Polyimide Adhesive Tapes

Double Sided Polyimide Tapes are made of 1 mil polyimide film with 1.5 mil of silicone adhesive coating on each side. They are available in widths of up to 20 inches. They packaged with a single PET Liner in 36 yards long roll with a 3 inch core. These tapes offer an excellent performance in electrical and thermal insulation and have high dielectric strength. These Double Sided Polyimide Tapes are used for splicing of insulating layers, temporarily masking circuit boards and coils. These tapes offer outstanding thermal endurance with excellent puncture and tear resistance..Applications: Aerospace assembly, Masking circuit boards and coils, wafer dicing die cutting, Optic cables and solar panels..3 inch wide x 36 yards long x 4 mil. thick.Made of 1 mil polyimide film with 1.5 mil of silicone adhesive coating on each side (4 mil total thickness).RoHS Compliant.Temperature Rating: 500 degrees fahrenheit.Designed to be used for temporary masking purposes

Double Sided Polyimide Tapes are made of 1 mil polyimide film with 1.5 mil of silicone adhesive coating on each side. They are available in widths of up to 20 inches. They packaged with a single PET Liner in 36 yards long roll with a 3 inch core. These tapes offer an excellent performance in electrical and thermal insulation and have high dielectric strength. These Double Sided Polyimide Tapes are used for splicing of insulating layers, temporarily masking circuit boards and coils. These tapes offer outstanding thermal endurance with excellent puncture and tear resistance..Applications: Aerospace assembly, Masking circuit boards and coils, wafer dicing die cutting, Optic cables and solar panels..1 inch wide x 36 yards long x 4 mil. thick.Made of 1 mil polyimide film with 1.5 mil of silicone adhesive coating on each side (4 mil total thickness).RoHS Compliant.Temperature Rating: 500 degrees fahrenheit.Designed to be used for temporary masking purposes

Double Sided Polyimide Tapes are made of 1 mil polyimide film with 1.5 mil of silicone adhesive coating on each side. They are available in widths of up to 20 inches. They packaged with a single PET Liner in 36 yards long roll with a 3 inch core. These tapes offer an excellent performance in electrical and thermal insulation and have high dielectric strength. These Double Sided Polyimide Tapes are used for splicing of insulating layers, temporarily masking circuit boards and coils. These tapes offer outstanding thermal endurance with excellent puncture and tear resistance..Applications: Aerospace assembly, Masking circuit boards and coils, wafer dicing die cutting, Optic cables and solar panels..3/4 inch wide x 36 yards long x 4 mil. thick.Made of 1 mil polyimide film with 1.5 mil of silicone adhesive coating on each side (4 mil total thickness).RoHS Compliant.Temperature Rating: 500 degrees fahrenheit.Designed to be used for temporary masking purposes

Double Sided Polyimide Tapes are made of 1 mil polyimide film with 1.5 mil of silicone adhesive coating on each side. They are available in widths of up to 20 inches. They packaged with a single PET Liner in 36 yards long roll with a 3 inch core. These tapes offer an excellent performance in electrical and thermal insulation and have high dielectric strength. These Double Sided Polyimide Tapes are used for splicing of insulating layers, temporarily masking circuit boards and coils. These tapes offer outstanding thermal endurance with excellent puncture and tear resistance..Applications: Aerospace assembly, Masking circuit boards and coils, wafer dicing die cutting, Optic cables and solar panels..2 inches wide x 36 yards long x 4 mil. thick.Made of 1 mil polyimide film with 1.5 mil of silicone adhesive coating on each side (4 mil total thickness).RoHS Compliant.Temperature Rating: 500 degrees fahrenheit.Designed to be used for temporary masking purposes

Kapton Tape measuring 3/4" x 36 yds. x 2 mil is made of polymide film with silicone adhesive and maintains high temperature resistance. Tape with excellent abrasion resistance has high dielectric strength and is sold as 1 per pack..Width: 3/4 in.Length: 36 yds.Thickness: 2 mil film, 3.5 mil total.Temperature: -269 - 260 deg C (-452 - 500 deg F).Material: Polymide film, silicone adhesive.Maintains high temperature resistance.Good electrical insulator.Excellent abrasion resistance and high dialectic strength.Silicon adhesive protection leaves no residue.DuPont Kapton polyimide films have high performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties that withstand extreme temperature, vibration and other demanding environments.Polyimide films make innovative design solutions possible in a range of industries including, consumer electronics, solar photovoltaic and wind energy, aerospace, automotive and industrial applications.Applications: Automotive sensor and manifolds, etching, fiber optics cable, high temperature powder coating, semiconductor manufacturing, wave soldering during circuit board assembly.Standards and compliance: RoHS.2 mil, 3/4" x 36 yds. kapton tapes are used in applications at temperatures as low as 269 deg C ( 452 deg F) and as high as 260 deg C (500 deg F).

