Ubiquiti Non-Stackable Ethernet Switches

Ubiquiti UniFi is a configurable Gigabit Layer 2 switch with twenty-four Gigabit Ethernet ports including sixteen auto-sensing 802.3at PoE+ ports, and two SFP ports. It provides Gigabit PoE links to your RJ45 Ethernet devices and Gigabit fiber uplink options to your enterprise network. Features a 1.3" touch LCM to provide status information. With a depth of 7.9", the compact fanless design can be easily installed in a SOHO rack cabinet. Managed and configured by the UniFi Network Controller with UniFi mobile app support, the switch offers an extensive suite of advanced Layer 2 switching protocols and features, including operation mode (switching, mirroring, or aggregate) per port. The UniFi Network Controller and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere. FP ports enable network uplinks of up to 1 Gbps. The UniFi PoE Switch features fanless, silent thermal cooling, so it can be located in any workspace..Configurable Gigabit Layer 2 switch with 24 Gigabit Ethernet ports including 16 auto-sensing 802.3at PoE+ ports, and two SFP ports.Contains 24 10/100/1000 RJ45 ports and two 1G SFP Ethernet ports.Managed and configured by the UniFi Network Controller with UniFi mobile app support, the switch offers an extensive suite of advanced Layer 2 switching protocols and features.Dimensions: 1.72"H x 16.71"W x 7.87"D.Max. power consumption (excluding PoE output): 18W.Certifications and standards: Meets or exceeds CE, FCC, IC standards.1.3" touch screen displays status information for easy monitoring and quick troubleshooting.Quiet cooling for any workspace.SFP ports enable network uplinks of up to 1 Gbps.Features fanless, silent thermal cooling, so it can be deployed in areas where fan noise would be distracting..Offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss.Comes in silver.2-year manufacturer limited warranty

A 48-port, Layer 3 Etherlighting™ switch with 2.5 GbE and PoE++ output..48-port, Layer 3 Etherlighting switch with 2.5 GbE and PoE++ output.Supports Power over Ethernet.Offers 166.66Mpps forwarding rate, 224Gbps switching capacity, and 112Gbps total non-blocking throughput.Rack-mountable.Managed with UniFi Network 8.0.24 and later.Maximum power consumption: 100W (excluding PoE output).Contains 16 2.5 GbE ports including eight PoE+ and eight PoE++, 32 GbE ports including 24 PoE+ and eight PoE++, four 10G SFP+ ports.Etherlighting ports that illuminate to indicate port location, speed/link, and native VLAN/network.1.3" touch-screen LCM display for convenient use.Provides 720W total PoE availability.DC power backup ready.Meets or exceeds CE, FCC, IC standards

Expand and power your network with the UniFi PoE switch, part of the Ubiquiti UniFi Enterprise System. The UniFi PoE switch features fanless, silent thermal cooling, so it can be deployed in areas where fan noise would be distracting..This smart switch contains 32 x Gigabit RJ45 ports with 802.3af/at, 16 x Gigabit RJ45 ports, and 4 x 1G SFP ports.PoE support simplifies your network infrastructure and cabling; PoE ports offer 802.3af/at to power your PoE devices, such as UniFi APs and cameras.Provides up to 104Gbps of switching capacity.Rack-mountable for convenient use.UniFi Network Controller can provision UniFi devices, map out networks, and quickly manage system traffic. Important network details are logically organized for a simplified, yet powerful, interface.Maximum power consumption: 45W.Meets or exceeds CE, FCC, IC standards.Offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss.SFP ports enable network uplinks up to 1Gbps.Features a 1.3" LCM color touch screen with AR switch management.2-year manufacturer limited warranty

Ubiquiti UniFi switch Pro is a fully managed Layer 3 switch with 48 Gigabit Ethernet ports. Four 10G SFP+ uplinks offer link aggregation for higher capacity and increased availability. The UniFi switch Pro features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing, static routing, and DHCP server. The UniFi switch Pro is perfect aggregation and access layer switch for any UniFi solution – it combines innovative near-silent cooling with UniFi SmartPower RPS power redundancy. UniFi Network application and UniFi Network mobile app allow admins to configure and monitor virtually all of the switch features in an intuitive graphical user interface from anywhere..Fully managed switch features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing, static routing, and DHCP server.Contains 48 10/100/1000 RJ45 ports and four 1/10G SFP+ Ethernet ports Ethernet In-Band.UniFi Controller allows configuring: operation mode (switching, mirroring, or aggregate) per port, network/VLAN configuration, jumbo frame and flow control services, network settings, etc..Dimensions: 1.72"H x 17.42"W x 11.24"D.Maximum power consumption: 60W.Certifications and standards: Meets or exceeds CE, FCC, IC standards.Passive cooling design allows the switch to be located in any workspace.1.3" touch screen displays status information for easy monitoring and quick troubleshooting.SFP+ ports enable high-capacity uplinks of up to 10Gbps, so you can directly connect to a high-performance storage server or deploy a long-distance uplink to another switch.Offers Layer 3 capabilities, such as inter-VLAN routing, static routing, and DHCP server functionality.Features the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss.OS support: Linux, Mac OS X, or Microsoft Windows 7/8/10.Pack includes: switch, two rack-mount brackets, eight bracket screws, four mounting screws, four cage nuts, power cord, four rubber feet.2-year manufacturer limited warranty

