Managed Switches for Home

The GS110TPv3 eight-port Gigabit Ethernet Smart Managed Pro switch provides a great value, with configurable L2 network features like VLAN and PoE operation scheduling, allowing SMB customers to deploy PoE-based VoIP phones and IP surveillance. Advanced features such as Layer 3 static routing, IPv6 management, ACL, DiffServ QoS, LACP link aggregation and spanning tree will satisfy even the most advanced small business networks. Remote/cloud management capability with NETGEAR Insight. By activating the NETGEAR Insight cloud management, the users will enable fundamental management features allowing businesses to have simpler configuration and deployment from anywhere using the NETGEAR Insight app from mobile devices or the Insight Cloud Portal from any device with a web browser..Smart Gigabit Ethernet switch with cloud management provides LAN access for eight users.Eight 10/100/1000BASE-T RJ45 ports and two dedicated 1000BASE-X SFP fiber ports.Easy to manage via web-based management GUI or Smart Control Center.Bandwidth: 20Gb/s.Dimensions: 1.1"H x 9.3"W x 4"D.69.5W maximum power consumption (with all ports used, full PoE, line-rate traffic); 15.1W maximum power consumption (with all ports used, line-rate traffic); 4.3W minimum power consumption (link-down standby); features IEEE 802.3az for maximum power savings.Fanless design allows for silent operation, great for deployment in noise-sensitive environments.Features VESA holes for desktop and wall-mounting.Flexible and cost-effective solution for SMB data, voice, and video converged network.55W PoE budget is available across eight Gigabit PoE+ (802.3at/802.3af) ports.Layer 3 static routing with 32 routes (IPv4) for inter-VLAN local routing.Advanced VLAN support for better network segmentation.IGMP Snooping and Querier for multicast optimization.Auto DoS prevention.RMON and SNMP v1, v2c, v3 remote monitoring.L2/L3/L4 access control lists for granular network access control including 802.1x port authentication.Advanced QoS for traffic prioritization including port-based, 802.1p, and L2/L3/L4 DSCP-based.Advanced per-port PoE controls for remote power management of PoE connected devices including operation scheduling.Remote/cloud management capability with NETGEAR Insight app.Lifetime manufacturer limited warranty; 2-year manufacturer limited warranty on power adapter

The GS108Tv3 eight-port Gigabit Ethernet Smart Managed Pro switch provides a great value, with flexible and cost-effective solution for SMB data, voice, and video converged network. Advanced features such as Layer 3 static routing, IPv6 management, ACL, DiffServ QoS, LACP link aggregation and spanning tree will satisfy even the most advanced small business networks. Remote/cloud management capability with NETGEAR Insight. By activating the NETGEAR Insight cloud management, the users will enable fundamental management features allowing businesses to have simpler configuration and deployment from anywhere using the NETGEAR Insight app from mobile devices or the Insight Cloud Portal from any device with a web browser..Smart Gigabit Ethernet switch with cloud management provides LAN access for eight users.Eight 10/100/1000BASE-T RJ45 ports.Easy to manage via web-based management GUI or Smart Control Center.Bandwidth: 16Gbps.Dimensions: 1.1"H x 6.2"W x 4"D.5.5W maximum power consumption (with all ports used, line-rate traffic); 1.9W minimum power consumption (link-down standby); features IEEE 802.3az for maximum power savings.Fanless design allows for silent operation, great for deployment in noise-sensitive environments.Features VESA holes for desktop and wall-mounting.Flexible and cost-effective solution for SMB data, voice, and video converged network.Features one PD port to receive power from another PoE switch or injector.Layer 3 static routing with 32 routes (IPv4) for inter-VLAN local routing.Advanced VLAN support for better network segmentation.IGMP Snooping and Querier for multicast optimization.Rate limiting and priority queuing for better bandwidth allocation.Auto DoS prevention.RMON and SNMP v1, v2c, v3 remote monitoring.L2/L3/L4 access control lists for granular network access control including 802.1x port authentication.Advanced QoS for traffic prioritization including port-based, 802.1p, and L2/L3/L4 DSCP-based.Remote/cloud management capability with NETGEAR Insight app.Lifetime manufacturer limited warranty; 2-year manufacturer limited warranty on power adapter

Supports the needs of edge networking and automated management of prioritized voice, video, and data traffic..8 Gigabit Ethernet ports.Management software with easy-to-use GUI interface offers refined control for secure setup, access, and SNMP (NMS 300) management..The fanless design means zero added noise wherever its located, making it ideal for noise-sensitive environments.Designed to optimize power usage lowering its cost to operate. Most models are compliant with IEEE802.3az Energy Efficient Ethernet mode..Every NETGEAR Network switch is rigorously tested for reliability, quality, and performance..Dimensions in Inches: 6.2L x 4W x 1.1H; Weight in Pounds: 1

Introducing the NETGEAR MS510TXUP Multi-Gigabit/10G Ethernet Ultra60 PoE++ Smart Switch with 2 SFP+ Ports and 295W PoE budget for WiFi 6 Access Point connectivity and power..Four 1G/2.5G Ethernet ports and Four Multi-Gig/10G Ethernet ports.8 PoE++ ports with 295W total power budget.2 x 10G SFP+ ports.Management software with easy-to-use GUI interface offers secure setup, access, and SNMP (NMS 300) management. Includes NETGEAR Insight to remotely manage your networks from anywhere..Supports desktop or rackmount placement, and includes all the necessary mounting hardware in the box.Reduces fan noise to protect your home office or business environment..Covered by ProSAFE, an industry-best Lifetime Limited Hardware Warranty, Next Business Day Replacement and 24/7 chat with a NETGEAR expert.Designed to optimize power usage lowering its cost to operate. Most models are compliant with IEEE802.3az Energy Efficient Ethernet mode..Every NETGEAR Network switch is rigorously tested for reliability, quality, and performance..Dimensions in Inches: 13L x 8.12W x 1.7H; Weight in Pounds: 5.5.Insight Cloud Management, Desktop/Rackmount, ProSAFE Lifetime Protection

The NETGEAR XS512EM Plus Switch is designed for desktop or rackmount and features 12-Ports of 100M/1G/2.5G/5G/10G Multi-Gigabit Ethernet, 2 x 10G SFP+ ports (2 are shared), ProSAFE Lifetime Protection and more..12 Multi-gig/10G Ethernet ports.2 x 1G/10G SFP+ ports (both are shared).Management software with easy-to-use GUI interface offers basic capabilities to configure, secure, and monitor your network..Supports desktop or rackmount placement, and includes all the necessary mounting hardware in the box.Reduces fan noise to protect your home office or business environment..Covered by an industry-best Lifetime Limited Hardware Warranty, Next Business Day Replacement and 24/7 chat with a NETGEAR expert.Designed to optimize power usage lowering its cost to operate. Most models are compliant with IEEE802.3az Energy Efficient Ethernet mode..Every NETGEAR Network switch is rigorously tested for reliability, quality, and performance..NETGEAR Plus Switch

