Steel Cable Management Trays

This Cable Management Tray enables you to have a tidier desk while keeping your cables and power bars off the floor, avoiding wire tangles and trip hazards. With an area of 23.6"L x 4.5"D x 3"H (60cm x 11.4cm x 7.6cm), this cable manager offers enough room to keep all your cords in one place. It supports laptop adapters, power bars, video/printer/charge cables, and it is compatible with height adjustable standing desks..Keep loose cords in order with these cable management tray.Comes in black and made of steel.76cm length for convenient use.Meets or exceeds RoHS standard

StarTech.com® 2U Horizontal finger duct rack cable management panel in black color mounts to a standard 19" 2 or 4-post rack to organize horizontal cabling, through a covered cable duct. Features a removable top cover that holds it easy to add or remove bundled cables quickly. Helps to increase the longevity of server and networking equipment interfaces by providing cable strain relief. Includes one horizontal cable duct, four M5x15 screws, M5 cage nuts, M6x15 screws and M6 cage nuts..Cable management panel is perfect to organize horizontal cabling, through a covered cable duct.Comes in black color for new look and is made of sturdy steel for durability.Measures 3.5"H x 19"W x 3.1"D.Features front mounting for easy installation.Utilizes 1U rack height for designating the usable space.Includes removable top cover that helps for easy adding or removal of bundled cables quickly.Provides a series of fingers on either side, as well as pass-through holes at the back to helps to route cables.Offers better solution for your server room or wiring closet.Used to mount standard 19" 2 or 4-post server racks.Use the fingers on either side or the rear pass - through holes to detache and route cables easily.Maximize the longevity of server and networking equipment interfaces by offering cable strain relief.Contains horizontal cable duct, 4 x M5x15 screws, 4 x M5 cage nuts, 4 - M6x15 screws, 4 x M6 cage nuts fro reliable operation.Meets RoHS Compliant and is CE listed.Weighs up to 33.7 oz.Comes with 2 years warranty.StarTech.com® 2U Horizontal finger duct rack cable management panel in black color is made of high-quality steel for durability. Comes with 2 sets of rack screws.

The Mount-It! cable management tray is the perfect solution to keep your workspace clean, organized, and free from messy cables. Its open design ensures proper ventilation, preventing overheating of power adapters and cords, while also allowing easy access when you need to adjust or swap out devices. This versatile cable organizer clamps securely to the back of most desks, including Mount-It! standing desks and other popular desk brands, with no tools or drilling required. Once installed, it seamlessly blends with your desk, maintaining a sleek and professional appearance. Cut-outs allow for easy cable routing and whether you're managing cords for a dual-monitor setup, docking station, or other electronics, this wire organizer is built to handle it all. Crafted from durable materials, it provides a sturdy solution for power strips, surge protectors, and cable bundles, making it an essential addition to any office or home workstation. Stay productive and enjoy a clutter-free desk with this reliable under-desk cable organizer..This under-desk cable management tray keeps cords, adapters, and power strips organized and out of sight, helping you maintain a clutter-free and efficient workspace..Made from durable steel and ABS in a sleek matte black finish for strength and long-lasting use..Measures 23.6" long, providing ample space for multiple cables, adapters, and surge protectors..The pack includes a single unit for individual use..Clamps securely to desks 0.2"–1.97" thick, compatible with the standing desks and most other popular brands..No tools or drilling required for installation, installs in seconds for effortless setup..Ideal for managing cables from monitors, docking stations, and other electronics in office or home environments..Supports up to 11 lbs, easily accommodating surge protectors and bundled cords..Sleek and minimal design blends seamlessly with modern workstations for a professional look..Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Supported by Manufacturer's Limited Lifetime Warranty..Keep your workspace neat and professional with the Mount-It! Cable Management Tray, an easy, tool-free solution for organizing cables and power strips under your desk.

The Mount-It! MI-7282 under-desk management system is manufactured to provide you with an easy-to-place, hang, and adjust platform for your wires. Featuring multiple cutouts along the edge and open ends for cable pass-through, your cords stay discreetly hidden but still easily accessible. You'll be able to store wires away without taking up additional room on your desktop. Hang on the crossbar of a sit-stand desk, or attach directly to your desktop where you need it. This tray makes optimal use of the space under your desk, giving you the freedom to place more important things around your workstation..Cable tray hides unwanted cables and cords under your desk.Made of a high-grade black steel.Dimensions: 2.9"H x 23.2"W x 4.2"D.Features multiple cutouts along the edge and open ends for cable pass-through.Installs within minutes: hang on the crossbar of a sit-stand desk, or attach directly to the desktop.Supported by manufacturer's limited lifetime warranty

Helps eliminate cable stress..Black.Dimensions: 1.77"(H) x 3.9"(W) x 19.13"(D).Helps eliminate cable stress.Organizes cables within SmartRack enclosure or open rack.Required mounting hardware included.Cold rolled steel with black finish.Compatibility: Tripp lite smartrack enclosure.Rack height: 1U.19" panel width.RoHS Compliant.Lifetime limited warranty

