Storage Brackets

The 2U 14" deep wall mounting bracket for patch panels delivers a sturdy and dependable equipment storage option, allowing you to wall mount data/IT equipment for a more efficient and accessible operating environment. It's the perfect solution for areas where space is at a premium like SoHo (small office, home office) environment, or space limited server room because it doesn't take any floor space. The mounting bracket features an all-steel design and is suitable for mounting patch panels, or other slim 19in equipment to a wall, and to organize cabling or equipment in your network closet, wiring closet, back office, or IDF. The sturdy steel construction is especially helpful for durability and stability. Also, because The open frame wall rack's mounting holes are positioned 16in. apart, allowing you a simple and secure wall-stud anchoring to your existing construction framework. M6 square cage nuts and M6 screws are included with the wall-mount bracket, additionally, M5x25 mounting screws are included to save you the hassle of sourcing separate mounting hardware. The RACK-2U-14-BRACKET is backed by a StarTech.com lifetime warranty and free lifetime technical support..2U WALL MOUNT RACK: This 19-inch wide low profile wall mounted rack has a maximum mounting depth of 14 in (35 cm), recommended for networking equipment up to 12 in deep, leaving 2 in for cable routing; Maximum weight capacity of 77 lbs. (35 kg).EASY TO INSTALL: The 2U wall-mounting patch panel bracket ships fully assembled and comes complete with M6 screws and M6 square cage nuts for easier equipment installation & includes wall mounting hardware; Predrilled wall mounting holes spaced 16" apart.COLD-ROLLED STEEL CONSTRUCTION: The wall mounting rack features a 1/16 in (1.5 mm) thick solid steel design for ultimate durability and to ensure a safe and sturdy mounting solution.EASY CABLE MANAGEMENT: Built with efficiency in mind, the small wall mount patch panel bracket has rear cable opening slot for in-wall cable routing in your network closet, server room, wiring closet, classroom.Durable wall mount rack made of cold rolled steel.STARTECH.COM ADVANTAGE: IT professionals choice for over 30 years; This 2U wall mount rack backed for life by StarTech.com, including free 24/5 North America based multi-lingual tech support.Mount equipment that is up to 14 inches deep, such as patch panels or network switches, to your wall

The RACK-10U-14-BRACKET 10U 13.78 in. Deep Wall Mounting Bracket for Patch Panel delivers a sturdy and dependable equipment storage option, allowing you to wallmount equipment for a more efficient and accessible operating environment. The mounting bracket features an all-steel design and is suitable for mounting patch panels, or other slim 19in equipment to a wall..StarTech.com 10U Wall Mount Network Rack, 14 in Deep (Low Profile), 19" Patch Panel Bracket for Shallow Server.This 19 inch wide low profile wall mounted rack has a maximum mounting depth of 14 in [35 cm]..The 10U wall mounting patch panel bracket ships fully assembled and comes complete with M6 Screws and M6 Cage Nuts.The wall mounting data rack features a solid steel design for ultimate durability and to ensure a safe and sturdy mounting solution.Built with efficiency in mind, the small wall mount patch panel bracket has rear cable routing access for easy cable organization in your network closet, server room.Color come Black.Material Alloy Steel

The StarTech® WALLMOUNT8 wall-mounting bracket provides 8U of space for mounting shallow rack-mount equipment that is 12" deep. This accessory in black, is made of solid steel and offers hassle-free installation. It optimizes your working space by efficiently mounting your equipment on your wall instead of taking up desk space or other usable surface areas..Wall mounting bracket provides 8U of space for mounting shallow rack-mount equipment that's 12" deep or less to the wall.Dimensions: 14.3"H x 20.5"W x 13.7"D (product), 14.3"H x 20.5"W x 12"D (external), 13.5"H x 17.7"W (internal).Black steel.Frame type: Open frame.Rack type: 2-post.Maximum weight capacity: 80.2 lbs..Improve efficiency in your office or server room by mounting shallow equipment to the wall.Sturdy installation of mission critical equipment with solid steel design.Hassle-free setup with wall mounting holes spaced 16" apart, matching standard dry-wall framework.Rear access panel for cable management.Includes 1 x wall-mount bracket, 24 x M5 cage nuts, 24 x M5 screws with washers, 1 x M6 K-nut, 6 x wood screws, 1 x instruction manual.RoHS compliant.Weight: 17.8 lbs..Comes with lifetime warranty

