Mini Fiber Media Converters

Omnitron Systems FlexPoint GX/T 2-Port fiber media converter has RJ45 ST multimode connector to connect variety of devices. Converter has coarse wave division multiplexing technology to enhance the bandwidth of fiber..Interfaces/ports: 1 x Network (RJ-45), 1 x ST duplex port.Media type supported: Twisted pair, optical fiber, Fiber mode supported: Multi-mode, Fiber optic wavelength: 850 nm, Maximum distance supported: 1804.46'.Communication: Ethernet, Fast Ethernet, Gigabit Ethernet technology, Network technology: 10/100/1000Base-T, 1000Base-SX.Input voltage: 120 VAC.Cable types: Copper: EIA/TIA 568A/B, Cat 5 UTP and higher, Fiber: Multimode: 50/125micrometer, 62.5/125micrometer, single-mode: 9/125micrometer, Frame size: Up to 10240 bytes.Frame size: Up to 10240 bytes.Form factor: Rack-mountable, desktop, external, wall mountable.Dimensions: 1"H x 3"W x 4"D.Temperature: 0 - 50 deg C (commercial), -40 - 60 deg C (wide), -40 - 80 deg C (storage), Humidity: 5 - 95% (non-condensing), Altitude: -100 - 4000 m.Fiber port supports multimode and single-mode fiber with ST and SC connectors and single-fiber with SC connectors, User-selectable link modes for quick fault detection.Provides remote fault Indicators to signal loss of link for far-end fault and link fault conditions, Loopback mode supports end-to-end testing.Diagnostic and DIP-switch configurations are displayed with status LEDs for quick and easy installation.Includes FlexPoint GX/T ST multimode 550m US AC powered, US power supply - 120 V/60 Hz, user manual.Certifications and standards: EIA/TIA 568A/B, Compliance: UL, CE, FCC Class A, IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3z 1000BASE-X, IEEE 802.3ab 1000BASE-T, RoHS, WEEE.Weight: 6 oz..Warranty: Lifetime limited.Omnitron Systems FlexPoint GX/T 2-Port fiber media converter has gigabit ethernet technology to offer superior ethernet frame transfer.

The Transition Networks® M/E-PSW-FX-02-NA mini fast Ethernet transceiver/media converter offers entry-level media conversion of 10/100Base-TX to 100Base-FX covering 2 km over MM(ST) at 1300 nm. This media converter offers easy deployment with its fixed configuration. The plug-and-play convenience helps you in expanding your network connections. This converter features auto-negotiation, auto-MDI/MDIX and automatic link restoration. The unit and port LED allows you to access the network status information..Dimensions: 0.85"H x 1.8"W x 3.3"D.Interfaces/ports: 1 x 10/100Base-TX (RJ-45), 1 x 100Base-FX.Media type supported: Multimode fixed full-duplex on fiber.Ethernet technology: Fast Ethernet.Data transfer rate: 100 Mbps, Wavelength: 1300 nm.Maximum transfer distance: 100 m/2 km.Form factor: Wall mountable, external.Wired connectivity.Temperature: 0 to 50 deg C (operating), -15 to 65 deg C (storage), humidity: 5 to 95 % (non-condensing).DC input: 12 VDC, power consumption: 2.6 W.Unit and port LEDs allow for quick status information, connect to legacy network equipment.Auto-negotiation, auto-MDI/MDIX.Automatic link restoration, far-end-fault (FEF), eliminate collision domains.Meets UL Listed, cUL Listed (Canada), FCC Class A, CISPR22/EN55022, Class A, EN55024, CE Mark standards.Weight: 2 lbs..Comes with lifetime warranty

