UL Listed Power Strips

The Tripp Lite SS3612 black/gray 15' 12-outlet power strip with surge protection is suitable for internetworking, telecommunications, audio/video and live sound applications. This power strip works with maximum input current of 15 A, input voltage of 125 VAC and power rating of 1800 W. It includes set of adjustable mounting clips, warranty information and instruction manual..Has 12 x NEMA 5-15R receptacles.15' Cord for better connection.Comes in black/gray color.Dimensions: 1.25"H x 1.62"W x 36"D.Maximum input current: 15 A.Input voltage: 125 VAC.Maximum frequency: 60 Hz.Power rating: 1800 W.Outlet spacing: 2.48".Maximum surge Amps: 22000.Suitable for internetworking, telecommunications, audio/video and live sound applications.AC suppression joule rating: 1050, UL1449 let through rating: 500 V UL verified.Contains set of adjustable mounting clips, warranty information and instruction manual.cUL, UL1363 and UL1449 3rd EDITIO Listed.Comes with lifetime warranty

Tripp Lite™ Power distribution unit is made of sheet metal for durability and has a input/output voltage rating of 120 V. Power distribution unit is rack mountable and supplies equipment with continuous power from any protected UPS..Single phase NEMA L5-30P 4.57m 30A 120 VAC input.50/60 Hz frequency.Outlet connector: 12 x NEMA 5-15/20R.Black.Cord length: 15'.Output voltage: 120 V, Overload protection: Two 20A breakers protect 6 outlets each.Material of construction: Sheet metal.Maximum input current: 30A, PDU input voltage 100, 120, 127V, Voltage compatibility: 120 VAC.Dimensions: 1.75"(H) x 17.5"(W) x 6.5"(D).Outlets center to center measurement: Distance between outlets = 30.20mm, Distance between Bank 1 and Bank 2 = 41.45mm, TVSS grounding: Rear grounding lug.Style: Rackmount, vertical rackmount, wallmount/under counter, Form factors supported: 1U rackmount, 0U vertical rackmount, wall-mount, and under-counter installation.Outlets are arranged in two loading banks, each with separate 20A breaker protection, highly reliable design includes rugged all-metal housing and secure rackmount installation with included mounting accessories.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Ideal means of powering networking equipment in datacenters, computer rooms and network closets, supplies equipment with continuous power from any protected UPS, generator or mains input power source.Package contents: PDUMH30 metered rackmount PDU, owner's manual with warranty information.Certifications and standards: Tested to UL60950-1 (USA) and CAN/CSA C22.2 No. 60950-1-03 (Canada), RoHS compliant.Weight: 7 lbs..Warranty: 2 years limited.Tripp Lite Power Distribution Unit - Ideal for Powering Servers

Detachable mounting flanges are configurable for rackmount, wall mount and under-counter installation..6 Outlets.15' black cord.Applications: Offers multiple outlet power distribution for multiple loads in 19" rackmount, wall mount and under-counter applications.Black.Input voltage: 120 VAC.Output voltage: 120 VAC.Input current: 15 A.Plug/connector type: NEMA 5-15P.Form factor: Rack-mountable.Frequency: 50/60 Hz.Circuit breaker: 15 A.Versatile all-metal cabinet with detachable mounting flanges allows rackmount, wall mount, undercounter and other creative mounting creative mounting options.Uses one rack space (1U) in standard 19" rack ("zero U" mounting possible in many racks).Unfiltered electrical pass-through reliably distributes alternate waveform AC power from UPS or generator to supported equipment.Lighted power switch confirms power on/off status, Latching switch guard prevents accidental turn off.Certifications and standards: UL1363, cUL, NOM.Includes: RS-0615-R 6-outlets power strip, warranty information, instruction manual.Dimensions: 1.75"(H) x 17.5"(W) x 4.5"(D).Warranty: Lifetime limited.Tripp Lite Power Strip - Distributes Unfiltered Electricity

The Tripp Lite PDUMH15-ISO 1.44 kW single-phase metered PDU with isobar surge suppression, provides real-time local reporting of load level in amps and noise suppression. It features a digital display that shows output current to prevent circuit overload when additional equipment is added and has a set of three front-panel LEDs to show wiring fault, protection present and line OK status. This PDU has a rugged all-metal housing and offers rackmount installation with included mounting accessories. It is compatible with 120 VAC sine wave input. The 1U PDU features NEMA 5-15P 15 A 120 V input plug with 15' cord and 14 NEMA 5-15R outlets..Power distribution unit offers reliable and cost effective power distribution.Dimensions: 1 3/4"(H) x 17 1/2"(W) x 4 1/2"(D).Sheet metal construction for long lasting durability.Receptacles: NEMA 5-15P input and 14 x NEMA 5-15R output.Voltage: 120 VAC at 50/60 Hz input/output, Input current: 15 A.Output capacity: 1.44 kW.Input cord length: 15'.Form factor: Horizontal (1U, 2U).Offers overload and surge protection.AC suppression joule rating: 3840 J, AC suppression surge current rating: 60000 A, Clamping voltage (RMS): 140 V.Front panel LEDs: Set of three diagnostic LEDs report LINE OK (green), suppressor or wiring FAULT (red) and PROTECTION PRESENT (green) status.Storage temperature: 5 - 122 deg F (-15 - 50 deg C), Relative humidity: 5 - 95 percent non-condensing, Operating elevation: 0 - 10000'.Built-in two digit visual meter continuously reports PDU load level in amps.Offers SOBAR Network-grade AC surge and noise suppression with EMI/RFI filtering.Contains owner's manual with warranty information.Meets UL1449 3rd Edition (USA) and CSA (Canada), RoHS standards or certifications.Weight: 4.6 lbs..Comes with 2 years limited warranty

Deliver reliable high‑density rack power with this 1U 20‑Outlet Rackmount PDU, designed for enterprise, AV, and IT environments that require secure and scalable power distribution. Equipped with sixteen IEC C13 outlets and four IEC C19 outlets, it supports a wide range of equipment while offering both front and rear access for optimized cable management. Each C19 outlet and every group of four C13 outlets is protected by dedicated 15A circuit breakers, preventing overload damage and ensuring continuous uptime for critical systems. The built‑in 8 ft (2.4 m) power cord provides flexible installation, while included mounting brackets support horizontal or vertical deployment in standard 19" EIA‑310 racks. Constructed from rugged powder‑coated SPCC steel and TAA‑compliant, this PDU delivers dependable 240V power for demanding workloads in data centers, server rooms, and edge deployments..Operates as a single‑phase 240V rack PDU..Accepts 240V AC input for high‑power use..Protects with 15A breakers for each outlet group..Fits a 1U rack footprint for dense cabinets..Connects using IEC C13 and C19 power inputs..Supplies sixteen C13 and four C19 outlets..Supports a total of twenty output ports..Includes an 8 ft cord for extended reach..Ships with screws, washers, and cage nuts..Meets UL 1363 and EIA/ECA‑310‑E standards..2‑year manufacturer warranty.

This 10-outlet (125V 16A) rack PDU delivers a power distribution solution for your server rack/cabinet. The business-grade 1U power distribution unit can be mounted horizontally in any 19" server rack 4" in depth or greater, to provide ten 125V (16A) power outlets. You can access ten plugs on the front of the horizontal-mount network rack PDU. This power distribution system consolidates your power source and enables you to control all powered devices from one switch. The front of the rackmount power strip features two LEDs that indicate proper ground and surge detection while enabling you to control the power state with an illuminated power/reset switch. This PDU includes an 8 ft. long power cord. To prevent costly breakdowns of connected devices, the rackmount PDU features a built-in 20 Amp (20A) circuit breaker and reset switch, ensuring the dependable performance of vital equipment..10-outlet rackmount power strip delivers a power distribution solution for your server rack/cabinet.Features 10 x 5-15/20R outlets.Equipped with a 8' long power cord.Features two LEDs that indicate proper ground and surge detection, while enabling you to control the power state with an illuminated power/reset switch.125V input voltage.Dimensions: 1.97"H x 17.5"W x 5.1"D.Made of durable plastic and steel, comes in black.Circuit breaker provides optimum power control and overload protection.Meets or exceeds ANSI/EIA RS-310-D, RoHS, and UL standards.Can be mounted horizontally in any 19" server rack 4" in depth or greater, to provide ten 125V (16A) power outlets.Fits many network/data racks, including StarTech's wide range of 2-post and 4-post racks.2-year manufacturer limited warranty