The NETGEAR GS105Ev2 Plus Desktop Switch features 5-Port Gigabit Ethernet, ProSAFE Lifetime Protection and more..5 Gigabit Ethernet ports.Management software with easy-to-use GUI interface offers basic capabilities to configure, secure, and monitor your network..Supports desktop or wall mount placement.The fanless design means zero added noise wherever its located, making it ideal for noise-sensitive environments.Covered by an industry-best Lifetime Limited Hardware Warranty, Next Business Day Replacement and 24/7 chat with a NETGEAR expert; 2 years warranty on power adapter.Designed to optimize power usage lowering its cost to operate. Most models are compliant with IEEE802.3az Energy Efficient Ethernet mode..Every NETGEAR Network switch is rigorously tested for reliability, quality, and performance..Certifications and standards: CE, FCC Part 15, VCCI, RCM, KCC, EAC, CCC, CE LVD.NETGEAR Plus Switch

18% off  of Netgear Plus 5-Port Gigabit Ethernet Managed Switch, 10/100/1000 Mbps (GS305EPP-100NAS)

Netgear Plus switches with PoE meets business networks growing need by providing fundamental network features such as simplified VLANs, QoS set-up and IGMP Snooping that will help optimize the performance of business networks. Plus switches are the perfect upgrade from the plug-and-play unmanaged switch, delivering essential networking features at a very affordable price. These models support Power-Over-Ethernet (PoE) and can power devices such as VOIP phones, surveillance IP cameras, wireless access points and many other applications. These new PoE+ Gigabit Ethernet Plus switches models include uninterruptable PoE to help optimize the performance and troubleshooting of business networks. The new and improved business-friendly GUI allows easy management and simple configuration. With the growing deployment of applications and an all-in-one solution, providing management and power to these applications would be perfect..Desktop managed switch with PoE meets business networks' growing need by providing fundamental network features that will help optimize the performance of business networks.Contains five 10/100/1000 RJ45 copper ports (auto uplink).Enable network configuration and management at the price point of unmanaged switches.Dimensions: 1.1"H x 6.2"W x 4"D.Certifications and standards: Meets or exceeds CE mark, commercial FCC Part 15 class B, CE/EN55032/24, VCCI, ACMA, CSA safety, KC, BSMI standards.Simple, yet useful network set-up on top of plug-and-play connectivity.Business-friendly and easy-to-use web browser-based management GUI.VLAN support for traffic segmentation.Quality of Service (QoS) for traffic prioritization.Auto “denial-of-service” (DoS) prevention.Troubleshoot connection issues via cable test.Features port mirroring for network monitoring, jumbo frame support, per port PoE controls, uninterrupted PoE keeps PoE power on even when the switch is updating firmware or performing software reboot, 802.3at standard offering 30W/port.5-year manufacturer limited warranty

This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 8x gigabit Ethernet and 2x 10Gbps SFP+ port engineered for 1Gb AV over IP.8 PoE+ ports (30W/port) provide a total of 220W of power, so you can power and connect your devices with a single wire.56Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power adapter, power cord, console USB Type-C cable, flat brackets for desktop or wall mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty

This switch is a next generation smart managed switch with 52Gbps switching capacity. It provides (24) 10/100/1000Base-T copper ports with IEEE 802.3at PoE+ capability and (2) additional 100/1000 dual speed SFP slots. The embedded Device Management System (DMS) provides the benefits of ease of use in the IP surveillance, wireless Access Point and other applications. The DMS capability built into the switches is new from Transition Networks and provides time-saving features enabling security integrators or network administrators to establish and document a baseline deployment, automatically discover and remotely configure attached IP-powered devices (PDs)..IPv6 Access Management.Support Jumbo Frame up to 9K bytes.Authentication - RADIUS, TACACS+.DHCP Relay, DHCP Snooping, DHCP Server.L2/L3/L4 ACLs Support MAC ACL, IP standard/extended ACL.LLDP (Link Layer Discovery Protocol).IEEE 802.3az Energy Efficiency.IP Source Guard, Port Security.Syslog

This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 16x 10Gbps SFP+ ports (first 12 ports support 1Gbps) engineered for 1Gb AV over IP.320Gbps line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty

Expand your network capacity with the help of 8 networking ports and transfer your data quickly and easily.Supports optical fiber cable to span longer distances and provided high data transmission rates between servers and network components.Up to 10x faster than standard Ethernet server connectivity while providing high-performance uplinks.Managed switch provides a reliable foundation for your network

This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 10 x gigabit Ethernet and 2 x 10Gbps SFP+ ports engineered for gigabit AV over IP.8 PoE++ ports (90W/port) provide a total of 720W of power, so you can power and connect your devices with a single wire.60Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty

This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 10 x gigabit Ethernet and 2 x 10Gbps SFP+ ports engineered for gigabit AV over IP.8 PoE+ ports (30W/port) provide a total of 240W of power, so you can power and connect your devices with a single wire.60Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty

The SISPM1040-582-LRT is a full managed PoE++ switch suitable for connecting and powering devices in hardened environment. It has (8) 10/100/1000 PoE++ ports with (2) 100/1000 dual speed SFP slots. The switch can supply up to 90 Watts per port on four ports or 60 Watts per port on eight ports simultaneously. The switch also includes the embedded Device Management System (DMS) software that provides the advanced tools necessary for total management of all IP addressable devices. The unique DMS provides security integrators with lower overall cost, less downtime and easier management of the entire PoE+ network. Transition Networks' hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other challenging environments..IPv4/IPv6 dual protocols.Supports Jumbo Frame up to 9K bytes.Authentication - RADIUS, TACACS+.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

Features auto-negotiation, auto-sensing/device detection, flow control, packet filtering, and store-and-forward capabilities..5 x 10/100/1000Base-T.128KB buffer.Interfaces/ports: 5 x Network (RJ-45), 5 x gigabit Ethernet network.Data transfer rate: 2000 Mbps (full-duplex).Filtering address table: 8K MAC entries/device.Dimensions: 1.2"(H) x 7.8"(W) x 4.5"(D).Power: 5 VDC, 1 A, power consumption: 4.5 W.Media type supported: Cat 5 twisted-pair.Protocol: CSMA/CD.LED indicators:/port: Link/Activity/Speed,/device: power.Management: QoS: 802.1p (4 Queues), Priority queuing.Form factor: Desktop, wall mountable, MTBF: 593,755 hours.Supports jumbo frame packets (max size up to 9.6KB).Network technology: 10/100/1000Base-T Gigabit Ethernet.Certification & standards: FCC Class B, ICES-003 Class B, CE Class B, C-Tick Class B, VCCI Class B, cUL, CB.Weight: 0.57 lbs..Warranty: Lifetime limited.Warranty: Lifetime limited.1.1"(H) x 3.8"(W) x 3.9"(D).Limited lifetime warranty.D-Link Five-Port Unmanaged Switch - Easy Networking

