Fast Ethernet Cards
76 results
Adds multi-gigabit Ethernet capability to your server or desktop computer, quickly enable 2.5G, 1G, 100Mbps, or 10Mbps connection over a single RJ45 connection Easily add a multi-Gigabit Ethernet port through an available x1 PCIe slot to server and desktop computers Compliant with PCI Express Specification Revision 2.1 Compatible with NBASE-TTM Alliance PHY Specification Supports 4 Multi-Speed of 10M/100M/1Gbps/2.5Gbps Ethernet data rates Compatible with IEEE 802.3, 802.3u, 802.3a, IEEE 802.3bz (2.5GBase-T), IEEE 802.1Q VLAN tagging, IEEE 802.3az (Energy Efficient Ethernet) Supports jumbo frame to 16K bytes for higher and better data throughput Supports Full Duplex flow control IEEE 802.3x Supports Wake-On-LAN and 'RealWoW!' Technology (Remote wake-up) Fits both standard and low profile system chassis with the included spare low profile bracket.Compliant with PCI Express Specification Revision 2.1.Compatible with NBASE-TTM Alliance PHY Specification.Supports 4 Multi-Speed of 10M/100M/1Gbps/2.5Gbps Ethernet data rates.Compatible with IEEE 802.3, 802.3u, 802.3a, IEEE 802.3bz (2.5GBase-T), IEEE 802.1Q VLAN tagging, IEEE 802.3az (Energy Efficient Ethernet)
Enjoy the super fast Gigabit Ethernet connection by inserting this Gigabit Ethernet card into your computer..Simply plug into any USB port and have an instant networking solution for your computer.Add your computer to your home or office network with this single port gigabit ethernet card conveniently.With the 10/100/1000Base-T technology get up to 1000Mbps data transfer rate over the twisted pair cable
This card features MDI/MDIX automatic configuration which helps to simplify installation and configuration. Adapter card provides full and half duplex support for connected devices..Network adapter interface: RJ45.Network adapter speed: 100 Mbps.Compatible networks: 10/100 Mbps.Number of ports: 1.Bus type: PCI express.Card type: Standard profile (LP bracket included).Chipset ID: Realtek - RTL8101E.OS compatibility: Windows 2000/ XP(32/64-bit)/ Server 2003(32/64-bit)/ Server 2008 R2/ Vista(32/64-bit)/ 7(32/64-bit)/ 8(32/64-bit), Linux.Connector type: 1 x PCI express x1 male.External ports: 1 x RJ-45 female.Dimensions: 0.8"(H) x 4.7"(W) x 3.6"(D).LED indicators: 1 x link status.Certificates and standards: CE, FCC, RoHs.Includes: 1 x 10/100 PCI-Express Ethernet Card, 1 x Low Profile Bracket, 1 x Driver CD, 1 x Instruction Manual.Weight: 1.6 oz..Warranty: Lifetime limited
Intel® 4-Port ethernet server adapter has 4 x PCI express 2.1 host interfaces and supports PC as well as server platforms. Adapter includes 4 RJ-45 ports and uses copper as conducting material to resist corrosion..Dimensions: 2.7"H x 5.3"W.For PC.Form factor: Plug-in card.Conductor: Copper.Host interface: PCI Express 2.1 x4.Network technology: 10/100/1000Base-T.Total number of ports: 4.Connectivity technology: Wired.Cabling type: Cat 5 up to 100 m, Bracket height: Low and full-height.Storage over Ethernet: iSCSI, NFS.Speed: 5 GT/s, Slot width: x4 lane.Thermal design power: 5 W.Addresses the demanding needs of the next-generation agile data center by providing unmatched features for both server and network virtualization, flexibility for LAN and SAN networks, and proven, reliable performance.Certifications and standards: ACPI, BSMI, C-Tick, FCC, KCC, UL, VCCI.Intel® 4-Port ethernet server adapter has 10/100/1000Base-T network technology and supports twisted pair media to reduce signal interference.
Allied Telesisâ„¢ 1 Port fast ethernet fiber network interface card supports 100Base-FX network technology with plug-in card form factor. Card gives you the maximum possible bandwidth and bus efficiency with capability and low power consumption..Network adapter interface: PCI Express x1.Network adapter speed: 100 Mbps.Provides fast networking connectivity even when other cards are installed in your computer.Ports: 1 x ST.Network technology: 100Base-FX.Form factor: Plug-in card.Connectivity technology: Wired.Media type supported: 50/125 Microm and 62.5/125 Microm fiber-optic cable.Dimensions: 2.7"(H) x 4.8"(D).Operating distance: Up to 2000 m in full-duplex, up to 412 m in half-duplex.Power: 3.3V, 2 W power consumption.Umbo frame up to 9.6 KB.Operating system: Novell NetWare 6.x, Linux 2.4, Microsoft Windows Server 2003, Linux 2.6, Microsoft Windows 2000/XP/Vista/7, Microsoft Windows Server 2008.Operating temperature: 32 - 122 deg F, Humidity: 5 - 90% (non-condensing).Certifications and standards: FCC-Class B certified, UL, TUV, VCCI, C-Tick, EN55024, EN55022 Class B, RoHS.Weight: 1.92 oz..Allied Telesisâ„¢ 1 Port fast ethernet fiber network interface card has PCI express x 1 host interface and supports 50/125 Microm and 62.5/125 Microm fiber optic cable.
StarTech.com® 2 Port network card provides redundant connectivity to ensure an uninterrupted network connection and includes RJ-45 interface. Network card is fully compatible with IEEE 802.3/u/ab standards for 10/100/1000 Mbps auto-negotiation..Network adapter interface: PCI express x 4.Network adapter speed: 2000 Mbps, 1000Mbps.Full duplex capability, wake on LAN, auto-uplink, jumbo frames support, teaming support, large send offload, TCP segmentation offload, tagged VLAN, checksum offload support.Network adapter ports: 2 x RJ-45.Media type supported: Twisted pair.Controller processor: Intel I350-AM2.Network technology: 10/100/1000Base-T.System requirements: Windows 8.1 (32/64bit), 8 (32/64), 7 (32/64), vista(32/64), XP(32/64) Windows Server 2012, 2008 R2, 2003(32/64) Linux 2.4.x/ 2.6.x.Cabling technology: 10/100/1000Base-TX Ethernet.Data link protocols: 10MB LAN, 100MB LAN, Gigabit LAN, network / transport protocols: TCP/IP, UDP/IP.Form factor: Plug-in card, chipset ID: Intel - I350-AM2.Connectivity technology: Wired, Port style: Integrated on card, LED indicators: Link/activity.Compatibility: PC.Dimensions: 4.8"(H) x 0.7"(W) x 2.6"(D).Operating temperature: 32 - 122 deg F, storage: -4 - +140 deg F, humidity: 5 - 85% RH.Cable requirements: Available PCI express x4 or higher (x8, x16) slot, supported protocols: IEEE 802.3ad (link aggregation), IEEE 1588 (time sync) / 802.1AS, IEEE 802.1q (VLAN tagging), auto MDIX and full duplex support.Includes 2-port network card, 1 x low profile bracket, 1 x driver CD, 1 x instruction manual.Complaints and standards: FCC, CE, IEEE 802.1q/AS, IEEE 1588, IEEE 802.3/u/ab/ad, PCI express base specification 2.1, RoHS, green compliance.Weight: 2.8 oz..Warranty: 2 years limited.StarTech.com® 2 Port network card is ideal for VM environments with multiple operating systems, requiring shared or dedicated NICs and supports twisted pair media.
