Network Interface Modules
53 results
Supports twisted pair cables for durability and improved signal transfer while ensuring smooth and seamless data transfer.Gigabit Ethernet port for ultra-fast network speeds.With 1000Base-T technology, get up to 1000Mbps data transfer rate over twisted pair cable
Cisco Catalyst C9300-NM-2Q= network module has two 40G slots with a QSFP+ connector in each slot The switch supports one hot-swappable network module that provides uplink ports to connect to other devices. The switch should only be operated with either a network module or a blank module installed. The switch generates logs when you insert or remove a network module with SFP/SFP+/SFP28 ports..Network module is great for data networking to provide secure user experience and high performance.This module has two 40G slots with a QSFP+ connector in each slot.If you use a 40G QSFP module, the ports default to 40G interfaces; in this case, the 10G interfaces are displayed but not used.The switch can operate without a network module, but a blank module (with no ports or SFP slots) is available and should be installed when uplink ports are not required.Removing and installing a network module can shorten its useful life, do not remove and insert a network module more often than is necessary.Do not remove the network module with connected cables or installed pluggable transceiver modules; always remove any cable and module before you remove the network module.Supported only on Cisco Catalyst 9300 series switches
The NETGEAR AGM731F fiber 1000BASE-SX SFP GBIC module expands the capabilities of your existing switch, enabling it to accept fiber-optic connections. The module is compact in size and plugs in easily, so you can upgrade your system in less than a minute. It features a single port, so you can extend network coverage across a larger area..Interfaces/ports: 1 x LC 1000Base-SX LAN.Dimensions: 0.4"(H) x 1/2"(W) x 2.6"(D).Compatibility: Adds fiber optic connectivity to the GSM7324, meets SFP GBIC standard for use with any SFP GBIC compliant slot 1000BASE-SX connectivity.Connectivity technology: Wired.Connectivity media: 62.5 um multi mode fiber 1000Base-SX, 50 um 1000Base-SX.Operating temperature: 32 - 104 deg F.Humidity: 10 - 90%.MTBF: 5,083,574 hours.Module support: Mini-GBIC, SFP.Data transfer rate: 1 Gb/s.Performance class: Gigabit ethernet.Form factor: Plug-in module.Application/usage: Data networking.Expansion slots: 4 (total)/4 (free) x SFP (mini-GBIC).5 years limited warranty.NETGEAR AGM731F Fiber 1000BASE-SX SFP GBIC Module - High-Speed Connections
Cisco Catalyst IE3300 Rugged Series switches deliver high-speed Gigabit Ethernet connectivity in a compact form factor, and are designed for a wide range of industrial applications where hardened products are required. The modular design of the Cisco Catalyst IE3300 Rugged Series offers the flexibility to expand to up to 26 ports of Gigabit Ethernet or up to 24 ports of Gigabit Ethernet and 2 ports of 10 Gigabit (10G) Ethernet with a range of expansion module options. The platform is built to withstand harsh environments in manufacturing, energy, transportation, mining, smart cities, and oil and gas. The IE3300 platform is also perfect for extended enterprise deployments in outdoor spaces, warehouses, and distribution centers..Expansion module for Catalyst IE3300 rugged series switches.Adds 16 100/1000Mbps Ethernet PoE+ ports.Dimensions: 6"H x 3.6"W x 5.3"D.Power consumption: 21W
Cisco Catalyst 9200 Series switches come with modular or fixed uplinks. With modular switches, the field-replaceable network modules provide infrastructure investment protection by allowing a nondisruptive migration from 1G to 10G and beyond..Spare 4 x 1GE network module for Catalyst 9200 switch.Compatible with Catalyst 9200 series switches; not supported on C9200-24PXG, C9200-48PXG.Comes in silver.Lifetime manufacturer limited warranty
The Intel 2-port Gigabit Ethernet converged network adapter meet the needs of the next-generation agile data center by providing flexibility for LAN/SAN networking. This low profile adapter offers superior performance up to 80 Gb/s bi-directional throughput. It has Ethernet flow director for hardware based application traffic steering and I/O virtualization innovations for optimum performance. This adapter features excellent small packet performance for network appliances and network function virtualization for reliable performance. It has data plane developer kit for efficient packet processing..Gigabit Ethernet network adapter provides unmatched features for virtualization, flexibility for LAN and SAN networking.Interfaces/ports: PCI Express 3.0 x8, SFP+ slot.Management protocols: Large Send Offload (LSO), packet filtering, PXE support, Quality of Service (QoS), Receive Side Scaling (RSS).Data transfer rate: 10 Gb/s.Dimensions: 2.7"H x 6.6"W.Meets BSMI, C-Tick, Directive 2011/65/EU, FCC Class B, KCC, MSA SFF-8431, RoHS, UL and VCCI certifications or standards.Form factor: Plug-in card.Remote management: RMON, SNMP, Network transport protocol: iSCSI, TCP/IP, UDP/IP.Media type supported: Twinaxial, Device supported: Server.Status indicators: Link/activity, port transmission speed.System requirements: FreeBSD 10, FreeBSD 9, Linux Kernel 2.6.32, Linux Kernel 3.x, Microsoft Windows Server 2008/Server 2008 R2/Server 2008 R2.Operating temperature: 32 - 131 deg F.Comes with lifetime limited warranty
Cisco Catalyst 9200 Series switches come with modular or fixed uplinks. With modular switches, the field-replaceable network modules provide infrastructure investment protection by allowing a nondisruptive migration from 1G to 10G and beyond..Spare 4 x 10GE network module for Catalyst 9200 switch.Compatible with Catalyst 9200 series switches.Comes in silver.Lifetime manufacturer limited warranty
The Cisco NIM-4FXO= voice interface card features four FXO interfaces/ports for enhanced connectivity..For Cisco 4000 series ISRs.Ports details: 4 x FXO.Sold invidually.Cisco network interface module with 4 x FXO ports.
