Intel Ethernet Network Adapters
4 results
Intelās family of IntelĀ® Ethernet X520 server adapters with SFP+ connectivity are the most flexible and scalable Ethernet adapters for todayās demanding data center environments..Interface: 1 x 10GBase-SR.Network adapter speed: Up to 10 Gb/s.Form factor: Plug in card.Ports: 1 x LC.Connectivity media: Fiber 10Gbase-LR.Intel Ethernet server adapter X520 series.Optical wave length: 1310 nm.Media & performance.Lifetime limited warranty.Ethernet SFP+ LR optics is designed for the Intel ethernet converged network adapters.
IntelĀ® 4-Port ethernet server adapter has 4 x PCI express 2.1 host interfaces and supports PC as well as server platforms. Adapter includes 4 RJ-45 ports and uses copper as conducting material to resist corrosion..Dimensions: 2.7"H x 5.3"W.For PC.Form factor: Plug-in card.Conductor: Copper.Host interface: PCI Express 2.1 x4.Network technology: 10/100/1000Base-T.Total number of ports: 4.Connectivity technology: Wired.Cabling type: Cat 5 up to 100 m, Bracket height: Low and full-height.Storage over Ethernet: iSCSI, NFS.Speed: 5 GT/s, Slot width: x4 lane.Thermal design power: 5 W.Addresses the demanding needs of the next-generation agile data center by providing unmatched features for both server and network virtualization, flexibility for LAN and SAN networks, and proven, reliable performance.Certifications and standards: ACPI, BSMI, C-Tick, FCC, KCC, UL, VCCI.IntelĀ® 4-Port ethernet server adapter has 10/100/1000Base-T network technology and supports twisted pair media to reduce signal interference.
This Intel adapter has one 10GBASE-SR port for your device and offers speeds of up to 10 Gbps, so you can transfer data quickly. The plug-in card is easy to install, and it is hot swappable, so you don't need to restart your computer when you're going to.Interface: 1 x 10GBase-SR.Network adapter speed: Up to 10 Gb/s.Form factor: Plug in card.Ports: 1 x LC.Operating temperature: 0 - 70 deg C.Transmission distance up to 300 m.Application/usage: Optical network, data networking.Hot-swappable.Sub watt power consumption: 0.65 W.3 years limited warranty.Intel Adapter - Networking and Network Adapters
The Intel Ethernet Network Adapter I226-T1 is ideally suited for personal computers and workstations used for enterprise, gaming, and home networks. These systems require more bandwidth than ever before. This ultra-compact, easy-to-integrate PCIe 3.1 x1 adapter, is a cost-effective networking solution for speeds up to 2.5GbE. The I226-T1 is also designed with a ventilated bracket, for increased efficiency and reduced power consumption..Ethernet Network Adapter.Maximum Data Transfer Rate: 2.50 Gbit/s.Network Technology: 2.5GBase-T.Form Factor: Plug-in Card.Bracket Height: Low Profile and Full Height.Device Supported: Computer/Workstation.Chipset Model: I226-LM.Host Interface: PCI Express 3.1 x1.Number of Network (RJ-45) Ports: 1
You May Also Like
Intel provides data centers worldwide with innovative Ethernet components and solutions that are extensively tested for network interoperability, reliability, and performance. Intel Ethernet controllers, adapters and accessories deliver speeds from 1 to 100GbE - with versatile capabilities to optimize workload performance..Intel X710 Ethernet adapter delivers high speeds and versatile capabilities to optimize workload performance.Data rate per port: 10GbE/5GbE/2.5GbE/1GbE/100Mb.Equipped with four Ethernet ports.Compatible with motherboards equipped PCIe x8 system interface.Features: On-chip QoS and Traffic Management, Flexible Port Partitioning, Virtual Machine Device Queues (VMDq), PCI-SIG SR-IOV Capable, Intel Data Direct I/O Technology, Intelligent Offloads, Storage Over Ethernet (iSCSI, NFS).Cabling type: RJ45 CAT-6, CAT-6a, CAT-5e up to 328'.5-year manufacturer limited warranty
The Allied Telesisā¢ AT-2914SX/LC-901 Optical fiber network adapter provides 1 Gbps networking over an existing optical fiber media. It features PCIe x1 slot for high-speed connection. This plug-in card supports 1000Base-SX network technology for added flexibility..Network adapter delivers high performance.Speed: 1 Gbps.Dimensions: 2.7"H x 3.5"W.Meets RoHS, REACH, WEEE, C-Tick, EN55022 Class A, EN55024, RoHS, TUV, UL and VCCI certifications and standards.Host interface: PCIe x1.Media type supported: Optical fiber.Network technology: 1000Base-SX.Color: Green/silver, Form Factor: Plug-in card.Connectivity: Wired.Network standards: IEEE 802.1p, IEEE 802.1Q, IEEE 802.1x, IEEE 802.2, IEEE 802.3ac, IEEE 802.3ad (LACP), IEEE 802.3z.System requirements: Linux, Microsoft Windows Vista/7/8/10.Remote management protocol: SNMP, Status indicators: Link/activity