Allied Telesisâ„¢ AT-2711FX/SC-901 Network interface card offers 1.2 miles of maximum transfer distance and supports ACPI function. Card with PCI express x1 interface features IEEE 802.1p standard and fast Ethernet data link protocol. Interface card with SNMP remote management protocol has Ethernet 100Base-FX cabling. Wired network interface card with plug-in card form factor features BCM5752 Broadcom processor and 72KB RAM..Desktop network interface card is use to give maximum possible bandwidth.Measures 2.7"H x 3"W.Features fast Ethernet data link protocol for high performance and transfers data at the rate of 100 Mbps.Supports PCI Express x1, SC 100Base-FX host interface for easy connectivity & has plug-in-card form factor for economical ethernet network connection.Features status indicators on for link up, off link down and blink for activity.Supports Broadcom BCM57762 network controller for high performance.Consumes 2.0 W max. power and uses 3.3 signaling voltage.Meets IEEE 802.1p Quality of Service, IEEE 802.1Q VLAN tag, IEEE 802.1as 1588 precision time protocol, IEEE 802.1qat interface standards.Operates with the maximum cabling distance of Up to 6560' in full-duplex.MSI and MSI-x, IEEE 802.1x flow control, Audio/Video Bridging (AVB), IEEE 802.1p-based traffic prioritization, TCP Checksum RX/TX supported.Operates efficiently on Windows 8/7/Vista/XP (32-bit, 64-bit), Windows Server 2008, Windows Server 2008 R2 operating systems.Has a operating temperature of 0 - 50 deg C and -25 - 70 deg C storage temperature to adjust for all environmental conditions.Includes full-height bracket and low-profile bracket to connect easily for desktop.Meets RoHS, UL, FCC/EN55022 Class B, TUV, EN55024, CE, C-TICK, VCC, TAA certifications and standards.Weighs 50 g.Min operating system: Linux 2.4, Linux 2.6, Microsoft Windows 2000/XP/Vista/7, Microsoft Windows Server 2003, Microsoft Windows Server 2008, Novell NetWare 6.x.Humidity range operating: 5 - 90% (non-condensing).Operating temperature: 32 - 122 deg F.Compliant standards: C-Tick, EN55022 Class B, EN55024, FCC Class B certified, RoHS, TUV, UL, VCCI.Warranty: Lifetime limited.Allied Telesisâ„¢ Network interface card provides up to 100Mbps data transfer rate. Card offers you the maximum possible bandwidth and bus efficiency.
Intel® Ethernet server adapter consists of data link protocols such as 10MB LAN, 100MB LAN and gigabit LAN. Adapter supports twisted pair media type and has audio video bridging with power management technologies..Network adapter interface: PCI express x1.Adapter represents the next step in the Gigabit Ethernet networking evolution for the enterprise and data center, offering audio video bridging.Dimensions: 2.6"(H) x 0.7"(W).Ports: Single port, Card height: Low-profile, full-height, Connector and cable: RJ-45 copper, Cable type: Category-3, category-5, category-5e up to 100 m.Media and performance: Category 5e twisted pair.Network and communication: 10/100/1000base-T.Device supported: PC, Mac.Form factor: Plug-in card.Ethernet controller: Intel Ethernet controller I210.Package includes: Ethernet server adapter I210, low-profile bracket.Standards and certificates: FCC B, UL CE, VCCI, BSMI, CTick, KCC, IEEE standards: 802.1Qav, 802.1Qat, 802.1AS, 802.3, 802.3u, 802.3x, 802.3z, 802.3ab, 802.3az.Warranty: Lifetime.Intel® Ethernet server adapter is a plug in card which has 10/100/1000Base-T network technology and efficiently manages packets with minimum latency.
Upgrade your desktop or server with the StarTech 1-Port 5G PCIe Gigabit Ethernet Adapter. Featuring the Realtek RTL8126 chipset, this TAA-compliant NIC delivers blazing-fast 5Gbps speeds and supports auto-negotiation across 5G/2.5G/1G/100M/10M networks. Designed for plug-and-play installation, it’s compatible with Windows, Linux, and Windows Server platforms. The card supports jumbo frames, VLAN tagging, PXE boot, and Wake-on-LAN for efficient network management. With both full-height and low-profile brackets included, it fits seamlessly into standard or compact systems..Built as an Ethernet adapter with PCIe interface and supports 5Gbps Gigabit speeds..Offers one RJ-45 port for multi-gigabit connectivity across 5G/2.5G/1G/100M/10M networks..Includes PCIe card, low-profile bracket, and quick-start guide in the box..Compatible with Windows 10/11, Windows Server 2019/2022, and Linux Ubuntu 20.04+..Measures 2.8 in (L) × 4.7 in (W) × 0.7 in (H)..2-year manufacturer warranty.
This 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity. The variable multi speed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Utilize existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration.This 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity.The variable multi speed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware.Contains PCI Express, SATA power (15 pin), and RJ-45 (PoE+).Supports the IEEE 802.3af and IEEE 802.3at (Type 1 and Type 2) standards for Power Sourcing Equipment (PSE) and can deliver up to 48V DC and 25.5W of power to compliant Powered Devices (PD).Leverages Intel vPro technology for remote management and troubleshooting capabilities. Improve bandwidth for data-intensive applications, network sharing, FTPs, online or local storage/backup, and the streaming of online content.Access up to 2.5GBASE-T speeds using Cat5e (or better) cabling, to maximize existing networks and equipment.Connect Power over Ethernet enabled IP cameras, phones, or Wireless Access Points.Provide power to remote powered devices that require a PoE power source.Add multi-gigabit connectivity to a desktop or server.Compatible with Windows 10, 11; Windows Server 2019, 2022; Linux 5.8.x and up.Box contains: network card, low-profile bracket, quick start guide.2-year manufacturer limited warranty.This card supports the following advanced features: PXE Boot, WoL, VLAN tagging, 9 K jumbo frame, full-duplex, and Intel vPro technology..This 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity. The variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Utilize existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration.
