SSD Adapter Converters

Startech.com® M.2 NGFF SSD to 2.5" SATA adapter converter is supported with PC, Mac as well as Linux platform and has 1 expansion bay. Adapter converter helps to reduce data transfer bottleneck with file transfer speed up to 6 Gb/s..Interfaces/ports: Drive: 1 - M.2 (NGFF) receptacle, host: 1 - SATA Data & Power Combo (7+15 pin) receptacle.No of expansion bays: 1.Maximum data transfer rate: 6 Gb/s, Type and rate: SATA III.Maximize system speed by adding M.2 SSD performance.Help protect the health of your drive with an open-frame design that maximizes heat dissipation.Reduce overall power consumption, with a high efficiency M.2 SSD.Drive type: M.2 (NGFF).OS compatibility: Windows XP (32/64 bit)/ Server 2003 (32/64 bit)/ Server 2008 R2/ Server 2012/ Vista (32/64 bit)/ 7 (32/64 bit)/ 8/8.1 (32/64 bit) Mac OS X, Linux.Operating temperature: -40 - 185 deg F.Included: 1 x M.2 NGFF SSD to 2.5in SATA SSD Converter, 1 x mounting screw kit, 1 x installation manual.Dimensions: 0.3"(H) x 2.8"(W) x 3.9"(D), 1.3 oz..Warranty: 2 years limited.Startech.com® M.2 NGFF SSD to 2.5" SATA adapter converter has an open-frame design to maximize heat dissipation and reduces the power consumption over regular platter drives.

StarTech.com® SAT2M2NGFF25 M.2 SSD to 2.5" SATA III Adapter has aluminum and plastic enclosure for long lasting durability. Protects your M.2 NGFF SSD in any 2.5" application with protective housing. Adapter reduces your data transfer bottleneck with maximum file transfer speeds up to 6 Gb/s. Supports multiple drive heights like 2242/2260/2280 for wide compatibility with all of the common M.2 solid state drives..M.2 to SATA III adapter helps you to convert M.2 NGFF solid state drive into a standard 2.5" form factor.Measures 0.3"H x 2.7"W x 3.9"D.Comes in black color for new look.Has internal board form factor, data transfer rate of 6 Gb/s and supports solid state drive devices.Has fixed drive installation for convenience.Suitable for M.2 drive types.Has 1 drive for convenience.Supported 2242, 2260, 2280 drives.Features SATA III interface with 7+15 pin SATA data and power combo receptacle connector for good connectivity.Has aluminum and plastic enclosure for long-lasting strength.Allows you to add M.2 SSD performance to any computer system by converting M.2 to SATA.M.2 NGFF SSD comes with enclosed housing for protection in any 2.5in application.Operates at a temperature of 32 to 122 deg F, storage temperature of 14 to 185 deg F and humidity of 5 - 95percentage RH.Comes with M.2 NGFF SSD to 2.5" SATA adapter, SSD mounting kit, housing mounting kit, mini screw driver and instruction manual.Weighs 1.8 oz.Comes with 2 years warranty.StarTech.com® Black SATA III adapter allows to convert M.2 NGFF solid state drive into a standard 2.5" form factor. Supports maximum data transfer rate of up to 6 Gb/s.

Icy Dock® EZConvert 2.5" To 3.5" SATA SSD/Hard Drive Converter; Black.Hard drive accessory type: SATA SSD / Hard Drive Converter.Black.Dimensions: 1"(H) x 4"(W) x 5.7"(D).Interface: SATA/300.Drive fit: 3 1/2" SATA hard drive bay.Material: Plastic.Transfer rate: Up to 6 Gbps, form factor: Internal.Hot swap.Perfect for system integrators and IT professionals.Airflow vents for heat dissipation with shockproof design.Black SSD and SATA hard drive converter is designed to fit into most common PC cases, 3.5" HDD duplicator, 3.5" SATA HDD enclosure, mobile rack, and backplane modules without having to purchase any attachments for the 2.5" drives.

Startech.com® 40-Pin IDE PATA to SATA adapter converter provides ODD support which allows you to add Blu-ray, DVD or CD-ROM drives to an older IDE motherboard. Converter provides support for 48-bit logical block addressing..Hard drive accessory type: IDE to SATA adapter converter.Red.Dimensions: 0.9"(H) x 0.8"(W).Chipset ID: Marvell 88SA8852.Connector type: 1 x IDE (40 Pin, EIDE/PATA), 1 x SATA data and power combo (7+15 pin), 1 x SP4 (4 pin small drive power).Maximum data transfer rate: 133 Mbps.Blu-ray, DVD and CD-ROM drive compatibility with ODD (Optical Disk Drive) support, from an IDE host connection.Hassle free installation, with no software CD required.Support for 48-bit logical block addressing.Compliant with SATA revision 1.0 specification, compatible with Ultra ATA 133 specification.Supports 2 1/2", 3 1/2", and 5 1/4" SATA drives.Internal solution for connecting your SATA hard drive to a motherboard supporting an IDE interface.Ideal for use with older motherboards that do not support SATA.Compatibility: Blu-ray drive, DVD drive, CD-ROM drive.Environmental info: 5 - 50 Deg C operating temperature, 15 - 90% relative humidity.System requirements: An IDE controller and ATA cable.Certifications and standards: FCC, RoHS.Includes 40-pin IDE PATA to SATA adapter converter for HDD/SSD/ODD, 1 x LP4 Molex to SP4 power cable, 1 x instruction manual.Warranty: 2 years limited.Startech.com® 40-Pin IDE PATA to SATA adapter converter helps to connect a SATA device to an IDE/ATA motherboard and is ideal for use with older motherboards that do not support SATA.

