Non-Adhesive Label Holders
7 results
Flip scan label holder features a 2" x1.5" flip scan paper label holder that flips up effortlessly to provide ease of access and retreats into view on release. Holder opens for inclusion of new paper labels..1 1/2"(H) x 2"(W).Works with 's flip scan quick back hook.Labels flip up for easy access and fall back into view when released.Product flexes open for insertion of plain paper labels.Works with Azar's flip scan quick back hook.Flip scan label holder is a 2" x1.5" flip scan label holder is perfect for displaying labels.
Slidemaster Placard Holder for Trucks meets Labelmaster's exacting standards for top quality construction. This slide-in placard holder features Easy-Off Ramp, an innovative device that glides placards over the retaining clip, so they slide in or out without a hitch. Built with rugged riveted assembly, drain hole and stainless steel clip, Slidemaster holders accommodate metal placards and non-adhesive placards in polycoated tagboard and 20-mil rigid vinyl. Featuring superior durability, this full frame, treated .032 anodized aluminum Slidemaster is weather resistant and retards oxidation..Slidemaster holders accommodate metal placards and non-adhesive placards in polycoated tagboard and 20-mil rigid vinyl.Featuring superior durability, this full frame, treated .032 anodized aluminum.Slidemaster is weather resistant and retards oxidation..Built with rugged riveted assembly, drain hole and stainless steel clip
Slidemaster Placard Holder for Trucks meets Labelmaster's exacting standards for top quality construction. This slide-in placard holder features Easy-Off Ramp, an innovative device that glides placards over the retaining clip, so they slide in or out without a hitch. Built with rugged riveted assembly, drain hole and stainless steel clip, Slidemaster holders accommodate metal placards and non-adhesive placards in polycoated tagboard and 20-mil rigid vinyl. Featuring superior durability, this split frame, treated .032 anodized aluminum Slidemaster is weather resistant and retards oxidation. Split frame construction allows two parts of the Slidemaster frame to follow the action of 12" roll-up rear door panels without impediment. Split frame Slidemaster, DOT Placard System is priced per each..Slidemaster Placard Holder for Trucks meets Labelmaster's exacting standards for top quality construction.Featuring superior durability, this split frame, treated .032 anodized aluminum.DOT Placard System is priced per each..Slidemaster is weather resistant and retards oxidation.
The SUPERSCAN Magnetic Rolls can be attached without the application of adhesive, making it non-messy and easy to reposition for reuse. You can cut these magnetic rolls into any length and label them with name, dimensions and pricing information of goods and merchandise using a wet or dry erase marker..Warehouse label rolls for warehouse and shipping stores.White rolls highlight markings made with wet or dry erase markers.Non-adhesive magnetic base keeps it non-messy.Comes in a carton.Material: Magnetic.Size: 4"(W) x 50'(L).Write on/wipe off feature makes moving inventory quick and easy.Reusable labels can be relocated when inventory is moved.Mark with wet or dry erase markers, cut roll to length with scissors.Magnetic labels eliminate adhesive residue clean up.Perfect for labels, signs, job tickets and so much more.Cut roll to length with scissors.The SUPERSCAN 50' x 4" Magnetic Rolls in white can be cut to desired lengths and used as warehouse labels for convenient shipment and inventory control.
Slidemaster Placard Holder for Trucks meets Labelmaster's exacting standards for top quality construction. This slide-in placard holder features Easy-Off Ramp, an innovative device that glides placards over the retaining clip, so they slide in or out without a hitch. Built with rugged riveted assembly, drain hole and stainless steel clip, Slidemaster holders accommodate metal placards and non-adhesive placards in polycoated tagboard and 20-mil rigid vinyl. Full frame, Slidemaster Slide-In Placard Holder comes with baked-on white polyester finish on sturdy .032 aluminum..Top quality construction.Easy-Off Ramp, an innovative device that glides placards over the retaining clip.Slide-In Placard Holder comes with baked-on white polyester finish.White Slidemaster Placard Holder for Trucks
The C Channel Card Holders made of a thick and heavy-duty magnetic material are easy to install on metal surfaces, without any adhesive build-up. These warehouse card holders come with plain white inserts to label your goods or display important information in your store..Magnetic card holders for shipping stores, libraries and metal shelves and racks.Dimensions: 3"H x 6"W.0.06" thick magnetic construction for non-messy adhesion.Includes 25 card holders.C-channel design conveniently clings to rack and shelf edges.Heavy-duty .060 thick magnetic material assures total adhesion without a messy adhesive build-up.Perfect for offices, libraries and warehouse metal shelves or racks.White inserts included.The Magnetic 3" x 6" C Channel Cardholder comes in a pack of 25 and is useful for labeling merchandise or displaying signage in commercial setups.