The Intel Ethernet Network Adapter I226-T1 is ideally suited for personal computers and workstations used for enterprise, gaming, and home networks. These systems require more bandwidth than ever before. This ultra-compact, easy-to-integrate PCIe 3.1 x1 adapter, is a cost-effective networking solution for speeds up to 2.5GbE. The I226-T1 is also designed with a ventilated bracket, for increased efficiency and reduced power consumption..Ethernet Network Adapter.Maximum Data Transfer Rate: 2.50 Gbit/s.Network Technology: 2.5GBase-T.Form Factor: Plug-in Card.Bracket Height: Low Profile and Full Height.Device Supported: Computer/Workstation.Chipset Model: I226-LM.Host Interface: PCI Express 3.1 x1.Number of Network (RJ-45) Ports: 1
Intel provides data centers worldwide with innovative Ethernet components and solutions that are extensively tested for network interoperability, reliability, and performance. Intel Ethernet controllers, adapters and accessories deliver speeds from 1 to 100GbE - with versatile capabilities to optimize workload performance..Intel X710 Ethernet adapter delivers high speeds and versatile capabilities to optimize workload performance.Data rate per port: 10GbE/5GbE/2.5GbE/1GbE/100Mb.Equipped with four Ethernet ports.Compatible with motherboards equipped PCIe x8 system interface.Features: On-chip QoS and Traffic Management, Flexible Port Partitioning, Virtual Machine Device Queues (VMDq), PCI-SIG SR-IOV Capable, Intel Data Direct I/O Technology, Intelligent Offloads, Storage Over Ethernet (iSCSI, NFS).Cabling type: RJ45 CAT-6, CAT-6a, CAT-5e up to 328'.5-year manufacturer limited warranty
This 2.5GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity. Variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Leverage existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration..One-port 2.5Gbps NBASE-T PCIe network card with Intel I225-V chip.Provides Ethernet speeds up to 2.5Gbps.Has a one RJ-45 port.OS compatibility: Windows 10, 11, Windows Server 2019, 2022, Linux 5.8.x and up (LTS versions only), and VMware ESXi 7.0.Meets or exceeds the RoHS, and WEEE standards.The PCIe network card leverages Intel vPro technology for remote management and troubleshooting capabilities.The card ships in a standard profile bracket and includes a low-profile bracket for installation into small form factor systems and servers.LAN card features built-in heat sink to keep the controller chip cool for optimal performance.Includes PCIe network card, low-profile bracket, and quick-start guide.2-year manufacturer limited warranty
This 2.5GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity. Variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Leverage existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration..One-port 2.5Gbps NBASE-T PCIe network card with Intel I225-V chip.Provides Ethernet speeds up to 2.5Gbps.Has a one RJ-45 port.OS compatibility: Windows 10, 11, Windows Server 2019, 2022, Linux 5.8.x and up (LTS versions only), and VMware ESXi 7.0.Meets or exceeds the RoHS, and WEEE standards.The PCIe network card leverages Intel vPro technology for remote management and troubleshooting capabilities.The card ships in a standard profile bracket and includes a low-profile bracket for installation into small form factor systems and servers.LAN card features built-in heat sink to keep the controller chip cool for optimal performance.Includes PCIe network card, low-profile bracket, and quick-start guide.2-year manufacturer limited warranty
StarTech.com® Server network adapter card features two RJ-45 female Ethernet ports and offers full duplex support. Card offers a data transfer rate of 2000 Mbps for full-duplex transmission and 1000 Mbps for half-duplex transmission..Dimensions: 4.7"(H) x 0.7"(W) x 3.6"(L).Chipset ID: Realtek - RTL8111E, Asmedia - ASM1182E.Host interface: PCI-Express x1, Network technology: 10/100/1000Base-T- Gigabit Ethernet, Maximum data transfer rate: 2000 Mbps (full-duplex), 1000 Mbps (half-duplex).Interface/ports: 2 x RJ-45 network, Connector type: 1x PCI-Express x1 male.Form factor: Plug-in card.Device supported: Server.Performance: Auto MDIX, full-duplex support, Jumbo frame support: 9K max.Supported protocols: IEEE 802.1Q VLAN tagging, IEEE 802.1P layer 2 priority encoding and IEEE 802.3x full-duplex flow control.Card type: Standard Profile (LP bracket included), Port style: Integrated on card, Industry standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, PCI express base specification 2.0.Optional low-profile/half-height bracket that can be used for installation into a standard or small form-factor computer chassis.Indicators: LED: 2 - Green - Link/Activity, 2 - Yellow - Gigabit Mode.Software: OS Compatibility: Windows® 8.1 / 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), 2000 Windows® Server 2012, 2008 R2, 2003(32/64), Mac OS 10.4 and up, Linux 2.4.x and up.System and cable requirements: Available PCI-Express slot.Environmental: Temperature: Operating: 0 deg C to 70 deg C (32 deg F to 158 deg F), Storage: 0 deg C to 100 deg C (32 deg F to 212 deg F), Humidity: 10 approx. 90% RH.Includes 1 x PCIe network card, 1 x low-profile bracket, 1 x driver CD, 1 x instruction manual.Weight: 1.8 oz..Warranty: 2 years limited.StarTech.com® Server network adapter card contains two Ethernet ports and has a PCI express slot that allows you to connect it to client, server or a workstation.
