PCIe Ethernet Cards

Upgrade your server connectivity with the Dell 540-BBGX, a high-performance quad-port Gigabit Ethernet adapter designed for enterprise environments. Featuring a PCI Express 2.0 x4 interface, this adapter delivers reliable, high-speed wired networking with up to 1 Gbps per port, ensuring smooth data transfer and minimal latency for demanding workloads. Ideal for virtualization, high-traffic applications, and multi-network setups, the four RJ-45 ports allow flexible configurations and efficient bandwidth utilization. Built to Dell’s rigorous standards, the 540-BBGX guarantees compatibility with a wide range of Dell PowerEdge servers, making integration seamless and hassle-free. With support for IEEE 802.3 standards and advanced features like load balancing and failover, this adapter enhances network resilience and performance. Its compact design and easy installation make it a practical choice for IT professionals looking to optimize server infrastructure without complexity. Whether you’re expanding your data center or upgrading your existing setup, the Dell 540-BBGX offers enterprise-grade reliability, scalability, and speed..This is a quad-port Gigabit Ethernet network adapter featuring a PCI Express 2.0 x4 interface, designed for high-performance wired connectivity in enterprise servers.The card provides four RJ-45 Gigabit Ethernet ports, allowing multiple network connections from a single adapter.It is fully compatible with a wide range of Dell PowerEdge servers, including models such as R220, R320, R420, R520, R620, R720, R730, R740, and T-series servers like T130, T330, T430, T630, among others.Complies with IEEE 802.3 standards for Gigabit Ethernet and supports 10/100/1000 Mbps data link protocols for versatile network integration

The Base-T Ethernet PCI-Express Network Interface Card from Dell is ideal for connecting your server to your network. The Base-T Quad Port Server Adapter proven to be reliable and standards-based solutions. This product has been tested and validated on Dell systems. It is supported by Dell Technical Support when used with a Dell system.Quad-port Ethernet network adapter with a PCI-Express interface that supports Gigabit and 10 Gigabit speeds.Delivers a maximum data transfer rate of 10,000 Mbps per port.Features four RJ-45 Ethernet ports for high-speed connectivity.Compatible with a wide range of Dell PowerEdge servers including models like R660, R760, R860, R960, C6620, HS5610, HS5620, and XR7620

This is a Gigabit Ethernet PCIe 2.0 x4 network interface card with dual RJ-45 ports that comply with IEEE 802.3 standards. It is based on an Intel I350 chipset and is compatible with a variety of different applications and operating systems, including Windows, Linux and Unix-like systems. Providing 10/100/1000Mbs of network speed, it fully supports high-end servers and various other networking applications. In addition, this card supports high level VLAN filtering. The dual RJ-45 ports operate over copper patch cable, allowing for an operating distance of 100m. This product includes both half-height and full-height brackets. Our network interface cards are 100% compliant, and offer a cost effective solution for all of your network upgrade needs. With our certification test program, we guarantee your product will work right the first time..Enjoy superfast data transfer of up to 2000 MB/s with PCI Express 2.0 x4 card, between the network card and motherboards.For high bandwidth connectivity, add this efficient dual port gigabit ethernet card to your server or workstation.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10/100/1000Base-T technology get up to 1000Mbps data transfer rate over the twisted pair cable

With Gen10 Plus ProLiant Servers, HPE offers the industry's most secure server platform. Through its Root of Trust server design down to the Network Interface Card (NIC), these security features are built-in so you can deploy with confidence. HPE Gen10 Plus servers will help prevent, detect and recover from cyberattacks such as denial of service and malware-infected firmware. Protecting applications, data and infrastructure from security breaches through storage and networking security technologies is first priority for HPE Gen10 Plus Servers. With Gen11 ProLiant Servers, HPE continues to offer industry-leading security and builds on Gen10 Plus features by adding support for SPDM security on select ethernet adapters..Ethernet adapter for Gen10 Plus ProLiant Servers.Provides data transfer rates up to 10Gbps.Contains two SFP+ ports.Features stand up profile with PCIe 3.0 x8.Power requirement: typical: 7.9 W; max: 9.1 W

StarTech.com® 2 Port network card provides redundant connectivity to ensure an uninterrupted network connection and includes RJ-45 interface. Network card is fully compatible with IEEE 802.3/u/ab standards for 10/100/1000 Mbps auto-negotiation..Network adapter interface: PCI express x 4.Network adapter speed: 2000 Mbps, 1000Mbps.Full duplex capability, wake on LAN, auto-uplink, jumbo frames support, teaming support, large send offload, TCP segmentation offload, tagged VLAN, checksum offload support.Network adapter ports: 2 x RJ-45.Media type supported: Twisted pair.Controller processor: Intel I350-AM2.Network technology: 10/100/1000Base-T.System requirements: Windows 8.1 (32/64bit), 8 (32/64), 7 (32/64), vista(32/64), XP(32/64) Windows Server 2012, 2008 R2, 2003(32/64) Linux 2.4.x/ 2.6.x.Cabling technology: 10/100/1000Base-TX Ethernet.Data link protocols: 10MB LAN, 100MB LAN, Gigabit LAN, network / transport protocols: TCP/IP, UDP/IP.Form factor: Plug-in card, chipset ID: Intel - I350-AM2.Connectivity technology: Wired, Port style: Integrated on card, LED indicators: Link/activity.Compatibility: PC.Dimensions: 4.8"(H) x 0.7"(W) x 2.6"(D).Operating temperature: 32 - 122 deg F, storage: -4 - +140 deg F, humidity: 5 - 85% RH.Cable requirements: Available PCI express x4 or higher (x8, x16) slot, supported protocols: IEEE 802.3ad (link aggregation), IEEE 1588 (time sync) / 802.1AS, IEEE 802.1q (VLAN tagging), auto MDIX and full duplex support.Includes 2-port network card, 1 x low profile bracket, 1 x driver CD, 1 x instruction manual.Complaints and standards: FCC, CE, IEEE 802.1q/AS, IEEE 1588, IEEE 802.3/u/ab/ad, PCI express base specification 2.1, RoHS, green compliance.Weight: 2.8 oz..Warranty: 2 years limited.StarTech.com® 2 Port network card is ideal for VM environments with multiple operating systems, requiring shared or dedicated NICs and supports twisted pair media.