Organize network and power cables on a 19" rack or cabinet with this StarTech 1U horizontal cable lacing bar with variable depth. Organize cables and reduce cable and connector strain by mounting this lacing bar between rack-mounted patch panels, servers, and NAS devices. Tether cables to the cable management bar using cable ties or hook-and-loop fasteners to enhance the airflow to mission-critical equipment..Organize network and power cables on a 19" rack or cabinet with this 1U horizontal cable lacing bar with variable depth.Can be installed inwards or outwards relative to the rack mounting posts for optimal cable routing, reduced clutter, and improved airflow.Dimensions: 1.7"H x 19"W x 3.8"D.Box contains: lacing shelf, four M6 screws, four M6 cage nuts, four M6 plastic washers, four M4 screws, quick start guide.Horizontal cable lacing crossbar allows for variable depth of the horizontal bar relative to the rack mounting posts (depth adjustable from 1.5" to 3.7"; fixed side bracket depth of 3.78").Use with patch panels, servers, switches, NASs, PDUs, KVMs, and more.Eliminate sharp cable bends at connector ends and alleviate port/connector stress by securing the cables.Features lacing points spaced 0.3" along the cable guide bar.SPCC steel construction allows the cable support bar to bear the load of all cable/cable bundle types.Powder-coated black finish for long-term durability.2-year manufacturer limited warranty

The StarTech.com® 3' black vertical cable organizer with D-ring hooks, gives you a simple and space-efficient way to organize the cables in your server rack. Cable organizer measuring 36" x 2" x 3.4", promotes passive cooling in your rack by organizing cables to improve airflow. Cable manager uses D-ring method of cable management to run cables vertically along the side of your rack. It comes with vertical cable organizer, two 16 mm M4 screws, two M4 nuts, four 12 mm washers and one instruction manual..Vertical cable organizer helps to manage and protect cables in racks, cabinets and enclosures.Color: Black, Material: Steel.Length: 3'.Dimensions: 36"L x 2"W x 3.4"H.U height: 20U.0U design that doesn't take up any mounting space and with simple tool-less installation it's easy to attach or reposition as necessary.Vertical cable manager gives you a simple and space-efficient way to organize the cables in your server rack.Promote passive cooling in your rack by organizing cables to improve airflow.Improve the appearance of your rack using a vertical cable manager with D-ring hooks.Cable manager uses a D-ring method of cable management to run cables vertically along the side of your rack.Routing your cables through a panel reduces the tension that is often put on cables.Includes: Vertical cable organizer, two M4 x 16 mm screws, four M4 nuts, four 12mm washers, one instruction manual.RoHS compliant.Weight: 26.8 oz..Comes with 2 years warranty

Tripp Lite Cable manager comes with a finger duct and dual-hinge cover. Cable manager has the dimensions of 3.5" x 19" x 4.52" and weighs 2.7 lbs..Compatibility: Tripp lite smartrack enclosure or open rack.Material: Steel.Rack size: 2U.Black.Dimensions: 3 1/2"(H) x 19"(W) x 4.52"(D).Helps eliminate cable stress for your rack enclosure cabinet.Required mounting hardware is included.Panel width: 19".Cerftifications: RoHS.Weight: 2.7 lbs.Warranty: 5 years limited.Tripp Lite Cable manager helps to eliminate cable stress by organizing cables within smart rack enclosure or an open rack.

StarTech.com 1U Horizontal cable management panel has a removable top cover that allows the user to add and remove the bundled cables easily. Panel comes with a series of fingers and passes through holes required for routing cables..Cable management panel.Help you organize horizontal cabling, through a covered cable duct.Hardware: 1U height, mounting options: Front mount (front only).Physical characteristics: Black colored, enclosure type: Steel.Compatibility: Mounts to standard 19" 2 or 4-post server racks.Finger duct plus rear pass-through holes for routing cables.Add or remove bundled cables quickly, with a removable top cover.1U rack design, sturdy steel construction.Separate and route cables easily, using the fingers on either side or the rear pass-through holes.Increase the longevity of your server and networking equipment interfaces by providing cable strain relief.Organize cables in your server rack or cabinet with a horizontal, covered cable duct.Dimensions: 19"H x 1.9"W x 2.4"D.Includes: 1 x horizontal cable duct, 2 x M5x15 screws, 2 x M5 cage nuts, 2 x M6x15 screws, 2 x M6 cage nuts.Certifications and standards: EIA RS310-D, CE industry standards.Weight: 23.7 oz..Warranty: 2 years.StarTech.com 1U Horizontal cable management panel has a sturdy steel construction for enhanced durability and can be easily mounted on standard 19", 2 or 4 post server racks.