The SW-505-8P-R includes eight 1-Gigabit PoE+ Ethernet ports, two non-PoE Ethernet Ports, and two 1-Gigabit SFP expansion ports. Both 1 Gb SFP ports can be aggregated for a connection speed of up to 2 Gb. The 8 PoE+ ports deliver both gigabit data and power over a single cable to 802.11af/at-compliant devices, with a maximum of 30W per port. For separately powered devices, these ports deliver network connectivity only. The total power budget is 130W for all PoE+ ports combined. The advanced Layer 2/Layer 3 features an easy-to-use management interface that simplifies configuration and make this switch ideal for use in single-switch AVoIP environments. Setup of IGMP/Multicast on a per-port basis is easy, improving the setup and reliability of running audio and video over the network simultaneously. This model also features a fanless design and is perfect for conference rooms, offices, or theaters where silent operation is needed. Watch Video: Meet our SW Series Managed PoE+ Switches.1Gb L2/L3 Managed Switch, EU Power Cord.Dante and AES67 compatibility, AV-over-IP compatible.Dimensions Height 1.75 in, Width 9.52 in Product Weight 5.5 lbs..Color Black, Material Metal.Selling Quantity 1.Refreshed, simplified user interface.Layer 2/Layer 3 capabilities (static routing included).Multicast/IGMP snooping and querying feature.Per port unregistered flooding.802.1Q VLAN and QoS support including DCSP.Dante and AES67 compatibility

SS2GR4000 Series is a L2 Gigabits intelligent switch designed for carrier and MAN networks. It supports comprehensive QoS, enhanced VLAN functions (VLAN VPN, Voice VLAN, QinQ, N:1 VLAN Translation), Ethernet Ring Protection Protocol (G.8032), classified bandwidth control, intelligent security control, OAM(Operations, Administration and Maintenance), manageability functions and Triple-Play services which fulfill the network requirements demanded by carrier network, MAN access. SS2GR4000 Series switch offers green features like IEEE 802.3az (Energy Efficient Ethernet), Fan-less design, which can dramatically lower power consumption, achieve green energy and save the cost for the carrier and MAN users..Features 24 networking ports to meet the requirements of the most demanding workgroups.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network

This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 10 x gigabit Ethernet and 2 x gigabit SFP ports engineered for gigabit AV over IP.8 PoE+ ports (30W/port) provide a total of 125W of power, so you can power and connect your devices with a single wire.24Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty

This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 26x gigabit Ethernet and 4x 10Gbps SFP+ ports engineered for 1Gb AV over IP.24 PoE+ ports (30W/port) provide a total of 480W of power, so you can power and connect your devices with a single wire.132Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty

This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 26x gigabit Ethernet and 4x 1Gbps SFP ports engineered for 1Gb AV over IP.24 PoE++ ports (90W/port) provide a total of 1440W of power, so you can power and connect your devices with a single wire.60Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cords, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty

This switch is a next generation rack mount hardened switch with 136Gbps switching capacity. It provides (24) 10/100/1000 PoE+ ports, (4) 100/1000 dual speeds SFP ports, It has additional (4) 1G/10G SFP+ slots..IPv4/IPv6 dual protocols.Supports Jumbo Frame up to 9K bytes.Authentication - RADIUS, TACACS+.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

Netgear Plus switches with PoE meets business networks growing need by providing fundamental network features such as simplified VLANs, QoS set-up and IGMP Snooping that will help optimize the performance of business networks. Plus switches are the perfect upgrade from the plug-and-play unmanaged switch, delivering essential networking features at a very affordable price. These models support Power-Over-Ethernet (PoE) and can power devices such as VOIP phones, surveillance IP cameras, wireless access points and many other applications. These new PoE+ Gigabit Ethernet Plus switches models include uninterruptable PoE to help optimize the performance and troubleshooting of business networks. The new and improved business-friendly GUI allows easy management and simple configuration. With the growing deployment of applications and an all-in-one solution, providing management and power to these applications would be perfect..Desktop managed switch with PoE meets business networks' growing need by providing fundamental network features that will help optimize the performance of business networks.Contains five 10/100/1000 RJ45 copper ports (auto uplink).Enable network configuration and management at the price point of unmanaged switches.Dimensions: 1.1"H x 6.2"W x 4"D.Certifications and standards: Meets or exceeds CE mark, commercial FCC Part 15 class B, CE/EN55032/24, VCCI, ACMA, CSA safety, KC, BSMI standards.Simple, yet useful network set-up on top of plug-and-play connectivity.Business-friendly and easy-to-use web browser-based management GUI.VLAN support for traffic segmentation.Quality of Service (QoS) for traffic prioritization.Auto “denial-of-service” (DoS) prevention.Troubleshoot connection issues via cable test.Features port mirroring for network monitoring, jumbo frame support, per port PoE controls, uninterrupted PoE keeps PoE power on even when the switch is updating firmware or performing software reboot, 802.3at standard offering 30W/port.5-year manufacturer limited warranty

The TRENDnet TEG-204WS 20-port Gigabit Ethernet rack mountable web smart switch in black, has fanless design and delivers advanced management features with a 40 Gbps switching capacity. It has 16 x Gigabit ports and 4 x shared Gigabit ports (RJ-45/SFP). This switch features local dial in user authentication, 802.1X Port-Based network access control, RADIUS and TACACS+ security systems. It is suitable for traffic control, troubleshooting, access controls and monitoring..Gigabit Ethernet web smart switch provides faster throughput.Ports: (16) Gigabit ports, (4) shared Gigabit ports (RJ-45/SFP).Management: HTTP/HTTPS (SSL v2/3 TLS) web based GUI, SNMP v1, v2c, v3, RMON v1, static unicast Mac address, security: Local dial in user.Dimensions: 1.7"H x 11"W x 7"D.Power consumption: 14.6 W (maximum).Certifications and standards: Meets CE, FCC and UL standards.Has fanless design.Input voltage: 100 to 240 VAC, 50/60 Hz, internal power supply.Form factor: 1U rack mountable, color: Black.Data transfer rate: 20 Mbps (full duplex) Ethernet, 200 Mbps (full duplex) Fast Ethernet, 2000 Mbps (full duplex) Gigabit Ethernet.RAM buffer: 512KB, Mac address table: 8K entries, jumbo frames: 10KB, forwarding rate: 29.8 Mpps (64 byte packet size).Layer supported: 2, media type supported: Twisted pair, optical fiber, network technology: 10/100/1000Base-T, 1000Base-X.Port mirror: RX, TX or both, one-to-one, protocols: IP protocol 0-255, TCP/UDP port 1-65535.Compatible with optional software utility Windows 10, 8.1, 8, 7, Vista, XP, Windows 2003/2008 server.Includes quick installation guide, CD-ROM (utility and users guide), 6' power cord and rack mount kit.Features IPv6, LACP, VLAN, QoS and IGMP snooping, private and voice VLAN support, metal housing and 802.3ad dynamic LACP.Weight: 3.88 lbs..Comes with 3 year warranty

