Secure Phone Pouches
5 results
The TechProtectus Faraday Cellphone Pouch is the ultimate solution for keeping students engaged in the classroom by effectively preventing cellphone distractions. Designed specifically for K12 schools, this pouch blocks Wi-Fi, Bluetooth, GPS, RFID, cellular, NFC, AirTag, and car key signals, ensuring a distraction-free learning environment. Built with durable, water-resistant material, the pouch not only shields devices from spills but also provides drop protection, helping to keep student cellphones safe from accidental damage. The ID window, Velcro closure, and convenient hanging features make it an essential tool for organized and efficient classroom management..Loud Velcro Closure for Teacher Awareness – Alerts teachers immediately if a student attempts to access their phone..Difficult for Students to Remove Phones Unnoticed – Designed to prevent students from easily taking out their phones during class, making it easier for teachers to notice unauthorized use..ID Window for Easy Identification – Allows for quick and easy identification of each pouch, reducing confusion..Emergency Access Design – Ensures that students can retrieve their phones quickly in case of emergencies..Durable & Long-Lasting – Made with double-layered metal fiber material for reliable performance in busy school environments..Water-Resistant & Drop Protection – Shields cellphones from spills, moisture, and accidental drops, extending device longevity..Convenient Hanging Features – Equipped with a metal ring and side loop for easy storage and organization..Classroom-Focused Solution – Designed for schools to help maintain a structured and focused learning atmosphere..High Visibility Dual-Color Design – The yellow Velcro closure and black body ensure that any unauthorized phone access is easily noticed by teachers..Effectively shields cellphones from all wireless signals, preventing distractions from calls, texts, and notifications perfect for Schools and Classrooms.
Once shut, the pouch locks instantly and stays closed until a teacher unlocks it using the base key — which comes in both portable and wall-mounted options. With a single press, the lock releases quickly and easily, giving educators controlled access whenever needed. The Faraday lining blocks all wireless signals — calls, texts, Wi-Fi, and Bluetooth — while the rugged outer construction is built to withstand daily use in schools..Mechanical Locking – Automatic Secure Closure: Insert the pouch connector and the mechanical locking system instantly clicks shut. Students cannot open it by pulling, prying, or forcing..Maximum Security – Tamper-Resistant Design: Precision mechanical locking cannot be bypassed with magnetic tools. This is the most secure option available to enforce a strict bell-to-bell phone ban policy..Unlocking – Simple & Fast for Teachers: With the advanced key-and-base system (portable or wall-mounted), teachers unlock with just one press of the release button — quick, effortless, and fully controlled..100% Signal Blocking with Faraday Lining: The inner Faraday shielding layer cuts off all signals — Wi-Fi, Bluetooth, GPS, RFID, and cellular — ensuring phones stay completely silent and disconnected..Flexible Unlocking Options: Schools can choose between portable or wall-mounted base key units, giving administrators freedom to adapt to different classroom setups and policies..Loud Velcro Closure for Teacher Awareness – Alerts teachers immediately if a student attempts to access their phone..ID Window for Easy Identification – Allows for quick and easy identification of each pouch, reducing confusion..The TechProtectus Lockable Signal-Blocking Pouch combines a precision mechanical locking system with an inner Faraday shielding layer to keep student phones fully secure during class
The Squids® Water Resistant Phone Pouch and Trap makes it easy to carry and use your cell phone on the job while preventing dropped objects when working at-heights.This cell phone pouch is made of a clear touchscreen material that provides protection while still allowing touchscreen use and access to both the front and rear cameras of smartphones. The heavy-duty, easy-to-use zipper closure system safely secures the device inside the cell phone holder.There is a steel grommet/ring on the bottom to attach a tool lanyard for a complete tethering system. The sides of the smartphone pouch are made of heavy-duty, water-resistant reinforced tarpaulin, making it perfect for the harshest work environments.The smartphone sleeve is also great for the beach, boating, fishing, water-theme