Tablet Mounts for Vehicles

Mount-It! MI-526 is a heavy duty large vehicle mount to meet all of your mobile office needs. Your car will have an adjustable ergonomic work station that fits laptops and tablets. With proper mounting, your mount will not sag or bounce in motion. The sturdy aluminum steel alloys keep your device firmly attached to the tray. The locking knobs can be tightened to support your device with ease..Vehicle Laptop Mount for 12"-15.4" Laptops.Full motion, rotating, adjustable, and tilting capabilities.Vented USB cooling fan.Sturdy aluminum arms are capable of supporting most laptops and tablets with ease.Max Load Capacity 9 lbs..Supported by manufacturer's limited lifetime warranty

The MI-7311 car seat headrest mount was designed to be an adjustable, rear-facing tablet holder that allows your car passengers to view or use any 7" to 11" tablets conveniently from the backseat of the car. No special tools necessary - the headrest mount can be easily attached and removed from a car's front seat headrest post. The ultra lightweight carbon fiber arm has an adjustable ball and socket system at both ends that all you a wide range of movement for the perfect viewing position - height adjustable for an adult or child passenger..Universal Headrest Tablet Mount for 7"-11" Tablets.Carbon fiber arm allows up to 12.5" of height adjustment.Easy locking knobs at each joint ensure a strong and stable grip.360 degree ball and socket system.Supports up to 3.3 lbs..Supported by manufacturer's limited lifetime warranty

The Panasonic Gamber-Johnson Lite tablet vehicle dock is designed to be used with the Panasonic TOUGHBOOK 33..Compatible with Panasonic TOUGHBOOK 33.Features 6 x USB Type-A (powered, two front), 2 x Ethernet, 1 x serial ports, dual RF, antenna switch.Comes in black color.Weight: 4.2 lbs..Overall dimensions: 12.5"H x 13.3"W x 4.5"D.Features dual pass-through.Compatible with tablets that have either a long life battery or rotating hand strap.Not compatible with tablets that have a premium keyboard, quick-release SSD, or long-life batteries when combined with a rotating hand strap.Easy one-handed docking release.VESA 75 mounting pattern, keyed alike.3-year manufacturer limited warranty

The MI-7320 is the ideal ELD table mount solution for any commercial truck or fleet. This universal tablet car mount allows you to easily access your tablet in your vehicle. The double-jointed extension arm can be adjusted and fixed at any angle for ease of use. The easy locking knobs ensure your tablet stays in place and doesn't drift, sway, or sag. All necessary hardware and installation instructions included..Universal Car Tablet Mount for 7"-11" Tablets.Place it as a passenger seat GPS guide, a rear seat entertainment center, or a tool for work.Easy locking knobs at each joint ensure a strong and stable grip.360 degree ball and socket system;180 degree swivel.Supports up to 3.3 lbs..The tray adjusts from a compact 5.12" x 7.68" to a spacious 7.87" x 10.98" to accommodate different devices or accessories..The sturdy base expands from 2.75" to 3.5" to fit a variety of desk thicknesses securely..The adjustable arm extends up to 18 inches, offering flexible positioning for maximum comfort and reach..Features dual 180° and dual 360° swivel joints, allowing smooth, customizable movement and positioning..Supported by manufacturer's limited lifetime warranty.Make Every Drive Productive: Mount-It! Car Cup-Holder Tablet Mount (MI-7320)

This Arkon® ultra sticky suction windshield car mount features adhesive base that provides a maximum bond on flat and smooth surfaces. Adjustable mount arm is rotated 360 deg vertically. Perfect place to hold smartphones and midsize tablets up to 8" screen size. Compatible with Samsung® Galaxy Note®, Galaxy Note® II, iPad mini™, iPhone® 5, Galaxy Tab® 7, Nexus® 7 and many more..Compatible with Smartphones.Comes in new black color.Has Slim-Grip® Ultra™ universal holder for added convenience.Contains sticky polyurethane suction pedestal for windshield or dashboard mounting.Suitable for use with large smartphones, even when they have a protective case or skin.Compatible for use with large devices such as Samsung® Galaxy Note®, Galaxy Note® II, iPad mini™, iPhone® 5, Galaxy Tab® 7, Nexus® 7 and many more.Comes with a limited warranty of 2 years.This Arkon® Slim-Grip® ultra sticky suction windshield car mount is a perfect place to keep smartphones & also those with protective cases. Has Slim-Grip® Ultra™ universal holder.