The Allied Telesis™ AT-2914SX/LC-901 Optical fiber network adapter provides 1 Gbps networking over an existing optical fiber media. It features PCIe x1 slot for high-speed connection. This plug-in card supports 1000Base-SX network technology for added flexibility..Network adapter delivers high performance.Speed: 1 Gbps.Dimensions: 2.7"H x 3.5"W.Meets RoHS, REACH, WEEE, C-Tick, EN55022 Class A, EN55024, RoHS, TUV, UL and VCCI certifications and standards.Host interface: PCIe x1.Media type supported: Optical fiber.Network technology: 1000Base-SX.Color: Green/silver, Form Factor: Plug-in card.Connectivity: Wired.Network standards: IEEE 802.1p, IEEE 802.1Q, IEEE 802.1x, IEEE 802.2, IEEE 802.3ac, IEEE 802.3ad (LACP), IEEE 802.3z.System requirements: Linux, Microsoft Windows Vista/7/8/10.Remote management protocol: SNMP, Status indicators: Link/activity

This 2.5GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity. Variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Leverage existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration..One-port 2.5Gbps NBASE-T PCIe network card with Intel I225-V chip.Provides Ethernet speeds up to 2.5Gbps.Has a one RJ-45 port.OS compatibility: Windows 10, 11, Windows Server 2019, 2022, Linux 5.8.x and up (LTS versions only), and VMware ESXi 7.0.Meets or exceeds the RoHS, and WEEE standards.The PCIe network card leverages Intel vPro technology for remote management and troubleshooting capabilities.The card ships in a standard profile bracket and includes a low-profile bracket for installation into small form factor systems and servers.LAN card features built-in heat sink to keep the controller chip cool for optimal performance.Includes PCIe network card, low-profile bracket, and quick-start guide.2-year manufacturer limited warranty

This 2.5GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity. Variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Leverage existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration..One-port 2.5Gbps NBASE-T PCIe network card with Intel I225-V chip.Provides Ethernet speeds up to 2.5Gbps.Has a one RJ-45 port.OS compatibility: Windows 10, 11, Windows Server 2019, 2022, Linux 5.8.x and up (LTS versions only), and VMware ESXi 7.0.Meets or exceeds the RoHS, and WEEE standards.The PCIe network card leverages Intel vPro technology for remote management and troubleshooting capabilities.The card ships in a standard profile bracket and includes a low-profile bracket for installation into small form factor systems and servers.LAN card features built-in heat sink to keep the controller chip cool for optimal performance.Includes PCIe network card, low-profile bracket, and quick-start guide.2-year manufacturer limited warranty

The Dell network interface card offers a robust solution for businesses seeking high-speed and reliable connectivity for their server infrastructure. Designed to integrate seamlessly with a range of systems, including Dell's PowerEdge series such as the R6515 and R760, this component ensures compatibility with your existing hardware. Its wired connectivity, utilizing a PCI Express host interface, provides a stable and efficient data transfer rate up to 10 Gbps, making it ideal for demanding enterprise applications and data-intensive operations. This full-height PCI card incorporates four fiber ports utilizing SFP28 connectors, facilitating optimal network performance and scalability. By leveraging advanced fiber optic technology, it supports efficient and high-speed data transmission, which is crucial for maintaining operational efficiency in data centers and enterprise environments. The card's internal design allows for streamlined integration within server setups, minimizing downtime during deployment and enhancing overall system reliability..Ethernet network adapter with a PCIe interface, and it supports Gigabit Ethernet connectivity.Supports a maximum data transfer rate of 10,000 Mbps (10Gbps) per port.Features 4 Ethernet ports for high-speed wired connectivity.Compatible with a wide range of Dell PowerEdge servers, including models like R660, R760, R860, R960, T360, XR5610, and XR7620, and supports operating systems such as Windows Server and various Linux distributions

This is a Cisco® UCSC-PCIE-ITG comparable 10-Gigabit Ethernet PCIe 2.0 x8 network interface card with dual RJ-45 ports that comply with IEEE 802.3 standards. It is based on an Intel X540 chipset and is compatible with a variety of different applications and operating systems, including Windows, Linux and Unix-like systems. Providing 10Gbs of network speed, it fully supports high-end servers and various other networking applications. In addition, this card supports high level VLAN filtering. The dual RJ-45 ports operate over copper patch cable, allowing for an operating distance of 100m. This product includes both half-height and full-height brackets. Our network interface cards are 100% compliant, and offer a cost effective solution for all of your network upgrade needs. With our certification test program, we guarantee your product will work right the first time..This 4000 MB/s bandwidth PCI Express 2.0 x8 adapter ensures easy connectivity and plug-in form-factor for affordable and reliable Ethernet network.For high bandwidth connectivity, add this efficient dual port 10gigabit ethernet card to your server or workstation.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10GBase-T technology get up to 10Gbps data transfer rate over the twisted pair cable

Intel I350-T2 chipset supports reliable and advanced network connectivity Compliant with IEEE 802.3, 802.3u, 802.3ab with full duplex and Wake-on-LAN support..Type of Product/Use: Gigabit Ethernet Card for Server.Adapter Speed: Gigabit Ethernet.Number of ports and Type:2 RJ-45 .Dimensions as H x W x D in inches: 0.79" x 5.43" x 4.72".Installation Info: Plug-in Card.Warranty: 1 Year.Features innovative power management including Energy Efficient Ethernet (EEE) and DMA Coalescing to increase efficiency and reduce power consumption.Fits both standard and low profile system chassis with the included spare low profile bracket.WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.Quickly adds two independent Gigabit Ethernet ports through an available PCI Express slot to server or desktop systems