parks, camping, hiking or any other outdoor activity. Protect your phone from rain, snow, dirt, dust and sand..Approved to the ANSI/ISEA 121-2018 standard.Water resistant main material protects cell phone from rain, snow, dirt, dust and sand.Clear touchscreen material allows for full screen and camera functions.Heavy-duty zipper securely holds cell phones inside the pouch.Steel grommet/ring can be used to easily connect a tool lanyard.Tarpaulin reinforced side material for durability.Available in standard and plus sizes (see size chart to find the right fit for your cell phone).Designed to fit your cell phone without having to remove other aftermarket cell phone cases.Third party certified to a 1lb. (0.5kg.) maximum capacity.Patent pending
The Squids® Water Resistant Phone Pouch and Trap makes it easy to carry and use your cell phone on the job while preventing dropped objects when working at-heights.This cell phone pouch is made of a clear touchscreen material that provides protection while still allowing touchscreen use and access to both the front and rear cameras of smartphones. The heavy-duty, easy-to-use zipper closure system safely secures the device inside the cell phone holder.There is a steel grommet/ring on the bottom to attach a tool lanyard for a complete tethering system. The sides of the smartphone pouch are made of heavy-duty, water-resistant reinforced tarpaulin, making it perfect for the harshest work environments.The smartphone sleeve is also great for the beach, boating, fishing, water-theme parks, camping, hiking or any other outdoor activity. Protect your phone from rain, snow, dirt, dust and sand..Approved to the ANSI/ISEA 121-2018 standard.Water resistant main material protects cell phone from rain, snow, dirt, dust and sand.Clear touchscreen material allows for full screen and camera functions.Heavy-duty zipper securely holds cell phones inside the pouch.Steel grommet/ring can be used to easily connect a tool lanyard.Tarpaulin reinforced side material for durability.Available in standard and plus sizes (see size chart to find the right fit for your cell phone).Designed to fit your cell phone without having to remove other aftermarket cell phone cases.Third party certified to a 1lb. (0.5kg.) maximum capacity.Patent pending
Continue using your device's touchscreen through the transparent face of this waterproof pouch. Hook-and-loop strips help ensure a secure closure, and a foam insert makes the pouch float if dropped in water. This pouch is submersible up to 65 feet for 30 minutes, offering added protection and giving you time to retrieve a device that falls. The removable strap lets you grab and carry this Travelon waterproof pouch easily..Set of six waterproof pouches for keeping smartphone or digital camera dry.Comes in assorted colors (two blue, one purple, one orange, one yellow, and one green); made of PVC.Dimensions: 4.25"W x 6.25"L.Submersible to 65' for 30 minutes.Foam insert allows pouch to float on water's surface.Features a removable carry strap.Product is IPXA certified.Fits all sizes of smartphones.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.Protect your phone or camera from moisture on company outings with this Travelon waterproof pouch.
You May Also Like
Squeeze in a little more with this set of compression bags from Samsonite. The set includes 12 pieces in various sizes that help compact your clothing so you can pack up to twice as much..Squeeze in a little more with this set of 12 compression bags.Set includes: two pouch-size bags (11.5" x 13.5"), four carry-on size bags (13.5" x 19.5"), four suitcase-size bags (18" x 22.5"), two large dual-size bags (23.5" x 31.5").Made of clear plastic.12 bags per set.Airtight, reusable, and waterproof.Zipper sliders help keep your items secure.Bulky items stay compressed.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
The Squids® Can / Bottle Holder & Trap makes it easy to carry and secure your water bottle, spray bottle, aerosol can or other canisters of similar sizes to prevent dropped objects while working at-heights.There is a zinc plated D-ring on the backside that can be used to attach a tool lanyard to complete your tethering system. To keep your hands free, there’s a stainless-steel belt clip on the side to easily attach to a tool belt or fall protection harnesses.The can and bottle holder is made of abrasion-resistant neoprene that stretches to fit 16.9oz. (0.5L) containers including most standard plastic water bottles or even a can of WD40. The adjustable webbing strap can accommodate a variety of