This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 26x gigabit Ethernet and 4x SFP ports engineered for 1Gb AV over IP.24 PoE+ ports (30W/port) provide a total of 300W of power, so you can power and connect your devices with a single wire.60Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty

This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 9x gigabit Ethernet and 1x 1Gbps SFP port engineered for 1Gb AV over IP.8 PoE+ ports (30W/port) provide a total of 110W of power, so you can power and connect your devices with a single wire.20Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power adapter, power cord, console USB Type-C cable, flat brackets for desktop or wall mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty

The SISPM1040-362-LRT is a full managed PoE+ switch suitable for connecting and powering devices in hardened environments. The switch can supply up to 30 Watts per port on all four PoE ports simultaneously. The switch also includes the embedded Device Management System (DMS) software that provides the advanced tools necessary for total management of all IP addressable devices. The unique DMS provides security integrators with lower overall cost, less downtime and easier management of the entire PoE+ network. Transition Networks' hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other challenging environments..Store-and-Forward Architecture with 16 Gbps Switching Bandwidth.Supports Jumbo frames up to 9.6K Bytes.Ring Protections: Industry standard G.8032 Ethernet Ring Protection Switching (ERPS), Support G.8031 Ethernet Linear Protection Switching (EPS), Rapid Ring with recovery time less than 20ms.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

36% off  of Netgear 300 Series Plus 5-Port Gigabit Ethernet Managed Switch, Black (GS305E-100NAS)

The Netgear 300 Series Plus five-port Gigabit Ethernet switch provides exceptional value to businesses looking to increase network visibility and control while enjoying plug-and-play connectivity. The switch meets this growing need by providing fundamental network features such as VLANs, QoS, and IGMP snooping that will help optimize the performance of business networks. The Plus switch is the perfect upgrade from the plug-and-play unmanaged switch, delivering essential networking features at a very affordable price..Managed switch with five ports provides gigabit Ethernet connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Ensures automatic connection at the highest common speed between the switch and end device.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI or using the PC-based Utility application.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Meets or exceed the CE mark (commercial), FCC Part 15 class B, CE/EN55032/24, VCCI, ACMA standards.VLAN support for traffic segmentation.Auto denial-of-service (DoS) prevention.Troubleshoot connection issues via cable test.Loop detection and broadcast storm controls.Rate limiting for better bandwidth allocation.Port mirroring for network monitoring.Silent operation makes this switch perfect for noise-sensitive environments.This switch is designed to optimize power usage, lowering cost of operation as a result.5-year manufacturer limited warranty.The NETGEAR 5-Port Gigabit Ethernet Plus Switch provides exceptional value to businesses looking to increase network visibility and control while enjoying plug-and-play connectivity.

NETGEAR Plus switches with PoE meet business networks growing needs by providing fundamental network features such as simplified VLANs, QoS set-up and IGMP Snooping that will help optimize the performance of business networks. Plus Switches are the perfect upgrade from the plug-and-play unmanaged switch, delivering essential networking features at a very affordable price. The Netgear MS108EUP supports 2.5 Gigabit speed connectivity and Power-Over-Ethernet (PoE) that can provide up to 60W/port. This switch can power devices such as VoIP phones, surveillance IP cameras, wireless access points and many other applications. Netgear Plus switch includes advance PoE control to help optimize the performance and troubleshooting of business networks. The new and improved business-friendly GUI allows easy management and simple configuration. With the growing deployment of applications and an all-in-one solution, providing management and power to these applications would be perfect..8 x multi-gigabit Ethernet ports provide up to 2.5Gbps of dedicated non-blocking bandwidth each.4 x Ultra60 PoE++ and 4 x PoE+ ports provide a total of 230W of power, so you can charge and connect your devices with a single wire.40Gbps (10/100/1000Mbps) line-rate fabric ensures congestion-free connectivity with your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Business-friendly and easy-to-use web browser-based management GUI.Energy-Efficient Ethernet (IEEE 802.3az) support for maximum power savings.Advanced PoE controls: manage PoE prioritization, scheduling, power limit per port, and more for simple control over all PoE-powered devices.Fanless design makes this switch perfect for noise-sensitive environments.Simple, yet useful network set-up on top of plug-and-play connectivity.VLAN support for traffic segmentation.Auto “denial-of-service” (DoS) prevention.Energy-Efficient Ethernet (IEEE 802.3az) support for maximum power savings.Port mirroring for network monitoring.Loop prevention and broadcast storm controls.Lifetime 24/7 chat technical support.Lifetime manufacturer limited warranty

748305aacfb94d13fcf70f731a800a0a.Features 24 networking ports to establish large network.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.Gigabit Ethernet port for ultra-fast network speeds.Layer 2 switch provides a complete lineup of features including IGMP snooping, port mirroring, and spanning tree.Management capability provides control over setup and configuration of your network.Built-in power supply to ensure all components are being supplied with accurate voltage.Rack mounting enables you to organize wires & secure cables for professional installation

D-Link DGS-1100 series is a range of switches designed to meet the requirements of small, medium, and enterprise businesses. Support for multiple PoE standards make the DGS-1100 series perfect for IP surveillance deployments. Advanced management features, a range of diagnostic and troubleshooting tools, and energy efficient technologies provide a flexible solution to meet your networking requirements..Desktop switch offers highly flexible solution for the needs of a diverse range of businesses with support for PoE, advanced management, troubleshooting tools, and energy-efficient technology.Contains eight 10/100/1000Mbps ports (PoE).Supports an intuitive client-based utility (D-Link Network Assistant) and a web-based management interface.IGMP snooping is able to reduce the load of L3 multicast routers and save bandwidth in network throughput.Dimensions: 1.1"H x 6.7"W x 3.9"D.Maximum power consumption: 77.9W (PoE on), 4.6W (PoE off).Certifications and standards: Meets or exceeds FCC Class B, CE Class B, VCCI Class B, BSMI, cUL, CE LVD, CB standards.Fanless design for a longer product life and silent operation.Bandwidth Control ensures latency-sensitive traffic always gets the bandwidth it needs.Quality of Service further prioritizes latency-sensitive traffic, ensuring timely delivery.Segregate different types of traffic, such as surveillance or voice, with VLANs to heighten security.PD Alive feature automatically reboots malfunctioning connected PoE devices to mitigate downtime.Innovative energy-saving features are good for your budget, as well as the environment.Equipped with advanced security features, such as static MAC, storm control, and IGMP snooping.Features Loopback Detection and Cable Diagnostics to help network administrators find and solve network problems quickly and easily.Provides Power over Ethernet (PoE) support, reducing deployment time for IP cameras, VoIP phones, and access points.Can be powered by a PoE switch or injector, allowing for more flexible installation in remote areas with no available power outlets.Comes in black