StarTech.com® Server network adapter card features two RJ-45 female Ethernet ports and offers full duplex support. Card offers a data transfer rate of 2000 Mbps for full-duplex transmission and 1000 Mbps for half-duplex transmission..Dimensions: 4.7"(H) x 0.7"(W) x 3.6"(L).Chipset ID: Realtek - RTL8111E, Asmedia - ASM1182E.Host interface: PCI-Express x1, Network technology: 10/100/1000Base-T- Gigabit Ethernet, Maximum data transfer rate: 2000 Mbps (full-duplex), 1000 Mbps (half-duplex).Interface/ports: 2 x RJ-45 network, Connector type: 1x PCI-Express x1 male.Form factor: Plug-in card.Device supported: Server.Performance: Auto MDIX, full-duplex support, Jumbo frame support: 9K max.Supported protocols: IEEE 802.1Q VLAN tagging, IEEE 802.1P layer 2 priority encoding and IEEE 802.3x full-duplex flow control.Card type: Standard Profile (LP bracket included), Port style: Integrated on card, Industry standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, PCI express base specification 2.0.Optional low-profile/half-height bracket that can be used for installation into a standard or small form-factor computer chassis.Indicators: LED: 2 - Green - Link/Activity, 2 - Yellow - Gigabit Mode.Software: OS Compatibility: Windows® 8.1 / 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), 2000 Windows® Server 2012, 2008 R2, 2003(32/64), Mac OS 10.4 and up, Linux 2.4.x and up.System and cable requirements: Available PCI-Express slot.Environmental: Temperature: Operating: 0 deg C to 70 deg C (32 deg F to 158 deg F), Storage: 0 deg C to 100 deg C (32 deg F to 212 deg F), Humidity: 10 approx. 90% RH.Includes 1 x PCIe network card, 1 x low-profile bracket, 1 x driver CD, 1 x instruction manual.Weight: 1.8 oz..Warranty: 2 years limited.StarTech.com® Server network adapter card contains two Ethernet ports and has a PCI express slot that allows you to connect it to client, server or a workstation.

Solarflare's XtremeScale X2522 dual-port 10/25G Ethernet network adapters are designed for high-performance electronic trading environments and enterprise data centers; including artificial intelligence, big data, analytics, hyperscale, machine learning, storage, and telco applications. Solarflare's record-breaking low latency and high throughput network adapters provide real-time packet and flow information to thousands of virtual NICs. This combination of ultra-high bandwidth, ultra-low latency, ultra-scale connectivity, and packet telemetry allows X2 series adapters to scale with each server, virtual machine or container..Network adapter is great for high-performance electronic trading environments and enterprise data centers.10/25G link speed support.Contains PCIe Gen 3.1 x8, 25G SFP28 or 10G SFP+ direct attach copper or optical transceiver; SFP28 cages.Dimensions: 6.6"L x 2.7"W; PCI Express low-profile: 3.12"H.Meets or exceeds FCC, UL, CE, RoHS standards.NIC capabilities: MSI-X support, interrupt coalescing, 2x10/25G 64-byte line rate.Supports the precision time protocol (PTP) fabric service for apps that require synchronized time stamping of packets down to single-digit nanosecond resolution.ServerLock technology complements firewall perimeter security, it is now possible to scale security inside your data center by using microsegmentation to scale packet surveillance, filtering, cloaking, and firewalling with every server.Provides real-time monitoring, inspection, and capture of packets needed for network performance management, security analytics, and compliance.Tamper-resistant adapter.PTP Daemon delivers enhanced stability and clock synchronization accuracy and can be used to synchronize the adapter clock to external time source.Manageability and remote boot: PXE and UEFI, Solarflare secure boot, secure firmware upgrade, NC-SI over MCTP SMBus, PLDM over MCTP SMBus, MCTP PCIe VDM.Management and utilities: ethtool support, vCenter plug-in, Solarflare boot manager.Traffic engineering: XtremePacket engine for dedicated parsing, filtering, and flow steering, TCP/UDP/IP, MAC, VLAN, RSS filtering, accelerated receive flow steering (ARFS), transmit packet steering.NVMeoF-TCP plug-in for low latency, high-performance storage networking on standard Ethernet fabric.Virtualization: Linux multi-queue; VMware NetQueue; Microsoft Hyper-V virtual machine queue (VMQ); SR-IOV: 16 physical functions, 240 virtual functions; 2048 Guest OS protected vNICs; full hardware switch fabric in silicon capable of steering any flow based on Layer 2 to Layer 4 protocols, between physical and virtual interfaces; VXLAN, NVGRE, and GENEVE tunneling offloads, adaptable to custom overlays; VLAN and VLAN Q-in-Q insertion/stripping.3-year manufacturer limited warranty

StarTech.com® Gigabit network server adapter NIC card features PCI Express x1 interface and offers network speed of up to 1000 Mbps. Card with link/activity LED indicators supports jumbo frames, wake-on-LAN and auto MDIx features..1 x Network.Twisted Pair.Full-height, Low-profile.Fully Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3x and IEEE 802.3ab standards.Processor: 1 x RTL8111E - Realtek semiconductor.Platform supported: PC, Mac.Server adapter offers performance flexibility and easy setup with support for advanced features such as Jumbo Frames, Wake-On-LAN and Auto MDIX.Includes both full profile and low profile/half-height installation brackets for installation in a wide range of computer/server chassis, regardless of form factor.Connectivity technology: Wired.Operating systems: Windows 2000/ XP (32/64-bit)/ Server 2003 (32/64-bit)/ Server 2008 R2/ Vista (32/64-bit)/ 7 (32/64-bit)/ 8 (32/64-bit)Mac OS X (Intel based, tested up to 10.8), Linux.Operating humidity: 10 percent ... to 90 percent ... RH.Operating Temperature: 0 to 70 deg C.Supported protocols: CSMA/CD.Network technology: 10/100/1000Base-T.Form factor: Plug-in card.Green compliance: RoHs.Dimensions: 2.7"(H) x 4.7"(W) x 0.7"(D); Weight: 1.4 oz..Warranty: 2 years limited.Startech.Com® ST1000SPEX2 Gigabit Network Server Adapter NIC Card offers performance flexibility and easy setup with support for advanced features such as Jumbo Frames, Wake-On-LAN and Auto MDIX.