The Plugable USB2-E100 USB 2.0 LAN wired network adapter offers full 10/100 Mbps fast Ethernet performance over the USB 2.0 480 Mbps bus. It features RJ-45 network port that connects to any 10/100 Mbps network. This adapter works with all Wii and Wii U consoles with no drivers. It offers 32/64-bit drivers for Microsoft Windows® 10, 8.x, 7 and XP. This adapter is compatible ASIX AX88772 chipset..Network adapter for ASIX AX88772 chipset.Suitable for use with all Wii and Wii U consoles, computer/notebook/tablet.Comes in black color.Interfaces/ports: one USB 2.0, one RJ-45.Network technology: 10/100Base-TX.Form factor: Portable.Includes network adapter and drivers CD-ROM
The SBFTF1010-130 Redundant Link Protector is a 10/100 Ethernet fault-tolerant transceiver that significantly reduces network down time by adding a new level of redundancy to 10/100 Ethernet connections. The Redundant Transceiver has three ports: one for the critical (main) device, one for the default (primary) path to the critical device, and another (backup) for the backup path. It is a smart device that will not send any signal on a path that is inactive. If the primary path loses its link, then the transceiver will switch to the backup path in approximately 189 milliseconds. When the primary path re-establishes its link, the Redundant Link Protector will automatically switch back to the primary path. Optional functionality, controlled via a dip switch, allows the unit to move from the fault-tolerant mode to a 3-port switch mode..Singlemode fiber with SC connector for secure long‑distance Ethernet transmission..Media converter designed for redundant Ethernet link protection with automatic failover between primary and backup paths..Supports 10 Mbps and 100 Mbps Fast Ethernet speeds with auto‑negotiation..Provides fiber connectivity up to 20,000 meters (20 km) over singlemode fiber..Fully supports Ethernet (10/100BASE‑TX), but does not support Gigabit speeds..Operates with low power consumption of approximately 3 Watts..Offers high reliability with a Mean Time Between Failures of about 1,000,000 hours..Operates at 1310 nm wavelength optimized for singlemode fiber transmission..Lifetime Limited Warranty
The SBFTF Series is a that provides an interface between 10/100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into 10/100 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10Base-T copper devices to connect to 100Base-FX fiber..SFP fiber port, allowing flexibility to choose single‑mode or multimode fiber depending on the installed SFP module.A stand‑alone Fast Ethernet media converter designed to connect copper Ethernet devices to fiber networks, supporting both half‑duplex and full‑duplex environments..Supports 10 Mbps and 100 Mbps operation, with automatic rate conversion for legacy copper devices..Distance depends on the SFP module used; with single‑mode SFPs, up to 120 km is supported, while multimode SFPs typically reach 2 km.Built for Fast Ethernet (100 Mbps); not intended for Gigabit Ethernet operation..Operates from a 12V input with low power draw, suitable for energy‑efficient deployments..Designed for high reliability; Lantronix converters typically feature long MTBF ratings suitable for continuous operation..Determined by the installed SFP; common options include 850 nm (multimode) or 1310/1550 nm (single‑mode)..Lifetime Limited Warranty
The StarTech USB 3.0 to Gigabit network adapter offers fast, reliable network access for your MacBook, Chromebook or tablet. It supports Windows, Mac and Chrome OS and feature sleek aluminum design with silver finish. You can quickly access very large files over a Gigabit network, saving valuable time every day. The Realtek RTL8153 chipset ensures reliable performance and offers up to 9K jumbo frame support. This USB31000SA network adapter adds a single RJ45 Ethernet port to your computer through your USB 3.0 port..Gigabit network adapter is perfect for office or home use.Dimensions: 0.7 degree H x 1 degree W x 2.6 degree D.Compatible with PC.Aluminum housing with silver finish, the network adapter is the perfect companion for your MacBook, Chromebook or Tablet.System requirements: Windows 10/8.1/8/7/Vista/XP, 98SE, Server 2012, 2008 R2, Mac 10.6 - 10.11, Linux Kernel 2.6.25 - 3.17.0, Google Chrome , PC.Has one 9-pin Type A male USB 3.0, one female RJ-45 connector.Chipset ID: Realtek RTL8153, Network technology: 10/100/1000 Mbps, Jumbo frame support: 9K max., Max. distance: 330'.Maximum data transfer rate: 2 Gbps, Full duplex support, Auto MDIX, Form factor: Attached cable/desktop.LED indicators: 1 x power - blue, 1 x link - green, 1 x activity - amber.USB 3.0 to Gigabit network adapter provides a single RJ45 Ethernet port to computer through USB 3.0 port.Network adapter supports full Gigabit bandwidth by harnessing the performance of 5 Gbps speed USB 3.0.Access large files over a Gigabit network, saving valuable time every day, realtek chipset gives the assurance of reliable performance.Network adapter chipset offers native driver support, so you don't have to worry about installing additional software.Temperature: 0 to 70 deg C operating, -55 to 125 deg C storage, Humidity: 20 to 90%.Contains one USB 3.0 Gigabit NIC, one quick install guide.Meets CE, FCC, RoHS, C-Tick certifications and standards.Weight: 1.3 oz..Comes with 2 years warranty
The SBFTF Series is a stand-alone media converter that provides an interface between 10/100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into 10/100 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10Base-T copper devices to connect to 100Base-FX fiber..Singlemode fiber with SC connector..Stand‑alone Fast Ethernet media and rate converter bridging 10/100Base‑TX copper to 100Base‑FX fiber..Supports 10 Mbps and 100 Mbps Fast Ethernet speeds..120,000 meters (120 km) over singlemode fiber..Ethernet supported (10/100Base‑TX to 100Base‑FX), not Gigabit..Typical operating consumption 3 Watts..High reliability with MTBF around 1,000,000 hours..Operates at 1310 nm wavelength for singlemode fiber transmission..Lifetime Limited Warranty
The SBFTF Series is a that provides an interface between 10/100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into 10/100 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10Base-T copper devices to connect to 100Base-FX fiber..100Base‑FX fiber, SFP slot (supports multimode or single‑mode modules).Stand‑alone Fast Ethernet Media Converter, bridges 10/100Base‑TX copper to 100Base‑FX fiber.10 Mbps / 100 Mbps copper, 100 Mbps fiber.120,000 meters (120 km) depending on fiber type.Fast Ethernet (10/100Base‑TX to 100Base‑FX), not Gigabit.Power Consumption 3 Watts (12V DC input).1310 nm (standard for 100Base‑FX single‑mode/multimode modules).Lifetime Limited warranty
TRENDnet USB 2.0 to Fast Ethernet Adapter, Supports Windows And Mac OS, ASIX AX88772A Chipset, Backwards Compatible With USB 1.0 And 1.0, Full Duplex 200 Mbps Ethernet Speeds, Black, TU2-ET100.Connect your USB-enabled device at fast Ethernet speeds.Quickly share data, music, movies, and more.Compact design is ideal for on the go professionals.Supports Wake on LAN.No bulky power brick—compact adapter powered by USB port.Proposition 65 Warning for California Consumers.INTERFACE: 1 x 10/100 Mbps Fast Ethernet Port, 1 x USB Type A Port (Male).2 YEAR PROTECTION: This USB 2.0 to 10/100 Fast Ethernet LAN Wired Network Adapter includes 2 Years of TRENDnet manufacturer protection..Interfaces/Ports:Host Interface: USB,Total Number of Ports: 1,Network (RJ-45): Yes,Number of Network (RJ-45) Ports: 1.Compliant with Windows 98SE/ME/2000/XP, Mac OS X
The SBFTF Series is a stand-alone media converter that provides an interface between 10/100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into 10/100 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10Base-T copper devices to connect to 100Base-FX fiber..Supports single‑mode fiber with an SC connector, enabling long‑distance transmission over optical fiber.Functions as an unmanaged stand‑alone Fast Ethernet media converter, bridging 10/100Base‑TX copper ports to 100Base‑FX fiber ports.Operates at 10 Mbps or 100 Mbps, with automatic rate conversion to support legacy copper devices.Extends network reach up to 20 km over single‑mode fiber.Designed for Fast Ethernet (100 Mbps) environments; not intended for Gigabit Ethernet.Operates from a 12V input; typical consumption is low, suitable for energy‑efficient deployments.While exact MTBF is not listed, Lantronix converters are designed for high reliability in continuous operation.Uses 1310 nm wavelength for single‑mode fiber transmission.Lifetime Limited Warranty
