Network Power Supplies

Tripp Lite PDU1220T Power Distribution Unit, 120 VAC Input/Output.Single phase NEMA L5-20P 4.57m 20A 120 VAC input.50/60 Hz frequency.Outlet connector: 13 x NEMA 5-15R, NEMA 5-20R.Cord length: 15'.Output voltage: 120 V, Overload protection: 20 A.Number of power cords: 1.PDU input voltage 100, 120, 127V, Voltage compatibility: 120 VAC, power rating: 20.Dimensions: 1.75"(H) x 17.5"(W) x 4.5"(D).Outlets center to center measurement: 30.2mm.Style: Rackmount, vertical rackmount, wallmount/under counter, Management: Browser, CLI, SNMP, serial or IP.1U horizontal rackmount format installs in one rack space, back panel grounding lug, high quality design includes rugged all-metal housing and secure rackmount installation with included mounting accessories.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall mount and under counter installation formats.Supplies equipment with continuous power from any protected UPS, generator or mains input power source.Compatibility: Distribution of UPS, generator or commercially derived AC power to protected equipment.Package contents: PDU1220T rackmount power strip, instruction manual and warranty information.Certifications and standards: Tested to UL60950-1 (USA), CSA-C22.2 (Canada), cUL, ROHS.Weight: 5.2 lbs..Warranty: 5 years limited.Tripp Lite Power Distribution Unit - Consolidate Your Power Source

APC Smart-UPS SMX3000LVNC 120 V UPS with Network Card.2700 W UPS with network Card protects your equipment in case of power outages or power fluctuations.Sealed lead acid battery offers a run time of 6 mins at full load on a recharge time of 3 hrs..Dimensions: 17"H x 7.01"W x 19.02"D.Output voltage of 120 V to ensure adequate power supply.LED indicators for on line, on battery, replace battery, overload and multi-function LCD status and control console aid in seamless navigation.4U rack or tower mountable form features 1 x NEMA L5-30R, 6 x NEMA 5-15R, 3 x NEMA 5-20R receptacles.Equipped with 9 outlets, a 1 x Management (USB) - 4 pin USB Type B, 1 x Management (RS-232) - pin D-Sub (DB-9) and NEMA L5-30P plug for seamless connectivity.Leakproof battery provides optimum security.8.01' cord allows you to set up your system at a comfortable distance.BSMI, CSA, EN 50091-2, EN 55022 Class A, ENERGY STAR (USA), FCC Part 15 Class A, NOM, TUV, UL 1778, VCCI Class A, REACH, RoHS compliant.3-year warranty.The APC SMX3000LVNC 120 V Smart-UPS with Network Card helps you maintain power by switching instantaneously to batteries, in the event of a power failure, or even during minor power fluctuations.

A rack/tower UPS with double-conversion topology, the CyberPower Smart App Online OL2200RTXL2U provides sine wave output to mission-critical applications and equipment requiring seamless power protection. This model comes with an extendable LCD control panel, Smart Battery Management charging design, Fast Charge Technology, and energy-saving GreenPower UPS ECO Mode. The OL2200RTXL2U offers generator compatibility and delivers clean AC power with zero transfer time. This model can use the BP72V60ART2U Extended Battery Module for expanded runtime and faster restoration of full backup power with Fast Charge Technology. The OL2200RTXL2U comes with a three-year warranty (including batteries) and a $400,000 Connected Equipment Guarantee..On-line UPS protects electronic equipment with 7 outlets for seamless connectivity.Power Capacity: 2200VA; Output Power Capacity: 1800 W.Surge energy rating: 1335 Joules.Provides USB connectivity for maximum flexibility.9.84' cord allows you to set up your system at a comfortable distance.Charge time: 4 hours.Output voltage of AC 100, 110, 115, 120, 125 V to ensure adequate power supply.Rack-mountable / external form makes it convenient to install and use.Lead acid battery ensures efficient performance.Meets or exceeds RoHS, CSA C22.2 No. 107.3, UL 1778, and FCC Part 15 A standards.Dimensions: 3.5"H x 17"W x 23.6"D.3-year manufacturer limited warranty

A compact UPS with standby topology, the CyberPower Ecologic EC550G provides battery backup (using simulated sine wave output) and surge protection for desktop computers, workstations, networking devices, and home entertainment systems. During power interruptions, the EC550G offers reliable power protection and battery backup. When the battery backup detects that the computer is off or in sleep mode, computer peripherals connected to the ECO Mode, surge protected outlets will be automatically turned off, reducing power usage and lowering energy costs (USB connection required)..UPS protects electronic equipment and prevents data loss during a power outage with 8 outlets for seamless connectivity.Power Capacity: 550VA; Output Power Capacity: 330 W.Surge energy rating: 526 Joules.Provides USB connectivity for maximum flexibility.4.9' cord allows you to set up your system at a comfortable distance.Charge time: 8 hours.Output voltage of 120 VAC to ensure adequate power supply.External form makes it convenient to install and use.Lead acid battery ensures efficient performance.Meets or exceeds RoHS, DOC-B, cUL, FCC, and UL 1778 standards.Dimensions: 3.1"H x 10.6"W x 5.9"D.3-year manufacturer limited warranty

The Tripp Lite PDUV30HV 5/5.8 kW single-phase basic PDU supports 30 A maximum capacity at 208/240 V. It features 10' attached line cord with L6-30P input plug and 32 C13 as well as six C19 outlets that support up to 38 directly connected pieces of networking equipment. Switch-free unfiltered electrical pass-through of this PDU, distributes UPS or generator power to critical networking equipment. This PDU has circuit breaker to protect from overloads and short circuit fault conditions. It comes with mounting brackets for vertical installation in standard 2 and 4 post racks or other surfaces..Single phase NEMA L6-30P 10 ft 30 A 208/240 V input.208/240 V 50/60 Hz output.6 IEC-C19, 32 IEC-C13 outlet connector.Outlets are arranged in two separately breakered load banks each with 15 A overload protection.0U vertical rack mount.Package includes PDUV30HV 63.75 inch basic PDU with owner's manual, set of 2 plug retention brackets and installation hardware, set of mounting brackets and installation hardware.Maximum input amps (A) details: Agency de-rated to 24A.Sleeved circuit breaker assembly prevents accidental shutoff and requires no tools to reset if tripped.Switch-free unfiltered electrical pass-through reliably distributes UPS or generator power to critical networking equipment.Included cord retention brackets keep vital network equipment plugged in and continuously powered.Toolless mounting supported in button-mount compatible racks.Included nut and bolt mounting brackets support installation in non button-mount compatible racks and other flat surfaces.Vertical rack mount, wall mount, raceway, workbench style.Form factors supported: 0u vertical installation in equipment racks, plus under-counter and wall mount.Typical applications: Ideal for network configurations where a basic non-metered, unswitched PDU is required to distribute UPS or generator power to multiple pieces of networking equipment.Certifications: Tested to UL60950-1 (USA, Canada), NOM (Mexico).8 lbs.63 3/4"(H) x 2 1/4"(W) x 3 3/4"(D).Lifetime limited warranty.TRIPP LITE IEC-C13/IEC-C19 32/6 Outlet 30 A 208 - 240 V Basic Power Distribution Unit offers real-time local reporting of load level in amps via built-in digital display.

Tripp Lite Single phase basic power distribution unit has NEMA 5-20P enclosure to offer added protection and can be 1U/0U vertical rack mounted. Unit has NEMA 5-15R outlet connector and offers 15 A overload protection..Single phase NEMA 5-20P 15' 20 A 120 V nominal input.120 V 50/60 Hz output.Outlet connector: 13 NEMA 5-15/20R.Overload protection: 20 A.1U/0U vertical rack mount.Package includes: PDU1220 rackmount power strip, warranty information, instruction manual.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Back panel nut and bolt grounding lug.Reversible housing; 4 1/2" depth.Typical applications: Internetworking, PC systems, telecommunications, audio/video, security, sound reinforcement and more. Ideal for distribution of UPS, generator or commercially derived AC power to protected equipment.Dimensions: 1 3/4"(H) x 17 1/2"(W) x 4 1/2"(D).limited lifetime mfr. warranty.Tripp Lite Sigle Phase Basic Power Distribution Unit offers reliable rackmount power distribution. It supplies equipment with continuous power from any protected UPS, generator or mains input power source.