The Transition Networks® TN-GLC-SX-MM 1000Base-SX Gigabit Ethernet SFP transceiver module is suitable for Gigabit Ethernet switches and routers, fiber channel switch infrastructure, xDSL applications and metro edge switching. This hot pluggable transceiver module with LLC 1000Base-SX interface, transfers data at the rate of 1.25 Gbps up to 550 m distance over multi-mode fiber media at a wavelength of 850 nm. This transceiver module helps to install in any SFP port allowing for 1000Base-SX interface to the network through the SFP connector..Hot-pluggable SFP transceiver module is suitable for Gigabit Ethernet switches, routers, fiber channel switch infrastructure and xDSL applications.Dimensions: 0.33"H x 0.52"W x 2.18"D.Supports multi-mode fiber (MMF) connection media.Interfaces/ports: One LC 1000Base-SX.Ethernet technology: Gigabit Ethernet.Maximum data transfer rate: 1.25 Gbps.Reach: 550 m.Wavelength: 850 nm.Media type supported: Optical fiber.Link budget: 8.5 dB.Power: 3.3 V, Power consumption: 0.66 W.Temperature range: 0 - 70 deg C operating, 40 - 85 deg C storage.Fiber optic cable standard: 62.5/125 u m, 50/125 u m.SFP footprint LC optical transceiver.Has been designed to install in any SFP port while allowing for 1000Base-SX interface to the network through the SFP connector.Meets MSA, IEC-60825, FDA 21, CFR 1040.10 and 1040.11, IEEE 802.3 2003, ANSI X3.297-1977 certifications and standards.Comes with lifetime warranty
The Omnitron 01-01-7207 SFP optical transceiver enables a single network device to connect to a wide variety of flexible fiber and copper cable through its interchangeable, compact media connectors. It is compatible with iConverter®, FlexPoint™, OmniConverter™ and miConverter™ products to meet specific network protocols and media requirements. This transceiver supports digital diagnostic by providing enhanced diagnostic information. The compact design and the ease of interchangeability of this unit provide a flexible solution for network designs..Optical transceiver module is compatible with iConverter media converter modules, T1/E1 multiplexers and network interface devices.LC duplex 1000Base-LX network.Media type supported: Optical fiber, fiber mode supported: Single-mode, fiber optic cable standard: 9/125 ohm m.Form factor: Hot-pluggable, hot-swappable, data transfer rate: 1.25 Gbps.Compatible with FlexPoint, OmniConverter and miConverter media converter modules that support SFP transceivers.Compliant with IEEE 802.3u fast Ethernet and 802.3z gigabit Ethernet specifications.Supports operational data rates for SONET OC-3/12/48, SDH STM-1/4/16 and fiber channel x1/x2.Supports a wide variety of cable types, supports digital diagnostic capability, low EMI metal enclosure.Temperature: 0 to 50 deg C commercial, -40 to 80 deg C storage.Meets RoHS, Green, WEEE standards.Comes with 1 year warranty.Certifications and standards: Compliant with MSA SFF-8472 standard.OMNITRON SYSTEMS iConverter 1000Base-LX SFP Optical transceiver supports data transfer rate of 1 Gb/s and is suitable to use with networking applications.
The Dell SFP transceiver delivers fiber connectivity to extend the range of your network. This hot-pluggable transceiver with SFP (Small Form Factor Pluggable) footprint features a Duplex LC connector. The Dell networking 1000BASE SFP transceiver provides 1000BASE connectivity up to 10 km..SFP transceiver delivers fiber connectivity to extend the range of your network.Comes in silver.Compatible with different EMC Networking/PowerSwitch/PowerConnect/PowerEdge systems.Cabling type: 1000BASE-LX.Optical wave length: up to 1310nm.Maximum transfer distance: 6.2 miles.Data transfer rate: 1Gbps
The ION S3220 is a stand-alone managed Network Interface Device (NID) that provides an interface between 10/100/1000Base-TX ports and 1000Base-SX/LX ports, allowing users to manage their links while integrating fiber optic cabling into 10/100/1000 copper environments. As a remotely managed device, the S3220 can be managed individually via an IP address or it can be managed in-band, over the fiber when linked to a C3220 card installed in a managed ION chassis. With advanced features like IEEE 802.3ah Link OAM, VLAN, QoS, SSH/SSL, jumbo frame support, and bandwidth allocation, the S3220 offers a variety of methods for the secure delivery of Ethernet services in business and mobile backhaul applications..MEF 9, 14 and 21 certified.802.3ah Link OAM.10K Jumbo Frame Support.Built on 32 nm technology and uses a high-k metal gate to enable higher performing transistors on the same node reducing leakage of currents
Cisco™ NIM-1MFT-T1/E1 1 Port Multi-Flex WAN Interface Card.Interface: One T1/E1.Dimensions: 1.3"H x 3.5"W x 7.2"D.Network technology: T1/E1.Network technology: T1/E1.Maximum data transfer rate: 1.54 Mbps T1 and 2.05 Mbps E1.Compatibility: Cisco 4400 series integrated services routers.Specification: Clear-channel data, MFT packet voice.Support multiple integrated data, voice and video applications while facilitating the migration from data-only and circuit-switched voice services.Weight: 0.4 lbs.
