High-Temperature Masking Tapes

Bertech High Temperature Masking Disks are made of 1 mil thick polyimide film with 1.5 mil thick silicone adhesive. These masking disks are reliable and durable with a unique combination of electrical, thermal, chemical, and mechanical properties that withstand extreme temperatures, vibration, and other demanding environments. Masking disks are primarily used in circuit board production, wave soldering, and other applications.0.75"Dia. high-temperature masking disks.Total thickness: 2.5 mil.Masking disks are primarily used in circuit board production, wave soldering, and other applications.Comes in amber color.Made of 1 mil polyimide film with 1.5 mil silicone adhesive which does not leave any residue.Packaged on a 3" core and contains 1000 disks per roll.Tensile strength is 7.72 lbs. per inch.Meets or exceeds RoHS standard.Masking disks are reliable and durable with a unique combination of electrical, thermal, chemical, and mechanical properties that withstand extreme temperatures, vibration, and other demanding environments.These disks can withstand temperatures of up to 500 degrees Fahrenheit

Bertech Kapton tapes are made from Kapton HN film with silicone adhesive. They have been used in applications at temperatures as low as -269 degrees C (-452 degrees F) and as high as 260 degrees C (500 degrees F). 2 mil film thickness with 1.5 mil silicone adhesive. DuPont Kapton polyimide films have set the industry standard for over 45 years in high performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties that withstand extreme temperatures, vibration, and other demanding environments. Kapton tapes have high dielectric strength. The silicon adhesive protection leaves no residue..1" x 36 yds. long heat resistant tape.Film thickness: 0.05mm, adhesive thickness: 0.04mm, total thickness: 0.09mm.These tapes are designed for masking of electronic and other components during the assembly and manufacturing process.Comes in amber color.Silicone adhesive, which does not leave any residue.Tensile strength is 50 lbs./inch.Meets or exceeds RoHS standard.They are reliable and durable, with a unique combination of electrical, thermal, chemical, and mechanical properties that withstand extreme temperatures, vibration, and other volatile environments.Polyimide films make innovative design solutions possible in a range of industries, including consumer electronics, solar photovoltaic, wind energy, aerospace, automotive, and industrial applications.They have been used in applications at temperatures as low as -269 degrees C (-452 degrees F) and as high as 260 degrees C (500 degrees F)

Bertech Kapton tapes are made from Kapton HN film with silicone adhesive. They have been used in applications at temperatures as low as -269 degrees C (-452 degrees F) and as high as 260 degrees C (500 degrees F). 2 mil film thickness with 1.5 mil silicone adhesive. DuPont Kapton polyimide films have set the industry standard for over 45 years in high performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties that withstand extreme temperatures, vibration, and other demanding environments. Kapton tapes have a high dielectric strength. The silicon adhesive protection leaves no residue..3" x 36 yds. long heat resistant tape.Film thickness: 0.05mm, adhesive thickness: 0.04mm, total thickness: 0.09mm.These tapes are designed for masking of electronic and other components during the assembly and manufacturing process.Comes in amber color.Silicone adhesive, which does not leave any residue.Tensile strength is 50 lbs./inch.Meets or exceeds RoHS standard.They are reliable and durable, with a unique combination of electrical, thermal, chemical, and mechanical properties that withstand extreme temperatures, vibration, and other volatile environments.Polyimide films make innovative design solutions possible in a range of industries, including consumer electronics, solar photovoltaic, wind energy, aerospace, automotive, and industrial applications.They have been used in applications at temperatures as low as -269 degrees C (-452 degrees F) and as high as 260 degrees C (500 degrees F)

