Impact Punchdown Tools
8 results
Professional, installer grade 110/66 impact punch down tool..Professional, installer grade 110/66 impact punch down tool.Both blades (110 and 66) have cutting and non-cutting sides.Handle compartment for storing blade not in use.Adjustable impact preference.Rugged, polyacetal resin frame for long-life use
The Fluke Networks® Jack Rapid™ JR-PAN-2 punchdown tool in yellow, reduces time and increases accuracy by seating and terminating all wires at once with a simple squeeze of the handle. The patented jack has built-in blade that cuts off the excess wire after it seats in the connector, eliminating the need for a secondary trim step. It offers simple, one-handed operation, with an ergonomically designed handle that reduces hand fatigue..Punchdown tool reduces time and increases accuracy by seating and terminating all wires.Dimensions: 5 1/2"H x 5 1/2"W x 1 3/4"D.Comes in yellow color.Patented jack termination tool that saves time and increases accuracy by seating and terminating all wires at once with a simple squeeze of the handle.Allows to terminate jacks eight times faster than traditional impact tools.Seats and terminates all wires simultaneously.Built in blade cuts off the excess wire after it is seated in the connector, eliminating the need for a secondary trim step.One handed operation with an ergonomically designed handle which reduces hand fatigue.Does not punch into the palm of your hand or through drywall again
Make effortless, uniform connections with Fluke Network''s D814, all-in-one, telecom punchdown tool. Its adjustable impact wheel has high and low settings for any type of termination..66 blades.Lightweight and easy to use.Allows low impact for 24 and 26 gauge wire or high impact for 22 gauge wire.Automatic spring mechanism provides right impact to seat and/or terminate wires.Compartment at the end of the tool stores an extra blade.Includes: D814 10055200 impact tool, eversharp 110 blade.Application/usage: Punching, cable termination.Warranty: Lifetime.Fluke Networks Impact Tool - Seats and Terminates Wires
The most essential tools for electrical and telecom technicians in our sleek form-fitting PVC dur-a-grip tool pouch - holds your tools securely inside, even upside down..All the tools you need (in one pouch) to cut, strip, clean and make connections.Application/usage: Six tool kits combinations available for a multitude of applications.Easy to use cable stripper quickly rings and slits many types of cable.Use the probe pic to check for loose or damaged connections.D914 and D814 industry standard punchdown tools make for solid terminations.All kits include ergonomically designed Dur a Grip pouch for convenient tool storage on belt.Cut and strip wire cleaner and faster with the electricians D snips.Includes: D814 impact tool, electricians D Snips, cable stripper, Eversharp 66/110 cut blade, probe pic, carrying case.Fluke Networks Pro-Tool Kit - Six Tools in One Place
The most essential tools for electrical and telecom technicians in our sleek form-fitting PVC dur-a-grip tool pouch - holds your tools securely inside, even upside down..All the tools you need (in one pouch) to cut, strip, clean and make connections.Application/usage: Six tool kits combinations available for a multitude of applications.Easy to use cable stripper quickly rings and slits many types of cable.Use the probe pic to check for loose or damaged connections.D914 and D814 industry standard punchdown tools make for solid terminations.All kits include ergonomically designed Dur a Grip pouch for convenient tool storage on belt.Cut and strip wire cleaner and faster with the electricians D snips.Includes: IS50 with D914S impact tool, D snips, cable stripper, eversharp 66/110 cut blade.Fluke Networks Pro-Tool Kit - Tools and Storage in One
All kits include ergonomically designed Dur-a-Grip pouch for convenient tool storage on belt..Material: Rugged PVC pouch, aluminum stripper.All kits include ergonomically designed Dur-a-Grip pouch for convenient tool storage on belt.D914 and D814 industry standard punchdown tools make for solid terminations.Easy to use cable stripper quickly rings and slits many types of cable.Use the probe pic to check for loose or damaged connections.Cut and strip wire cleaner and faster with the electricians' D-Snips.Six tool kits combinations available for a multitude of applications.D914S impact tool provides fast, comfortable reliable connections to blocks and jacks.D-snips for faster cleaner safer no-slip cutting and stripping.Cable stripper strips outer Jacket of UTP/STP and other flexible cables without damaging wires.Package Contents: Pro-tool kit IS60, D914S impact tool, D-Snips, cable stripper, maglite,sharpie and eversharp 66/110 cut blade.Includes: Pro-Tool Kit IS60, D914S Impact tool, D-Snips, Cable Stripper, Maglite, Sharpie And Eversharp 66/110 Cut Blade
The Fluke Network 10061120 D914S impact tool has EverSharp 110 & EverSharp 66 blade for precise cutting. It features automatic spring handle that confirms low impact for 24/26 ga wire or high impact for 22-gauge wire. It has convenient blade storage that built for easy carry. With a rubber handle and special ergonomic design, this impact tool ensures better grip and minimized hand fatigue..Industry standard, internationally accepted.Hook and spudger tools are built into the handle.Automatic spring handle --choose low impact for 24/26 ga wire or high impact for 22-gauge wire.D914 and D914S impact tools accept Phillips-head or flat screwdriver blade.Convenient blade storage built into the handle.Adapter blade allows technician to use a variety of torque tool bits and sockets.Easy blade insertion, locks in place.D914STM soft touch impact tool features a rubber handle and special ergonomic design for better grip and to reduce hand fatigue.Copper type: punchdown/impact.Type : copper.Accepts all fluke networks industry standard blades. Punch down tool measures 1.4" x 5.9" x 1".Fluke networks D914s impact tool 110 eversharp 66 blade.Impact tool with EverSharp 110 and EverSharp 66 blade, accept Phillips-head or flat screwdriver blade.