The D-Link DGS-1100 series' web user interface gives administrators an easy way to manage Layer 2 features, such as VLANs, Spanning Tree Protocol (STP), and link aggregation (desktop models utilize Static Trunk). With powerful security features including IGMP snooping, Static MAC, and Storm Control, these smart-managed switches are a versatile solution for deployments that require easy-to-configure functionality without added complexities. D-Link's free Network Assistant (DNA) utility displays all your connected devices and makes first-time configuration a breeze. The free D-View 7 Network Management System comes with a license for 25 nodes and two probes and full access to the management tools. The desktop models in the series utilize a fanless design, for silent and energy-efficient operation..Eight-port gigabit smart managed switch is a powerful and flexible networking solution for small, medium, and enterprise businesses.Switching capacity: 16Gbps; packet forwarding rate: 11.9Mpps.Comes in a compact fanless desktop design for silent and energy-efficient operation.Features a complete web interface for comprehensive switch management.Free D-View 7 Network Management System comes with a license for 25 nodes, two probes, and full access to the management tools.Maximum power consumption: 4.94W.With powerful security features including IGMP snooping, Static MAC, and Storm Control, these smart managed switches are a versatile solution for deployments that require easy to configure functionality without added complexities.Features Loopback Detection and Cable Diagnostics to help network administrators find and solve network problems quickly and easily.Loopback Detection detects loops created by a specific port and automatically shuts it down.Cable Diagnostics feature is designed for network administrators to quickly examine the quality of the copper cables, recognize the cable type, and detect cable errors.Advanced D-Link Green technology allows to save power without sacrificing performance.Supports half/full-duplex operation (half at 10/100 Mbps, full at 1000 Mbps).IEEE 802.3az compliant and features Link Status detection.Lifetime manufacturer limited warranty

Enjoy high speed, reliability, and flexibility by expanding your business's network capacity with the M4300-8X8F 16-Port RJ45/SFP+ 10G Managed Network Switch from Netgear. Pre-configured for AV-over-IP, this fully managed switch includes Layer 2, 3, and 4 feature sets, such as hot-swappable mixed stacking, with up to eight switches in a single logical switch. However, there are no license requirements to support video broadcast and other high-bandwidth applications. The M4300-8X8F features sixteen 10G ports, comprised of eight RJ45 copper wire connectors and eight SFP+ fiber optic transceiver slots. This switch is designed to smoothly transfer data with a 320 Gb/s switching capacity and 238 Mpps forwarding rate. Your data is secured by features such as access control, private VLANs, and denial of service (DoS) attack protection. The half-width design allows you to install two switches into the same rackmount space for redundancy. A modular 250W power supply is included..16 Ethernet ports, is classified as a High-Performance switch, and offers Managed network management..Switch supports ultra-fast connectivity with a 10Gbps data transfer rate on each port, ensuring high-speed performance for demanding networks..Compact half-width design and 1RU rack-mountable form factor, allowing flexible installation in space-constrained environments..Full SNMP support (v1, v2c, and v3) for comprehensive network monitoring and centralized management..Equipped with advanced Quality of Service capabilities, including DiffServ, Auto-VoIP, and Auto-iSCSI prioritization, to optimize traffic for voice and storage applications..robust management options via CLI and Web GUI, along with security features like ACLs, DHCP Snooping, IP Source Guard, and DoS protection for network integrity..Robust management options via CLI and Web GUI, along with security features like ACLs, DHCP Snooping, IP Source Guard, and DoS protection for network integrity..Delivers 320Gbps switching capacity and supports Layer 2, Layer 3, and Layer 4 operational modes, ensuring scalability and flexibility for enterprise networks..Operates with up to 250W power draw and intelligent fan control, promoting energy efficiency and reduced operational costs..IEEE 802.3 standards and OpenFlow 1.3, making it SDN-ready and suitable for modern networking environments..Authentication method: RADIUS, TACACS+.Form factor: Rack mountable

Netgear 300 Plus switches with PoE meets business networks growing need by providing fundamental network features such as simplified VLANs, QoS set-up and IGMP Snooping that will help optimize the performance of business networks. Plus switches are the perfect upgrade from the plug-and-play unmanaged switch, delivering essential networking features at a very affordable price. These models support Power-Over-Ethernet (PoE) and can power devices such as VOIP phones, surveillance IP cameras, wireless access points and many other applications. These new PoE+ Gigabit Ethernet Plus switches models include uninterruptable PoE to help optimize the performance and troubleshooting of business networks. The new and improved business-friendly GUI allows easy management and simple configuration. With the growing deployment of applications and an all-in-one solution, providing management and power to these applications would be perfect..Managed switch delivers essential business networking features and powers PoE+ devices such as VoIP phones, IP cameras, and more.Contains 16 x 10/100/1000 RJ45 copper ports (auto uplink).Business-friendly and easy-to-use web browser-based management GUI.Dimensions: 1.06"H x 11.26"W x 4.02"D.Certifications and standards: Meets or exceeds CE mark, FCC Part 15 class B, CE/EN55032/24, VCCI, ACMA, CSA safety, KC, BSMI standards.Fanless design for silent operation makes this switch perfect for noise-sensitive environments.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.16 ports provide up to 1000Mbps of dedicated, non-blocking bandwidth each.10Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.15 PoE+ ports provide a total of 231W of power so you can power and connect your devices with a single wire.Manage PoE prioritization, PoE power limit per port, PoE scheduling, and more for simple control over all PoE-powered devices.Simple, yet useful network set-up on top of plug-and-play connectivity.Quality of Service (QoS) for traffic prioritization.Port mirroring for network monitoring.Rate limiting for better bandwidth allocation.Features auto "denial-of-service" (DoS) prevention, troubleshoot connection issues via cable test, loop prevention, loop detection, broadcast storm controls.5-year manufacturer limited warranty

The Grandstream GWN7806P is a Layer 2+ managed switch engineered for small-to-medium business networks. It features 48 Gigabit Ethernet RJ45 ports with PoE/PoE+ support and 6 SFP+ uplinks, delivering up to 216Gbps switching capacity. Each port supports up to 30W, with a total PoE budget of 400W, managed via smart power control. The switch includes advanced reliability features like fault detection, dual boot, and link aggregation, along with robust security protocols such as ARP inspection, IP source guard, and DoS protection. With built-in QoS, stacking support for up to 16 switches, and management via GWN.Cloud or GWN Manager, the GWN7806P offers scalable, secure, and intelligent switching for modern enterprise networks..48 Gigabit RJ45 ports and Layer 2+ managed switching for enterprise networks..PoE/PoE+ with smart power control and 30W per port, totaling 400W..216Gbps switching capacity with 6 SFP+ uplinks for high-speed backbone..Mounts on desktop or rack with included installation accessories..Enables SNMP v1/v2c/v3 for remote diagnostics and network monitoring..Prioritizes traffic using advanced QoS with shaping, mapping, and scheduling..Secures networks with ARP inspection, IP guard, DoS protection, and port isolation..Operates with VLANs, link aggregation, and stacking support for up to 16 switches..Uses internal PSU with surge protection and efficient power allocation..Certified by FCC, CE, RCM, IC, and UKCA for global compliance and safety standards.