Kapton Tape measuring 1/4" x 36 yds. x 1 mil is made of polymide film with silicone adhesive and maintains high temperature resistance. Tape with excellent abrasion resistance has high dielectric strength and is sold as 1 per pack..Width: 1/4 in.Length: 36 yds.Thickness: 1 mil film, 2.5 mil total.Temperature: -269 - 260 deg C (-452 - 500 deg F).Material: Polymide film, silicone adhesive.Maintains high temperature resistance.Good electrical insulator.Excellent abrasion resistance and high dialectic strength.Silicon adhesive protection leaves no residue.DuPont Kapton polyimide films have high performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties that withstand extreme temperature, vibration and other demanding environments.Polyimide films make innovative design solutions possible in a range of industries including, consumer electronics, solar photovoltaic and wind energy, aerospace, automotive and industrial applications.Applications: Automotive sensor and manifolds, insulating circuit boards, etching, fiber optics cable, high temperature powder coating, semiconductor manufacturing, wave soldering during circuit board assembly.Standards and compliance: RoHS.1 mil, 1/4" x 36 yds. kapton tapes are used in applications at temperatures as low as 269 deg C ( 452 deg F) and as high as 260 deg C (500 deg F).

Kapton Tape measuring 1/2" x 36 yds. x 1 mil is made of polymide film with silicone adhesive and maintains high temperature resistance. Tape with excellent abrasion resistance has high dielectric strength and is sold as 1 per pack..Width: 1/2 in.Length: 36 yds.Thickness: 1 mil film, 2.5 mil total.Temperature: -269 - 260 deg C (-452 - 500 deg F).Material: Polymide film, silicone adhesive.Maintains high temperature resistance.Good electrical insulator.Excellent abrasion resistance and high dialectic strength.Silicon adhesive protection leaves no residue.DuPont Kapton polyimide films have high performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties that withstand extreme temperature, vibration and other demanding environments.Polyimide films make innovative design solutions possible in a range of industries including, consumer electronics, solar photovoltaic and wind energy, aerospace, automotive and industrial applications.Applications: Automotive sensor and manifolds, insulating circuit boards, etching, fiber optics cable, high temperature powder coating, semiconductor manufacturing, wave soldering during circuit board assembly.Standards and compliance: RoHS.1 mil, 1/2" x 36 yds. kapton tapes are used in applications at temperatures as low as 269 deg C ( 452 deg F) and as high as 260 deg C (500 deg F).

Bertech Kapton tapes are made from Kapton HN film with silicone adhesive. They have been used in applications at temperatures as low as -269 degrees C (-452 degrees F) and as high as 260 degrees C (500 degrees F). 2 mil film thickness with 1.5 mil silicone adhesive. DuPont Kapton polyimide films have set the industry standard for over 45 years in high performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties that withstand extreme temperatures, vibration, and other demanding environments. Kapton tapes have high dielectric strength. The silicon adhesive protection leaves no residue..1" x 36 yds. long heat resistant tape.Film thickness: 0.05mm, adhesive thickness: 0.04mm, total thickness: 0.09mm.These tapes are designed for masking of electronic and other components during the assembly and manufacturing process.Comes in amber color.Silicone adhesive, which does not leave any residue.Tensile strength is 50 lbs./inch.Meets or exceeds RoHS standard.They are reliable and durable, with a unique combination of electrical, thermal, chemical, and mechanical properties that withstand extreme temperatures, vibration, and other volatile environments.Polyimide films make innovative design solutions possible in a range of industries, including consumer electronics, solar photovoltaic, wind energy, aerospace, automotive, and industrial applications.They have been used in applications at temperatures as low as -269 degrees C (-452 degrees F) and as high as 260 degrees C (500 degrees F)

