Network Switch Modules

Cisco Catalyst 9200 Series switches come with modular or fixed uplinks. With modular switches, the field-replaceable network modules provide infrastructure investment protection by allowing a nondisruptive migration from 1G to 10G and beyond..Spare 4 x 10GE network module for Catalyst 9200 switch.Compatible with Catalyst 9200 series switches.Comes in silver.Lifetime manufacturer limited warranty

Cisco Catalyst 9200 Series switches come with modular or fixed uplinks. With modular switches, the field-replaceable network modules provide infrastructure investment protection by allowing a nondisruptive migration from 1G to 10G and beyond..Spare 4 x 1GE network module for Catalyst 9200 switch.Compatible with Catalyst 9200 series switches; not supported on C9200-24PXG, C9200-48PXG.Comes in silver.Lifetime manufacturer limited warranty

Cisco Catalyst C9300-NM-2Q= network module has two 40G slots with a QSFP+ connector in each slot The switch supports one hot-swappable network module that provides uplink ports to connect to other devices. The switch should only be operated with either a network module or a blank module installed. The switch generates logs when you insert or remove a network module with SFP/SFP+/SFP28 ports..Network module is great for data networking to provide secure user experience and high performance.This module has two 40G slots with a QSFP+ connector in each slot.If you use a 40G QSFP module, the ports default to 40G interfaces; in this case, the 10G interfaces are displayed but not used.The switch can operate without a network module, but a blank module (with no ports or SFP slots) is available and should be installed when uplink ports are not required.Removing and installing a network module can shorten its useful life, do not remove and insert a network module more often than is necessary.Do not remove the network module with connected cables or installed pluggable transceiver modules; always remove any cable and module before you remove the network module.Supported only on Cisco Catalyst 9300 series switches

This switch is a next generation rack mount hardened switch with 136Gbps switching capacity. It provides (24) 10/100/1000 PoE+ ports, (4) 100/1000 dual speeds SFP ports, It has additional (4) 1G/10G SFP+ slots..IPv4/IPv6 dual protocols.Supports Jumbo Frame up to 9K bytes.Authentication - RADIUS, TACACS+.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

The SISPM1040-582-LRT is a full managed PoE++ switch suitable for connecting and powering devices in hardened environment. It has (8) 10/100/1000 PoE++ ports with (2) 100/1000 dual speed SFP slots. The switch can supply up to 90 Watts per port on four ports or 60 Watts per port on eight ports simultaneously. The switch also includes the embedded Device Management System (DMS) software that provides the advanced tools necessary for total management of all IP addressable devices. The unique DMS provides security integrators with lower overall cost, less downtime and easier management of the entire PoE+ network. Transition Networks' hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other challenging environments..IPv4/IPv6 dual protocols.Supports Jumbo Frame up to 9K bytes.Authentication - RADIUS, TACACS+.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

The SISPM1040-362-LRT is a full managed PoE+ switch suitable for connecting and powering devices in hardened environments. The switch can supply up to 30 Watts per port on all four PoE ports simultaneously. The switch also includes the embedded Device Management System (DMS) software that provides the advanced tools necessary for total management of all IP addressable devices. The unique DMS provides security integrators with lower overall cost, less downtime and easier management of the entire PoE+ network. Transition Networks' hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other challenging environments..Store-and-Forward Architecture with 16 Gbps Switching Bandwidth.Supports Jumbo frames up to 9.6K Bytes.Ring Protections: Industry standard G.8032 Ethernet Ring Protection Switching (ERPS), Support G.8031 Ethernet Linear Protection Switching (EPS), Rapid Ring with recovery time less than 20ms.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

Cisco Catalyst C9300-48T-A Ethernet switch with 48-port modular uplinks data only built for ensuring security, IoT, mobility, and policy-based automation from edge to cloud with foundational capabilities cloud. The Cisco Catalyst 9300 series switches are Cisco's lead stackable enterprise switching platform. They are the next generation of the industry's most widely deployed switching platform. Catalyst 9300 series switches form the foundational building block for software-defined access (SD-Access), Cisco's lead enterprise architecture. At up to 480 GB/s, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 series is the first optimized platform for high-density Wi-Fi 6 and 802.11ac Wave 2. It sets new maximums for network scale. These switches are also ready for the future, with a x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch..Ethernet switch with 48-port modular uplinks data only built for ensuring security, IoT, mobility, and policy-based automation from edge to cloud with foundational capabilities cloud.Comes in gray.At up to 480GB/s, these Ethernet switches are a stacking bandwidth solution with the flexible uplink architecture.High wireless scale for Wi-Fi 6 and 802.11ac Wave 2 access points supported on a single switch with select models.CPU complex x86 with 8GB memory and 16GB flash and external USB 3.0 SSD pluggable storage slot (delivering 120GB storage with an option SSD drive) to host containers.USB 2.0 slot to load system images and set configurations.Flexible and dense uplink offerings with 1G, Multigigabit, 10G, 25G, and 40G in the form of fixed or modular uplinks.Leading PoE capabilities with up to 384 ports of PoE per stack, 60W Cisco UPOE, and PoE+.Intelligent power management with StackPower technology providing power stacking among members for power redundancy.Line-rate, hardware-based flexible NetFlow (FNF) delivering flow collection of up to 64000 flows.IPv6 support in hardware, providing wire-rate forwarding for IPv6 networks.Dual-stack support for IPv4/IPv6 and dynamic hardware forwarding table allocations, for ease of IPv4-to-IPv6 migration.IEEE 802.1BA Audio Video Bridging (AVB) is built in to provide a better audio and video experience through improved time synchronization and QoS.Precision time protocol (PTP; IEEE 1588v2) provides accurate clock synchronization with sub-microsecond accuracy making it suitable for distribution and synchronization of time and frequency over network.Software-defined access for faster launch of new business services and significantly improved issue resolution time.Customers with the Network Advantage Stack software feature sets are provided with maintenance updates and bug fixes designed to maintain compliance of the software.Lifetime manufacturer limited warranty; 90-day Cisco technical assistance center support

