB header, located on the motherboard of the host computer.WPA3 offers secure encryption for Wi-Fi password safety.The all-metal aluminum heatsink dissipates excessive heat to maintain optimal performance.Includes PCIe Wi-Fi card, magnetic antenna stand, Bluetooth cable, low-profile bracket with two screws, and quick-start guide.2-year manufacturer limited warranty

This Wi-Fi 6E network card enhances desktop capabilities, enabling high-speed low-latency wireless communication with reduced interference and less congestion in the 6GHz band, with speeds of up to 2400Mbps..Wi-Fi 6E PCIe Network Card with Bluetooth 5.3 enabling high-speed low-latency wireless communication with reduced interference and less congestion in the 6GHz band (up to 2400Mbps).Tri-Band 802.11ax PCIe 3.0 Wi-Fi card is backwards compatible with 802.11a/b/g/n/ac standards on 5Ghz (2402Mbps) and 2.4Ghz (574Mbps) bands.OS compatibility: Windows 10, 11, Linux 5.11 and up (LTS versions only).OFDMA and MU-MIMO features improve network performance, reducing latency and enhancing data transfer efficiency.Meets or exceeds the FCC, and WEEE standards.The antenna base is magnetized and equipped with a 3.6' attached cable, allowing for flexible antenna placement, optimizing signal reception and minimizing interference.Base of the antenna is covered in rubber to enhance grip when placed on level non-metallic surfaces.This card features Bluetooth 5.3, enabling fast data transfers at 2Mbps, and offering an extended range, improved connection stability, and lower power consumption; to enable Bluetooth functionality, connect the four-pin IDC to nine-pin USB header (Bluetooth cable included) to an available nine-pin USB header, located on the motherboard of the host computer.WPA3 offers secure encryption for Wi-Fi password safety.The all-metal aluminum heatsink dissipates excessive heat to maintain optimal performance.Includes PCIe Wi-Fi card, magnetic antenna stand, Bluetooth cable, low-profile bracket with two screws, and quick-start guide.2-year manufacturer limited warranty

The ATTO CTFC-161P-000 Celerity FC-161P host bus adapter provides an advanced storage connectivity solution with high performance, intelligence and scalability. It allows data transfer speeds up to 16 Gbps. It has 2 x fiber channel ports, PCI Express 3.0 x 8 (PCIe 3.0) and 1 x SFP I/O expansion slot for connectivity. It is compatible with Windows, Linux, MacOS, VMware, illumos and FreeBSD driver support..Host bus adapter.Dimensions: 2.7"H x 6.6"W.Compatible with Windows, Linux, MacOS, VMware, illumos and FreeBSD driver support.Interface: (2) fiber channel ports, x8 PCI Express 3.0 (PCIe 3.0), I/O expansions: 1 x SFP.Data transfer rate: 16 Gbps.Supports NPIV and Virtual Fabric.Adapter is backward compatible with 8 Gbps and 4 Gbps fiber channel products.Provide an advanced storage connectivity solution with high performance, intelligence and scalability.Form factor: Low-profile plug-in card.Temperature: 0 to 55 deg C (operating), -40 to 70 deg C (storage).Includes high and low-profile form factor bracket.RoHS compliant.Comes with 3 year warranty

Do you want to increase bandwidth and reduce network vulnerability while reducing costs? The HPE Ethernet 10/25Gb 2-port 631 Adapters deliver the capability to drive either 10G (SFP+) or 25G (SFP28) speeds, providing the option for a large jump in Ethernet performance. Compared to a 10G implementation these adapters offer cost reductions by lowering the number of servers, adapters, cables and switches while accelerating server performance and targeted workloads. These adapters help prevent, detect and recover from cyberattacks by protecting applications, data and server infrastructure by authenticating digitally signed firmware via a Root of Trust architecture. In addition, they offer Secure Boot, Device-level Firewall and other advanced security features. Features: Safeguard Your Data and Your Business Network: The HPE Ethernet 10/25Gb 2-port 631 Adapter blocks installation of rogue or corrupted firmware and verifies that the executing firmware is trusted via Hardware Root of Trust and Authentication. Stops unmanaged access to memory or storage with Device - level Firewall. This validates that on-device firmware and configuration data can only be accessed by authorized agents. Provides traceability into authenticated firmware updates by capturing changes in standard system logs. Boosting I/O Bandwidth with Lower Latency: The HPE Ethernet 10/25Gb 2-port 631 Adapter delivers single root I/O virtualization (SR-IOV) with the ability to run a large number of virtual machines (VMs) per server, which reduces the need for hardware and the resultant costs of space and power required by hardware devices. Reduces CPU Utilization and helps improve host VM density and server efficiency using remote direct memory access (RDMA) over Converged Ethernet (RoCE v2) for Live Migration, Microsoft SMB Direct environments. Realize Breakthrough Economics: The HPE Ethernet 10/25Gb 2-port 631 Adapter offloads packet processing to reduce CPU utilization and lower power with Tunnel Offloads (VXLAN and NVGRE). Speeds packet processing to service more I/O requests utilizing data plane development packet (DPDK)..This 25Gigabit Ethernet card will surely cater to the bandwidth requirements of the next-gen cloud and Web-scale environments.This 8000 MB/s bandwidth PCI Express 3.0 x8 adapter ensures easy connectivity and plug-in form-factor for affordable and reliable Ethernet network.This dual port 25gigabit ethernet card lets you add two network ports using a single expansion slot to a client, server or workstation.With the 20GBase-X technology get up to 20Gbps data transfer rate over the supported network cable