Pole Mounts for Axis Cameras
7 results
Robust and safe pole installation. Suitable for indoor and outdoor use. Impact-resistant to prevent vandalism. Cable gasket to prevent insect infestation. Support for 1.5" NPS threaded Axis pendant kits. The outdoor-ready AXIS T91B67 Pole Mount has a 1.5" NPS threading for a wide range of Axis pendant kits for Axis fixed dome and panoramic cameras. Thanks to its impact-resistant and outdoor-proven material, the mount can be used in both indoor and outdoor environments. AXIS T91B67 is intended for poles with a diameter between 65-165 mm (2 1/2-6 1/2 in), and also for beams. It features 3/4" conduit side entries for protected cable runs, and a closed back with cable gasket for protection against insect infestation. The pole mount is tightened with two marine-grade (SS316L) stainless steel straps with TX30 screw interface for ease and secure installation..Device Supported: Network Camera.Maximum Load Capacity: 33.07 lb.Weight (Approximate): 2.65 lb
Suitable for wide range of pole diameters. Safe and easy to install. IK10-rated vandal resistance . NEMA 4X-rated corrosion protection. Axis stainless steel straps included. AXIS T91B47 Pole Mount is designed for both indoor and outdoor use. It is available in two versions, one with steel straps for poles between 50-150 mm (2-6 in) in diameter and one with steel straps for poles between 100-410 mm (4-16 in) in diameter. AXIS T91B47 is tightened with two marine-grade (SS316L) stainless steel straps with TX30 screw interface for ease and secure installation. When installing an Axis fixed dome or fixed bullet camera, there is no need for additional accessories like pendant kits; AXIS T91B47 fits the back side of the camera to ensure a cost efficient solution..Device Supported: Camera Mount, Camera Housing, Speaker, Radar Detector, Network Camera.Limited Warranty: 3 Year.Maximum Load Capacity: 33.07 lb
Save time when installing multiple Axis cameras. Drill fewer holes in walls. Compatible with a wide range of Axis cameras and Axis mounts. Robust design and impact resistant. Suitable for indoor and outdoor use. AXIS T94V01C Dual Camera Mount is a highly versatile accessory that allows back-to-back installation of two Axis cameras for panoramic coverage. It is compatible with a wide range of Axis network cameras, including dome cameras, box cameras, and bullet cameras. It can be easily combined with diverse Axis mounting accessories with 1.5" NPS threaded interface, for mounting on walls, poles, and under ceilings. AXIS T94V01C Dual Camera Mount has an IK10 rating for impact resistance, which safeguards it against vandalism. It is suitable for both indoor and outdoor use..Device Supported: Camera Housing, Network Camera, Camera Mount.Maximum Load Capacity: 22.05 lb.Weight (Approximate): 1.76 lb
Suitable for wide range of pole diameters. Safe and easy to install. IK10-rated vandal resistance . NEMA 4X-rated corrosion protection. Axis stainless steel straps included. Ease of installation: AXIS T91B47 Pole Mount is designed for both indoor and outdoor use. It is available in two versions, one with steel straps for poles between 50-150 mm (2-6 in) in diameter and one with steel straps for poles between 100-410 mm (4-16 in) in diameter. AXIS T91B47 is tightened with two marine-grade (SS316L) stainless steel straps with TX30 screw interface for ease and secure installation. When installing an Axis fixed dome or fixed bullet camera, there is no need for additional accessories like pendant kits; AXIS T91B47 fits the back side of the camera to ensure a cost efficient solution..Device Supported: Surveillance Camera, Radar Detector, Speaker, Camera Housing.Part Number: 01165-001.T91B47 Pole Mount
It is intended for poles between 100-410 mm (4-16 in) in diameter.Has an IK10 rating for impact resistance, which safeguards it against vandalism.Part Number: 5901-341