The Tripp Lite Isobar ISOBAR4ULTRA 4-outlet 3330 J surge protector is suitable for office and home appliances such as laptop, computer, television and other devices. The sockets are isolated in two rows to prevent intrusion, in all metal case. This surge protector contains multi-component suppression circuits with ferrite rod-core inductors, toroidal chokes, HF/VHF capacitors and coated with many metal oxide layers. It comes with a 6' cord and four safety seal for unused outlets. The AC suppression joule rating is 3330 J/97,000 A and compatible for use with 120 VAC, 50/60Hz devices..4 outlet 6' cord 3300 joules surge protector secures electrical devices from voltage spikes.Has four NEMA 5-15R output receptacles.Dimensions: 2 1/2"H x 6"W x 3 1/2"D, Cord length: 6'.Has durable metal housing and metal end caps are fitted with keyhole mounting tabs for wallmount installation.Nominal input voltage: 120 VAC, Frequency compatibility: 50/60 Hz, Output: 1440 W.Meets UL1449 3rd Edition requirements by ETL, Approved for Canada by ETL, Exceeds IEEE 587 category A&B specifications standards and certifications.Provides full normal mode and common mode line surge suppression protection modes.Circuit breaker (amps): 12 A, Maximum surge amps: 135000.Supports up to two large transformers plug accessories without covering remaining outlets.Input connection type: NEMA 5-15P input plug.Comes with combination AC circuit breaker and two position red illuminated on/off switch along with diagnostic LED.AC suppression response time: NM = 0 ns. CM = <1 ns, Clamping voltage (RMS): 140 V, AC suppression surge current rating: 85,000 amps.Utilizes metal oxide varistors, toroidal balanced chokes, ferrite rod-core inductors and VHF capacitors AC suppression components.UL1449 let through rating: 330 V, IEEE587 Cat. A ringwave let-through: Less than 35 volts, EMI/RFI filtering: 40 - 80 dB.Housing color: Light gray, Receptacle color: Black, Color (AC line cord): Light gray.Outlets measurement (center to center): Distance between horizontal outlets = 39.45 mm, Distance between vertical outlets = 39.30 mm.Keyhole slot mounting measurement (center to center): Distance between horizontal tabs = 131.90 mm, Distance between vertical tabs = 58.17 mm.Has space-saving right angle input plug.Weight: 2.4 lbs..Comes with lifetime limited warranty

TRIPP LITE IEC-C13/IEC-C19 12/2 Outlet 16 A 100 - 240 V Basic Power Distribution Unit offers reliable Rackmount power distribution. It supplies equipment with continuous power from any protected UPS, generator or mains input power source. High quality design includes rugged all-metal housing and secure Rackmount installation with included mounting accessories..Single phase NEMA 5-15/20P / NEMA L5-20P / NEMA L6-20P / IEC-320 C14/C20 10 ft 16 A 100 - 240 V input.100 - 240 V 50/60 Hz output.12 IEC-C13, 2 IEC-C19 outlet connector.16 A overload protection.1U horizontal rack mount.Package includes 1U rack mount PDU, 1U rack mount PDU, Set of 5 plug adapters, user manual with warranty information.Back panel grounding lug.14 outlets (4 C13 front-facing/2 C19 and 8 C13 rear-facing).Rack mount, vertical rack mount, wall mount/under-counter style.Form factors supported: 1U rack mount, 0U vertical mount, wall mount and under-counter mounting supported.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Typical applications: Ideal for network power distribution in datacenters, computer rooms and network closets.Pack of 5 included C19 adapters with locking retainer clip enables plug conversion to C14 (connects to C13 100-240V), L6-20P (connects to L6-20R 20A 208/240V), L5-20P (connects to L5-20R 20A 120V), 5-20P (connects to 5-20R 20A 120V) and 5-15P (connects to.Outlets center to center measurement: Distance between front (C13) outlets = 28.75mm, distance between rear (C19) outlets = 55mm, distance between rear (C13) outlets = 28.75mm.Certifications: Tested to UL60950-1 (USA), CSA (Canada), CE (EU).3.2 lbs.1 3/4"(H) x 17 1/2"(W) x 4 1/4"(D).Lifetime limited warranty.Space saving, ultra-compact housing with support for wall-mount, desktop or floor placement; built-in grounding lug.6' power cord; USB cable included.TRIPP LITE IEC-C13/IEC-C19 12/2 Outlet 16 A 100 - 240 V Basic Power Distribution Unit offers real-time local reporting of load level in amps via built-in digital display.

Extend the reach of your existing power cords with this office extension cord. The 15-foot length allows for flexible placement options, while the three outlets deliver power to multiple devices. Each outlet accepts three-prong plugs to accommodate a variety of computer components and other electronics. With a flat cord design, this GE extension cord secures easily to a wall with clips or tape..3-outlet power strip is great for office work stations requiring extended reach and extra outlets.15' power cord length.Comes in gray.Voltage rating of 125V, current rating of 13A, and power rating of 1625W.Right angle outlet orientation better accommodates large transformer plugs.For indoor use only.Meets or exceeds UL standard.Grounded to protect from accidental shock.Plug in sensitive equipment securely with this GE 15-foot three-outlet grounded office extension cord.

Bring powerful protection to your warehouse, a factory or another industrial workplace with this six-outlet power strip. The durable metal construction stands up to heavy wear and tear, while the 6-foot cord provides flexible placement options. A lit switch lets you cut the power to devices as needed. With integrated keyhole tabs, this Waber by Tripp Lite power strip mounts easily to a wall, workbench or floor..6-outlet power strip is great for office work stations requiring extended reach and extra outlets.6' power cord length.Comes in gray.Dimensions: 12.5"H x 2.5"W x 1.5"L.Features a circuit breaker that safeguards against circuit overloads that cause damage to the equipment.Voltage rating of 120V and current rating of 15A.Features an on-off switch; you can use it to turn off all power to your equipment before you leave your office at the end of each day or week.Metal housing stands up to the most demanding environments.Meets or exceeds cUL and UL 1363 standards.Lifetime manufacturer limited warranty.Power up heavy machinery and other heavy-duty items with this Waber-by-Tripp Lite six-outlet industrial power strip.

Tripp Lite Ultra 12-Outlet compact surge suppressor features diagnostic LEDs which indicate AC present, line fault and protection status. Surge suppressor includes 15' AC power cord and guarded power switch to reduce the risk of accidental shutoff..Input voltage: 120 VAC.Input connection: NEMA5-20P input plug.15' power cord.Dimensions: 1 3/4"(H) x 17 1/2"(W) x 4"(D).Surge energy rating: 3840 J.Output voltage: 120 VAC.Current: 20 A.Frequency: 50/60 Hz.Outlets: 12 x NEMA 5-20R.Form factor: 3U rack mountable.Protection type: Full normal mode (H-N) and common mode (N-G / H-G) line surge suppression.Material: Metal.Noise suppression: 40 - 80 dB EMI / RFI.Status indicators: Line fault, line ok, protection present.Compatibility: Sensitive electronic equipment in 19 inch rackmount, internetworking equipment, PC systems, telecommunications, audio/video, security, sound reinforcement.Load capacity: 2400 W.Certifications and standards: UL1449 (UR status), UL1283, cUL, exceeds IEEE 587 category AandB specifications.Warranty: Lifetime limited.Warranty: Lifetime limited.Tripp Lite Ultra 12-Outlet compact surge suppressor features network grade AC surge suppression with EMI/RFI noise filtering and has an energy rating of 3840 J.

Enhance power reliability and organization in your rack environment with this 1U 14‑Outlet Rackmount Power Distribution Unit. Designed for 19" server racks and cabinets, it provides a balanced combination of front‑facing and rear‑facing NEMA 5‑15 outlets to support both quick‑access devices and clean cable routing. The integrated 15A circuit breaker and 3,000‑joule surge protection safeguard connected equipment from overloads and power spikes, while the illuminated, covered power switch prevents accidental shutdowns. Built with durable SPCC steel and featuring an 8 ft (2.4 m) power cord, this TAA‑compliant PDU installs horizontally or vertically, making it an ideal choice for server rooms, AV setups, and IT deployments that require dependable, centralized power distribution..Operates on single‑phase power with a rack‑mount PDU design..Accepts 120V input with standard AC line frequency..Delivers up to 15A of output current for connected equipment..Fits a 1U rack space for compact installation..Uses a NEMA 5‑15 input plug for AC power connection..Provides 14 NEMA 5‑15 outlets across front and rear panels..Supports 14 outlets for high‑density equipment needs..Includes a 7.9 ft power cord for flexible rack placement..Not hot‑swappable for safety and device protection..Ships with brackets, cage nuts, rack screws, and documentation..Meets UL 1363 and EIA/ECA‑310‑E compliance standards..2‑year limited manufacturer warranty.