The Card Holders with a C-channel design are made of a thick and heavy-duty magnetic material and are easy to install on metal surfaces, without any adhesive build-up. These magnetic card holders come with plain white inserts to label your goods or display important information in your store..Channel card holders for shipping stores, libraries and metal shelves and racks.Dimensions: 3"L x 8"W.0.06" thick magnetic construction for non-messy adhesion.Includes 25 card holders.C-channel design conveniently clings to rack and shelf edges.Heavy-duty .060 thick magnetic material assures total adhesion without a messy adhesive build-up.White inserts included.The Magnetic 3" x 8" C Channel Cardholder comes in a pack of 25 and is useful for labeling merchandise or displaying signage in commercial setups.
You May Also Like
MasterVisionĀ® Magnetic Card Holder is self-adhesive and reusable, can maximize your productivity, and organizes your work with efficiency..Magnetic material with slots above and below to hold in cardstock labels..Data cards can be used on any steel surface to label..Easy to move and change data..Trade Act Compliant.ISO9001-2008
Made of stainless steel, the American Metalcraft Menu Holder is corrosion-resistant and offers a long usage life. Its sleek, simplistic design is sure to blend well with the classy decor of desks and dining tables. This stainless steel menu holder comes with a hard-clip design and is strong enough to securely hold onto thin paper, plastic menus, cards and signs..Stainless steel construction with electro-polished finish for long-lasting use.Hard-grip clip holds a strong hold onto a variety of materials.Height: 1.5".The American Metalcraft MH220 1.5"L Stainless Steel Menu and Card Holder features an electro-polished finish, which prevents contamination to a considerable extent.
Slidemaster Placard Holder for Trucks meets Labelmaster's exacting standards for top quality construction. This slide-in placard holder features Easy-Off Ramp, an innovative device that glides placards over the retaining clip, so they slide in or out without a hitch. Built with rugged riveted assembly, drain hole and stainless steel clip, Slidemaster holders accommodate metal placards and non-adhesive placards in polycoated tagboard and 20-mil rigid vinyl. Split frame, Slidemaster Slide-In Placard Holder comes with baked-on white polyester finish on sturdy .032 aluminum. Split frame construction allows two parts of the Slidemaster frame to follow the action of 12" roll-up rear door panels without impediment. Split frame Slidemaster, DOT Placard System is priced per each..Built with rugged riveted assembly, drain hole and stainless steel clip.Split frame construction allows two parts of the Slidemaster frame to follow the action of 12" roll-up rear door panels without impediment.Split frame Slidemaster, DOT Placard System is priced per each..Slidemaster Placard Holder for Trucks meets Labelmaster's exacting standards for top quality construction.
Remember everyone's name at meetings and events with the help of these C-Line name badge kits. Laser- and inkjet-compatible label inserts let you print names, positions, and company information, and the clear name badge holders ensure each label is easy to see. Each holder in this set of C-Line name badge kits comes with a convenient metal clip that affixes to clothing and lanyards for added versatility..Fasten this ID badge holder to clothing, bags, and more to keep your hands free.Swivel clip secures badge to clothing and allows greater versatility.Top-loading design prevents inserts from falling out.Size: 4"W x 3"L.Designed for use with both inkjet and laser printers for optimal versatility.Comes in a box of 96 ID badge holders and 96 cards.Badge holders are made from PVC-free polypropylene.Prepare for meetings, conferences, and conventions with these C-Line name badge kits.