TRIPP LITE 5-15R 8 Outlet 15 A 100 - 127 V Switched Power Distribution Unit provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Switched PDU features include individually controllable output receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. It enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. The ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. The front input LED's display primary or secondary power availability..Single phase NEMA 5-15P 12 ft 15 A 100 - 127 V input.120 V 60 Hz output.8 NEMA 5-15R outlet connector.1U horizontal rack mount form factor.Package includes PDU with attached 5-15P input power cord, detachable C13 to NEMA 5-15P 12 ft/3.6m secondary input cord, installable 1U mounting brackets, user manuals with warranty information.Visual meter reports output power consumption in amps.ATS features provide redundant power for critical network equipment with a single input power cord.Switched PDU features enable programmable or real-time power control of individual outlets via built-in network interface.Advanced ATS configurations using separate mains circuits, backup generators and out of phase utility feeds are fully supported.2-7 millisecond transfer time between primary and secondary inputs.Front panel LEDs confirm power availability on primary/secondary inputs and each output receptacle.ATS configurations enable hot-swappable UPS protection when used with a single UPS and redundant UPS protection when each input is connected to a separate UPS system.On-board processor evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or of lower quality than the primary source.Outlets are factory programmed for sequential turn-on at 250 millisecond intervals as the PDU is first energized.Typical applications: ATS PDU systems provide a redundant power option with individual outlet control for single-corded network devices.DHCP/Manual configuration support, supports HTTP, HTTPS, PowerAlert network management system, SMTP, SNMPv1, SNMPv2, Telnet, SSH, FTP, DHCP, BOOTP, NTP protocols.Certifications: Tested to UL 60950-1 (USA, Canada), Class A (Emissions), NOM (Mexico), RoHS compliant.11 lbs.1 3/4"(H) x 17 1/2"(W) x 14 1/2"(D).2 years limited warranty.TRIPP LITE 5-15R 8 Outlet 15 A 100 - 127 V Switched Power Distribution Unit's ATS features provide redundant power for critical network equipment with a single input power cord.

This 1U rackmount uninterruptible power supply (UPS) provides battery backup power and surge protection for connected equipment including servers, network devices, workstations, and telecom installations. Additional features include automatic voltage regulation (AVR) to correct minor fluctuations in utility power without switching to battery mode and a multifunction LCD to keep you informed about power conditions. The UPS also offers remote management capabilities with an optional network management card. The Smart App LCD OR500LCDRM1U comes with a three-year warranty (including coverage of batteries) and a $300,000 lifetime connected equipment guarantee..Surge energy rating: 1030 Joules.Equipped with 6 surge-protected outlets for seamless connectivity (4 battery-connected).Product Dimensions are 17.05"W x 1.75"H x 9.25"D with a Cord Length of 10 ft (3.0 m)..Multifunction LCD Panel - Displays immediate, detailed information on the UPS battery and power conditions, alerting users to potential problems before they can affect critical equipment and cause downtime..This UPS has a Runtime of 3 min at Full Load and a Runtime of 12 min at Half Load. The Nominal Input Voltage is 120 VAC using an input plug type NEMA 5-15P..Meets or exceeds UL1778, cUL 107.1, FCC DOC Class B, RoHS, ENERGY STAR standards.UPS protects electronic equipment and prevents data loss during a power outage.Featuring serial interface for communication and management, this UPS provides surge protection and filtering for RJ11/RJ45 (in/out combo) ports and coax lines (in/out).Automatic Voltage Regulation (AVR) - Provides clean, consistent AC power by automatically increasing (boosting) low voltage without using battery power when incoming utility power experiences minor fluctuations..Warranty: 3 Year Limited Warranty.Keep valuable electronics safe and prevent data loss during utility power problems with the Smart App LCD OR500LCDRM1U from CyberPower, your trusted ally in power.

The CyberPower OR700LCDRM1U Smart App LCD UPS provides battery backup (using simulated sine wave output) and surge protection for department servers, workgroup servers, workstations, network devices, and telecom installations..Battery Backup - Supplies power long enough for equipment to properly shut down when utility power fails. Helps prevent loss of data and minimizes the component stress caused by a hard shutdown..Surge Protection - Diverts excess voltage away from sensitive electronic equipment during an AC power surge or power spike to prevent damage..Data Line Protection - Prevents power surges that travel through telephone and Ethernet lines from causing damage to electronics..Line Interactive Topology - Exists when a line interactive UPS has an autotransformer that regulates low voltages (e.g., brownouts) and over voltages (e.g., spikes) without having to switch to battery..Automatic Voltage Regulation (AVR) - Provides clean, consistent AC power by automatically increasing (boosting) low voltage without using battery power when incoming utility power experiences minor fluctuations..Simulated Sine Wave Output - Uses pulse wave modulation to generate a stepped, approximated sine wave to supply cost-effective battery backup power for equipment that does not require sine wave output..GreenPower UPS™ Bypass Design - Is a patented design that allows utility power to bypass the UPS transformer, when AC power is stable, which reduces energy consumption, noise, and heat buildup..Multifunction LCD Panel - Displays immediate, detailed information on the UPS battery and power conditions, alerting users to potential problems before they can affect critical equipment and cause downtime..ENERGY STAR - This model is an ENERGY STAR® Qualified Uninterruptible Power Supply (UPS) system. ENERGY STAR is the trusted, government-backed symbol for energy-efficient products and practices that help save money and protect the environment..The CyberPower OR700LCDRM1U Smart App LCD UPS provides power protection for department and workgroup servers, workstations, network devices, and telecom equipment.

Deliver reliable high‑density rack power with this 1U 20‑Outlet Rackmount PDU, designed for enterprise, AV, and IT environments that require secure and scalable power distribution. Equipped with sixteen IEC C13 outlets and four IEC C19 outlets, it supports a wide range of equipment while offering both front and rear access for optimized cable management. Each C19 outlet and every group of four C13 outlets is protected by dedicated 15A circuit breakers, preventing overload damage and ensuring continuous uptime for critical systems. The built‑in 8 ft (2.4 m) power cord provides flexible installation, while included mounting brackets support horizontal or vertical deployment in standard 19" EIA‑310 racks. Constructed from rugged powder‑coated SPCC steel and TAA‑compliant, this PDU delivers dependable 240V power for demanding workloads in data centers, server rooms, and edge deployments..Operates as a single‑phase 240V rack PDU..Accepts 240V AC input for high‑power use..Protects with 15A breakers for each outlet group..Fits a 1U rack footprint for dense cabinets..Connects using IEC C13 and C19 power inputs..Supplies sixteen C13 and four C19 outlets..Supports a total of twenty output ports..Includes an 8 ft cord for extended reach..Ships with screws, washers, and cage nuts..Meets UL 1363 and EIA/ECA‑310‑E standards..2‑year manufacturer warranty.

APC® Power distribution unit has a input voltage rating of 200/208/230 VAC and output voltage rating of 200/208/230V. Power distribution unit offers active metering and includes a temperature/humidity sensor port..IEC-320 C20 20A 200V, 208V, 230V input.50/60 Hz frequency.Outlet connector: 18 x IEC 320 C13, 2 x IEC 320 C19.Black.Output voltage: 200 V, 208 V, 230 V.Maximum total output current draw per phase: 16 A, Maximum line current per phase: 20 A.Dimensions: 902 mm(H) x 56 mm(W) x 44 mm(D).Operating environment/ relative humidity/ elevation: -5 - 45 deg C/ 5 - 95%/ 0 - 3000 m, storage temperature/ relative humidity/ elevation: -25 - 65 deg C/ 5 - 95%/ 0 - 15000 m.Protocols: SNMP, telnet.Remote management capabilities, local current monitoring display, alarm thresholds, load indicator LED.Integrates with infrastruxure central, flash upgradeable, wide range of input and output connections.Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers.Certifications and standards: CSA C22.2 No. 60950, IEC 60950, METI denan, UL 60950-1, VDE, RoHS, REACH(contains no SVHCs), battery directive.Weight: 6.46 lbs..Warranty: 2 years repair or replace.Metered rack 2G 208/230V 20/16A power distribution unit provide power utilization data to allow data center managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership.