bottles and cans, and features a buckle closure system to safely secure them into the holder.Constructed with heavy-gauge nylon stitching for extra reinforcement, the bottle holster is made to take on use and abuse. The open top design makes drinking water a breeze in any situation, whether at-heights or on the ground.Use it as a can or bottle koozie while you’re out on the boat, a spray can holder when you’re in the garage or water bottle sleeve while training for your next race. Whatever it is, we’ve got you covered..Approved to the ANSI/ISEA 121-2018 standard.Neoprene primary material is abrasion-resistant and stretches to fit a variety of bottles/cans.Heavy gauge nylon stitching for extra reinforcement.Convenient stainless steel belt clip attaches to tool belts and fall protection harnesses.Zinc-plated D-ring for tool lanyard attachment.Adjustable buckle closure to securely hold the bottle/can in the holder.Fits standard 16.9oz. (0.5L) water bottles, spray paint cans, WD40 canisters and more.Third party certified to a 2lb (0.9kg) maximum capacity
Squids® Slips™ are perfect retrofit tool attachments for small hand tools to help reduce the risk of dropped objects and increase workplace safety. Connection points for tool lanyards can be tricky to find, especially on smaller hand tools like screw drivers and hex keys (Allen wrenches). While working at-heights, it is important to tether tools as part of your overall fall protection plan, but the lack of these connection points can make that difficult.STRAIGHTFORWARD INSTALLATIONNo additional install tools or complicated wrapping or shrinking! The patented Slips™ design requires a simple installation that follows its name. Simply “slip” the tool attachment on to the tool and connect a Squids® Tool Lanyard to complete your tethering system. Unlike competitors that offer a fitted cap that can cover up information (like on the end of a screwdriver, for example) these solutions leave the end open. The single piece design is easier to install compared to competitors that require two to three pieces to be assembled onto the tool.Simply puncture the interior membrane of the Tool Slip and slide the attachment to the desired location. The star points of the attachment’s interior will hold its location and the swiveling exterior ring will provide a connection point for tool lanyards. PERFECT FOR SMALL HAND TOOLSSmall hand tools have always been challenging to connect tool lanyards to. Screw drivers, small combination wrenches, punches, hex (Allen) wrenches and the like do not have captive connection points, and the low-profile designs can make it difficult for tapes, shrinks and tails to be applied. The Squids® Hand Tool Slips™ allow you to tether tools up to 1lb based on their diameter. Four sizes of Slips™ are compatible on tools with diameters ranging from 0.05” (1.3mm) to ½” (12.5mm). Check out the size chart for specific ranges per size..Approved to the ANSI/ISEA 121-2018 standard.Patent-pending one-piece design easily slides onto small hand tools without requiring additional tools to install or complicated wrapping or shrinking to apply.Swiveling exterior ring spins 360-degrees allowing screwdrivers and other rotating tools to be used without issue.ABS outer ring provides strength and durability in all environments, testing in hot, cold and wet conditions.Flexible inner core grips tool after application securing it as an attachment pointfor a tool lanyard preventing dropped objects.Available in four sizes compatible with tools ranging from 0.05” (1.3mm) to ½” (12.5mm).Maximum tethering capacity up to 1lb (0.45kg) dependent on size (review size chart for capacity information).Intended for singled use, discard after after removal and replace
Squids® Slips™ are perfect retrofit tool attachments for small hand tools to help reduce the risk of dropped objects and increase workplace safety. Connection points for tool lanyards can be tricky to find, especially on smaller hand tools like screw drivers and hex keys (Allen wrenches). While working at-heights, it is important to tether tools as part of your overall fall protection plan, but the lack of these connection points can make that difficult.STRAIGHTFORWARD INSTALLATIONNo additional install tools or complicated wrapping or shrinking! The patented Slips™ design requires a simple installation that follows its name. Simply “slip” the tool attachment on to the tool and connect a Squids® Tool Lanyard to complete your tethering system. Unlike competitors that offer a fitted cap that can cover up information (like on the end of a