Kapton Tape measuring 1/8" x 36 yds. x 1 mil is made of polymide film with silicone adhesive and maintains high temperature resistance. Tape with excellent abrasion resistance has high dielectric strength and is sold as 1 per pack..Width: 1/8 in.Length: 36 yds.Thickness: 1 mil film, 2.5 mil total.Temperature: -269 - 260 deg C (-452 - 500 deg F).Material: Polymide film, silicone adhesive.Maintains high temperature resistance.Good electrical insulator.Excellent abrasion resistance and high dialectic strength.Silicon adhesive protection leaves no residue.DuPont Kapton polyimide films have high performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties that withstand extreme temperature, vibration and other demanding environments.Polyimide films make innovative design solutions possible in a range of industries including, consumer electronics, solar photovoltaic and wind energy, aerospace, automotive and industrial applications.Applications: Automotive sensor and manifolds, insulating circuit boards, etching, fiber optics cable, high temperature powder coating, semiconductor manufacturing, wave soldering during circuit board assembly.Standards and compliance: RoHS.1 mil, 1/8" x 36 yds. kapton tapes are used in applications at temperatures as low as 269 deg C ( 452 deg F) and as high as 260 deg C (500 deg F).

Bertech Kapton tapes are made from Kapton HN film with silicone adhesive. They have been used in applications at temperatures as low as -269 degrees C (-452 degrees F) and as high as 260 degrees C (500 degrees F). 2 mil film thickness with 1.5 mil silicone adhesive. DuPont Kapton polyimide films have set the industry standard for over 45 years in high performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties that withstand extreme temperatures, vibration, and other demanding environments. Kapton tapes have a high dielectric strength. The silicon adhesive protection leaves no residue..3" x 36 yds. long heat resistant tape.Film thickness: 0.05mm, adhesive thickness: 0.04mm, total thickness: 0.09mm.These tapes are designed for masking of electronic and other components during the assembly and manufacturing process.Comes in amber color.Silicone adhesive, which does not leave any residue.Tensile strength is 50 lbs./inch.Meets or exceeds RoHS standard.They are reliable and durable, with a unique combination of electrical, thermal, chemical, and mechanical properties that withstand extreme temperatures, vibration, and other volatile environments.Polyimide films make innovative design solutions possible in a range of industries, including consumer electronics, solar photovoltaic, wind energy, aerospace, automotive, and industrial applications.They have been used in applications at temperatures as low as -269 degrees C (-452 degrees F) and as high as 260 degrees C (500 degrees F)

Bertech Kapton tapes are made from Kapton HN film with silicone adhesive. They have been used in applications at temperatures as low as -269 degrees C (-452 degrees F) and as high as 260 degrees C (500 degrees F). 2 mil film thickness with 1.5 mil silicone adhesive. DuPont Kapton polyimide films have set the industry standard for over 45 years in high performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties that withstand extreme temperatures, vibration, and other demanding environments. Kapton tapes have a high dielectric strength. The silicon adhesive protection leaves no residue..2" x 36 yds. long heat resistant tape.Film thickness: 0.05mm, adhesive thickness: 0.04mm, total thickness: 0.09mm.These tapes are designed for masking of electronic and other components during the assembly and manufacturing process.Comes in amber color.Silicone adhesive, which does not leave any residue.Tensile strength is 50 lbs./inch.Meets or exceeds RoHS standard.They are reliable and durable, with a unique combination of electrical, thermal, chemical, and mechanical properties that withstand extreme temperatures, vibration, and other volatile environments.Polyimide films make innovative design solutions possible in a range of industries, including consumer electronics, solar photovoltaic, wind energy, aerospace, automotive, and industrial applications.They have been used in applications at temperatures as low as -269 degrees C (-452 degrees F) and as high as 260 degrees C (500 degrees F)