The Transition Networks® SBFTF1013-105-NA 2-port RJ-45 to SC standalone fast Ethernet media/rate converter extends network distance up to 120 Km. It features auto-negotiation for automatic configuration to achieve the best mode of operation over a link and AutoCross™ that automatically detects/configures the twisted pair port to the correct MDI or MDI-X configuration. It supports link pass-through and far end fault for efficient troubleshooting..Stand-alone media/rate converter allows users to integrate fiber optic cabling into 10/100Base-TX copper environments.Dimensions: 1"H x 3.25"W x 4.8"D.Suitable for use with PC.Comes in black color.Interfaces/ports: One 10Base-T or 100Base-TX RJ-45, one multi mode SC.Power supply: External AC/DC, 12 VDC, 0.8 A min.LEDs: PWR (power), FD (fiber duplex), LNK/ACT, CD (copper duplex).Data rates: 10 Mbps, 100 Mbps (layer 2).IEEE standards: IEEE 802.3, Switches: Auto-negotiation on/off, half or full-duplex with auto-negotiation off, 10/100 Mbps with auto-negotiation off.Packet size: 2044 bytes untagged, 2048 bytes tagged, RAM buffer: 512KB.Maximum distance supported: 1.24 mile.Features auto-MDI/MDIX, auto-negotiation, link pass through and far-end-fault (FEF) detection.Temperature: 0 - 50 deg C operating, Humidity: 5 - 90 percent non-condensing.Meets UL, FCC Class A, VCCI Class 1, CISPR22/EN55022, Class A, EN55024, EN61000, CE Mark certifications and standards.Weight: 2 lbs..Comes with lifetime warranty
Cisco 100BASE-FX small form-factor pluggable (SFP) fast Ethernet interface converter is a hot-swappable device that plugs into a gigabit Ethernet SFP port on Cisco catalyst 3750 series, 3560 series, and 2970 series switches..Interfaces/ports: 1 x LC duplex 100Base-FX.Dimensions: 0.4"(H) x 2.2"(W) x 1/2"(D).Compatibility: Cisco catalyst 3750, 3560, and 2970 series switches.Connectivity media: 62.5/125 um multi mode fiber, 50/125 um multi mode fiber.Transmit (dBm): 50/125-micron: -23.5 min, -14max, 62.5/125-micron: -20 min, -14max, receive (dBm): 50/125-micron: -33.35 min, -11.8 max, 62.5/125-micron: -33.35 min, -11.8 max.Distance supported: 6.5'.Operating temperature: 32 - 158 deg F, storage temperature: -40 - 185 deg F.Surge current: 350 typical, wavelength (nm): 1270 min, 1300 typical, 1380 max.Power consumption: 1.5 W per port.Input voltage: 3.3 V - 3.5 V device, 3.3 V typical device.Input current: 405 mA typical, 450 mA maximum.Data transfer rate: 100 Mbps fast Ethernet full duplex.MTBF: 12,820,512 hours.Form factor: Hot-swappable.System requirements: Cisco IOS software release 12.2(20)SE1.Application/usage: Data networking.Regulatory and standards compliance: IEC 60825-1.SFP fast ethernet interface converter 100FX SFP on GE SFP ports for DSBU switches.
The SBFTF1010-130 Redundant Link Protector is a 10/100 Ethernet fault-tolerant transceiver that significantly reduces network down time by adding a new level of redundancy to 10/100 Ethernet connections. The Redundant Transceiver has three ports: one for the critical (main) device, one for the default (primary) path to the critical device, and another (backup) for the backup path. It is a smart device that will not send any signal on a path that is inactive. If the primary path loses its link, then the transceiver will switch to the backup path in approximately 189 milliseconds. When the primary path re-establishes its link, the Redundant Link Protector will automatically switch back to the primary path. Optional functionality, controlled via a dip switch, allows the unit to move from the fault-tolerant mode to a 3-port switch mode..Singlemode fiber with SC connector for long‑distance Ethernet transmission..Media converter providing redundant Ethernet link protection with automatic failover..Supports 10 Mbps and 100 Mbps Fast Ethernet speeds..20,000 meters (20 km) over singlemode fiber..Fully supports Ethernet (10/100BASE‑TX), but does not support Gigabit speeds..Operates with low power consumption of approximately 3 Watts..Offers high reliability with a Mean Time Between Failures of about 1,000,000 hours..Operates at 1310 nm wavelength optimized for singlemode fiber transmission..Lifetime Limited Warranty
The SBFTF Series is a stand-alone media converter that provides an interface between 10/100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into 10/100 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10Base-T copper devices to connect to 100Base-FX fiber..Supports multimode fiber with an LC connector, enabling shorter‑range fiber transmission compared to single‑mode..An unmanaged stand‑alone Fast Ethernet media converter that bridges 10/100Base‑TX copper ports to 100Base‑FX multimode fiber ports..Operates at 10 Mbps or 100 Mbps, with automatic rate conversion for legacy copper devices..Extends network reach up to 2 km over multimode fiber..Designed for Fast Ethernet (100 Mbps) environments; not intended for Gigabit Ethernet..Lantronix converters are engineered for high reliability in continuous operation..Uses 1310 nm wavelength for multimode fiber transmission.
The E-100BTX-HT Series is a Hardened Ethernet stand-alone media converter that provides an interface between 100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into extreme 100Base-TX copper environments, by supporting an operating temperature range of -25°C to 65°C. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Multimode fiber with SC connector for 100Base‑FX links.Hardened Fast Ethernet media converter bridging copper (RJ‑45) to fiber (SC) in industrial deployments.100 Mbps Fast Ethernet (IEEE 802.3u compliant).2,000 meters (2 km) over multimode fiber.Ethernet only, Fast Ethernet standard (not Gigabit).Power Consumption 4 Watts typical.1,400,000 hours reliability rating for rugged environments.1310 nm standard for 100Base‑FX multimode fiber.Lifetime Limited Warranty
The E-100BTX-FX-05(HT) is a Hardened Ethernet stand-alone media converter that provides an interface between 100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into extreme 100Base-TX copper environments, by supporting an operating temperature range of -25°C to 65°C. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Multimode fiber with SC connector for 100Base‑FX links.Hardened Fast Ethernet media converter bridging copper (RJ‑45) to fiber (SC).100 Mbps Fast Ethernet (IEEE 802.3u compliant).2,000 meters (2 km) over multimode fiber.Ethernet only, Fast Ethernet standard (not Gigabit).4 Watts typical, low‑power industrial design.Requires power cycling for safe removal.1,400,000 hours reliability rating for rugged environments.1310 nm standard for 100Base‑FX multimode fiber.Lifetime Limited Warranty
The Transition Networks TN-GLC-FE-100FX small form factor pluggable (SFP) Transceiver modules is designed to install in any SFP port allowing for 100Base-FX interfaces to the network through the SFP connector..Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.With its thicker diameter to carry the light of multiple wavelengths, multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity.Featuring Fast Ethernet port to enhance the data transfer rate by up to 100 Mbps for connectivity.With 100Base-FX technology, enjoy up to 100 Mbps data transfer rate over optical fiber cable
The Brainboxes PE‑508 is a pure embedded 8‑port Fast Ethernet switch designed for seamless integration into industrial and embedded systems. Its compact PCB module design allows OEMs, engineers, and system integrators to save space while delivering robust network performance..8 auto-sensing Fast Ethernet ports for seamless connectivity in embedded and industrial applications..No configuration needed – simply integrate and power up for instant network operation..Tiny form factor (0.49 x 2.17 x 2.17 inches, 0.077 lb) allows integration into space-constrained systems..Supports full-duplex operation on all ports for smooth, simultaneous two-way data transfer..Operates in extreme temperatures from ‑40°C to +85°C, making it perfect for harsh environments..Low power consumption (~1.3 W @ 3.3V / ~2.5 W @ 5V) helps reduce system energy costs..Green link/activity LEDs make it simple to check port status at a glance..CE and RoHS certified, ensuring reliable performance and industry compliance..Ideal for industrial automation, robotics, CCTV, and building control applications where space, reliability, and low power matter.