As the leading innovator in 2.5" drive converters, we're often in pursuit of designing the next best thing. With the Icy Dock EZConvert Lite, we took the already proven EZConvert MB882 series converters and maximized the air flow with open air designs that is certainly made to impress. The EZConverter Lite MB882SP-1S-3B converts 2.5 SATA/SAS hard drives or SSD of all heights into an exact form factor of a 3.5" SATA hard drive so you can fit your 2.5" SSD or notebook drive anywhere a 3.5" SATA drive is used (requires SAS host for SAS drives). The EZConvert Lite crafted from one piece construction makes it lightweight yet practically unbreakable –a necessary attribute for high quality system builds. Our open air design and perforated vents help keep your drives nice and cool. Anti-vibration springs help your drives from slight impact yet our drive stabilizing mechanism keeps your drives in place; it strikes a balance to carefully maintain your drives. This converter is made for any consumer or builder looking to add a 2.5" drive to their setup, from gaming rig or media workstation to enterprise data server..Converts 2.5" SATA/SAS hard drives or SSDs of all heights into the exact form factor of a 3.5" SATA hard drive, so you can fit your 2.5" SSD or notebook drive anywhere a 3.5" SATA drive is used.Dimensions: 1"H x 4"W x 5.77"D.Made of ABS plastic and aluminum in black.Featuring EZ-Fit design for anti-shock and optimal drive fit.Open air design with all-around airflow vents for maximum air flow.Completely toolless drive installation for quick and easy setup.Supports 2.5" SAS HDD/SSD with single-channel SAS functions (requires SAS host).Supports SATA 6Gbps or SAS single channel.Universal mounting holes for most common PC cases.Optional screw hole for extra drive security.Perfect for anyone looking to add a 2.5" SATA HDD/SSD to their system.3-year manufacturer limited warranty

Icy Dock® EZConvert Pro Enterprise Full Metal 2.5" To 3.5" SAS Hard Drive/SSD Converter; Silver.Drive capacity: 2TB support.Interface/ports: SAS 6Gbps, SATA/600.No. of expansion bays: 1.Structure: Metal.Silver.Drive fit: 3.5" SAS drive bay (SAS host is required).Drive bay: 1 x 2.5".Compatible with most 3 1/2" SAS HDD backplanes, rackmounts and hot-swap devices.Screw less design for quick and easy installation, designed for system integrators and IT professionals.Full metal and heavy duty with easy access to drives.Silver EZConvert Pro series Enterprise full metal 2.5" to 3.5" SAS hard drive/SSD converter features screw less design for quick and easy installation.

Icy Dock® EZConvert Pro Enterprise Full Metal 2.5" To 3.5" SATA Hard Drive/SSD Converter; Silver.Hard drive accessory type: SATA hard disk drive /SSD converter.Silver.Dimensions: 1"(H) x 4"(W) x 5.77"(D).Interface: SAS, SATA.Drive fit: 3 1/2" SATA hard drive bay.Material: Metal.Transfer rate: Up to 6 Gbps, form factor: Internal.Supports 2TB, extra protection.Perfect for system integrators and IT professionals.Airflow vents for heat dissipation with anti vibration design.Silver SATA hard disk drive /SSD converter is designed using the dimensions, connection locations, and mounting hole positions of a standard 3.5" SATA drive.

As the leading innovator in 2.5" drive converters, we're often in pursuit of designing the next best thing. With the EZConvert Lite MB882SP-1S-3B, we took the already proven EZConvert MB882 series converters and maximized the air flow with open air designs that is certainly made to impress. The EZConverter Lite MB882SP-1S-3B converts 2.5 SATA/SAS hard drives or SSD of all heights (7mm to 15mm) into an exact form factor of a 3.5" SATA hard drive so you can fit your 2.5" SSD or notebook drive anywhere a 3.5" SATA drive is used (requires SAS host for SAS drives). The EZConvert Lite crafted from one piece construction makes it lightweight yet practically unbreakable -a necessary attribute for high quality system builds. Our open air design and perforated vents help keep your drives nice and cool. Anti-vibration springs help your drives from slight impact yet our drive stabilizing mechanism keeps your drives in place; it strikes a balance to carefully maintain your drives. This converter is made for any consumer or builder looking to add a 2.5" drive to their setup, from gaming rig or media workstation to enterprise data server..Drive Interface: Serial ATA/600, SAS.Number of Total Expansion Bays: 1.Number of 2.5" Bays: 1.Useful for the multi-tenant unit and multi-business unit with Layer 4 traffic classifiers and bandwidth limit