Startech.com® Fiber to Ethernet media converter supports a maximum multimode fiber optic cable distance of 2 km. Converter provides a simple solution for connecting 10Base-T/100Base-Tx Ethernet networks to remote locations..Interface/ports: 1 x RJ-45 female, 1 x fiber-optic SC female.Dimensions: 0.8"(H) x 3"(W) x 3.7"(L).Compatibility: PC.Connectivity technology: Wired.Form factor: External.Black.Fiber optic mode: Multi-mode, half/full-duplex.Max transfer distance: 2 km (1.2 mi).Data transfer rate: 10/100Mbps.Indicators: 1xethernet link and activity (ON ethernet link OK, blinking activity on ethernet link), 1xFEF [far-end fault](on fault detected, off no fault, 1 x fiber link and activity (on fiber link OK, blinking activity on fiber link).Environment conditions: Operating temperature: 0 - 50 deg C, Storage temperature: -10 - 70 deg C, Humidity: 10 - 90% RH.Input voltage: 115 AC.Output voltage: 12 DC, output current: 0.2A.Center tip polarity: Positive.Includes 1 x media converter, 1 x power adapter, 1 x user's manual.Certifications and standards: RoHS.Weight: 3.2 oz..Warranty: 2 years limited.Startech.com® Fiber to Ethernet media converter creates an economical, cost-effective Ethernet-fiber link and fully complies with applicable IEEE 802.3 standards.

The Transition Networks® M/GE-PSW-SFP-01-NA mini GbE media converter provides cost-effective and entry level media conversion of 10/100/1000Base-T stand alone copper connection to 1000Base-X fiber connections. This hot swappable media converter has dual speed SFP port that supports autosensing 100 m or 1000 m SFP transceivers. The LEDs of the converter provide quick status information. This converter features auto-negotiation, auto-MDI/MDIX, automatic link restoration and fixed full duplex on fiber..Media converter provides cost-effective and entry level media conversion.Dimensions: 0.85"H x 1.8"W x 3.3"D.Comes in black color.Interfaces/ports: 1 x 10/100/1000Base-T RJ-45 to 100/1000Base-X SFP slot.Ethernet technology: Gigabit Ethernet.Power supply: Input: 4.5 VDC - 14 VDC, external AC/DC required, 12 VDC, 0.5 A, consumption: 2.4 W.Status LEDs: PWR (power) below RJ-45: On = Power, FX-link/act upper Left on RJ-45: On = link, TX-link/act upper right on RJ-45: On = link.Auto-negotiation, fixed full-duplex on fiber, auto-MDI/MDIX.Automatic link restoration, jumbo frame up to 10240 bytes.Temperature: 0 - 50 deg C operating, -15 - 65 deg C storage, humidity: 5 - 95% (non-condensing).Meets safety: Wall mount power supply, UL, cUL (Canada), FCC class A, CISPR22/EN55022 class A, EN55024, CE Mark standards.Weight: 2 lbs..Comes with lifetime warranty.Mini gigabit Ethernet media converter provides a cost-effective method for integrating fiber optic cabling into a 10/100/1000 UTP environment.

The Transition Networks M/GE-ISW series is a hardened Gigabit Ethernet mini media converter that provides cost-effective media conversion between 10/100/1000Base-T RJ-45 port and 100/1000Base-X open SFP slot for hardened or outdoor environments. With its supported operating temperature range of -40 degree Celcius to +75 degree Celcius, the mini converter offers a space-saving alternative for converting copper to fiber in extreme environments..Mini Gigabit Ethernet media converter provides simple and cost-effective integration of copper and fiber equipment.Dimensions: 0.85"H x 1.8"W x 3.3"D.Comes in black.Interfaces: 1 x RJ-45 10/100/1000Base-T, 1 x SFP 100/1000Base-X.Features auto MDI/MDIX, copper and fiber auto-negotiation.Supports fixed full-duplex operation on the fiber port.Offers jumbo frame (up to 10240 bytes) support and active link pass-through for reliable data transfer.Unit and port LEDs allow for quick status information.Supports DC and AC input power via terminal block.Provides overload current and reverse polarity protection.Can be mounted with an included DIN rail clip and Velcro or wall mount bracket (sold separately).Meets or exceeds FCC Class A standard.Lifetime manufacturer limited warranty