Intel I350-T2 chipset supports reliable and advanced network connectivity Compliant with IEEE 802.3, 802.3u, 802.3ab with full duplex and Wake-on-LAN support..Type of Product/Use: Gigabit Ethernet Card for Server.Adapter Speed: Gigabit Ethernet.Number of ports and Type:2 RJ-45.Dimensions as H x W x D in inches: 0.79" x 5.43" x 4.72".Installation Info: Plug-in Card.Warranty: 1 Year.Features innovative power management including Energy Efficient Ethernet (EEE) and DMA Coalescing to increase efficiency and reduce power consumption.Fits both standard and low profile system chassis with the included spare low profile bracket.ā WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.Quickly adds two independent Gigabit Ethernet ports through an available PCI Express slot to server or desktop systems
The Ciscoā¢ GLC-TE= Gigabit Ethernet SFP transceiver module is suitable for 7700 F3-series, 9372PX and 9396PX Cisco Nexus series switches. This SFP transceiver module has RJ-45 1000Base-T network LAN ports for connectivity. It supports twisted pair media for reliable data transfer..SFP transceiver module for 7700 F3-series, 9372PX and 9396PX Cisco Nexus series switches.Color: Silver.Connectors: One RJ-45 1000Base-T network LAN.Media type supported: Twisted pair.Ethernet technology: Gigabit Ethernet
Add a 1GbE SFP module to a PCI Express (PCIe) 2.1 x1 (or higher) slot in an IT Administrator workstation or server backplane, using StarTech this 1-Port SFP network controller. The network controller features an Intel I210 chip known for its reliability and high-performance capabilities, offering low-latency and low CPU utilization, ensuring smooth and efficient network data transfer, which is critical for business applications and services. Support for VMDq, SR-IOV, and Intel VT-c technologies allow for enhanced virtual machine performance, reduced CPU overhead, and improved network virtualization capabilities. The PCIe network card supports PXE boot, enabling centralized operating system deployment and updates. It also features 9K jumbo frame support, reducing packet overhead for improved data transmission efficiency. VLAN tagging support allows for efficient network management and segmentation..Network controller to add a 1GbE SFP module to a PCI Express (PCIe) 2.1 x 1 (or higher) slot in your workstation.Provides Ethernet speeds up to 1Gbps.Has one SFP slot.Compatible with both MSA-compliant and branded 1GB SFP modules, as well as direct attach copper cables (DACC).Meets or exceeds WEEE standards.Intel I210 chip offers low latency and low CPU utilization and ensures smooth and efficient network data transfer, which is critical for business applications and services.Support for VMDq, SR-IOV, and Intel VT-c technologies allows for enhanced virtual machine performance, reduced CPU overhead, and improved network virtualization capabilities.SFP slot for interchangeable SFP modules allows selecting fiber transceiver modules that best suit the network needs of the application, based on the distance and connector type.Full-profile bracket are installed by default, with a low-profile bracket included.PXE boot enabled for centralized OS deployment and updates.9K jumbo frame support for reduced packet overhead.VLAN tagging support for efficient network management.2-year manufacturer limited warranty
Ciscoā¢ NIM-1MFT-T1/E1 1 Port Multi-Flex WAN Interface Card.Interface: One T1/E1.Dimensions: 1.3"H x 3.5"W x 7.2"D.Network technology: T1/E1.Network technology: T1/E1.Maximum data transfer rate: 1.54 Mbps T1 and 2.05 Mbps E1.Compatibility: Cisco 4400 series integrated services routers.Specification: Clear-channel data, MFT packet voice.Support multiple integrated data, voice and video applications while facilitating the migration from data-only and circuit-switched voice services.Weight: 0.4 lbs.
