Metra Speaker Adapters

Do you install replacement speakers? The Metra Speaker Harnesses for Chrysler and Dodge will fit a wide variety of vehicles. So if you work on a lot of vehicles, keep plenty on hand..Chrysler/Dodge speaker harnesses.White..05 lbs..⚠ WARNING: Cancer and Reproductive Harm https://www.p65warnings.ca.gov

Finish your aftermarket radio installation with a Metra amplified harness. It plugs into your car’s harness and works with the amplified speaker system. This amp integration/sub harness is compatible with select 2003 and up Fords, Lincolns and Mercurys..For amplified sound systems.Includes Ford, Lincoln & Mercury 2003-2005 turbowire & 8-pin harness with a pair of RCAs for the OE woofer(s).Gray.⚠ WARNING: Cancer and Reproductive Harm https://www.p65warnings.ca.gov

Keep your dash pristine after installing an aftermarket radio. This Metra installation kit allows easy mounting of your double-DIN radio in a 2001 through 2006 Ford Mustang, Explorer or Expedition. Finish the job right with Metra!.Designed specifically for the installation of double-DIN radios.High-grade ABS plastic.Contoured texture & painted to complement factory dash.Comprehensive instruction manual.2001–2004 Ford Mustang.2003–2006 Ford Expedition (without NAV).2002–2005 Ford Explorer.2003–2006 Lincoln Navigator.2003–2005 Lincoln Aviator.2002–2005 Mercury Mountaineer.Includes all necessary hardware to install an aftermarket radio, including rear support bracket.⚠ WARNING: Cancer https://p65warnings.ca.gov

Complete your radio installation with Metra. This 1995 through 2010 Ford/Lincoln/Mercury/Mazda Double-DIN Multi Kit accommodates one double-DIN or two single-DIN radios. It features high-grade ABS plastic that is contoured and textured to complement the factory dash..Designed specifically for the installation of double-DIN radios or two single-DIN radios.High-grade ABS plastic contoured & textured to complement factory dash.All necessary hardware to install an aftermarket radio.Comprehensive instruction manual.Double-DIN unit provision.Stacked ISO mounts units provision.⚠ WARNING: Cancer https://p65warnings.ca.gov

After your new install, ensure you don’t miss a minute of your favorite music or the best in news and talk radio. This Metra 2007 and Up Nissan Radio to Antenna Adapter ensures factory OEM and your new component communicate properly. Do the job right with Metra!.Nissan factory antenna cable to aftermarket radio.Black.0.03 lbs..⚠ WARNING: Cancer and Reproductive Harm https://www.p65warnings.ca.gov

Keep your dash pristine after installing an aftermarket radio. This Metra ISO installation kit allows easy mounting of your new ISO double-DIN radio to select 2007 and up Chrysler/Jeep/Dodge/Mitsubishi/Ram/Volkswagen vehicles. Finish the job right with Metra!.Double-DIN radio provision.Stacked ISO-DIN radio provision.Includes all necessary hardware to install an aftermarket radio.⚠ WARNING: Cancer and Reproductive Harm https://www.p65warnings.ca.gov

Finish your aftermarket radio installation with a Metra harness. This harness is compatible with 1987 and up Toyota vehicles. Do the job right with Metra!.Plugs into car harness at radio.Powers 4 speakers.White.⚠ WARNING: Cancer and Reproductive Harm https://www.p65warnings.ca.gov

Need to replace your antenna? The Metra Side/Top Mount Rubber Antenna for 1 in. Opening makes a great replacement antenna. This heavy-duty unit features a 14 in. rubber mast and a 54 in. cable..Side/top mount split ball for 1" opening.14" removable black conductive rubber mast with 54" cable.44-US07R/AW-US07R/CF-US07R/CK-US07R.⚠ WARNING: Cancer and Reproductive Harm https://www.p65warnings.ca.gov

Keep your dash pristine after installing an aftermarket radio. The Metra 2007 and Up Chrysler Single-DIN/ISO-DIN with Pocket Multi Kit fits a wide variety of name plates including Jeep, Mitsubishi and Dodge. Finish the job right with Metra!.Quick release, snap-in, ISO mount system with a custom trim ring.DIN radio provision with pocket.ISO-DIN radio provision with pocket.Contoured & textured to match factory dash.Includes all necessary hardware.⚠ WARNING: Cancer https://p65warnings.ca.gov