2.5 SSD/HDD Mounting Bracket for 3.5 Drive Bay - 5 Pack - Tool-less - Hard Drive Mounting Kit (BRACKET125PTP).Compatible with most 2.5" SSD/HDD drives including: IDE, SAS, SATA, U.2 and more.Install one 2.5” SSD or HDD into a single 3.5” bay.Supports drives 7 mm or 9.5 mm in height.Tool-less drive and bay installation.2.5" Hard Drive Mount | Tool-less Installation

Startech® 1 Rack rackmount bracket is designed for simple installation and maximum server/KVM rack space-efficiency. Bracket includes a cable support bracket that reduces stress on KVM cables and switch connectors..Color: Black.Rack-mount brackets include a cable support bracket that reduces stress on KVM cables and switch connectors.Compatibility: SV431H KVM switch, SV431D KVM switch.Easy to install.Saves space by rackmounting equipment.2 years limited warranty.Startech® 1 Rack rackmount bracket offer a space-saving solution for our SV431/SV431D rack mount KVM switches.

This StarTech.com equipment rack bracket lets you attach your 3U rack mount equipment to a wall so that you don't have to worry about storing it in your server racks. It can hold a total of 125.3 pounds thanks to its two-post construction, and it comes with all the screws you need for easy installation..Dimensions: 5.9inch(H) x 19.8inch(W) x 5.9inch(D).Weight capacity: 125.3 lbs..Arrives fully assembled with cage screws and nuts for mounting equipment into the rack.Equipment can be vertically wall mounted, or horizontally under a desk.Compatible with most 19inch rack mountable equipmen.Rack type: 2 post.U height: 3U.Frame type: Open frame.Front door type: Open.Wall mountable.Industry standards: EIA RS310-C.Compatibility: Network device, power strip, patch panel.Package contents: Vertical wall mount bracket, cage nuts and screws, self tapping wood screws - 3/16inch x 1 1/2inch.Weight: 33.2 oz.Warranty: Lifetime limited.StarTech.com Equipment Rack Bracket - Attach Your 3U Equipment with Ease

The RKLCDBK Universal VESA LCD Monitor Mounting Bracket for 19in Rack or Cabinet lets you mount almost any retail LCD or Touch screen panel into a server/storage rack/cabinet..Size: 7"(H) x 17" - 19 1/2"(W) x 4.2"(D).Color: Black.Adjustable 100 mm and 75 mm VESA mounting hole pattern for greater compatibility and control.Adjustable depth between 0 to 3.5 inches at an increment of .25 of an inch.Constructed from solid steel at 2.0 mm thick, this bracket is designed for durability.Ideal for installing a retail LCD monitor into an existing Rack or Cabinet solution.Use for uptime/process monitoring with big screens over 19" when mounted outwards.Material: Steel.Installing a touch screen display into a rack or cabinet.Mounting an LCD monitor or TV to the wall.Includes: 1 x LCD mounting bracket (two sides, one back), 1 x pack assembly screws (4 ea truss head, washers, flat head), 8 x LCD mounting Screws.Certifiations and standards: ANSI/EIA RS 310 D standards.Weight: 3.8 lbs..Warranty: Lifetime limited.Universal VESA LCD monitor mounting bracket for 19" rack or cabinet is constructed from solid steel at 2 mm thick and is designed for durability.

5U Vertical Wall Mount Rack - 19in Low Profile Open Wall Mounting Bracket - Network/Server Room/Data/AV/IT/Patch Panel/Communication/Computer Equipment - w/ Cage Nuts/Screws (RK519WALLV).INDUSTRY-LEADING SUPPORT: StarTech.com offers lifetime product protection and free lifetime technical support on this wall mount patch panel bracket, and has been the choice of IT professionals and businesses for over 30 years.NO ASSEMBLY REQUIRED: The open frame, L-shaped rack kit arrives fully assembled with cage screws for mounting equipment and 1 ½” screws for mounting the rack to wood surfaces; it’s a convenient solution for all your small/home office needs.STANDARDIZED HOLE SIZING: The wall mounting holes on the 5U vertical mountable rack bracket are 16” center to center to provide greater stability and match standard wall studs; it works with most 19” rack mountable equipment for ultimate compatibility..STURDY DESIGN: Constructed to EIA-310 19 inch data rack standards, the wall mount patch panel bracket features durable solid steel construction supporting up to 200 lb. (90 kg) while ensuring equipment is mounted safely out of the way.VERSATILE FUNCTIONALITY: This TAA compliant multi-use low profile 5U vertical rack mount bracket enables servers, networking switches, patch panels or AV equipment to be mounted vertically for easy equipment access where a full rack is not desirable.Mount server, network or telecommunications devices vertically with this 5U wall-mountable rack