Tripp Lite™ Power distribution unit has a input/output voltage rating of 120 V and frequency rating of 50/60 Hz. Power distribution unit is rack mountable and supplies equipment with continuous power from any protected UPS..Single phase NEMA L5-30P 4.57m 30A 120 VAC input.50/60 Hz frequency.Outlet connector: 24 x NEMA 5-15R.Cord length: 15'.Output voltage: 120 V, Overload protection: 30 A.Number of power cords: 1.Maximum input current: 30 A, PDU input voltage 100, 120, 127 V, Voltage compatibility: 120 VAC, Power rating: 24.Dimensions: 1.75"(H) x 17.5"(W) x 4.5"(D).Outlets center to center measurement: Distance between Front outlets = 30.2mm, Distance between Rear outlets = 30.2mm, TVSS grounding: Back panel nut and bolt grounding lug.Style: Rackmount, vertical rackmount, wallmount/under-counter, Form factor supported: 1U rackmount, 0U vertical rackmount, wall-mount and undercounter installation supported.High quality design includes rugged all-metal housing and secure rackmount installation with included mounting accessories.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Supplies equipment with continuous power from any protected UPS, generator or mains input power source.Package contents: PDU2430 rackmount power strip, warranty information, instruction manual.Certifications and standards: Tested to UL60950-1 (USA) and CAN/CSA C22.2 No. 60950-1-03 (Canada), RoHS compliant.Weight: 3.3 lbs..Warranty: 5 years limited.Tripp Lite Power Distribution Unit - 120V Input/Output Rackmount

Simplify power needs with this power strip that contains six outlets to plug in laptops, televisions, and other electronics. UL and CSA-certified, this Kensington power strip has an on and off switch to turn multiple electronics off at once to save power..Six-outlet power strips are great for office work stations requiring extended reach and extra outlets.4' power cord length.Comes in gray.Dimensions: 12.75"H x 4.13"W x 1.63"L.Features an on-off switch; you can use it to turn off all power to your equipment before you leave your office at the end of each day or week.Meets or exceeds CSA and UL standards.Lifetime manufacturer limited warranty.Dimensions: 2.25"H x 13.5"W x 4.1"D.Room enough to easily accommodate up to six adapter-style plugs.Reliable.Simple power strip expands power outlets.Certifications and standards: UL and CSA certified.Lifetime limited warranty.Power up electronics with this Kensington power strip.

TRIPP LITE 5-15R 13 Outlet 15 A 100 - 127 V Metered Power Distribution Unit offers real-time local reporting of load level in amps via built-in digital meter. It enables visual current monitoring of PDU output current to prevent circuit overloads as additional equipment is added. It also offers reliable rackmount multi-outlet power distribution from any protected UPS, generator or mains input power source. High quality design includes rugged all-metal housing and secure rackmount installation with included mounting accessories..Single phase NEMA 5-15P 15 ft 15 A 100 - 127 V input.120 V 50/60 Hz output.13 NEMA 5-15R outlet connector.15 A overload protection.1U horizontal rack mount.Package includes PDUMH15 metered rack mount PDU, owner's manual with warranty information.Built-in 2 digit visual meter continuously reports PDU load level in amps.Back panel grounding lug.Rack mount, vertical rack mount, wall mount/under-counter style.Outlets center to center measurement: Rear Side = 30.20 mm.Form factors supported: 1U rack mount, 0U vertical rack mount, wall-mount, and under-counter installation.Digital LED current monitor display indicator.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Typical applications: Multi-outlet power distribution unit with digital current monitoring is the ideal means of powering multiple loads in 19 inch rack mount, wall-mount, and under-counter applications such as internetworking, PC systems, telecommunicati.Certifications: Tested to UL60950-1 (USA) and CAN/CSA C22.2 No. 60950-1-03 (Canada), RoHS Compliant.4.5 lbs.1 3/4"(H) x 17 1/2"(W) x 4 1/2"(D).Lifetime limited warranty.TRIPP LITE 5-15R 13 Outlet 15 A 100 - 127 V Metered Power Distribution Unit offers real-time local reporting of load level in amps via built-in digital display.

Power multiple devices efficiently with this 1U 12‑Outlet Rackmount PDU, designed for server rooms, AV environments, and IT deployments requiring organized and reliable power distribution. It features twelve NEMA 5‑15 right‑angle outlets that provide extra spacing to accommodate bulky power adapters without blocking adjacent ports. With six outlets on the front and six on the rear, the unit supports flexible equipment placement while maintaining clean cabling. A built‑in 15A circuit breaker protects connected hardware from overloads, while the illuminated, covered power switch prevents accidental shutoff. The 8 ft (2.4 m) power cord provides extended reach, and the included 4‑way mounting brackets allow horizontal or vertical installation in standard 19" racks at least 4" deep. Constructed from rugged SPCC steel, this TAA‑compliant PDU delivers dependable performance for always‑on IT environments..Runs as a single‑phase rack power distribution unit..Accepts 120V AC input for standard IT deployments..Supports up to 15A of output current..Fits a 1U rack footprint for compact mounting..Uses a NEMA 5‑15 input plug for power delivery..Provides 12 wide‑spaced NEMA 5‑15 outlets..Offers 12‑outlet capacity for dense rack loads..Includes a 7.9 ft cord for flexible positioning..Comes with brackets, screws, washers, and guide..Meets UL 1363 and EIA/ECA‑310‑E standards..2‑year manufacturer warranty.

The PS-415-HG Medical-Grade Power Strip supplies power outside of patient-care vicinities, such as administrative areas or in resident rooms of long-term care facilities that do not use line-operated electrical equipment for diagnostic, treatment or monitoring purposes. Compliant with UL 1363 specifications, this 120V, 50/60 Hz power strip features a NEMA 5-15P-HG hospital-grade plug and four NEMA 5-15R-HG hospital-grade outlets. The power strip is protected by a antimicrobial powder coating. Antimicrobial protection helps prevent the growth of bacteria, viruses, fungi, mold and mildew. The coating meets the requirements of JIS Z 2801:2000, an international standard for evaluating efficacy in antimicrobial products.A built-in resettable 15A circuit breaker controls power to all outlets and protects the power strip against overloads. Switchless design prevents the unit from being accidentally shut off. The 15-foot (4.6 m) cord provides ample reach to a power source. Keyhole mounting tabs and flanges make installing this power strip easy. The all-metal housing ensures safety and is guaranteed to last a long time in demanding surroundings..Ideal for use in administrative areas and resident rooms with no line-operated electrical equipment for diagnostic, treatment or monitoring purposes.4 NEMA 5-15R-HG hospital-grade outlets provide consistent power.Antimicrobial protection helps prevent the growth of bacteria, viruses, fungi, mold and mildew.15' Cord.Rugged, all-metal housing for long life in demanding environments.Switchless design prevents accidental shut-off.Input voltage: 120 VAC.Output voltage: 120 VAC.Input current: 15 A.Plug/connector type: NEMA 5-15P.Receptacles orientation: Single row 4.Frequency: 50/60 Hz.Circuit breaker: 15 A resettable.Rugged all-metal housing withstands years of use without breakage.Versatile power distribution strip.Certifications and standards: UL1363, cUL.Includes: Power strip 120V AC, PS-415-HG power strip, owner's manual and warranty information.Dimensions: 1.5"(H) x 8.65"(W) x 2.5"(D).Warranty: Lifetime limited.Tripp Lite Medical-grade power strip with patented antimicrobial coating and long 15 ft. cord provides safe, versatile power distribution.

TRIPP LITE 5-15R 8 Outlet 15 A 100 - 127 V Metered Power Distribution Unit provides a redundant power option for single-corded network devices. The dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. It enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. The ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. The front input LED's display primary or secondary power availability..Single phase NEMA 5-15P 12 ft 15 A 100 - 127 V input.120 V 60 Hz output.8 NEMA 5-15R outlet connector.1U horizontal rack mount form factor.Package includes PDU with attached 5-15P input power cord, detachable C13 to NEMA 5-15P 12 ft/3.6m secondary input cord, installable 1U mounting brackets, user manuals with warranty information.2 digit display reports output power consumption in amps.Super-fast switchover between primary and secondary power sources occurs in 2-7 milliseconds.Front panel LEDs confirm power availability on both input lines.Typical applications: Ideal means to provide single-corded network gear a redundant power option.ATS circuits normally maintain output sourced from the primary input cable, as primary input power fails or becomes unstable, the ATS will switch to maintain output sourced from the secondary input cable until power on the primary input is restored and st.ATS configurations enable fault-tolerant, hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system (in a two-UPS environment, the primary input cable must be supported.Advanced ATS configurations utilizing separate mains circuits, backup generators and even separate out of phase utility power grid feeds are fully supported.On-board ATS processor constantly evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or of lower quality than the primary source.Outlets are factory programmed for sequential turn-on at 250 millisecond intervals when the PDU is first energized to prevent inrush-related equipment interaction on startup.Indicator type: 10 front panel LEDs display power on - off status for each outlet, plus 3 LEDs for power status on each input line cord, digital current meter displays output power consumption in amps.Certifications: Tested to UL 60950-1 (USA), CSA (Canada), Class A (Emissions), NOM (Mexico), RoHS compliant.11 lbs.1 3/4"(H) x 17 1/2"(W) x 14 1/2"(D).2 years limited warranty.TRIPP LITE 5-15R 8 Outlet 15 A 100 - 127 V Metered Power Distribution Unit provides a redundant power option for critical networking equipment with a single input power cord.