TG-3468 Gigabit Network Adapter is a highly integrated and cost-effective adapter which is fully compliant with IEEE 802.3, IEEE 802.3u and IEEE 802.3ab specifications. This adapter keep low cost and eliminates usage barrier. It is the easiest way to upgrade a network from 10/100Mbps to 1000 Mbps. More from the Manufacturer.Dual Bracket: Low profile and standard profile bracket inside works with both mini and standard size PCs..Compatibility: Windows 10, 8.1, 8, 7, Vista, XP..Automation: Wake on LAN supporting Auto Negotiation and Auto MDI/MDIX..Supports: IEEE802.3x Flow Control for Full duplex Mode and backpressure for Half duplex Mode; 4k Bytes Port: 1x 10/100/1000Mbps RJ45 Network Media.

Axiom's 10GbE Copper Network Adapters are the latest generation of high-performance PCIe 3.0 x8 Lane 10 Gigabit NIC Cards, based on the Intel XL710 controller. The server adapter simplifies migration to 10 Gigabit Ethernet (GbE), Provides iSCSI FCoE Virtualization and Flexible Port Partitioning (FPP). Key Features: Low cost, low power, 10GbE performance for the entire datacenter. New generation single, dual and quad -port 1OGBASE-T controller with integrated MAC and PHY Standard CAT6a cabling with RJ45 connectors. Supports NBASE-T technology (2.5 and 5.0 GbE over CAT 5e) Backward compatibility with existing 1000BASE-T networks simplifies the transition to 10GbE. PCI Express - (PCIe) v3.0 with up to 8.0 GT/s Network Virtualization offloads including VXLAN, GENEVE, NVGRE, MPLS, and VXLAN-GPE with Network Service Headers (NSH) Excellent small packet performance for network appliances and Network Functions Virtualization (NFV).This 8000MB/s bandwidth adapter is ideal for PCs with PCI Express 3.0 x8 slots, ensuring top level network connectivity for your desktops.This quad ports network adapter is designed to meet the multi-port network connectivity needs of today's data centered environments demanding virtualization, converged infrastructure, and power reduction.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10GBase-T technology get up to 10Gbps data transfer rate over the twisted pair cable

Experience ultra-fast networking with the QNAP 10Gigabit Ethernet Card, ideal for upgrading client, server, or workstation connectivity. The PCI Express 3.0 x4 interface provides enhanced bandwidth for rapid data access and application performance. Easily connect to wired networks with a single port adapter for hassle-free, responsive networking. Supports cost-effective twisted pair cables for data transfer up to 100 meters, and 10GBase-T technology delivers up to 10Gbps speeds..PCI Express 3.0 x4 interface provides enhanced bandwidth for the quick access of data by the operating system and applications.Connect to a wired network with this single port network adapter for a hassle-free and quick response.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10GBase-T technology get up to 10Gbps data transfer rate over the twisted pair cable

TRENDnet's 10 Gigabit PCIe SFP+ Network Adapter, model TEG-10GECSFP, converts a free PCI Express slot into a 10 Gigabit SFP+ slot. The 10G SFP+ PCIe adapter includes advanced features such as jumbo frame and VLAN tagging support. The included standard and low profile brackets are compatible with Windows® and Linux® desktop computer designs. HARDWARE INTERFACE:10G SFP plus : 10G SFP plus PCIe adapter provides one SFP plus slot for high speed 10 Gigabit fiber connectivity NDAA + TAA COMPLIANT: With our NDAA and TAA compliant Network Adapters, you can plan and install networking solutions that Government customers demand today (U.S. and Canada Only) MANUFACTURER PROTECTION: We stand by the quality of our products. The TEG-10GECSFP 10 Gigabit PCIe SFP+ Network Adapter is backed and supported with 3 years of TRENDnet Manufacturer Protection. CONVERT A PCle 2.0 x4 SLOT: The SPF adapter converts a free PCI Express slot into a 10 Gigabit SFP plus slot. VLAN SUPPORT: IEEE 802.1Q tagged-based VLAN support COMPATIBLE OPERATING SYSTEMS: The SFP plus adapter is compatible with Windows, Windows Server, and Linux operating systems. JUMBO FRAME: The 10G SFP adapter sends larger packets, or jumbo frames (up to 16 KB), for increased performance BRACKETS INCLUDED: The 10 gigabit network adapter supports most installations and comes with standard and low-profile brackets ADDITIONAL SUPPORT: Microsoft Scalable Networking, Receive-side scaling (RSS), Message Signaled Interrupts (MSI), IP, TCP, and UDP checksum offloading, Minimize overhead with reduced host bus traffic and CPU utilization.Windows® and Linux® support.Includes standard and low-profile brackets.Converts a PCIe slot into a 10G SFP+ Slot.Supports 802.1Q VLAN Tagging

This is a Supermicro® AOC-STG-I2T comparable 10-Gigabit Ethernet PCIe 2.0 x8 network interface card with dual RJ-45 ports that comply with IEEE 802.3 standards. It is based on an Intel X540 chipset and is compatible with a variety of different applications and operating systems, including Windows, Linux and Unix-like systems. Providing 10Gbs of network speed, it fully supports high-end servers and various other networking applications. In addition, this card supports high level VLAN filtering. The dual RJ-45 ports operate over copper patch cable, allowing for an operating distance of 100m. This product includes both half-height and full-height brackets. Our network interface cards are 100% compliant, and offer a cost effective solution for all of your network upgrade needs. With our certification test program, we guarantee your product will work right the first time..This 4000 MB/s bandwidth PCI Express 2.0 x8 adapter ensures easy connectivity and plug-in form-factor for affordable and reliable Ethernet network.For high bandwidth connectivity, add this efficient dual port 10gigabit ethernet card to your server or workstation.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10GBase-T technology get up to 10Gbps data transfer rate over the twisted pair cable