StarTech 2.5in SATA Hard Drive to 3.5in Drive Bay Mounting Kit.Hard drive accessory type: SATA.Drive connectors: 1 x SATA data and power combo (7 + 15 pin) receptacle.Host connectors: 1 x LP4 (4 pin - Molex large drive power) male, 1 x SATA (7 pin - data) receptacle.2 1/2" SATA hard drive in a 3 1/2" drive bay.A metal mounting bracket ensures the drive is reliably secure and provides heat dissipation from the drive.Features a sturdy aluminum bracket as well as a combined SATA cable which helps simplify installation and reduce clutter within the computer case.Device supported: Hard disk drive.Compatibility: PC.Green compliance certificate/authority: RoHS.Material: Aluminum.Package contents: 3 1/2" mounting bracket, data/power adapter cable, screw kit.2 years warranty.Bay provided: 1 x 2 1/2" internal, bay required: 1 x 3 1/2" internal.StarTech.com Drive Bay Mounting Kit - Secure Your Internal Hard Drive

The StarTech professional PC wall mount bracket is designed to meet the needs of IT professionals seeking a space-saving and convenient solution for their workstation setups. The supported desktop towers widths are between 1.9" to 7.8" (50 to 200 mm). This heavy-duty wall mount system is constructed of 0.09" (2.5mm) thick powder-coated SPCC steel sheets, ensuring durability and strength. With a weight capacity of up to 39.6 lbs. (18kg), it provides a secure mount for desktop computers. Experience effortless installation with the keyhole mounting to speed up deployment..Heavy-duty desktop computer wall mount bracket featuring adjustable widths, toolless adjustment, and intuitive keyhole mounting.Supports desktop computers up to 40 lbs..Toolless adjustment from 1.9 to 7.8" (50 to 200mm) of the CPU holder to accommodate various computer sizes/UPS battery backups.Constructed of thick powder-coated steel in black.Quickly adjust the width of the PC wall mount bracket by using the hand knobs.Weight is 5.7 lbs..Dimensions: 7.3"H x 9.4"W x 8.7"D.Protective rubber spacers prevent damaging the CPU chassis while holding it stable and secure in the bracket.Included self-adhesive rubber and foam spacers protect the chassis from scratches and prevent the equipment from sliding off.For very slim CPU cases, use the included plastic spacers to meet the required width for your device.This robust computer wall mount system allows you to free space from your work desk or floor by mounting the workstation tower onto a nearby wall (concrete/wooden stud).Alternatively, mount the computer shelf to the side of a desk.Easily access the drive bays, peripheral ports and wiring when mounted on the bracket.Quickly install the PC holder using the keyhole mounting (all required hardware is included in the package).Package includes: wall mount bracket, sliding bracket, two plastic spacers, two rubber self-adhesive strips, eight rubber self-adhesive spacers, four rubber self-adhesive pads, two wall mounting screws, two concrete wall anchors, two hand knobs, and user manual.5-year manufacturer limited warranty

Save space and neatly mount your docking station or thin client or USB hub to a VESA mount behind your monitor or under your desk - Thin Client Mount with 75x75 and 100x100 VESA mount compatibility - Ideal for holding an Intel NUC or Mac Mini - Supports up to 11 lb. (5 kg) - Adjustable width (0.7" to 2.8" / 17 mm to 70 mm) - Mac Mini Mount / Under Desk Computer Mount / Under Desk CPU Mount / Under Desk PC Mount / Computer Mount / CPU Mount / Mac Mini VESA Mount / Mini PC VESA Mount.Save space and reduce cable clutter by mounting your thin-client PC or docking station to the back of your monitor, clamped to a monitor-mount pole, or under your desk.Supports up to 11 lb. (5 kg).Adjustable width from .7" to 2.8" (17 mm to 70 mm).75x75 and 100x100 VESA mount compatibility.Rubber pads to prevent damage to your device.Easily access your computer with the open-frame design.Save space and neatly mount your docking station, thin client or USB hub to a VESA mount, behind your monitor, or under your desk