Supports twisted pair cables for durability and improved signal transfer while ensuring smooth and seamless data transfer.Gigabit Ethernet port for ultra-fast network speeds.With 1000Base-T technology, get up to 1000Mbps data transfer rate over twisted pair cable

The Cisco Catalyst IE3300 rugged series ushers in mainstream adoption of Gigabit Ethernet connectivity in a compact, form-factor, modular switch that is purpose-built for a wide variety of extended enterprise and industrial applications..Managed switch expanded module contains 16 copper (RJ45) 100/1000Mbps ports.Provides secure access for the high-speed applications in the industrial space, and delivers high-speed up to 10 Gigabit Ethernet connectivity in a compact form factor.DIN rail-mountable.User-friendly WebUI allows for easy configuration and monitoring, and eliminates the need for more complex, terminal emulation programs.Power consumption: 12W.Great for extended enterprise deployments in outdoor spaces, warehouses, and distribution centers.Fanless, convection-cooled with no moving parts for extended durability.Alarm I/O for monitoring and signaling to external equipment.Delivers multiple rings and redundant ring topologies for new network configurations.Provides enhanced flow and threat visibility.Enables optimization of the network infrastructure, reduces operation costs, and improves capacity planning and security incident detection.5-year manufacturer limited warranty

Cisco Catalyst 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations. With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access..Rack mountable switch is the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access.Contains 48 PoE+ ports.Enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems.Dimensions: 1.73"H x 17.5"W x 13.8"D.Meets or exceeds IEC 60950-1, UL 60950-1, CAN/CSA C22.2, No. 60950-1, EN 60950-1, AS/NZS 60950.1, Class I Equipment standards.Resiliency with Field-Replaceable Units (FRU) and redundant power supply, fans, and modular uplinks.Flexible downlink options with data, PoE+, or mGig.Operational efficiency with optional backplane stacking, supporting stacking bandwidth up to 160Gbps.UADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure.Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access.Advanced network monitoring using full Flexible NetFlow.Plug and Play (PnP) enabled: a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network.ASIC with programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries.Lifetime manufacturer limited warranty

The Transition Networks® TN-GLC-SX-MM 1000Base-SX Gigabit Ethernet SFP transceiver module is suitable for Gigabit Ethernet switches and routers, fiber channel switch infrastructure, xDSL applications and metro edge switching. This hot pluggable transceiver module with LLC 1000Base-SX interface, transfers data at the rate of 1.25 Gbps up to 550 m distance over multi-mode fiber media at a wavelength of 850 nm. This transceiver module helps to install in any SFP port allowing for 1000Base-SX interface to the network through the SFP connector..Hot-pluggable SFP transceiver module is suitable for Gigabit Ethernet switches, routers, fiber channel switch infrastructure and xDSL applications.Dimensions: 0.33"H x 0.52"W x 2.18"D.Supports multi-mode fiber (MMF) connection media.Interfaces/ports: One LC 1000Base-SX.Ethernet technology: Gigabit Ethernet.Maximum data transfer rate: 1.25 Gbps.Reach: 550 m.Wavelength: 850 nm.Media type supported: Optical fiber.Link budget: 8.5 dB.Power: 3.3 V, Power consumption: 0.66 W.Temperature range: 0 - 70 deg C operating, 40 - 85 deg C storage.Fiber optic cable standard: 62.5/125 u m, 50/125 u m.SFP footprint LC optical transceiver.Has been designed to install in any SFP port while allowing for 1000Base-SX interface to the network through the SFP connector.Meets MSA, IEC-60825, FDA 21, CFR 1040.10 and 1040.11, IEEE 802.3 2003, ANSI X3.297-1977 certifications and standards.Comes with lifetime warranty

EX2300 and EX2300-C Ethernet Switches deliver a compact, high-density, cost-effective solution for small network environments where space and power are at a premium. Featuring a small, 1U footprint, the EX2300 and EX2300-C are ideal for access-layer deployments in micro branches, retail and workgroup environments, and converged network access in larger networks. The EX2300 offers 24 10/100/1000BASE-T ports in a single platform, while the EX2300-C offers 12 10/100/1000BASE-T ports. Both models are available with or without IEEE 802.3af Power over Ethernet (PoE) or 802.3at PoE+ for powering attached network devices. Optional front panel 10GbE uplink ports support connections to higher-layer devices. Both models support Juniper's unique Virtual Chassis technology, enabling up to four of the switches to be interconnected and managed as a single device. Both models can also act as satellite devices in a Juniper Junos Fusion Enterprise deployment, which combines large numbers of access switches into a logical management platform..Features 12 networking ports to easily establish a local network or expand your existing one.Cascade to other network devices through the uplink port to expand your local area network.Supports optical fiber cable to span longer distances and provided high data transmission rates between servers and network components.Optimize the performance of business networks with 10 Gigabit Ethernet connectivity.Supports layer 3 switching for enhanced performance and usability.Managed switch provides a reliable foundation for your network

The Brainboxes SW-508, industrial unmanaged Ethernet switch with eight galvanically isolated ports, looks slim and includes integral DIN rail mount with non-conducting case. The LED on the Ethernet switch box indicates the status of power supply and has a cooling vents in-order to maintain operating temperature. This Ethernet switch will perform effectively in a harsh environment with an extended temperature range of -40degree C to +80degree C. This switch features a redundant dual power input with backup capacity and are perfect for factory floor, vehicles and marine applications..Ethernet switch.Dimensions: 4.5"H x 3.9"W x 1.8"D.Comes in yellow color.Ports: 8 x Fast Ethernet.Network technology: 10/100Base-TX.Layer supported: 2.Form factor: Rail-mountable.Broadcast storm protection, integrated DIN rail mount.Includes quick start guide.Certifications and standards: RoHS, WEEE