Tripp Lite media converter extends your copper Gigabit Ethernet network connection up to 1804 ft. over LC fiber optic cable with the addition of PoE. Because Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N785-P01-LC-MM1 with multimode fiber cable to reach greater distances. This could include providing both data and power to PoE and PoE+ devices, such as security cameras, VoIP telephones, point-of-sale kiosks and access control devices..Gigabit multimode fiber to Ethernet media converter.Dimensions: 0.98"H x 3.74"W x 2.76"D.Comes in black.Extends power (48VDC) and data (1Gbps) to any edge PoE+ device.Supports multimode fiber optic cable with LC connectors up to 1804'.RJ45 jack supports auto-MDI/MDIZ to bridge various network devices.Supports both full- and half-duplex operation.Works in tandem with Tripp Lite N785-001-LC-MM (sold separately).Compact metal converter is easy to install and set up with no software or drivers required.Included power supply connects to AC outlets with no computer or other signal source needed.Package includes: media converter, external power supply with 3.6' cord and NEMA 5-15P plug (input: 100-240V, 50/60Hz, 1.5A; output: 48V, 1.25A), and owner's manual.2-year manufacturer limited warranty

The Transition Networks® SGFEB1013-130-NA Ethernet media converter offers data rates up to 10/100/1000 Mbps on copper and 1000 Mbps on fiber ports. It integrates 1000Base-SX/LX fiber into a 10/100/1000Base-T copper to extend the network distance longer. This Ethernet media converter features AutoCross™ and Link Pass through technology. While the twisted pair ports on converter automatically detect the correct MDI or MDI-X configuration and monitors the loss of signal in fiber and copper ports..Media converter is an integration and conversion solutions for half and full-duplex environments.Dimensions: 1"H x 3.3"W x 4.8"D.Comes in black color.Interface: One RJ-45, one female SC.Fiber mode: Multi-mode fiber (MMF).Supports data transfer rate up to 1 Gbps and features diltering addresses of 8K entries.Connectivity technology: Wired, Operating distance: 721.78'.Wavelength: 850 nm, Indicators: Link/activity, port duplex mode, port transmission speed, power.Supports 50/125um, 62.5/125um standard optical fiber/twisted pair media for data transmission using Gigabit Ethernet technology.Power: 2.2 W consumption, Form Factor: Desktop, rack-mountable, rail-mountable, wall mountable.Features indicators for auto-negotiation, AutoCross, built-in DIP switch, energy efficient Ethernet, far end fault and half duplex mode.Offers jumbo frames support and link pass-through for reliable data transfer.Secures data from external sources of noise and interference and improves network performance.Meets RoHS and WEEE standards.Weight: 8.8 oz..Comes with lifetime warranty

Tripp Lite media converter lets you extend your copper Gigabit Ethernet network connection up to 12.4 miles over fiber optic cable. Because Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N785-INT-SC-SM with single mode fiber cable to reach greater distances. This could include providing network connectivity to employees in a secluded area of a facility, college or branch office or connecting multiple office workstations to a switch located in a separate building..Gigabit single-mode fiber to Ethernet media converter.Dimensions: 1"H x 3.7"W x 2.76"D.Comes in black.Extends your copper Gigabit Ethernet network past the standard 328' limit.Supports single-mode fiber optic cable with SC connectors.RJ45 jack supports auto-MDI/MDIZ to bridge various network devices.Supports both full- and half-duplex operation.Compact metal converter is easy to install and set up with no software or drivers required.Package includes: media converter, four international plug adapters (North America, UK, Europe, Australia), international power supply (input: 100-240V), and owner's manual.2-year manufacturer limited warranty