The NanoSwitch is an outdoor, four-port Gigabit switch with PoE pass-through. It is powered by 24V Passive PoE and provides up to 24W of power on three PoE out ports. The NanoSwitch is designed for outdoor deployment and supports up to 4Gbps total, non-blocking line rate..Unmanaged switch with four Gigabit Ethernet ports.One Gigabit 24V passive PoE in port and three Gigabit 24V passive PoE out ports.Total non-blocking line rate: 4Gbps.Dimensions: 7.73"H x 3.68"W x 1.28"D.Maximum power consumption: 30W.Certifications and standards: Meets or exceeds CE, FCC, IC standards.Featuring a durable, weatherproof form factor, switch is great for outdoor deployment; made of white polycarbonate.Can be easily mounted on a pole or wall.1-year manufacturer limited warranty

Ubiquiti UniFi configurable Gigabit Layer 2 switch with 48 Gigabit Ethernet ports and four SFP ports, providing 1 Gigabit links to your devices and fiber uplink options to your enterprise network. It features a 1.3" touch LCM, a nd a fanless design. The LCM provides current switch states and the necessary information you need for quick diagnosis. Managed and configured by the UniFi Network Controller a nd mobile app, the UniFi switch offers an extensive suite of advanced Layer 2 switching protocols and features, including operation mode (switching, mirroring, or aggregate) per port. The UniFi Network Controller and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere..Configurable Gigabit Layer 2 switch with 48 Gigabit Ethernet ports and four SFP ports, providing 1Gbps links to your devices and fiber uplink options to your enterprise network.48 gigabit ports provide a 52Gbps switching capacity.Rack-mountable for convenient use.Works with the UniFi Network Application.Meets or exceeds CE, FCC, IC standards.Features a 1.3" LCM color touch screen with AR switch management

Ubiquiti UniFi switch Pro is a fully managed Layer 3 switch with 24 Gigabit Ethernet ports. Four Two 10G SFP+ uplinks offer link aggregation for higher capacity and increased availability. The UniFi switch Pro features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing, static routing, and DHCP server. The UniFi switch Pro is perfect aggregation and access layer switch for any UniFi solution – it combines innovative near-silent cooling with UniFi SmartPower RPS power redundancy. UniFi Network application and UniFi Network mobile app allow admins to configure and monitor virtually all of the switch features in an intuitive graphical user interface from anywhere..Fully managed switch features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing, static routing, and DHCP server.Contains 24 10/100/1000 RJ45 ports and two 1/10G SFP+ Ethernet ports Ethernet In-Band.UniFi Controller allows configuring: operation mode (switching, mirroring, or aggregate) per port, network/VLAN configuration, jumbo frame and flow control services, network settings, etc..Dimensions: 1.72"H x 17.42"W x 11.24"D.Maximum power consumption: 30W.Certifications and standards: Meets or exceeds CE, FCC, IC standards.Passive cooling design allows the switch to be located in any workspace.1.3" touch screen displays status information for easy monitoring and quick troubleshooting.SFP+ ports enable high-capacity uplinks of up to 10Gbps, so you can directly connect to a high-performance storage server or deploy a long-distance uplink to another switch.Offers Layer 3 capabilities, such as inter-VLAN routing, static routing, and DHCP server functionality.Features the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss.OS support: Linux, Mac OS X, or Microsoft Windows 7/8/10.Pack includes: switch, two rack-mount brackets, eight bracket screws, four mounting screws, four cage nuts, power cord, four rubber feet.2-year manufacturer limited warranty