Cisco™ 100Base-X small form-factor pluggable is optically interoperable with respective 100Base-X ethernet that interfaces on the same link. Plug has max transfer distance of 32810' and optical wave length of 1310 nm..1 x LC duplex 100Base-LX10.Optically interoperable with respective 100Base-X Ethernet interfaces on the same link.Connectivity technology: Wired.Dimensions: 0.3"(H) x 0.5"(W) x 2.2"(D), Form factor: Hot swappable.Max transfer distance: 32810', Optical wave length: 1310 nm.Temperature: 32 -122 deg F operating.Data transfer rate: 100Mbps fast ethernet, Connectivity media: G.652 micrometer single mode optical fiber.Compatibility: Catalyst 2960, 2960-24, 2960-48, 2960G-24, 2960G-48, 2960S-24, 2960S-48, 3560, 3560-12.Application/usage: Data networking.Interchangeable with other 100BASE-X SFPs on the same line card.Certification and Standards: IEEE 802.3, IEEE 802.3ah.Cisco™ 100BASE-LX10 SFP XCVR module is a pluggable device that operates on ordinary multimode fiber-optic link and is a hot-swappable input/output device that plugs into fast ethernet ports.
Intel® Ethernet server adapter consists of data link protocols such as 10MB LAN, 100MB LAN and gigabit LAN. Adapter supports twisted pair media type and has audio video bridging with power management technologies..Network adapter interface: PCI express x1.Adapter represents the next step in the Gigabit Ethernet networking evolution for the enterprise and data center, offering audio video bridging.Dimensions: 2.6"(H) x 0.7"(W).Ports: Single port, Card height: Low-profile, full-height, Connector and cable: RJ-45 copper, Cable type: Category-3, category-5, category-5e up to 100 m.Media and performance: Category 5e twisted pair.Network and communication: 10/100/1000base-T.Device supported: PC, Mac.Form factor: Plug-in card.Ethernet controller: Intel Ethernet controller I210.Package includes: Ethernet server adapter I210, low-profile bracket.Standards and certificates: FCC B, UL CE, VCCI, BSMI, CTick, KCC, IEEE standards: 802.1Qav, 802.1Qat, 802.1AS, 802.3, 802.3u, 802.3x, 802.3z, 802.3ab, 802.3az.Warranty: Lifetime.Intel® Ethernet server adapter is a plug in card which has 10/100/1000Base-T network technology and efficiently manages packets with minimum latency.
The Cisco 4000 Series Integrated Services Routers (ISRs) host the Cisco network interface modules (NIMs), which have evolved from the enhanced high-speed WAN interface card (EHWIC), increasing port density and module capability. Up to three integrated NIM slots on the 4000 Series allow for flexible configurations. The NIMs support online insertion and removal (OIR), reducing the downtime required for new or replacement modules..Interfaces/Ports Details: 4 x FXS/DID Network.Application/Usage: Voice.4-Port Network Interface Module - FXS, FXS-E and DID
The Dell™ 407-BBOR SFP mini-GBIC network transceiver is perfect for data networking and optical network applications. It features one LC duplex 1000Base-SX network interface and supports Gigabit Ethernet technology for high-speed data transmission. This network transceiver transmits data at a rate of 1 Gbps. It offers data transmission over multi mode optical fiber media up to a range of 550 m at 850 nm wavelength. This transceiver is compatible with Dell Networking N2048, N4000, N4032F, N4064F, N2024P switches, Dell PowerConnect 2848, 5524P, 5548p, 6224F, 6248P and 7024F switches..SFP network transceiver for data networking and optical network applications.Interfaces/ports: One LC duplex 1000Base-SX network.Data transfer rate: 1 Gbps.Ethernet technology: Gigabit Ethernet.Wavelength: 850 nm.Media type supported: Multi-mode optical fiber.Compatibility: Dell Networking N2048, N4000, N4032F, N4064F, N2024P switches, Dell PowerConnect 2848, 5524P, 5548p, 6224F, 6248P, 7024F switches.Max transfer distance: 550 m
The HP® 24 ports plug-in expansion module is compatible for use with 5400R zl2 switch series. It has 20 x RJ-45 ports and 1000Base-T Network LAN interfaces for quick data transfer. This module is perfect for data networking applications. The expansion module offers 1 Gb/s maximum data transfer rate and supports twisted pair media..Expansion module is suitable for data networking.Has 24 RJ-45 1000Base-T network LAN ports for connectivity.Data transfer rate: 1 Gbps.Dimensions: 1.8"H x 10.3"W x 8.1"D.REACH and Green Compliant.Form factor: Plug-in.Media type supported: Twisted pair, Ethernet technology: Gigabit Ethernet.Suitable with 5400R zl2 series switch.Contains a module.Weight: 1.74 lbs.
Enable reliable fiber optic connections with this Netgear ProSafe AXM761 10GBASE-SR SFP+ Transceiver. This versatile short reach SFP optical transceiver is designed to deliver up to 10 Gb/s transfer speeds using multi-mode fiber cables with LC duplex connectors..Multimode fiber with an LC connector type for short-range 10 Gigabit Ethernet connectivity..Network Transceiver Type is SFP+, and it is used for providing short-range 10 Gigabit Ethernet connectivity over multimode fiber..Module supports a data transfer rate of 10 Gbps (10,000 Mbps) for high-speed connectivity..Provides connectivity up to 300 meters on OM3 fiber and up to 400–550 meters on OM4 fiber..Gigabit Ethernet SFP+ transceiver designed for 10 Gigabit Ethernet networks..Transceiver consumes less than 1 Watt of power, ensuring energy efficiency..Hot-swappable, allowing installation or removal without powering down the device..Module is MSA compliant, ensuring interoperability across multiple vendors..MTBF of over 1,000,000 hours, indicating high reliability and durability..Operates at a wavelength of 850 nm, suitable for short-range multimode fiber links..Product is sold as 1 unit (Each)..Data link protocol: 10 gigabit-ethernet.Adds 10 gigabit-ethernet "short-reach" LC fiber connectivity to the standard SFP+ interfaces.Fits into the two built-in 10 GE SFP+ interfaces of GSM72xxPS / GSM73xxS.Fits into the 10 GE SFP+ interface of SFP+ Adapter module AX743.Certifications and standards: RoHS, UL 1950 CSA 22.2 No. 950.Netgear ProSafe SFP+ Transceiver fits into standard 10GB SFP+ interfaces and provides hot-swappable installation or removal.