The Transition Networks® SBFTF1013-105-NA 2-port RJ-45 to SC standalone fast Ethernet media/rate converter extends network distance up to 120 Km. It features auto-negotiation for automatic configuration to achieve the best mode of operation over a link and AutoCross™ that automatically detects/configures the twisted pair port to the correct MDI or MDI-X configuration. It supports link pass-through and far end fault for efficient troubleshooting..Stand-alone media/rate converter allows users to integrate fiber optic cabling into 10/100Base-TX copper environments.Dimensions: 1"H x 3.25"W x 4.8"D.Suitable for use with PC.Comes in black color.Interfaces/ports: One 10Base-T or 100Base-TX RJ-45, one multi mode SC.Power supply: External AC/DC, 12 VDC, 0.8 A min.LEDs: PWR (power), FD (fiber duplex), LNK/ACT, CD (copper duplex).Data rates: 10 Mbps, 100 Mbps (layer 2).IEEE standards: IEEE 802.3, Switches: Auto-negotiation on/off, half or full-duplex with auto-negotiation off, 10/100 Mbps with auto-negotiation off.Packet size: 2044 bytes untagged, 2048 bytes tagged, RAM buffer: 512KB.Maximum distance supported: 1.24 mile.Features auto-MDI/MDIX, auto-negotiation, link pass through and far-end-fault (FEF) detection.Temperature: 0 - 50 deg C operating, Humidity: 5 - 90 percent non-condensing.Meets UL, FCC Class A, VCCI Class 1, CISPR22/EN55022, Class A, EN55024, EN61000, CE Mark certifications and standards.Weight: 2 lbs..Comes with lifetime warranty

The SGFEB provides a cost effective method for integrating 1000Base-SX/LX fiber into a 10/100/1000Base-T copper environment.  Deploying fiber into today's networks provides the ability to transmit data over significantly longer distances than is possible on copper.  Fiber also protects your data from external sources of noise and interference, improving network performance..Total Number of Ports: 2.Network (RJ-45): Yes.DVI: No

The StarTech MCM1110 Gigabit Ethernet fiber media converter has a compact standalone design and wall mounting option to provide easy and worry-free installation. This converter features a durable metal housing that delivers superior performance. Plug-and-play installation helps for a hassle-free setup. Its compact, lightweight design fits nicely into any carrying case that lets you carry wherever you go. This media converter converts a copper RJ45 Ethernet connection to Gigabit fiber to extend your network over longer distances..Gigabit ethernet fiber media converter converts a copper RJ45 Ethernet connection to Gigabit fiber to extend your network over longer distances.Dimensions: 1"H x 2.8"W x 3.7"L.Compatible with networks 10/100/1000 Mbps.Brown steel enclosure for durability.Maximum data transfer rate: 1 Gbps, MTBF: > 50000 hours at 25 deg C, Fiber type: Multi mode, single mode, Fiber operating mode: Full-duplex.Has one RJ-45 female and one SFP slot female connector.LED indicators: 1 x power, 1 x fiber port link/act, 1 x copper port link/act, 1 x 1000 Mbps.Power: 1 A input current, 100 - 240 VAC input voltage, 2 A output current, 5 VDC output voltage, Plug type: N, Power consumption: 5 W max.Form factor: Desktop/wall mountable.Temperature: 32 - 122 deg F operating, 14 - 158 deg F storage, Humidity: 5 - 95% RH (non-condensing).10/100/1000 Mbps compatible RJ45 port supports auto negotiation to bridge different network speeds and devices to a Gigabit fiber network.Compact standalone design and wall mounting option offers easy and convenient installation.Converter offers a powerful networking solution for campuses, businesses, government facilities, stadiums, or other areas requiring network access.Supports Auto MDIX and 9K jumbo frame.Gigabit Open SFP slot to customize the network extension distance to your requirements with virtually any MSA-compliant multi/single mode transceiver.Contains universal power adapter (NA/EU/UK/AU).Meets IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3z 1000BASE-SX certification and standards.Weight: 6.5 oz..Comes with 2 years limited warranty.The StarTech Gigabit Ethernet fiber media converter with open SFP slot offers connectivity to users in an isolated area of a large complex or in a separate building.

