Single-Mode Patch Cables
5 results
2 Ports.Unmanaged switch.Cable length: 3.28'.Connector on first end: 2 x LC male network.Form factor: desktop.Connector on second end: 2 x sc male network.Device supported: network device.Fiber optic mode: single-mode.Cable characteristic: patch cable
This is a 2m single-mode fiber (SMF) duplex SC/LC OS1 yellow patch cable. This high quality SMF (9/125) patch cable is specifically designed for ethernet, multimedia, or communication applications, and is intended for use with 10Gb applications. This patch cable is suited for LANs or SANs, and is recommended for connection between fiber patch panels, hubs, switches, media converters and routers, etc. The low smoke zero halogen (LSZH) jacket protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial. It also provides the fire protection needed to run within walls and air plenums eliminating the need for conduits. The injection molding process provides each connection greater durability in resisting pulls, strains, and impacts from cabling installs. They provide higher speeds and increased bandwidth compared to conventional twisted-pair copper cable. Each cable is 100% optically tested for insertion loss before you take ownership. Our patch cables are 100% compliant for all of your networking needs. Our products are guaranteed by federal law to not affect or void OEM warranties..Yellow Duplex LC (Male) to SC (Male) cabling to provide reliable connectivity.2.0m (6.6ft) in length to fit the needs of your application.Complies with all multi-source agreement (MSA) standards to ensure seamless network integration.Application and environment tested and guaranteed to work.Limited Lifetime Warranty.2m LC (Male) to SC (Male) Yellow OS1 Duplex LSZH Single-Mode Fiber (SMF) Patch Cable
AddOn 6.5' Optic patch cable comes with low smoke zero halogen jacket and supports network devices. Cable with 2 x LC male connectors on both sides provides higher speeds with increased bandwidth and is ideal for LAN or SAN connectivity..2 x LC male/2 x LC male.Molded.Cable Length: 6.5'.Jacket material: Low smoke zero halogen.Cable type: Fiber optic.Yellow.Device supported: Network device.Core/Cladding diameter: 9/125 micrometer.Fiber optic mode: Single-mode.Fiber Qty: 2.Specifically designed for ethernet, multimedia, or communication applications is intended for use with 10Gb applications.Suited for LAN's or SAN's is recommended for connection between fiber patch panels, hubs, switches, media converters and routers.Low-smoke zero halogen (LSZH) jacket protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial.Provides the fire protection needed to run within walls and air plenums eliminating the need for conduit.Injection molding process provides each connection greater durability in resisting pulls, strains, and impacts from cabling installs.Provide higher speeds and increased bandwidth, compared to conventional twisted-pair copper cable.100% optically tested for insertion loss.Warranty: 3 years limited.AddOn 6.5' Optic patch cable in yellow color adds perfect choice for ethernet, multimedia or communication and 10GB applications and offers fire protection.
Patch cable..Yellow.Fiber optic LC Male/SC Male.Duplex single mode fiber is most commonly used in LAN applications.3'.Material: Polyvinyl Chloride (PVC) - jacket.Applications: Networking equipment that requires single mode fiber optic patch cables.Jacket type: Plenum.System requirements: Any fiber optic hardware or NIC card requiring singlemode duplex cable with LC/SC connectors.Diameter: 125 micron clad, 8.3 micron core.Number of fibers: 2.color-coded shrouds identify transmit and receive.Beveled edge on ends of glass makes insertion of plug a breeze.Insertion loss testing performed on every connector (0.2db typical) and provided with cable.Includes 1M duplex single mode fiber patch cable, LC/SC, duplex fiber optic patch cable.Compliant and standards: FDDI, OFNR.Warranty: Lifetime limited
Patch cable..Yellow.Fiber optic LC Male/SC Male.Duplex single mode fiber is most commonly used in LAN applications.16'.Material: Polyvinyl Chloride (PVC) - jacket.Applications: Networking equipment that requires single mode fiber optic patch cables.Jacket type: Plenum.System requirements: Any fiber optic hardware or NIC card requiring singlemode duplex cable with LC/SC connectors.Diameter: 125 micron clad, 8.3 micron core.Number of fibers: 2.color-coded shrouds identify transmit and receive.Beveled edge on ends of glass makes insertion of plug a breeze.Insertion loss testing performed on every connector (0.2db typical) and provided with cable.Includes 5M duplex single mode fiber patch cable, LC/SC, duplex fiber optic patch cable.Compliant and standards: FDDI, OFNR.Warranty: Lifetime limited