APC® Basic power distribution unit featuring NEMA 5-20R outlet connector can be 1U horizontal rack mounted and includes rack mounting brackets. Unit offers NEMA L5-20P input connections and has input current rating of 20 A..NEMA L5-20P 12' 20 A 100 - 120 V input.120 V 50/60 Hz output.Outlet connector: 10 NEMA 5-20R.1U horizontal rack mount.Includes: Installation guide, rack mounting brackets.0 - 95% operating relative humidity.0 - 95% storage relative humidity.Operating/storage elevation: 0 - 10000'/0 - 50000'.Certifications: cUL recognized, CSA, UL 1363, UL recognized, RoHS complaint.Weight: 5.50 lbs..Dimensions: 1.75"(H) x 17.60"(W) x 2.25"(D).2 years limited Mrf. warranty.APC® AP9564 Basic Power Distribution Unit (PDUs) allows user to distribute power outlets to rack-mount equipment.

Keep your equipment running during a power outage with an APC BN700MC 700VA UPS that features a rechargeable battery to provide up to 62 minutes of power. The 5' power cord allows flexible placement..Power-Saving Back-UPS NS.8-outlet.420W/700VA output capacity.120V.3-years repair or service

APC AP9567 Basic Rack PDU I=includes installation guide, rack mounting brackets, toolless mounting kit..Nominal Output Voltage 120V.Maximum Total Current Draw per Phase 15A.Nominal Input Voltage 100V, 120V.2 years repair or replace warranty.2 years repair or replace warranty.Includes: installation guide, Rack Mounting brackets, Toolless Mounting Kit.Units do not require additional tools to mount into APC netshelter enclosure, which allows the users to quickly and easily mount units in the rear of the enclosure.Easily mounts vertically in racks or enclosures and occupies zero U of valuable rack space, which allows more equipment in the rack. Units that mount vertically are optimized to fit in a NetShelter enclosures.0 - 95% operating relative humidity.0 - 95% storage relative humidity.Operating/storage elevation: 0 - 10000'/0 - 50000'.Weight: 4.8 lbs..Dimensions: 24"(H) x 1.76"(W) x 1.76"(D).2 years limited Mrf. warranty.APC® AP9567 Basic Power Distribution Unit (PDUs) allows user to distribute power outlets to rack-mount equipment.

Optimize energy usage with this power distribution unit. A load indicator LED helps protect against overloading circuits by issuing warnings based on alarm parameters you can customize as needed. With a rack-mountable design, this unit can be secured horizontally or vertically, providing easy access to equipment. Featuring a compact design, this power distributor is easy to tuck out of the way for a tidy appearance. The branch whip lets multiple devices receive power at the same time. This APC metered rack power distribution unit is flash upgradeable, letting it download changes and improvements from the network and keeping it up to date for optimal performance..Metered rack PDU provides active metering to enable energy optimization and circuit protection.208V three-phase power, input frequency: 50/60Hz; maximum total current draw per phase: 48A.Dimensions: 72"H x 2.2"W x 2"D, weight: 20.9 lbs..Input connection: 4-pin IEC-309 connector, maximum input current is up to 48A UL.Output connections: 6 IEC-320-C13 and 12 IEC-320-C19 outlets.USB port allows for firmware upgrades, CAN ports enable data transfer for future expansion options.Provide real-time remote monitoring of connected loads, user-defined alarms warn of potential circuit overloads before critical IT failures occur.Features real power monitoring, temperature/humidity sensor port, locking IEC receptacles, and ultra-low-profile circuit breakers.2-year manufacturer limited warranty.Provide circuit protection with this APC metered rack-mountable power distribution unit.

The Tripp Lite PDUMH30HVNET 5.8 kW single-phase digital switched metered PDU supports 30 A maximum capacity at 208/240 V. It features L6-30P input plug and 16 C13 switched outlets arranged in two separately breakered eight outlet banks. Visual and remote current monitoring of this PDU, tracks the current for each eight outlet bank separately. This 2U rackmount PDU comes with cord retention bracket to plug and power vital network equipment. It provides advanced network control and monitoring with turn on/off, recycle or lock-out power to each individual receptacle, monitor site electrical conditions as well as remotely monitor output power consumption..Power distribution unit offers reliable and cost effective power distribution.Dimensions: 3 1/2"(H) x 17 1/2"(W) x 12 1/2"(D).Metal construction for long lasting durability.Receptacles: one NEMA L6-30P input and 16 x IEC 320 EN 60320 C13 output.Voltage: 208/240 VAC input/output at 50/60 Hz, Input current: 30 A.Output capacity: 5.8 kW.Input cord length: 12'.Form factor: Horizontal (1U, 2U).Offers overload protection.Front panel LEDs: 16 power availability LEDs confirm power off/on status for each built-in outlet.Storage temperature: 5 - 122 deg F (-15 - 50 deg C), Relative humidity: 5 - 95 percent non-condensing, Operating elevation: 0 - 10000'.Offers programmable or real-time outlet power control via built-in web/network monitoring and control card.Management: Protocols- HTTP, HTTPS, PowerAlert network management system, SMTP, SNMPv1, SNMPv2, Telnet, FTP, DHCP, BOOTP and NTP.The 2U rack mount switched PDU has digital current monitoring, remote control and temperature/humidity monitoring capability.Assures ability to turn on, turn off, recycle or lock-out power to each individual outlet easily.Contains rackmount PDU and 4-post compatible mounting brackets.Meets UL 60950-1 (USA, Canada), Class A (Emissions), RoHS, TAA and NOM (Mexico) standards or certifications.Weight: 13.8 lbs..Comes with 2 years limited warranty

The Tripp Lite PDUMNH20 single-phase monitored PDU with eight outlets, reports voltage, frequency and load level through Ethernet interface. It features lighted display that continuously reports output power consumption in amps. This PDU supports HTTP, HTTPS, PowerAlert network management system, SMTP, SNMPv1, SNMPv2, SNMPv3, Telnet, SSH, FTP, DHCP, BOOTP and NTP protocols. It offers real-time clock backup to maintain the time of day and date. The 10/100 Mbps auto-sensing feature of this PDU, allows optimal communication with 10/100 Base-T networks..Single-phase monitored PDU SmartOnLine SU2200RTXL2Ua, SU2200RTXLCD2U, SU2200XLCD, SmartPro SM2200RMDVTAA, SMART2200CRMXL UPS.Dimensions: 1.7"H x 17.3"W x 6.2"D.Metal construction for durable use.Output receptacles: Eight NEMA 5-15/20R, Input receptacles: NEMA L5-20P.Input voltage: 120 VAC, Output voltage: 120 VAC, Input current: 20 A.Frequency required: 50/60 Hz, Power rating: 1.9 kW.Cable length: 12'.Management protocols: HTTP, HTTPS, PowerAlert Network Management System, SMTP, SNMPv1, SNMPv2, Telnet, FTP, DHCP, BOOTP, NTP.Form factor: Horizontal rackmount.Front panel LCD display: Digital meter reports PDU output current in amps.Storage temperature: 5 to 122 deg F, Relative humidity: 5 - 95 percent non-condensing, Operating elevation: 0 - 10000'.Tiered access privileges allow an administrator and a guest to login via web browser.Built-in SNMP/Ethernet interface reports voltage, frequency and PDU loading via network or secure web browser interface using user specified alarm.Supports DHCP/manual configuration and 10/100 Mbps auto-sensing for optimal communication with 10/100 Base-T networks.Contains plug retention plates, rack mount brackets, owner's manual, L5-20R to 5-20P adapter.Meets Tested to UL 60950 (USA), CSA (Canada), Class A (Emissions), NOM (Mexico), RoHS compliant certifications and standards.Weight: 7 lbs..Comes with 2 years limited warranty

