Metra Adapters

Complete your radio installation with Metra. This 1995 through 2010 Ford/Lincoln/Mercury/Mazda Double-DIN Multi Kit accommodates one double-DIN or two single-DIN radios. It features high-grade ABS plastic that is contoured and textured to complement the factory dash..Designed specifically for the installation of double-DIN radios or two single-DIN radios.High-grade ABS plastic contoured & textured to complement factory dash.All necessary hardware to install an aftermarket radio.Comprehensive instruction manual.Double-DIN unit provision.Stacked ISO mounts units provision.⚠ WARNING: Cancer https://p65WARNINGs.ca.gov

Keep your dash pristine after installing an aftermarket radio. This Metra installation kit allows easy mounting of your double-DIN radio in a 2001 through 2006 Ford Mustang, Explorer or Expedition. Finish the job right with Metra!.Designed specifically for the installation of double-DIN radios.High-grade ABS plastic.Contoured texture & painted to complement factory dash.Comprehensive instruction manual.2001–2004 Ford Mustang.2003–2006 Ford Expedition (without NAV).2002–2005 Ford Explorer.2003–2006 Lincoln Navigator.2003–2005 Lincoln Aviator.2002–2005 Mercury Mountaineer.Includes all necessary hardware to install an aftermarket radio, including rear support bracket.⚠ WARNING: Cancer https://p65WARNINGs.ca.gov

Keep your dash pristine after installing an aftermarket radio. This Metra ISO installation kit allows easy mounting of your new ISO double-DIN radio to select 2007 and up Chrysler/Jeep/Dodge/Mitsubishi/Ram/Volkswagen vehicles. Finish the job right with Metra!.Double-DIN radio provision.Stacked ISO-DIN radio provision.Includes all necessary hardware to install an aftermarket radio.⚠ WARNING: Cancer and Reproductive Harm https://www.p65WARNINGs.ca.gov

Do you install replacement speakers? The Metra Speaker Harnesses for Chrysler and Dodge will fit a wide variety of vehicles. So if you work on a lot of vehicles, keep plenty on hand..Chrysler/Dodge speaker harnesses.White..05 lbs..⚠ WARNING: Cancer and Reproductive Harm https://www.p65WARNINGs.ca.gov

Need to replace your antenna? The Metra Side/Top Mount Rubber Antenna for 1 in. Opening makes a great replacement antenna. This heavy-duty unit features a 14 in. rubber mast and a 54 in. cable..Side/top mount split ball for 1" opening.14" removable black conductive rubber mast with 54" cable.44-US07R/AW-US07R/CF-US07R/CK-US07R.⚠ WARNING: Cancer and Reproductive Harm https://www.p65WARNINGs.ca.gov

Keep your dash pristine after installing an aftermarket radio. This Metra 2005 through 2008 Dodge/Jeep/Chrysler Single- or Double-DIN Installation Multi Kit for Vehicles is for vehicles with factory navigation. Finish the job right with Metra!.Designed for vehicles with factory navigation radios.DIN radio provision with pocket.ISO-DIN radio provision with pocket.Double-DIN radio provision.Stacked ISO unit provision.Quick release, snap-in ISO mount system with a custom trim ring.High-grade ABS plastic.Includes all necessary hardware.⚠ WARNING: Cancer and Reproductive Harm https://www.p65WARNINGs.ca.gov

Tired of unsightly cords and cables ruining the sleek look of your wall-mounted TV? Say goodbye to the clutter with the Mount-It! wall-mounted TV cable concealer kit. It allows you to easily conceal and organize your cables, transforming the visual appeal of your entertainment space. No more distractions or eyesores, just a clean, seamless finish that complements your decor. Designed for versatility, this cable concealer kit is not limited to hiding cables underneath your TV. You can effortlessly route them along door frames and baseboards, maintaining a tidy appearance throughout your living space. The kit comes with 10 cable raceways and a variety of connectors, providing ample coverage for a sleek and discreet cable management solution. Customization is key, and raceways can be cut to the desired size to ensure a perfect fit for your unique setup. They are also paintable, allowing you to match them seamlessly with your existing decor. The comprehensive kit includes everything you need for a hassle-free installation. Made of high-quality, fire-retardant PVC..Stop looking at cords and cables dangling down from your wall-mounted TV, and start hiding them neatly with this cable concealer kit.Raceways fit two-three cables and can be cut to size and painted to blend in with your decor.Made of high-quality, fire-retardant PVC in white.Kit includes: 10 15.7" cable raceways, six flat 90-degree corners, interior 90-degree corner, exterior 90-degree corner, nine straight couplings, two T-fittings, 20 concrete anchors, and 20 lag screws.Easily conceal your cables and even route them along doorframes and baseboards.Meets or exceeds the UL-94 and V-0 standards

Tram-Browning Inc. offers quality workmanship and materials. Their products provide exceptional performance and function thanks to expert engineering. They are proud to offer the Scanner Trunk/Hole Mount Antenna Kit with BNC-Male Connector..Freq Ranges: 150MHz-174MHz VHF, 440MHz-490MHz Uhf, 800MHz-1,000MHz.18" Tall Black-finish Stainless Steel NMO Mounting Antenna With Gold Plunger-type Contact Pin.Solid Brass NMO Mount With Gold-plated Antenna Contact Pin & High-frequency Fully Enclosed, Fully Shielded, Fully Weatherized Zinc Die-cast Housing.17ft Low-loss RG58/U Coaxial Cable With BNC-male Connector Installed.Stainless Steel "l" Bracket With Black Finish For Trunk Groove Or Side Mounting.Can Be Mounted In 3/4" Hole