You May Also Like
Tripp Lite Duplex singlemode fiber patch cable has beveled edge on ends of glass that makes insertion of plug a breeze and color coded to identify transmit or receive. Cable has insertion loss testing performed on connector and provided with cable..Fiber optic.Beveled edge on ends of glass makes insertion of plug a breeze.3.28'.Yellow.Material: Polyvinyl chloride PVC jacket.Connections: 2 x LC male to 2 x LC male.Core/cladding diameter: 9/125 microm.Applications: Networking equipment that requires singlemode fiber optic patch cables.System requirements: Any fiber optic hardware or NIC card requiring singlemode duplex cable with LC/LC connectors.Insertion loss testing performed on every connector (0.2db typical) and provided with cable.Fiber made from glass.Color coded shrouds identify transmit and receive.Fiber optic distributed data interface (FDDI) rated.Includes 3' duplex singlemode fiber patch cable, LC/LC.Certifications and standards: FDDI, OFNR.Warranty: Lifetime limited.Tripp Lite Duplex singlemode 8.3/125 fiber patch cable measuring 3' is made of durable glass and provides twice bandwidth throughput of multimode.
Ideal solution for data applications requiring high speed data transmission and fiber connections in patch panels, hubs, switches, and routers..Yellow.Fiber optic/2 x LC male network first and second end.Use in gigabit Ethernet and fiber channel applications.3.28'.Type: Singlemode, Technology: Fiber optic.Core/cladding diameter: 9/125 micron.Jacket type: LSZH rated (low smoke zero halogen).Attenuation loss meets or exceeds industry standards.Molded connectors.Certifications and standards: RoHS.Weight: 0.7 oz..Warranty: Lifetime limited.Warranty: Lifetime limited
Fiber optic patch cable..Yellow.Fiber optic LC male/LC male.Duplex multimode fiber is most commonly used in LAN applications.10'.Material: Polyvinyl chloride (PVC) jacket, glass fiber.Applications: Networking equipment that requires single mode fiber optic patch cables
Fiber optic patch cable..Yellow.Fiber optic LC Male/SC Male.Duplex singlemode fiber is most commonly used in LAN applications.10'.Material: Polyvinyl chloride (PVC) jacket.Applications: Networking equipment that requires single mode fiber optic patch cabling.System requirements: Any fiber optic hardware or NIC card requiring singlemode duplex cable with LC/SC connectors.Diameter: 9 microns core, 125 microns clad.Fiber type: Glass.Beveled edge on ends of glass makes insertion of plug a breeze.Insertion loss testing performed on every connector (0.2db typical) and provided with cable.Includes duplex fiber optic patch cable, 10' duplex singlemode fiber patch LC/SC cable.Compliant and standards: FDDI, OFNR.Warranty: Lifetime limited
Includes 10' duplex MMF cable LC/LC 62.5/125 fiber cable..Orange.Fiber optic LC male/LC male.Duplex multimode fiber is most commonly used in LAN applications.10'.Material: Polyvinyl chloride (PVC) jacket, glass fiber.Applications: Computer networking (fiber).System requirements: Any fiber optic hardware or NIC card requiring multimode Duplex cable with SC/LC connectors.Core/cladding diameter: 62.5/125 micron m.Fiber optic mode: Multimode.Network speed: 1 Gbps.Insertion loss testing performed on every connector (0.2db typical) and provided with cable.color-coded shrouds identify transmit and receive.Compliant and standards: FDDI and OFNR.Warranty: Lifetime limited
This 2m LC/SC Duplex 50/125 Multimode Fiber Patch Cable provides a reliable connection between networking devices for high-speed long distance networks; tested/certified to be within acceptable optical insertion loss limits. Lifetime Warranty..Can maximize wiring conduit usage while minimizing installation problems.Fiber Optic cables provide a higher quality signal over a greater distance.Fiber Optic cables are an ultimate solution for high-speed data transmission.Backed by StarTech.com lifetime warranty.Connectors offer greater durability in resisting pulls, strains, and impacts during cable installation and maintentance.Immune to electricty interference.Attenuation loss meets or exceeds industry standards