Bertech Kapton tapes are made from Kapton HN film with silicone adhesive. They have been used in applications at temperatures as low as -269 degrees C (-452 degrees F) and as high as 260 degrees C (500 degrees F). 2 mil film thickness with 1.5 mil silicone adhesive. DuPont Kapton polyimide films have set the industry standard for over 45 years in high performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties that withstand extreme temperatures, vibration, and other demanding environments. Kapton tapes have a high dielectric strength. The silicon adhesive protection leaves no residue..2" x 36 yds. long heat resistant tape.Film thickness: 0.05mm, adhesive thickness: 0.04mm, total thickness: 0.09mm.These tapes are designed for masking of electronic and other components during the assembly and manufacturing process.Comes in amber color.Silicone adhesive, which does not leave any residue.Tensile strength is 50 lbs./inch.Meets or exceeds RoHS standard.They are reliable and durable, with a unique combination of electrical, thermal, chemical, and mechanical properties that withstand extreme temperatures, vibration, and other volatile environments.Polyimide films make innovative design solutions possible in a range of industries, including consumer electronics, solar photovoltaic, wind energy, aerospace, automotive, and industrial applications.They have been used in applications at temperatures as low as -269 degrees C (-452 degrees F) and as high as 260 degrees C (500 degrees F)

3M™ Scotch® 231 Masking tape in tan color measures 1" x 60 yds and is used to color-code shipments or for inventory identification. Tape offers good initial adhesion to a variety of surfaces and is ideal for indoor applications, sold as 12 per case..28 lbs. of tensile strength per inch of width.7.6 mil thickness.Good holding power to help resist lifting or curling.Backing material: Crepe paper.Roll size: 1"(W) x 60 yds.(L).Color: Tan.Diameter: 5.6.Elongation: 10%.Adhesive material: Rubber, Adhesion to steel: 38 oz. per inch of width.Temperature range up to 300 deg F for 30 minutes.1" x 60 yds. masking tape is a premium high performance crepe paper masking tape designed to perform well in most industrial painting situations.

These tapes are reliable and durable with a unique combination of electrical, thermal, chemical and mechanical properties that withstand extreme temperature, vibration and other demanding environment..Each roll contains 1"W x 36 yds. L tape, giving you plenty of tape for practical purposes.Thickness: 2.5 mil.Masking tape lets you tape areas you need without having to worry about excessive stickiness.Use this black masking tape in a variety of ways at your business or office.Made of 1 mil thick polyimide film with 1.5 mil thick silicone adhesive.Tensile strength: 30 lbs. per inch.Meets or exceeds RoHS standard

Kapton® Tapes are made from 1 Mil thick Dupont's Kapton® HN film with silicone adhesive that leaves no residue. These Kapton Tapes are designed for temporary masking of electronic and other components during assembly and manufacturing process. They are extremely versatile and their thermal performance provides unlimited potential from electronic circuits in the camera to the space missions to the next generation of photovoltaic and solar cells. They have been used in applications at temperatures as low as -269°C (-452°F) and as high as 260°C (500°F). They are available in widths of up to 19 inches. They are packaged in 36 yard-long rolls on a 3 inch core. DuPont™ and Kapton® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company..Applications: 3D printing, Aerospace assembly, Auto industry, Electronic assembly, Solar panels, Solder wave process.Amber, Dupont HN series.Silicon adhesive which enables masking of uneven surfaces and removes cleanly without adhesive residue.Temperature Range: -452 to 500 degrees F.RoHS Compliant

Kapton® Tapes are made from 1 Mil thick Dupont's Kapton® HN film with silicone adhesive that leaves no residue. These Kapton Tapes are designed for temporary masking of electronic and other components during assembly and manufacturing process. They are extremely versatile and their thermal performance provides unlimited potential from electronic circuits in the camera to the space missions to the next generation of photovoltaic and solar cells. They have been used in applications at temperatures as low as -269°C (-452°F) and as high as 260°C (500°F). They are available in widths of up to 19 inches. They are packaged in 36 yard-long rolls on a 3 inch core. DuPont™ and Kapton® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company..Applications: 3D printing, Aerospace assembly, Auto industry, Electronic assembly, Solar panels, Solder wave process.Amber, Dupont HN series.Silicon adhesive which enables masking of uneven surfaces and removes cleanly without adhesive residue.Temperature Range: -452 to 500 degrees F.RoHS Compliant