D-Link® 10-port Managed gigabit ethernet switch features 10 gigabit Ethernet technology and 10/100/1000base-T network technology respectively. Switch has 8000 MAC addresses database..PoE switch.Dimensions: 1.73"H x 11.02"W x 7.08"D.Compatible with PC.Comes in black/silver color.Interfaces: 8 x 10/100/1000BASE-T PoE, 2 x SFP.Media type supported: Twisted pair, optical fiber, twisted pair cable standard: Category 5e, Ethernet technology: Gigabit Ethernet.Layer supported: 3, PoE standard: IEEE 802.3af & IEEE 802.3at, PoE capable ports: Ports 1 to 8: Up to 30W.Form factor: Rack mountable, desktop, network cables: UTP Cat.5, Cat.5e (100m max), EIA/TIA-568 100-ohm STP, transmission method: Store-and-forward.Manageable, management: VLAN, QoS, MIB, Syslog, diagnostic LEDs: Power (per device), PoE Max (per device), link/activity/speed.Switching capacity: 40 Gbps, MAC address table: 16, 000 entries per device, packet forwarding rate: 14.88 Mpps, packet buffer memory: 1.5MB.IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX (Fast Ethernet), IEEE 802.3ab 1000BASE-T (Gigabit Ethernet), auto-negotiation.Security: Broadcast multicast/unicast storm control, D-Link safeguard engine, DHCP server screening.IP-MAC-Port binding (smart binding) - Supports 512 address binding entries, ARP inspection, ARP + IP inspection, supports DHCP Snooping.Power source: Power supply, input voltage: 120 - 230 VAC, PoE power budget: Max. 78 W.Operating temperature: 23 - 122 deg F, storage temperature: -4 to 158 deg F, humidity: 0 - 95 % non-condensing (operating/storage).Meets FCC Class A, CE Class A, ICES-003, VCCI Class A, C-Tick, BSMI, Safety, cUL, CE LVD, ENERGY STAR, WEEE standards.Weight: 3.1 lbs..D-Link® 10-port Managed gigabit ethernet switch is compatible with 1U rack unit and requires input voltage of 110/220 VAC.

Netgear 300 Plus switches with PoE meets business networks growing need by providing fundamental network features such as simplified VLANs, QoS set-up and IGMP Snooping that will help optimize the performance of business networks. Plus switches are the perfect upgrade from the plug-and-play unmanaged switch, delivering essential networking features at a very affordable price. These models support Power-Over-Ethernet (PoE) and can power devices such as VOIP phones, surveillance IP cameras, wireless access points and many other applications. These new PoE+ Gigabit Ethernet Plus switches models include uninterruptable PoE to help optimize the performance and troubleshooting of business networks. The new and improved business-friendly GUI allows easy management and simple configuration. With the growing deployment of applications and an all-in-one solution, providing management and power to these applications would be perfect..Managed switch delivers essential business networking features and powers PoE+ devices such as VoIP phones, IP cameras, and more.Contains 16 x 10/100/1000 RJ45 copper ports (auto uplink).Business-friendly and easy-to-use web browser-based management GUI.Dimensions: 1.06"H x 11.26"W x 4.02"D.Certifications and standards: Meets or exceeds CE mark, FCC Part 15 class B, CE/EN55032/24, VCCI, ACMA, CSA safety, KC, BSMI standards.Fanless design for silent operation makes this switch perfect for noise-sensitive environments.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.16 ports provide up to 1000Mbps of dedicated, non-blocking bandwidth each.10Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.15 PoE+ ports provide a total of 180W of power so you can power and connect your devices with a single wire.Manage PoE prioritization, PoE power limit per port, PoE scheduling, and more for simple control over all PoE-powered devices.Simple, yet useful network set-up on top of plug-and-play connectivity.Quality of Service (QoS) for traffic prioritization.Port mirroring for network monitoring.Rate limiting for better bandwidth allocation.Features auto "denial-of-service" (DoS) prevention, troubleshoot connection issues via cable test, loop prevention, loop detection, broadcast storm controls.5-year manufacturer limited warranty

The HP® Aruba 2930F 24-port PoE+ fixed port managed Gigabit Ethernet switch provides high-performance and resiliency for a digital workplace campus network. A powerful Aruba ProVision ASIC delivers performance and value, supporting the latest SDN applications with future proof programmability, as well as it supports 10GbE uplinks, PoE+, robust QoS and RIP routing. The switch provides better application experience with low latency and virtualization. The switch provides you an unmatched quality of service with trusted security that meets corporate policies and compliance requirements. The switch supports Aruba ClearPass policy manager for unified and consistent policy between wired and wireless users with simplified implementation and management for guest login, network access and other network policies..Fixed port managed gigabit Ethernet switch provides a reliable infrastructure for your business network.Dimensions: 4.39 cmH x 44.25 cmW x 30.42 cmD.Compatible with PC.Comes in black color.Memory: 1GB DDR3 SDRAM, buffer memory: 12.38MB 4.5MB Ingress/7.785 Egress, 4GB eMMC, processor: Dual Core ARM Coretex A9 at 1016 MHz.Interfaces/ports: 24 x RJ-45 autosensing 10/100/1000 PoE+ ports, 4 x SFP.Media type supported: Twisted pair, optic fiber, network technology: 10/100/1000Base-T, 1000Base-X.Layer supported: 3.Ethernet technology: Gigabit Ethernet.MAC address table: 32K entries.Throughput: Up to 41.7 Mpps, routing/switching capacity: 56 Gbps.Latency: 1000 Mbps latency: < 3.8 us.Management: Aruba AirWave network management, IMC - Intelligent Management Center, command-line interface, web browser, configuration menu.Power: 120 - 230 VAC 50/60 Hz redundant power supply, PoE capability: 370 W PoE+.Form factor: 1U rack-mountable, Desktop.Includes Aruba 2930F 24G PoE+ 4SFP switch, 1 x power cord, 1 x screw kit, 4 x mounting ears, 4 x bumper feet, 1 x cable tie.Meets FCC part 15 Class A, VCCI Class A, EN 55022 Class A, CISPR 22 Class A, EN 55024, EN 61000-3-2 2000, 61000-3-3, ICES-003 Class A, RoHS standards.Weight: 3.9 kg.Comes with limited lifetime warranty

The Zyxel GS1200-8HP managed 8-port Gigabit PoE+ desktop Ethernet switch in gray color, features switching capacity of 16 Gbps, MAC address of 4K and memory buffer of 192KB. It has a input voltage of 55 V, input current of 1.3 A and it consumes maximum power of 72 W..Managed Gigabit Ethernet switch.Has eight 10/100/1000 PoE+ ports.System management: VLAN, QoS, SNMP v1, 2, 3, RMON (1, 2, 3, 9), Syslog, MIB, web based management.Switching capacity: 10 Gbps.Dimensions: 1"H x 9.5"W x 4.1"D.Power consumption: 2.67 W (max), 60 W Power-over-Ethernet (PoE).Certifications and standards: RoHS Compliant.MAC address: 4K entries.Jumbo frames: 9KB.Buffer memory: 192KB.Color: Gray.Form factor: Desktop.Routing protocol: IGMP, IGMPv2, IGMPv3.Layer supported: 2.Power supply: 55 V, 1.3 A.Temperature: 32 to 104 deg F operating, -40 to 158 deg F storage.Humidity: 10 to 90% (non-condensing) operating and 10 to 90% (non-condensing) storage.Weight: 1.29 lbs..⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.8-port managed Ethernet switch features true web management, QoS and support for 802.3af and 802.3at PoE+ plus a user-friendly set-up interface.