Here's a fast, easy way to access data on a 2.5" solid-state or hard drive. This cable-style adapter lets you connect your laptop or desktop computer directly to a solid-state drive and access it through ultra-fast USB 3.1 Gen. 2 (up to 10 Gbps). With the adapter cable, you can quickly swap hard drives without having to install your drives into an enclosure. You can copy or retrieve data from a 2.5" SSD/HDD quickly with no additional accessories required. It gives you easy drive access for data migration, drive cloning and data backup applications, with the fast performance of USB 3.1 Gen 2. USB 3.1 Gen 2 gives you greater bandwidth and speed with rates of up to 10 Gbps - twice the speed of USB 3.0 (USB 3.1 Gen 1) technology. It lets you leverage the high performance of the latest SSDs and hard drives, while alleviating bottlenecks in your data transfers. This cable-style adapter features a compact, lightweight design that tucks easily into a laptop bag or carrying case. Use it wherever you go to access valuable data quickly - with no external power required..QUICKLY ACCESS A SATA SSD OR HDD: This USB 3.1 to SATA cable delivers instant access to your 2.5" SATA drives from your laptop or computer; The adapter is compatible with SATA I, II and III (up to 6Gbps) NOTE: Supports 2.5" SATA drives only. For 3.5" drives please see our USB312SAT3.FAST TRANSFER SPEEDS & UASP SUPPORT: The SATA hard drive adapter cable lets users experience enhanced performance and super-fast data transfer speeds with support for USB 3.1 (10Gbps) and UASP.CONNECT FROM ANYWHERE: The external HDD / SSD storage converter delivers perfect portability, tucking away nicely in a laptop bag; The cable-style adapter is USB-powered so no external power cords are required.1 x SATA/Power.PLUG-AND-PLAY: Access any 2.5" hard drive or solid-state drive from any USB enabled computer by simply plugging in the SATA adapter cable; you can easily swap between drives with no need to install the drive inside an enclosure.Black.Connect a 2.5" SATA SSD/HDD to your computer using this USB 3.1 Gen 2 ultra-portable cable

StarTech Hard drive converter measures 1" x 3.9" x 5.7" and is designed for 2 1/2" SATA/SAS SSD/HDD to 3 1/2" SATA conversion. Internal converter features Lightweight plastic construction with air vents..Black.Interfaces: SAS, serial ATA.Interface connectors: 1 - SFF - 8482 (29 pin, data and power, internal SAS) receptacle, 1 - SATA data and power combo (7+15 pin) plug.Form factor: Internal.Dimensions: 1"(H) x 3.9"(W) x 5.7"(L).Applications: Install a 2 1/2" hard drive into a 3 1/2" hard drive enclosure or backplane.Lightweight plastic construction with air vents.Supports 2 1/2" form factor hard drives (HDD) and solid state drives (SSD) up to 15 mm in height.Includes: 2 1/2" - 3 1/2" HDD converter.Certifications and standards: RoHS, FCC, CE.Weight: 4.8 oz..Warranty: 2 years limited.StarTech 2.5-to-3.5-Inch Drive Converter - Avoid Buying New Hard Drives

Icy Dock EZConvert is a complete solution to convert any M.2 SATA SSD into the exact dimensions and port locations as a standard 2.5" SATA SSD. Designed for compatibility, it accepts all M.2 sizes from 30mm to 80mm in length, mounting them without screws or tools, and allows these drives to be installed anywhere that accepts a bare 2.5" drive, such as a 2.5" drive bay, 2.5" mounting bracket, or in any of ICY DOCK's 2.5" drive enclosures. MB703M2P-B protects the delicate circuit board of your M.2 SSDs from bumps and drops..Complete solution to convert any M.2 SATA SSD into the exact dimensions and port locations as a standard 2.5" SATA SSD.Dimensions: 0.37"H x 2.76"W x 3.98"D.Made of ABS plastic and aluminum in black.Exact same dimensions, port locations, and screw locations as a 2.5" SSD.Accepts any M.2 SATA SSD.Supports full SATA III bandwidth specification (6Gbps).100% toolless and screwless M.2 drive installation.Can be installed into any 2.5" drive backplane, 2.5" drive bay, or USB drive adapter.3-year manufacturer limited warranty

Dual M.2 PCIe SSD Adapter Card - x8 / x16 Dual NVMe or AHCI M.2 SSD to PCI Express 3.0 - M.2 NGFF PCIe (M-Key) Compatible - Supports 2242, 2260, 2280 - JBOD - Mac & PC (PEX8M2E2).BACKWARD COMPATIBILITY: Compatible w/ PCIe 1.0 & 2.0 and x8 or x16 slots, PCIe bifurcation is not required. Works with all workstation and server OS's such as Windows, Linux, and macOS incl. legacy..HIGH PERFORMANCE: Install 2 PCIe 3.0 M.2 SSDs (NVMe or AHCI) into your workstation or server for read/write speeds up to 3GB/s and 2.8GB/s for single-drives or 2.4GB/s and 1.42GB/s (per drive) for 2.RAID FUNCTIONALITY: M.2 PCI Express adapter lets you use SSDs individually or in a storage pool using OS or 3rd party RAID software (RAID 0, 1, SPAN, JBOD) for tiered/hybrid storage.VENTED DUAL-PROFILE BRACKETS: Pre-installed full profile bracket with low-profile (half-height) bracket in box & vented design for better cooling, avoiding drive throttling and improving reliability..WIDE COMPATIBILITY: Dual M.2 PCIe SSD adapter card was extensively tested to ensure compatibility w/ Samsung 970 evo, 950 Pro, SM951, & other 2242, 2260, 2280mm PCIe M-Key M.2 NGFF SSDs (NVMe or AHCI).PCI Express 3.0 M.2 SSD Adapter Card | For PCIe NVMe and PCIe AHCI M.2 SSDs

