VESA Wall Mounts for Computer Monitors

MI-9000 screen adapter kit will fit practically all LCD and LED/OLED monitor with a bezel height of 11.5 to 19.2 inches with thickness of up to 2.75 inches. These dimensions should be compatible with most monitors up to 30 inches in screen size. The versatile arms are designed to mate with any VESA monitor mounts with VESA 75x75 and 100x100 mm configurations. All the necessary hardware and installation instructions are included in the package..Compatible with most monitors up to 30 inches in screen size.VESA 75x75 and 100x100 mm configurations.Can safely carry up to 17.6 lbs. monitors.Supported by manufacturer's limited lifetime warranty.MI-9000 VESA adaptor attaches to your non-VESA compatible monitor and allows it to be connected to the industry-standard monitor desk mounts and stands.

The ViewSonic WMK-047-2 wall mount in black, supports 98" flat panel display..Wall mount is compatible with flat panel display.Maximum screen size supported: 98", Maximum load capacity: 200 lbs..Dimensions: 25.6"H x 37.8"W x 1.8"D.Color: Black.VESA mount standard: 800 x 400, 600 x 400, 400 x 400.M8 type screws.Slide-in plate for VESA standard 75 x 75, 100 x 100 device.Includes: Two plate, two trestle, one installation guide, 29 x screw, 10 x washer, 10 x plastic bolt.Weight: 15.4 lbs..Comes with 1 year limited warranty.Comes in black.Rubber feet protect desk surface.1-year manufacturer limited warranty

The TH-1040-VFM offers sophisticated technology alongside superior aesthetics. Made from die cast aluminum, this mount has three pivot points and a ball joint mechanism to give you infinite adjustment and complete control over tilt, pan, and portrait to landscape rotation. Smooth Glide thrust bearing technology allows the display to be moved smoothly and effortlessly, even with a heavy display. This mount comes pre-assembled for quick and easy installation, with advanced cable management to give you a professional finish. The quick attachment/quick release mechanism allows you to install and detach your display in seconds..Full motion wall mount.Ideal for displays under 55lbs.Min distance from wall: 4.17, Max distance from wall: 17.91.Built from steel. Color: Silver.Full range of motion. Tilt adjustment 20 degrees in any direction, pan adjustment 90 degrees left and 90 degrees right. Supports landscape to portrait screen rotation..7 lbs..Package dimensions: 16.00" x 7.00" x 4.00".VESA up to 200x200

The MI-4110 is a versatile TV or monitor wall mount that offers full motion capability to adjust your TV with ease. Tilt or swivel to reduce glare and find the perfect angle. Extend the mount up to 15" from the wall to enjoy a comfortable view from any seat, or retract to keep your TV close to the wall. The single stud installation makes installation a breeze. This sturdy mount holds screens up to 66 lbs..FULL MOTION TV WALL MOUNT: Articulating arms with adjustable 20 degrees tilt up and down; 180 degrees swivel left or right. Retracts to 3.5"; Extends up to 15.7" from the wall.HEAVY DUTY FLAT SCREEN BRACKET: High strength steel material offers loading capacity to 66 lbs (tested to 132 lbs)..UNIVERSAL VESA WALL MOUNT: Compatible with VESA 75x75mm (3"x3"), 100x100mm (4"x4"), 200x100 mm (8"x4"), 200x200mm (8"x8") without adapters, fits VESA 300x300 (12"x12"), 400x300mm (16"x12"), 400x400mm (16"x16") with 4 extra plate adapters.COMPATIBILITY: Fits SAMSUNG, SONY, LG, VIZIO, TCL, ELEMENT, SCEPTRE, HISENSE and other TV brands between 23 and 55 Inch Screen Sizes.LARGE MONITOR WALL MOUNT: Works with larger 32, 34, 35 inch ultrawide monitors. Use it as a full motion monitor wall mount to save desktop space and for ergonomic computer screen installation. PLEASE ENSURE THE BACK OF YOUR MONITOR CAN FIT 8X8 INCH MOUNTING PLATE. SOME MONITORS MIGHT ONLY HAVE A 4X4 OPENING.Supported by manufacturer's limited lifetime warranty