screwdriver, for example) these solutions leave the end open. The single piece design is easier to install compared to competitors that require two to three pieces to be assembled onto the tool.Simply puncture the interior membrane of the Tool Slip and slide the attachment to the desired location. The star points of the attachment’s interior will hold its location and the swiveling exterior ring will provide a connection point for tool lanyards. PERFECT FOR SMALL HAND TOOLSSmall hand tools have always been challenging to connect tool lanyards to. Screw drivers, small combination wrenches, punches, hex (Allen) wrenches and the like do not have captive connection points, and the low-profile designs can make it difficult for tapes, shrinks and tails to be applied. The Squids® Hand Tool Slips™ allow you to tether tools up to 1lb based on their diameter. Four sizes of Slips™ are compatible on tools with diameters ranging from 0.05” (1.3mm) to ½” (12.5mm). Check out the size chart for specific ranges per size..Approved to the ANSI/ISEA 121-2018 standard.Patent-pending one-piece design easily slides onto small hand tools without requiring additional tools to install or complicated wrapping or shrinking to apply.Swiveling exterior ring spins 360-degrees allowing screwdrivers and other rotating tools to be used without issue.ABS outer ring provides strength and durability in all environments, testing in hot, cold and wet conditions.Flexible inner core grips tool after application securing it as an attachment pointfor a tool lanyard preventing dropped objects.Available in four sizes compatible with tools ranging from 0.05” (1.3mm) to ½” (12.5mm).Maximum tethering capacity up to 1lb (0.45kg) dependent on size (review size chart for capacity information).Intended for singled use, discard after after removal and replace
Squids® Slips™ are perfect retrofit tool attachments for small hand tools to help reduce the risk of dropped objects and increase workplace safety. Connection points for tool lanyards can be tricky to find, especially on smaller hand tools like screw drivers and hex keys (Allen wrenches). While working at-heights, it is important to tether tools as part of your overall fall protection plan, but the lack of these connection points can make that difficult.STRAIGHTFORWARD INSTALLATIONNo additional install tools or complicated wrapping or shrinking! The patented Slips™ design requires a simple installation that follows its name. Simply “slip” the tool attachment on to the tool and connect a Squids® Tool Lanyard to complete your tethering system. Unlike competitors that offer a fitted cap that can cover up information (like on the end of a screwdriver, for example) these solutions leave the end open. The single piece design is easier to install compared to competitors that require two to three pieces to be assembled onto the tool.Simply puncture the interior membrane of the Tool Slip and slide the attachment to the desired location. The star points of the attachment’s interior will hold its location and the swiveling exterior ring will provide a connection point for tool lanyards. PERFECT FOR SMALL HAND TOOLSSmall hand tools have always been challenging to connect tool lanyards to. Screw drivers, small combination wrenches, punches, hex (Allen) wrenches and the like do not have captive connection points, and the low-profile designs can make it difficult for tapes, shrinks and tails to be applied. The Squids® Hand Tool Slips™ allow you to tether tools up to 1lb based on their diameter. Four sizes of Slips™ are compatible on tools with diameters ranging from 0.05” (1.3mm) to ½” (12.5mm). Check out the size chart for specific ranges per size..Approved to the ANSI/ISEA 121-2018 standard.Patent-pending one-piece design easily slides onto small hand tools without requiring additional tools to install or complicated wrapping or shrinking to apply.Swiveling exterior ring spins 360-degrees allowing screwdrivers and other rotating tools to be used without issue.ABS outer ring provides strength and durability in all environments, testing in hot, cold and wet conditions.Flexible inner core grips tool after application securing it as an attachment pointfor a tool lanyard preventing dropped objects.Available in four sizes compatible with tools ranging from 0.05” (1.3mm) to ½” (12.5mm).Maximum tethering capacity up to 1lb (0.45kg) dependent on size (review size chart for capacity information).Intended for singled use, discard after after removal and replace