TRIPP LITE 5-15R 16 Outlet 15 A 100 - 127 V Metered Power Distribution Unit offers real-time local reporting of load level in amps via built-in digital display. It enables visual monitoring of PDU load levels to prevent overloads as additional equipment is added. Also offers reliable rackmount multi-outlet power distribution from any protected UPS, generator or mains input power source. High quality design includes rugged all-metal housing and secure rackmount installation with included mounting accessories..Single phase NEMA 5-15P 15 ft 15 A 100 - 127 V input.120 V 50/60 Hz output.16 NEMA 5-15R outlet connector.15 A overload protection.0U vertical rack mount.Package includes PDUMV15 metered vertical PDU, mounting hardware and spare mounting buttons, owner's manual with warranty information.Includes 15A circuit breaker and lighted power switch inside a transparent protective cover.2 digit lighted meter reports combined total output current in amps.Toolless installation supported in button-mount compatible equipment racks.Vertical rack mount, wall mount, raceway, workbench style.Form factors supported: Vertical (0U) mounting in rack enclosures, horizontal mount in raceways and a variety of other applications.Digital LED current monitor display indicator.Certifications: Tested to UL60950-1 (USA) and CAN/CSA C22.2 No. 60950-1-03 (Canada), RoHS compliant.4.2 lbs.3"(H) x 48"(W) x 1 1/2"(D).Lifetime limited warranty.TRIPP LITE 5-15R 16 Outlet 15 A 100 - 127 V Metered Power Distribution Unit offers real-time local reporting of load level in amps via built-in digital display.

Tripp Lite Switched PDU offers advanced network control and monitoring with the ability to turn on and off. PDU features 16 switched outlets that can be controlled in real-time to remotely reboot unresponsive network hardware..Input voltage: 120 VAC.Output voltage: 120 VAC.Supports power-on, power-off or reboot of each outlet on a real-time or programmable basis.PDU type: Switched.Frequency: 50/60 Hz.Input receptacles: NEMA 5-15P.Output receptacles: 16 x NEMA 5-15R.Form factor: Horizontal rackmount, vertical rackmount.Dimensions: 1 3/4"(H) x 17 1/2"(W) x 15 1/2"(D).Appearance: Black 1U rackmount steel chassis.Management protocols: HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, Telnet, FTP, DHCP, BOOTP, NTP.Front panel LEDs: 16 LEDs display power on - off status for each outlet, digital current meter display shows total output power consumption in amps.Includes: Switched PDUMH15NET 16-outlets PDU, installable 1U mounting brackets, PowerAlert software CD, cord retention Bbrackets, user manual.Certifications: Tested to UL 60950-1 (USA, Canada), class A (Emissions), NOM (Mexico), RoHS compliant.Weight: 12.5 lbs..Warranty: 2 years limited.Tripp Lite Switched PDU has input/output AC voltage of 120 V and maximum input current of 15 A operating at a frequency of 60 Hz and weighs around 12.5 lbs.

Tripp Lite 8-Outlet isobar surge protector has exclusive isolated filter banks that eliminate interference between components. Surge protector features multi-component suppression circuits..Light gray(Housing), black(receptacle).Input voltage: 120 VAC (110-125 VAC).Input connection: NEMA 5-15P input plug.12' power cord.3840 joules.8 outlets, Metal, Style: Strip.EMI / RFI filtering: 40 -80 dB, Frequency: 50/60 Hz.Output: 1440 W, Circuit breaker: 12 A, Maximum surge amps: 150000, Clamping voltage (RMS): 140, AC suppression surge current rating: 97,000 amps.Applications: Ideal for premium protection of personal computers with peripherals, network and CAD/CAM/CAE workstations, internetworking accessories, telecommunications systems, point of sale equipment, audio/video and home theater systems.Combination AC circuit breaker and two position red illuminated on/off power switch, 3 LED indicators confirm suppressor operation and site wiring status, plus warning of suppressor or electrical fault conditions.Keyhole mounting tabs allow permanent installation.AC line cord with space-saving angled input plug, outlets arranged in four filter banks prevent system crashes, reboots and performance problems common as noisy peripherals are powered off and on.Multi-component suppression circuits combine toroidal chokes, ferrite rod-core inductors, HF/VHF capacitors and multiple layers of metal oxide varistors into exclusive isolated filter banks that remove EMI/RFI interference.Widely spaced outlets accommodate up to 4 large transformer plugs without blocking outlets, protects personal computers and peripherals.Includes full normal mode (H-N) and common mode (N-G / H-G) line surge suppression.Robust surge suppression with sine-wave tracking protects against the heaviest of surge conditions, exceeding IEEE category Aan dB specifications and reducing 6,000 V test surges to harmless levels less than 35 volts.Certifications and standards: UL, ROHS, cUL, exceeds IEEE 587 category A and B specifications.Weight: 3.7 lbs..Lifetime limited, $50000 ultimate lifetime insurance.Package contents: ISOBAR8ULTRA premium surge protector, set of 4 outlet safety covers, instruction manual with warranty information.Tripp Lite 8-Outlet isobar surge protector removes damaging line noise with its isolated filter banks and offers 3330 J of protection against surges.

TRIPP LITE 5-15/20R 16 Outlet 20 A 100 - 127 V Metered Power Distribution Unit provides a redundant power option for single-corded network devices. The dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. It enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. The ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. The front input LED's display primary or secondary power availability..Single phase NEMA 5-20P / NEMA L5-20P 12 ft 20 A 100 - 127 V input.120 V 60 Hz output.16 NEMA 5-15/20R outlet connector.1U horizontal rack mount form factor.Package includes PDU with attached L5-20P primary input cord, detachable C19 to NEMA L5-20P secondary input cord, set of two L5-20R to 5-20P plug adapters, 1U mounting brackets, user manual with warranty information.2 digit display reports output power consumption in amps.Super-fast switchover between primary and secondary power sources occurs in 2-7 milliseconds.Front panel LEDs confirm power availability on both input lines.Typical applications: Ideal means to provide single-corded network gear a redundant power option.ATS circuits normally maintain output sourced from the primary input cable, as primary input power fails or becomes unstable, the ATS will switch to maintain output sourced from the secondary input cable until power on the primary input is restored and st.ATS configurations enable fault-tolerant, hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system (in a two-UPS environment, the primary input cable must be supported.Advanced ATS configurations utilizing separate mains circuits, backup generators and even separate out of phase utility power grid feeds are fully supported.On-board ATS processor constantly evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or of lower quality than the primary source.Outlets are factory programmed for sequential turn-on at 250 millisecond intervals when the PDU is first energized to prevent inrush-related equipment interaction on startup.Indicator type: 16 front panel LEDs display power on - off status for each outlet, plus 2 LEDs for power status on each input line cord, digital current meter display shows total load consumption of connected equipment in amps.Certifications: Tested to UL 60950 (USA, Canada), Class A (Emissions), NOM (Mexico), RoHS complaint.12.2 lbs.1 3/4"(H) x 17 1/2"(W) x 14 1/2"(D).2 years limited warranty.TRIPP LITE 5-15/20R 16 Outlet 20 A 100 - 127 V Metered Power Distribution Unit provides redundant power option for critical networking equipment with a single input power cord.

TRIPP LITE 5-15R 8 Outlet 15 A 100 - 127 V Switched Power Distribution Unit provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Switched PDU features include individually controllable output receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. It enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. The ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. The front input LED's display primary or secondary power availability..Single phase NEMA 5-15P 12 ft 15 A 100 - 127 V input.120 V 60 Hz output.8 NEMA 5-15R outlet connector.1U horizontal rack mount form factor.Package includes PDU with attached 5-15P input power cord, detachable C13 to NEMA 5-15P 12 ft/3.6m secondary input cord, installable 1U mounting brackets, user manuals with warranty information.Visual meter reports output power consumption in amps.ATS features provide redundant power for critical network equipment with a single input power cord.Switched PDU features enable programmable or real-time power control of individual outlets via built-in network interface.Advanced ATS configurations using separate mains circuits, backup generators and out of phase utility feeds are fully supported.2-7 millisecond transfer time between primary and secondary inputs.Front panel LEDs confirm power availability on primary/secondary inputs and each output receptacle.ATS configurations enable hot-swappable UPS protection when used with a single UPS and redundant UPS protection when each input is connected to a separate UPS system.On-board processor evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or of lower quality than the primary source.Outlets are factory programmed for sequential turn-on at 250 millisecond intervals as the PDU is first energized.Typical applications: ATS PDU systems provide a redundant power option with individual outlet control for single-corded network devices.DHCP/Manual configuration support, supports HTTP, HTTPS, PowerAlert network management system, SMTP, SNMPv1, SNMPv2, Telnet, SSH, FTP, DHCP, BOOTP, NTP protocols.Certifications: Tested to UL 60950-1 (USA, Canada), Class A (Emissions), NOM (Mexico), RoHS compliant.11 lbs.1 3/4"(H) x 17 1/2"(W) x 14 1/2"(D).2 years limited warranty.TRIPP LITE 5-15R 8 Outlet 15 A 100 - 127 V Switched Power Distribution Unit's ATS features provide redundant power for critical network equipment with a single input power cord.