Axiom's family of network server adapters provide a wide-range of solutions to boost network performance and improve IT flexibility. Available band-widths range from 100Mbs to 100Gbs on interfaces ranging from 32-Bit PCI to PCIe 4.0 x16. Each adapter provides standard connector options from single port, dual port, quad ports in copper and/or fiber-based connections. Axiom network interface cards accelerate applications with enterprise-proven connectivity. These solutions are available for designated branded OEM systems. Each Axiom network adapter is 100-percent tested to ensure long-term reliability and performance in high transaction and mission-critical applications. Optimized for virtualization. Maximizes I/O consolidation with high performance ports. Leverages and protects existing IT investments. Delivers cost reductions in operating expense and total cost expense. Provide connectivity and scalability required for enterprise environments. Deliver enterprise-class connectivity. Supports both data and storage I/O with an adapter that can integrate with your existing Fibre Channel and Ethernet networks, extending the value of your network investments. Achieve convergence - Run concurrent TCP/IP and storage (iSCSI or Fibre Channel) traffic over a single link. Includes Full Height and Half Height Mounting Brackets.Enjoy superfast data transfer of up to 4000 MB/s with PCI Express 2.0 x8 card, between the network card and motherboards.This dual port 10gigabit ethernet card lets you add two network ports using a single expansion slot to a client, server or workstation.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10Base-T technology get up to 10Mbps data transfer rate over the twisted pair cable

The Allied Telesis 2911 series AT-2911SX/SC 1000SX network adapter has PCI Express x1 host interface, one SC port and RJ-45 port for connectivity. It is compatible with PC. This adapter measures 2.7" x 3.6". It has link activity and link OK status indicators. This adapter has ACPI support, auto-negotiation, flow control, full duplex mode, jumbo frames support, load balancing and VLAN support. It comes with full-height bracket and low-profile bracket. The Gigabit Ethernet adapter offers data transfer rate of 1 Gb/s..Network adapter interface: PCI Express x1.Network adapter speed: 100 Mbps.Multi-mode fiber.Network adapter ports: 1 x SC.Network technology: 1000Base-SX.Form factor: Plug-in card.Connector type: SC.Cabling type: Ethernet 1000Base-SX.Connectivity technology: Wired.Data link protocol: Gigabit ethernet.Max transfer distance: 220 m.Network transport protocol: TCP/IP.Dimensions: 2.7"(H) x 3 1/2"(W).Weight: 0.13 lbs..Compliant standards: IEEE 802.1p.Allied Telesis Desktop fiber adapter offers high reliability, detailed tests, diagnostics and analysis. Supports network interface card for enhanced bandwidth and bus efficiency.

Startech Gigabit Ethernet card includes a standard profile bracket for installation in a wide range of computer/server chassis, regardless of form factor. Card adds a 10/100/1000 Mbps which is compatible with RJ45 Ethernet port..Network adapter interface: RJ45, 1 x AC power plug.Network adapter speed: 1000 Mbps.Compatible networks: 10/100/1000 Mbps.Card type: Low profile, Chipset ID: Realtek RTL8111E, Auto MDIX, full duplex support, Supported protocols: CSMA/CD.Connector type: 1 x PCI Express x1, Bus type: PCI Express, External ports: 1 x RJ-45.Optimize network traffic with support for advanced features such as Jumbo Frames and VLAN tagging.Industry standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab.Saves the time of having to adjust the mounting bracket, with a pre-configured half-height/low-profile bracket.LED indicators: 1 x Gigabit Detect (Yellow), 1 x Link/Activity (Green).Versatile Gigabit NIC/Server Adapter offers effective network performance.Environmental: Humidity 10% approx. 90% RH, Operating temperature: 0 to 70 deg C (32 to 158 deg F), Storage temperature: 0 to 100 deg C (32 to 212 deg F).System and cable requirements: Available PCI Express expansion card slot.OS Compatibility: Windows® 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), 2000, Windows® Server 2008 R2, 2003(32/64), Mac OS X (Intel based, tested up to 10.8), Linux, Physical Characteristics.Includes 1 x Gigabit Ethernet PCI Express Card, 1 x Standard Profile Bracket, 1 x Driver CD, 1 x Instruction Manual.Platform supported: PC.Warranty: 2 years limited.Startech Gigabit Ethernet card comes pre-configured with a low-profile/half-height installation bracket and has thickness of 700 mil.

1-Port 2.5GbE M.2 2280 Network Card, Multi-Gigabit Speeds (2.5G/1G/100M/10M), NBASE-T (802.3bz) NIC, M.2 B+M Key, PCIe Ethernet Interface, For SFF/Desktop PCs.High-performance M.2 Ethernet 2.5Gbps network card with Intel I225-V-chip; Multi-gigabit; Leverage existing Cat5e/Cat6 cabling (or better); NBASE-T (802.3bz); PCI Express M2 2280 B or M key compatible.M.2 2280 form factor is ideal for upgrading systems that do not have PCIe expansion slots or where slots are already in use; Includes 2ft (60cm) M/F Cat6 cable adapter for running Ethernet port to full/low-profile bracket on the rear of the PC.2.5GBASE-T variable speed options (2.5/1Gbps and 100/10Mbps) with auto-negotiation; Supports B or M key M.2 PCIe Gen 2 slots; Network interface card for PC is compatible with Windows/VMware/Linux; Full and low profile bracket included.Intel vPro® for remote management and troubleshooting; PXE boot enabled for faster deployment/updates; 9K jumbo frame for reduced packet overhead; Remotely boot a system using WoL; VLAN support for efficient network management.Designed and built for IT Professionals, this 2.5 GbE M.2 NIC is backed for two years, including free lifetime 24/5 multi-lingual technical assistance.This Ethernet card supports the following advanced features: PXE Boot, Wake-on-Lan (WoL), VLAN tagging, 9K jumbo frame, half-duplex, auto-negotiation, and Error Correcting Memory (ECC) for optimal network functionality..This 2.5 GbE M.2 Network Interface Card (NIC) features an Intel I225-V chipset with Intel vPro® technology, for enhanced performance and data integrity. Variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support of new and legacy network hardware. Leverage existing Cat5e or CAT6 cabling infrastructure while adding 2.5GBASE-T (802.3bz) compatibility for seamless integration.