The Allied Telesis™ AT-SPSX-90 SFP (mini-GBIC) module is perfect for data networking and optical network. This multi-mode module with SX network works based on 1000Base-SX Gigabit Ethernet technology. The hot-swappable module supports a maximum distance of 1804.46' and maximum data transfer rate of 1.25 Gbps. It has 1 x LC 1000Base-SX network interface for external connections. This module supports 62.5/125 mu m and 50/125 mu m optic fiber..Hot-pluggable SFP (miniGBIC) module is perfect for data networking.Connectors: 1 x LC.Ethernet technology: Gigabit Ethernet.Network technology: 1000Base-SX.Data transfer rate: 1 Gbps.Media type: 62.5/125 mu m, 50/125 mu m multi-mode optical fiber.Maximum reach: 220m/550m.Wavelength: 850 nm.Meets Eco, RoHS, WEEE, REACH standards
Industry standard Cisco small form factor pluggable (SFP) gigabit interface converter is a hot-swappable input/output device that plugs into a gigabit Ethernet port or slot, linking the port with the network..Interfaces/ports: 1 x LC duplex 1000Base-LX/LH.Dimensions: 0.3"(H) x 1/2"(W) x 2.2"(D).Compatibility: Cisco IE 3000 series switches, cisco 3200 series rugged routers, cisco MWR 2900 mobile wireless routers.Connectivity technology: Wired.Connectivity media: Single mode fiber 1000Base-LX/LH.Operating temperature: -40 - 185 deg F.Fiber type: SMF/MMF.Cabling type: Ethernet 1000Base-LX.Additional information: Spare product, range: 10 Km, wavelength: 1300 nm.Data transfer rate: 1 Gb/s gigabit Ethernet.Form factor: Hot swappable/plug-in.Application/usage: Data networking.SFP (mini-GBIC) transceiver module 1000 MBPS SFP single mode rugged 1000BASE-LX/LH SFP for MMF and SMF.
To ensure that specifications are met over FDDI-grade, OM1 and OM2 fibers, the transmitter should be coupled through a mode conditioning patch cord. No mode conditioning patch cord is required for applications over OM3..SFP+ module is perfect for data networking, optical network.Dimensions: 0.3"H x 0.5"W x 2.2"D.Compatible with A9K-16T/8-B=, ME-3600X-24FS-M=, ME-3600X-24TS-M, N7K-F132XP-15=, N7K-M132XP-12L, WS-X45-SUP7-E/2 networking products.Interface/ports: 1 x LC duplex 10GBase-LRM network.Media type supported: Optical fiber, fiber mode supported: Multi-mode, single-mode, Ethernet technology: 10 Gigabit Ethernet.Maximum data transfer rate: 10 Gbps.Form factor: Hot-swappable, plug-in module.Up to 980', fiber optic cable standard: 62.5 ohm m, 50 ohm m, wavelength: 1300nm.Supports link lengths of 220m on standard fiber distributed data interface (FDDI) grade multimode fiber (MMF).Temperature range: 32 - 158 deg F.Transmit power: -6.5 to 0.5 dBm.Receive power: -8.4(in average) and -6.4 (in OMA) - 0.5 dBm.Connectivity media: 62.5 um, 50 um multi-mode fiber 10GBase-LRM, single-mode fiber 10GBase-LRM.Power consumption: 1 W.Core size: 62.5 - G.652 microns.Cable distance: 220 - 300 m.Cable type: MMF and SMF.Transmit and receive wave length: 1260 - 1355nm.Compliant standards: IEEE 802.3ae, IEC 60825-1, laser class 1.Warranty: 90 days limited.10GBase-LRM SFP transceiver module supports link lengths of 220 m on standard fiber distributed data interface (FDDI) grade multimode fiber (MMF).
The Cisco SFP-10G-SR module is the multimode 10G fiber optical transceiver, and it supports up to 400m link length when uses 4700Mhz KM MMF (OM3). The 10GBase-SR SFP+ module offer customers a wide variety of 10 gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications..Cisco SFP-10G-SR module is the multimode 10G fiber optical transceiver.Industry’s smallest 10G form factor for greatest density per chassis.Compatibility: Cisco nexus 5000 series Switches, cisco nexus 7000 series switches.Hot Pluggable.850nm VCSEL transmitter, PIN photo-detector.Maximum link length of 300m on 2000MHz/km MMF.Operating case temperature: 0 to 70 °C.Additional information: Spare product, distance 300 m.Form factor: Plug-in module.Application/usage: Data networking.90 days limited warranty.The Cisco SFP-10G-SR module is the multimode 10G fiber optical transceiver. SFP+ transceiver module supports a link length of 26 m on standard fiber distributed data interface (FDDI)-grade multimode fiber (MMF).
The Cisco SFP-10G-SR module is the multimode 10G fiber optical transceiver, and it supports up to 400m link length when uses 4700Mhz KM MMF (OM3). The 10GBase-SR SFP+ module offer customers a wide variety of 10 gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications..Cisco SFP-10G-SR module is the multimode 10G fiber optical transceiver.Industry’s smallest 10G form factor for greatest density per chassis.Compatibility: Cisco nexus 5000 series Switches, cisco nexus 7000 series switches.Hot Pluggable.850nm VCSEL transmitter, PIN photo-detector.Maximum link length of 300m on 2000MHz/km MMF.Operating case temperature: 0 to 70 °C.Additional information: Spare product, distance 300 m.Form factor: Plug-in module.Application/usage: Data networking.90 days limited warranty.The Cisco SFP-10G-SR module is the multimode 10G fiber optical transceiver. SFP+ transceiver module supports a link length of 26 m on standard fiber distributed data interface (FDDI)-grade multimode fiber (MMF).