Tripp Lite PDU1220T Power Distribution Unit, 120 VAC Input/Output.Single phase NEMA L5-20P 4.57m 20A 120 VAC input.50/60 Hz frequency.Outlet connector: 13 x NEMA 5-15R, NEMA 5-20R.Cord length: 15'.Output voltage: 120 V, Overload protection: 20 A.Number of power cords: 1.PDU input voltage 100, 120, 127V, Voltage compatibility: 120 VAC, power rating: 20.Dimensions: 1.75"(H) x 17.5"(W) x 4.5"(D).Outlets center to center measurement: 30.2mm.Style: Rackmount, vertical rackmount, wallmount/under counter, Management: Browser, CLI, SNMP, serial or IP.1U horizontal rackmount format installs in one rack space, back panel grounding lug, high quality design includes rugged all-metal housing and secure rackmount installation with included mounting accessories.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall mount and under counter installation formats.Supplies equipment with continuous power from any protected UPS, generator or mains input power source.Compatibility: Distribution of UPS, generator or commercially derived AC power to protected equipment.Package contents: PDU1220T rackmount power strip, instruction manual and warranty information.Certifications and standards: Tested to UL60950-1 (USA), CSA-C22.2 (Canada), cUL, ROHS.Weight: 5.2 lbs..Warranty: 5 years limited.Tripp Lite Power Distribution Unit - Consolidate Your Power Source

TRIPP LITE 5-15/20R 28 Outlet 20 A 100 - 127 V Metered Power Distribution Unit offers real-time local reporting of load level in amps via built-in digital display. It enables visual monitoring of PDU load levels to prevent overloads as additional equipment is added. Also offers reliable rackmount multi-outlet power distribution from any protected UPS, generator or mains input power source. High quality design includes rugged all-metal housing and secure rackmount installation with included mounting accessories..Single phase NEMA 5-20P / NEMA L5-20P 15 ft 20 A 100 - 127 V input.120 V 50/60 Hz output.28 NEMA 5-15/20R outlet connector.20 A overload protection.0U vertical rack mount.2 digit lighted meter reports combined total output current in amps.Package includes PDUMV20 metered vertical PDU, (1) L5-20P to 5-20P plug adapter, mounting hardware and spare mounting buttons, instruction manual with warranty information.Includes 20 A circuit breaker and lighted power switch inside a transparent protective cover.Digital ammeter display indicator.Toolless installation supported in button-mount compatible equipment racks.Bolt-down installation brackets support installation in other racks and additional surfaces.Typical applications: Ideal means of powering networking equipment in datacenters, computer rooms and network closets.Certifications: Tested to UL60950-1 (USA) and CAN/CSA C22.2 No. 60950-1-03 (Canada), RoHS compliant.6 lbs.1 3/4"(H) x 60"(W) x 1 1/4"(D).Lifetime limited warranty.TRIPP LITE 5-15/20R 28 Outlet 20 A 100 - 127 V Metered Power Distribution Unit offers real-time local reporting of load level in amps via built-in digital display.

TRIPP LITE 5-15/20R 12 Outlet 20 A 100 - 127 V Metered Power Distribution Unit offers real-time local reporting of load level in amps via built-in digital meter. It enables visual current monitoring of PDU output current to prevent circuit overloads as additional equipment is added. Also offers reliable rackmount multi-outlet power distribution from any protected UPS, generator or mains input power source. High quality design includes rugged all-metal housing and secure rackmount installation with included mounting accessories..Single phase NEMA 5-20P / NEMA L5-20P 15 ft 20 A 100 - 127 V input.120 V 50/60 Hz output.12 NEMA 5-15/20R outlet connector.20 A overload protection.1U horizontal rack mount.Package includes PDUMH20 metered rack mount PDU, L5-20R to 5-20P plug adapter, owner's manual with warranty information.Built-in 2 digit visual meter continuously reports PDU load level in amps.Back panel grounding lug.Rack mount, vertical rack mount, wall mount/under-counter style.Outlets center to center measurement: 30.20 mm.Form factors supported: 1U rack mount, 0U vertical rack mount, wall-mount, and under-counter installation.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Typical applications: Multi-outlet power distribution unit with digital current monitoring is the ideal means of powering multiple loads in 19 inch rack mount, wall-mount, and under-counter applications such as internetworking, PC systems, telecommunicati.Certifications: Tested to UL60950-1 (USA) and CAN/CSA C22.2 No. 60950-1-03 (Canada), RoHS compliant.3.6 lbs.1 3/4"(H) x 17 1/2"(W) x 4 1/2"(D).Lifetime limited warranty.TRIPP LITE 5-15/20R 12 Outlet 20 A 100 - 127 V Metered Power Distribution Unit is made of rugged steel casing, and built in circuit breaker to ensure maximum durability.

Tripp Lite Premium Isobar® 6-Outlet 3330 surge protector provides premium surge protection for all electrical devices..6-outlet.6' cord length.97,000 rating.Exclusive isolated filter banks eliminate interference between your connected equipment.Unit safely filters EMI/RFI noise from 40 to 80 dB.Three diagnostic LEDs vividly alert you to potential power problems. Ultimate Lifetime Insurance (USA and Canada only) safeguards all your connected equipment.UL/cUL Listed for added peace of mind.Robust surge suppressor with sine-free tracking exceeds IEEE 587 Category A and B specifications.Robust surge suppressor with sine-free tracking exceeds IEEE 587 Category A and B specifications.Combination AC circuit breaker and two position red illuminated on/off power switch, 3 LED indicators confirm suppressor operation and site wiring status, plus warning of suppressor or electrical fault conditions.Keyhole mounting tabs for installation in a variety of applications.AC line cord with space-saving angled input plug, outlets arranged in three filter banks prevent system crashes, reboots and performance problems common as noisy peripherals are powered off and on.Multi-component suppression circuits combine toroidal chokes, ferrite rod-core inductors, HF/VHF capacitors and multiple layers of metal oxide varistors into exclusive isolated filter banks that remove EMI/RFI interference.Widely spaced outlets accommodate up to 4 large transformer plugs without blocking outlets, protects personal computers and peripherals.Includes full normal mode (H-N) and common mode (N-G / H-G) line surge suppression.Robust surge suppression with sine-wave tracking protects against the heaviest of surge conditions, exceeding IEEE category Aan dB specifications and reducing 6,000 V test surges to harmless levels less than 35 volts.Certifications and standards: UL, ROHS, cUL, exceeds IEEE 587 category A and B specifications.Weight: 2.925 lbs..Lifetime limited, $50000 ultimate lifetime insurance.Package contents: ISOBAR6ULTRA premium surge protector, set of 4 outlet safety covers, instruction manual with warranty information.Safety Data Sheet.Tripp Lite Premium Isobar® 6-Outlet 3330 surge protector provides premium surge protection for all electrical devices.

12-outlet surge protector safeguards your home/office electronics against dangerous surges, spikes and line noise.12 total NEMA 5-15R outlets-6 are designed to accommodate bulky transformers.4320 joules protect your valuable electronics against dangerous surges/spikes/line noise.RJ11 and coaxial cable connectors protect phone/fax/modem/cable/satellite equipment

Safeguard your home and office electronics with the CyberPower Home Office 7-Outlet Surge Protector. Featuring 2000 joules of surge protection, this power strip shields devices from power fluctuations, spikes, and electrical surges. Designed for convenience, it includes 7 grounded AC outlets and 2 USB-A ports with 2.4A shared output, making it easy to charge mobile devices alongside traditional plugs. The 4-foot power cord with a flat plug ensures flexibility for placement behind furniture, while its impact-resistant casing enhances durability. Additional features such as automatic shutdown technology, EMI/RFI noise filtering, and keyhole mounting slots provide reliable protection and easy installation. Perfect for home offices, entertainment setups, and everyday device charging, this surge protector delivers peace of mind with advanced power safety..7 AC Outlets: Expand one grounded outlet into seven grounded outlets..Surge Protection: Diverts excess voltage away from sensitive electronic equipment during an AC power surge or power spike to prevent damage..USB-A Charge Ports: Charge USB devices such as tablets, smartphones, and other mobile accessories..Impact-Resistant Casing: Ensures maximum durability and prolongs the life of the product..One Year Limited Warranty: Covers defects in materials and workmanship in the product under normal use and conditions within one year of the purchase date. See warranty for details..WARNING: This product can expose you to chemicals including Styrene, which are known to the State of California to cause cancer, and Bisphenol A (BPA), which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

10 OUTLET SURGE SUPPRESSOR.Surge protector provides 3345 joules of protection for both home and office electronics.Features 10 power NEMA 5-15R outlets and protects phone line, cable TV.Dimensions: 11.6"H x 5"W x 2.25"D Cord length: 8'.AC 120 input voltage.Meets or exceeds cUL, UL 1363, UL 497A, FCC Part 68, RoHS, UL 1449 Third Edition, and IEEE 587 standards.EMI/RFI noise filtering reduces line noise that can cause data loss and keyboard errors.Comes in black.Lifetime manufacturer limited warranty.Keep electronic devices safe from damage with this Tripp Lite Protect It! ten-outlet black surge protector.