The Grandstream GWN7813P is a high-performance Layer 3 managed switch designed for medium-to-large enterprise networks. Featuring 24 Gigabit Ethernet ports with PoE++ support and 4 10G SFP+ uplinks, it delivers up to 128Gbps switching capacity for seamless data flow. Smart power control enables dynamic PoE allocation per port, with a total budget of 360W and up to 60W per port. Advanced security features like ARP inspection, IP source guard, and DoS protection safeguard your network, while built-in QoS and ACL filtering optimize traffic prioritization. The GWN7813P supports IPv4/IPv6 routing, stacking, and is managed via Web GUI, CLI, SNMP, or Grandstream’s cloud platforms. Its versatile mounting options and robust design make it ideal for scalable, secure, and intelligent business deployments..24 Gigabit ports and Layer 3 managed switching for enterprise-grade control..Enables dynamic PoE++ allocation with up to 60W per port and 360W total power budget..Up to 128Gbps switching capacity and supports 4 high-speed 10G uplinks..Suitable for desktop, wall, or rack mounting with included installation accessories..Supports SNMP v1/v2c/v3 for remote monitoring and network diagnostics..Prioritizes traffic using advanced QoS with shaping, scheduling, and rate limiting..Secures networks with ARP inspection, IP guard, DoS defense, and port isolation..Operates with VLANs, link aggregation, and dynamic routing protocols like OSPF and BGP..Optimizes energy use with smart power control and efficient fan speed adjustment..Certified by FCC, CE, RCM, IC, and UKCA for global compliance and safety standards.

The DGS-1100 Series is a range of switches designed to meet the requirements of small, medium, and enterprise businesses. Support for multiple PoE standards make the DGS-1100 Series ideal for IP surveillance deployments. Advanced management features, a range of diagnostic and troubleshooting tools, and energy efficient technologies provide a flexible solution to meet your networking requirements..Number of Ethernet Ports 16, Network Management Type Managed.Network Technology: 10/100/1000Base-T.Ethernet Technology: Gigabit Ethernet.Switch Form Factor: Rack-mountable, Desktop.Wireless Connectivity: Not Applicable.Power Source: Power Supply.Media Type Supported: Twisted Pair.Limited Lifetime Warranty

Fast. Compact. Convenient.: The D-Link DGS-1005P 5-Port Desktop Gigabit PoE+ Switch enables you to connect Power over Ethernet (PoE) devices such as wireless access points (APs), network video cameras and IP phones to the network. Built with home and small business users in mind, the DGS-1005P is compact and operates silently, making it ideal for most rooms and offices.: Gigabit Performance. : The DGS-1005P features plug-and-play installation and requires no configuration.: Automatic MDI/MDI-X support on all ports removes the need for crossover cables when connecting to another switch, and auto-negotiation on each port intelligently adjusts the port speed for compatibility with the connected device. With wire-speed filtering and store-and-forward switching, the DGS-1005P maximises network performance while minimising the transmission of bad network packets. Power Over Ethernet+: The DGS-1005P features four Gigabit Ethernet ports that support the IEEE 802.3af and IEEE 802.3at PoE, supplying up to 30 W on each PoE port and providing a total power budget of 60 W.: You can connect compatible devices to the DGS-1005P without using an additional power supply. This allows you to save on cabling and power supplies and to install devices on locations without immediate access to power outlets. Green Technology: The DGS-1005P features green technology such as IEEE 802.3az Energy-Efficient Ethernet (EEE), link status detection, and cable length detection.: EEE adjusts the power consumption of the switch based on network utilisation, reducing energy use during periods of inactivity. Link status detection powers down unused ports, saving power when connected devices are shut down or disconnected. Cable length detection adjusts the power output of the port based on the cable length, reducing the power requirements of the switch. Compact and Silent: The compact design of the DGS-1005P allows placement in most locations, including those where space is at a premium.: The desktop form factor provides everything you need to set up a new network or expand an existing network, while the fanless design ensures silent operation even in noise-sensitive areas such as workstations and meeting rooms..Create your own LAN and connect your PC, laptop, printer and other peripherals with the help of 5 ports.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.Up to 10x faster than standard Ethernet server connectivity while providing high-performance uplinks.With leading Layer 2 support, experience enhanced convenience, secure business operations, and a borderless network experience.Managed switch provides a reliable foundation for your network

18312606ba85f9c38ee17cfae1fedfb7.Access Control Lists (ACLs).D-Link Safeguard Engine protects the CPU from broadcast/multicast/unicast flooding.Port Security supports up to 64 MAC addresses per port.ARP Spoofing Prevention.Smart IP-MAC-Port Binding.DHCP Server Screening.Web-based Graphical User Interface - Standard Mode or Surveillance Mode.D-Link Network Assistant Utility.Simplified CLI through Telnet.Built-in SNMP MIB for remote NMS (D-View 7.0)

All 5 ports support Auto-MDI/MDIX, eliminating the need to worry about what type of cable to use. Featuring full duplex mode, the device can process data at a rate of up to 2000Mbps, making it an ideal choice for expanding your high performance wired network. Moreover, with innovative energy-efficient technology, the TL-SG105 can save energy up to 65%..Support IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode.Support QoS (IEEE 802.1p).Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput.10Gbps Switching Capacity, 2K MAC address table, 9KB Jumbo Frame, 1MB Buffer Memory.Auto-MDI/MDIX eliminates the need for crossover cables.Support MAC address auto-learning and auto-aging.Auto-negotiation ports allow smart integration between 10Mbps, 100Mbps, and 1000Mbps devices.Fanless design to keep a quiet environment.Support 100-240V power supply.TP-LINK’s TL-SG105 provides an easy way to expand your wired network.