Omnitron Pluggable optical transceiver operates at 850 nm wavelength and covers a maximum distance of up to 1800'. Transceiver is compatible with iConverter media converter modules, T1/E1 MUXes and network interface devices..Interfaces/ports: 1 x LC 1000Base-SX.Connectivity media: Multi-mode optical fiber.Ethernet technology: Gigabit Ethernet.Form factor: Plug-in module.Data rate: 1 Gbps.Cable distance: 550 meters.Wavelength: 850 nm.Application/usage: Data networking.Connectivity technology: Wired, Min. Tx Power (dBm): -9.5, Max. Tx Power (dBm): -4,Min. Rx Sense (dBm): -17, Max. Rx Power (dBm): -3, Link budget (dBm): 7.5.Low EMI metal enclosure, supports a wide variety of cable types.Digital diagnostic capability.Pluggable optical transceivers enable flexible fiber and copper connectivity.Warranty: Lifetime.Omnitron Pluggable optical transceiver transfers data at a rate of 1 Gb/s and enables a single network device to connect to a wide variety of fiber optic cable types.
The Cisco 10GBASE-SR module supports link lengths up to 26m on standard Fiber Distributed Data Interface (FDDI) grade multimode fiber (MMF). Using 2000MHz x km of MMF (OM3), it is possible to create link lengths up to 300m, and with 4700MHz x km MMF (OM4), link lengths up to 400m are possible..Multimode fiber optic transceiver with dual LC/PC connector.10GBASE SFP+ module for data center, enterprise wiring closet, and service provider transport applications.Provides data transfer rates up to 10Gbps.Supports link lengths up to 26m on standard FDDI-grade MMF; up to 300m on 2000MHz x km MMF (OM3); and up to 400m on 4700MHz x km MMF (OM4).Power consumption: 1W.Hot-swappable, plugs into an Ethernet SFP+ port.Compliant with the SFP+ MSA SFF-8431 standard.Wavelength: 850nm.Form factor: Hot-swappable.MSA compliant.Commercial temperature: 32 to 158 degrees Fahrenheit.Supports digital optical monitoring capability.Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link.1-year manufacturer limited warranty
Dell™ Sonicwall® 1000Base-SX SFP Short haul transceiver module eliminates potential points of failure associated with separate multiple vendor solutions. Module has SFP mini-GBIC compatible slots and supports wired connectivity technology..Interfaces/ports: 1 x Ethernet 1000Base-SX network.Media & performance: Connectivity media: Optical Fiber 1000Base-SX, Data Transfer rate: 1 Gb/s.Ethernet technology: Gigabit Ethernet.For SuperMassive E10000 Series, SuperMassive 9000 Series.Application/usage: Data Networking, optical network.Form factor: SFP.Warranty: 1 year limited.Dell™ Sonicwall® 1000Base-SX SFP Mini-GBIC short haul transceiver module is used in data networking as well as optical network and has a data transfer rate of 1 Gb/s.
Intel I350-T2 chipset supports reliable and advanced network connectivity Compliant with IEEE 802.3, 802.3u, 802.3ab with full duplex and Wake-on-LAN support..Type of Product/Use: Gigabit Ethernet Card for Server.Adapter Speed: Gigabit Ethernet.Number of ports and Type:2 RJ-45.Dimensions as H x W x D in inches: 0.79" x 5.43" x 4.72".Installation Info: Plug-in Card.Warranty: 1 Year.Features innovative power management including Energy Efficient Ethernet (EEE) and DMA Coalescing to increase efficiency and reduce power consumption.Fits both standard and low profile system chassis with the included spare low profile bracket.⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.Quickly adds two independent Gigabit Ethernet ports through an available PCI Express slot to server or desktop systems
The Dell™ SFP+ optical transceiver with 10GBase-LR network technology, offers 10GbE connectivity up to 10 km distance. It works on Gigabit Ethernet technology for data networking applications. This hot-pluggable transceiver featuring SFP footprint, features a unique digital diagnostic monitoring interface for real-time access to device operating parameters. The transceiver with a duplex LC connector, is compatible with select Dell networking N4000 series and N-series systems..Transceiver module for data and optical networking applications.Port: 10GBase-LR: 10 Gb/s, up to 6.2 miles.Connectivity media: Single-mode optical fiber.Plug-in module form factor.Optical wavelength: 1310 nm.Dell Networking transceiver module features 10GBase-LR port, 10 Gbps, upto 6.2 miles.
Transition Networks® Cisco compatible SFP transceiver module features 1000Base-LX interfacing through SFP connector and are designed for bidirectional serial-optical data communication. Module used in gigabit ethernet operate at a speed of 1.25 Gbps..Interfaces/ports: 1 x 1000Base-LX, Interfaces/ports details: 1 x LC 1000Base-LX.Dimensions: 0.3"(H) x 0.5"(W) x 2.2"(D).Compatible with: 1000BLX SM LC 10KM 3.3V.Application/usage: data networking.Warranty: lifetime.Transition Networks® Single mode SFP transceiver module are Cisco compatible allowing 1000Base-LX interface to the network and operates at 1310nm wavelength there by finding its application in gigabit ethernet, metro edge switching.