Tripp Lite Power strip with 6 outlets can detect a fault condition and interrupt current flow with its built-in resettable circuit breaker. Power strip is featured with switchless design which prevents accidental shut off..Rugged all-metal housing withstands years of use without breakage.6 x NEMA 5-15R-HG hospital-grade output receptacles.15-ft AC cord with integrated, molded NEMA 5-15P-HG hospital-grade plug.Optional-use keyhole mounting tabs and flanges.Switchless design prevents accidental shutoff.15A electrical capacity with built-in resettable circuit breaker.120V, 50/60Hz electrical compatibility.Certified by UL (USA) and cUL (Canada).15' AC cord with integrated, molded NEMA 5-15P-HG hospital grade plug.Optional use keyhole mounting tabs and flanges, switchless design prevents accidental shutoff.AC power distribution with hospital grade receptacles and plug where durability and reliability are required.Certifications: UL1363 (series number: AGIB12015SL), cul (series number: AGIB12015SL).Warranty: Lifetime limited.Tripp Lite Power strip with 6 outlets provides surge protection and features an integrated 15' AC cord.

TRIPP LITE 5-15/20R 32 Outlet 40 A 100 - 127 V Metered Power Distribution Unit provides an efficient and manageable power distribution solution for multiple servers with dual redundant power supplies, or any other application that requires numerous outlets, high capacity, and a compact form factor. The dual input current monitoring display shows AC power consumption for each independent circuit. Switchless design eliminates accidental shutoff of connected equipment. Unfiltered electrical pass-through without a power switch makes the PDUMV40 ideal for distributing alternate waveform UPS or generator power in rack enclosures, network closets, and more. Each of two independent circuits' supports 16 outlets and equipment loads up to 2,400 watts 32 outlets and 4,800 watts total capacity without consuming additional rack space..Single phase NEMA 5-20P / NEMA L5-20P 10 ft 40 A 100 - 127 V input.120 V 50/60 Hz output.32 NEMA 5-15/20R outlet connector.40 A overload protection.0U vertical rack mount.Package includes PDUMV40 dual vertical circuit/metered PDU, mounting hardware, two NEMA L5-20P to 5-20P plug adapters, owner's manual with warranty information.All-in-one Zero U form factor enables efficient, single-enclosure installations.Dual independent circuit design delivers high capacity across 32 outlets in minimal space.Switchless design prevents accidental shutdown of connected equipment.Dual digital current monitoring displays (1 for each circuit).Vertical rack mount, wall mount, raceway, workbench style.Form factors supported: Zero U vertical rack mount, wall-mount, raceway, workbench and more.Toolless mounting supported in button-mount compatible racks, plus nut-and-bolt mounting brackets for other mounting applications.Combines the advantages of two separate high-current PDU's without the extra expense, increased space requirements and added management complexity.Input plugs, input power cords, breakers and outlets are color-coded to match each independent 20A circuit, allowing simplified cable management for multi-server configurations.Typical applications: Ideal means of powering servers and networking equipment with dual redundant power supplies and other applications requiring numerous outlets, high capacity and a compact form factor.Certifications: Tested to UL60950-1 (USA) and CAN/CSA C22.2 No. 60950-1-03 (Canada), RoHS compliant.8.2 lbs.3"(H) x 71 1/4"(W) x 1 1/2"(D).Lifetime limited warranty.TRIPP LITE 5-15/20R 32 Outlet 40 A 100 - 127 V Metered Power Distribution Unit comes with rugged steel casing to ensure maximum durability.

Tripp Lite Strip Surge Suppressor, 6 Outlets, 790 Joules.6 outlets.790 joules.6'L cord.Offers economical AC surge suppression for protection of workstations, desktop PCs, telecom systems, and other sensitive electronics.EMI/RFI noise filtering.Diagnostic LED confirms surge suppression is present.Keyhole support for wall mounting.Up to $20,000 connected equipment protection.Lifetime manufacturer limited warranty.Supports 1 large transformer plug accessory without covering remaining outlets, accepts up to 3 transformers total, built in LED confirms suppressor protection present (green) status.EMI/RFI noise filtering, combination AC circuit breaker and 2 position red illuminated on/off power switch.15A resettable illuminated combo switch/circuit breaker, single row of 6 outlets.Distance between slots 101 mm, distance between slot height 28 mm, outlets center to center measurement 28.5 mm.Application: Ideal for any desktop, network or home computing application requiring AC line protection.Includes: TLP606B surge suppressor, instruction manual with warranty information.Standards and certificates: UL 1449 3rd edition, UL1363, IEEE 587, RoHS, cUL.Weight: 1.01 lbs..Warranty: Lifetime limited.Tripp Lite Protect It! Six-Outlet 790-Joule Surge Suppressor - Superb Protection, Convenient Design

The Tripp Lite TLP806TEL Protect It! 2160 J surge protector prevent surges from damaging your modem/fax/phone equipment. It features space-saving right angle input plug with integrated 15 A circuit breaker for power control and overload protection. This protector has attractive black suppressor housing with keyhole mounting tabs for versatile placement options. It has 8 AC outlets with room for two transformer plugs without blocking outlets covers computers and all peripherals. The diagnostic LEDs of this surge protector, confirm outlet grounding and surge suppression status..2160 J energy rated surge protector restricts surges from damaging your modem/fax/phone equipment.Receptacles: Eight NEMA 5-15R, Input plug/connector type: NEMA 5-15P space-saving right angle input plug with integrated 15 A circuit breaker.Dimensions: 12.4"H x 2"W x 1.74"D, Cord length: 6'.Material: Black plastic, Conductor size: 14-Gauge, Cord type: SJT input.Input voltage: 120 VAC, Output voltage: 120 VAC, Maximum line current: 15 A.Automatic shutoff cuts power to outlets when the protection circuit is not working, AC suppression joule rating: 2160.Output: 1800 W, Maximum surge current: 144000 A.Attractive black suppressor housing with keyhole mounting tabs permit versatile placement options, contains built-in sliding outlet safety covers.Clamping voltage: 150 V (RMS).Through rating: 330/400/400 V.EMI/RFI filtering: Up to 40 dB.Built-in cord management for added convenience.8 AC outlets with room for two transformer plugs without blocking outlets covers computers and all peripherals.Contains TLP806TEL, 6' telephone cord and instruction manual with warranty information.Meets UL, FCC Part 68, cUL and Exceeds IEEE 587 category A&B specifications certifications and standards.Comes with lifetime limited warranty

Protect your electronics with the CyberPower Home Office 8-Outlet Surge Protector. Featuring 2700 joules of surge suppression, this power strip safeguards devices from power spikes and electrical surges. It includes 8 surge-protected outlets, with 2 widely spaced for bulky plugs, and 2 USB ports with 2.4A shared output for convenient charging of mobile devices. The 6-foot power cord with a low-profile plug allows flexible placement, while automatic shutdown technology ensures safety by cutting power during overloads. Additional features include EMI/RFI noise filtering, impact-resistant casing, and keyhole mounting slots for easy installation. Ideal for home offices, entertainment setups, and everyday device charging, this surge protector delivers reliable power protection..Surge Protection: Diverts excess voltage away from sensitive electronic equipment during an AC power surge or power spike to prevent damage..Automatic Shutdown: Protects connected electronics with the integrated circuit breaker which automatically switches off in the event of an overload that exceeds the model's ability to suppress the signal..EMI/RFI Noise Filter: Maintains clean power for connected equipment by filtering out electromagnetic and radio frequency interference to improve picture and sound quality..Metal Oxide Varistor (MOV) Technology: Allows normal current to pass through the device, while diverting any surges/spikes through the ground circuit, to safeguard connected electronics and the surge suppressor..USB Charge Ports: Rapidly charge and power USB devices such as tablets (including iPad), smartphones, MP3 players, and other mobile accessories..Impact-Resistant Casing: Ensures maximum durability and prolongs the life of the model..Connected Equipment Guarantee: CyberPower will repair or replace properly connected equipment if it is damaged by a power surge..1 Year Limited Warranty: Covers defects in materials and workmanship in the product under normal use and conditions. See warranty for details..WARNING: This product can expose you to chemicals including Styrene, which are known to the State of California to cause cancer, and Bisphenol A (BPA), which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

This 1U rackmount power distribution unit (PDU) provides unfiltered power distribution to 10 NEMA 5-15 receptacles from a UPS system, generator, or utility power source. Designed for electrically demanding IT or industrial environments, the CPS1215RM has durable metal housing and network-grade plugs and outlets. A 15-foot AC power cord allows the PDU to be placed where it's needed and a cord retention tray secures power cords, keeping them organized and accessible. The CPS1215RM Basic PDU also comes with a three-year warranty..Rack Mountable (1U) PDU that delivers AC power to servers, equipment, and connected devices..Input voltage: 120 VAC, 50Hz/60Hz.Power capacity: 1.8 kVA, 15-Amp electrical capacity with circuit breaker.Product Dimensions are 17.25"W x 1.75"H x 4.75"D with a Cord Length of 15 ft (4.5 m)..This PDU has a Nominal Input Voltage of 100 VAC - 125 VAC and uses an input plug type NEMA 5-15P..Output voltage: 120 VAC (60 Hz)Plug/connector type: NEMA 5 15P straight, Receptacles: 10 x NEMA 5 15R (Output).Meets or exceeds UL & RoHS.Provides shielding against electromagnetic interference & radio frequency signals. Most commonly, this is used to prevent line noise or humming that occurs over telephone lines or stereo electronics.Warranty: 3 Year Limited Warranty.Compatibility: PC.Certifications and standards: UL, RoHS.Includes: CPS 1215RM unit, warranty card/manual.Weight: 4.90 lbs..Deliver reliable power to multiple devices with the CPS1215RM Basic PDU from CyberPower, your trusted ally in power.