StarTech 2.5" to 3.5" SATA Hard Drive Adapter Enclosure.Hard drive accessory type: SATA hard drive adapter enclosure.Dimensions: 1.4"(H) x 4"(W) x 5.7"(L).Interfaces: Drive connector: SATA/600.Support for SATA revision I/II/III (1.5/3/6 Gbps), tool less installation, supports 2.5" SSD/HDD up to 12.5 mm in height, standard 3.5" HDD mounting points, material: Aluminum, plastic.Drive connectors: 1 x SATA data and power combo (7+15-pin), host connectors: 1 x SATA data and power combo (7+15-pin).Data transfer rate: 6 Gbps SATA III.Max drive capacity: Currently tested with up to 1TB 7200 RPM hard drives.Operating temperature: 5 - 55 deg C, humidity: 5 - 85%RH.Drive size: 2 1/2", drive installation: Removable.Supports 2 1/2" SSD/HDD up to 12.5 mm in height, SATA revision I/II/III (1.5/3.0/6.0 Gbps).Improve the performance speed of any 3 1/2" hard drive application by adapting a 2 1/2" solid state drive.Tool less installation.I/O expansions: Number of total expansion bays: 1, number of 2 1/2" bays: 1.Includes 1 x 2 1/2" to 3 1/2" SATA HDD/SSD enclosure, 1 x screw kit, 1 x install guide.Weight: 9.2 oz..Warranty: 2 years limited.Startech.com® 2 1/2" to 3 1/2" SATA hard drive adapter enclosure has internal form factor and includes serial ATA/600 drive interface.

This shelf is constructed using SPCC commercial grade cold-rolled steel. It is a durable fixed rack shelf that can hold up to 22kg of equipment and is a perfect solution for storing small, non-rackmount equipment, and tools..Dimensions 3 1 2"(H) x 19"(W) x 16"(L).Weight capacity 50 lbs..Frame type Steel.Black.Mounting options Front mount (front only).Supply additional storage space for mission critical hardware and non-rack mount equipment.Material Steel.Vented server rack shelf improves airflow and helps lower temperatures in the cabinet.Universal 19" rack design makes it simple to add a storage shelf to almost any rack or cabinet.Durable steel construction holds up to even the harshest industrial environments.Enclosure thickness 0.1".Rack unit 2U height.Includes 2U fixed rack shelf, 4 x M6 screws, 4 x M6 cage nuts, instruction manual.Certifications and standards CE, RoHs.Warranty Lifetime limited.Silver.Startech.Com® CABSHELF Universal Vented Rack Mount Cantilever Shelf improves airflow and helps lower temperatures in the cabinet.

Save space while improving the appearance of your work area, with this low-profile TV wall mount. The mount sits close to the wall to support a VESA Mount compliant TV from 37" to 70", and offers anti-theft protection as well as titling capability that makes it easy to find the perfect viewing position. Low-profile design for meeting areas or digital signage Mount your flat-screen TV or monitor in a location that's convenient for visitors, clients or employees. The wall mount safely and securely supports your TV about two inches (51 mm) from the wall to provide a sleek, low-profile look..Device Supported: TV.Maximum Load Capacity: 88 lb.Number of Displays Supported: 1

StarTech.com® Fixed server rack cabinet shelf can withstand up to 175 lb of weight capacity and has an adjustable mounting depth of 19" -38". Shelf features rugged steel construction for durability in harsh environments..Capacity: 80 kg.Dimensions: 1.6"(H) x 17 1/2"(W) x 27.6"(D).Adjustable mounting depth of 19" - 38".Low cost adjustable shelf for most 19 inch wide cabinets and racks.Weight capacity up to 175 lbs..Vented shelf plate to preserve airflow.Lifetime limited warranty.StarTech.com® Fixed server rack cabinet shelf measuring 1.6" x 17 1/2" x 27.6" is adjustable for most 19" wide cabinets and withstands 250 lb of weight capacity.

The StarTech® WALLSHELF4U wall-mount server rack in black, comes with built-in-shelf for easy customization. It provides 4U of space for mounting your servers or A/V equipment to a wall. This solid steel accessory has 10 - 32 tapped rails for hassle-free setup..Wall-mount server rack with shelf provides 4U of space for mounting your servers or A/V equipment to a wall.Dimensions: 10 1/2"H x 19"W x 18"D.Black steel.Frame type: Open frame.Rack type: 2-post.Maximum weight capacity: 75.2 lbs..Customize your setup with a built-in shelf that can be positioned at either the top or the bottom of the rack.Save space in your office or server room by mounting IT or AV equipment to the wall.Hassle-free setup with 10-32 tapped rails, enabling you to mount your equipment directly to the rail without cage nuts.Tie-off points for cable management.Rear opening for cable access.Includes 1 x back plate, 1 x right bracket, 1 x left bracket, 1 x shelf bracket, 2 x adjustable rails, 16 x 10-32 x 3/8 screws, 12 x 10-32 screws.RoHS compliant.Comes with lifetime warranty