Fluke Networks Contractor telecom kit features punch down tool for reliable terminations. Contractor telecom kit offers a cable stripper that quickly rings and slits many types of cable..D814 industry standard punch down tool for reliable terminations.Eversharp 66/110 cut blade provides flexibility for different block and jack terminations.Cable stripper quickly rings and slits many types of cable.Cut and strip wire cleaner and faster with the electricians D-snips.Connect to jacks for testing with the standard 4-wire modular adapter.Soft zippered pouch keeps your tools all in one convenient place.Includes a TS 30 test set with angled bed-of-nails cord, D814 impact tool, eversharp 66/110 cut blade, electrician's D-snips, cable stripper, standard 4-wire modular adapter and probe pic.Fluke Networks Contractor telecom kit is made for technicians who install, test and troubleshoot phones and has high impedance datasafe operation.
You May Also Like
The D914S impact tool provide quality terminations on the first punch, helping to achieve the highest quality possible on network installations. The only impact tool that combine torque and impact in one tool..D914S Impact Tool w/Eversharp 66/110 Cut Blade.Special ergonomic design for better grip and to reduce hand fatigue.Automatic spring handle: choose low impact for 24/26 gauge wire or high-impact for 22 gauge wire.Use the spudger to remove the cross-connect module from the mounting brack.Application/usage: Cable termination.Accept Phillips-head or flat screwdriver blade.Includes D914S 10061810 impact tool, EverSharp 110 blade, EverSharp 66 blade.Included accessories: D914S 10061810 impact tool, Eversharp 110 blade, eversharp 66 blade.Fluke Networks D914S Impact Tool - User-Friendly Network-Installation Tool
Make effortless, uniform connections with fluke network's D814, all-in-one, telecom punchdown tool, its adjustable impact wheel has high and low settings for any type of termination..Convenient blade storage built into the end of the handle.Accepts standard industry blades.Lightweight and easy to use.Adjustable spring impact mechanism allows low impact for 24 - and 26 gauge wire or high impact for 22 gauge wire.Easy blade insertion.Includes: D814 series automatic impact tool, EeverSharp 110 blade, Eversharp 66 blade, free blade 934.D814 series automatic impact tool has adjustable spring impact mechanism allows low impact for 24- and 26-gauge wire or high impact for 22-gauge wire.
The Fluke Networks® EverSharp™ 10176500 110 punch down tool blade stays sharper for longer time and provides better terminations at the block. It fits the D914S, D914, D814 and D214 punchdown tools..Punch down tool blade for use with D914, D914S, D814 and D214 punch down tools.Sharper blades offer better terminations at the block, leading to quality installs.Stays sharper longer than other competitive blades
Crimps 8-position RJ45 connectors and 4- and 6- position RJ11 and RJ12 connectors..Embedded flat cable cutter and stripper.Application: Stripping, cutting, crimping.Lifetime limited warranty
Material: Rubber handle.Industry standard, internationally accepted.Hook and spudger tools are built into the handle.Automatic spring handle - choose low impact for 24/26 gauge wire or high impact for 22-gauge wire.D914 and D914S impact tools accept phillips-head or flat screwdriver blade.Convenient blade storage built into the handle.Adapter blade allows technician to use a variety of torque tool bits and sockets.Easy blade insertion, locks in place.Application: Punching, Cable termination.Package Contents: D914 Impact tool, eversharp 110 blade, eversharp 66 blade, blade.Eversharp 110 blade, eversharp 66 blade.1 year limited warranty
The Fluke Networks® 11294000 Need-L-Lock crimping pliers combine UR UY UG connector crimper with needle-nose pliers so you can carry one less tool on your belt. Aligned crimping jaws come down square to ensure a solid connection and they are grooved to provide a better grip on wires and feature a built-in cutter and cable stripper. The 6 1/2" needle-nose crimping pliers are forged from high-quality steel with rubber-coated ergonomic handles for a reliable, non-slip grip..Combines a UR/UY/UG connector crimper with needle-nose pliers.Aligned crimping jaws come down square to ensure a solid connection.Jaws are grooved to provide a better grip on wires.Built-in cutter and wire stripper.Rubber coated handles for a non-slip grip.Needle-nose crimping pliers.UR/UY/UG connector crimper.Crimping pliers With jaws are grooved to provide a better grip on wires and feature a built-in cutter and cable stripper.