Indoor and outdoor use. Impact-resistant to prevent vandalism (IK10). Cable gasket to prevent insect infestation. Robust and safe. A smart mount for poles of any size: AXIS T91B57 Pole Mount is a versatile and robust, high-quality pole mount. While it can be used indoors, it's particularly appropriate for outdoor installations under harsher conditions. The high-quality pole mount is designed for use with selected AXIS T91 wall mounts and AXIS T98A cabinet series. It is easily adjustable to fit poles with a diameter between 100-410 mm (4-16 in). A pole mount that can take it: AXIS T91B57 Pole Mount has an IK10 rating for impact resistance, which safeguards it against vandalism. And it features a closed back and a cable gasket, which means it's also protected against insect infestation..Device Supported: Relay Module, Surveillance Cabinet.Maximum Load Capacity: 66.14 lb.Weight (Approximate): 3.09 lb
An indoor/ outdoor pendant kit for mounting a camera on 1.5" NPS threaded brackets. The kit allows AXIS P37 network cameras to be mounted on poles, parapets and outer corners using many AXIS T91 mounting accessories..Pendant kit for mounting a camera on 1.5" NPS threaded brackets.Dimensions: 1.96"H x 9.6"Dia..Enables mounting on walls, poles, and outer corners using many AXIS T91 mounting accessories.Compatible with AXIS P37 network cameras
You May Also Like
AXIS T94S01P Mounting Box for Network Camera.Compatibility: Axis Network Cameras.Device Supported: Network Camera.T94S01P Mounting Box
AXIS T91B53 Ceiling Mount for Surveillance Camera.Maximum Load Capacity: 3.53 lb.Weight (Approximate): 2.65 lb
The AXIS 5507-451 T91B50 white telescopic ceiling mount is suitable for AXIS M3004-V/M3005-V, AXIS M3024-LVE/M3025-VE/M3026-VE/M3027-PVE/M3037-PV PTZ domes network cameras. This ceiling mount is suitable for indoor and outdoor usage. It features powder coated aluminum construction for durability. This mount has +/- 45 deg pivot angle. Telescopic functionality makes adjustment of length easy..Telescopic ceiling mount for outdoors and indoors.Dimensions: 45" - 84"L.Compatibility: AXIS M50/S P55/P56/Q60/Q61 series, AXIS M3004-V/M3005-V, AXIS M3024-LVE/M3025-VE/M3026-VE/M3027-PVE/M3037-PV PTZ domes network cameras.Color: White, Material: Powder coated aluminum NEMA 4X-rated, IK10 impact-resistant casing.Maximum load: 22 lbs..Pivot angle: +/-45 deg.Cable routing: Cable conduit hole 3/4" side, cable conduit hole 3/4" back.Telescopic functionality allows the installer to adjust the length in an easy and secure way (up to 2 m/79").Mount is designed to swing and not break if hit by forklifts or tall vehicles.Can also be installed in sloped ceilings thanks to the ball joint, which ensures that the camera is still hanging straight.Robust and safe installation, support for Axis PTZ domes and fixed domes with 1 1/2" NPS thread.Includes: Installation guide.Meets IEC/EN/UL 60950-1, IEC/EN/UL 60950-22, EN 50581, IEC/EN 62262 IK10, NEMA 250 Type 4X certifications and standards.Weight: 9 lbs..Comes with 3 years warranty
The AXIS® 5506-481 T91E61 white wall mount is suitable for fixed dome network cameras. The wall mount is compatible with T94B01D, T94F01D, T94F02D and T94K01D pendant kits. This wall mount has aluminum construction for added durability. This wall mount can withstand load of 22Ibs and offers cable management for convenient use..Network camera wall mount is perfect for fixed dome pendant kits.Dimensions: 3.1"H x 6.3"W x 4.7"D.Compatible with AXIS T94B01D, AXIS T94F01D, AXIS T94F02D, AXIS T94K01D, AXIS T94M01D and AXIS T94T01D pendant kit.Comes in white color and features aluminum construction for added durability.Maximum load: 22 lbs..Cable routing: Internal, Back: Cable hole, Side: Cut outs.Suits both indoor and outdoor environments.Has powder coated and chromated aluminum construction for added protection.Includes installation guide.Meets REACH, CE, IEC/EN/UL 60950-1, IEC/EN/UL 60950-22, EN 50581, UL 50E and IEC 62262 IK10 and NEMA 250 Type 4X standards and certifications.Weight: 1.15 lbs..Comes with 3 years warranty
