Tripp Lite 12U Rackmount Cabinets

Tripp Lite SMARTRACK™ 12U Rack enclosure cabinet is designed to remove warm air from the enclosure and draw in cool air by convection. Cabinet provides safe, secure installation for all equipment with its locking, reversible front door..Style: Floor standing.Dimensions: 33.5"(H) x 25"(W) x 23.6"(D).black.12U (H) x 19"(W) rack.Maximum weight capacity: 63.50 kg.Adjustable mounting depths from 3" to 33" inches.Top and bottom panel cable access openings, preinstalled casters and levelling feet.Locking, reversible front door.Locking, removable side panels.Casters and levelling feet.Includes rack enclosure, (36) m6 screws, (36) m6 cage nuts, (36) m6 washers, sracaster kit, (2) keys, owner's manual.Certifications and standards: EIA-310-E.Weight: 105 lbs..Warranty: 5 years.Tripp Lite SMARTRACK™ 12U Rack enclosure cabinet has adjustable vertical mounting rails which accommodate equipment depths from 3" - 33" and features leveling feet.

The SRWF12U38 SmartRack 12U Low-Profile Vertical-Mount Server-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices, two-post racks and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 400 pounds. Because the low-profile cabinet mounts vertically, it extends only 16 inches from the wall while housing equipment up to 35 inches deep, including 1U servers, UPS systems, battery packs and switches. In addition to 8U of rack space in the primary mounting area, it also includes a 4U mounting space at the top of the enclosure for patch panels. The top cover and front panel are removable to allow expedient access to equipment. The cover also locks securely with the included keys to help prevent damage, tampering or theft. The vented cabinet allows air to flow freely and keep equipment cool. Convenient top, bottom and side ports allow easy cable routing. The SRWF12U38's modular design allows you to disassemble the cabinet in minutes for wall-mounting with user-supplied hardware. Mounting holes are spaced 16 inches apart to accommodate standard wall studs. Equipment installation is easy with threaded mounting holes that support 12-24 mounting in two-post racks. Features Saves Valuable Workspace Recommended for areas with limited floor space where you need equipment to be secure, organized and out of the way. Houses EIA-standard 19 in. rack equipment in 8U of space. Also includes 4U of mounting space at the top of the enclosure for patch panels. Extends only 16 in. from the wall while housing equipment up to 35 in. deep. Maximum load capacity of 400 lb. Keeps Important Equipment Secure Top cover locks securely to help prevent damage, tampering or theft. Vented cabinet keeps equipment cool. Convenient ports with removable covers allow cable routing through top, bottom and sides Easy Enclosure and Equipment Installation Modular design for easy disassembly and assembly. Wall-mounting holes spaced 16 in. apart for standard wall stud placement. Threaded mounting holes support 12-24 mounting in 2-post racks. Rack spaces marked for easy reference Meets Payment Card Industry Standards Provides physical equipment and media security required for PCI DSS (Payment Card Industry Data Security Standard) compliance.Maximum load capacity of 400 lb..Locking steel cabinet vented to keep equipment cool.Secures 8U of 19 in. rack equipment up to 35 in. deep.Includes additional 4U of space for patch panels.Modular design for easy disassembly and assembly

Tripp Lite SmartRack 12U Industrial rack floor enclosure server cabinet comes with casters for easy mobility and can hold up to 1000 lbs. Cabinet has adjustable rack rails with square mounting holes to accommodate all standard 19" rack equipment..Dimensions: 25.2"(H) x 23.6"(W) x 38.5"(D).Black.Form factor: Floor standing.Rack size: 12U(H) x 19"(W) x 32.5"(D).Static/stationary weight capacity: 1000 lbs..Adjustable mounting depths from 3" to 20.5".Front door has ventilating louvers, built-in removable dust filter that can be replaced with standard furnace filters, locking, reversible front door, locking, removable solid side panels.4 large, high-performance fans in front door that pull air through the enclosure, from front to rear, 4 cable ports allow cable access while maintaining dust and moisture resistance.Fully assembled for quick installation.Meets all enclosure requirements towards PCI DSS.Applications: Ideal for harsh indoor environments that require protection from falling dirt or liquid, dust, light splashing, oil or coolant seepage or accidental contact by personnel.Includes 36 x M6 screws, M6 cagenuts, washers, removable/replaceable dust filter, 4 x casters, 4 x leveling feet, owner's manual.Certifications and standards: RoHS.Weight: 96 lbs..Warranty: 2 years limited.Tripp Lite SmartRack 12U Industrial rack floor enclosure cabinet in black color has a removable side panel as well as lockable door for safety and allows easy access to rack mounted equipment.