This Transition Networks Lantronix eight 10/100/1000Base-T port switch with Auto-MDI/MDIX is an unmanaged multi-port switch that can be used to build high-performance switched networks. This switch is a store-and-forward device that offers low latency for high speed networking. It is designed for the core of the network backbone computing environment to solve traffic block problems at SME (small, medium enterprise) businesses..Eight-port 10/100/1000BASE-T switch with Auto-MDI/MDIX is an unmanaged multi-port switch that can be used to build high-performance switched networks.Eight gigabit ports provide a 16Gbps switching capacity to support edge network installations.Power consumption: 3.5W.Meets or exceeds the LVD, FCC, CE, and UL standards.Supports full and half duplex for 10/100Mbps and full duplex for 1000Mbps.Wire-speed packet filtering and forwarding rate.Supports jumbo frames up to 9KB.5-year manufacturer limited warranty

The Cisco small form-factor pluggable portfolio offers customers a wide variety of high-density and low-power 25 Gigabit Ethernet connectivity options for data center and high-performance computing networks applications. The 25G Modules are based on SFP28 form factor..Transceiver module for MMF.Pull tab comes in beige.Supports a link length of 70/100m on OM3/4 MMF.Requires RS-FEC on the host ports.Maximum power consumption: 1.2W.Wavelength: 850nm.Cable type: MMF.Core size: 50 microns.Modal bandwidth: 2000 OM3/4700 OM4/4700 OM5 on 70/100/100m cable distances.Support FCoE with the appropriate host s/w support.5-year manufacturer limited warranty

+5 to +30 Volt Power Input enables the device to be run from a standard car battery - ideal for in vehicle applications Tough metal casing with removable numbered power terminal for easy wiring Integral DIN mount and slim design provides Ethernet connecti.8 Port 10/100 Mbs Ethernet Switch.Redundant dual power inputs: +5V to +30V DC.Compact design with integral DIN mount.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing

Brainboxes 4 Port industrial unmanaged Ethernet switch operated with AC adapter or USB power source is perfect for factory floor, in vehicle or marine applications. Switch supported with integrated DIN rail mount uses twisted pair media..Dimensions: 3.5"(H) x 4.5"(W) x 0.9"(D).Form factor: Rail mountable.Interface/ports: 4 x RJ-45, 4 x Fast Ethernet network.Layer supported: 2.Network technology: 10/100Base-TX, Media type supported: Twisted pair.Ethernet technology: Fast Ethernet.Input voltage: 5 VDC.Power source: AC adapter, USB.Operating temperature: -30 - +80 deg C.Power consumption: 1.1 W, 220 mA at +5 VDC/36 mA at +30 VDC maximum.Integrated DIN rail mount.Slim footprint case.Includes SW-504 industrial unmanaged Ethernet switch 4 ports, quick start guide.Complaints and standards: CCC-Mark, C-Tick, Microsoft certified Gold Partner, WEEE, RoHS, METL, AEO (C-TPAT).Warranty: Lifetime limited.Brainboxes Industrial unmanaged Ethernet switch with 4 galvanically isolated ports features 10/100Base-TX network technology for added security.

Mellanox SN4700 spine/super-spine offers 32 ports of 400GbE in a compact 1U form factor. It enables connectivity to endpoints at varying speeds and carries a throughput of 25.6Tb/s, with a landmark 8.4Bpps processing capacity. As an ideal spine solution, the SN4700 allows maximum flexibility, with port speeds spanning from 1GbE to 400GbE per port..32 × QSFP‑DD 400GbE ports with breakout support..High‑performance, fully managed Layer 3 data center switch..Up to 400,000 Mbps per port, 12.8 Tbps aggregate capacity..1U rackmount (43.6 × 436 × 515 mm)..Supported (v1, v2c, v3 with secure authentication)..Advanced traffic prioritization, congestion management, and lossless Ethernet..Managed via Cumulus Linux/Onyx with SSH, RADIUS, TACACS+, and automation tools..12.8 Tbps switching, full‑duplex, VXLAN, BGP‑EVPN, MPLS, MLAG, ECMP..~300–400W typical with redundant hot‑swappable PSUs and adaptive power scaling..IEEE 802.1Q, IEEE 802.3, RoHS, CE, FCC, UL compliance.

Industrial Ethernet 4 Port unmanaged switch. Galvanically Isolated Ethernet Ports capable of 10/100 Mbps. Industrial temperature range of -40°C to +80°C (-40°F to 176°F) and dual input redundant power supply with wide voltage range means it can be powered from USB or on the 24V factory floor. Power terminal is removable with numbered pins for easy wiring. Power consumption is optimised based on the status of the link device. No software required. Ideal for embedded applications..4 Port Ethernet Switch.Ready for embedded applications.Redundant dual power inputs: +5V to +30V DC.IEEE 802.3at standard-compliant-60 W

At Aruba, we believe that the most dynamic customer experiences happen at the edge. Our mission is to deliver innovative solutions that harness data at the edge to drive powerful business outcomes. Aruba is where top athletes in every field are advancing the future of mobile and digital. At our core is a customer first, customer last philosophy. We focus on Innovation that is revolutionizing digital experiences in places where we work, learn, shop, travel, and enjoy free time. We are the biggest small company in our industry. Our mission is to be the Edge-to-Cloud platform upon which our customers innovate in the mobile, IoT, and cloud era..Four-port 10GbE SFP+ module is an accessory for the Aruba 3810M.Contains four 10GbE SFP+ ports.Dimensions: 2.92"H x 5.15"W x 1.09"D.Product weight is 0.38 lbs..Contains SFP+ module.Weight: 0.37 lbs.