The Plugable USB3-E1000 Gigabit Ethernet network adapter supports all USB 3.0 power saving modes and 10/100/1000 with auto-sensing. It features IPv4/IPv6 checksum offload engine, crossover detection and auto-correction, TCP large send offload and IEEE802.3az EEE that allows the device to enter a low power idle state to reduce power. Using proprietary burst transfer mechanism, this adapter offers high performance packet transfer rate over USB bus. It supports Microsoft Windows 8.1, 8, 7, Vista and XP OS..Network adapter is perfect for faster HD video streaming, gaming, web browsing, network storage and more.Suitable for use with computer/notebook.Comes in black color.Host interface: USB 3.0, Number of ports: One RJ-45.Network technology: 10/100/1000Base-T.Media type supported: Twisted pair.Form factor: Portable.High performance packet transfer rate over USB bus using proprietary burst transfer mechanism.Supports all USB 3.0 power saving modes (U0, U1, U2 and U3) and 10/100/1000 with auto-sensing (IEEE 802.3, 802.3u and 802.3ab).Features: IPv4/IPv6 checksum offload engine, crossover detection and auto-correction, TCP large send offload & IEEE 802.3az energy efficient Ethernet.Supports dynamic cable length detection and dynamic power adjustment Green Ethernet (Gigabit mode only).Contains standard USB type A connector to PC and female RJ45 jack to network, quick install guide, driver disk for Windows and Mac
The Transition Networks® SGFEB1040-130-NA 1-port RJ-45 to SFP standalone fast Ethernet media/rate converter features auto negotiation, autocross, link pass through, far end fault and remote fault detect for efficient troubleshooting. It supports multimode or single mode fiber and IEEE802.3az Ethernet. This converter offers data rate of 10/100/1000 Mbps for copper and 1000 Mbps for fiber..Stand-alone media/rate converter is a cost effective method for integrating 1000Base-SX/LX fiber into a 10/100/1000Base-T copper environment.Dimensions: 1"H x 3.25"W x 4.8"D.Suitable for use with PC.Comes in black color.Interfaces/ports: One 10/100/1000Base-T RJ-45, one 100/1000Base-X SFP slot.Power supply: 7.5 - 24 VDC, provided by wide input AC wall mount adapter, Consumption: 2.2 W.LEDs: PWR (power), LACT (fiber link/activity), RJ-45 upper left (green/amber), RJ-45 upper right (speed).Data rates: 10/100/1000 Mbps (copper), 1000Mbps, 100Mbps also supported via SFP port (fiber).Form factor: Rack-mountable, wall mountable, rail-mountable, desktop.IEEE standards: IEEE 802.3, 802.3ab, 802.3u, 802.3z, 802.3az, Switches: Auto-negotiation enable/disable, link pass through enable/disable.Frame size: 10260 byte jumbo frames, RAM buffer: 512KB, MAC addresses: 8K.Features auto-MDI/MDIX, auto-negotiation, link pass through, far-end-fault (FEF) detection and remote fault detect.Temperature: 0 - 50 deg C operating, -15 - 65 deg C storage, Humidity: 5 - 95 percent non-condensing.Meets EN55022 Class A, EN55024, FCC Class A, CE Mark, UL, UL60950, CSA certifications and standards.Weight: 2 lbs..Comes with lifetime warranty
Startech.com® USB 3.0 Gigabit ethernet adapter works with 10/100/1000 Mbps networks and offers backward compatibility with USB 2.0 computer systems. Adapter has highly portable design and requires no external power adapter..Network adapter interface: RJ45 (Gigabit Ethernet).Network adapter speed: 1 Gbps (gigabit Ethernet).Platform supported: PC, Mac.Chipset ID: ASIX - AX88179.Connector type: 1 x RJ-45 female, 1 x USB 3.0 A (9 pin, SuperSpeed) male.Performance: Auto MDIX, 10/100/1000 Mbps compatible networks, full duplex support, 100 m max distance, 1 Gbps (gigabit Ethernet) maximum data transfer rate, USB 3.0 - 5 Gbps.OS compatibility: Windows 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), Windows Server 2008 R2, 2003(32/64), Mac OS 10.6 - 10.8, Linux Kernel 2.6.14 - 3.5.0.Temperature: 0 - 50 deg C (32 - 122 deg F) operating,0 - 70 deg C (32 - 158 deg F).System and cable requirements: Host computer system with an available USB 3.0/2.0 port.Media type supported: Twisted pair.Dimensions: 1"(H) x 0.9"(W) x 2.7"(D).Package contents: USB 3.0 to gigabit Ethernet NIC network adapter - 10/100/1000 Mbps, 1 x driver CD, 1 x instruction manual.Certifications and standards: IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3az.Weight: 0.70 oz..Warranty: 2 years limited.Startech.com® USB 3.0 Gigabit ethernet adapter adds a single RJ45 Ethernet port to a USB-enabled computer system and provides gigabit network connections at full bandwidth when used with USB 3.0 host connection.