Get ultra-fast data access by adding an NVMe U.2 SSD to your computer. This U.2 to PCIe adapter lets you add a high-speed, U.2 (4-lane PCIe) 2.5" NVMe SSD, such as the Intel® 750 Series drive, to a PC with an available x4 PCI Express expansion slot. You can mount the PCIe U.2 drive directly onto the adapter, giving you an easy and convenient way to improve your system performance and expand overall internal storage. Boost your system speed and performance The expansion card lets you take full advantage of the fast performance and compact size of PCIe U.2 internal solid-state drives. The adapter connects directly to your computer motherboard to support an NVMe U.2 PCIe-based SSD through ultra-fast x4 PCIe. With the U.2 PCIe-based drive in place, the adapter gives your computer a significant speed boost. Easy to install The expansion card is equipped with a full-profile bracket and doesn't require an adapter cable for installation, this helps to reduce clutter and simplifies system builds. The drive connects directly to the SFF-8639 connector on the adapter, and the adapter connects directly to the computer motherboard. The adapter is compatible with PCIe 3.0 motherboards and is also backward compatible with PCIe 2.0 and PCIe 1.0. The PEX4SFF8639 is backed by a StarTech.com 2-year warranty and free lifetime technical support..Boost system speed and performance by adding a PCIe NVMe U.2 SSD to your PC.Simplify system builds with a U.2 to PCIe adapter that mounts your SSD directly to the adapter, with no need for adapter cables.PCI Express 3.0 x4 lane host adapter.Compatible with x4 PCIe 3.0 motherboards, and backward compatible with PCIe 2.0 and PCIe 1.0.OS independent with no drivers required, for a fast, hassle-free setup

Add the fast performance of an M.2 NVMe SSD to your desktop computer or server by converting the drive through a U.2 (SFF-8639) compatible interface on your motherboard. This PCI Express M.2 to U.2 adapter makes it easy to install an M.2 PCIe NVMe SSD into your desktop PC or server, and connect to the drive through an available U.2 (SFF-8639) compatible interface on your motherboard.Upgrade your system cost-effectively.Increase your system speed and performance cost-effectively, by adding an M.2 PCIe NVMe SSD to your PC or server.Adapter supports one M.2 PCIe NVMe SSD (M-Key).U.2 (SFF-8639) host interface

Convert and connect a PCIe M.2 NVMe/AHCI SSD to a 2.5" form factor to install in U.3 drive bays/backplanes. Compatible with U.3 (SFF-TA-1001) host interfaces; M.2 to U.3 adapter is TAA compliant. Change the form factor of a 2242, 2260, or 2280 M.2 NVMe drive while preserving the read and write speeds. No chipset design ensures no loss in performance when adapting to 2.5". M.2 to U.3 Host Adapter works with all operating systems including Windows, macOS, and Linux. M2 to U.3 Adapter requires no additional drivers or software. Includes drive and adapter mounting screws for an efficient installation..Convert and connect a PCIe M.2 NVMe/AHCI SSD to a 2.5" form factor with this adapter.Designed for M.2 NVMe drives.Internal Interface: M.2 NVMe; external Interface: U.3 2.5" form factor.Drive type: PCIe M.2 NVMe/AHCI SSD.Comes in red.Change the form factor of a 2242, 2260, or 2280 M.2 NVMe drive while preserving the read and write speeds.Works with all operating systems including Windows, macOS, and Linux.Open frame design enables support for M.2 drives with larger heatsinks, and allows for better airflow.Supports PCIe 4.0 and lower drives.Meets or exceeds the RoHS, TAA, and WEEE standards.2-year manufacturer limited warranty

Startech® 8.3" USB 3.0 to 2.5" SATA III Hard Drive Adapter Cable W/UASP/SATA to USB3.0 Converter.Hard drive accessory type: SATA III hard drive adapter cable.8.3".Black.Dimensions: 0.4"(H) x 1.9"(W) x 8.3"(L).Interfaces: Drive connector: 1 x 7+15-pin SATA data & power combo receptacle, host connectors: 1 x 9-pin SuperSpeed USB 3.0 A male.Conductor: Copper.Supports USB 3.0 data transfer speeds of 5Gbps and is backward compatible with USB 2.0.Copper.SATA to USB Adapter Cable | SATA III 6Gbps | 2.5" SSD or HDD | USB 3.0 | Portable