The EX4100-F-12P, which is a compact, fanless switch offering 12 x 1GbE Power over Ethernet Plus (PoE+) access ports and delivering up to 30W per port with a total of 180W of PoE power budget with an external power adapter. EX4100-F-12P can also be powered from an external 90W power sourcing equipment (PSE) device connected via the uplink port. Additional 90W of PoE budget is available if the second uplink port is connected to a PSE device. With external power adapter and the two uplink ports connected to 90W external PSE, total PoE power budget supported is up to 300W..Managed switch with 12 x 10/100/1000BASE-T PoE+, 2 x 100Mb/1GbE/2.5GbE/5GbE/10GbE uplinks, 4 x 10GbE stacking/uplink ports, with Standard SW ports.The EX4100-F-12P fanless switch offering 12 x 1GbE PoE+ access ports and delivering up to 30W per port with a total of 180W of PoE power budget with an external power adapter.Features 256Gbps switching capacity.Comes in 1 RU form factor.SNMP: v1, v2c, v3; RFC 1157 SNMPv1, RFC 2011 SNMPv2 for Internet Protocol using SMIv2, RFC 2012 SNMPv2 for transmission control protocol using SMIv2.Quality of Service (QoS): L2 QoS, L3 QoS, ingress policing: one rate two color, 12 hardware queues per port (eight unicast plus four multicast), Strict priority (SP) and weighted deficit round-robin (WDRR) scheduling methods (egress), 802.1p, (DSCP)/IP precedence trust and marking, L2-L4 classification criteria.Meets or exceeds the CAN/CSA-C22.2 No. 62368-1 and 60950-1, UL 62368-1 and 60950-1, IEC 62368-1 and 60950-1 (All country deviations): CB Scheme report, IEC 62368-3 for USB and PoE: CB Scheme report, CFR, Title 21, Chapter 1, Subchapter J, Part 1040, REDR c 1370 OR CAN/CSA-E 60825-1- Part 1, IEC 60825-1, IEC 60825-2, and TAA standards.Onboard (day 0), provision (day 1), and manage (day 2+) the EX4100-F from the cloud with Juniper Mist Wired Assurance, using AI-driven automation and insights to deliver improved experiences for IT staff, end users, and connected devices.Streamline IT operations, reduce mean time to repair, and deliver a new generation of wired and wireless networks; the EX4100-F provides rich streaming telemetry data for insights into switch health and wired service-level expectations (SLEs) for pre- and post-connection metrics.Scale with ease, build resiliency, and streamline management with Virtual Chassis and EVPN-VXLAN-based campus fabrics, which help to simplify configuring and maintaining multiple devices.Standards-based micro segmentation using group-based policies (GBP) leverages underlying VXLAN technology to provide agnostic endpoint access control for consistent security policies and granular control of application, business function, or user tags.Take segmentation to the next level by separating traffic within the same VLAN so IoT devices or users can traverse any port or switch within the network; maintain the same security policies without having to manually configure them each time.Enables per-flow level analytics, so you can monitor thousands of traffic flows per switch without impacting the CPU.Dimensions: 1.75"H x 10.59"W x 9.66"D.Lifetime manufacturer limited warranty

Create your own LAN and connect your PC, laptop, printer and other peripherals with the help of 4 ports..Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.Optimize the performance of business networks with 10 Gigabit Ethernet connectivity.Layer 2 switch provides a complete lineup of features including IGMP snooping, port mirroring, and spanning tree.Managed switch provides a reliable foundation for your network

Cisco Catalyst 9300 switches are stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. Cisco Catalyst 9300 switches form the foundational building block for Software-Defined Access (SD-Access). They are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. TCisco Catalyst 9300 is the first optimized platform for high-density Wi-Fi 6 and 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch..Stackable enterprise switching platform built for security, IoT, mobility, and cloud.Features 48-port 1G copper with fixed 4x10G SFP+ uplinks, PoE+ Network Advantage.Uses Encrypted Traffic Analytics (ETA), AES-256 MACsec encryption, IPSec encryption, Trust Anchor Technologies, and Umbrella DNS Integration.Dimensions: 1.73"H x 17.5"W x 17.7"D.Maximum power consumption: 715W; switching capacity: 176Gbps.Certifications and standards: Meets or exceeds UL 60950-1, CAN/CSA-C222.2 No. 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950.1, IEEE 802.3 standards.Accelerate changes with programmability, supporting open standards and APIs.Detect and stop threats, even with encrypted traffic.Simplified automation and assurance: goal-based policies are created once centrally, applied network-wide.Features x86 CPU complex with 8GB memory, and 16GB of flash and external USB 3.0 SSD pluggable storage slot (delivering up to 240GB of storage with an optional SSD drive) to host containers.High wireless scale for Wi-Fi 6 and 802.11ac Wave 2 access points supported on a single switch with select models.Lifetime manufacturer limited warranty

The SW-505-24P-F includes 24 1-Gigabit PoE+ Ethernet ports, two non-powered Ethernet ports, and two 1-Gigabit SFP expansion ports (SFP and non-powered ethernet ports cannot be used at the same time). Both 1 Gb SFP ports can be aggregated for a connection speed of up to 2 Gb. The 24 PoE+ ports deliver both gigabit data and power over a single cable to 802.11af/at compliant devices, with a maximum of 30W per port. For separately powered devices, these ports deliver network connectivity only. The total power budget is 250W for all PoE+ ports combined. The advanced Layer 2/Layer 3 features a refreshed easy-to-use management interface to simplify configuration and make this switch ideal for use in single-switch AVoIP environments. Setup of IGMP/Multicast on a per-port basis is easy, improving the setup and reliability of running audio and video over the network simultaneously. Watch Video: Meet our SW Series Managed PoE+ Switches.1Gb L2/L3 Managed Switch, 24 PoE+.Dante and AES67 compatibility, AV-over-IP compatible.Dimensions Height 1.75, Width 8.3, Length 17.4 in, Product Weight 6.6 lbs..Color Black, Material Metal.Selling Quantity 1.Refreshed, simplified user interface.Supports inbound (ingress) ACL filtering.Layer 2/Layer 3 capabilities (static routing included).Multicast/IGMP snooping and querying feature.Per port unregistered flooding.52Gbps switching capacity.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Aruba Instant On 1960 Switch Series includes four 10GbE connections to connect to servers, network storage devices, or to other switches. Each switch has a pull-out tag, known as a luggage tag, on the front panel of the switch. The tag includes a QR code that includes switch ID information (SKU number, SKU name, serial number, and MAC address) for easy switch onboarding through Instant On mobile app. The Aruba Instant On mobile app and cloud-based web portal make cloud-managed stacking easy — just follow the recommendations to stack up to four Aruba Instant On 1960 switches and manage as a single entity. The Aruba Instant On mobile app automatically detects members, making multiple stack members easy to setup and manage remotely. Automated configurations and streamlined workflows allow users to manage all stack members through one single dashboard without the need for device reboot. The Aruba Instant On 1960 Switch Series lets you use VLANs and Access Control Lists to set bounds on what data can be seen by which users. Leverage 802.1X with a RADIUS server to ensure only known and authorized users can access your network. Supports Automatic denial-of-service (DOS) monitors and protects the network against malicious attacks..Advanced 10G, smart-managed stackable switch designed for business networks and workgroups needing ultra-high performance..This model has 12 x RJ45 100/1000/10GBASE-T, 4 x SFP+ 10GbE ports.Use the Instant On mobile app, cloud-based web portal or the local web GU to quickly setup, monitor and manage the device.Throughput: 238 Mpps maximum; switching capacity: 320Gbps.Dimensions: 1.73"H x 17.42"W x 13.8"D.Power consumption at 100-127V: 130W maximum, 60W idle.Powered by single core ARMv7 Cortex-A9 2Ghz CPU.Lifetime manufacturer limited warranty