18312606ba85f9c38ee17cfae1fedfb7.Access Control Lists (ACLs).D-Link Safeguard Engine protects the CPU from broadcast/multicast/unicast flooding.Port Security supports up to 64 MAC addresses per port.ARP Spoofing Prevention.Smart IP-MAC-Port Binding.DHCP Server Screening.Web-based Graphical User Interface - Standard Mode or Surveillance Mode.D-Link Network Assistant Utility.Simplified CLI through Telnet.Built-in SNMP MIB for remote NMS (D-View 7.0)

Industrial Compact Ethernet 5 Port unmanaged switch. Galvanically Isolated Ethernet Ports capable of 10/100 Mbps. Industrial temperature range of -40°C to +80°C (-40°F to 176°F) and dual input redundant power supply with wide voltage range means it can be powered from USB or on the 24V factory floor. Power terminal is removable with numbered pins for easy wiring. Power consumption is optimised based on the status of the link device. No software required. Ideal for embedded applications..5 Port Ethernet Switch.Ready for embedded applications.Redundant dual power inputs: +5V to +30V DC.Ultra-low light

The Grandstream GWN7813 is a high-performance Layer 3 managed network switch designed for medium-to-large enterprises seeking scalable, secure, and intelligent networking. Equipped with 24 Gigabit Ethernet ports and 4 10G SFP+ uplink ports, it delivers a total switching capacity of 128Gbps and non-blocking throughput of 64Gbps. Advanced features include dynamic routing (RIP, OSPF, BGP), 4K VLAN support, IGMP/MLD snooping, and comprehensive QoS for traffic prioritization. Security is reinforced with ARP inspection, IP source guard, DoS protection, port isolation, and MAC authentication. The GWN7813 supports stacking of up to 4 devices and integrates seamlessly with Grandstream’s GDMS Networking and GWN Manager platforms for centralized cloud or on-premise management. With PoE++ support on ports 1–8, it powers IP phones, cameras, and access points efficiently. Designed for desktop, wall, or rack mounting, and backed by enterprise-grade reliability, the GWN7813 is ideal for building robust business networks..Features 24 Gigabit ports and 4 10G SFP+ uplinks in a managed Layer 3 switch.Powers PoE/PoE++ devices with smart dynamic allocation on ports 1–8.Delivers 128Gbps switching capacity and 64Gbps non-blocking throughput.Mounts easily on desktop, wall, or rack with included hardware.Supports SNMP v1, v2c, and v3 for remote monitoring and diagnostics.Prioritizes traffic using advanced QoS with multiple queue scheduling modes.Secures networks with 802.1X, MAC auth, DoS protection, and DHCP snooping.Enables dynamic routing with RIP, OSPF, BGP, and policy-based controls.Reduces power use with energy-efficient Ethernet and fan/power monitoring.Complies with FCC, CE, RCM, IC, and UKCA certifications for global deployment

The Axis Communications® T8516 managed PoE+ network switch is an easy to use 16 channel managed Ethernet switch that is optimized for surveillance solutions. The switch has web graphic user interface that provides a graphical overview of all connected devices in the system. This allows you to manage connected devices, reboot cameras in the system, cable diagnostics and to monitor the network traffic..PoE+ network switch is perfect for efficient network management.Number of ports: 18.Security: Password protection, IP address filtering, HTTPS encryption, IEEE 802.1X network access control, ACL, Private VLANs, DHCP snooping.Dimensions: 1.73"H x 17.4"W x 8.31"D.Input power: 100 - 240 VAC, 50/60 Hz, Max 285 W, output power: PoE - IEEE 802.3af/at Type 2 Class 4, Max power budget - 240 W.Meets CE, EAC, SASO, EN 55032 Class A, EN 55024, FCC Part 15 Subpart B Class A, ICES-003 Class A, RCM, VCCI Class A, KCC, ANATEL, JATE standards.Network function: DHCP and NTP server included, VLAN.Jumbo frames: 9216 bytes.MAC table: 8 K.Throughput: 26.8 Mpps, switching capacity: 36 Gbps.Supported protocols: IPv4, IPv6, HTTP, HTTPS, QoS, Bonjour, UPnP, SNMP v1/v2c/v3, DNS, NTP, TCP, UDP, IGMP, ICMP, DHCP, ARP, SSH, STP, RSTP, MSTP.Connectors PoE ports: RJ45 10BASE-T/100BASE-TX/1000BASE-T (port 1 - 16), combination ports: RJ45/SFP 100BASE-TX/1000BASE-T (port 17 - 18).Form factor: Desktop or rack-mountable.Includes installation guide, power cord, 19" ear rack kit, rubber feet (4x), SFP dust cover (2x).Weight: 6.1 lbs..Comes with 3 year warranty

This Brainboxes Industrial SFP Gigabit Ethernet Switch is a fast, low cost, future-proof way to deploy long network segments. Connect to wide variety of fibre optic and copper cable types. It provides high speed data connection over extended distances. Support techologies to reduce susceptibility to electromagnetic interference.Unmanaged switch with 4 x gigabit Ethernet, and 1G SFP ports.Integral DIN mount and slim design takes up minimal cabinet space.Power Consumption: 3.6W Max: 720mA@+5VDC/120mA@+30VDC.Meets or exceeds UL62368-1, CSA C2.22, RoHS standards.Industrial temperature range: -40ºF to +176ºF - works in extreme conditions.Jumbo Frame support up to 9K frames.SFP Port Power Overcurrent protection.Lifetime limited warranty

Fast, low-cost, future-proof way to deploy long network segments. Connect to a wide variety of fibre optic and copper cable types for high-speed data connection over extended distances. Galvanically Isolated Ethernet Ports. Automatic detection of data transmission speed: 10/100/1000 Mbps. Wide temperature range of -14ºF to +140ºF and dual input redundant power supply with wide voltage range means it can be powered from USB or on the 24V factory floor. Power terminal is removable with numbered pins for easy wiring. Power consumption is optimised based on the status of the link device. No software required. Ideal for factory floor, in vehicle and marine applications..Unmanaged switch with 4 x gigabit Ethernet, and 1G SFP ports.Integral wall mount or optional DIN rail mount.Power Consumption: 3.6W Max: 720mA@+5VDC/120mA@+30VDC.Meets or exceeds UL62368-1, CSA C2.22, RoHS standards.Industrial temperature range: -14ºF to +140ºF - works in extreme conditions.Jumbo Frame support up to 9K frames.SFP Port Power Overcurrent protection.Lifetime limited warranty