Ubiquiti UniFi Pro is a fully managed Layer 3 switch with eight 802.3bt (PoE++) and 16 802.3at (PoE+) Gigabit Ethernet ports. Two 10G SFP+ uplinks offer link aggregation for higher capacity and increased availability. The UniFi Pro features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing, static routing, and DHCP server. The UniFi Pro is the perfect access layer switch for any UniFi solution it combines up to 400W of near-silent PoE power with UniFi SmartPower RPS power redundancy. UniFi Network Controller and UniFi Network mobile app allow admins to configure and monitor virtually all of the switch features in an intuitive graphical user interface from anywhere..Fully managed Layer 3 switch with eight 802.3bt (PoE++) and 16 802.3at (PoE+) Gigabit Ethernet ports.Contains eight Gigabit RJ45 802.3bt PoE++ ports, 16 Gigabit RJ45 802.3at PoE+ ports, two 10G SFP+ ports.UniFi Network Controller and UniFi Network mobile app allow admins to configure and monitor virtually all the switch features in an intuitive graphical user interface from anywhere.Dimensions: 1.72"H x 17.42"W x 11.24"D.Max. power consumption (excluding PoE output): 50W.Certifications and standards: Meets or exceeds CE, FCC, IC standards.In addition to Layer 2 switching protocols and features, offers Layer 3 capabilities, such as inter‑VLAN routing, static routing, and DHCP server functionality.Can be located in any workspace; its integrated fans have built-in PWM (power management) control, air ducts and covers, and temperature sensors for the best user experience.SFP+ ports enable high-capacity uplinks of up to 10Gbps, so you can directly connect to a high-performance storage server or deploy a long-distance uplink to another switch.1.3" touch screen displays status information for easy monitoring and quick troubleshooting

Ubiquiti UniFi Switch Pro 48 PoE is a fully managed Layer 3 switch with eight 802.3bt (PoE++) and 40 802.3at (PoE+) Gigabit Ethernet ports. Four 10G SFP+ uplinks offer link aggregation for higher capacity and increased availability. The UniFi Pro features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing, static routing, and DHCP server. The UniFi Pro is the perfect access layer switch for any UniFi solution – it combines up to 600W of near-silent PoE power with UniFi SmartPower RPS power redundancy. UniFi Network Controller and UniFi Network mobile app allow admins to configure and monitor virtually all of the switch features in an intuitive graphical user interface from anywhere..Fully managed Layer 3 switch with eight 802.3bt (PoE++) and 40 802.3at (PoE+) Gigabit Ethernet ports.Contains eight Gigabit RJ45 802.3bt PoE++ ports, 40 Gigabit RJ45 802.3at PoE+ ports, four 10G SFP+ ports.UniFi Network Controller and UniFi Network mobile app allow admins to configure and monitor virtually all the switch features in an intuitive graphical user interface from anywhere.Dimensions: 1.72"H x 17.42"W x 15.73"D.Max. power consumption (excluding PoE output): 60W.Certifications and standards: Meets or exceeds CE, FCC, IC standards.In addition to Layer 2 switching protocols and features, offers Layer 3 capabilities, such as inter‑VLAN routing, static routing, and DHCP server functionality.Can be located in any workspace; its integrated fans have built-in PWM (power management) control, air ducts and covers, and temperature sensors for the best user experience.SFP+ ports enable high-capacity uplinks of up to 10Gbps, so you can directly connect to a high-performance storage server or deploy a long-distance uplink to another switch.1.3" touch screen displays status information for easy monitoring and quick troubleshooting.Comes in silver.2-year manufacturer limited warranty

Connect your compatible broadband modem to the Meraki Go GX20 Security Gateway through the Gigabit Ethernet WAN port, then mount the device onto a desktop or wall using the included kit. You can configure and manage your device from almost anywhere through the Meraki Go mobile app..Type of Ethernet Switch: Security Gateway.No. & Type of Ports: 5-Port.System Management: Router & Firewall Combo.Works with Meraki Go Mobile App.Dimensions (W x D x H): 6.8 x 4.4 x 1".Power Consumption: 50 W.Standards & Certifications: 802.3af.Design: Desktop & Wall Mountable.1 Year Warranty.Provide your business with added peace of mind with the Meraki Go GX20 5-Port Security Gateway from Cisco, which combines firewall features with a network router.

The NETGEAR 5-port Multi-Gigabit Unmanaged Switch, MS305, helps businesses cost-effectively expand their networks with multi-gig speeds. The MS305 Multi-Gigabit Ethernet switch comes with five (5) 2.5G ports in a metal case and can be placed on a desk or mounted on a wall with the included wall mount kit. This switch is energy efficient, built to last, and rigorously tested to provide the reliability businesses need. 802.1p traffic prioritization and jumbo frame support allow for seamless integration with more sophisticated networks..5 x 1G/2.5G Multi-Gig Ethernet ports.Simple plug-and-play setup with no software to install or configuration needed.Supports desktop or wall mount placement

NETGEAR 300 Series Gigabit Ethernet Unmanaged switches with PoE provide easy, reliable, and affordable network connectivity for home and small offices. With these unmanaged plug-and-play switches, you can expand your network connections to multiple devices instantly. The unmanaged switches provides power and data from a single Ethernet (CAT-5e) cable to devices such as IP cameras, VoIP/ Internet-based phones, wireless access points, etc. The majority of these models also support PoE power auto-balance and allocation feature..5-Port, Gigabit, Unmanaged Network Switch.4-Ports PoE+ (83W).10 Gb/s Switching Capacity.Form Factor Desktop, Wall Mountable.Power Consumption 85.77 W.1.448 Mpps Forwarding Rate.128KB Buffer Memory.83W Power Budget.4 x PoE+ Compliant Ports.Auto-MDI/MDIX eliminates the need for crossover cables.LED indicators for ease of use