QNAP offers various cost-effective network expansion cards for businesses and home users to easily upgrade the bandwidth of their QNAP NAS, servers and computers to accommodate high-speed data transfer and bandwidth-hungry applications. 2.5 GbE network expansion card 2.5 GbE network expansion card delivers speeds of up to 2.5 Gbps. You can easily upgrade your home and office network infrastructure with existing cables..Enjoy superfast data transfer of up to 2000 MB/s with PCI Express 2.0 x4 card, between the network card and motherboards.This quad ports network adapter is designed to meet the multi-port network connectivity needs of today's data centered environments demanding virtualization, converged infrastructure, and power reduction.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters

The QXG-10G2T is a highly energy efficient and cost-effective 10 GbE network expansion card, which is suitable for a team requiring simultaneous data access with multiple members, or a photographer/videographer requiring super-fast data transmission. 5-speed Supports five speeds (10GbE / 5GbE / 2.5GbE / 1GbE / 100MbE). NAS and PC The QXG-10G2T can be installed in a QNAP NAS or Windows® PC. Marvell® AQtion Controller AQC107 Highly energy efficient and cost-effective. PCIe 3.0 PCIe Gen 3 x4 provides up to 32 Gbps transfer speeds. Efficient cooling module Keeps the QXG-10G2T cool and maintains high performance. LED indicators Monitor the real-time status of ports with handy LED indicators. Supports NAS and PC OS QNAP Network Expansion Cards support NAS operating systems (QTS and QuTS hero), Windows® 10 and Linux®, allowing you to maximize the performance potential of all your networked devices. Gain up to 20 Gbps connectivity By virtually bundling two 10 GbE ports with SMB multichannel or port trunking, you gain larger bandwidth for your QNAP NAS. Let's see which features are suitable for your usage scenarios: SMB Multichannel: Multiply the available bandwidth (20 Gbps) between NAS and directly-connected clients. Suited for personal use. Port trunking: Increases file access efficiency for simultaneous data access with multiple members. Recommended for users who deploy network switches in their IT infrastructure. Build a 10 GbE network environment Increase your IT performance and productivity by using the QXG-10G2T with QNAP's 10 GbE switches to build budget-friendly high-speed network environments. Fully unleash your network with a companion switch Build your ideal network environment to satisfy connectivity demands and streamline various storage applications..PCI Express 3.0 x4 interface provides enhanced bandwidth for the quick access of data by the operating system and applications.This dual port 10gigabit ethernet card lets you add two network ports using a single expansion slot to a client, server or workstation.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10GBase-T technology get up to 10Gbps data transfer rate over the twisted pair cable

The 5 GbE network expansion card delivers speeds of up to 5 Gbps. You can easily upgrade the transfer speed in your network environment with existing cables..Enjoy superfast data transfer of up to 500 MB/s with PCI Express 2.0 x1 card, between the network card and motherboards.This single port 5gigabit ethernet card enables you to connect your computer system to your existing network.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.5GBase-T network technology for fast, dependable connectivity with maximum efficiency

The 5 GbE network expansion card delivers speeds of up to 5 Gbps. You can easily upgrade the transfer speed in your network environment with existing cables..The PCI Express 3.0 x2 interface provides smooth data transfer and outstanding performance.For high bandwidth connectivity, add this efficient dual port 5gigabit ethernet card to your server or workstation.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.5GBase-T network technology for fast, dependable connectivity with maximum efficiency

The Axiom PCIe 3.0 x8 10Gbs Fiber Network Adapter is a new generation of high-performance server adapter. Based on the Intel X710-BM2 controller, our server adapters address the demanding needs of the next-generation agile data center by providing unmatched features for both server and network virtualization, flexibility for LAN and SAN networks and proven, reliable performance. The PCIe 3.0 x8 10Gbs Fiber Network Adapter delivers superior performance in a PCI Express v3.0 x8 slot. Key features include: Small Packet Performance: Achieves wire-rate throughput on smaller payload sizes (>64 Bytes for 10 GbE) Bulk Transfer Performance: Delivers line-rate performance with low CPU usage for large application buffers Network Virtualization: Network virtualization overlay offloads including Geneve, VXLAN, and NVGRE Storage Performance: Enables competitive performance with native OS drivers and intelligent offload for NAS (NFS, SMB), and SAN (iSCSI and FCoE) Includes Full Height and Half Height Mounting Brackets.Enjoy superfast data transfer of up to 8000 MB/s with PCI Express 3.0 x8 card, between the network card and motherboards.This dual port 10gigabit ethernet card lets you add two network ports using a single expansion slot to a client, server or workstation.Supports optical fiber cable to span longer distances and provides data transmission rates par excellence between servers and network components.With the 10GBase-X technology get up to 10Gbps data transfer rate over the supported network cable

2.5 GbE network expansion card delivers speeds of up to 2.5 Gbps. You can easily upgrade your home and office network infrastructure with existing cables..This 500MB/s bandwidth adapter is ideal for PCs with PCI Express 2.0 x1 slots, ensuring top level network connectivity for your desktops.This single port 2.5gigabit ethernet adapter enables you to connect your computer system to your existing network.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.2.5GBase-T network technology for reliable connectivity with maximum productivity

The Ethernet PCI-Express Network Interface Card from Dell is ideal for connecting your server to your network. The Dual Port Server Adapter proven to be reliable and standards-based solutions. This product has been tested and validated on Dell systems. It is supported by Dell Technical Support when used with a Dell system..Dual-port Ethernet network adapter with an OCP 3.0 interface that supports 10/25 Gigabit Ethernet connectivity.Supports a maximum data transfer rate of up to 25,000 Mbps.Features two high-speed Ethernet ports.Compatible with Dell PowerEdge servers that support the OCP 3.0 interface, including models like R650, R750, R760, C6520, C6620, T550, T560, XE8640, XE9680, XR5610, and XR7620