A compact UPS with standby topology, the CyberPower Ecologic EC750G provides battery backup (using simulated sine wave output) and surge protection for desktop computers, workstations, networking devices, and home entertainment systems. During power interruptions, the EC750G offers reliable power protection and battery backup. When the battery backup detects that the computer is off or in sleep mode, computer peripherals connected to the ECO Mode, surge protected outlets will be automatically turned off, reducing power usage and lowering energy costs (USB connection required)..UPS protects electronic equipment and prevents data loss during a power outage with 12 outlets for seamless connectivity.Power Capacity: 750VA; Output Power Capacity: 450 W.Surge energy rating: 526 Joules.Provides USB connectivity for maximum flexibility.4.9' cord allows you to set up your system at a comfortable distance.Charge time: 8 hours.Output voltage of 120 VAC to ensure adequate power supply.External form makes it convenient to install and use.Lead acid battery ensures efficient performance.Meets or exceeds RoHS, DOC-B, UL 1778, cUL, and FCC standards.Dimensions: 3.1"H x 12.2"W x 7"D.3-year manufacturer limited warranty

The PDUMNV30HV2LX 5.8kW Single-Phase Monitored PDU provides real-time remote monitoring of voltage, frequency and load levels via built-in network connection. By reducing the frequency of on-site visits, these advanced remote capabilities can save you money and reduce downtime. The 0U PDU features 42 outlets (36 C13 and 6 C19) with included plug-lock insert sleeves to prevent cables from becoming accidentally disconnected. A 10-foot cord with NEMA L6-30P plug connects the PDU to a compatible AC power source, generator or protected UPS. The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP. A digital ammeter allows you to monitor each load bank's current and the total connected PDU load in real time to ensure they remain well below maximum capacity with no danger of overload. The PDU mounts in 0U of space in EIA-standard 19-inch racks using the included toolless mounting buttons or the included rack-mounting brackets. Use the included PDUMVROTATEBRKT kit to install the unit with outlets facing the rear for better airflow or equipment access..42 outlets-36 C13, 6 C19-with plug-lock insert sleeves.Built-in Java-free LX Platform interface for remote access 24/7.Digital ammeter for on-site load monitoring in real time.NEMA L6-30P input with 10 ft. AC power cord

APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power cycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing time delays allow users to define the order in which to power up or down attached equipment to avoid circuit overload. Current metering provides real-time remote monitoring of connected loads with user-defined alarms to warn of potential circuit overloads. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, Command Line Interface, or Telnet Interfaces which are complimented by APC Centralized Management platforms using StruxureWare Data Center Expert, Operations, Capacity, and Energy Efficiency. New AP8000 series Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, and locking IEC receptacles..Environmentally Friendly: Yes.Environmental Certification: RoHS, REACH.Input Voltage: 120 V AC

The CyberPower SL700U uninterruptible power supply (UPS) system provides surge protection for lightning-induced surges and other power events that can damage electronic equipment. This unit delivers enough battery backup to connected devices during a utility power failure, so you can perform a graceful shutdown to protect against the loss of data and damage to valuable electronics including computers, gaming consoles, and home networking equipment. The SL700U has two Type A USB charging ports with 2.4A shared total output which gives you a faster charging time and can be used while on battery backup power. The slim profile and full-motion power cord allows for discrete installation and keyhole mounting slots allow for wall-mount applications as well. With a $100,000 connected equipment guarantee and a three-year warranty, you can trust CyberPower's commitment to the quality of the SL700U..UPS protects electronic equipment and prevents data loss during a power outage with 8 outlets for seamless connectivity.Power Capacity: 700VA; Output Power Capacity: 370 W.Surge energy rating: 890 Joules.Provides USB connectivity for maximum flexibility.5' cord allows you to set up your system at a comfortable distance.Charge time: 8 hours.Output voltage of 120 VAC to ensure adequate power supply.External form makes it convenient to install and use.Lead acid battery ensures efficient performance.Meets or exceeds FCC DOC Class B, cUL, UL 1778, and CEC standards.Dimensions: 5.4"H x 12.76"W x 2.76"D.3-year manufacturer limited warranty.a href="http://sds.staples.com/msds/24416007.pdf" target="_blank"Safety Data Sheet/a

The HPE hot-plug 3000W power supply with C20 inlet adapter for select Aruba switches..3000W power supply with C20 inlet adapter for select Aruba switches.Input voltage range: 120-230VAC.Meets or exceeds RoHS standard.Compatible with Aruba 6400 Series switches

APC® Basic power distribution unit offers NEMA L6-30P input connections and has input current rating of 30 A. Unit featuring rack mounting brackets can be 1U horizontal rack mounted and offers overload protection up to 24 A..NEMA L6-30P 12' 30 A 200 - 230 V input.208 V 50/60 Hz output.Outlet connector: 10 IEC 320 C13.Overload protection: 24 A.1U horizontal rack mount.Includes: Installation guide, rack mounting brackets, user manual.Enables a quick recovery from overload events.5 - 95% operating relative humidity.5 - 95% s-rage relative humidity.Operating/storage elevation: 0 - 15000'/0 - 50000'.Certifications: cUL listed, CSA, PSE, UL 60950, UL listed, RoHS complaint.Weight: 5.6 lbs..Dimensions: 1.73"(H) x 17.52"(W) x 3.03"(D).2 years limited Mrf. warranty.APC® AP9571A Basic Power Distribution Unit provides reliable power distribution via a single input with multiple output receptacles and distributes power from low amperage single phase circuits to higher-power 3-phase solutions.

The APC® Smart-UPS SRT2200RMXLA-NC 120 V 340 J 2200 VA rack-mountable network card, features multi-function LCD status and control console design. It supports an audible and visible alarm technologies for high performance. This 6' network card has RJ-45 10/100 Base-T, RJ-45 serial, smart-slot and USB interfaces for easy connectivity. It provides early-warning fault analysis, by-passes unused electrical components, text and mimic diagrams that display modes of operation..rack mountable network card has 340 J surge rating.Receptacles: 6 x NEMA 5-20R, 1 x NEMA L5-20R, NEMA 5-20P.Dimensions: 3.35"H x 17"W x 23"D.Input voltage: 120 to 230 VAC, power: 1800 W, runtime: 3 min (full load), 10 min (half load).Meets CSA C22.2 No.107.3-05, ENERGY STAR (USA), FCC Part 15 Class A, OSHPD, UL 1778, RoHS, REACH standards.Technology: Audible and visible alarm.Cable length: 6'.Design: Multi-function LCD status and control console.Interface: RJ-45 10/100 Base-T, RJ-45 serial, smart-slot, USB.Form factor: Tower/rack mountable, topology: Double conversion online.Output: 120 V, 50/60 Hz, power: 1.8 KW, < 2% (voltage distortion), built-in bypass.Battery: Sealed lead acid maintenance free, hot swappable, recharge time: 3 hrs., battery life: 3 to 5 years, Vah capacity: 306.Online thermal dissipation: 535.0 BTU/hour, audible noise: 55 dBA.Features provides early-warning fault analysis, by-passes unused electrical components, text and mimic diagrams that display modes of operation.Protects the initial investment in the UPS when migrating from tower to rack mount environment.Includes software CD, documentation CD, installation guide, network management card, rack mounting brackets, hardware, support rails, USB cable.Temperature: 0 to 40 deg C (Operating), to 20 to -50 deg C (Storage), 0 to 95% (Humidity).Weight: 55 lbs..Comes with 3 year repair or replace warranty