StarTech 2.5" to 3.5" SATA Hard Drive Adapter Enclosure.Hard drive accessory type: SATA hard drive adapter enclosure.Dimensions: 1.4"(H) x 4"(W) x 5.7"(L).Interfaces: Drive connector: SATA/600.Support for SATA revision I/II/III (1.5/3/6 Gbps), tool less installation, supports 2.5" SSD/HDD up to 12.5 mm in height, standard 3.5" HDD mounting points, material: Aluminum, plastic.Drive connectors: 1 x SATA data and power combo (7+15-pin), host connectors: 1 x SATA data and power combo (7+15-pin).Data transfer rate: 6 Gbps SATA III.Max drive capacity: Currently tested with up to 1TB 7200 RPM hard drives.Operating temperature: 5 - 55 deg C, humidity: 5 - 85%RH.Drive size: 2 1/2", drive installation: Removable.Supports 2 1/2" SSD/HDD up to 12.5 mm in height, SATA revision I/II/III (1.5/3.0/6.0 Gbps).Improve the performance speed of any 3 1/2" hard drive application by adapting a 2 1/2" solid state drive.Tool less installation.I/O expansions: Number of total expansion bays: 1, number of 2 1/2" bays: 1.Includes 1 x 2 1/2" to 3 1/2" SATA HDD/SSD enclosure, 1 x screw kit, 1 x install guide.Weight: 9.2 oz..Warranty: 2 years limited.Startech.com® 2 1/2" to 3 1/2" SATA hard drive adapter enclosure has internal form factor and includes serial ATA/600 drive interface.

Dual M.2 PCIe SSD Adapter Card, x8 / x16 Dual NVMe or AHCI M.2 SSD to PCI Express 4.0, Up to 7.8GBps/Drive, For 2242/2260/2280/22110mm PCIe M-Key M2 SSDs, Bifurcation Required - PC/Linux Compatible.This Dual M.2 PCIe SSD Adapter enables you to install 2x PCIe M.2 SSDs (NVMe or AHCI) into a computer through an available x8/x16 PCI Express 4.0 slot | Read and write speeds up to 7.8GBps per drive.PCIe Bifurcation support is required by the Computer/Motherboard | Compatible with PCIe 3.0 x8 or x16 slots | Windows/Linux.Access the M.2 PCIe SSDs individually | Software RAID support for RAID 0/RAID 1/JBOD.Vented full-profile bracket pre-installed and low-profile bracket included.Dual M.2 NVMe / AHCI | PCIe 4.0 x8 or x16 Slot | Bifurcation

The StarTech.com PEX4M2E1 x4 PCIe express to M.2 PCIe SSD adapter offers best cost effective solution for ultra fast data access, as well as boost your system speed and performance by adding a PCIe M.2 SSD to your PC. This red adapter is equipped with a full profile bracket and includes a low profile bracket for installation in small form factor computers..Bus type: PCI Express.Compatible drive types (Type and Rate): M.2 (NGFF, M-Key, PCIe x4).Drive installation: Fixed.Drive size: 22 m - M.2 NGFF.Interface: PCI Express.Supported drive height(s): 2242, 2260, 2280, 22110.Drive connectors: 1 x M.2 (NGFF, M-Key, PCIe x4).Host connectors: 1 x PCI Express x4 male.OS compatibility: OS independent.LED indicators: 1 x pin header on board for drive LED connection.Operating temperature: 5 to 50 deg C (41 to 122 deg F), storage temperature -25 to 70 deg C (-13 to 158 deg F).Comes in red color.Max drive height: 4.3".Dimensions: 7.2"H x 4.8"W x 7"L.Weight: 1.6 oz..Comes with 2 year warranty

Introducing the ICY DOCK MB882SP-1S-2B: another milestone in our 2.5" SSD product line. Through manufacturing efficiency, we have managed to redesign the original MB882SP-1S-1B without any sacrifice to our standard of high quality products. The new version is lighter weight for simplicity and cost efficiency. It is very convenient for gamers and power users who expect SSD speed on their home/ office computers. Some other new elements to the converter are viewing slots placed over the SATA connection, allowing the user to verify their HDD or SSD has made a secure connection. This also functions as an extra set of airflow vents for extra cooling with your SSD or HDD. Overall, a lightweight and simplistic design that is perfect for power users, gamers, and average computer users for use in their desktops, media centers, and home servers..Drive Interface: Serial ATA/300.Number of Total Expansion Bays: 1.Number of 2.5" Bays: 1.AMD Radeon R7 M460 Up to 2 GB discrete graphic card provides excellent ability in a variety of multimedia applications and user experiences

Install an SSD into a desktop or server using an available PCI Express 4.0 slot. The pre-installed full-profile bracket and included drive mounting screws enable the connection of a U.3 NVMe drive to a PCIe slot, avoiding the need for a drive backplane or additional cables. This adapter is not compatible with U.2 drives. The StarTech adapter card is backward compatible with motherboards that feature x4, x8, and/or x16 PCIe 3.0 slots. The U.3 adapter requires no additional drivers or software and works with all workstation and server operating systems, such as Windows, Windows Server, and Linux..To enable ultrafast data access, add a 2.5" U.3 NVMe SSD into a PCIe 4.0 x4/x8/x16 slot in a desktop or server using the included screws.Pre-installed full-profile bracket and included drive mounting screws enable the connection of a U.3 drive to a PCIe slot, without the need of a drive backplane or additional cables.Supports SFF-TA-1001 drives up to 15mm in height; not compatible with U.2 drives.Works with all workstation and server operating systems such as Windows, Windows Server, and Linux.Vented full-profile bracket and a large cutout in the PCB allow for better airflow and heat dissipation, which helps maintain optimal and reliable performance while reducing potential thermal throttling.Backward compatible with PCIe 3.0 motherboards that have an available x4, x8, or x16 PCIe slot.Box contains: adapter, four drive mounting screws, quick start guide.2-year manufacturer limited warranty