Create categories or name tags with these magnetic card holders. These MasterVision black card holders are 2-inches high and 6-inches long for creating labels that are easy to read in a classroom or boardroom..Magnetic card holder provides an easy solution for labeling and categorization.Black magnets.Dimensions: 2"H x 6"W.Holders come in pack of 10.Insert neat card stock labels into these MasterVision card holders.
Slidemaster Placard Holder, Mill, Full.Placard holder.Easily slide your placards into the Slidemaster.Sold per each.Slidemaster Placard Holder, Mill, Full
Slidemaster Placard Holder for Trucks meets Labelmaster's exacting standards for top quality construction. This slide-in placard holder features Easy-Off Ramp, an innovative device that glides placards over the retaining clip, so they slide in or out without a hitch. Built with rugged riveted assembly, drain hole and stainless steel clip, Slidemaster holders accommodate metal placards and non-adhesive placards in polycoated tagboard and 20-mil rigid vinyl. Split frame, Slidemaster Slide-In Placard Holder comes with a shiny brite mill metal finish on .032 aluminum. Split frame construction allows two parts of the Slidemaster frame to follow the action of 12" roll-up rear door panels without impediment. Split frame Slidemaster, DOT Placard System is priced per each..Easy-Off Ramp, an innovative device that glides placards over the retaining clip.Built with rugged riveted assembly.Priced per each.Slidemaster Placard Holder for Trucks
Extend the life and appearance of your placards with this economical Placard Holder Shield. Constructed of sturdy .030 extruded plastic, this shield helps protect metal, tagboard and rigid vinyl placards from falling or blowing out of their Slidemaster placard holders. The shield also helps to retard deterioration due to harsh weather, dirt and rough road conditions. Clear Plastic Placard Holder Shield is made with rounded corners that permit easy insertion in all Slidemaster Slide-In Placard Holders for trucks. Priced per each..Constructed of sturdy .030 extruded plastic.The shield also helps to retard deterioration due to harsh weather, dirt and rough road conditions..Priced per each..Extend the life and appearance of your placards with this economical Placard Holder Shield.
This Split Frame Spacemaster System includes 8 placard panels in a single frame: Dangerous, Flammable Gas 2, Poison 6, Corrosive 8, Flammable Liquid 3, Oxidizer 5.1, Radioactive 7, Non-Flammable Gas 2, and Blank. These placards meet DOT specifications for transporting hazardous materials. Changing DOT placards when your load changes is as easy as the flip of a panel. Spacemaster eliminates the hassle and expense of replacing placards, so DOT compliance is virtually at your fingertips. Spacemaster frames are constructed of corrosion-resistant, fully formed rigid aluminum that provides superior durability, even under the toughest road conditions. Self-contained placard panels are constructed of aluminum alloy and mill roller-coated with white acrylic paint. Panels lock in place with 4 double-riveted stainless steel pressure fasteners. Legends are silkscreened with UV inks to retard fading, chipping or peeling. Spacemaster Split Frame, 8-Legend Flip Placard System for Trailers is sold per each..Include the following placards: Dangerous, Flammable Gas 2, Poison 6, Corrosive 8, Flammable Liquid 3, Oxidizer 5.1, Radioactive 7, Non-Flammable Gas 2, and Blank..Changing DOT placards when your load changes is as easy as the flip of a panel..Spacemaster eliminates the hassle and expense of replacing placards..Spacemaster Split Frame, 8-Legend Flip Placard System for Trailers is sold per each..This Split Frame Spacemaster System includes 8 placard panels in a single frame: Dangerous, Flammable Gas 2, Poison 6, Corrosive 8, Flammable Liquid 3, Oxidizer 5.1, Radioactive 7, Non-Flammable Gas 2, and Blank.