The ATS will maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails, the ATS will switch over to the secondary power source until primary input is restored and stable..Single phase IEC-320 C20 12' 20 A 200 - 240 V input.200 - 240 V 50/60 Hz output.Outlet connector: 8 IEC-C13, 2 IEC-C19.1U horizontal rack mount.Package includes: switch, metered PDU with ATS support, set of 2 C19 to C20 12'/ 3.7 m power cables, user manual with warranty information.2 digit display reports power consumption in amps.ATS circuits normally maintain output sourced from the primary input cable, as primary input power fails, the ATS will switch to maintain output sourced from the secondary input cable until power on the primary input is restored and stable.2 - 7 ms transfer time.Switched outlets and ethernet interface supports individual outlet control on a real-time or programmable basis and user-specified alarm notification thresholds for all reported site power conditions.DHCP/Manual configuration support.Supports HTTP, HTTPS, PowerAlert network management system, SMTP, SNMPv1, SNMPv2, Telnet, SSH, FTP, DHCP, BOOTP, NTP protocols.Outlets are factory programmed for sequential turn-on at 250 ms intervals when the PDU is first energized.LEDs confirm power availability on both input lines and for each output receptacle.Typical applications: Ideal for configurations requiring a simple PDU that displays power consumption in amps.Certifications: Tested to UL 60950 (USA, canada), CE (europe), class A (emissions), NOM (mexico), RoHS complaint.Weight: 10.3 lbs..Dimensions: 1.72"(H) x 17.3"(W) x 14.8"(D).2 years limited Mrf. warranty.Tripp Lite Sigle Phase Switched Power Distribution unit provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources.

APC AP9563 Basic Rack PDU includes installation guide and rack mounting brackets..Nominal Output Voltage 120V.Maximum Total Current Draw per Phase 16A.Nominal Input Voltage 100V, 120V.Contains Lithium Battery.2 years repair or replace warranty.2 years repair or replace warranty.0 - 95% storage relative humidity.Operating/storage elevation: 0 - 10000'/0 - 50000'.Certifications: cUL recognized, CSA, UL 1363, UL recognized, RoHS complaint.Weight: 5.50 lbs..Dimensions: 1.75"(H) x 17.60"(W) x 2.25"(D).2 years limited Mfr. warranty.APC® AP9563 Basic Power Distribution Unit (PDUs) allows user to distribute power outlets to rack-mount equipment.

The Vertiv Geist Basic Rack PDU family delivers reliable power distribution at a competitive price point. The Vertiv Geist Basic Rack PDU is the entry-level solution in the Vertiv Rack PDU family, providing basic, reliable power distribution in all IT environments. Vertiv Geist Basic Rack PDUs are UL-listed, meeting an important requirement for many data centers and insurance providers. Vertiv Geist Basic Rack PDUs are not batch-tested. Every unit is tested individually for reliability and functionality before shipping. All Vertiv Geist Basic Rack PDUs come with a standard three-year warranty with an automatic upgrade to five years if the product is registered within 120 days of purchase. The addition of a local display or inline meter enables instant power usage feedback, which can help avoid overloads and costly downtime. This model (VP9562) is 15A, 120V, 1.4kW in a horizontal form factor, with 10 NEMA 5-15R outlets..The Vertiv Geist Basic Rack PDU provides reliable power distribution at a low price point.All Vertiv Geist Basic Rack PDUs are individually tested for reliability and functionality - no batch tests..Vertiv Geist Basic Rack PDUs are UL listed in accordance with common data center and insurance provider requirements..350 Nit brightness gives an exceptional visible display for clear and consistent on-screen pictures

The APC® Smart-UPS™ SRT3000XLA 3000 VA 120 V dual conversion online UPS offers maximum battery recharge time of 3 hrs. It measures 17" x 3.35" x 25". The lead acid battery UPS has one NEMA L5-30R plug and eight NEMA 5-20R plugs, RJ-45 serial port, SmartSlot as well as USB port for connectivity. The control panel has multi-function LCD status and control console. It has automatic/manual internal bypass and audible/visible alarms that come prioritized by severity. This hot-swappable UPS withstands an operating temperature rating of 0 to 40 deg C. It comes with CD with software, documentation CD, installation guide, removable support feet, USB cable and warranty card..Dual conversion online UPS for power protection.Load capacity: 3000 VA, 2700 W.Dimensions: 17"H x 3.35"W x 25"D.Maximum battery recharge time: 3 hrs..Output voltage: 120 VAC (nominal).Control panel: Multi-function LCD status and control console.Form factor: Tower/rack mountable, hot-swappable batteries.Battery chemistry: Sealed Lead Acid, Replacement battery: APCRBC152, Battery capacity: 454 VAh.Interface: RJ-45 serial, Smart-slot, USB, Receptacles: One NEMA L5-30R, eight NEMA 5-20R.Input connections: NEMA L5-30P, Cord length: 10'.Color: Black, Battery characteristics: Maintenance-free with suspended electrolyte, leak-proof, Emergency power off, Expected battery life: 3 -5 years.Input voltage: 120 VAC (nominal), Output frequency (sync to mains): 50/60 Hz +/- 3 Hz, Input frequency: 40-70 Hz (auto sensing).Waveform type: Sine wave, Surge energy rating: 340 J.Internal bypass (automatic and manual), Audible alarm: Audible and visible alarms prioritized by severity.Temperature: 0-40 deg C, Storage Temperature: -15 to 45 deg C, Relative humidity: 0-95% (operating/storage), Protection class: IP 20.Includes smart-UPS, CD with software, documentation CD, installation guide, removable support feet, USB cable, warranty card.Meets ENERGY STAR, RoHS, REACH, CSA C22.2 No.107.3-05, FCC Part 15 Class A, UL 1778 certifications and standards.Weight: 69 lbs..Comes with 3 years (without battery) and 2 years (with battery) warranty

Tripp Lite Single phase basic power distribution unit has NEMA 5-15P enclosure to offer added protection and can be 1U/0U vertical rack mounted. Unit has NEMA 5-15R outlet connector and offers 15 A overload protection..Single phase NEMA 5-15P 15' 15 A 120 V nominal input.120 V 50/60 Hz output.Outlet connector: 13 NEMA 5-15R.Overload protection: 15 A.1U/0U vertical rack mount.Package includes: PDU1215 rackmount power strip, warranty information, instruction manual.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Back panel nut and bolt grounding lug.Reversible housing; 4 1/2" depth.Typical applications: Internetworking, PC systems, telecommunications, audio/video, security, sound reinforcement and more. Ideal for distribution of UPS, generator or commercially derived AC power to protected equipment.Dimensions: 1 3/4"(H) x 17 1/2"(W) x 4 1/2"(D).limited lifetime mfr. warranty.Tripp Lite Sigle Phase Basic Power Distribution Unit offers reliable rackmount power distribution. It supplies equipment with continuous power from any protected UPS, generator or mains input power source.

The EnGenius EPA5060XBT PoE Injector delivers 60-watts of power and 10Gb data communication to compatible network devices up to 328 feet (100m) over Cat5e cable. Compact design with IEEE802.3bt compliance offers easy installation while providing built-in power protection to preserve valuable equipment. IEEE 802.3bt Type 3 compliant IEEE 802.3af/at backward compatible Backward compatible for legacy PoE Supports 10/100/1000 Mbps and 1Gb/2.5Gb/10Gb applications Output power up to 60W over four pairs with auto-detection on power requirement Leverage energy efficient PoE up to 60W with full power capabilities mount use Fan-less design ideal for silent operation Simple plug-and-play installation.Supports 10Gb data transfer for high-performance networks.Backward compatible with legacy PoE standards.Compact, fanless design for silent operation