The Allied Telesisā¢ AT-SPSX-90 SFP (mini-GBIC) module is perfect for data networking and optical network. This multi-mode module with SX network works based on 1000Base-SX Gigabit Ethernet technology. The hot-swappable module supports a maximum distance of 1804.46' and maximum data transfer rate of 1.25 Gbps. It has 1 x LC 1000Base-SX network interface for external connections. This module supports 62.5/125 mu m and 50/125 mu m optic fiber..Hot-pluggable SFP (miniGBIC) module is perfect for data networking.Connectors: 1 x LC.Ethernet technology: Gigabit Ethernet.Network technology: 1000Base-SX.Data transfer rate: 1 Gbps.Media type: 62.5/125 mu m, 50/125 mu m multi-mode optical fiber.Maximum reach: 220m/550m.Wavelength: 850 nm.Meets Eco, RoHS, WEEE, REACH standards
Increase your bandwidth up to 10 Gbps with this StarTech SFP+ card for enhanced data transfer rate using fiber optic cable. Reduce wait times for large file transfers, content sharing, network storage, or any other high bandwidth application. This PCIe network card has an open SFP+ slot that can accept any MSA-compliant module or direct attach cable (DAC). It is compatible with multimode, single-mode, and copper SFP+ modules. This card is natively supported in Windows 11. For security and privacy reasons a fiber network card is the ideal point-to-point network adapter. Eliminate EMI with a fiber connection and cover longer distances with fiber to host..Network controller to add a 10GbE SFP+ module to a PCI Express (PCIe) 3.0 x 4 slot in your workstation.Provides Ethernet speeds up to 10Gbps.Has one SFP+ slot.Compatible with both MSA-compliant and branded 10GB SFP+ modules.Meets or exceeds the RpHS and WEEE standards.An open SFP+ slot to make changes as needed just by swapping the module in use, whether it is fiber, copper, or direct attach cables (DAC).9K jumbo frame support for reduced packet overhead.VLAN tagging support for efficient network managemen.Full-profile bracket are installed by default, with a low-profile bracket included.2-year manufacturer limited warranty
IntelĀ® Ethernet server adapter consists of data link protocols such as 10MB LAN, 100MB LAN and gigabit LAN. Adapter supports twisted pair media type and has audio video bridging with power management technologies..Network adapter interface: PCI express x1.Adapter represents the next step in the Gigabit Ethernet networking evolution for the enterprise and data center, offering audio video bridging.Dimensions: 2.6"(H) x 0.7"(W).Ports: Single port, Card height: Low-profile, full-height, Connector and cable: RJ-45 copper, Cable type: Category-3, category-5, category-5e up to 100 m.Media and performance: Category 5e twisted pair.Network and communication: 10/100/1000base-T.Device supported: PC, Mac.Form factor: Plug-in card.Ethernet controller: Intel Ethernet controller I210.Package includes: Ethernet server adapter I210, low-profile bracket.Standards and certificates: FCC B, UL CE, VCCI, BSMI, CTick, KCC, IEEE standards: 802.1Qav, 802.1Qat, 802.1AS, 802.3, 802.3u, 802.3x, 802.3z, 802.3ab, 802.3az.Warranty: Lifetime.IntelĀ® Ethernet server adapter is a plug in card which has 10/100/1000Base-T network technology and efficiently manages packets with minimum latency.