The Tripp Lite PDUMV20-72 1.9 kW single-phase metered PDU provides real-time local reporting of load level in amps through built-in digital display. This PDU provides multi-outlet power distribution from any protected UPS, generator or mains input power source. It features rugged all-metal housing, 36 NEMA 5-15/20R output receptacles and offers secure rackmount installation with included mounting accessories. This PDU comes with NEMA L5-20P input plug with 15' line cord and 5-20P adapter. It contains 20 A circuit breaker and lighted power switch inside a transparent protective cover..Power distribution unit offers reliable and cost effective power distribution.Dimensions: 72"(H) x 1.8"(W) x 1.3"(D).Metal construction for long lasting durability.Receptacles: NEMA L5-20P input and 36 x NEMA 5-15/20R output.Voltage: 120 VAC at 50/60 Hz input/output, Input current: 20 A.Output capacity: 1.9 kW.Input cord length: 15'.Form factor: Vertical.Offers overload protection.Enables visual monitoring of PDU load levels to avoid overloads.Provides reliable rackmount multi-outlet power distribution from any protected UPS, generator or mains input power source.High-quality design incorporates rugged all-metal housing and secure rack mount installation with available mounting accessories.Meets UL60950-1 (USA), UL/CSA60950-1 (Canada), NOM (Mexico), FCC Class A (Emissions), RoHS standards or certifications.Weight: 5.51 lbs..Comes with 2 years limited warranty

Tripp Lite 12-Outlet surge suppressor with 15' power cord has 2 diagnostic LEDs to indicate protection and ground status. Surge suppressor includes adjustable rack-mount hardware which helps to easily mount on wall or rack..Black.Input voltage: 120 VAC (110-125 VAC).Input connection: NEMA 5-15P input plug.15' power cord.3840 joules.12 outlets, Metal, Style: Rack mount.EMI / RFI filtering: 40 -80 dB, Frequency: 50/60 Hz.Output: 1800 W, Circuit breaker: 15 A, Maximum surge amps: 150000, Clamping voltage (RMS): 140, AC suppression surge current rating: 96,000 amps.Red illuminated power switch controls power to all outlets, diagnostic LEDs confirm AC present (green), line fault (red) and protected (green).Lighted power switch confirms power on/off status.Snap-in switch guard prevents accidental turn off.Versatile all-metal cabinet with detachable mounting flanges allows rack mount, wall mount, under-counter and other creative mounting options.Outlets are arranged in exclusive isolated filter banks to limit noise interaction among connected items, protects sensitive electronic equipment.Includes full normal mode (H-N) and common mode (N-G / H-G) line surge suppression.Uses one rack space (1U) in standard 19 inch rack (zero U mounting possible in many racks) 3840 joules/96,000 amp network-grade AC surge suppression with EMI/RFI filtering.Certifications and standards: UL, ROHS, cUL, exceeds IEEE 587 category A and B specifications.Weight: 5.8 lbs..Lifetime limited, $25000 ultimate lifetime insurance.Applications: Ideal for the protection of sensitive electronic equipment in 19" rackmount, wallmount and under-counter applications, such as internetworking equipment, PC systems, telecommunications, audio/video, security, sound reinforcement.Package contents: ISOBAR12ULTRA surge protector, warranty information, instruction manual.Tripp Lite 12-Outlet surge suppressor with 15' power cord protects all electronic equipments against surges, spikes or line noise and features high suppression rating of 3,840 J to handle the strongest surges.

he Furman PST-8D Digital Power Station features Furman's SMP circuitry which incorporates Linear Filtering Technology (LiFT) and a high current TVZ-MOV to insure that any electronic device is fed clean, filtered AC power. This dramatically reduces noise, ensuring consistent peak performance from all equipment. Furman's proprietary Linear Filtering Technology (LiFT) suppresses AC noise evenly, assuring maximum performance from your system. SMP circuitry offers the highest degree of protection against electrical surges and spikes, and does this without sacrificing itself or any of its components. In addition, the Extreme Voltage Shutdown circuit automatically turns off the unit when it is fed 135 VAC or higher, protecting itself and connected equipment from the extreme voltage..Delivers advanced non-sacrificial SMP+ surge suppression in a heavy-duty indoor power strip designed for professional-grade performance..Includes eight isolated outlets divided into digital/video and analog banks for optimized filtering..Features a long 9-foot power cord for flexible placement in studio or home setups..Delivers robust surge absorption capacity, typically rated around 1800 joules for extended protection..Operates directly from AC mains power without battery backup, ensuring continuous conditioning..Supports 120 volts at up to 15 amps, handling approximately 1.8 kilowatts of connected load..Measures roughly 12 inches in height, 5 inches in width, and 2 inches in depth for compact installation..Built with a rugged metal chassis and equipped with LED indicators for protection and voltage status..Incorporates LiFT noise filtering, EVS over-voltage shutdown, and coax/telco surge protection for comprehensive safety..Complies with industry safety norms and is typically UL-listed for electrical reliability..Limited 3-Year Manufacturer Warranty

The Furman PST-6 Digital Power Station provides advanced surge suppression with zero ground contamination. This offers superior protection over a standard power strip, and helps to smooth out the peaks and dips of common household AC power. It creates smooth power for precision electronics such as home theater components, computers, and sound equipment..Empowering devices with advanced surge suppression provides dependable spike protection while delivering a convenient indoor power‑strip design..Featuring six filtered outlets provides ample connectivity for multiple components..Extending an eight‑foot cord offers flexible placement in varied setups..Operating via a 120‑volt AC mains source eliminates the need for any runtime‑based power system..Measuring at 2.7" × 3.3" × 13.5" allows easy integration into compact spaces..Constructed with a durable aluminum chassis and a simple status LED ensures longevity and clear protection indication..Aligning with C‑UL safety compliance requirements reinforces reliable electrical protection standards..Limited 1-Year Manufacturer Warranty.WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Whoever said good things come in small packages must have been talking about the 6-Outlet Surge Protector w/USB by GoGreen Power. Designed for peak performance for users on the go, the 6-Outlet Surge Protector w/USB by GoGreen protects your electronics while giving you that much-needed place to park your phone, tablet, or other USB devices for charging. ​The GoGreen 6-Outlet Surge Protector w/USB sports a 15 amp, 1875 watt circuit breaker providing an incredible 1,600 joules of simultaneous protection for five standard outlets, one large adapter, and two USB ports at once. The compact design includes an indicator light verifying you have active protection at all times, and industry standard EMI/RFI shielding means you'll never have to wonder about performance or safety. With a right-angle plug and a six-foot cord, the GoGreen 6-Outlet Surge Protector w/USB puts power and protection right at your fingertips. And with the environmentally-friendly design of all GoGreen products, you can focus on the task at hand knowing your computers, appliances, and other electronic devices are safe and sound..Protects electronics during a power outage.5 standard outlets, 1 large adapter, 2 USB ports.15 amp circuit breaker (1875 watts).1600 joules of protection.EMI/RFI.Indicator light confirms operation.6-foot cord.Right-angle plug.Heavy duty structure.The GoGreen Power 6 Outlet Surge Protector provides premium power protection along with your USB attached items.

Cyberpower® Essential CSB706 7 Outlet 1500 Joule Surge Protector With 6' Cord.Input voltage: 125 V.Input connection: NEMA 5-15P input plug.6' cord.Surge energy rating: 1500 J.Total outlets: 7.Plug style: Straight.Current: 15 A line current.Form factor: Floor/wall mountable.Frequency: 60 Hz.Filtering: EMI/RFI filtering: 150 kHz - 100 MHz.Circuit breaker: 15 A resettable.Power switch: Non lighted on/off reset.Response time: less-than 1 ns, Attenuation: Up to 32 dB.Surge current: 60,000 A(max), Surge current H-N: 30,000A(max), Surge current H-G: 15,000A(max), Surge current N-G: 15,000A(max), Clamping voltage: 400 V.Compatibility: Computers, printers, stereos, phones, fax, modems.Includes CSB706 7-outlets surge suppressor with 1500 J, and 6' cord, user manual.Certification and Standards: UL1363 / UL1449 3rd Edition, cUL, RoHS.Warranty: Lifetime limited.CyberPower® Essential 7 Outlets 1500 Joule surge protector with 6' cord uses MOV technology to pass normal current through the device and includes keyhole slots for easy installation.