The AXIS 5506-951 T91G61 white wall mount bracket is suitable for Q3907-PVE network camera. It is suitable for both indoor and outdoor applications. This bracket safely protects against water ingress inside the mount. This bracket comes in a powder coated aluminum casing. Pre-mounted Ethernet cable with IP66 RJ45 connector helps to connect power and data to network cameras..Wall mount bracket suits all environments, both indoors and outdoors.Dimensions: 8.4"H x 7.3"W x 15.9"D.Compatibility: AXIS P5512-E PTZ, P5514-E PTZ, P5515-E, Q6000-E, Q6000-E, Q6045-E Mk II PTZ, Q6045-E PTZ, Q6128-E PTZ, Q6115-E dome network cameras.Color: White, Material: Powder coated aluminum casing.Maximum load: 30 kg (66 lbs.).Cable routing: Cable hole back, 0.75" conduit entrance x2 bottom.Designed to accommodate and safely protect against water ingress inside the mount, such as midspans and Media converters.Pre-mounted Ethernet cable with IP66 RJ45 connector (with gasket) helps quickly and easily connecting power and data to network cameras.Impact-resistant and outdoor proven material.AXIS T91G61 has the same hole pattern as the standard Axis PTZ wall mount and for retrofit.A pattern that matches Pelco's PTZ camera mount to enable an easy switch - no additional drilling is required.Includes: Installation guide, Ethernet cable with IP66 RJ45 connector (with gasket), foam gaskets and silicone strap (pre-mounted).Meets IEC/EN/UL 60950-1, IEC/EN/UL 60950-22, EN 50581, IEC/EN 60529 IP66, NEMA 250 Type 4X, IEC 60068-2-27 certifications and standards.Weight: 7.7 lbs..Comes with 3 years warranty
Outdoor pendant kit for AXIS M3057-PLVE and M3058-PLVE. Weathershield made from impact-, UV-, and heat-resistant polymer. Compatible with wide range of Axis mounts with 1.5" NPS threaded interface..Device Supported: Network Camera, Camera Mount.T94T02D Pendant Kit.Part Number: 01461-001.All Solid Capacitors, 10 years ultra-long lifetime (under full load),Lower temperature and higher efficiency, Extreme low ESR
The AXIS® T91B51 ceiling mount is suitable for environments with low ceilings. This vandal and corrosion-resistant mount offers swivel action and is suitable for indoor and outdoor applications. It lets you easily mount cameras extremely close to the ceiling. This ceiling mount is compatible with all AXIS® PTZ dome cameras and outdoor models of AXIS® fixed domes..Ceiling mount is perfect for indoor and outdoor use.Compatible with all Axis PTZ dome cameras and outdoor models of Axis fixed domes.Comes in white color.Features corrosion-resistant, robust construction, salt resistant, swivel adjustment, candal resistant
5504-821 Communication Inc Axis Wall Mount is a chromated and powder coated aluminum wall mount compatible with AXIS PTZ dome and fixed dome network cameras. It comes with a mounting plate, a pipe seal and conduit hole cover..Type: Wall Mount.Compatibility: AXIS Network Cameras: M3004-V, M3005-V, M3006-V, M3007-V, M3007-PV, M3024-LVE, M3025-VE, M3026-VE, M32 Series P3301, P3301,-V P3304, P3304-V, P33 Series M50 Series P55 Series Q60 Series.Weight: 6 lbs..Features: Cable Management.5504-821 Communication Inc Axis Wall Mount - Compatible with AXIS PTZ dome and fixed dome network cameras
The AXIS 5507-401 T94B01P white conduit mounting box is suitable for M3044-V, M3044-WV, M3045-V, M3045-WV, M3046-V, M3104-L, M3104-LVE, M3105-L network camera. It features 1/2" ACI interface to enable use of ACI adapters. This mounting box has an integrated female tripod thread for use of standard camera stands or holders..Conduit mounting box for network cameras.Compatibility: AXIS Companion Dome VCompanion Eye L, Companion Eye LVE, M3044-V, M3044-WV, M3045-V, M3045-WV, M3046-V, M3104-L network cameras.Color: White.Conduit for 1/2" and M20 pipes.Features 1/2" ACI interface to enable use of ACI adapters.There is an integrated female tripod thread for use of standard camera stands or holders
The AXIS T94R01B corner bracket in white, is made from aluminum with a powder-coated finish. It is compatible with the wall mount of AXIS camera housings. It is suitable for mounting the cameras to the outer corners of a building. It is resistant to corrosion and is sturdy and safe. It is also compliant to IK10 rating for protection against impact and vandal acts..Corner bracket is used to mount the cameras to the outer corners of a building.Dimensions: 7"H x 5"W x 4"D.Compatibility: Axis M1114-E, M1125-E, P1355-E, P1364-E, P1365-E Mk II, P3224-LVE, Q1765-LE, Q1931-E, Q1941-E, Q2901-E network cameras.Comes in white color with NEMA 4X- and IK10-rated impact-resistant powder-coated aluminum construction.Maximum load: 13 lbs..Cable routing: Conduit hole in back.Suitable for outdoor and indoor corners.Protects against impact and vandal acts and resists corrosion.Includes installation guide.Meets IEC/EN/UL 60950-1, IEC/EN/UL 60950-22, Class 4M3 IEC 60068-2-6 and IEC 60068-2-27, EN 50581, REACH, CE standards.Weight: 0.8 lbs..Comes with 3 year warranty