Add up to two 1GbE SFP modules to a PCI Express (PCIe) 2.0 x1 (or higher) slot in an IT Administrator workstation or server backplane, using this 2-Port SFP Network Controller. The network controller features an Intel I350 chip known for its reliability and high-performance capabilities, offering low-latency and low CPU utilization, ensuring smooth and efficient network data transfer, which is critical for business applications and services. Support for VMDq, SR-IOV, and Intel® VT-c technologies allow for enhanced virtual machine performance, reduced CPU overhead, and improved network virtualization capabilities. The PCIe network card supports PXE boot, enabling centralized operating system deployment and updates. It also features 9K jumbo frame support, reducing packet overhead for improved data transmission efficiency. VLAN tagging support allows for efficient network management and segmentation..Network controller to add a up to two 1GbE SFP modules to a PCI Express (PCIe) 2.0 x1 (or higher) slot in your workstation.Provides Ethernet speeds up to 1Gbps per port.Has two SFP slots.Compatible with both MSA-compliant and branded 1GB SFP modules, as well as direct attach copper cables (DACC).Meets or exceeds WEEE standards.Intel I310 chip offers low latency and low CPU utilization and ensures smooth and efficient network data transfer, which is critical for business applications and services.Support for VMDq, SR-IOV, and Intel VT-c technologies allows for enhanced virtual machine performance, reduced CPU overhead, and improved network virtualization capabilities.SFP slots for interchangeable SFP modules allows selecting fiber transceiver modules that best suit the network needs of the application, based on the distance and connector type.Full-profile bracket are installed by default, with a low-profile bracket included.PXE boot enabled for centralized OS deployment and updates.9K jumbo frame support for reduced packet overhead.VLAN tagging support for efficient network management.Features a built-in heat sink to keep the controller chip at optimal temperatures, ensuring sustained performance.2-year manufacturer limited warranty
The Cisco SFP-10G-LR-S= SFP+ module measuring 0.3" x 0.5" x 2.2", supports a link length of 10 km on standard single-mode fiber. It has LC/PC duplex 10GBase-LR network interface for optimal connectivity. This hot-swappable module transmits data over optical fiber media..SFP+ module is suitable for SMF.Dimensions: 0.3"H x 0.5"W x 2.2"D.Has one LC/PC duplex 10GBase-LR network port for connectivity.Supports 10 Gigabit Ethernet technology for high speed connectivity.Supports single-mode fiber.Optical fiber media for quick data transfer.Network technology: 10GBase-LR.Form factor: Hot-swappable.Perfect for both data and optical networking.Weight: 2.65 oz..Comes with 1 year limited warranty
The AddOn transceiver module SFP+ allows you to transfer data at up to 1 Gbps through your Ethernet connection. The device is hot swappable, so you can plug it in or remove it without having to reset your system. The duplex LC connector interface works well with wired connections for a solid line to the network..Interfaces/ports: 1 x 1000Base-SX, 1 x LC 1000Base-SX.Dimensions: 0.3"(H) x 1/2"(W) x 2.2"(D).Compatibility: WS-SUP720, WS-SUP32 -8GE-3B, WS-SUP32 -10GE-3B, WS-X6724-SFP, WS-X6748-SFP.Connectivity technology: Wired.Connectivity media: 62.5/50 um multi mode fiber 1000Base-SX.Humidity: 0% - 95%.Operating temperature: 0 - 70 deg C.Digital diagnostic monitor interface compatible with SFF-8472.Hot pluggable.Data transfer rate: 1 Gb/s gigabit Ethernet.Duplex LC connector interface.Form factor: Hot-swappable.Application/usage: Data networking.2 years limited warranty.Monaural; choice of 3 wearing styles (over the head, over the ear and behind the neck).Noise-canceling microphone eliminates background noise and focuses on your voice.Convertible design.Multipoint.1-year mfr. limited warranty.Safety Data Sheet.AddOn Transceiver Module SFP+ - Hot-Swappable Data Networking
ACP's industry-standard 10Gbase-SR SFP+ is a hot-swappable input/output device that plugs into a gigabit Ethernet slot, linking the port with the fiber-optic network..Interfaces/ports: 1 x 10GBase-SR, 1 x LC/PC duplex 10GBase-SR network.Dimensions: 0.3"(H) x 1/2"(W) x 2.2"(D).Compatibility: Cisco Nexus 5000 series, 7000 series switches.Connectivity technology: Wired.Connectivity media: 62.5 um, 50 um multi mode fiber 10GBase-SR.Humidity: 0% - 95%.Operating temperature: 32 -158 deg F.Enclosure type: Plug-in module.Data transfer rate: 10 Gb/s gigabit Ethernet.Form factor: Hot-swappable.Application/usage: Data networking.3 years limited warranty.Transceiver module compatible 10GBase-SR SFP+ sub watt power consumption and its excellent EMI performance allow system design with high port density.
WatchGuard WG9020 Firebox M-Series 2-Port 10GbE SFP+ Expansion Module The WatchGuard Firebox M-Series 2-Port 10-Gigabit SFP+ Expansion Module allows you to add more interfaces to your M-Series Firebox appliance (sold separately). It is easily installed in the interface slot on your 3rd Gen Firebox (see specifications tab for compatibility)..WG9020 module have Single Mode for Fiber cable and LC (Lucent Connector) is for fiber connector..Network Transceiver is SFP+ Transceiver Module Used for 10 Gigabit Ethernet connectivity..The WG9020 module supports a data transfer rate of up to 10 Gbps, (10,000 Mbps), 10,000,000 Kbps (Kilobits per second) over optical fiber..This module supports a maximum distance of up to 10,000 meters when using single-mode fiber..The WG9020 module Supports 10 Gigabit Ethernet.Power Consumption for this module is 2.5 watts..This module is msa compliant..It supports MTBF 1,000,000 hours..The WG9020 module operates at a wavelength of 1310 nm.