The APC Smart-UPS On-Line SRT 3000 VA lead acid rack/tower dual conversion UPS runs on Eco mode to ensure whisper-quite operation and bypasses unused electrical components in good power conditions to achieve high operating efficiency. It has an indicator that shows the battery failure. The LCD graphics display of the UPS shows system parameters and alarms. This flexible UPS is rack or tower mountable. It has high density, double-conversion on-line power protection with scalable runtime. This UPS safeguards connected loads from surges, spikes, lightning and other power disturbances. This UPS uses maintenance-free sealed lead-acid battery with suspended electrolyte that requires 3 hrs. of recharging time..Typical recharge time: 3 hrs..Battery type: Maintenance-free sealed lead-acid battery with suspended electrolyte, leak proof.Dimensions: 17"H x 3.35"W x 25"D.Output: Output power capacity: 2.7 KW/3.0 kVA, Max configurable power: 2.7 KW/3.0 kVA, Nominal output voltage: 208 V.Topology: Double conversion online, Waveform type: Sine wave, Output connections: one NEMA L6-30R, two NEMA L6-20R.Input: Nominal input voltage: 208 V, Input frequency: 40 - 70 Hz, Input connections: NEMA L6-20P, Cord length: 6'.Battery: Included battery modules: 1, Nominal battery voltage: 96 V, Replacement battery: APCRBC152, RBC quantity: 1.Surge energy rating: 340 Joules.Interface ports: Smart-Slot, RJ-45 serial, USB, Available SmartSlot interface quantity: 1.Control panel: Multi-function LCD status and control console, Audible alarm: Audible and visible alarms prioritized by severity.High density, double-conversion on-line power protection with scalable runtime.Battery failure notification provides early warning fault analysis on batteries enabling timely preventive maintenance.Form factor: Tower.Contains CD with software, documentation CD, installation guide, removable support feet, USB cable and warranty card.Operating temperature: 32 - 104 deg F, Operating humidity: 0 - 95 percent, Audible noise at 1 m from surface of unit: 55 dBA.Meets CSA C22.2 No.107.3-05, ENERGY STAR, FCC Part 15 Class A, UL 1778 certifications & standards.Weight: 69 lbs..Comes with 3 years repair or replace warranty and 2 year for battery

Adds PoE Devices to Your LAN Without a PoE Switch: Now you can add a surveillance camera, wireless access point, VoIP phone or other PoE (Power over Ethernet) device to your home or office network, even if your network switch doesn't support PoE. Instead of making an expensive upgrade to a PoE switch, you can use this single-port PoE+ injector to send 30 watts of power, as well as Gigabit Ethernet data, through your existing Cat5e/6/6a cabling. Saves You Time and Money on Unnecessary Equipment Updates: This compact PoE plus injector delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables. That means, in addition to not buying a new PoE network switch, you also don't need to install new AC power lines and electrical outlets. This cost-effective midspan injector sends DC power and Ethernet data through your Ethernet cable, cutting down on cable clutter, equipment costs and installation time and labor. Expand Your Wireless Network Up to 328 ft.: The NPOE-30W-1G delivers both power and data to any IEEE 802.3at (PoE+) or IEEE 802.3af (PoE) device up to 100 meters (328 feet) away. This allows you to install a device in a building lobby, on a ceiling, inside a warehouse or anywhere else an AC power outlet is unavailable. The PoE+ injector supports full-duplex 2 Gbps communication for sending and receiving data simultaneously. It also protects your device against short circuits, overloads and power surges. Simple Plug-and-Play Installation Has Your Device Connected in Minutes: No configuration or software is required to add the NPOE-30W-1G to your LAN. Just connect your switch or network jack to the shielded RJ45 Data port and your PoE device to the shielded RJ45 Power + Data port using existing Cat5e/6/6a cable. Connect the unit's C14 inlet to a NEMA 5-15R outlet using the included power cord. LEDs indicate the unit is receiving power and is ready to transmit data. Designed for Installation Almost Anywhere: Mounting holes are featured for installing the midspan injector on a shelf, desktop, wall or any other smooth surface with user-supplied hardware. The black plastic housing fits in the palm of your hand, so it is small enough to hide away without interfering with your workflow or décor. The fanless design is ideal for silent operation. 3-Year Warranty and Environmentally Responsible Design: The NPOE-30W-1G comes with a 3-year warranty. It's manufactured in compliance with strict RoHS specifications, reflecting Tripp Lite's commitment to environmental responsibility..PoE+ injector uses existing Cat5e/6/6a cable to supply power to a PoE device connected to a non-PoE switch..Saves money by delivering 30W of power + data up to 328 ft. through existing cabling.Extends power + data to any PoE or PoE+ device installed where no AC outlet is available.Supports Gigabit Ethernet data transfer speeds up to 1000 Mbps.Quick and easy plug-and-play installation with no configuration necessary.Compact, hand-sized plastic housing ready for mounting on any smooth surface

The Cisco PWR-IE50W-AC-IEC= expansion power module is compatible with IE-3000-4TC, IE-3000-8TC, IE-3000-4TC-E and IE-3000-8TC-E Cisco switches. This DIN rail mountable expansion power module features one power IEC 320 EN 60320 C14 interface port for reliable connectivity..Expansion power module is perfect for industrial Ethernet applications.Dimensions: 5.8"H x 2"W x 4.4"D.Compatible with IE-3000-4TC, IE-3000-8TC, IE-3000-4TC-E and IE-3000-8TC-E Cisco switches.Form factor: DIN rail mountable.Interface/ports: One Power IEC 320 EN 60320 C14.Power source: 110 - 220 VAC/88 - 300 VDC.Cisco™ Expansion power module is designed for IE-3000-4TC, IE-3000-8TC switches and supports 110/220 VAC input, 24 VDC/2.1A output, IEC plug and DIN-rail mount.

Rack power distribution unit with 100 - 240 V nominal input voltage and 20 A maximum input current..Power distribution unit.Dimensions: 15.28"H x 1.72"W x 3.66"D.Color: Black and silver.Nominal voltage: 100 - 240 V Input, Frequency: 50 - 60 Hz.Input current: 20 A, Regulatory derated input current: 16 A.Input receptacles: IEC-320 C20.Rack height: 1U.Certifications and standards: cUL Listed, CE, EAC, IRAM, PSE, UL Listed, VDE, REACH, RoHS.Weight: 3.3 lbs.2 years repair or replace warranty

Schneider® AP8931 APC® Electric Switched rack power distribution unit with 8 outputs reduce circuit overload during power recovery. Enables power on/off functionality for power recycling to remotely reboot equipment. Includes ultra low profile circuit breakers, real power monitoring, a temperature/humidity sensor port and locking IEC receptacles. Has a nominal input voltage rating of 100/120 V and frequency rating of 50/60 Hz. Operates at a temperature range of -5 to 45 deg C..Power distribution unit enable advanced, user-customizable power control and active monitoring.Measures 988 mm x 55 mm x 46 mm.Comes in black color for new look.Features input voltage rating of 100V, 120V and input frequency of 50/60 Hz for reliable operation.Output voltage rating of 100 V, 120 V and 8 x NEMA 5-15R output connections.Remotely manage outlets so users can turn outlets off.Easily mounts vertically in racks or enclosures and occupies zero U of valuable rack space.Full-featured network management interfaces that offer standards-based management via Web.Operating environment of -5 - 45 deg C, operating relative humidity of 5 - 95% and operating elevation of 0-3000 meters for better performance.Alarm threshold avoids overloaded circuits.Aggregate current draw per rack PDU is displayed on the unit via a digital display.Power delays allow users to configure the sequence in which power is turned on or off for each outlet.LED indicator indicates overload and warning conditions based on the user-defined alarm thresholds.Easily upgrade firmware via network download for future product enhancements.Integrates with StruxureWare data center expert for added flexibility.Single input power source supplies power from one branch whip to multiple pieces of equipment.Meets cUL Listed, FCC Part 15 Class A, ICES-003, PSE, UL 60950-1, UL certification and standards.Weighs 4.16 KG.Comes with 2 years limited warranty.Schneider® Electric Switched rack power distribution unit allows active monitoring and user-customizable power control. Has a nominal output voltage rating of 100/120 V.