Kapton Tape measuring 1" x 36 yds. x 2 mil is made of polymide film with silicone adhesive and maintains high temperature resistance. Tape with excellent abrasion resistance has high dielectric strength and is sold as 1 per pack..Width: 1 in.Length: 36 yds.Thickness: 2 mil film, 3.5 mil total.Temperature: -269 - 260 deg C (-452 - 500 deg F).Material: Polymide film, silicone adhesive.Maintains high temperature resistance.Good electrical insulator.Excellent abrasion resistance and high dialectic strength.Silicon adhesive protection leaves no residue.DuPont Kapton polyimide films have high performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties that withstand extreme temperature, vibration and other demanding environments.Polyimide films make innovative design solutions possible in a range of industries including, consumer electronics, solar photovoltaic and wind energy, aerospace, automotive and industrial applications.Applications: Automotive sensor and manifolds, etching, fiber optics cable, high temperature powder coating, semiconductor manufacturing, wave soldering during circuit board assembly.Standards and compliance: RoHS.2 mil, 1" x 36 yds. kapton tapes are used in applications at temperatures as low as 269 deg C ( 452 deg F) and as high as 260 deg C (500 deg F).

Kapton® Tapes are made from 1 Mil thick Dupont's Kapton® HN film with silicone adhesive that leaves no residue. These Kapton Tapes are designed for temporary masking of electronic and other components during assembly and manufacturing process. They are extremely versatile and their thermal performance provides unlimited potential from electronic circuits in the camera to the space missions to the next generation of photovoltaic and solar cells. They have been used in applications at temperatures as low as -269°C (-452°F) and as high as 260°C (500°F). They are available in widths of up to 19 inches. They are packaged in 36 yard-long rolls on a 3 inch core. DuPont™ and Kapton® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company..Applications: 3D printing, Aerospace assembly, Auto industry, Electronic assembly, Solar panels, Solder wave process.Amber, Dupont HN series.Silicon adhesive which enables masking of uneven surfaces and removes cleanly without adhesive residue.Temperature Range: -452 to 500 degrees F.RoHS Compliant

Kapton® Tapes are made from 1 Mil thick Dupont's Kapton® HN film with silicone adhesive that leaves no residue. These Kapton Tapes are designed for temporary masking of electronic and other components during assembly and manufacturing process. They are extremely versatile and their thermal performance provides unlimited potential from electronic circuits in the camera to the space missions to the next generation of photovoltaic and solar cells. They have been used in applications at temperatures as low as -269°C (-452°F) and as high as 260°C (500°F). They are available in widths of up to 19 inches. They are packaged in 36 yard-long rolls on a 3 inch core. DuPont™ and Kapton® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company..Applications: 3D printing, Aerospace assembly, Auto industry, Electronic assembly, Solar panels, Solder wave process.Amber, Dupont HN series.Silicon adhesive which enables masking of uneven surfaces and removes cleanly without adhesive residue.Temperature Range: -452 to 500 degrees F.RoHS Compliant

Kapton® Tapes are made from 1 Mil thick Dupont's Kapton® HN film with silicone adhesive that leaves no residue. These Kapton Tapes are designed for temporary masking of electronic and other components during assembly and manufacturing process. They are extremely versatile and their thermal performance provides unlimited potential from electronic circuits in the camera to the space missions to the next generation of photovoltaic and solar cells. They have been used in applications at temperatures as low as -269°C (-452°F) and as high as 260°C (500°F). They are available in widths of up to 19 inches. They are packaged in 36 yard-long rolls on a 3 inch core. DuPont™ and Kapton® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company..Applications: 3D printing, Aerospace assembly, Auto industry, Electronic assembly, Solar panels, Solder wave process.Amber, Dupont HN series.Silicon adhesive which enables masking of uneven surfaces and removes cleanly without adhesive residue.Temperature Range: -452 to 500 degrees F.RoHS Compliant

Kapton® Tapes are made from 1 Mil thick Dupont's Kapton® HN film with silicone adhesive that leaves no residue. These Kapton Tapes are designed for temporary masking of electronic and other components during assembly and manufacturing process. They are extremely versatile and their thermal performance provides unlimited potential from electronic circuits in the camera to the space missions to the next generation of photovoltaic and solar cells. They have been used in applications at temperatures as low as -269°C (-452°F) and as high as 260°C (500°F). They are available in widths of up to 19 inches. They are packaged in 36 yard-long rolls on a 3 inch core. DuPont™ and Kapton® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company..Applications: 3D printing, Aerospace assembly, Auto industry, Electronic assembly, Solar panels, Solder wave process.Amber, Dupont HN series.Silicon adhesive which enables masking of uneven surfaces and removes cleanly without adhesive residue.Temperature Range: -452 to 500 degrees F.RoHS Compliant