Optimized for both telecommunication and data communications applications, this "SonicWall 01-SSC-9786 10GB-LR SFP+ Long Reach Fiber Module Single-Mode Transceiver" offers high standard solutions to meet home and office solutions. Manage data exchange seamlessly as it offers a smooth interface. Featuring an SR interface connector, it has an advanced 1 x 10GBase-SR port. Having a 10 gigabit Ethernet support, this hot-pluggable enabled unit offers wired connectivity. Offering a wider reach, this unit features a strong 1310nm wavelength and enhanced speeds of up to 10 gbps..Interface/Ports: 1 x 10GBase-SR.Interface Connector: SR.Ethernet Technology: 10GBE.Connectivity Technology: Wired.Form factor: Hot-Pluggable.Data Transfer Rate: 10GBps.Wavelength: 1310 nm.SonicWall 01-SSC-9786 10GB-LR SFP+ Long Reach Fiber Module Single-Mode Transceiver offers excellent data transfer rates
HPE BladeSystem c-Class compatible SFP+ transceiver (455883-B21) supports up to 400m link lengths over OM4 MMF (300m over OM3 MMF) via an LC duplex connector. It is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae standards. Digital diagnostics monitoring is available via a 2-wire serial interface, as specified in SFF-8472. Featuring low power consumptionand and high speed, this 10G SFP+ transceiver is ideal for data centers, enterprise wiring closets, service provider transport applications, Radio & Baseband Units, etc..Interfaces/ports: 1 x 10GBase SR SFP+.Compatibility: PC.Connectivity technology: Wired.Data transfer rate: 10GB/s gigabit ethernet.Maximum transfer distance: 980'.Form factor: Plug in module.HP 10GBase-SR Optical Transceiver Module - PC Compatible
Cisco™ Downstream SFP module is a hot-swappable I/O device that plugs into a gigabit Ethernet slot and linking it with the fiber-optic network. Module supports data networking applications and offers data transfer rate of 1 Gb/s..1 x LC 1000Base-BX.0.3"(H) x 0.5"(W) x 2.2"(D).Cisco ME 2400, Catalyst 2960 series, Cisco ME 3400, Catalyst 3560 series, Catalyst 3750 series, Catalyst 4500 series, Catalyst 4900 series, Catalyst 6500 series.Wired.Connectivity media: G.652 microm single-mode optical fiber.Form factor: Hot-swappable.Management: Digital optical monitoring (DOM) functions, Application/usage: Data networking.Data transfer rate: 1 Gbps gigabit ethernet.Operating transmission range: Up to 10 km.Small form-factor pluggable (SFP) gigabit interface converter is a hot-swappable input/output device that plugs into a Gigabit Ethernet-port or slot, linking the-port with the network.1490-nm TX/1310-nm RX wavelength.Warranty: 90 days limited.Cisco™ Downstream SFP module has the ability to go up to 10 km over G.652 microm single-mode optical fiber and features digital optical monitoring functions.
Cisco™ BiDi Short-reach transceiver module with LC duplex 40GBase-X interface operates with 50 micrometer multi-mode optical fiber. Hot-swappable transceiver module with LC connectors can be used for data networking/optical network applications..Interfaces/ports: 1 x LC duplex 40GBase-X.Media & performance: 50 micrometer multi-mode optical fiber 40GBase-X.Ethernet technology: Gigabit Ethernet.Form factor: Hot-swappable.Data transfer rate: 40 Gbps.Connector: LC.Dimensions: 0.5"(H) x 0.7"(W) x 2.9"(D).Wavelength: 832 - 918 nm.Distance supported: 100/150 m.Compatibility: Cisco Nexus 9000 series switches.Power: 5 dBm transmit, 5 dBm receive, Power consumption: 3.5 W.Application/usage: Data networking, optical network.Gray.Operating temperature: -10 - +70 deg C.Certifications and standards:: RoHS-6, Green compliant.Warranty: 90 days limited.Cisco™ BiDi Short-reach transceiver module with LC duplex 40GBase-X interface transfers data at the rate of 40 Gb/s and is compatible with Cisco Nexus 9000 series switches.
Cisco® Transceiver module features wired connective technology and has 1 x network - ethernet 1000Base-Sx - LC/PC multi-mode x 2 ports for cabling. Transceiver module is compatible with PC..Interfaces/ports: 1 x network - ethernet 1000Base-SX - LC/PC multi-mode x 2.Dimensions: 0.3"(H) x 1/2"(W) x 2.2"(L).Compatability: PC.Connectivity technology: Wired.Wavelength: 850 nm.Operating distance: 0.6 miles.Form factor: Plug in module, hot swappable.Fibre type: Multimode.Cabling type: 1000Base-SX.Cisco® GLC-SX-MMD= Transceiver Module has 1 x network - ethernet 1000Base-SX - LC/PC multi-mode x 2 ports.
The HP® 20 ports plug-in expansion module is compatible for use with 5400R zl2 switch series. It has 20 x RJ-45 ports and 1000Base-T Network LAN interfaces for quick data transfer. This module is perfect for data networking and optical network applications. The expansion module offers 10 Gb/s maximum data transfer rate and supports twisted pair as well as optical fiber media..Expansion module is suitable for data networking, optical network.Has 20 RJ-45 1000Base-T network LAN PoE+ and 4-port 1G/10GbE SFP+ with MACsec v3 zl2 interface for connectivity.Data transfer rate: 1 Gbps.Dimensions: 1.8"H x 10.3"W x 8.1"D.REACH and Green Compliant.Form factor: Plug-in.Media type supported: Twisted pair, optical fiber, Ethernet technology: Gigabit/10 Gigabit Ethernet.Suitable with 5400R zl2 series switch.Contains a module.Weight: 2.05 lbs.