3110F(X) Shock absorbing tool lanyard with carabiner on both ends: Designed and tested to prevent falling objects and reduce the force your body sees if a drop occurs by absorbing the energy transmitted through the tool lanyard. By reducing the shock load this design prevents the tool from pulling the user down with it protecting those above as well as those below. (19822).Shock absorbing properties reduce the dynamic force on the body or other anchor point if drop occurs.Durable 1680 denier polyester elastic blended webbing extends from 38" to 70" (96cm - 178cm).Low profile lightweight design reduces snag hazards and added weight.Anodized aluminum alloy carabiners with double action locking gate and inherent captive eye.High strength 3-ply nylon stitching secures connecting ends.Single length construction eliminates weak points seen with multi-component lanyards.Third party certified to a 15lbs (6.8kg) maximum capacity with 2:1 safety factor.Patent pending design
Outdoor activities are often rough on our mobile devices. Having an Absorbits Wet Phone moisture remover pouch on hand can save you time and money when dealing with a wet phone. This rescue pouch is equipped with patented Bone-Dri technology that removes moisture from your mobile device in a matter of hours. The moisture-absorber phone drying bag can be used multiple times, making it a must-have mobile accessory. Simply dry with a hairdryer or clothes dryer on the lowest setting. From iPhones to Androids and all things in between, this phone drying bag will fit most cellular devices..This moisture-absorber phone drying pouch can be used multiple times, making it a must-have mobile accessory.Made of 100% polyester; comes in black.Bone-Dri technology removes moisture from your mobile device in a matter of hours.Evenly distributed moisture-extraction materials wick dampness from all sides of your device.Features added padding for protection.After use, simply dry with a hairdryer or clothes dryer on the lowest setting.Size: 7.2"H x 5"W.Fits most cellular devices.⚠ WARNING: Contains Silica Do not Eat. For more info, go to https://www.p65warnings.ca.gov
Laptop/Chromebook/Notebook Work-in Carrying case, with Pouch and Shoulder Bag, designed for Students, Classrooms and Business-Black. Ultra-Thin Rugged Design-The EVA structure of the case protects from the shock associated with accidental falls off desks or drops during your commute to the classroom or work. Work-in Function-Unique clip design, can be opened at any time and quickly enter work, protects your laptop touchscreen very well..Features a clear exterior ID Slot and an accessory pouch for storing items.Can be easily carried with the padded carry handles or the removable shoulder strap.Shock resistant with EVA protective padding.Laptop is secured by two clips at the top of the clamshell and two elastic bands at the bottom.Fits 11-12" laptops/Chromebooks.Techprotectus Laptop work in carrying case design allows you to use your computer without having to remove it from the case.
Squids® Slips™ are perfect retrofit tool attachments for small hand tools to help reduce the risk of dropped objects and increase workplace safety. Connection points for tool lanyards can be tricky to find, especially on smaller hand tools like screw drivers and hex keys (Allen wrenches). While working at-heights, it is important to tether tools as part of your overall fall protection plan, but the lack of these connection points can make that difficult.STRAIGHTFORWARD INSTALLATIONNo additional install tools or complicated wrapping or shrinking! The patented Slips™ design requires a simple installation that follows its name. Simply “slip” the tool attachment on to the tool and connect a Squids® Tool Lanyard to complete your tethering system. Unlike competitors that offer a fitted cap that can cover up information (like on the end of a screwdriver, for example) these solutions leave the end open. The single piece design is easier to install compared to competitors that require two to three pieces to be assembled onto the tool.Simply puncture the interior membrane of the Tool Slip and slide the attachment to the desired location. The star points of the attachment’s interior will hold its location and the swiveling exterior ring will provide a connection point for tool lanyards. PERFECT FOR SMALL HAND TOOLSSmall hand tools have always been challenging to connect tool lanyards to. Screw drivers, small combination wrenches, punches, hex (Allen) wrenches and the like do not have captive connection points, and the low-profile designs can make it difficult for tapes, shrinks and tails to be applied. The Squids® Hand