Icy Dock® ToughArmor EX 2.5"/3.5" Internal SATA/SAS HDD/SSD Mobile Rack Drive Bay Adapter; Black (MB492SKLB).Drive fit: Two 2.5" SAS/SATA HDD/SSD.Drive bay fit: 3.5" front device bay (floppy bay).Transfer rate: Up to 6 Gbps.Power input: Single 15-pin SATA power port.Drive cooling: Metal heat dispersion.LED indication: Solid green LED power, flashing amber LED HDD access.Drive security: Two segment key lock + thumbscrew lock.Dimensions: 1"H x 4"W x 5.4"D.Supported drive capacity: 2TB.Features heavy-duty full metal construction and is perfect for enterprise applications.Multi-Flow technology provides effective and excellent passive cooling.Anti-Vibration technology aids to create a safe environment for hard drives or SSDs.Active Power Technology (APT): Individual led only powers up if there is drive installed in the drive bay.Contains user manual, screws, keys and drive ID plug.Weight: 1.77 lbs..Comes with 3 years warranty

Connect a 2.5" or 3.5" SATA SSD/HDD to your USB-C enabled computer, with this USB 3.1 adapter cable. This USB-C™ to SATA adapter cable gives you fast and easy access to the data on your 2.5 in./3.5 in. solid-state drives and hard drives. The adapter cable lets you connect your USB-C enabled laptop or desktop computer directly to a SATA drive and access it through ultra-fast USB 3.1 Gen. 2 (up to 10Gbps)..Connect a 2.5"/3.5" SATA drive to your USB-C enabled laptop or desktop computer, for quick access to your external data.Fast data transfer rates through USB 3.1 Gen 2 (10Gbps).Integrated 1 m cable, for convenient use.Certifications and standards: WEEE, RoHS

M.2 NVMe SSD to PCIe x4 Removable Mobile Rack for PCI Express Expansion Slot, Tool-less Installation, PCIe Hot-Swap Drive Bay.REMOVABLE M.2 DRIVE BAY: Use an available PCIe 4.0 x4 expansion slot to install, remove, or swap PCIe M.2 SSDs (NVMe or AHCI); Supports 2230, 2242, 2260, and 2280 M-Key M.2 NVMe SSDs; Capable of reaching high-performance read/write speeds up to 64Gbps.TOOLLESS INSTALLATION: Install an M.2 drive into the drive tray or insert the tray into the drive bay without the need for tools; Power/Activity LED indicator; Drive tray features a latching mechanism and is lockable for secure installation (2 keys incl.).OPTIMAL PERFORMANCE: Vented stainless steel frame, bracket, and tray with thermal pads and aluminum cover aid heat dissipation; Anti-vibration springs on the drive tray reduce shock or vibrations; Optional screw for stability; Incl. Low-profile bracket.COMPATIBILITY: No drivers or software required and works on any operating system including Windows, Windows Server, Linux; Supports PCI Express 4.0 and 3.0 motherboards with an available x4, x8, or x16 slot; Not compatible with M.2 SATA drives.HOT SWAP: Additional drive trays (TR-M2-REMOVABLE-PCIE, sold separately, coming soon) offer flexibility/convenience when working with multiple drives; PCIe hot swap support is dependent on the motherboard, check with the manufacturer to confirm support.Additional drive trays (TR-M2-REMOVABLE-PCIE, sold separately) provide flexibility and convenience when managing multiple M.2 drives. NVMe PCIe hot swap support is dependent on the motherboard. Verify hot swap support with the manufacturer of the motherboard, and for instructions regarding how to enable this feature..The vented stainless-steel frame and tray with thermal pads aids heat dissipation, ensuring optimal and reliable performance while reducing potential thermal throttling. Anti-vibration springs on the drive tray reduce impact during installation and enhance the overall stability and longevity of the drive. A low-profile bracket is included for small form-factor systems..Install an M.2 drive into the drive tray and insert the tray into the drive bay, without the need for tools. The drive tray features a power/activity LED indicator to monitor drive status. A latching mechanism with optional lock (2 keys included) deters the theft of mission-critical data storage devices..Package Contents:M.2 to PCIe Adapter Card,1 x Low-Profile Bracket,1 x M.2 Drive Tray,1 x Set of Keys,1 x Quick-Start Guide.StarTech.com M.2 NVMe SSD to PCIe x4 Removable Mobile Rack for PCI Express Expansion Slot, Tool-less Installation, PCIe Hot-Swap Drive Bay - Utilize a PCIe x4 expansion slot as a removable drive bay for M.2 SSDs; Supports up to 2280 M-Key M.2 NVMe SSDs; Tool-less installation; Lockable Drive Tray (2 keys incl.); Tray with thermal pads/anti-vibration springs; No drivers/software required

ff244423cfca789cd3ea284efccd5070.Exact same form factor of a slim optical drive..Fits 1 x 5mm to 9.5mm height 2.5" SATA HDD / SSD in a 12.7mm slim ODD bay..Supports transfer speed up to 6Gbps.The receiving SATA connector rated for up to 10,000 drive insertions.Removable EZ Slide Micro drive tray for easy maintenance.