Round cable stripper for a variety of flexible round cable..Full line of cable strippers.Double-slotted stripper for 22/24 gauge wire insulation.Coax strippers with two or three levels.Combo stripper for multiple wire types and applications.Application: Stripping, cutting.Includes: Double slotted, plenum, round, coax and combo.18 months limited warranty
FTK2000 Network Accessory Kit.Networking Accessory.Part Number: FTK2000.Rigid hard shell is coated with scratch resistant finish for high quality durability
Fluke Networks® Compact Probe Pic with Cap, Yellow (44600000).Probe pic is perfect to check loose or damaged connections or to spread apart wires for direct access.Comes in yellow color and features high quality nylon construction for durability.Perfect for using the pic end for tracing or pulling wires from a bunch.Insulated tip protects against shorting adjacent components
Fluke Networks® MS2-KIT MicroScanner2 Professional kit includes MicroScanner2 cable verifier with main wiremap adapter, remote identifiers #2-7 and IntelliTone Pro 200 probe. Comprises of shielded twisted-pair RJ45 patch cord, RJ11 patch cord, clip-set RJ45 to 8 alligator clip bare wire adapter and F Coax push on patch cord for effective detection. Comes with accessory soft pouch for user convenience. Features two AA alkaline batteries and a 9 V alkaline battery for long working of the verifier. Kit has MicroScanner2 getting started guide, MicroScanner2 owners CD, IntelliTone Pro getting started guide and IntelliTone Pro owners CD for trouble-free usage of the device. All the components come in a deluxe Fluke Networks carry case for added convenience..MicroScanner2 professional kit is suitable to verify voice/data/video cable and services.Measures 6.4"H x 3"W x 1.4"D.Supports copper media for high speed transmission.F connector, RJ-11, RJ-45 interfaces/ports for flexible connectivity.FTP, SSTP, UTP cables for long distance transmission.Distance to fault, Length, PoE, speed test copper cables to 1000Base-T, Wiremap tests, tools and measurements.Requires operating temperature of 32 - 123 deg F, storage temperature of -4 - 140 deg F and 90 percentage relative humidity.Operates at altitude 4000 m (operating) and 12000 m (storage).Monochrome, backlight LCD display provides brighter images.Locates virtually any cable or wire pair with IntelliTone digital and analog toning.Rubber over mold enhances grip and increases ruggedness.Contains accessory soft pouch, 2 x AA alkaline batteries, 1 x 9 V alkaline battery, MicroScanner2 getting started guide, owners CD.Contains cable verifier with main wiremap adapter, remote identifiers, IntelliTone Pro 200 probe, shielded twisted-pair RJ45 patch cord.Meets N10140 C-Tick EMC standard, FCC Part 15 Class A, CE European Union Directives.Weighs 0.8 lbs.Comes with 1 year warranty.Fluke Networks® MicroScanner2 Professional kit tests voice/data/video cable/services with the help of a revolutionary user interface. Includes essential verification components.