Tool Slips™ allow you to tether tools up to 1lb based on their diameter. Four sizes of Slips™ are compatible on tools with diameters ranging from 0.05” (1.3mm) to ½” (12.5mm). Check out the size chart for specific ranges per size..Approved to the ANSI/ISEA 121-2018 standard.Patent-pending one-piece design easily slides onto small hand tools without requiring additional tools to install or complicated wrapping or shrinking to apply.Swiveling exterior ring spins 360-degrees allowing screwdrivers and other rotating tools to be used without issue.ABS outer ring provides strength and durability in all environments, testing in hot, cold and wet conditions.Flexible inner core grips tool after application securing it as an attachment pointfor a tool lanyard preventing dropped objects.Available in four sizes compatible with tools ranging from 0.05” (1.3mm) to ½” (12.5mm).Maximum tethering capacity up to 1lb (0.45kg) dependent on size (review size chart for capacity information).Intended for singled use, discard after after removal and replace
The TechProtectus Portable Base Key is a compact, teacher-friendly unlocking tool designed for maximum flexibility in enforcing Bell-to-Bell cellphone policies. Built with durable ABS housing and a precision-engineered release mechanism, the Portable Base Key allows educators to unlock student pouches quickly with a single press. Its lightweight, handheld design makes it easy to carry from class to class, ensuring teachers remain in full control of phone access throughout the school day..Compact & Lightweight Design – Easy for teachers to carry between classrooms or keep on a lanyard or desk..One-Press Unlocking – Releases the pouch instantly with a single push, streamlining transitions at the start and end of class..Durable Construction – Reinforced materials withstand daily school use without jamming or breaking..Portability for Any Setup – Ideal for teachers who move between classrooms or for schools without fixed installations..Secure Teacher Control – Only authorized staff with the base key can unlock student pouches..TechProtectus Lockable Signal-Blocking Pouch
Techprotectus Protective Folio case can withstand everyday scratches, dents and shocks from drops..Reinforced bumper corners with magnetic foldable cover..The Folio cover folds into a stand with two positions for comfortable typing or viewing.The cover will automatically trigger the iPad's sleep and wake modes when closed or open.Designed especially for the iPad Mini 8.3" 6th generation
The Squids® 3796 Power Tool Bracket for Drill & Impact Drivers creates a unique tool attachment point to tether cordless drills, impact drivers and other power tools with a tool lanyard. Connection points for tool lanyards are not always readily available on power tools, which can create hazardous environments while working at-heights. Tethering your tools should be a part of an overall fall protection plan to reduce the risk of dropped objects and increase workplace safety. The stainless-steel tool bracket comes complete with a set of six metric fasteners (M2.5, M3, M4) to mount to a variety of power tools from brands including Bosch, Milwaukee, Makita, DeWalt and many others.STRAIGHTFORWARD INSTALLATION The one-time assembly creates a quick and easy one-step attachment to tether a lanyard to your power tools. Simply fasten the included tool bracket and labels onto screw ports intended for accessory belt hooks. Once the appropriate torque is applied to the anchor point, connect a tool lanyard to the bracket tether point to safely and securely tether tools. PERFECT FOR TOOLS WITH SCREW PORTSThe Power Tool Bracket for Drills and Impact Drivers is the perfect solution for smaller 12v. cordless power tools that cannot be wrapped by Squids® 3180 Power Tool Wraps. The patent-pending design will retrofit tools up to 3lbs. (1.36kg.) depending the fastener size used. Though intended for cordless drills and cordless impact drivers, these brackets can also fasten to cameras, laser alignment tools and other tools and devices that have screw ports to fit M2.5, M3 and M4 fasteners..Approved to the ANSI/ISEA 121-2018 standard.Stainless-steel bracket with built-in connection point for tool tethering is corrosion-resistant to withstand weathering.Patent-pending tool bracket design discretely fastens to open screw port on cordless drills/drivers so you barely notice it’s there.Set includes 1 bracket connection point, 6 fasteners with locking washers and 2 product labels.Perfect for smaller, cylindrical 12v. drills and impact drivers or other power tools where traditional retrofit attachments are not compatible.Ambidextrous design can be flipped to either side of the tool attaching to open screw ports meant for accessory belt clips.Fasteners include alloy steel M2.5 (8mm length) socket cap head, 2 stainless-steel M3 (8mm and 12mm lengths) Philips pan heads, and 3 stainless steel M4 (8mm, 10mm, 12mm lengths) Philips pan heads.Maximum tethering capacity of 2.5lbs. (1.13kg) for the M2.5 fastener and 3lbs. (1.36kg) for M3 and M4 fasteners