The Tripp Lite SmartRack low-profile UPS-depth rack enclosure cabinet with 200 lbs load capacity, stores and organizes 12U of 19" rack equipment up to 24.5" deep in locations with limited floor space. It has clear acrylic window that lets you monitor equipment without unlocking the door. Vented panels promote ample airflow that keeps equipment cool. Cabinet has convenient ports with removable covers to facilitate cable routing through top and bottom. It is suitable for network for network wiring closets, retail locations, classrooms and back offices. Cabinet with hinged back swings away from the wall to allow convenient back-door access to equipment and cabling. This wall mountable cabinet avoids equipment tampering and minimizes acoustic noise..Rack height: 12U.Weight capacity: 200 lbs..Dimensions: 25.06"H x 23.63"W x 25.5"D.Device depth: 3" - 24.5".Perfect for network wiring closets, retail locations, classrooms, back offices & other areas with limited floor space where equipment need to secure.Shatter-resistant clear acrylic front window prevents equipment tampering while minimizing acoustic noise and provides extra visual flair.Side panels and front door lock securely to prevent damage and tampering or theft.Vented panels allow generous airflow that keeps equipment cool.Rotate cabinet 180 deg before mounting to open reversible doors left or right.Hinged cabinet for convenient access swings away from the wall to allow easy back-door access to equipment and cabling during installation.Wall-mounting holes spaced 16" apart to accommodate standard wall stud placement.Rails support square-hole or threaded-hole mounting.Rack spaces numbered for easy reference.Contains 20 x M6 screws, 20 x M6 cage nuts, 20 x M6 washers, 20 x 12-24 screws, two keys and owner's manual.Meets EIA-310-D, IEC 60297-3-100, IP20 Protection, RoHS certifications and standards.Weight: 64 lbs..Comes with 5 years limited warranty

The Tripp Lite SmartRack low-profile UPS-depth rack enclosure cabinet with 200 lbs load capacity, stores and organizes 12U of 19" rack equipment up to 24.5" deep in locations with limited floor space. Vented panels promote ample airflow that keeps equipment cool. Cabinet has convenient ports with removable covers to facilitate cable routing through top and bottom. It is suitable for network for network wiring closets, retail locations, classrooms, back offices and other areas. Cabinet with hinged back swings away from the wall to allow convenient back-door access to equipment and cabling. This wall mountable cabinet avoids equipment tampering and minimizes acoustic noise..Rack height: 12U.Weight capacity: 200 lbs..Dimensions: 25.06"H x 23.63"W x 25.5"D.Device depth: 3" - 24.5".Perfect for network wiring closets, retail locations, classrooms, back offices & other areas with limited floor space where equipment need to secure.Convenient ports with removable covers allow cable routing through top and bottom.Side panels and front door lock securely to prevent damage and tampering or theft.Vented panels allow generous airflow that keeps equipment cool.Rotate cabinet 180 deg before mounting to open reversible doors left or right.Hinged cabinet for convenient access swings away from the wall to allow easy back-door access to equipment and cabling during installation.Wall-mounting holes spaced 16" apart to accommodate standard wall stud placement.Rails support square-hole or threaded-hole mounting.Rack spaces numbered for easy reference.Contains 20 x M6 screws, 20 x M6 cage nuts, 20 x M6 washers, 20 x 12-24 screws, two keys and owner's manual.Meets EIA-310-E, IEC 60297-3-100, IP20 Protection Rating, RoHS certifications and standards.Weight: 93.5 lbs..Comes with 5 years limited warranty