Patch cable..Orange.Fiber optic LC Male/ST Male.Beveled edge on ends of glass makes insertion of plug a breeze.3'.Material: Polyvinyl Chloride (PVC) - jacket.Applications: Computer networking (fiber).Jacket type: Plenum.System requirements: Any fiber optic hardware or NIC card requiring multimode duplex cable with ST/LC connectors.Diameter: 125 micrometer clad, 62.5 micrometer core.Fiber type: 62.5/125 - OM1 all glass graded index.Network speed: 1Gbps.color-coded shrouds identify transmit and receive.Fiber made from glass (not a polymer).Insertion loss testing performed on every connector (0.2db typical) and provided with cable.Includes 1 meter duplex MMF LC/ST 62.5/125 fiber cable, duplex fiber optic patch cable.Compliant and standards: FDDI, OFNR, RoHS.Warranty: Lifetime limited
StarTech FIBLCLC3 3m Multimode 62.5/125 Duplex Fiber Patch Cable LC to LC.Can maximize wiring conduit usage while minimizing installation problems.Fiber optic cables provide a higher quality signal over a greater distance.Fiber Optic cables are an ultimate solution for high- speed data transmission.Cool/no heat so it doesn't destroy heat-sensitive papers.No warm-up or waiting, no odors.portable and compact for desktop operation, weighs only 8 1/2 lbs..Easy-to-use for goof-proof operation.Refills quickly with Scotch® refill cartridges.18-foot dual-laminate starter cartridge included.White.Max pouch thickness: Up to 9.2 mil.Throat width: 8 1/2".Laminating style: Cold.Perfect lamination without electricity.Safe, heat-free and easy to use, with no warm-up waiting time, no fumes and no mess.Ideal for posters, banners, artwork, signs, menus, maps and more.Fully compatible with inkjet, thermal and other sensitive papers.For documents up to 8 1/2" wide, 1/10" thick and 90-ft.long.Features easy-loading cartridge, adjustable input tray
Made from 50/125 zip cord fiber, the Tripp Lite Patch Cable features thoroughly tested dual LC connectors at each end which have minimum insertion loss. It is backwards compatible with 6.2 micron fiber and is equipped with built-in headroom for future applications. The cable is optimized for higher Gigabit and 10 Gbps networks with higher bandwidth capabilities. Beveled edges of the adapter are color coded for an easy and secure connection throughout your network..LCM/LCM fiber optic patch cable for efficient and high speed data transmission.Dual LC Male connectors for greater compatibility.Made from glass graded index fiber for minimum signal loss.OFNR rated PVC Jacket ensures durability.Compliance Standards: RoHS qualified.Comes with a limited lifetime warranty.The orange Tripp Lite 10' Duplex Fiber Optic LCM/LCM Patch Cable is optimized for high data transfer speeds of 1 Gbps making it a great choice for data centers and network applications.
The Tripp Lite yellow 26.25' patch cable quickly transmits clear data signals through LAN with a higher operating bandwidth. This single-mode fiber optic patch cable has two LC male on first end and two LC male on second end for connectivity. It has core/cladding diameter of 8.3/125 um and features durable PVC jacket for added protection. It supports network device, patch panel and switch. It delivers twice the bandwidth throughput of multimode cable. It has beveled edge on glass ends for easy plug insertion into patch panel or switch..Single-mode fiber optic patch cable transmits fast, clear data signals through LAN with a higher bandwidth.Cable length: 26.25'.Connections: Two LC male on both ends.Connectivity: Wired.PVC jacket for added safety.Meets RoHS, OFNR certifications and standards.Comes in yellow color.Core/cladding diameter: 8.3/125 um.Supports network device, patch panel and switch.Beveled edges on glass ends offer easy insertion into a patch panel or switch.Zip cord for easy plug insertion.Comes with lifetime limited warranty
Tripp Lite 2M Fiber optic duplex patch cable in aqua color allows serial transmission over extended distances in 850 nm wavelength window. Cable features high-speed parallel interconnects for head-ends, central offices and data centers..Aqua.Fiber optic LC Male/LC Male.Ideal for fiber-channel (SAN) applications.6'.Applications: Computer networking (fiber).Core/cladding diameter: 50/125 microm.Tripp Lite 2M Fiber optic duplex patch cable in aqua color is designed to use with 10GB Ethernet applications and has zero halogen aqua jackets.