Our universal vehicle laptop mount is your ultimate solution to on-the-go productivity and convenience. Crafted with versatility in mind, its adjustable base seamlessly adapts to most vehicle types, including cars and trucks, ensuring universal compatibility. Engineered from high-quality, professional-grade materials, its sturdy design guarantees stability even when you're on the move. Effortlessly mounting to the passenger seat, this vehicle tablet mount offers optional bolting for added security, giving you peace of mind while you focus on the road ahead. The height-adjustable pole enables personalized device positioning, maximizing your comfort and usability at all times. Compatible with laptops up to 17" screen size or most tablets on the market, this mount comes with extendable grips that securely hold your device in place. Plus, with a built-in cooling feature, overheating becomes a thing of the past, ensuring your device stays cool and efficient at all times. Experience the ultimate in-car workspace!.This is a universal vehicle laptop mount designed for use in commercial vehicles, providing a mobile workstation for professionals on the go..Made from high-quality materials, the sturdy, professional design ensures stability on the move.Height-adjustable pole from 10.6" - 18.4", allows for personalized device positioning.Adjustable base works with most vehicles types to ensure universal compatibility.Easily mounts to the passenger seat; optional bolting for added security.Supports laptops with screen sizes up to 17" and is also compatible with most tablets..Extendable grips safely secure your device and the cooling tray feature helps prevent overheating.Supported by Manufacturer's Limited Lifetime Warranty.A Mount That Helps You Stay Productive on the Go. Turn your car into a mobile office with this secure, adjustable laptop mount. This sturdy vehicle mount keeps your laptop in place, so you can stay efficient anywhere.

The Mount-It! MI-7321 carbon fiber cup holder vehicle tablet mount is compatible with tablets from 7" - 11" and is an essential Electronic Logging Device (ELD) compliance solution for any commercial truck or fleet. With a long double-jointed adjustable extension arm, it is great for using an iPad ELD or tablet GPS and fixes it at any angle. The heavy-duty carbon fiber arm securely holds your tablet while you are on the road. The easy locking knobs at each joint ensure a strong, stable grip, so your tablet won't drift, sway, or sag..Cup holder car tablet mount.Compatible with tablets from 7" to 11".Made of carbon fiber and comes in black.Adjustable extension arm helps fix your tablet at any angle.Easy-locking knobs ensure a strong, stable grip.Rotate with ease between landscape and portrait.Essential Electronic Logging Device (ELD) compliance solution for any commercial truck or fleet.Max tray size: 7.87" x 10.98"; min tray size: 5.12" x 7.68".Arm extension length: up to 18"; height adjustability: up to 11.5".Proudly designed, quality-controlled, and supported in the U.S. by a small business delivering trusted solutions since 2006..Supported by Manufacturer's Limited Lifetime Warranty..Secure your tablet on the road with this adjustable ELD-compliant vehicle mount!

The Gamber-Johnson® 7160-0487-00-P vehicle docking station for FZ-G1 tablet computer is lightweight, tough and durable. This vehicle docking station does not include power supply and fits unique in-vehicle requirements. The USB 3.0 port and power in used for external connection. The docking station is alike key lock, which does not pass through any other system..Vehicle docking station help to maximize computing and communication while on the go or in remote locations.Dimensions: 9.14"H x 11.22"W x 3.8"D.Compatible with Toughpad FZ-G1 tablet computer.Black steel construction and composite design for reduced overall weight.Locking type: Push, button key lock, to release docking connector, locks are keyed alike.Designed using MIL-STD-810G test procedures.Docking station design accommodates extended battery, smart card reader, rear hand strap and bumper guards.Alignment tabs prevent damage to the docking connector when docking the computer.Docking station can be mounted either vertically or horizontally.Docking station can be mounted using the VESA 75 mm hole pattern.Rugged construction for long-term durability.Port replicator: Fully powered USB 3.0 (2) - 9 pin, Ethernet - RJ45, serial (1) D-sub - 9 pin, VGA - D-sub 15 pin, HDMI - 19 pin.Weight: 2.5 lbs..Comes with 3 year limited warranty

Transform your vehicle into a mobile workstation with the Intermec VMHOLDER3K Vehicle Mount Kit, specifically designed for secure mounting of bar code scanners and tablets. This professional-grade mounting solution ensures your devices stay firmly in place while maintaining easy accessibility for maximum efficiency in mobile operations..Vehicle mount accessory that securely holds devices during transport or field operations, ensuring stability and easy access..Compatible with select Honeywell devices, including barcode scanners and tablets such as those in the Granit XP and RT10 series..Engineered for professional vehicle integration.Durable construction for long-term reliability.Optimized for mobile workforce efficiency

Honeywell VM1001VMCRADLE Docking cradle is compatible with VM1 and VM2 Thor vehicle-mount mobile computers. It incorporates wire connecting technology and has charging capability. Cradle measures 4.5" x 8.3" x 10" and comes with 10 - 60 VDC integral power supply..Smart docking cradle.Compatible with Honeywell Thor vehicle-mount computers: VM1, VM2.Power: 10 - 60 VDC nominal voltage.Includes DC power cable.Capable of charging the devices.Honeywell Docking cradle is suitable for use with VM1 and VM2 Thor vehicle-mount computers. Cradle comes with DC power cable.