High density, double-conversion on-line power protection with scalable runtime: Smart-UPS On-Line provides high density, true double-conversion on-line power protection for servers, voice / data networks, medical labs, and light industrial applications. Capable of supporting loads from 1 to 20kVA in a rack/tower convertible form, the Smart-UPS On-Line is available from 2U to 12U. Recent family extensions at 15 and 20kVA enable support of power hungry blade servers or heavily loaded equipment racks. When business-critical systems require runtime in hours, not minutes, Smart-UPS On-Line can be configured with matching battery packs to comply with aggressive runtime demands. The included PowerChute management software provides unattended graceful shutdown of network operating systems. All models 5kVA and above include an integrated Network Management Card for remote management (optional on models below 5 kVA). The Smart-UPS On-Line family provides customers with a reliable source of uninterruptible power even in demanding power environments, including very wide input voltage window, extremely tight output voltage regulation, frequency regulation, internal bypass, and input power factor correction..Gives you a high level of protection by isolating the equipment from raw utility power.900 W load capacity - backup power for your valuable electronics.1000 VA load capacity provides sufficient backup during power failures.Up to 10 minute runtime on full load to preserve critical data from power shortage interruptions

High density, double-conversion on-line power protection with scalable runtime: Smart-UPS On-Line provides high density, true double-conversion on-line power protection for servers, voice / data networks, medical labs, and light industrial applications. Capable of supporting loads from 1 to 20kVA in a rack/tower convertible form, the Smart-UPS On-Line is available from 2U to 12U. Recent family extensions at 15 and 20kVA enable support of power hungry blade servers or heavily loaded equipment racks. When business-critical systems require runtime in hours, not minutes, Smart-UPS On-Line can be configured with matching battery packs to comply with aggressive runtime demands. The included PowerChute management software provides unattended graceful shutdown of network operating systems. All models 5kVA and above include an integrated Network Management Card for remote management (optional on models below 5 kVA). The Smart-UPS On-Line family provides customers with a reliable source of uninterruptible power even in demanding power environments, including very wide input voltage window, extremely tight output voltage regulation, frequency regulation, internal bypass, and input power factor correction..Offers power supply with zero transfer time taken to the battery and proves ideal for voltage sensitive equipment.1350 W load capacity - backup power for your valuable electronics.1500 VA load capacity - work without any interruption during power outages.Up to 5 minute runtime on full load to preserve critical data from power shortage interruptions

Tripp Lite™ Power distribution unit has a input/output voltage rating of 120 V and frequency rating of 50/60 Hz. Power distribution unit is rack mountable and supplies equipment with continuous power from any protected UPS..Single phase NEMA L5-30P 4.57m 30A 120 VAC input.50/60 Hz frequency.Outlet connector: 24 x NEMA 5-15R.Cord length: 15'.Output voltage: 120 V, Overload protection: 30 A.Number of power cords: 1.Maximum input current: 30 A, PDU input voltage 100, 120, 127 V, Voltage compatibility: 120 VAC, Power rating: 24.Dimensions: 1.75"(H) x 17.5"(W) x 4.5"(D).Outlets center to center measurement: Distance between Front outlets = 30.2mm, Distance between Rear outlets = 30.2mm, TVSS grounding: Back panel nut and bolt grounding lug.Style: Rackmount, vertical rackmount, wallmount/under-counter, Form factor supported: 1U rackmount, 0U vertical rackmount, wall-mount and undercounter installation supported.High quality design includes rugged all-metal housing and secure rackmount installation with included mounting accessories.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Supplies equipment with continuous power from any protected UPS, generator or mains input power source.Package contents: PDU2430 rackmount power strip, warranty information, instruction manual.Certifications and standards: Tested to UL60950-1 (USA) and CAN/CSA C22.2 No. 60950-1-03 (Canada), RoHS compliant.Weight: 3.3 lbs..Warranty: 5 years limited.Tripp Lite Power Distribution Unit - 120V Input/Output Rackmount

Enhance power reliability and organization in your rack environment with this 1U 14‑Outlet Rackmount Power Distribution Unit. Designed for 19" server racks and cabinets, it provides a balanced combination of front‑facing and rear‑facing NEMA 5‑15 outlets to support both quick‑access devices and clean cable routing. The integrated 15A circuit breaker and 3,000‑joule surge protection safeguard connected equipment from overloads and power spikes, while the illuminated, covered power switch prevents accidental shutdowns. Built with durable SPCC steel and featuring an 8 ft (2.4 m) power cord, this TAA‑compliant PDU installs horizontally or vertically, making it an ideal choice for server rooms, AV setups, and IT deployments that require dependable, centralized power distribution..Operates on single‑phase power with a rack‑mount PDU design..Accepts 120V input with standard AC line frequency..Delivers up to 15A of output current for connected equipment..Fits a 1U rack space for compact installation..Uses a NEMA 5‑15 input plug for AC power connection..Provides 14 NEMA 5‑15 outlets across front and rear panels..Supports 14 outlets for high‑density equipment needs..Includes a 7.9 ft power cord for flexible rack placement..Not hot‑swappable for safety and device protection..Ships with brackets, cage nuts, rack screws, and documentation..Meets UL 1363 and EIA/ECA‑310‑E compliance standards..2‑year limited manufacturer warranty.

High density, double-conversion on-line power protection with scalable runtime: Smart-UPS On-Line provides high density, true double-conversion on-line power protection for servers, voice / data networks, medical labs, and light industrial applications. Capable of supporting loads from 1 to 20kVA in a rack/tower convertible form, the Smart-UPS On-Line is available from 2U to 12U. Recent family extensions at 15 and 20kVA enable support of power hungry blade servers or heavily loaded equipment racks. When business-critical systems require runtime in hours, not minutes, Smart-UPS On-Line can be configured with matching battery packs to comply with aggressive runtime demands. The included PowerChute management software provides unattended graceful shutdown of network operating systems. All models 5kVA and above include an integrated Network Management Card for remote management (optional on models below 5 kVA). The Smart-UPS On-Line family provides customers with a reliable source of uninterruptible power even in demanding power environments, including very wide input voltage window, extremely tight output voltage regulation, frequency regulation, internal bypass, and input power factor correction..Offers power supply with zero transfer time taken to the battery and proves ideal for voltage sensitive equipment.900 W load capacity - backup power for your valuable electronics.1000 VA load capacity - work without any interruption during power outages.Up to 10 minute runtime on full load to preserve critical data from power shortage interruptions

The HP® X372 1050 W proprietary power supply works with 3810M 16SFP+, 3810M 24G, 3810M 48G and 3810M models. It measures 1.58" x 3.27" x 8.88". This hot-plug/redundant power supply has input voltage rating of 120 VAC as well as 230 VAC and output voltage rating of 54 VDC..Proprietary power supply aids for reliable operation.Dimensions: 1.58" x 3.27" x 8.88".Compatible with 3810M 16SFP+, 3810M 24G, 3810M 48G, 3810M.Color: Silver.Hot-plug/redundant, Input voltage: 120 VAC, 230 VAC, Output voltage: 54 VDC, Output power: 680 W, Voltage provided: 1050 W.Contains one power supply.Weight: 1.94 lbs.

APC® Power distribution unit has a input voltage rating of 200/208/230 VAC and output voltage rating of 120 V. Power distribution unit comes with rack mounting brackets for easy installation..NEMA L14-30P 8.53m 24A 200 V, 208 V, 230 V input.50/60 Hz frequency.Outlet connector: 12 x NEMA 5-20R.Black.Cord length: 28'.Output voltage: 120 V.Number of power cords: 1.Maximum total output current draw per phase: 24A, maximum line current per phase: 30 A, Load capacity: 5760 VA.Dimensions: 89 mm(H) x 437 mm(W) x 89 mm(D).Operating environment/ relative humidity/ elevation: 0 - 45 deg C/ 0 - 95%/ 0 - 3000 m, storage temperature/ relative humidity/ elevation: -25 - 65 deg C/ 0 - 95%/ 0 - 15000 m.Offers basic rack PDUs that mount veritcally, without tools in the rear channel of a net shelter VX.Package contents: Basic rack 4.992kVA PDU, installation guide, rack mounting brackets.Certifications and standards: cUL listed, CSA C22.2 No. 107.1, UL 1778, UL listed, RoHS,.Weight: 14 lbs..Warranty: 2 years limited.Basic rack 2U 120V power distribution unit mount veritcally, Without tools in the rear channel of a netshelter VX.