The AT-2911 Series Gigabit Ethernet Network Adapters are integrated Ethernet network interface cards based on Broadcom's BCM5718 chipset with a PCI Express (PCIe) x1 version 2 interface. The AT-2911 series adapter connects a PCIe compliant computer to a Gigabit Ethernet network. Allied Telesis offers models equipped with a single port interface or dual port interface in the AT-2911 series. The AT-2911 adapter is equipped with single or dual fiber optic connector, copper connector, SFP slot, or a combination of these connectors..This Gigabit Ethernet card guarantees a replacement networking interface to client, server or workstation.Enjoy superfast data transfer of up to 250 MB/s with PCI Express x1 card, between the network card and motherboards.With the 1000Base-X technology get up to 1000Mbps data transfer rate over the supported network cable
Industry standard Cisco small form factor pluggable (SFP) gigabit interface converter is a hot-swappable input/output device that plugs into a gigabit Ethernet port or slot, linking the port with the network..Interfaces/ports: 1 x LC duplex 1000Base-LX/LH.Dimensions: 0.3"(H) x 1/2"(W) x 2.2"(D).Compatibility: Cisco IE 3000 series switches, cisco 3200 series rugged routers, cisco MWR 2900 mobile wireless routers.Connectivity technology: Wired.Connectivity media: Single mode fiber 1000Base-LX/LH.Operating temperature: -40 - 185 deg F.Fiber type: SMF/MMF.Cabling type: Ethernet 1000Base-LX.Additional information: Spare product, range: 10 Km, wavelength: 1300 nm.Data transfer rate: 1 Gb/s gigabit Ethernet.Form factor: Hot swappable/plug-in.Application/usage: Data networking.SFP (mini-GBIC) transceiver module 1000 MBPS SFP single mode rugged 1000BASE-LX/LH SFP for MMF and SMF.
StarTech.comĀ® PCI Express gigabit ethernet fiber network card has a dual profile design and includes low profile/half height bracket for easy installation. Card is compatible with Windows 8, 8.1, 7, Vista, XP, Mac OS 10.5, Linux 2.6.x and 3.5.0 OS..1x PCI express x1, 1x SFP slot female.4.6"(H) x 0.7"(W) x 5"(D).Windows 8/8.1 (32/64bit)/7 (32/64)/Vista (32/64)/XP (32/64), Windows Server 2012/2008 R2/2003, Mac OS 10.5 and up (Tested up to 10.9), Linux 2.4.x/2.6.x/3.5.0, Microsoft Hyper-V operating systems.Wired.Data transfer rate: 2 Gbps (full-duplex).Form factor: Plug-in card.Buffer size: 48KB.Power consumption: 3.2 W max.Chipset ID: Realtek RTL8168E, Marvell 88E1111B.LED indicators: Link (green), activity (yellow).Temperature: 0 - 45 deg C operating, -20 - 70 deg C storage, Humidity: 5 - 95% RH (non-condensing).Applications: Ideal for secure setups, perfect for remote embedded industrial monitoring systems, and high-speed video surveillance.Compatible with most Gigabit SFP modules.Supports full/half-duplex auto-negotiation, auto-MDI/MDIX.No electronic interference provides a secure fiber network infrastructure through a direct fiber-to-desktop connection.Adapts to your network configuration using the fiber transceiver of your choice, through an open SFP slot.Includes 1 Port PCI Express Gigabit SFP network card, low-profile bracket, driver CD, instruction manual.Certification and standards: CE, FCC, RoHS.Weight: 2 oz..Warranty: 2 years limited.StarTech.comĀ® PCI Express gigabit ethernet fiber network card supports maximum data transfer rate of 2 Gb/s at full duplex mode and has a SFP female slot to ensure flexible network configuration.
Dellā¢ SonicwallĀ® 1000Base-SX SFP Short haul transceiver module eliminates potential points of failure associated with separate multiple vendor solutions. Module has SFP mini-GBIC compatible slots and supports wired connectivity technology..Interfaces/ports: 1 x Ethernet 1000Base-SX network.Media & performance: Connectivity media: Optical Fiber 1000Base-SX, Data Transfer rate: 1 Gb/s.Ethernet technology: Gigabit Ethernet.For SuperMassive E10000 Series, SuperMassive 9000 Series.Application/usage: Data Networking, optical network.Form factor: SFP.Warranty: 1 year limited.Dellā¢ SonicwallĀ® 1000Base-SX SFP Mini-GBIC short haul transceiver module is used in data networking as well as optical network and has a data transfer rate of 1 Gb/s.