Kapton® Tapes are made from 1 Mil thick Dupont's Kapton® HN film with silicone adhesive that leaves no residue. These Kapton Tapes are designed for temporary masking of electronic and other components during assembly and manufacturing process. They are extremely versatile and their thermal performance provides unlimited potential from electronic circuits in the camera to the space missions to the next generation of photovoltaic and solar cells. They have been used in applications at temperatures as low as -269°C (-452°F) and as high as 260°C (500°F). They are available in widths of up to 19 inches. They are packaged in 36 yard-long rolls on a 3 inch core. DuPont™ and Kapton® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company..Applications: 3D printing, Aerospace assembly, Auto industry, Electronic assembly, Solar panels, Solder wave process.Amber, Dupont HN series.Silicon adhesive which enables masking of uneven surfaces and removes cleanly without adhesive residue.Temperature Range: -452 to 500 degrees F.RoHS Compliant

Kapton® Tapes are made from 1 Mil thick Dupont's Kapton® HN film with silicone adhesive that leaves no residue. These Kapton Tapes are designed for temporary masking of electronic and other components during assembly and manufacturing process. They are extremely versatile and their thermal performance provides unlimited potential from electronic circuits in the camera to the space missions to the next generation of photovoltaic and solar cells. They have been used in applications at temperatures as low as -269°C (-452°F) and as high as 260°C (500°F). They are available in widths of up to 19 inches. They are packaged in 36 yard-long rolls on a 3 inch core. DuPont™ and Kapton® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company..Applications: 3D printing, Aerospace assembly, Auto industry, Electronic assembly, Solar panels, Solder wave process.Amber, Dupont HN series.Silicon adhesive which enables masking of uneven surfaces and removes cleanly without adhesive residue.Temperature Range: -452 to 500 degrees F.RoHS Compliant

Bertech high-temperature masking disks are made of 1 mil thick polyimide film with 1.5 mil thick silicone adhesive. These masking disks are reliable and durable with a unique combination of electrical, thermal, chemical, and mechanical properties that withstand extreme temperatures, vibration, and other demanding environments. Masking disks are primarily used in circuit board production, wave soldering, and other applications. Masking disks are primarily used in circuit board production, wave soldering, and other applications..0.25"Dia high-temperature masking disks.Total thickness: 2.5 mil.Masking disks are primarily used in circuit board production, wave soldering, and other applications.Comes in amber color.Made of 1 mil polyimide film with 1.5 mil silicone adhesive which does not leave any residue.They are packaged on a 3" core; 2000 disks per roll.Tensile strength is 3.5kg/inch (7.72 lbs./inch).Meets or exceeds RoHS standard.Masking disks are reliable and durable with a unique combination of electrical, thermal, chemical, and mechanical properties that withstand extreme temperatures, vibration, and other demanding environments.These disks can withstand temperatures of up to 500 degrees Fahrenheit

Bertech high-temperature masking disks are made of 1 mil thick polyimide film with 1.5 mil thick silicone adhesive. These masking disks are reliable and durable with a unique combination of electrical, thermal, chemical, and mechanical properties that withstand extreme temperatures, vibration, and other demanding environments. Masking disks are primarily used in circuit board production, wave soldering, and other applications..2"Dia high temperature masking disks.Total thickness is 2.5 mil.Masking disks are primarily used in circuit board production, wave soldering, and other applications.Comes in amber color.Made of 1 mil thick polyimide film with 1.5 mil thick silicone adhesive, which does not leave any residue.They are packaged on a 3" core, contains 250 disks per roll.Tensile strength is 3.5kg/inch (7.72 lbs./inch).Meets or exceeds RoHS standard.Masking disks are reliable and durable with a unique combination of electrical, thermal, chemical, and mechanical properties that withstand extreme temperatures, vibration, and other demanding environments.These disks can withstand temperatures of up to 500 degrees F/260 degrees C