The Tripp Lite SRW12US33G SmartRack 12U wall-mount rack enclosure cabinet in black, is perfect for network closets, retail locations, classrooms and other areas with limited floor space where you need equipment to be secure or ganized and out of the way. This cabinet measuring 25" x 23.63" x 33.5", has durable steel/acrylic construction for longer endurance. Cabinet with 250 lbs weight capacity, has extra-deep capacity to accommodate most 1U servers, UPS systems, battery packs and switches. This cabinet swings away from the wall to offer easy access to equipment and cabling during installation/maintenance. It comes with two keys, 36 M6 screws, 36 M6 cage nuts, 36 M6 washers and 36 12-24 screws for added convenience..Wall-mount rack enclosure cabinet featuring high-quality constructions, withstands harsh environments.Dimensions: 25" x 23.63" x 33.5".Color: Black, Material: Steel, acrylic.Maximum weight capacity: 250 lbs..Static/stationary weight capacity: 250 lbs..Rack height: 12U.Grounding lug: Front and back door frames.Perfect for network closets, retail locations, classrooms and other areas with limited floor space where you need equipment to be secure or ganized.Swings away from the wall to allow easy access to equipment and cabling during installation and maintenance.Allows you monitor equipment without unlocking the enclosure while preventing equipment tampering and reducing acoustic noise.Vented panels allow generous airflow that keeps equipment cool while convenient ports with removable covers allow cable routing.Vertical mounting rails adjust in 0.875" increments to house equipment up to 32.5" deep while wall-mounting holes spaced 16" apart.Rails support square-hole or threaded-hole mounting while rack spaces numbered for easy reference.Meets EIA-310-D, IEC 60297-3-100, IP250, RoHS certifications and standards.Contains SRW12US33G SmartRack 12U server-depth wall-mount rack enclosure cabinet, 36 x M6 screws, 36 x M6 cage nuts, 36 x M6 washers.Weight: 94.5 lbs..Comes with 5 years limited warranty

Tripp Lite SmartRack 12U Wall mount rack enclosure cabinet has adjustable front and rear mounting rails that have square as well as tapped holes. Cabinet features heavy duty/high weight capacity side mount construction to hold up to 500 lbs..Dimensions: 26.46"(H) x 36.2"(W) x 24.77"(D).Black.Form factor: Wall mountable.Rack size: 12U(H) x 19"(W) x 32.5"(D).Static/stationary weight capacity: 500 lbs..Adjustable front and rear rails.Heavy-duty/high weight capacity side-mount construction.Fully vented doors and side panel.Dual-rail mounting designs supports equipment mounting via square holes or threaded holes.Multiple mounting positions for optional fans (SRFANWM).Applications: Server.Includes 20 x M6 cage nuts, 20 x M6 equipment mounting screws, 20 x M6 washers, 20 x 12-24 equipment mounting screws, Key set, owner's manual.Certifications and standards: EIA-310-E, RoHS.Weight: 101.4 lbs..Warranty: 5 years limited.Tripp Lite SmartRack 12U Heavy-duty wall mount rack enclosure cabinet in black color has a ventilated front door that provides generous airflow and allows easy access to rack mounted equipment.

The Tripp Lite SRW12USNEMA 12U wall mount switch-depth rack enclosure cabinet in black, protects the valuable equipment in harsh working environments. This cabinet assures easy equipment access and cable management in IT network applications with limited floor space. The front and side panels have ventilating louvers and it has a sealing gasket around the door frames. The cabinet has a dust filter and 4 large intake fans on the front door. This adjustable rack rails with square mounting holes accommodates 19" rack mount equipment with a maximum load capacity of up to 200 lbs..Wall mount rack enclosure cabinet is perfect for construction areas, utility plants, power stations, transportation terminals, distribution hubs.Dimensions: 25 cm H x 23.63 cm W x 21.6 cm D.Heavy-duty steel construction with a durable black powder-coated finish.Compatible with Server.12U rack height, weight capacity: 200 lbs. (stationary).Device depth: 3 - 20.5 cm, factory preset rack depth: 10.42".Grounding lug: Front and back door frames.Nominal input voltage(s) supported: 120VAC, nominal input voltage description: 120 V 50/60 Hz, input cord length: 6', input plug type: NEMA 5-15P.Built-in air filter, louvered vents and sealing door gaskets keep out dirt, dust, lint, oil, drips and splashes.Removable air filter can be replaced W/standard, off-the-shelf furnace filter, built-in high-performance door fan plug into standard NEMA 5-15R outlet.Swings away from the wall to allow easy back-door access to equipment and cabling during installation and maintenance.Reversible doors can open left or right to accommodate various rack configurations, side panels and doors lock securely to help prevent damage.Convenient ports with removable covers and protective brush strips allow cable routing through rear door.Ready to mount to the wall, wall-mounting holes spaced 16" apart for standard wall stud placement.Vertical mounting rails adjust in 0.875" increments to accommodate equipment up to 20.5" deep, such as network switches and patch panels.Rails adjust easily - unscrew them, slide them to desired depth and screw them back in, rails support square-hole or threaded-hole mounting.Includes 20 x M6 screws, 20 x M6 cage nuts, 20 x M6 washers, dust filter, AC power cord, 6' 2 x keys, owner’s manual.Meets EIA-310-E, IEC 60297-3-100, IP54 Protection Rating, Green compliant, RoHS, DIN 41494, UL 60950 standards.Weight: 60 lbs..Comes with 2 years limited warranty