The Honeywell® VM1001BRKTKIT RAM mount kit has 5" short arm, round base and D ball for vehicle dock rear side mounting. This kit includes hardware for mounting the Thor VM1001VMCRADLE smart dock and Marathon FX1005VMDOCK vehicle dock..RAM mount kit.Compatible with Thor VM1001VMCRADLE smart dock, Marathon FX1005VMDOCK vehicle dock.Sold individually

The Gamber-Johnson 7160-0487-02-P vehicle docking station in black, is compatible with Panasonic FZ-G1 tablet computer. It features dual pass-through, keyed alike lock for a perfect fit. This lightweight, tough and durable docking station fits your unique in-vehicle requirements..Black steel construction.Dimensions: 9.89"H x 11.22"W x 3.8"D.Locking type: Push, button ley lock, to release docking connector.Ports: 2 x full powered USB 3.0 (9-pin), dual antenna pass-through (TNC), Ethernet (RJ45), serial/D-sub (9-pin), VGA/D-sub (15-pin), HDMI (19-pin).Compatible with Panasonic FZ-G1 toughpads, docking station can be mounted either vertically or horizontally.Accommodates extended battery, smart card reader, rear hand strap and bumper guards.Can be mounted using the VESA 75mm hole pattern.Alignment tabs prevent damage to the docking connector when docking the computer.Steel and composite design for reduced overall weight.Rugged construction for long-term durability.Meets RoHS, CE, FCC, TUV, C-Tick, Toughbook standards.Weight: 2.5 lbs..Comes with 3 year limited warranty

The Joy Factory MagConnect HD universal adhesive HD-mount (26mm) is built to withstand high vibration environments. The mount's base attaches to a dashboard with either the industrial grade 3M VHB adhesive or four screws. This semi-permanent application is great for virtually any vehicle dashboard and is flexible to accommodate slightly curved surfaces. It features MagConnect magnetic technology which allows the user to seamlessly detach and attach any MagConnect compatible case to the HD-mount. For workers in utility and energy, transportation and government, the Universal Adhesive Mount offers a low footprint solution for mobile workstations. Users can easily position a tablet or smartphone to allow them to be handsfree while on the go. The mount's spherical rubber ball joints provide stability and allow the user to position the device at their optimal viewing and operating angle..This universal adhesive HD mount (1.02") is built to withstand high-vibration environments.Compatible with all cases and enclosures with MagConnect compatibility.Semipermanent installation onto any flat or near-flat surface.Made of aluminum alloy in black.Product weight: 1.09 lbs..Arm length: 5.25".Dimensions: 8.8"H x 3.9"W x 3.9"D.Base attaches via industrial-grade 3M VHB adhesive or screws (not included).Certified vibration- and shock-resistant (MIL-STD-810G 514.7).Built with two 1.02" spherical rubber-coated ball joints to provide maximum holding strength.Made with corrosion-resistant material, making it perfect for mixed-element environments.Features cable management, 360-degree rotation, shock and vibration resistance, and near-infinite adjustability.Mount features two 1.02" ball joints for increased hold capacity.Optional locking lever for use in public spaces

Heavy Duty Seat Bolt mount for trucks and commercial vehicles with dual extension arm For an increasingly mobile workforce, a MagConnect Heavy Duty Seat Bolt Mount for iPad or tablets will keep your device in the best position for easy access in your vehicle. This Heavy Duty Seat Bolt Mount for iPad or Microsoft Surface attaches easily to your vehicle's existing hardware and is compatible with a wide range of car, truck, van, first responders vehicles makes and models. It is compatible with a wide range of cases that supports MagConnect. Adjusts to your preferred position, and folds away when not in use. For those who use mobile apps to navigate their on-the-go job, a MagConnect HD Seat Bolt mount for iPad or tablet from The Joy Factory is the best tool to keep your tablet device in view and keep you connected while on the road or in the field. Mount attaches to passenger seat; it is compatible with a wide range of makes and models Dual telescopic extension arms Compatible with all MagConnect cases Magnetic connection for quick mounting and dismounting Mount built-in lightweight aluminum alloy Highly flexible joints allow up to 360º rotation Built for commercial use.Built for commercial use.Magnetic connection for quick mounting and dismounting.Mount built-in lightweight aluminum alloy.Highly flexible joints allow up to 360º rotation