This White Split Frame Spacemaster System includes 8 placard panels in a single frame: Dangerous Flammable Gas 2 Poison 6 Corrosive 8 Flammable Liquid 3 Oxidizer 5.1 Radioactive 7 Non-Flammable Gas 2 Blank Placards meet DOT specifications for transporting hazardous materials. Changing DOT placards when your load changes is as easy as the flip of a panel. Spacemaster eliminates the hassle and expense of replacing placards, so DOT compliance is virtually at your fingertips. Spacemaster frames are constructed of corrosion-resistant, fully formed rigid aluminum that provides superior durability, even under the toughest road conditions. Self-contained placard panels are constructed of aluminum alloy and mill rollercoated with white acrylic paint. Panels lock in place with 4 double-riveted stainless steel pressure fasteners. Legends are silkscreened with UV inks to retard fading, chipping or peeling. Spacemaster White Split Frame, 8-Legend Flip Placard System for Trailers is sold per each..Spacemaster with the following placards: Dangerous, Flammable Gas 2, Poison 6, Corrosive 8, Flammable Liquid 3, Oxidizer 5.1, Radioactive 7, Non-Flammable Gas 2, and Blank Placards.superior durability, even under the toughest road conditions.sold per each.This White Split Frame Spacemaster System includes 8 placard panels in a single frame.
This Spacemaster System with 2 clipped corners includes 8 placard panels in a single frame: Dangerous Flammable Gas 2 Poison 6 Corrosive 8 Flammable 3 Oxidizer 5.1 Radioactive 7 Non-Flammable Gas 2 Blank Placards meet DOT specifications for transporting hazardous materials. Two clipped corner frame is designed for use on 15" roll-up rear door panels. Changing DOT placards when your load changes is as easy as the flip of a panel. Spacemaster eliminates the hassle and expense of replacing placards, so DOT compliance is virtually at your fingertips. Spacemaster frames are constructed of corrosion-resistant, fully formed rigid aluminum that provides superior durability, even under the toughest road conditions. Self-contained placard panels are constructed of aluminum alloy and mill rollercoated with white acrylic paint. Panels lock in place with 4 double-riveted stainless steel pressure fasteners. Legends are silkscreened with UV inks to retard fading, chipping or peeling. Spacemaster 2 Clipped Corner Frame, 8-Legend Flip Placard System for Trailers is sold per each..Dangerous Flammable Gas 2 Poison 6 Corrosive 8 Flammable 3 Oxidizer 5.1 Radioactive 7 Non-Flammable Gas 2 Blank Placards.Changing DOT placards when your load changes is as easy as the flip of a panel..Spacemaster 2 Clipped Corner Frame, 8-Legend Flip Placard System for Trailers is sold per each..Two clipped corner frame is designed for use on 15" roll-up rear door panels.
Keep your business cards neatly stored and easily accessible with the Fusion Business Card Holder in sleek white and gray. Designed for modern professionals, this holder features a compact and elegant design, making it a perfect addition to any desk, workspace, or reception area. Its durable construction ensures longevity while providing a polished, professional look. Whether at home, the office, or a conference, this versatile and stylish card holder helps you make a lasting impression while keeping your contacts organized..High-gloss, rolled edges provide bold contrast and sleek, modern design.Angled-open design is easy-access.Plastic-infused durability.Versatile in multiple environments: office, bedroom, and bathroom.White exterior with gray interior.Stylish and Functional Business Card Organization
This Full Frame Spacemaster System includes 8 placard panels in a single frame: Dangerous, Flammable Gas 2, Poison 6, Corrosive 8, Flammable Liquid 3, Oxidizer 5.1, Radioactive 7, Non-Flammable Gas 2, and Blank. These placards meet DOT specifications for transporting hazardous materials. Changing DOT placards when your load changes is as easy as the flip of a panel. Spacemaster eliminates the hassle and expense of replacing placards, so DOT compliance is virtually at your fingertips. Spacemaster frames are constructed of corrosion-resistant, fully formed rigid aluminum that provides superior durability, even under the toughest road conditions. Self-contained placard panels are constructed of aluminum alloy and mill roller-coated with white acrylic paint. Panels lock in place with 4 double-riveted stainless steel pressure fasteners. Legends are silkscreened with UV inks to retard fading, chipping or peeling. Spacemaster Full Frame, 8-Legend Flip Placard System for Trailers is sold per each..Placards included: Dangerous, Flammable Gas 2, Poison 6, Corrosive 8, Flammable Liquid 3, Oxidizer 5.1, Radioactive 7, Non-Flammable Gas 2, and Blank..Spacemaster eliminates the hassle and expense of replacing placards..Panels lock in place with 4 double-riveted stainless steel pressure fasteners..Spacemaster Full Frame, 8-Legend Flip Placard System for Trailers is sold per each..This Full Frame Spacemaster System includes 8 placard panels in a single frame: Dangerous, Flammable Gas 2, Poison 6, Corrosive 8, Flammable Liquid 3, Oxidizer 5.1, Radioactive 7, Non-Flammable Gas 2, and Blank.