The Vertiv Geist Basic Rack PDU family delivers reliable power distribution at a competitive price point. The Vertiv Geist Basic Rack PDU is the entry-level solution in the Vertiv Rack PDU family, providing basic, reliable power distribution in all IT environments. Vertiv Geist Basic Rack PDUs are UL-listed, meeting an important requirement for many data centers and insurance providers. Vertiv Geist Basic Rack PDUs are not batch-tested. Every unit is tested individually for reliability and functionality before shipping. All Vertiv Geist Basic Rack PDUs come with a standard three-year warranty with an automatic upgrade to five years if the product is registered within 120 days of purchase. The addition of a local display or inline meter enables instant power usage feedback, which can help avoid overloads and costly downtime. This model (VP9562) is 15A, 120V, 1.4kW in a horizontal form factor, with 10 NEMA 5-15R outlets..The Vertiv Geist Basic Rack PDU provides reliable power distribution at a low price point.All Vertiv Geist Basic Rack PDUs are individually tested for reliability and functionality - no batch tests..Vertiv Geist Basic Rack PDUs are UL listed in accordance with common data center and insurance provider requirements..350 Nit brightness gives an exceptional visible display for clear and consistent on-screen pictures

Shield electronic devices or equipment from power spikes with this light gray surge protector. Two outlets are positioned on the side to accommodate three transformers without blocking the five surface outlets, while the power switch controls every connected device simultaneously. A diagnostic LED indicates active grounding status, while the 15-amp circuit automatically shuts down if protection is impaired. The 7-foot power cord allows flexible placement of equipment or workstations, and keyhole slots in the plastic housing enable mounting on a wall or desk. This Tripp Lite Protect It! surge protector suppresses excess electric current up to 2160 joules, while EMI and RFI interference is filtered to avoid data loss or damaged hardware..Surge protector provides 2160 joules of protection for both home and office electronics.Features seven power NEMA 5-15R outlets.Dimensions: 1.54"H x 2.72"W x 10.3"D - Cord length: 7'.AC 120 input voltage.Meets or exceeds cUL, UL 1363, RoHS, UL 1449 Third Edition, and IEEE 587 standards.EMI/RFI noise filtering reduces line noise that can cause data loss and keyboard errors.Comes in light gray.Lifetime manufacturer limited warranty.Comes in gray/silver.Lifetime manufacturer limited warranty.Block excessive voltage to preserve electronics with this Tripp Lite Protect It! seven-outlet 2160-joule surge protector.

Tripp Lite 7-Outlet surge suppressor in black color has diagnostic LED to indicate surge suppression status. Surge suppressor has an integrated circuit breaker to provide overload protection over all outlets..Black.Input voltage: 120 VAC (110-125 VAC).Input connection: NEMA 5-15P.4' power cord.540 joules.7 outlets, Plastic, Style: Strip.Frequency: 60 Hz.Output: 1875 W, Circuit breaker: 15 A, Input cord gauge, type: 14 gauge, SJT, Maximum surge amps: 36000, Clamping voltage (RMS): 150.Applications: Ideal for any desktop, network or home computing application requiring AC line protection.Combination AC circuit breaker and 2 position on/off power switch, built-in LED confirms suppressor protection present (green) status.Integrated keyhole slots provide convenient wall/desk mounting.Lighted on/off switch with integrated circuit breaker for overload protection of all outlets.Protects all electronics.6 right angle and 1 transformer plug outlet.Includes full normal mode (H-N) and common mode (N-G / H-G) line surge suppression.Package contents: TLP74RB surge suppressor.Certifications and standards: UL, ROHS, cUL, exceeds IEEE 587 category A and B specifications.Weight: 1 lbs..Lifetime limited, $25000 ultimate lifetime insurance.Tripp Lite 7-Outlet surge suppressor in black color offers economical AC surge suppression for sensitive electronic equipment and features suppression rating of 540 J.

The Tripp Lite PDUMNH20 single-phase monitored PDU with eight outlets, reports voltage, frequency and load level through Ethernet interface. It features lighted display that continuously reports output power consumption in amps. This PDU supports HTTP, HTTPS, PowerAlert network management system, SMTP, SNMPv1, SNMPv2, SNMPv3, Telnet, SSH, FTP, DHCP, BOOTP and NTP protocols. It offers real-time clock backup to maintain the time of day and date. The 10/100 Mbps auto-sensing feature of this PDU, allows optimal communication with 10/100 Base-T networks..Single-phase monitored PDU SmartOnLine SU2200RTXL2Ua, SU2200RTXLCD2U, SU2200XLCD, SmartPro SM2200RMDVTAA, SMART2200CRMXL UPS.Dimensions: 1.7"H x 17.3"W x 6.2"D.Metal construction for durable use.Output receptacles: Eight NEMA 5-15/20R, Input receptacles: NEMA L5-20P.Input voltage: 120 VAC, Output voltage: 120 VAC, Input current: 20 A.Frequency required: 50/60 Hz, Power rating: 1.9 kW.Cable length: 12'.Management protocols: HTTP, HTTPS, PowerAlert Network Management System, SMTP, SNMPv1, SNMPv2, Telnet, FTP, DHCP, BOOTP, NTP.Form factor: Horizontal rackmount.Front panel LCD display: Digital meter reports PDU output current in amps.Storage temperature: 5 to 122 deg F, Relative humidity: 5 - 95 percent non-condensing, Operating elevation: 0 - 10000'.Tiered access privileges allow an administrator and a guest to login via web browser.Built-in SNMP/Ethernet interface reports voltage, frequency and PDU loading via network or secure web browser interface using user specified alarm.Supports DHCP/manual configuration and 10/100 Mbps auto-sensing for optimal communication with 10/100 Base-T networks.Contains plug retention plates, rack mount brackets, owner's manual, L5-20R to 5-20P adapter.Meets Tested to UL 60950 (USA), CSA (Canada), Class A (Emissions), NOM (Mexico), RoHS compliant certifications and standards.Weight: 7 lbs..Comes with 2 years limited warranty

Applications: Protection of sensitive electronic equipment in 19 inch rackmount, wall mount and under counter applications, such as internetworking equipment, PC systems, telecommunications.Input voltage: 120 VAC (110 - 125 V).Input connection: NEMA 5 15P input plug.15' cord.Dimensions: 1 3/4"(H) x 17 1/2"(W) x 4"(D).Receptacles: 14 x NEMA 5 15R.Power: 120 VAC output voltage, 15 A line current, 50/60 Hz, 1.80 kVA power handling, 3000 J surge energy rating, 120000 A max surge, 140 V RMS clamping.Form factor: 1U rack mountable.Material: Metal.Protection mode: Full normal mode (H N) and co mmon mode (N G / H G) line surge suppression.Diagnostic LED confirms suppressor operation, transparent locking switch cover prevents accidental shutoff.40 80 dB EMI/RFI noise filtering, 14 outlets.15A circuit breaker, power switch controls power to all outlets, rack mount style.Distance between front outlets 38.9 mm, distance between rear outlets 38.9 mm.Prevents unsafe conditions during extreme extended over voltages and catastrophic occurrences.Applications: Protection of sensitive electronic equipment in 19 inch rackmount, wallmount and under counter applications, such as internetworking equipment, PC systems, teleco mmunications.Includes: DRS 1215 surge suppressor, warranty information, instruction manual.Standards and certificates: Tested to UL1449 3rd Edition by ETL.Weight: 4.6 lbs..Warranty: Lifetime limited.Tripp Lite 14-Outlet Surge Suppressor - Protects Electronic Equipment

Designers Edge E238 12/3-Gauge 50-Foot Cord Reel Power Station offers 50-feet of portable power and keeps your workstation organized. This reel features (6) grounded outlets, an on/off switch and a light-up power display. The 12-gauge, 50-foot cord is green and black with a safety stripe for improved visibility. The yellow handle provides easy portability and the hand wind knob allows for tangle free, easy winding of your power cord. This product is rated for 15-amps, 120-volts, 1,875-watts and is UL listed, meaning it has been tested for safety and quality by an independent agency. This reel measures 12-inches (H) by 15.5-inches (W) by 7.5-inches (L) and weighs 10.4-pounds. Coleman Cable, Inc. is a leading manufacturer and innovator of electrical and electronic wire and cable products for the security, sound, telecommunications, electrical construction, retail, commercial, industrial, irrigation, HVAC and automotive markets. Coleman Cable, Inc. offers a family of leading brands such as Moonrays, Fire Shield and Designers Edge. Since 1987, Designers Edge has been building its reputation as an innovator of commercial and industrial lighting. Designers Edge is recognized as a leader in its industry and holds multiple patents and awards for its world class designs..Features (6) grounded outlets and a power display light.12-gauge cord is green and black with a safety stripe for improved visibility.Rated for 15-amps, 120-volts and a maximum of 1875-watts.cUL listed which means it has been tested for safety and quality by an independent agency.Reset/off switch lights up when power is on