The E-100BTX-HT Series is a Hardened Ethernet stand-alone media converter that provides an interface between 100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into extreme 100Base-TX copper environments, by supporting an operating temperature range of -25°C to 65°C. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Multimode fiber with SC connector for 100Base‑FX links.Hardened Fast Ethernet media converter bridging copper (RJ‑45) to fiber (SC) in industrial environments.100 Mbps Fast Ethernet (IEEE 802.3u compliant).2,000 meters (2 km) over multimode fiber.Ethernet only, Fast Ethernet standard (not Gigabit).4 Watts typical, low‑power design for rugged deployments.1,400,000 hours reliability rating for extended service life.1310 nm standard for 100Base‑FX multimode fiber.Lifetime Limited Warranty
The E-100BTX-HT Series is a Hardened Ethernet stand-alone media converter that provides an interface between 100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into extreme 100Base-TX copper environments, by supporting an operating temperature range of -25°C to 65°C. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Multimode fiber with SC connector for 100Base‑FX links.Hardened Fast Ethernet media converter bridging copper (RJ‑45) to fiber (SC) in industrial deployments.100 Mbps Fast Ethernet (IEEE 802.3u compliant).2,000 meters (2 km) over multimode fiber.Ethernet only, Fast Ethernet standard (not Gigabit).Power Consumption 4 Watts typical.1,400,000 hours reliability rating for rugged environments.1310 nm standard for 100Base‑FX multimode fiber.Lifetime Limited Warranty
Ciscoâ„¢ 100Base-X small form-factor pluggable is optically interoperable with respective 100Base-X ethernet that interfaces on the same link. Plug has max transfer distance of 32810' and optical wave length of 1310 nm..1 x LC duplex 100Base-LX10.Optically interoperable with respective 100Base-X Ethernet interfaces on the same link.Connectivity technology: Wired.Dimensions: 0.3"(H) x 0.5"(W) x 2.2"(D), Form factor: Hot swappable.Max transfer distance: 32810', Optical wave length: 1310 nm.Temperature: 32 -122 deg F operating.Data transfer rate: 100Mbps fast ethernet, Connectivity media: G.652 micrometer single mode optical fiber.Compatibility: Catalyst 2960, 2960-24, 2960-48, 2960G-24, 2960G-48, 2960S-24, 2960S-48, 3560, 3560-12.Application/usage: Data networking.Interchangeable with other 100BASE-X SFPs on the same line card.Certification and Standards: IEEE 802.3, IEEE 802.3ah.Ciscoâ„¢ 100BASE-LX10 SFP XCVR module is a pluggable device that operates on ordinary multimode fiber-optic link and is a hot-swappable input/output device that plugs into fast ethernet ports.
The ME-ISW Series is a hardened Fast Ethernet Mini media converter that provides a cost effective, plug-and-play media conversion between 10/100Base-TX ports and 100Base-FX ports for hardened or outdoor 10/100 environments. With its supported operating temperature range of -40°C to 75°C, the Mini offers a space saving alternative for converting copper to fiber in extreme environments. NDAA Compliant, TAA Compliant.DIN Rail clip and Velcro included.Multiple mounting options:.Available with LC, ST or SC fiber interfaces and available for multimode or single mode fiber.No configuration required.Small mechanical size allows use in enclosures with space constraints
Using the 10/100/1000 base -T network technology, the StarTech USB 3.0 to Dual Port Adapter is able to operate with different speeds as it supports a twisted pair media. This adapter uses USB ports for easy installation of the device and works as an easy plug-and-play solution. The copper wiring ensures greater conductivity. Working at a data transfer rate of 5 Gbps, this Ethernet adapter enhances efficiency and helps to establish a strong connection without signal failures. It provides connectivity to devices even at a distance with a maximum distance of 330 feet..1 x 9-pin Type A female USB 3.0 A and 1 x 9-pin Type A male USB 3.0 A for better connectivity.Desktop form factor offers universal use.USB 3.0 interface compatible with most modern computers.Uses the 10/100/1000 Mbps network technology to match different speeds.Works under most environments at an operating temperature of 0 degree C to 50 degree C.Comes in a plastic enclosure for added durability.Has 3 terminals for enhanced connectivity.Compliant Standards: FCC, CE, IEEE 802.3i/3u/3ab/3x/1Q, RoHS.Dimensions: 0.6"H x 2.4"W x 0.6"D.Weighs light and portable at 2.1 oz..Comes with a 2-year limited warranty.The StarTech 8" USB 3.0 to Dual Port Gigabit Ethernet Adapter comes with a dual port that can simultaneously connect two different networks through a single USB 3.0 port.
The E-100BTX-FX-06 is a stand-alone media converter that provides an interface between 100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into 100Base-TX copper environments. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Singlemode fiber with SC connector for 100Base‑FX links.Hardened Fast Ethernet media converter bridging copper (RJ‑45) to fiber (SC) in industrial deployments.100 Mbps Fast Ethernet (IEEE 802.3u compliant).15,000–20,000 meters (15–20 km) over singlemode fiber.Ethernet only, Fast Ethernet standard (not Gigabit).Power Consumption 4 Watts typical.1,400,000 hours reliability rating for rugged environments.1310 nm standard for 100Base‑FX singlemode fiber.Lifetime Limited Warranty
The Comprehensive® USB31-RJ45 black USB 3.1 type-C male to RJ45 network adapter features 10/100/1000Mbps Gigabit Ethernet for high-speed connection and supports USB super speed modes. This USB powered network adapter works with PC and Mac. It is backward compatible with older USB computer systems..Black network adapter ensures reliable data communication.Interface: Connector type 1: USB C male, Connector type 2: RJ-45 female.RoHS Compliant.Performance grade: Great, Compatible networks: Half/full duplex 10/100/1000 Mbps operation.Device supported: PC and Mac.Jacket: PVC, Jacket color: Black.Delivers high speed connection for USB 3.1 Type-C peripherals as an Ethernet interface while integrating 10/100/1000 Mbps Gigabit Ethernet.Supports USB super speed modes and has plug-and-play compatibility.USB powered - no power supply needed for optimum performance.Weight: 0.3 lbs..Comes with 2 years warranty
The Comprehensive® USB 3.0 to Gigabit Ethernet adapter in black, features 9-pin SuperSpeed male USB 3.0 A interface for input and RJ-45 female interface for output. It features plastic chassis for durability. This adapter features compact and lightweight design for maximum portability. It has operating temperature range of 0 - 40 deg C. It is compatible with half/full duplex 10/100/1000 Mbps network. It supports all USB 3.0 power saving modes like U0, U1, U2 and U3. It integrates 10/100/1000 Mbps Gigabit Ethernet MAC/PHY networks. It is backward compatible with older USB 2.0/1.1/1.0 computer systems. This adapter supports Mac, Windows/8/7/XP, Linux and newest Macbook Air OS..USB 3.0 to gigabit Ethernet adapter for fast connectivity.Connections: Input: One USB 3.0 A (9-pin; SuperSpeed) Male, Output: One RJ-45 Female.Host Interface: USB 3.0.Compatible Networks: Half/full duplex 10/100/1000 Mbps operation, Compliant to USB interface version 1.1/2.0/3.0.OS compatibility: Compatible with Mac OS/Windows/8/7/XP/Linux/newest Macbook Air.Dimensions: 0.6"H x 1"W x 2.6" D.Silkscreen Comes in black color.Chassis material: Plastic.Operating temperature: 0 - 40 deg C/32 -104 deg F, Storage temperature: -20 - 60 deg C/-4 - 140 deg F, Relative Humidity: < 80 percent RH.Power: USB powered.Integrates 10/100/1000 Mbps Gigabit Ethernet MAC/PHY and supports all USB 3.0 power saving modes (U0, U1, U2, U3), USB super/high/full speed modes.High performance packet transfer rate over USB bus using proprietary burst transfer mechanism and has compact, lightweight design for portability.Weight: 0.27 lbs..Comes with 2 years warranty.Comes with 2 years limited warranty.COMPREHENSIVE CABLE® USB 3.0 to RJ-45 Gigabit Ethernet adapter in black color increases productivity by adding RJ45 ethernet port to a USB enabled computer system.