Keep your dash pristine after installing an aftermarket radio. This Metra installation kit allows easy mounting of your double-DIN radio or two single-DIN radios in a 2000 and up Toyota Scion. Finish the job right with Metra!.Designed specifically for the installation of double-DIN radios or 2 single-DIN radios.Contoured & textured to complement factory dash.Includes all necessary hardware.⚠ WARNING: Cancer https://p65warnings.ca.gov

Keep your dash pristine after installing an aftermarket radio. This Metra single-DIN/double-DIN multi kit allows easy mounting of your new radio into select 1990 through 2012 GM/Isuzu/Suzuki vehicles. Finish the job right with Metra!.Provides pocket with recessed mounting of a DIN radio or an ISO-DIN radio using ISO quick-release brackets.Allows double-DIN or 2 ISO stacked radios to be mounted with included brackets.Single-DIN head unit provision with pocket.ISO-DIN head unit provisions with pocket.Double-DIN head unit provision.Includes all necessary hardware for easy installation.⚠ WARNING: Cancer and Reproductive Harm https://www.p65warnings.ca.gov

After your new install, ensure you don’t miss a minute of your favorite music or the best in news and talk radio. This Metra European FAKRA Antenna Adapter, Single Connector, ensures factory OEM and your new component communicate properly. Do the job right with Metra!.European antenna adapter single connector (FAKRA).For dual connector applications use the 40-EU56.Black.⚠ WARNING: Cancer and Reproductive Harm https://www.p65warnings.ca.gov

Keep your dash pristine after installing an aftermarket radio. This Metra 2005 through 2008 Dodge/Jeep/Chrysler Single- or Double-DIN Installation Multi Kit for Vehicles is for vehicles with factory navigation. Finish the job right with Metra!.Designed for vehicles with factory navigation radios.DIN radio provision with pocket.ISO-DIN radio provision with pocket.Double-DIN radio provision.Stacked ISO unit provision.Quick release, snap-in ISO mount system with a custom trim ring.High-grade ABS plastic.Includes all necessary hardware.⚠ WARNING: Cancer and Reproductive Harm https://www.p65warnings.ca.gov

The Dayton Audio® Micro-Edge™ ME650C is the ideal "L/C/R/S speaker solution" for ceiling-mounted home theater systems and offers spectacular performance for ceiling-mounted music systems. Unlike conventional in-ceiling speakers which fire straight down, the ME650C has a specially designed 15° angled baffle that enables it to direct sound precisely toward the listening area, even when it’s installed off-axis of the listener’s position. This enables a more focused soundstage with significantly enhanced cinematic imaging and lifelike sound reproduction when used in front, center channel, or surround speaker applications. The 1-in. pivoting silk dome tweeter allows adjustment for customizing the soundstage and reproduces crystal clear highs that rival more expensive esoteric loudspeakers. This in-ceiling speaker includes a heavy-duty long-throw 6-1/2-in. aramid woofer with rubber surround to deliver tight, accurate bass and a contemporary magnetic grille with an ultra-slim Micro-Edge™ frame that almost vanishes into the ceiling. From the softest whispers to the highest impact sound effects, enjoy sound as movie directors intended!.Power handling: 70 watts max, 35 watts RMS; impedance: 8 ohms.Frequency response: 50 Hz to 20 kHz; sensitivity: 88 dB 1W/1m (?3 dB).Ideal L/C/R/S speaker solution for ceiling-mounted home theater systems and ceiling-mounted music systems.15? angle design directs sound precisely towards the listening area enabling a more focused soundstage with significantly enhanced cinematic imaging and lifelike sound reproduction; angled baffle allows for placement within 1 ft. of a wall without compromising sound quality, unlike conventional in-ceiling speakers.6-1/2-in. long-throw woofer with rubber surround made with DuPont Kevlar delivers accurate reproduction of mid/low frequencies with tight, clean bass.Pivoting 1-in. silk dome tweeter allows adjustment for customizing the soundstage while reproducing crystal clear highs that rival more expensive esoteric loudspeakers.12-dB/octave optimized crossover with exclusive tuning by Dayton Audio.Compatible with a wide range of amplifiers and receivers, including Dolby Atmos.Contemporary, almost-invisible Micro-Edge grille design with magnetic grille retention; paintable grille matches any decor.Dimensions: 9-7/8 in. x 9-7/8 in. x 5-5/8 in. D.Cutout hole size: 8-1/4 in..5-year limited warranty.Includes installation paint masking template.DuPont and Kevlar are trademarks or registered trademarks of E.I. du Pont de Nemours and Company