Attach name badges to clothes with these C-Line name badge holder kits. The holders load from the top so badges don't fall out, while replacement inserts allow for repeated use. Free templates in Corel WordPerfect and Microsoft Word let you design and print badges with ease. These C-Line name badge holder kits use magnets instead of pins or clips to help prevent damage to clothing..Fasten this ID badge holder to clothing, bags, and more to keep your hands free.Magnet attaches easily and won't mar clothing.Top-loading design prevents inserts from falling out.Size: 4"W x 3"L.Designed for use with both inkjet and laser printers for optimal versatility.Comes in a box of 20 ID badge holders and 20 cards.Made of PVC-free polypropylene.Secure your name badge to your clothing with this 20-pack of C-Line 3 x 4-inch magnetic top-load name badge holder kits.
This White Finish ,Full Frame Spacemaster System includes 8 placard panels in a single frame: Dangerous, Flammable Gas 2, Poison 6, Corrosive 8, Flammable 3, Oxidizer 5.1, Radioactive 7, Non-Flammable Gas 2 and Blank. Placards meet DOT specifications for transporting hazardous materials. Changing DOT placards when your load changes is as easy as the flip of a panel. Spacemaster eliminates the hassle and expense of replacing placards, so DOT compliance is virtually at your fingertips. Spacemaster frames are constructed of corrosion-resistant, fully formed rigid aluminum that provides superior durability, even under the toughest road conditions. Self-contained placard panels are constructed of aluminum alloy and mill rollercoated with white acrylic paint. Panels lock in place with 4 double-riveted stainless steel pressure fasteners. Legends are silkscreened with UV inks to retard fading, chipping or peeling. Spacemaster White Finish Full Frame, 8-Legend Flip Placard System for Trailers is sold per each..Dangerous, Flammable Gas 2, Poison 6, Corrosive 8, Flammable 3, Oxidizer 5.1, Radioactive 7, Non-Flammable Gas 2 and Blank.Spacemaster eliminates the hassle and expense of replacing placards.sold per each.Placards meet DOT specifications for transporting hazardous materials.
For the ultimate in convenience, flexibility and time saving, Duo-Flip allows you to change both DOT placard legends and ID numbers in seconds to match your commodity. This Duo-Flip 8-Legend Flip Placard System includes 9 placard panels in a single full frame: Inhalation Hazard 2 Flammable Liquid 3 Combustible 3 Oxidizer 5.1 Inhalation Hazard 6 Poison 6 Corrosive 8 Miscellaneous 9 Blank Self-contained, .032 aluminum alloy placard panels slide over easily on four aluminum hinges. Notches in the aluminum panels allow you to flip numerals without interference. Panels lock in place with four stainless steel pressure fasteners. Duo-Flip 8-Legend Full Frame Flip Placard System for Tankers is sold per each..This Duo-Flip 8-Legend Flip Placard System includes 9 placard panels.Inhalation Hazard 2, Flammable Liquid 3, Combustible 3, Oxidizer 5.1, Inhalation Hazard 6, Poison 6, Corrosive 8, Miscellaneous 9, and Blank.Duo-Flip 8-Legend Full Frame Flip Placard System for Tankers is sold per each..Duo-Flip allows you to change both DOT placard legends and ID numbers in seconds to match your commodity.