JackRapid is a patented jack termination tool that saves time and increases accuracy by seating and terminating all wires at once with a simple squeeze of the handle..Fast answers: JackRapid allows you to terminate jacks eight times faster than traditional impact tools with accuracy that's unmatched.Patented jack termination tool seats and terminates all wires simultaneously.Built in blade cuts off the excess wire after it is seated in the connector, eliminating the need for a secondary trim step.Simple, one handed operation, with an ergonomically designed handle, reduces hand fatigue.Additional information: Leviton jack: Supports jack models: 41106, 41108 Cat3/5, 5G108 Cat5e.Simple, one handed operation reduces hand fatigue.Unique design easily acco mmodates close to wall installation.Application/usage: Cable termination, cutting.Compatibility: PC.Replaceable blade head for use with multiple jack types.Fluke Networks JR-LEV-1 JackRapid Termination Tool - Quick Seating and Cutting
The Fluke Networks network testing device will allow you to keep your network running smoothly. It will allow you to easily test twisted-pair cables and trace installed hidden cables. It uses an easy-to-read LED interface and a two-tone generator to let you know whether it detects any problems or defects..Display type: LED.Interfaces/Ports: 1 x RJ-45.Testing of twisted pair cables for open circuits, shorts, crossed pairs, reversed pairs and split pairs.Easy-to-read fault display.Tone generator for tracing installed cables hidden in walls, floors and ceilings.Remote unit enables one-person testing of installed cables.Micromapper's built-in tone generator works with the IntelliTone™ pro probe or any other analog probe, allowing you to trace cable through walls, floors and ceilings.Micromapper also includes a remote unit that allows one person to test installed cabling or patch cords.MicroMapper quickly and easily tests twisted pair cabling, giving you visibility of opens, shorts, crossed, reversed and split pairs.Just push the TEST button and MicroMapper will automatically scan all wire pairs for any existing faults in your cable.Generation of two tones for tracing cables and lication hidden cables.Includes: Micromapper and Micromapper remote, patch cable, 6 V alkaline battery and user guide.Weight: 0.28 lbs..Dimensions: 4.93"(H) x 2.05"(W) x 1.18"(D).1 year limited warranty.Fluke Networks Network Testing Device - Powerful and Reliable
These versatile electrician’s snips and scissor feature a file and scraper on both blades for easy wire cleaning. Electrician’s snips also feature a handy notched scissor blade for quickly stripping 19- and 23-gauge wire. Made to last with high-quality forged steel, these electrician snips with scissors are a must have for your tool bag..High-quality forged steel construction for strength and durability.File and scraper on both blades for cleaning wire.Notched blade for stripping 19 and 23-gauge wire.Cuts up to 16-gauge solid and 12-gauge stranded wire.Serrated blade for non-slip wire cutting.Fluke Networks Electrician’s Snips are made from high-quality forged steel for strength and durability.
The Fluke LinkIQ cable+network tester is the solution to verify cable performance up to 10G and solve network connectivity problems. LinkIQ validates cable performance using frequency-based measurements to calculate maximum bandwidth (10BASE-T to 10GBASE-T), which ensure that tested links meet performance requirements. LinkIQ also performs ping tests to verify connectivity and provides nearest switch diagnostics including advertised data rate, switch name, IP address, port number and VLAN information, plus PoE testing and load test up to Class 8 (90 W). Ethernet Alliance PoE Certified for reliable multivendor interoperability. Additional features include: Cable Toning, Port Blink, Remote Office Locators, and the ability to manage results via LinkWare PC. Includes LinkIQ main unit, remote ID #1-7, RJ45-RJ45 patch cord, AC charger, RJ45/11 universal coupler, IntelliTone(TM) Pro 200 Probe, and duffel bag carrying case..This cable and network tester is the solution to verify cable performance up to 10G and solve network connectivity problems.Includes Remote ID #1-7, RJ45-RJ45 patch cord, AC charger, RJ45/11 universal coupler, IntelliTone Pro 200 Probe, and duffel bag carrying case.Works on a 3.6V 6400mAh lithium-ion battery.Host interface: USB Type-C.Validate cable performance up to 10GBASE-T via frequency-based measurements.Get connected switch data rate, switch name, IP address, port number, and VLAN.Detect the PoE class (1-8) and power, and perform a load test.Test connectivity to TCP/IP network through IP configuration and ping.Cable diagnostics including length plus IntelliTone, remotes 2-8.Manage results and print reports from LinkWare PC
Analog tone and probe is the best choice for toning and tracing wire on non-active networks, and specifically for identifying individual pairs with SmartTone technology..Interfaces/ports: Tone mode, 1 x RJ 11.Material: Copper.Storage temperature: 40 - 158 deg F.Humidity range operating: 5 - 95% (non condensing).Connectors: BNC, RJ 11.Output voltage level in continuity mode: 8 Vdc with fresh battery, over voltage protection: 60 VDC in toner/polarity mode.Frequency: 1000/1500 Hz nominal, battery: 9 V alkaline.On/off push button.Loud large speaker amplifies tone through walls, enclosure, wood or plaster.Tests, tools and measurements: Toning.Quick twist tip for easy replacement, easy to use adjustable volume control dial.Includes: analog toner, probe.Application/usage: Cable testing.SmartTone provides five distinct tones for exact pair identification.Loud tones can be send up to 10 miles (16 kilometers) on most cables, this tone change you hear through the probe positively verifies the correct wire pair.Warranty: 18 months limited.Fluke Networks Pro3000 Series Analog Tone and Probe Kit - Identify Inactive Lines Fast
The Fluke Networks 44300000 d-snip cable scissors allow you to easily cut through cables and wires with a single tool. The scissors are a great choice for minor electrical work, including line splicing, installation, and removal..Made with high-quality forged steel for cleaner, faster cuts.Minimize hand fatigue with the special tail on the handle.File and scraper on both blades for cleaning wire.Notched blade for stripping 19 and 23-gauge wire.Cuts up to 16-gauge solid and 12-gauge stranded wire.Serrated blade or non-slip wire cutting.Includes: One pair of D-snips.90 days limited warranty.Fluke Networks 44300000 D-Snip Cable Scissors - Cleanly Cut Wires