The Next Generation NVMe Mobile Rack: The MB601VK-B is ICY DOCK's next generation PCI-E based mobile rack with ability in supporting Intel, Micron, and Seagate ultra high speed 2.5" U.2 NVMe solid-state-disk in an external 3.5" floppy drive bay. Superior Performance : Built with the next generation U.2 interface, MB601VK-B offers up to 32Gb/s of bandwidth and supports 2.5" U.2 NVMe SSD, SAS and SATA interface 2.5" solid state drives or hard drives. The superior performance of MB601VK-B provides the maximum amount of transfer speed for the most data intensive tasks; such as real time large database transfers and refreshes, massive bulk data swaps from multiple networks, VMware providing virtual operating systems for mulitple computers, and large scale editing of large multimedia assets of virtual reality, video, music, and other graphics between multiple workstations. Convenient Utility Accessibility: The EZ Slide Mini trays supports U.2 hot-swap feature, which makes U.2 NVMe SSD interchangeability and maintenance completely hassle-free. With a simple swap of the SSD / HDD, your overall down time is greatly reduced especially when a drive is needed to be switched. The tray is also designed to accommodate 7 to 15mm height hard drives and SSD, creating a 2.5" hot swap bay for U.2 NVMe SSD or any standard SAS / SATA hard drives and SSDs. While the tray is not inside the MB601VK-B, the Anti-Dust Flap feature helps prevent dust from entering into the mobile rack. The front of the MB601VK-B includes a status LED when the drive is powered on, off and accessed. Active Power Technology (APT) allows the status LED to be on only when a hard drive is inserted into the enclosure. For drive security, the eagle-hook lock system on the tray makes sure your hard drives will not eject when not needed. Additionally, the 2 segment key lock provides extra protection to theft of hard drives as well as safeguards any sensitive data. Full Metal Protection: Making sure that the material used is designed in a way where it can be relied upon for many years after its deployment, the MB601VK-B is constructed out of heavy duty metal throughout the entire device and is capable of holding up in the harshest environments. With the Full Metal design, the ToughArmor is perfect for industrial, military and medical devices that may require a flammability rating as the full metal material is considered to be compliant with flammability requirements..Fits 1 x 2.5" U.2 NVMe SSD or 2.5" SAS / SATA SSD / HDD.NVMe U.2 host is required to accept NVMe SSD, SAS or SATA SSD / HDD.Fits any external 3.5" drive bay or floppy bay

The EZ-Fit Lite MB290SP-B is a great choice if you're looking to install 1 or 2 SSDs/2.5" HDDs into a single 3.5" bay. If you're looking for storage density, compatibility, flexibility, and durability without the hassle of a complicated installation, go with the EZ-Fit Lite MB290SP-B. It's never been easier to effortlessly install 2.5" drives in a system. We, IcyDock, put a lot of thought into the design to fulfill the needs of our customers, whether they're building Home Theater Systems (HTPC), Gaming PCs, or Mini-IPX systems. Our EZ-Fit Lite MB290SP-B certainly doesn't disappoint..Effortlessly transform bay drives to accommodate HDDs or SSDs, with the drive bay adapter.Takes minimal energy and effort to get installed internally.Number of 2.5" Bays: 2.My Image Garden: Software which lets you access, organize and personalize your favorite photos and documents.

The FLEX-FIT Trio MB343SP is a very unique 3.5" to 5.25" front bay adapter. At first glance is of what looks like a simple 3.5" to 5.25 device bay adapter, but there is more than meets the eye. We've created a device that utilizes a single 5.25" bay and converts it into 2 x 2.5" HDD/SSD slots and a 3.5" device or hard drive bay designed for tool-less drive installation. The FLEX-FIT Trio MB343SP pushes the envelope with its unique features and brilliant engineering. As a result, you get a beautifully crafted adapter that is sturdy, flexible and multifunctional..Number of Total Expansion Bays: 3.Number of 3.5" Bays: 1.Number of 2.5" Bays: 2

M.2 SSD Enclosure for M.2 SATA Drives - USB 3.1 G - USB-C - Portable M.2 External Enclosure (SM21BMU31CI3).Broad compatibility with the most common M.2 SATA SSDs (B Key / B+M Key) in various lengths (42, 60, 80 mm).Compact solid aluminum design (4x2x1.5” / 11x5x1.4 cm) with ventilation and attached braided cable.Not compatible with M.2 NVMe or AHCI PCI Express SSDs.Turn your SATA M.2 SSD into external storage for your USB-C laptop, tablet or desktop computer.Ultra-fast USB 3.1 Gen 2 data connection for M.2 SATA drives.Portable M.2 SATA to USB Adapter | Attached USB-C Cable

Icy Dock is proud to introduce the MB082SP, the newest product in the incredibly popular SSD/HDD bracket converter line. Easy installation and Durability is the key to this product, perfect for users that require the best physical protection of their data, with the least amount of hassle of installation..Drive Interface: IDE, Serial ATA.Number of Total Expansion Bays: 2.Number of 2.5" Bays: 2.Windows 10 features the new Edge browser, which gives you a much larger viewing area for enjoying your online content at its best. You can write notes directly onto web pages and share them with anyone - perfect for home users or professionals.