This compact silicone travel case by Global Printed Products is suitable for a variety of makeup brushes, lipsticks, etc. Features a stylish and sleek appearance that is easy to coordinate with other travel accessories..Compact travel case suitable for a variety of makeup brushes, lipsticks, and more.Made of flexible and durable silicone in light gray.Dimensions: 9"H x 3"W x 1.3"D.Stylish and sleek, the case is easy to coordinate with other travel accessories.Smooth and easy to rinse off and clean for long-lasting use.1-year manufacturer limited warranty
The Squids® 3798 Power Tool Bracket for Pneumatic Tools creates a unique tool attachment point to tether air/pneumatic power tools with a tool lanyard. Connection points for tool lanyards are not always readily available on power tools, which can create hazardous environments while working at heights if they are not tethered. Tethering your tools should be a part of an overall fall protection plan to reduce the risk of dropped objects and increase workplace safety.STRAIGHTFORWARD INSTALLATIONThe one-time assembly, creates a quick and easy one-step attachment to tether a lanyard to your pneumatic power tools. Simply fasten the included stainless-steel tool bracket and label with the coupler for the tool’s air hose connection (coupler and air hose not included). Once the coupler is threaded through the label and bracket and fastened securely to the air powered tool, the bracket will give a 360-degree rotating connection point for tool lanyards to safely and securely tether tools. PERFECT FOR AIR POWERED TOOLSThe Power Tool Bracket for Air/Pneumatic Tools is the perfect solution for smaller angle grinders, palm sanders, handheld buffers, pneumatic staplers, pneumatic nail guns, pneumatic rivet guns, and other air powered tools weighing up to 5lbs. (2.27kg.)..Approved to the ANSI/ISEA 121-2018 standard.Stainless-steel bracket with built-in connection point for tool tethering is corrosion-resistant to withstand weathering.Patent-pending tool bracket design fastens onto pneumatic/air powered tools using the tool’s air hose coupler.Set includes 1 bracket connection point and 1 product label.Perfect for a variety of pneumatic tools using an air hose like angle grinders, paddle sanders, handheld buffers, nailers, staplers and rivet guns.Fits couplers ranging in size from 1/4” (6.3mm) to 3/8” (9.5mm).Maximum tethering capacity of 5lbs. (2.26kg.)
Techprotectus kid friendly shockproof case Pink,iPad 10.2".Our iPad case features a 180-degree rotatable grip handle, making it incredibly easy for kids and students to carry their devices between school and home..It transforms into a dual-angle stand for hands-free entertainment, perfect for movie time or unleashing creativity through drawing..Crafted from impact-resistant EVA foam, this case is your iPad's shield against accidental drops, bumps, and pesky scratches..Our case boasts raised bezel edges, ensuring that the screen remains untouched and unscathed in the midst of bustling classrooms and active students..Made from super-lightweight and child-friendly non-toxic soft EVA foam.
Ergodyne® Squids® Black grabber with belt clip features dielectric or non-conductive material construction which clips to belts, tool belts and pants. Patented pattern grabber made of ultra-resilient acetal copolymer offers long lasting durability..Grabber-Belt Clip.Clips to belts, tool belts, pants and other clothing.Color: Black.6 per carton.Detachable, usable with 'beeners, D-rings, etc..Breakaway feature.Dielectric / non-conductive material.Durable, ultra-resilient acetal copolymer.Black.Connection: Belts, tool belts, pants, other clothing and D-rings.Material: Dielectric/ultra-resilient acetal copolymer material.Detachable, usable with beeners, D-rings, etc.Non-conductive, lightweight wonderclips offer safety-conscious advanced grabology.Ergodyne® Squids® Black grabber with belt clip has breakaway feature that is perfect for roofing, construction, warehousing, maintenance, mechanics, HVAC, plumbing, mitten security, mining, carpentry, electrician, contractors, oil and gas.