This is a Human Scale Black 100 x 100mm VESA Plate for mounting monitor screens onto M2.1, M8.1 and M10 Monitor arms. model is VESA1-11-B or other models such as 1907511007BL01 (should all look the same). Plate, Plastic bezel and screws are included..Made from durable plastic material for long-lasting use.Fits VESA 100 x 100mm plates for M2.1, M8.1 and M10 monitor mounts.Designed to work with VESA 1.0 mountings for precise positioning.Monitor Mounting: Allows for easy mounting and adjusting of monitors

Mount-It! monitor and keyboard tray is designed to create a wall-mounted workstation. It is a space saving and economical solution for small spaces. Most wall mounted workstations or rolling standing desks require an investment 5 to 10 times of this wall mount platform..This wall mounted monitor and keyboard tray bracket attaches to any standard VESA monitor wall mount and creates an instant space-saving workstation..Choose a VESA monitor wall mount and mount it to a wall, connect the MI-7917 to the mount, and install your monitor and keyboard to the floating bracket..The static floating keyboard tray is study and non-sagging, and the spacious 25.6" width is large enough for your keyboard and a mouse..Features strategic, pre-cut cable management ports to keep your wires and cables organized, and the frame is low-profile an integrated look..This monitor and keyboard tray wall mount bracket is compatible with any Mount-It! monitor wall mounts, and using an articulating mount adds more range..Supported by manufacturer's limited lifetime warranty

Single-Display Wall Mount Aluminum Tool-less Assembly| For up to 34" Monitors. Free up space with this wall-mount monitor arm and enjoy optimum viewing with the long dual-swivel extension arm. The premium design ensures smooth, effortless motion and makes it easy to re-position your display, to work in comfort or collaborate with others. The attractive silver finish complements your decor. The wall-mount system is ideal for business, healthcare, financial or other settings, where you may want to share your screen, or for customer-facing interactive displays. Adjust the Dual-Swivel Arm with Ease The wall-mount monitor arm extends a full 20.4" (52 cm) and has three swivel points, offering an extended range of motion. Move the dual-swivel arms left or right, to change your screen position. You can also adjust the swivel tension. Durable and Stable Construction The robust aluminum design provides a stable wall-mount for your computer monitor or flat-screen TV up to 34". It's ideal for touch-screen stability. The universal display wall mount supports VESA mount monitors (75x75, 100x100) up to 30.9 lb. (14 kg) in weight. Adjust your Viewing Angle Share your screen with ease. The display wall mount offers a full +180-degree/-180-degree pan, to move your screen left or right. It tilts freely +90/-15-degrees, to adjust the angle up or down. Rotate your screen for landscape or portrait viewing. Low-Profile Design Push the swivel arm back to the wall, so your monitor sits just 5" (129 mm) from the wall when not in use. Tool-less Assembly The quick slide-and-click connections make the monitor wall mount easy to assemble and saves time when setting up multiple units. The TAA compliant ARMWALLDSLP is backed by a StarTech.com 10-year warranty and free lifetime technical support..Raise your monitor to a comfortable viewing height with this monitor arm.Supports up to 30" monitors for versatile use.Made of aluminum.-15 to 90-degree tilt, -15 to 90-degree pan, and -15 to 90-degree rotation adjustment options enable optimal viewing.Compatible with: VESA 100 x 100mm mounting patterns.Comes in silver.Rubber feet protect desk surface.2-year manufacturer limited warranty

Premium quality durable gas spring assisted full-motion articulating monitor wall mount provides smooth, precise and effortless viewing height adjustment up to 11.02 inches. Rotating VESA plate supports portrait or landscape monitor orientation. Detachable VESA plate provides for easy monitor installation and adjustment. Compliant with VESA standard mounting hole pattern 75x75mm and 100x100mm to fit most 17" to 32" flat and curved monitors. Ergonomic enhanced features, include height adjustment, 180° arm swivel, monitor tilt angles of +/- 35° (upward/downward), and 180° (left/right) pan angle, provide unlimited viewing angle positions for optimal viewing comfort. Adjustable tension gas spring movement accommodates different weight loads to ensure smooth height adjustment, holds monitor weighing up to 17.6 lbs (8kg). The monitor arm can extend up to 16.61 inches from the wall, great for areas with severe space constraints. Integrated cable management system keeps cables neat, organized, and out of the way for a clean clutter-free desktop. Designed for single wood stud mounting fits perfectly into limited wall spaces for convenient and easy installation..Raise your monitor to a comfortable viewing height with this monitor arm.Supports up to 32" monitors for versatile use.Made of aluminum.-35 to 35-degree tilt, -35 to 35-degree pan, and -35 to 35-degree rotation adjustment options enable optimal viewing.Weighs 3.86 lbs..Dimensions: 14.57"H x 4.5"W x 20.6"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in black.3-year manufacturer limited warranty