Expand your storage capabilities with the StarTech M.2 USB 3.2 External SATA Hard Drive Enclosure. Designed for high-speed data transfer, this enclosure supports both PCIe NVMe and SATA M.2 SSDs, offering universal compatibility. The USB 3.2 Gen 2 (10Gbps) connection ensures rapid performance, while the tool-free installation allows for quick and hassle-free setup. Encased in durable aluminum, it provides efficient heat dissipation to protect your SSD. Compact and portable, this enclosure is an ideal solution for on-the-go professionals and tech enthusiasts seeking a reliable external storage upgrade..Compatible w/PCIe M.2 NVMe, SATA AHCI M.2 SSDs.USB 3.2 Gen 2 10Gbps; UASP support; PCI Express 3.0 w/4.0 compatibility.For PCIe (M-Key), SATA (B+M-Key) drives sized 2230/2242/2260/2280; Not compatible with 22110mm.USB Type-C, USB Type-A cables; Tool-less drive installation; Works with Windows, Mac, Chrome, Linux, Ubuntu, iOS (iPhone 15 [Plus/Pro/Max] and up).Portable M2 NGFF SSD Case Adapter with aluminum housing protects SSD and provides heat dissipation

This slim, pocket-sized drive enclosure is specifically engineered for 7mm drives, giving you the option to turn your thin hard drive or solid state drive into an external storage solution connected through UASP-enabled USB 3.0. With a thin yet durable design, the enclosure fits your 7mm drives perfectly to eliminate any drive movement inside the enclosure, which could be a problem with a looser-fitting enclosure. To help save you time transferring data to and from your 7mm SSD or HDD, this UASP-enabled enclosure supports transfer speeds up to 70% faster than traditional USB 3.0, when used with a UASP-enabled host computer. Plus, the enclosure is USB-powered, so you don’t have to carry a power adapter with you, giving you one less thing to pack when you’re travelling. To ensure compatibility with your computer system, the S2510BPU337 supports all of the leading operating systems, including: Microsoft Windows® (8/7/Vista/XP/Server 2008/Server 2003), Apple® OSX (10.9/10.8/10.7/10.6), Linux, and Google Chrome OS™..Compatible with 2.5" SATA III SSD and HDD drives up to 2TB.Enclosure connects to your computer via USB 3.0.USB powered, no external power adapter required.Compatibility: Mac, PC.Material: Plastic.Color: Black.Weight: 0.08 lbs..Warranty: 3 Years.Turn a 7mm high 2.5in SATA III SSD/HDD into a UASP-supported USB 3.0 External Drive

Experience blistering fast data transfer speeds while expanding your storage with the Hyper M.2 x16 Gen5 Card from ASUS. With four M.2 2242/2260/2280/22110 slots with Q-Latch, you can install separately purchased PCIe 5.0 x4 NVMe SSDs. Then, installing this card into an available PCIe 5.0 x16 slot allows you to transfer up to 512 Gb/s with compatible Intel or AMD motherboards and processors..Type of Processor Compatibility, Motherboard & Accessory Type & Use: PCI Express 5.0 x16.System Speed: support data transfer rates up to 512 Gbps.Graphics Output: PCIe 5.0 x16 interface.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

The StarTech.com ® black USB 3.0 universal docking station offers hassle free connection for IDE and a SATA 2.5"/3.5" hard drive or solid-state drive. It incorporates JMicron - JMS561U, JMD330 chipset reliable performance. This universal docking station supports one 40-pin IDE connector, one 4-pin LP4 male connector, one 7+15-pin SATA data and power combo receptacle. With plug-and-play and hot-swap features, it allows installing/removing the converter unit without any risk..Input voltage: 110 - 240 VAC, Output voltage: 12 VDC, Input current: 2.2 A, Output current: 16.6 A, Plug type: M, Center tip polarity: Positive.Has plastic construction for durability.Form factor: External, Chipset ID: JMicron - JMS561U, JMD330.Comes in black color.Dimensions: 2.8"(H) x 5.1"(W) x 5.8"(D).Operating temperature: 5 - 80 deg C, Storage temperature: -40 - 70 deg C, Humidity: 8 - 90 percent RH.Provides optimal performance with support for SATA III & UASP and provides hassle-free operation with upright slot-loading SATA, IDE drive bays.Features compact, desktop-style form factor and patented drive ejection mechanism for SATA drives.Includes hard drive dock, USB 3.0 cable, IDE 40 to 40-pin cable, LP4 power cable, 40-pin + LP4 to 44-pin IDE cable, power adapter and manual.Weight: 18.1 oz..Comes with 2 years warranty.StarTech.com UNIDOCKU33 universal external features a patented drive ejection mechanism for SATA drives.