4XEMâ„¢ USB 3.0 to gigabit ethernet adapter supports 10/100/1000Base-T network technology. Adapter weighs about 0.95 oz and is compatible with all types of PCs..Network adapter interface: USB 3.0.Interfaces with USB 3.0.Dimensions: 2.6"(H) x 1"(W) x 1"(D).Ports: 1 x RJ-45 network port.Media and performance: Twisted pair cable.Network and communication: 10/100/1000base-T.Device supported: PC, Mac.Compatible with USB 3.0.USB 3.0 to gigabit ethernet NIC network adapter adds a single RJ-45 ethernet port to a USB-enabled computer system.Package includes: USB 3.0 to gigabit Ethernet NIC network adapter.Standards and certificates: CE, FCC, IEEE Standards: 802.1q, 802.3, 802.3i, 802.3u, 802.3ab, 802.3az, RoHS.Warranty: 3 years limited.4XEMâ„¢ USB 3.0 to gigabit ethernet adapter adds a single RJ45 ethernet port to a USB-enabled computer system and supports twisted pair media type.
Enable your USB Type-C Chromebook to connect to blazing fast 2.5Gbps Ethernet to ensure a secure and reliable network connection for virtual learning, video conferences, and video streaming. The Targus HyperDrive Ethernet adapter has been tested and certified Works with Chromebook, which means it meets Google's compatibility standards and works seamlessly with your Chromebook..Ethernet adapter with USB-C (USB 3.2 Gen 1) interface, supporting ultra-fast 2.5 Gigabit Ethernet speeds for reliable wired connectivity..Supports data transfer rates up to 2500 Mbps for ultra-fast and reliable network performance..Includes a single high-speed Ethernet port for wired network connectivity..Works With Chromebook Certified officially tested and approved by Google for seamless compatibility..Backed by a 2 year limited warranty..Premium aluminum enclosure for improved heat dissipation.2-year manufacturer limited warranty
Ciscoâ„¢ 100Base-LX10 rugged SFP module has wavelength of 1310 nm and is compatible with Ciscoâ„¢ IE 3000 series switches. Module is used in data networking and has single-mode optical fiber 100Base-LX10 media connectivity..Dimensions: 0.3"(H) x 0.5"(W) x 2.2"(D).For Cisco IE 3000 series switches.Hot-swappable when deployed, the switch or router does not have to reboot.Interfaces/ports: 1 x LC duplex 100Base-LX10.Application/usage: Data networking.Data transfer rate: 100 Mbps fast ethernet.Connectivity technology: Wired.Form factor: Hot-swappable.Connectivity media: Single-mode optical fiber 100Base-LX10.Wavelength: 1310 nm.Max transfer distance: 6.2 miles.Operating temperature: -40 - 185 deg F.Supports the Cisco quality ID feature that enables the switch or router to identify whether or not the SFP is a Cisco qualified SFP.Compliant and standards: IEEE 802.3, IEEE 802.3ah.Warranty: 90 days limited.Ciscoâ„¢ 100Base-LX10 rugged SFP module operates on ordinary single-mode fiber-optic link that spans up to 10 km long and has hot-swappable form factor.
USB to Ethernet Adapter, USB 3.0 to 10/100/1000 Gigabit Ethernet LAN Adapter, 1ft/30cm Attached Cable, USB to RJ45 Adapter.USB 3.0 network adapter adds an Ethernet port to your laptop or desktop computer at Gigabit speeds.USB to RJ45 adapter works with 10/100/1000 Mbps BASE-T networks; Status & Activity LEDs; 9K Jumbo Frames | VLAN Tagging | Wake on LAN | Auto MDIX.USB NIC adapter with built-in 11.8in cable | USB bus powered.USB to Ethernet Adapter NIC uses Realtek RTL8153 for Plug and Play / No Driver install on Windows/macOS/Ubuntu/Chrome OS.USB-A 3.2 Gen 1 and backward compatible with USB 2.0/1.1.USB Network Adapter | Gigabit | USB 3.0/3.2 Gen 1 | RJ45
The Broadcom NetXtreme Gigabit Ethernet Adapters are a family of high performance PCIe and OCP adapters. The adapters are available with either two ports or four ports and are supported on ThinkSystem and System x servers. Did you know? The NetXtreme Quad Port Ethernet Adapter is an ideal way to implement a virtualization solution using your existing Gigabit Ethernet network. With four copper-based Gigabit ports on a single PCI Express 2.0 x4 interface, the adapter provides the density and capacity you need to support large numbers of virtualized systems on one server..This 2000MB/s bandwidth adapter is ideal for PCs with PCI Express 2.0 x4 slots, ensuring top level network connectivity for your desktops.With quad ports on a single card, save valuable expansion slots on your system for other purposes.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10/100/1000Base-T technology get up to 1000Mbps data transfer rate over the twisted pair cable
The Plugable USB-C Ethernet adapter is a great choice for users to add Gigabit Ethernet to their computer via USB Type-C. Built on the Realtek RTL8153 chipset, this adapter is capable of speeds of 10/100/1000Mbps for fast, stable Ethernet access. The small, compact size is great for travel and flexible flat cable allows the adapter to adapt to your workspace. This adapter provides a true plug and play experience without the need for additional driver installation. This makes the USBC-TE1000 a perfect match for macOS, Windows 11 and 10, Linux, and ChromeOS..This USB Type-C Ethernet adapter is a great choice for users to add Gigabit Ethernet to their computer via USB Type-C.Adds a wired Gigabit Ethernet port to your USB Type-C and Thunderbolt 3 systems.Faster and more reliable than Wi-Fi connections up to 1Gbps (10/100/1000Mbps); link and activity LEDs.RJ45 to USB Type-C cable offers automatic plug-and-play installation with no additional download needed on Windows 11/10, macOS, and ChromeOS.Powered by the Realtek RTL8153 chipset for proven outstanding compatibility.Small, lightweight Thunderbolt 3 to Ethernet adapter is perfect for travel and constructed with advanced materials, including a flat flexible printed circuit cable, providing durability while fitting into any workspace.2-year manufacturer limited warranty