A network switch is a fundamental hardware device that serves as the central connection point for multiple devices within a local area network (LAN), such as computers, printers, wireless access points, and servers. It acts as an intelligent controller, enabling these connected devices to communicate with each other efficiently and share information. Unlike older networking devices like hubs, which simply broadcast all data to all ports, a switch uses packet switching technology. When a data packet arrives at one of its many ports, the switch examines the packet's destination Media Access Control (MAC) address and intelligently forwards it only to the specific port where the destination device is connected. This directed approach ensures efficient data transfer, boosts overall network performance, and makes effective use of available bandwidth by allowing simultaneous, full-duplex communication. Modern switches often incorporate Power over Ethernet (PoE) technology, which can deliver both data and electrical power over a single Ethernet cable. This capability is highly beneficial for deploying equipment like security cameras, VoIP phones, and IoT sensors in locations where separate power sources are impractical or unavailable. Switches are key building blocks in both small office/home networks and large, complex data centers, facilitating reliable and secure wired connectivity for a vast range of modern applications. Network administrators can manage and configure these devices to set up VLANs, prioritize traffic with Quality of Service (QoS), and implement security features like MAC filtering..The switch includes 48 Gigabit Ethernet ports and 4 dual-speed 1G/10G SFP+ uplink slots, offering enterprise-grade performance with full Layer 2 and Layer 3 management for advanced network control.Supports IEEE 802.3af and 802.3at PoE+ standards with a total power budget of up to 820W, making it ideal for powering IP cameras, wireless access points, and VoIP phones.All 48 ports deliver Gigabit Ethernet connectivity, complemented by 10 Gigabit uplinks through SFP+ slots for high-speed data transfer across demanding applications.Designed as a 1RU rack-mountable switch.Supports SNMP v1, v2c, and v3 protocols, ensuring secure and efficient network monitoring and management.Advanced QoS features include 8 hardware queues with strict priority and weighted round-robin scheduling, optimizing traffic for voice, video, and data applications.Management options include Web GUI, CLI, Telnet, and SSH, along with security features such as RADIUS, TACACS+, SSL, and port-based MAC security for enhanced protection.Delivers a switching capacity of 176Gbps and supports operational modes like static Layer 3 routing, VLAN segmentation, and IGMP snooping for multicast traffic.Consumes approximately 15.4W and incorporates IEEE 802.3az Energy Efficient Ethernet technology to reduce power usage during low traffic periods.Compliant with IEEE networking standards and environmental certifications such as RoHS, REACH, and WEEE for safe and sustainable operation.5 Years Manufacturer's Warranty

Reliability, security, and affordability continue to be priorities, while ongoing management and operations add additional complexity that takes time and resources..Type of Ethernet Switch: Gigabit Managed Network Switch with SFP.No. & Type of Ports: 16-Port.System Management: Managed.Rack-Mountable Design.Dimensions (W x D x H): 17.3 x 8 x 1.7".Power Consumption: 11.4 W.Standards & Certifications: WEEE.Design as applicable: Rack-Mountable Design.3 Year Warranty.From connectivity to cloud applications, networking plays a crucial role in every business journey.

Elevate your enterprise network with the Grandstream GWN7822P, a high-performance Layer 3 multi-gigabit managed switch designed for medium-to-large businesses. Featuring 24 Gigabit ports—including 8 ultra-fast 2.5G ports—and 4 SFP+ uplinks, it delivers blazing 80Gbps switching capacity for seamless data flow. Smart PoE/PoE+/PoE++ power control supports up to 240W total output, ideal for powering IP phones, cameras, and access points. Advanced security protocols, ACL filtering, and built-in QoS ensure secure, prioritized traffic management. With support for IPv4/IPv6, stacking capabilities, and flexible management via embedded controller, GDMS, CLI, or GWN Manager, the GWN7822P offers unmatched scalability and control..24 Ethernet ports, multi-gigabit speed, and fully managed Layer 3 switching..Powers devices via dynamic PoE/PoE+/PoE++ with up to 240W total output..80Gbps switching capacity for high-speed enterprise networking..Built for rack mounting, ideal for structured and scalable network setups..Enables SNMP v1/v2c/v3 for advanced network monitoring and control..Prioritizes traffic intelligently using built-in Quality of Service (QoS)..Secures access with ACL filtering, 802.1X, MAC auth, and AAA protocols..Supports stacking, link aggregation, and dual boot for resilient operations..Optimizes power use with smart control and optional redundant power supply..Meets FCC, CE, RCM, and IC compliance standards for global deployment.

The Grandstream GWN7832 is a high-performance Layer 3 aggregation switch designed for enterprise-grade deployments. Featuring 12 SFP+ 10G ports, it delivers up to 240Gbps switching capacity and 178.56Mpps forwarding rate, ideal for handling peak network loads. Advanced VLAN segmentation, IGMP/MLD Snooping, and built-in QoS ensure optimized traffic flow and performance. Robust security features—including ARP inspection, IP source guard, and DoS protection—safeguard your infrastructure. With support for IPv4/IPv6, stacking, and dual power redundancy, the GWN7832 offers scalable reliability. Managed via Web GUI, CLI, SNMP, or Grandstream’s cloud platforms, it provides centralized control and simplified maintenance for modern business networks..Aggregates 12 SFP+ ports with Layer 3 managed switching for enterprise networks..Up to 240Gbps switching and 178.56Mpps forwarding rate..Mounts on desktop, wall, or rack with included kits..SNMP v1/v2c/v3 enables remote monitoring and diagnostics..Built-in QoS prioritizes traffic with advanced shaping and scheduling..Secures networks with ACL, 802.1X, MAC auth, and DoS protection..Operates with stacking, link aggregation, and dynamic routing protocols..Reduces power use via efficient PSU and surge protection..Complies with FCC, CE, RCM, IC, and UKCA standards.