The AXIS® 5505-091 T94M01D outdoor pendant kit is perfect for use with Q3505-VE network camera. It is suitable for mounting the camera on 1 1/2" NPS or NPT threaded brackets..Pendant kit is suitable for mounting the camera on 1 1/2" NPS or NPT threaded brackets.Compatible with AXIS network camera Q3505-VE.Suitable for outdoor use.Suitable for mounting the camera on 1 1/2" NPS or NPT threaded brackets
The AXIS® 5900-181 standalone surveillance cabinet is vandal/water resistant and perfect for use with PTZ/fixed dome outdoor network camera. It features polycarbonate construction for durability and has stainless steel mounting plate for easy mounting. This robust cabinet offers easy installation for critical system equipment..Robust surveillance cabinet is suitable for easy installation of critical system equipment.Dimensions: 14.2"H x 11.1"W x 5.2"D.Compatible with PTZ/fixed dome network cameras.Color: White, Material: Polycarbonate cabinet and stainless steel mounting plate.Suitable for indoor as well as outdoor use.IP66 and NEMA 4X-rated, IK10 impact-resistant for safe use.Vandal resistant for safe use.Simple to install.Weatherproof for safe use.Standalone.Operating temperature: -40 - 75 deg C, Humidity: 10 - 100 percent RH (condensing).Contains installation guide, pre-mounted cable gaskets, pre-mounted DIN rail, cable clamps, cable straps, power cover and device mounting bracket.Meets IEC/EN/UL 60950-1, IEC/EN/UL 60950-22, UL 50, UL 50E, IEC 60529 IP66 and NEMA 250 Type 4X certifications and standards.Weight: 7.7 lbs..Comes with 3 years warranty
The Axis Communications® T91B21 wall mount in white, is compatible with M1065-L, M1103, M1104, M1113, M1114, M1124, M3007-P, M3007-PV, M3024-LVE, M3025-VE, P1347 and P1353 network cameras..Wall mount is suitable for network camera.Compatible with M1065-L, M1103, M1104, M1113, M1114, M1124, M3007-P, M3007-PV, M3024-LVE, M3025-VE, P1347, P1353 network cameras.Color: White, Material: Metal
The AXIS® 5505-081 T94K01D indoor pendant kit is perfect for use with P32-V/P33-V/Q3505-V series network camera. It is suitable for mounting the camera on 1 1/2" NPS or NPT threaded brackets..Pendant kit is suitable formounting the camera on 1 1/2" NPS or NPT threaded brackets.Compatible with AXIS network cameras AXIS P3214-V, P3215-V, P3224-LV, P3225-LV, P3346, P3346-V, P3354, P3364-LV, P3364-V, P3365-V and P3367-V.Suitable for indoor use.Suitable for mounting the camera on 1 1/2" NPS or NPT threaded brackets
Axis® T91B63 Ceiling mount is ideal for small or large poles up to 400 mm in diameter. Mount is compatible with P3301, P3301-V, P3304, P3304-V, P33, M50, P55 and Q60 series Axis® network cameras and PTZ dome cameras..Security accessories type: Ceiling mount.Mount type: Ceiling mount.Cable routing: Back: Cable holes, Side: Cable conduit holes M20 ( 3/4").Environment: Indoor/outdoor.Features: Cable management.Suitable for installation with conduit connections and cable channels.Maximum load capacity: 33 lbs..Compatibility: AXIS P55/Q60 series, AXIS M50 series, Axis fixed cameras, AXIS P33 series, AXIS M32 series, AXIS P3301/-V and AXIS P3304/-V, AXIS M3004-V/M3005-V, AXIS M3006-V/M3007-P/-PV/M3024-LVE/ M3025-VE/M3026-VE.Includes installation guide, AXIS T91A6 pipe seal, AXIS T94A01D pendant kit.Certification and Standards: IEC/EN/UL 60950-1, IEC/EN/UL 60950-22, IEC 62262 IK10, EN 50581.Weight: 4.4 lbs..Warranty: 3 years.Axis® T91B63 Ceiling mount is designed for supporting surveillance camera and is ideal for indoor or outdoor use.
The Axis Communications® 5017-051 T91A05 camera holder in white, is suitable for use with 1 1/2" NPS or NPT threaded pipes. It is compatible with M1065-L, M1103, M1104, M3025-VE, P1357, Q1604, P1364, Q1615, P1365 Mk II, P1405-LE, P1425-LE and Q1775 pendant mounted cameras..Camera holder for pendant mounted cameras.Compatible with M1065-L, M1103, M1104, M3025-VE, P1357, Q1604, P1364, Q1615, P1365 Mk II, P1405-LE, P1425-LE, Q1775 pendant mounted cameras.Color: White.Suitable for pendant-mounted cameras.For use with 1 1/2" NPS or NPT threaded pipes