The Brainboxes MK-070 snap in DIN-rail clip kit allows the device to be mounted in a server rack or any DIN rail fitted equipment rack. This light weight snap on DIN rail kit is compatible with Brainboxes 4 & 8 port Ethernet to serial and USB to serial devices..Snap in DIN-rail clip kit suitable for mounting Brainboxes 4 and 8 port Ethernet to serial and 4 & 8 port USB to serial.Dimensions: 19 mm H x 43 mm W x 10 mm L.Aluminum construction.Simple installation.Light weight.Mounts enclosures to 35 mm and 32 mm wide DIN rails.Certifications and standards: Conforms to IEC International Standard 60715, conforms to European Standard EN 50022.Snap in DIN-rail clip kit suitable for mounting Brainboxes 4 and 8 port Ethernet to serial and 4 & 8 port USB to serial.

Slidemaster Placard Holder for Trucks meets Labelmaster's exacting standards for top quality construction. This slide-in placard holder features Easy-Off Ramp, an innovative device that glides placards over the retaining clip, so they slide in or out without a hitch. Built with rugged riveted assembly, drain hole and stainless steel clip, Slidemaster holders accommodate metal placards and non-adhesive placards in polycoated tagboard and 20-mil rigid vinyl. Full frame, Slidemaster Slide-In Placard Holder comes with baked-on white polyester finish on sturdy .032 aluminum..Top quality construction.Easy-Off Ramp, an innovative device that glides placards over the retaining clip.Slide-In Placard Holder comes with baked-on white polyester finish.White Slidemaster Placard Holder for Trucks

DIN Rail-Mounting Kit Compatible with Wide Range of Equipment :This 2U rack-mount DIN kit includes top hat, mini top hat and G-style rails, making it compliant with an array of DIN rail equipment, such as power supplies, bell transformers, terminal strips, programmable time switches and circuit breakers. The adjustable rails can be easily set back to match DIN rail equipment of any depth. Premium Construction Designed to Endure in Busy Rack Applications :The SRDINRAIL2U DIN rail-mounting kit is made from durable cold-rolled steel with a black powder-coated finish that blends seamlessly with your rack décor. It mounts into 2U of space in an EIA-standard 19-inch open frame rack or floor-standing rack enclosure. Rack-mounting hardware is included for quick installation right from the box. 2-Year Warranty and Environmentally Responsible Design: The SRDINRAIL2U comes with a 2-year warranty. It's manufactured in compliance with strict RoHS specifications, reflecting Tripp Lite's commitment to environmental responsibility..Ideal for DIN equipment, including power supplies, terminal strips and circuit breakers.Compatible with EIA-standard 19 in. open frame racks and floor rack enclosures.Durable cold-rolled steel construction designed to stand up to heavy use over time.Multi-directional reception pattern

The Omnitron® 1091-0 wall mounting bracket kit is suitable for use with miConverter tabletop models..Wall mounting bracket kit.Compatible with miConverter fiber media converters, miConverter tabletop models, miConverter 10/100 PLUS GX GX/T.Includes mounting brackets, fastening screws

The charging stand for Jabra Evolve2 85 provides easy and convenient charging and storage at your desk..Charging station allows multiple devices to charge simultaneously with ease.Compatible with most smartphones.Comes in black

Transform your vehicle into a mobile workstation with the Intermec VMHOLDER3K Vehicle Mount Kit, specifically designed for secure mounting of bar code scanners and tablets. This professional-grade mounting solution ensures your devices stay firmly in place while maintaining easy accessibility for maximum efficiency in mobile operations..Vehicle mount accessory that securely holds devices during transport or field operations, ensuring stability and easy access..Compatible with select Honeywell devices, including barcode scanners and tablets such as those in the Granit XP and RT10 series..Engineered for professional vehicle integration.Durable construction for long-term reliability.Optimized for mobile workforce efficiency

The charging stand for Jabra Evolve2 85 provides easy and convenient charging and storage at your desk..Charging station allows multiple devices to charge simultaneously with ease.Compatible with most smartphones.Comes in black

Slidemaster Placard Holder for Trucks meets Labelmaster's exacting standards for top quality construction. This slide-in placard holder features Easy-Off Ramp, an innovative device that glides placards over the retaining clip, so they slide in or out without a hitch. Built with rugged riveted assembly, drain hole and stainless steel clip, Slidemaster holders accommodate metal placards and non-adhesive placards in polycoated tagboard and 20-mil rigid vinyl. Split frame, Slidemaster Slide-In Placard Holder comes with baked-on white polyester finish on sturdy .032 aluminum. Split frame construction allows two parts of the Slidemaster frame to follow the action of 12" roll-up rear door panels without impediment. Split frame Slidemaster, DOT Placard System is priced per each..Built with rugged riveted assembly, drain hole and stainless steel clip.Split frame construction allows two parts of the Slidemaster frame to follow the action of 12" roll-up rear door panels without impediment.Split frame Slidemaster, DOT Placard System is priced per each..Slidemaster Placard Holder for Trucks meets Labelmaster's exacting standards for top quality construction.