The Aruba CX 6400 Switch Series is a modern, flexible and intelligent family of modular switches perfect for access, aggregation and core in enterprise campus and data center deployments. Created for game‑changing operational efficiency with built-in security and resiliency, the 6400 switches provide the foundation for high-performance networks supporting IoT, mobile and cloud applications..48-port line module for compatible Aruba CX 6400 switch series.Features 48 x 1GbE Class 4 PoE ports.Powered by a Quad Core ARM CortexTM A72 1.8GHz CPU and 8GB DDR4 memory.Features 16MB packet buffer memory

The Aruba CX 6400 Switch Series is a modern, flexible and intelligent family of modular switches perfect for access, aggregation and core in enterprise campus and data center deployments. Created for game‑changing operational efficiency with built-in security and resiliency, the 6400 switches provide the foundation for high-performance networks supporting IoT, mobile and cloud applications..48-port line module for compatible Aruba CX 6400 switch series.Features 48 x 1GbE Class 4 PoE ports and 4 x SFP56 ports.Minimum dimensions ( H x W x D): 1.7" x 12.4" x 17.3"

Cisco™ 100Base-X small form-factor pluggable is optically interoperable with respective 100Base-X ethernet that interfaces on the same link. Plug has max transfer distance of 32810' and optical wave length of 1310 nm..1 x LC duplex 100Base-LX10.Optically interoperable with respective 100Base-X Ethernet interfaces on the same link.Connectivity technology: Wired.Dimensions: 0.3"(H) x 0.5"(W) x 2.2"(D), Form factor: Hot swappable.Max transfer distance: 32810', Optical wave length: 1310 nm.Temperature: 32 -122 deg F operating.Data transfer rate: 100Mbps fast ethernet, Connectivity media: G.652 micrometer single mode optical fiber.Compatibility: Catalyst 2960, 2960-24, 2960-48, 2960G-24, 2960G-48, 2960S-24, 2960S-48, 3560, 3560-12.Application/usage: Data networking.Interchangeable with other 100BASE-X SFPs on the same line card.Certification and Standards: IEEE 802.3, IEEE 802.3ah.Cisco™ 100BASE-LX10 SFP XCVR module is a pluggable device that operates on ordinary multimode fiber-optic link and is a hot-swappable input/output device that plugs into fast ethernet ports.

23536d54ffebbb303c45b74406501462.Features 48 networking ports to meet the requirements of the most demanding workgroups.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.Gigabit Ethernet port for ultra-fast network speeds.Supports layer 3 switching for enhanced performance and usability.Management capability provides control over setup and configuration of your network.Built-in power supply to ensure all components are being supplied with accurate voltage.Rack mounting enables you to organize wires & secure cables for professional installation

The Aruba 2930M Switch Series is designed for customers creating digital workplaces that are optimized for mobile users with an integrated wired and wireless approach. These Layer 3 access switches are easy to deploy and manage with advanced security and network management tools like Aruba ClearPass Policy Manager and Aruba AirWave. With support from cloud-based Aruba Central, you can quickly set up remote offices with little or no IT support. A powerful Aruba ProVision ASIC delivers performance and value with support of the latest SDN apps with future proof programmability for tomorrow's applications. High performance modular stacking for up to 10 switches provides pay as you grow scalability and simplicity. The 2930M supports 10GbE and 40GbE uplinks, Dual Modular Power Supplies, up to 1440 Watts of PoE+, models with 24 ports of HPE Smart Rate multi-gigabit Ethernet, robust QoS, RIP, Access OSPF routing, Tunnel Node, PIM, VRRP and IPv6 with no software licensing required. The Aruba 2930M Switch Series provides a convenient and cost-effective access switch solution that can be quickly set up with Zero Touch Deployment. The switches include a Limited Lifetime Warranty. FEATURES AND BENEFITS: Software-defined networking: OpenFlow supports OpenFlow 1.3 specifications to enable SDN by allowing separation of the data (packet forwarding) and control (routing decision) paths. Unified Wired and Wireless ?: ClearPass Policy Manager supports unified wired and wireless policies using Aruba ClearPass Policy Manager. Switch auto-configuration automatically configures switch for different settings such as VLAN, CoS, PoE max power, and PoE priority when an Aruba access point is detected. User role defines a set of switch-based policies in areas such as security, authentication, and QoS. A user role can be assigned to a group of users or devices, using switchbased local user role or download from ClearPass. Tunnel Node provides a secure tunnel that transports network traffic on a per-port or per-user role basis to an Aruba Controller. In a per-user role Tunnel Node, users are authenticated by the ClearPass Policy Manager which directs traffic to be tunneled to an Aruba controller or switch locally. HTTP redirect function supports HPE Intelligent Management Center (IMC) bring your own device (BYOD) solution. Quality of Service (QoS): Traffic prioritization (IEEE 802.1p) allows real-time traffic classification into eight priority levels mapped to eight queues. Layer 4 prioritization enables prioritization based on TCP/UDP port numbers. Class of Service (CoS) sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ. Rate limiting sets per-port ingress enforced maximums and per-port, per-queue minimums ?. Large buffers Provide graceful congestion management..Features 48 networking ports to establish large network.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network.Supports optical fiber cable to span longer distances and provided high data transmission rates between servers and network components.Gigabit Ethernet port for ultra-fast network speeds.Supports layer 3 switching for enhanced performance and usability.Management capability provides control over setup and configuration of your network.Built-in power supply to ensure all components are being supplied with accurate voltage.Rack mounting enables you to organize wires & secure cables for professional installation

The HP® 24 ports plug-in expansion module is compatible for use with 5400R zl2 switch series. It has 20 x RJ-45 ports and 1000Base-T Network LAN interfaces for quick data transfer. This module is perfect for data networking applications. The expansion module offers 1 Gb/s maximum data transfer rate and supports twisted pair media..Expansion module is suitable for data networking.Has 24 RJ-45 1000Base-T network LAN ports for connectivity.Data transfer rate: 1 Gbps.Dimensions: 1.8"H x 10.3"W x 8.1"D.REACH and Green Compliant.Form factor: Plug-in.Media type supported: Twisted pair, Ethernet technology: Gigabit Ethernet.Suitable with 5400R zl2 series switch.Contains a module.Weight: 1.74 lbs.