The Tripp Lite SmartRack 12U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds. The side panels and front door lock securely to help prevent damage, tampering or theft. The front, top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible front door can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing. The SRW12U comes fully assembled and ready to mount to the wall, or use Tripp Lite's optional SRCASTER rolling caster kit to make it a mobile rack..Secures 12U of 19" rack equipment up to 16.5 in. deep.Maximum weight capacity of 200 lbs..Wall Mountable.Ventilated front door and side panels for increased airflow.Front door is lockable and reversible.Side panels are lockable and removable.Rack unit 12U; Rack size 3" - 16 1 2".Certifications EIA-310-E, Tested to NOM (Mexico), RoHs.2-Year Limited Warranty.Warranty 2 years limited.Tripp Lite SRW12U Wall-Mount Rack Enclosure Cabinet comes with ventilated front door and a side panel that allows generous airflow to keep the equipment operates safely.

Tripp Lite Wall mount rack enclosure cabinet is featured with hinged cabinet for easy equipment access. Wall mount rack is featured with depth of 33" to accommodate most 1U servers and provides extra clearance for cable management..Capacity: 113.4 Kg.Dimensions: 25"(H) x 23.6"(W) x 33 1/2"(D).Black.Rack: 12U, 19" rack width.Adjustable mounting depths from 3" to 33" - accommodates most 1U servers and simplifies cable management.Ventilated front door and side panels for increased airflow.Hinged cabinet swings away from wall bracket for easy equipment and cable access.Heavy duty construction to handle added leverage, locking, reversible front door, locking, removable side panels, top and bottom panel cable access openings.Fully assembled for quick installation.Includes SRW12US33 wallmount rack enclosure, (36) M6 screws, (36) M6 cage nuts, (36) M6 washers, (2) keys, owner's manual.Certifications: EIA-310-D, IEC 60297-3-100, DIN 41494, IP250 protection rating, RoHS.Weight: 100 lbs..Warranty: 5 years limited.Tripp Lite Wall mount rack enclosure cabinet has heavy duty construction to support added leverage and is fully assembled for quick installation.

Wall-mount cabinet secures and organizes 12U of 19-inch rack equipment in network closets, classrooms and other locations with limited floor space. Houses network switches and patch panels up to 20.5 inches deep..Maximum load capacity of 200 lbs (90.7 kgs).Swings away from wall on hinge for easy back-door access.Locking steel cabinet vented at sides, front, top and bottom.Flow-through ventilation keeps equipment cool.Secures 12U of 19 in. rack equipment up to 20.5 in. deep.Perfect for network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way.Rack Depth: Shallow.Number of Vertical Mounting Rails: 4.Houses EIA-standard 19 in. rack equipment in 12U of space.Rotate cabinet 180° before mounting to open reversible doors left or right.Ships fully assembled for quick installation.Provides physical equipment and media security required for PCI DSS (Payment Card Industry Data Security Standard) compliance.Vertical mounting rails adjust in 7/8 in. increments to accommodate equipment up to 20.5 in. deep, such as network switches and patch panels.Wall-mounting holes spaced 16 in. apart for standard wall stud placement.Package Includes:SRW12US SmartRack 12U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet,(20) M6 screws,(20) M6 cage nuts,(20) M6 washers,(20) 12-24 screws,(2) Keys,Owner’s manual.Product Compliance: RoHS; EIA/ECA-310-E; UKCA.5-year limited warranty.Tripp Lite 12U Wall Mount Rack Enclosure Server Cabinet Hinged Wall mount - 19" 12U , Wall Mounted

The Tripp Lite SmartRack SRW12UDP Switch-Depth-Plus rack cabinet secures and organizes 12U of 19" rack equipment in network closets, classrooms and other locations with limited floor space. This locking steel cabinet in black, has flow-through ventilation at side, front, top and bottom that helps to keep the equipment cool. The low-profile cabinet has 200 lbs load capacity..Low-profile rack cabinet secures and organizes equipment in network closets.Dimensions: 25.1"H x 23.6"W x 21.8"D, 12U (rack height), 19"W x 20.5"D (rack).Black steel.Load capacity: 200 lbs..Form factor: Wall mountable.Interface/ports: 8 x RJ-11.Application/usage: LAN switch, patch panel.Convenient ports with removable covers allow cable routing through top and bottom.Front and back door frames, vented panels allow generous airflow that keeps equipment cool.Perfect for network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space.Side panels and front door lock securely to help prevent damage, tampering or theft.Includes 20 x M6 screws, 20 x M6 cage nuts, 20 x M6 washers, 20 x 12-24 screws, 2 x keys, owner's manual.RoHS compliant.Weight: 58.4 lbs..Comes with 5 year limited warranty.Black low-profile rack cabinet secures and organizes 12U of 19-inch rack equipment in network closets, classrooms and other locations with limited floor space.