When installing audio in a confined space such as a kitchen, bathroom, or hallway, you might be tempted to use a single conventional in-ceiling speaker connected to 1 amplifier channel. But you’d be missing half the music. The Dayton Audio® ME652C Micro-Edge™ series 2-channel stereo ceiling speaker makes it possible to preserve both channels of an audio source for the complete musical experience with rich tone and excellent sonic detail. With separate inputs for both left and right channels, the ME652C is an ideal choice for rooms that can’t fit 2 speakers, or those looking for Hi-Fi stereo sound on a budget. The compact size enables it to be installed virtually anywhere, and the low-profile perforated magnetic grille with ultra-slim Micro-Edge™ frame almost disappears into the ceiling. The speaker's 6-1/2-in. heavy-duty, long-throw aramid woofer and dual 1-in. silk dome tweeters deliver extended bass output with mid and high notes rich in detailed clarity..Power handling: 70 watts max, 35 watts RMS; impedance: 8 ohms.Frequency response: 50 Hz to 20 kHz; sensitivity: 88 dB 1W/1m (?3 dB).Dual channel speaker provides both left and right channels enabling high-quality stereo sound from a single speaker.For use in rooms with limited space where stereo speaker placement is difficult such as hallways, walk-in closets, and bathrooms, or those looking for Hi-Fi stereo sound on a budget.6-1/2-in. heavy-duty long-throw woven woofer with rubber surround made with DuPont Kevlar enables accurate reproduction of low frequencies with tight, clean bass output.Dual coaxially mounted 1-in. silk dome tweeters for single-point stereo use provide rich, detailed clarity.Dual 12-dB/octave optimized crossovers with exclusive tuning by Dayton Audio.Contemporary, almost-invisible Micro-Edge grille design with magnetic grille retention.Paintable grille matches any decor.Dimensions: 9-3/4 in. x 9-3/4 in. x 4 in. D.Cutout hole size: 8-1/4 in..5-year limited warranty.Includes speaker installation template.DuPont and Kevlar are trademarks or registered trademarks of E.I. du Pont de Nemours and Company

The Dayton Audio Micro-Edge in-wall series speakers combine sophisticated, minimalist styling with robust acoustical engineering and design features, for outstanding home theater and musical performance. The ME525MTM model uses dual 5-1/4-in. woofers made with woven aramid fiber and a centrally mounted pivoting silk-dome tweeter. The result is a speaker with symmetrical dispersion that can be mounted vertically as a left/right/surround channel speaker, or horizontally under a TV as a center-channel speaker. The pivoting tweeter mount lets you target the best treble performance directly at the listening position, and the 3-position room integration switch lets you decrease treble output if desired, for the best balance with your room's natural acoustics. The ME525MTM is sized to fit between studs in standard 16-in. stud spacing when mounted horizontally as a center channel speaker. All Dayton Audio? Micro-Edge? (ME-Series) speakers are timbre-matched for a seamless and consistent home theater experience when used together..Power handling: 100 watts max, 50 watts RMS; impedance: 8 ohms.Frequency response: 60 Hz to 20 kHz; sensitivity: 86 dB 1W/1m (?3 dB).Versatile all-purpose Left/Center/Right/Surround 2-way in-wall speaker for home theater or music; mounts vertically or horizontally.Dual 5-1/4-in. long-throw cone woofers are made with DuPont Kevlar fiber and 1-in. pivoting silk dome tweeter provides crisp vocal clarity with impactful bass.Room integration switch with selectable 0/-3/-6 dB treble adjustment.Optimized 12 dB/octave crossover with exclusive tuning by Dayton Audio.Contemporary low-profile removable steel mesh magnetic grille with ultra-slim Micro-Edge frame.Dimensions: 7-1/2 in. H x 14-3/4 in. W x 2-7/8 in. D.Cutout size: 6-1/8 in. x 13-3/8 in.; sized to fit between studs in standard 16-in. stud spacing when mounted horizontally as a center channel speaker.5-year limited warranty.Includes installation cutout template.DuPont and Kevlar are trademarks or registered trademarks of E.I. du Pont de Nemours and Company