055204f6a69f94130dbae780b5757299.Features 24 networking ports to meet the requirements of the most demanding workgroups.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.Optimize the performance of business networks with 10 Gigabit Ethernet connectivity.Supports layer 3 switching for enhanced performance and usability.Managed switch provides a reliable foundation for your network.Built-in power supply to ensure all components are being supplied with accurate voltage.The desktop installation makes it ideal for deployments outside the wiring closet

Cisco™ 100Base-LX10 rugged SFP module has wavelength of 1310 nm and is compatible with Cisco™ IE 3000 series switches. Module is used in data networking and has single-mode optical fiber 100Base-LX10 media connectivity..Dimensions: 0.3"(H) x 0.5"(W) x 2.2"(D).For Cisco IE 3000 series switches.Hot-swappable when deployed, the switch or router does not have to reboot.Interfaces/ports: 1 x LC duplex 100Base-LX10.Application/usage: Data networking.Data transfer rate: 100 Mbps fast ethernet.Connectivity technology: Wired.Form factor: Hot-swappable.Connectivity media: Single-mode optical fiber 100Base-LX10.Wavelength: 1310 nm.Max transfer distance: 6.2 miles.Operating temperature: -40 - 185 deg F.Supports the Cisco quality ID feature that enables the switch or router to identify whether or not the SFP is a Cisco qualified SFP.Compliant and standards: IEEE 802.3, IEEE 802.3ah.Warranty: 90 days limited.Cisco™ 100Base-LX10 rugged SFP module operates on ordinary single-mode fiber-optic link that spans up to 10 km long and has hot-swappable form factor.

The SW-505-8P-R includes eight 1-Gigabit PoE+ Ethernet ports, two non-PoE Ethernet Ports, and two 1-Gigabit SFP expansion ports. Both 1 Gb SFP ports can be aggregated for a connection speed of up to 2 Gb. The 8 PoE+ ports deliver both gigabit data and power over a single cable to 802.11af/at-compliant devices, with a maximum of 30W per port. For separately powered devices, these ports deliver network connectivity only. The total power budget is 130W for all PoE+ ports combined. The advanced Layer 2/Layer 3 features an easy-to-use management interface that simplifies configuration and make this switch ideal for use in single-switch AVoIP environments. Setup of IGMP/Multicast on a per-port basis is easy, improving the setup and reliability of running audio and video over the network simultaneously. This model also features a fanless design and is perfect for conference rooms, offices, or theaters where silent operation is needed. Watch Video: Meet our SW Series Managed PoE+ Switches.1Gb L2/L3 Managed Switch, EU Power Cord.Dante and AES67 compatibility, AV-over-IP compatible.Dimensions Height 1.75 in, Width 9.52 in Product Weight 5.5 lbs..Color Black, Material Metal.Selling Quantity 1.Refreshed, simplified user interface.Layer 2/Layer 3 capabilities (static routing included).Multicast/IGMP snooping and querying feature.Per port unregistered flooding.802.1Q VLAN and QoS support including DCSP.Dante and AES67 compatibility

HP? J9822A Managed switch with 4GB of standard memory and 16MB flash memory for high-computing operation. This rack mountable switch has input voltage of 120 VAC/230 VAC. Comes with 12 switching and management expansion slots. Supports layer 3 for effective communication over the network..Switch for office-core deployments.Measures 12.1" x 17.5" x 17.8".Features manageable switch for easy configuration.Has rack-mountable configuration and operating voltage of 120 - 230 VAC.Has freescale P2020 dual core at 1.2 GHz, 16MB flash, 1GB SD Card, 4GB DDR3 SODIMM memory.Has 1000MB latency less than 2.9 micros, 10 Gb/s latency less than 2 micros and throughput up to 785.7 Mpps.Has 12 open module slots and supports a maximum of 96 10GbE ports for flexibility.Has routing/switching capacity of 1 Tbps, switch fabric speed of 2 Tbps and 7U compatible rack unit.Features intelligent management center, command-line interface, web browser, configuration menu and out-of-band management.Has SNMP v1/v2c/v3, sFlow, CLI, DHCP, VLAN, web based management, telnet.Has operating temperature range of 32 - 113 deg F operating, -40 - 158 deg F storage, Humidity of 15 - 95percentage for precise operation.Includes 5406R zl2 switch, 1 x 5400R zl2 management module (J9827A), 1 x 5412R zl2 switch fan tray (J9832A), mounting kit.Meets Safety: CSA 22.2 No. 60950, UL 60950, Emissions: FCC part 15 Class A, EN 55022 standards.Weighs 17.28 kg.Comes with lifetime limited warranty.HP® Managed switch has routing/switching capability of 1 Tb/s and switch fabric speed of 2 Tb/s. With unprecedented flexibility, this switch is perfect for office-core deployments.