The Intel 2-port Gigabit Ethernet converged network adapter meet the needs of the next-generation agile data center by providing flexibility for LAN/SAN networking. This low profile adapter offers superior performance up to 80 Gb/s bi-directional throughput. It has Ethernet flow director for hardware based application traffic steering and I/O virtualization innovations for optimum performance. This adapter features excellent small packet performance for network appliances and network function virtualization for reliable performance. It has data plane developer kit for efficient packet processing..Gigabit Ethernet network adapter provides unmatched features for virtualization, flexibility for LAN and SAN networking.Interfaces/ports: PCI Express 3.0 x8, SFP+ slot.Management protocols: Large Send Offload (LSO), packet filtering, PXE support, Quality of Service (QoS), Receive Side Scaling (RSS).Data transfer rate: 10 Gb/s.Dimensions: 2.7"H x 6.6"W.Meets BSMI, C-Tick, Directive 2011/65/EU, FCC Class B, KCC, MSA SFF-8431, RoHS, UL and VCCI certifications or standards.Form factor: Plug-in card.Remote management: RMON, SNMP, Network transport protocol: iSCSI, TCP/IP, UDP/IP.Media type supported: Twinaxial, Device supported: Server.Status indicators: Link/activity, port transmission speed.System requirements: FreeBSD 10, FreeBSD 9, Linux Kernel 2.6.32, Linux Kernel 3.x, Microsoft Windows Server 2008/Server 2008 R2/Server 2008 R2.Operating temperature: 32 - 131 deg F.Comes with lifetime limited warranty
The Omnitron 01-01-7207 SFP optical transceiver enables a single network device to connect to a wide variety of flexible fiber and copper cable through its interchangeable, compact media connectors. It is compatible with iConverterĀ®, FlexPointā¢, OmniConverterā¢ and miConverterā¢ products to meet specific network protocols and media requirements. This transceiver supports digital diagnostic by providing enhanced diagnostic information. The compact design and the ease of interchangeability of this unit provide a flexible solution for network designs..Optical transceiver module is compatible with iConverter media converter modules, T1/E1 multiplexers and network interface devices.LC duplex 1000Base-LX network.Media type supported: Optical fiber, fiber mode supported: Single-mode, fiber optic cable standard: 9/125 ohm m.Form factor: Hot-pluggable, hot-swappable, data transfer rate: 1.25 Gbps.Compatible with FlexPoint, OmniConverter and miConverter media converter modules that support SFP transceivers.Compliant with IEEE 802.3u fast Ethernet and 802.3z gigabit Ethernet specifications.Supports operational data rates for SONET OC-3/12/48, SDH STM-1/4/16 and fiber channel x1/x2.Supports a wide variety of cable types, supports digital diagnostic capability, low EMI metal enclosure.Temperature: 0 to 50 deg C commercial, -40 to 80 deg C storage.Meets RoHS, Green, WEEE standards.Comes with 1 year warranty.Certifications and standards: Compliant with MSA SFF-8472 standard.OMNITRON SYSTEMS iConverter 1000Base-LX SFP Optical transceiver supports data transfer rate of 1 Gb/s and is suitable to use with networking applications.
Omnitron Pluggable optical transceiver operates at 850 nm wavelength and covers a maximum distance of up to 1800'. Transceiver is compatible with iConverter media converter modules, T1/E1 MUXes and network interface devices..Interfaces/ports: 1 x LC 1000Base-SX.Connectivity media: Multi-mode optical fiber.Ethernet technology: Gigabit Ethernet.Form factor: Plug-in module.Data rate: 1 Gbps.Cable distance: 550 meters.Wavelength: 850 nm.Application/usage: Data networking.Connectivity technology: Wired, Min. Tx Power (dBm): -9.5, Max. Tx Power (dBm): -4,Min. Rx Sense (dBm): -17, Max. Rx Power (dBm): -3, Link budget (dBm): 7.5.Low EMI metal enclosure, supports a wide variety of cable types.Digital diagnostic capability.Pluggable optical transceivers enable flexible fiber and copper connectivity.Warranty: Lifetime.Omnitron Pluggable optical transceiver transfers data at a rate of 1 Gb/s and enables a single network device to connect to a wide variety of fiber optic cable types.