StarTech Multimode 62.5/125 Duplex Fiber Patch Cable LC LC Network Cable 3.3 Ft Orange.Type: Network cable.Technology: Fiber optic.Type of Fiber Optics: Multimode.Features: Riser.Length: 3.3 ft.Core / Cladding Diameter: 62.5 / 125 micron.Connectors: 2 x LC multi-mode, male.Connectors (Other Side): 2 x LC multi-mode, male.Color: Orange.Manufacturer Warranty: Limited lifetime warranty.Multimode duplex fiber optic network cable provide connection between fiber networking devices for high-speed, long distance networks.
Tripp Lite® 3 m Duplex multimode fiber optic patch cable in orange color has LC male/SC male connectors on first and second end. Cable features beveled edge for easy insertion of plug and is made of PVC jacket for more durability..The cable has LC to SC connectors, a PVC jacket and is FDDI and OFNR rated.Multimode duplex fiber optic SC/LC patch cable is manufactured from 62.5/125 zipcord fiber.Attenuation loss meets or exceeds the latest industry standards.Loop-back cables provide an easier, "single-person" solution for testing fiber optic cable systems.Duplex multimode fiber is most commonly used in LAN applications.10 feet cable length
Tripp Lite® 2 m Duplex multimode fiber optic patch cable in in aqua color has LC male/male connectors on first and second end. Economical cable features high-speed, high-bandwidth and is used with VCSEL, LED laser light sources..Aqua.Cable type: Fiber optic.Cable length: 2m.Material: Low smoke zero halogen (LSZH) - jacket.Connector details: 2 x LC male IEEE 802.3ae network on first and second end.Fiber optic mode: Multi-mode.Features: Laser-optimized multimode fiber (LOMMF), high speed, high bandwidth, low-cost.Core/cladding diameter: 50/125 micrometer, backward compatible with legacy LAN's, Network speed: 10Gbps/40Gbps/100Gbps.Application: Computer networking.LOMMF cable allows 10Gb serial transmission over extended distances in the 850nm wavelength window, where low-cost Vertical Cavity Surface Emitting Lasers (VCSELs) enable a cost-effective, high bandwidth solution.Use with VCSEL and LED laser light sources and ideal for fibre channel (SAN) applications.Certification and Standards: OM4 rated, TIA LOMMF compliant, RoHS.Warranty: Lifetime limited.Tripp Lite® 2 m Duplex multimode fiber patch cable in aqua color has LC male/male connectors and is used for fiber channel applications.
Tripp Lite 1M Fiber optic duplex 62.5/125 patch cable has connector edges which are beveled and color coded for easy or secure connection throughout your network. Cable has LC connectors on each end, a PVC jacket and is FDDI and OFNR rated..Orange.Fiber optic LC Male/LC Male.Duplex multimode fiber is most commonly used in LAN applications where links are 10 feet or less.3'.Material: Polyvinyl Chloride (PVC) - jacket.Applications: Computer networking (fiber).System requirements: Any fiber optic hardware or NIC card requiring multimode duplex cable with LC connectors.Diameter: 125 micrometer clad, 62.5 micrometer core.Fiber type: 62.5/125 - OM1 all glass graded index.Network speed: 1Gbps.color-coded shrouds identify transmit and receive.Beveled edge on ends of glass makes insertion of plug a breeze.Fiber made from glass (not a polymer).Includes 1M duplex MMF cable LC/LC 62.5/125 micron fiber, fiber optic duplex patch cable(Riser).Compliant and standards: FDDI, OFNR, ROHS.Warranty: Lifetime limited
Tripp Lite 6' yellow fiber optic patch cable.Patch cable is perfect for fibre channel (SAN) applications.Length: 6'.Has two LC male connectors on both ends.PVC plenum jacket offers protection against corrosive environment.Core/cladding diameter: 8.3/125 u