The Tripp Lite SmartRack low-profile switch-depth rack enclosure cabinet with 200 lbs load capacity, stores and organizes 12U of 19" rack equipment up to 16.5" deep in locations with limited floor space. This cabinet has clear acrylic window that lets you monitor equipment without unlocking the door. Vented panels promote ample airflow that keeps equipment cool. Cabinet has convenient ports with removable covers to facilitate cable routing through top and bottom. It is suitable for use in network closets, retail outlets, warehouses, offices, classrooms and other locations. This wall mountable cabinet avoids equipment tampering and minimizes acoustic noise..Has steel construction for durability.Form factor: Wall mountable.Comes in black powder coat color.Dimensions: 25.1"(H) x 23.6"(W) x 17.7"(D), 12U(H) x 19"(W) x 16.5"(D) rack.Device depth: 7.62 cm - 41.9 cm.Maximum load capacity: 200 lbs..Grounding lug: Front and back door frames.Front door has shatter-resistant clear acrylic window and locking steel cabinet with sides, top as well as bottom ventilation.Ideal for network wiring closets, retail locations, classrooms and back offices space.Allows you to monitor equipment without unlocking the enclosure and prevents equipment tampering.Front door and side panels lock securely to prevent damage, tampering or theft and vented panels let generous airflow that keeps equipment cool.Rotate cabinet 180 deg before mounting to open reversible front door left or right & convenient ports allow cable routing through top/bottom.Has rails that support square-hole or threaded-hole mounting and rack spaces come numbered for easy reference.Includes M6 screws, M6 cage nuts, M6 cup washers, 12-24 screws, removable mounting plate, mounting plate screws, keys and owner's manual.Meets UL/CSA 60950-1, EIA-310-E, Tested to NOM and RoHS certifications or standards.Weight: 22 kg.Comes with 5 years limited warranty

Tripp Lite 12U wall-mount rack enclosure includes convenient cutouts at its top and bottom panels for convenient cable routing. Enclosure has adjustable rails with square mounting holes to standard 19" equipments..Material: Plexiglas front door.Form factor: Wall mountable.Dimensions: 25"(H) x 23.6"(W) x 21.6"(D).black.12U (H) x 19"(W) rack.Hinged cabinet swings away from wall bracket for easy equipment and cable access, adjustable mounting depths from 3" to 20 1/2" inches.Locking, reversible front door, locking, removable side panels.Fully assembled for quick installation.Top and bottom panel cable access openings.Adjustable mounting depths from 3" to 20 1/2" inches.Includes smartrack wall-mount enclosure rack cabinet, convenient cutouts for cable routing.Certifications and standards: EIA-310-E.Weight: 60 lbs..Warranty: 5 years.Tripp Lite 12U wall-mount rack enclosure ensures easy equipment access with its hinged cabinet swings and features plexiglas front door.

The Tripp Lite SmartRack flat-pack low-profile switch-depth open frame rack with 200 lbs load capacity, secures and organizes 12U of 19" rack equipment up to 18" deep in locations with limited floor space. The pivoting, 2-post open-frame design provides convenient access for installing, configuring and servicing equipment and cabling from any direction. It is suitable for use in network closets, retail outlets, warehouses, offices, classrooms and other locations. Heavy-duty rack comes with assembly and equipment-mounting hardware for easy installation..Has steel construction for durability.Form factor: Wall mountable.Comes in black powder coat color.Dimensions: 24.8"(H) x 20.1"(W) x 18.2"(D), 12U(H) x 19"(W) x 18"(D) rack.Device depth: 45.72 cm max.Maximum load capacity: 200 lbs..Provides easy access to equipment and cabling.Simple to assemble and mount, with included assembly and equipment-mounting hardware.Ideal for network wiring closets, back offices and other secure areas with limited floor space where there is a requirement of locked enclosure.Wall mounting holes have 16" space in between for standard wall stud placement.Has rails that support threaded-hole equipment mounting and rack spaces come numbered for easy reference.Includes 12-24 equipment mounting screws, M5 button-head cap screws, M6 x 12 Phillips-head screws, vertical mounting rails and owner's manual.Meets Tested to NOM, EIA-310-D, IEC 60297-3-100 and RoHS certifications or standards.Weight: 6.48 kg.Comes with 5 years limited warranty