The Opengear 569023 1000Base-SX Optical Fiber SFP Transceiver module for data networking, transfers data at the rate of 128 MBps. The module in silver color, has 1000Base-SX network interface for better connectivity..SFP transceiver module for data networking.Color: Silver.Interfaces/ports: One 1000Base-SX network.Data transfer rate: 128 MBps.Transfer distance: 1804.46'
Cisco Transceiver module is compatible with Nexus 3000 series, Nexus 6500/7000 series, ASR 9000 series routers. Transceiver module suits MMF, 4-lanes, 850-nm wavelength, 12-fiber MTP/MPO connector..QSFP+ transceiver module is used for data center, high performance computing networks, enterprise core and distribution layers applications.Dimensions: 0.5"H x 0.7"W x 2.9"D.Interface/ports: 1 x MPO 40GBase-SR4 network.Maximum data transfer rate: 40 Gbps.Ethernet technology: 40 Gigabit Ethernet.Media type supported: Optical fiber, fiber mode supported: Multi-mode.Nominal wavelength: 850 nm, core size: 50 micron.Maximum transfer distance: 492', modal bandwidth: 500 MHz/km (OM2), 2000 MHz/km (OM3), 4700 MHz/km (OM4).Transmit power: -1 dBm per lane, receive power: 2.4 dBm.Compatible with Cisco Nexus 3064 switch, Nexus 2248PQ 10GE, ASR 9000 Series, 3016Q, 3064-E, 3064PQ, 3064-X, 6001.Form factor: Hot swappable.RoHS-6, MSA compliant.High-speed electrical interface compliant to IEEE 802.3ba.Cisco Transceiver module offers customers a wide variety of high-density and low-power 40GB Ethernet connectivity options for data center.
The Transition Networks TN-GLC-FE-100FX small form factor pluggable (SFP) Transceiver modules is designed to install in any SFP port allowing for 100Base-FX interfaces to the network through the SFP connector..Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.With its thicker diameter to carry the light of multiple wavelengths, multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity.Featuring Fast Ethernet port to enhance the data transfer rate by up to 100 Mbps for connectivity.With 100Base-FX technology, enjoy up to 100 Mbps data transfer rate over optical fiber cable
The Cisco transceiver module has one LC duplex 10GBase-LR port, and it is compatible with the Alcatel-Lucent Omniswitch 6900, making it easy to install and use with your system. The piece is hot swappable and allows you to select the interface of your choice for flexibility. It is the smallest 10G form factor, so it saves you space..Interfaces/ports: 1 x LC duplex 10GBase-LR.Dimensions: 0.3"(H) x 1/2"(W) x 2.2"(D).Compatibility: Alcatel-lucent omniswitch 6900.Smallest 10G form factor.Supports 10GBASE Ethernet and OTU2/OTU2e.Hot-swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch.Provides flexibility of interface choice.Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link.Supports "pay-as-you-populate" model.Supports digital optical monitoring capability.Supports the cisco quality identification (ID) feature that enables a Cisco switch to identify whether the module is certified and tested by Cisco.Form factor: Hot-swappable.Cisco Transceiver Module - Switch Accessories for Networking
Boost your network efficiency with the SonicWall Ethernet SFP+ Transceiver Module, offering lightning-fast data transfer speeds of 10,000 Mbps, superior optical fiber connectivity, and a compact design tailored for seamless integration into high-performance networking environments..Interface/ports: 1 x Ethernet 10GBase-SR, 1 x SFP+.Compatibility: PC.Connectivity technology: Wired.Form factor: Plug-in module.Cabling type: 10GBase-SR.Data transfer rate: 10 Gbps.Data link protocol: 10 gigabit-ethernet.Application/usage: Data networking, optical network.Sonicwall SFP+ Transceiver module connects the electrical circuitry with the optical or copper network and features 10Gbase-SR port.
The Cisco Quad Small Form-Factor Pluggable (QSFP) portfolio offers customers high-density and low-power Ethernet connectivity for data center, high-performance computing networks, enterprise core and distribution layers, and service provider applications. The Cisco QSFP dual-rate bi-directional (BiDi) transceiver is a pluggable optical transceiver with a duplex LC connector interface for short-reach data communication and interconnect applications using Multi-Mode Fiber (MMF)..Uses multimode fiber (MMF) as the fiber cable type and features a duplex LC optical connector for connectivity..QSFP transceivers enable high-speed 40G/100G Ethernet over multimode fiber using BiDi tech for short-reach data center connectivity..Supports data transfer rates of up to 100,000 Mbps (100 Gbps) and 40,000 Mbps (40 Gbps)..Maximum distance of 100 meters over OM4 or OM5 multimode fiber for 100G Ethernet and 150 meters over OM4 for 40G Ethernet..Supports 40 Gigabit Ethernet (40GbE) and 100 Gigabit Ethernet (100GbE) over multimode fiber using a duplex LC connector..Has a typical power consumption of approximately 3.5 watts..Hot-swappable, allowing it to be inserted or removed from a compatible device without powering down the system..MSA (Multi-Source Agreement) compliant, ensuring interoperability with other QSFP28-compliant devices across various platforms..Operates at two wavelengths: 855 nm and 908 nm, using short-range bidirectional optics over multimode fiber.
AddOn® 1000BASE-SX 850nm 550m MMF SFP Module is built to meet or exceed the OEM's specifications and supports optical networking. Module can be deployed with 3rd party transceivers for seamless network performance and features MMC connectivity..Interface/ports: 1 x LC 1000Base-SX network.Dimensions: 0.3"(H) x 0.5"(W) x 2.2"(D).Compatibility: Catalyst Express 500, Catalyst Express 520, ME 3400, ME 3600X, ME 3800X, ME 4900 Series, Catalyst 2940, 2950, 2960, 2960-S, 2960-C, 2970, 2975, 3560, 3560-E, 3560-X, 3560-C, 3750, 3750-E, 3750-X Series.Connectivity technology: Wired.Form factor: Hot-swappable.Connectivity media: Multi-mode optical fiber 1000Base-SX.Max transfer distance: 550m.Data transfer rate: 1 Gbps gigabit Ethernet.850 nm.Environmental condition: Operating temperature: -5 - 85 deg C.Distance up to 550m with 62.5/125microm MMF.Singer 3.3 V Power supply and TTL Logic interface.Duplex LC connector interface.Digital diagnostic monitor interface compatible with SFF-8472.Warranty: Lifetime limited.AddOn® 1000BASE-SX 850nm 550m MMF SFP Module is supported with DOM to access real-time operating parameters and is hot swappable.