The Axiom PCIe 3.0 x8 10Gbs Fiber Network Adapter is a new generation of high-performance server adapter. Based on the Intel X710-BM2 controller, our server adapters address the demanding needs of the next-generation agile data center by providing unmatched features for both server and network virtualization, flexibility for LAN and SAN networks and proven, reliable performance. The PCIe 3.0 x8 10Gbs Fiber Network Adapter delivers superior performance in a PCI Express v3.0 x8 slot. Key features include: Small Packet Performance: Achieves wire-rate throughput on smaller payload sizes (>64 Bytes for 10 GbE) Bulk Transfer Performance: Delivers line-rate performance with low CPU usage for large application buffers Network Virtualization: Network virtualization overlay offloads including Geneve, VXLAN, and NVGRE Storage Performance: Enables competitive performance with native OS drivers and intelligent offload for NAS (NFS, SMB), and SAN (iSCSI and FCoE) Includes Full Height and Half Height Mounting Brackets.This 8000 MB/s bandwidth PCI Express 3.0 x8 adapter ensures easy connectivity and plug-in form-factor for affordable and reliable Ethernet network.For high bandwidth connectivity, add this efficient dual port 10gigabit ethernet card to your server or workstation.Supports optical fiber cable to span longer distances and provides data transmission rates par excellence between servers and network components.With the 10GBase-X technology get up to 10Gbps data transfer rate over the supported network cable

Maximize bandwidth to tackle heavy-duty applications The Synology E10G22-T1-Mini Network Upgrade Module is designed to easily and quickly upgrade your Synology system with 10GbE connectivity. 1 Simple installation, low implementation cost, and support for nearly any network environment makes it the ideal solution for small businesses and home users looking to maximize the performance potential of their deployments. Throughput Expand system capabilities with 10GbE connectivity Flexibility Integrate easily with support for 10/5/2.5/1 Gbps networks. Compatibility Designed for maximum performance and reliability in Synology system.s Simple installation Install the E10G22-T1-Mini through the dedicated and easily-accessible network upgrade slot to instantly add bandwidth availability in Synology servers featuring compact-size enclosures. Multi-gig support Integrate into any RJ-45 network environment with autonegotiation between 10, 5, 2.5, 1 Gbps, and 100 Mbps data rates based on actual network conditions..The PCI Express 3.0 x2 interface provides smooth data transfer and outstanding performance.Add your computer to your home or office network with this single port 10gigabit ethernet card conveniently.With the 10GBase-T technology get up to 10Gbps data transfer rate over the twisted pair cable

The Axiom PCIe 3.0 x8 10Gbs Fiber Network Adapter is a new generation of high-performance server adapter. Based on the Intel X710-BM2 controller, our server adapters address the demanding needs of the next-generation agile data center by providing unmatched features for both server and network virtualization, flexibility for LAN and SAN networks and proven, reliable performance. The PCIe 3.0 x8 10Gbs Fiber Network Adapter delivers superior performance in a PCI Express v3.0 x8 slot. Key features include: Small Packet Performance: Achieves wire-rate throughput on smaller payload sizes (>64 Bytes for 10 GbE) Bulk Transfer Performance: Delivers line-rate performance with low CPU usage for large application buffers Network Virtualization: Network virtualization overlay offloads including Geneve, VXLAN, and NVGRE Storage Performance: Enables competitive performance with native OS drivers and intelligent offload for NAS (NFS, SMB), and SAN (iSCSI and FCoE) Includes Full Height and Half Height Mounting Brackets.Enjoy superfast data transfer of up to 8000 MB/s with PCI Express 3.0 x8 card, between the network card and motherboards.For high bandwidth connectivity, add this efficient dual port 10gigabit ethernet card to your server or workstation.Supports optical fiber cable to span longer distances and provides data transmission rates par excellence between servers and network components.With the 10GBase-X technology get up to 10Gbps data transfer rate over the supported network cable

This 4-port RJ45 1Gbps OCP 3.0 Network Interface Card (NIC) features an Intel® i350-AM4 Ethernet Controller, enhancing performance and data integrity. The Ethernet card adheres to OCP 3.0 standards and ensures broad compatibility, making it an ideal solution for reliable network connectivity and robust data transfer capabilities. Optimized Network Efficiency Leverage existing Cat5e/Cat6 cabling (or better) up to 100m to maximize existing networks and equipment. The NIC supports variable speed options (10/100/1000 Mbps) with auto-negotiation and 9K jumbo frames to reduce packet overhead, reducing network slowdowns..4-Port RJ45 Gigabit OCP 3.0 Server Network Card, 1 Gbps.Maximum Data Transfer Rate 1Gbps.Number of ports 4.OS Compatibility Windows Server 2012, 2012 R2, 2016, 2019, 2022, 11, 10 VMware ESXi 7.x Linux 2.4.x and up - LTS Versions only.Chipset Model I350-AM4.Media Type Supported Twisted Pair.Form Factor: Plug-in Card.Limited Warranty 2 Year

The Broadcom NetXtreme Gigabit Ethernet Adapters are a family of high performance PCIe and OCP adapters. The adapters are available with either two ports or four ports and are supported on ThinkSystem and System x servers. Did you know? The NetXtreme Quad Port Ethernet Adapter is an ideal way to implement a virtualization solution using your existing Gigabit Ethernet network. With four copper-based Gigabit ports on a single PCI Express 2.0 x4 interface, the adapter provides the density and capacity you need to support large numbers of virtualized systems on one server..This 2000MB/s bandwidth adapter is ideal for PCs with PCI Express 2.0 x4 slots, ensuring top level network connectivity for your desktops.With quad ports on a single card, save valuable expansion slots on your system for other purposes.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10/100/1000Base-T technology get up to 1000Mbps data transfer rate over the twisted pair cable