The HP® 8 ports plug-in expansion module is compatible for use with 5400R, 5406R and 5412R switch series. It has 10GBase-X network technology for quick data transfer. This module is perfect for data networking and optical network applications. The expansion module offers 10 Gb/s maximum data transfer rate and supports optical fiber media..Expansion module is suitable for data networking, optical network.Has eight RJ-45 1000Base-T network LAN and eight SFP+ ports for connectivity.Data transfer rate: 1 Gbps.Dimensions: 1.8"H x 10.3"W x 8.1"D.Form factor: Plug-in.Media type supported: Twisted pair, optical fiber, Ethernet technology: Gigabit/10 Gigabit Ethernet.Suitable with 5400R, 5406R, 5412R series switch.Weight: 1.65 lbs..Silver

HP® 5400R ZL2 Management module is an ideal choice to offer improved open flow performance. Module enhances PoE+ capability to all ports simultaneously and offers a faster backplane..Dimensions: 1.4"(H) x 8.13"(W) x 10.3"(D).Includes: HP 5400R zl2 management module (J9827A).Weight: 1.05 lbs..Warranty: Lifetime limited.HP® 5400R ZL2 Management module enables you to monitor and manage power environments through comprehensive control of UPSs.

HP® 5406R ZL2 Managed 4U rack-mountable switch has IMC, web-browser, configuration menu and RJ-45 ethernet out-of-band management protocols. Switch has input voltage rating of 120 - 230 VAC and latency of 1000 Mb..Dimensions: 6.9"(H) x 17.5"(W) x 17.8"(D).Form factor: 4U rack-mountable.Management protocols: IMC, web-browser, configuration menu, out-of-band management (RJ-45 Ethernet), SNMP manager, out-of-band management (serial RS-232C or Micro USB).Memory: 16MB flash, 1GB SD card, 4GB DDR3 SODIMM.Power: 120 - 230 VAC input.Latency: 1000 Mb latency: < 2.9 microsecond, 10 Gbps latency: < 2.0 microsecond, Throughput: 392.8 Mbps.Expansion slot: 6, Expansion slot type: Switching module, management module.Processor: Freescale P2020 dual core at 1.2 GHz.Temperature: 0 - 45 deg C (operating), Humidity: 15 - 95%.Includes: 5406R zl2 switch, 1 x 5400R zl2 management module (J9827A), 1 x 5406R zl2 switch fan tray (J9831A), mounting kit.Certifications and standards: CISPR 22 Class A, CISPR 24, CSA 22.2 No. 60950, EN 60950, EN 61000-3-2, EN 61000-3-3, EN 61000-4-11, EN55022 Class A, EN55024, FCC Class A certified, FCC Part 15.Weight: 24.5 lbs..Warranty: Lifetime limited.HP® 5406R ZL2 Managed 4U rack-mountable switch has 16MB flash, 1GB SD card and 4GB DDR3 SODIMM memory to enhance robust data processing capabilities.

The Cisco 10GBASE SFP+ module gives you a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications..Transceiver module gives you a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications.Comes in gray.Power consumption: 0.1W.Compact 10G form factor for great density per chassis.Hot-swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch (no need to power down if installing or replacing).Supports “pay-as-you-populate” model for investment protection and ease of technology migration.Digital optical monitoring for strong diagnostic capabilities.Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link.5-year manufacturer limited warranty

Dell EMC SFP-10G-LR Compatible SFP+ Module - 10GBASE-LR - 10GbE Single Mode Fiber SMF Optic Transceiver - 10GE Gigabit Ethernet SFP+ - LC 10km - 1310nm - DDM (SFP10GLREMST).100% DELL EMC SFP-10G-LR COMPATIBLE SFP+ TRANSCEIVER: Designed, programmed and tested to work with compatible Dell EMC switches and routers to deliver dependable 10GbE connectivity.LIFETIME WARRANTY: Backed by a lifetime warranty on the life of the module itself - not the life of your switch. Our modules won't void your OEM warranty and supported by our Tech Advisors 5/24..TECHNICAL SPECS: 10GBASE-LR | 10Gbps | Single Mode (SMF) | LC Connector | 1310nm | Digital Diagnostic Monitoring (DDM) | Distances up to 10km (6.2mi).TESTED FOR OEM HOST COMPATIBILITY: Hot-swappable in Dell EMC routers and switches; DDM support reports the transceiver's status to most SNMP network management tools.WORKS WITH MSA COMPLIANT SWITCHES: Also works with switch models from Ubiquiti, D-Link, Netgear, Supermicro, TP-Link and more that accept uncoded modules.10 Gbps | Single Mode Fiber | LC | 10 km (6.2 mi) | Lifetime Warranty

The HP® 20 ports plug-in expansion module is compatible for use with 5400R zl2 switch series. It has 20 x RJ-45 ports and 1000Base-T Network LAN interfaces for quick data transfer. This module is perfect for data networking and optical network applications. The expansion module offers 10 Gb/s maximum data transfer rate and supports twisted pair as well as optical fiber media..Expansion module is suitable for data networking, optical network.Has 20 RJ-45 1000Base-T network LAN PoE+ and 4-port 1G/10GbE SFP+ with MACsec v3 zl2 interface for connectivity.Data transfer rate: 1 Gbps.Dimensions: 1.8"H x 10.3"W x 8.1"D.REACH and Green Compliant.Form factor: Plug-in.Media type supported: Twisted pair, optical fiber, Ethernet technology: Gigabit/10 Gigabit Ethernet.Suitable with 5400R zl2 series switch.Contains a module.Weight: 2.05 lbs.

The HPE Aruba Networking CX 6400 Switch Series is a modern, flexible, and intelligent family of AOS-CX modular switches ideal for enterprise campus and data center deployments. With a cloud-centric design that combines a fully programmable OS with NAE, the CX 6400 extends industry-leading monitoring and troubleshooting across the network. Powerful HPE Aruba Gen7 ASIC architecture delivers fast, non-blocking performance so your network is ready for tomorrow's unpredictable demands..Used for centralized control, configuration, and monitoring of Aruba CX 6400 Series network switches..Fully compatible with Aruba 6400 Series switches, including models 6405 and 6410..Measures approximately 1.75″ (H) x 8.7″ (W) x 10.5″ (D), designed to fit Aruba CX 6400 Series switch chassis..Features a green exterior with durable metal and high-grade plastic construction for reliable performance in enterprise environments.