This media converter by Tripp Lite converts a single-mode or multimode fiber optical signal to a copper Ethernet signal that extends both power (48 VDC) and 10/100/1000 Mbps Gigabit Ethernet to a PoE+ (Power over Ethernet) device. Because Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N785-P01-SFP with fiber cable to reach greater distances. This could include providing both data and power to PoE and PoE+ devices, such as security cameras, VoIP telephones, point-of-sale kiosks, and access control devices..Customizable media converter extends power and data to a PoE+ device via fiber cable.Dimensions: 0.98"H x 3.74"W x 2.76"D.Network compatibility: 10/100/1000 Mbps Gigabit Ethernet network.Features a compact black metal housing.PoE saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device.Supports auto-sensing of network speed and other advanced functions, such as automatic network speed sensing, full/half-duplex auto-detection and automatic MDI/MDI-X configuration.Supports both full- and half-duplex operation.Customizable SFP port supports both 1G single- and multimode transceivers.RJ45 jack supports auto MDI/MDI-X to bridge various network devices.Six LEDs indicate the converter's power, PoE, Ethernet network, and fiber link statuses at a glance.Completely plug-and-play with no additional software required for connection.The included power supply connects to a convenient AC outlet with no computer or other signal source needed.Works in tandem with Tripp Lite N785-Series non-PoE converters (sold separately).Pack includes: media converter, external power supply with 3.6' cord and NEMA 5-15P plug (input: 100-240V, 50/60 Hz, 1.5A; output: 48V 1.25A), and owner's manual.Meets or exceeds FCC and RoHS standards.2-year manufacturer limited warranty

The StarTech MCM1110MMLC brown 1 Gbps Gigabit Ethernet fiber media converter offers a powerful extended networking solution for campuses, businesses, government facilities, stadiums, or other areas requiring network access. This converter features a durable metal housing that delivers superior performance. Plug-and-play installation helps for a hassle-free setup. Its compact, lightweight design fits nicely into any carrying case, so you can transport it wherever you go. This media converter converts a copper RJ45 Ethernet connection to Gigabit fiber to extend your network over longer distances..Media converter converts a copper RJ45 Ethernet connection to Gigabit fiber to extend your network over longer distances.Dimensions: 1"H x 8.1"W x 2.8"D.Compatible with campuses, businesses, government facilities, stadiums, or other areas requiring network access.Brown steel enclosure for durability.Has one RJ-45 female and one fiber optic LC duplex female port.Media type supported: optical fiber, twisted pair; fiber mode supported: multi-mode.Network technology: 10/100/1000Base-TX, 1000Base-LX, 1000Base-SX.Provide connectivity for desktop; wall mounting ensures properly centered installation.Data transfer rate: 1 Gbps; fiber optic wavelength: 850 nm; maximum distance supported: 1804.46'; power source: AC adapter; jumbo frame support: 9K.MTBF: > 50000 hours at 25 degrees Celsius.Input/output current: 1 A/2 A; input/output voltage: 100 - 240 VAC/5 VDC; power consumption: 5 W; plug type: N.LED indicators: power, fiber port link/act, copper port link/act, 1000 Mbps.Environmental conditions: 32-122 degrees F; 14-158 degrees F storage; 5-95% RH (non-condensing) humidity.Compact standalone design & wall mounting option for convenient installation; link fault pass (LFP) supported.Contains universal power adapter (NA/EU/UK/AU).Meets RoHS, FCC and CE certifications and standards.Weight: 7.1 oz..2 year warranty.The StarTech brown 1 Gbps Gigabit Ethernet fiber media converter offers connectivity to users in an isolated area of a large complex or in a separate building.