Single phase NEMA 5-20P / NEMA L5-20P 12 ft 20 A 100 - 127 V input.120 V 60 Hz output.16 NEMA 5-15/20R outlet connector.1U horizontal rack mount form factor.Package includes PDU with attached L5-20P input power cord, detachable C19 to NEMA L5-20P 12 ft/3.6m secondary input cord, two NEMA L5-20R to NEMA 5-20P plug adapters, installable 1U mounting brackets, user manual with warranty information.Visual meter reports output power consumption in amps.ATS features provide redundant power for critical network equipment with a single input power cord.Switched PDU features enable programmable or real-time power control of individual outlets via built-in network interface.Advanced ATS configurations using separate mains circuits, backup generators and out of phase utility feeds are fully supported.2-7 millisecond transfer time between primary and secondary inputs.Front panel LEDs confirm power availability on primary/secondary inputs and each output receptacle.ATS configurations enable hot-swappable UPS protection when used with a single UPS and redundant UPS protection when each input is connected to a separate UPS system.On-board processor evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or of lower quality than the primary source.Outlets are factory programmed for sequential turn-on at 250 millisecond intervals as the PDU is first energized.Typical applications: ATS PDU systems provide a redundant power option with individual outlet control for single-corded network devices.DHCP/Manual configuration support, supports HTTP, HTTPS, PowerAlert network management system, SMTP, SNMPv1, SNMPv2, Telnet, SSH, FTP, DHCP, BOOTP, NTP protocols.Certifications: Tested to UL 60950 (USA, Canada), Class A (Emissions), NOM (Mexico), RoHS complaint.12.2 lbs.1 3/4"(H) x 17 1/2"(W) x 14 1/2"(D).2 years limited warranty.2 years limited warranty.TRIPP LITE 5-15/20R 16 Outlet 20 A 100 - 127 V Switched Power Distribution Unit's ATS features provide redundant power for critical network equipment with a single input power cord.

The PDUMV30HVNETLX 5/5.8kW Single-Phase Switched PDU provides advanced network control and remote power monitoring with the ability to turn on, turn off, reboot or lock out power to each outlet. Recommended for any IT or industrial application, it features 24 switched outlets (20 C13 and 4 C19). LEDs indicate each outlet's on/off power status. A 10-foot cord with NEMA L6-30P plug connects the PDU to a compatible AC power source, generator or protected UPS. The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP. A digital ammeter allows you to monitor each bank's load in real time to ensure it remains well below maximum capacity with no danger of overload. The PDU mounts in 0U of space in EIA-standard 19-inch racks using the included toolless mounting buttons or the included rack-mounting brackets. Use the included PDUMVROTATEBRKT kit to install the unit with outlets facing the rear for better airflow or equipment access..5/5.8kW 208/240V 30A switched PDU.24 individually controllable outlets-20 C13, 4 C19.Built-in LX Platform interface for remote access.Digital ammeter for on-site load monitoring in real time.NEMA L6-30P input with 10 ft. AC power cord

Power multiple devices efficiently with this 1U 12‑Outlet Rackmount PDU, designed for server rooms, AV environments, and IT deployments requiring organized and reliable power distribution. It features twelve NEMA 5‑15 right‑angle outlets that provide extra spacing to accommodate bulky power adapters without blocking adjacent ports. With six outlets on the front and six on the rear, the unit supports flexible equipment placement while maintaining clean cabling. A built‑in 15A circuit breaker protects connected hardware from overloads, while the illuminated, covered power switch prevents accidental shutoff. The 8 ft (2.4 m) power cord provides extended reach, and the included 4‑way mounting brackets allow horizontal or vertical installation in standard 19" racks at least 4" deep. Constructed from rugged SPCC steel, this TAA‑compliant PDU delivers dependable performance for always‑on IT environments..Runs as a single‑phase rack power distribution unit..Accepts 120V AC input for standard IT deployments..Supports up to 15A of output current..Fits a 1U rack footprint for compact mounting..Uses a NEMA 5‑15 input plug for power delivery..Provides 12 wide‑spaced NEMA 5‑15 outlets..Offers 12‑outlet capacity for dense rack loads..Includes a 7.9 ft cord for flexible positioning..Comes with brackets, screws, washers, and guide..Meets UL 1363 and EIA/ECA‑310‑E standards..2‑year manufacturer warranty.

Includes 1 x 24 outlet PDU, 1 x backing plate, 1 x bag of screws, 1 x mounting bracket.24 outlets.10' cord.Mounts vertically, taking up 0U of rack space.Plug/connector type: 1 x NEMA 5-15P.Receptacles: 24 x NEMA 5-15R.Input voltage: 120 VAC, output: 125 V maximum, Input current: 15 A.Form factor: Rack-mountable.Fits most 42U racks and equipment cabinets.Simple 0U solution for adding power to cramped full sized racks or cabinets where space is at a premium.Dimensions: 72"(H) x 1"(W) x 1.5"(L).Includes 1 x 24 outlet PDU, 1 x backing plate, 1 x bag of screws, 1 x mounting bracket.Certifications: UL, CSA.Weight: 6.6 lbs..Warranty: Lifetime.24 outlet rackmount power strip provides a 0U solution for your rackmount equipment and fits most 42U racks and equipment cabinets.

Featuring a power capacity of 3 kVA for long-lasting reliability, the Liebert MicroPOD power distribution unit offers a continual power supply to effectively run your UPS system. With an output voltage of 120 VAC, this power-distribution unit operates efficiently in temperatures ranging from 32 to 104 degrees Fahrenheit. The Liebert MicroPOD power-distribution unit is rack mountable to ensure an easy installation, and the bypass switch provides uninterrupted power to any micro-UPS system..Size: 3 1/2"(H) x 17"(W) x 3 1/2"(D).Black.For use with: Any brand of UPS system.Connections: 8 x NEMA 5-20R output, NEMA 5-20P input.Power capacity: 3 kVA.Input voltage: 120 VAC single-phase.Output voltage: 120 VAC, 50 Hz, 60 Hz.Current: 16 A output current, circuit breaker: Two 20A fuse.Operating conditions: 32 deg F - 104 deg F temp, 0 to 95% Non-condensing relative humidity, storage: -4 deg F - 140 deg F temp.Form factor: Cabinet, rack-mountable.Status indicators: "Utility/Mains" indicator illuminates amber to indicate that utility/mains power is available for the load and UPS, "UPS" indicator illuminates green to indicate the presence of UPS output power for the load.Normal - The UPS is continuously supplied available utility power by the POD, UPS output power is returned to the POD and distributed to the critical AC load through the POD output receptacles.Maintenance bypass - The bypass switch allows a transfer of the critical AC load from the UPS inverter to the utility source, to allow for service to or replacement of the UPS, without interrupting the load.Bypass switch is capable of switching up to 20 or 30 amps, based on the model of the POD. The switch is a break before make type, with a maximum transfer time of 6ms.Connection to UPS Input: 5-15R, connection to UPS Output & cord length: 5-15P on attached 6 foot cord.Complaint and standards: UL1778, cUL, ISTA Procedure 1A listed, ISO 9001.Package contents: Micro Pod 3kVA PDU, power cord - 10 ft, user manual, brackets for rack mounting.Warranty: 2 years limited.Liebert MicroPOD MP2-120C Power-Distribution Unit - Continual Power Supply

Explore APC Rack Power Distribution in 3D Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power cycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing time delays allow users to define the order in which to power up or down attached equipment to avoid circuit overload. Current metering provides real-time remote monitoring of connected loads with user-defined alarms to warn of potential circuit overloads. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, Command Line Interface, or Telnet Interfaces which are complimented by APC Centralized Management platforms using StruxureWare Data Center Expert, Operations, Capacity, and Energy Efficiency. New AP8000 series Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, and locking IEC receptacles..Network (RJ-45): Yes.Environmentally Friendly: Yes.Environmental Certification: RoHS, REACH