The Xilinx XtremeScale series of Ethernet network adapters are designed for high-performance electronic trading environments and enterprise data centers; including artificial intelligence, big data, analytics, hyperscale, machine learning, storage, and telco applications. With record-breaking low latency and high throughput, XtremeScale network adapters provide real-time packet and flow information to thousands of virtual NICs. This combination of ultra-high bandwidth, ultra-low latency, ultra-scale connectivity, and packet telemetry allows X2 series adapters to scale with each server, virtual machine or container. For cloud data centers, Onload application acceleration software dramatically accelerates and scales network-intensive workloads such as in-memory databases, software load balancers, and web servers. With Onload, data centers can support 4X or more users on their cloud network while delivering improved reliability, enhanced quality of service (QoS), and a higher return on investment, without modification to existing applications. In electronic trading environments, Onload kernel bypass application acceleration and DPDK services deliver superior small packet performance with sub-microsecond hardware latency. In addition, XtremeScale adapters support the precision time protocol (PTP) fabric service for apps that require synchronized time stamping of packets down to single-digit nanosecond resolution..Ethernet network adapter is designed for high-performance electronic trading environments and enterprise data centers, including artificial intelligence, big data, analytics, hyperscale, storage, and more.Supports 10G/25 Gigabit Ethernet.Features 2x10/25G 64-byte line rate, PCIe 3.1 x16, QSFP28.NIC capabilities: MSI-X support, interrupt coalescing.Network acceleration: Data Plane Development Kit (DPDK) Poll Mode, Driver - packet, Onload -TCP/UDP, TCPDirect - TCP/UDP.Offers low-profile design with MD2.3-year manufacturer limited warranty

HPE Gen10 Plus Ethernet Adapters HPE ProLiant DL, ML and Apollo Driven by hybrid cloud services, mobile data and streaming video applications, IT professionals are constantly challenged to deliver secure and reliable network bandwidth that cost-effectively scales to demands of the networking traffic. For any given workload, the right mix of performance, efficiency, reliability and security are paramount. HPE has your data center infrastructure covered with the latest networking adapters, switches, transceivers and cables for a complete end-to-end solution to support your various workload needs. With Gen10 Plus ProLiant Servers, HPE is offering the industry's most secure server platform. Through its Root of Trust server design down to the Network Interface Card (NIC), these security features are built-in so you can deploy with confidence. HPE Gen10 Plus servers will help prevent, detect and recover from cyberattacks such as denial of service and malware-infected firmware. Protecting applications, data and infrastructure from security breaches through storage and networking security technologies is first priority for HPE Gen10 Plus Servers..Enjoy superfast data transfer of up to 8000 MB/s with PCI Express 3.0 x8 card, between the network card and motherboards.This dual port 25gigabit ethernet card lets you add two network ports using a single expansion slot to a client, server or workstation.Supports optical fiber cable to span longer distances and provides data transmission rates par excellence between servers and network components.25GBase-X network technology for reliable connectivity with maximum productivity

HPE Gen10 Plus Ethernet Adapters HPE ProLiant DL, ML and Apollo Driven by hybrid cloud services, mobile data and streaming video applications, IT professionals are constantly challenged to deliver secure and reliable network bandwidth that cost-effectively scales to demands of the networking traffic. For any given workload, the right mix of performance, efficiency, reliability and security are paramount. HPE has your data center infrastructure covered with the latest networking adapters, switches, transceivers and cables for a complete end-to-end solution to support your various workload needs. With Gen10 Plus ProLiant Servers, HPE is offering the industry's most secure server platform. Through its Root of Trust server design down to the Network Interface Card (NIC), these security features are built-in so you can deploy with confidence. HPE Gen10 Plus servers will help prevent, detect and recover from cyberattacks such as denial of service and malware-infected firmware. Protecting applications, data and infrastructure from security breaches through storage and networking security technologies is first priority for HPE Gen10 Plus Servers..Enjoy superfast data transfer of up to 8000 MB/s with PCI Express 3.0 x8 card, between the network card and motherboards.For high bandwidth connectivity, add this efficient dual port 10gigabit ethernet card to your server or workstation.Supports optical fiber cable to span longer distances and provides data transmission rates par excellence between servers and network components.With the 10GBase-X technology get up to 10Gbps data transfer rate over the supported network cable

Axiom's 10GbE Copper Network Adapters are the latest generation of high-performance PCIe 3.0 x4 Lane 10 Gigabit NIC Cards, based on the Intel X550AT controller. The server adapter simplifies migration to 10 Gigabit Ethernet (GbE), Provides iSCSI FCoE Virtualization and Flexible Port Partitioning (FPP). Key Features Low cost, low power, 10GbE performance for the entire datacenter. New generation single- and dual-port 1OGBASE-T controller with integrated MAC and PHY Standard CAT6a cabling with RJ45 connectors. Supports NBASE-T technology (2.5 and 5.0 GbE over CAT 5e) Backward compatibility with existing 1000BASE-T networks simplifies the transition to 10GbE. PCI Express - (PCIe) v3.0 with up to 8.0 GT/s Unified networking delivering LAN iSCSI and FCoE in one low-cost CNA. Flexible 1/0 virtualization for port partitioning and Quality of Service (QoS) of up to 64 virtual ports Reliable, proven 10GbE technology from Intel Corporation. Includes Full Height and Half Height Mounting Brackets.PCI Express 3.0 x4 interface provides enhanced bandwidth for the quick access of data by the operating system and applications.This single port 10gigabit ethernet card enables you to connect your computer system to your existing network.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10GBase-T technology get up to 10Gbps data transfer rate over the twisted pair cable

The Solarflare® Flareon Ultra SFN8542-Plus 40 Gigabit 2-port server adapter delivers faster, more efficient processing of network traffic to accelerate a wide range of applications. This adapter accelerate, monitor and secure you network by providing ultra low latency, high packet rate, internal switch for single core/4 port operation and 16 lanes PCIe 3.1 for full 2 x 40 Gbps bidirectional performance..Server adapter delivers faster, more efficient processing of network traffic.Host interface: PCI Express 3.1 x16, total number of ports: 2, expansion slot: QSFP+.Dimensions: 6.6"L x 2.7"W.Power: 10 W (typ).Green, RoHS compliant.Form factor: Plug-in module.Card height: Low profile, end bracket height: PCI Express standard 4.725", PCI Express low profile: 3.12".Management: SNMP, ACPI v3.0.Media type supported: Optical fiber.Network technology: 40GBase-X.Compatible with server.IEEE802.3-2012 Ethernet base standard, including 802.3bx, 802.3bd, 802.3x, 802.3ba (40G/s), 802.3ae (10 Gigabit Ethernet over fiber).Operating range: 0 - 50 deg C