The Transition Networks® SGFEB1040-130-NA 1-port RJ-45 to SFP standalone fast Ethernet media/rate converter features auto negotiation, autocross, link pass through, far end fault and remote fault detect for efficient troubleshooting. It supports multimode or single mode fiber and IEEE802.3az Ethernet. This converter offers data rate of 10/100/1000 Mbps for copper and 1000 Mbps for fiber..Stand-alone media/rate converter is a cost effective method for integrating 1000Base-SX/LX fiber into a 10/100/1000Base-T copper environment.Dimensions: 1"H x 3.25"W x 4.8"D.Suitable for use with PC.Comes in black color.Interfaces/ports: One 10/100/1000Base-T RJ-45, one 100/1000Base-X SFP slot.Power supply: 7.5 - 24 VDC, provided by wide input AC wall mount adapter, Consumption: 2.2 W.LEDs: PWR (power), LACT (fiber link/activity), RJ-45 upper left (green/amber), RJ-45 upper right (speed).Data rates: 10/100/1000 Mbps (copper), 1000Mbps, 100Mbps also supported via SFP port (fiber).Form factor: Rack-mountable, wall mountable, rail-mountable, desktop.IEEE standards: IEEE 802.3, 802.3ab, 802.3u, 802.3z, 802.3az, Switches: Auto-negotiation enable/disable, link pass through enable/disable.Frame size: 10260 byte jumbo frames, RAM buffer: 512KB, MAC addresses: 8K.Features auto-MDI/MDIX, auto-negotiation, link pass through, far-end-fault (FEF) detection and remote fault detect.Temperature: 0 - 50 deg C operating, -15 - 65 deg C storage, Humidity: 5 - 95 percent non-condensing.Meets EN55022 Class A, EN55024, FCC Class A, CE Mark, UL, UL60950, CSA certifications and standards.Weight: 2 lbs..Comes with lifetime warranty

The S4110 is a stand-alone fiber to fiber media converter. It is protocol independent and supports data rates from 1Gbps to 11.5Gbps through two open SFP+ slots. This allows network managers to customize the S4110 with a pair of SFP+ modules to meet their network requirements. The open SFP+ ports support a wide variety of Transition Networks 10GE SFP+ fiber modules. This any-rate to same- rate converter can be used to perform reliable and cost-effective single mode to multimode conversion or it can be used to provide wavelength conversion in CWDM applications..Fiber to fiber repeater.Supports data rates from 1Gbps to 11.5Gbps.Support any-rate to same-rate.Up to 100,000:1 contrast ratio

Tripp Lite N785-001-SC-MM SC Multimode media converter automatically detects and selects full or half duplex mode. Supports auto-negotiation with MDI/MDI-X configuration for delivering superior signal quality and helps in controlling the network efficiently. Comes with LEDs for monitoring the performance of the connected components. With small and compact design, this converter ensures flexible installation at the point where power outlet is available..Media converter for connecting disparate cable types in the network.Measures 1" x 4.7" x 2.8".Comes in black color for new look.Has desktop form factor for better performance.Supports optical fiber, twisted pair and multi-mode fiber mode media types.Has 2, x RJ-45 10/100/1000Base-T/1000Base-SX ethernet technology, 1 x SC ports for easy connectivity.Has maximum transfer distance of 1804.46'.Features wired connectivity that provides easy network accessibility.Features 10/100/1000 UTP to multimode fiber converter, up to 550M range and auto-detects full/half-duplex transfer mode.Requires 10/100/1000 ethernet network, multimode SC fiber cable for easy accessibility.Includes 10/100/1000 SC multimode media converter, 550M, 850nm, AC power adapter, user manual.Meets WEEE, FCC, CE standards.Weighs 1.00 lbs.Comes with 1 year limited warranty.Tripp Lite SC Multimode media converter operates at a wavelength of 850 nm and extends up a distance of 550 m. Supports optical and twisted pair cable for reliable communication.