Brainboxes Industrial compact 5-port Gigabit Ethernet unmanaged switch is perfect factory floor, in vehicle and marine applications. Automatic detection of data transmission speed: 10/100/1000 Mbps. Dual input redundant power supply with wide voltage range means it can be powered from USB or on the 24V factory floor. Power terminal is removable with numbered pins for easy wiring. Power consumption is optimized based on the status of the link device. No software required..This unmanaged compact Ethernet switch is perfect for factory floor, in-vehicle, and marine applications.Contains 5 x RJ45 jacks, 10/100/1000Mbs autosensing (auto-MDIX) Ethernet ports.No software required: simply plug in any ethernet cable.Dimensions: 3.9"H x 3.7"W x 0.9"D.Power consumption: 3.6W.Certifications and standards: Meets or exceeds the Microsoft Certified Gold Partner, WEEE, RoHS, AEO (C-TPAT), CE standards.Nonconducting polyamide case with all-round small profile.Easy wire-removable screw terminal block.All Ethernet ports are auto-MDI/MDIX supporting straight through or crossover Ethernet cables.Integral DIN mount with ground.Lifetime manufacturer limited warranty

The NETGEAR SOHO Ethernet Unmanaged Switches provide easy and affordable network connectivity to small offices and home/offices..Gigabit Ethernet switches connect multiple devices, delivering speeds up to 10x faster than Fast Ethernet.Plug-and-play technology.Single color LEDs monitor link and activity.Supports Fast and Gigabit Ethernet devices with automatic speed-sensing and AutoUplink technology.Certifications and standards: CE, FCC Part 15, Class A, EN 55 022 (CISPR 22) Class A, VCCI Class A, C-Tick, UL 1950.ProSafe LIFETIME WARRANTY/ Next Business Day Replacement/ 24/7 Advanced Tech Support via chat.Expanding Wired Connectivity for SOHO Networks

Brainboxes Industrial compact 5-port Gigabit Ethernet unmanaged switch is perfect factory floor, in vehicle and marine applications. Automatic detection of data transmission speed: 10/100/1000 Mbps. Dual input redundant power supply with wide voltage range means it can be powered from USB or on the 24V factory floor. Power terminal is removable with numbered pins for easy wiring. Power consumption is optimized based on the status of the link device. No software required..This unmanaged compact Ethernet switch is perfect for factory floor, in-vehicle, and marine applications.Contains 5 x RJ45 jacks, 10/100/1000Mbs autosensing (auto-MDIX) Ethernet ports.No software required: simply plug in any ethernet cable.Dimensions: 3.9"H x 3.7"W x 1.1"D.Power consumption: 3.6W.Certifications and standards: Meets or exceeds the Microsoft Certified Gold Partner, WEEE, RoHS, AEO (C-TPAT), CE standards.Tough metal case with all-round small profile.Easy wire-removable screw terminal block.All Ethernet ports are auto-MDI/MDIX supporting straight through or crossover Ethernet cables.Integral DIN mount with ground.Lifetime manufacturer limited warranty

Industrial 5 Port Gigabit PoE Switch - 30W - Power Over Ethernet Switch - Hardened GbE PoE+ Unmanaged Switch - Rugged High Power Gigabit Network Switch IP-30/-40 C to 75 C (IESC1G50UP).FLEXIBLE POWER INPUT: Power over Ethernet network switch can be hardwired using terminal block (48-56VDC) power or powered using a standard (48-56VDC) Type-N barrel wall adapter (not included).POWER OVER ETHERNET: Gigabit PoE Switch provides up to 30W of PSE power per PoE port to IEEE 802.3af (PoE) & IEEE 802.3at (PoE+) | Use with devices like cameras & access points using Cat 5e/6.ROBUST DESIGN: Industrial Network Switch w/MTBF 500,000+hrs @ 50C | Vibration, shock & free fall rated | Rugged industrial IP-30 aluminum housing | -40C to 75C hardened operating temp | DIN/Wall Mount.STARTECH.COM ADVANTAGE: IT professionals' choice for over 30 years | This Gigabit PoE switch is backed for 2-years by StarTech.com, including free 24/5 North America based multi-lingual tech support.TECH SPECS: 5 Port GbE Switch | 4 PoE ports | IEEE 802.3af / IEEE 802.3at | 10/100/1000 Mbps | Unmanaged | Redundant Power Input | Terminal Block Power | Total power budget: 120W.Rugged PoE Switch | 30 Watts | IP-30 Aluminum Housing | Unmanaged | 5 Port