The Zebra CRD-ET6X-VEHDK-CON-0 is a rugged vehicle dock designed specifically for ET6x Series tablets, delivering secure mounting and reliable power in demanding mobile environments. Featuring dual USB ports and an RS-232 serial connection, it supports seamless peripheral integration. Its heated pogo pins ensure consistent connectivity, even in harsh conditions, while the VESA mounting pattern offers flexible installation options. Built to withstand shock, vibration, and weather exposure, this dock is ideal for fleet, field service, and warehouse applications..Rugged vehicle dock for secure tablet mounting and power in mobile environments.Compatible with Zebra ET6x Series rugged tablets.Wired connectivity technology is highly feasible, offers maximum usability.2 USB ports offers a more refined structure and safer to use connectivity

The Joy Factory MagConnect HD AMPs (26mm) HD-mount is a multifaceted mounting solution that can be used to position a tablet in virtually any emergency response vehicle. The mount features a robust drill down universal AMPs base that easily attaches to solid surfaces. This vibration dampening mount is ideal for on-the-go users as the tablet magnetically mounts and dismounts. The body of the mount features cable management and a robust, corrosion-resistant mount arm that can be adjusted to reach the optimum viewing and operating angle. It features two rubber coated ball joints which provide vibration and shock reduction. To keep the device in place the robust arm and rubber coated ball joints provide an increased holding strength. The body of the mount has a slim profile to allow it to fit in tight spaces and features a lever which modifies the force put onto its joints. For public environments that require theft prevention, an optional security feature is available..This AMPs (1.02") HD mount is a multifaceted mounting solution that can be used to position a tablet in virtually any emergency response vehicle.Compatible with all cases and enclosures with MagConnect compatibility.Drill-down base has an AMPs 30 x 38mm pattern for universal compatibility.Made of aluminum alloy in black.Product weight: 1.06 lbs..Arm length: 5.25".Dimensions: 8.8"H x 2.6"W x 2.6"D.Certified vibration- and shock-resistant (MIL-STD-810G 514.7).Built with two 1.02" spherical rubber-coated ball joints to provide maximum holding strength.Made with corrosion-resistant material, making it perfect for mixed-element environments.Features cable management, 360-degree rotation, shock and vibration resistance, and near-infinite adjustability.Mount features two 1.02" ball joints for increased hold capacity.Optional locking lever for use in public spaces

This MagConnect Forklift tablet mount can be used in virtually any material handling use case. Position the forklift mount on a square/flat or round surface up to 3" thick and wide. From tracking and scanning inventory to inbound and outbound logistics the mount can be attached to a forklift, cart, storage shelf or pallet jack. Each MagConnect mount features our quick connect technology which magnetically attaches a compatible case to the mount. The mount features a carbon fiber arm making it both lightweight and durable. Two spherical ball joints allow for near infinite arm positioning allowing the user to reach the most optimal viewing angle..This MagConnect tablet mount can be used in any material-handling use case and can be attached to a forklift, cart, storage shelf, or pallet jack.Universal compatibility.Adjusts to any square/flat or round surface up to 3"W.Made of carbon fiber and comes in black.Weight: 1.81 lbs..Dimensions: 12.5"H x 4.5"W x 2.7"D.Perfect for forklifts, carts, shelving, and pallet jacks.Built with spherical ball joints and a lightweight carbon fiber arm for near-infinite angle adjustment.Magnetic connection for quick mounting and dismounting.1-year manufacturer limited warranty

The Zebra 300139 L10 Vehicle Dock is a rugged, passive cradle designed specifically for securely mounting Zebra's L10-series tablets, including the XBOOK L10, XPAD L10, and XSLATE L10, in vehicles. Engineered to withstand harsh industrial environments, it features durable construction that resists heavy vibration and shock, making it ideal for field service, logistics, and warehouse operations. The dock supports VESA and AMP mounting patterns and includes a barrel-style key lock for added security, as well as a one-handed quick-release mechanism for convenience. Though it does not provide built-in power, it is compatible with Zebra's optional xDIM G3 module for charging and peripheral connectivity. With IP55 protection and compliance with MIL-STD-810G for durability, the 300139 dock ensures a stable and secure in-vehicle computing solution..The Zebra 300139 L10 Vehicle Dock is a passive vehicle cradle accessory designed for securely mounting rugged tablets in transportation, field service, and industrial environments where stability and quick access to the device are essential..The dock measures approximately 11.9 inches in length, 9.7 inches in width, and 3.0 inches in height, with a total weight of around 2.0 pounds, making it compact yet sturdy enough for in-vehicle installations..Compatible with Zebra's L10-series tablets, including the XBOOK L10, XPAD L10, and XSLATE L10, and is hardware-dependent rather than OS-dependent, meaning it supports any operating system those tablets are configured with, such as Windows 10 or Windows 11.