The Mount-It! MI-785 Hanging Monitor Mount for cubicles is specifically designed to allow you to hang a VESA computer monitor on your cubicle wall with a heavy-duty, adjustable clamp. No drilling required! Simply adjust the clamp hook to fit the top of your cubicle wall, and hang the mount. This screen hanger also has a quick release handle so you can easily adjust your monitor to 10 pre-set heights for the optimal viewing angle. Works with VESA monitors (75x75 and 100x100) from 17" to 32" and supports up to 17.6 lbs..Easily Clamps on Cubicle Divider Walls.RECOMMENDED MONITOR SIZES: 17" - 32".HANGING CLAMP ADJUSTMENT: 1.46" (MIN) - 3.5" (MAX).VESA COMPATIBILITY: 75mm x 75mm, 100mm x 100mm.CAPACITY: 17.6 lbs..ROTATION: +/-180 degrees.Fits all Samsung, LG, ACER, ASUS, HP, DELL, VIEWSONIC, SONY and other branded monitors with VESA 75 and VESA 100 mounting patterns.Supported by manufacturer's limited lifetime warranty

The Atdec AWMS-4-4675 is a quad 18" arm combination attached to a 29.5" post with F-clamp. Display height, optimal viewing angle, and orientation can be set to individual requirements. Built of lightweight yet durable aluminum, the mount can be easily recycled at the end of its life..Raise your monitor to a comfortable viewing height with this quad-arm monitor mount.Supports four displays up to 30" in landscape orientation or up to 22" in portrait mode.Comes in black and made of aluminum.-25 to 45-degree tilt, 360-degree pan, and 360-degree rotation adjustment options enable optimal viewing.Compatible with: VESA 75 x 75mm, and 100 x 100mm mounting patterns.Rubber feet protect desk surface.Compatible with flat screens with maximum weight up to 26.5 lbs. or curved screens with maximum weight up to 17.6 lbs. per monitor.Modular, adaptable, and upgradeable design.10-year manufacturer limited warranty

Premium quality durable gas spring assisted full-motion desktop mount provides smooth, precise and effortless viewing height adjustment..Adjustable Monitor Mount.Supports monitors from 13" to 32" and up to 19.8 lbs (9 kgs).Rotate-able VESA plate supports portrait or landscape monitor orientation.Compatible with VESA mounting patterns 75 x 75 and 100 x 100 mm.Ergonomic features include height adjustment from 6.8 inches to 19.5 inches, 360° arm swivel, monitor tilt angles of +/- 90° (upward/downward), and 180° (left/right) pan angle.Both C-clamp and grommet mount bases are included, easily and quickly installs onto most of desks or tables.Detachable VESA panel simplifies installation and attachment of monitors by allowing you to remove the VESA plate from the mounting arm during monitor installation. Simply put it back after installation.Heavy-duty C-clamp is compatible with desk surfaces from 0.4" to 3.3" in thickness and grommet mount fits through surface hole from 3/8" to 2.25" wide and up to 3" thick.Integrated cable management clips conceal cables from sight, create a lean, sleek look after setup

This Mount-It! wall-mount workstation is designed for commercial and industrial use. It houses one monitor, keyboard, and mouse tray, as well as a desktop computer CPU in a compact and ergonomic package. The gas-spring monitor and keyboard tray arms offer full motion and height adjustment. It is perfect for applications where more than one user needs access to the computer system. The wall-mounted design takes up minimal space and can be adjusted for the needs of multiple users..This wall-mount workstation is designed for commercial and industrial use.Fits up to 32" monitors.Comes in black and made of steel.Tilt angle: +/-35 degrees; swivel: +/-180 degrees.Foldable keyboard tray is 26" wide to accommodate a full-size keyboard and mouse.Dimensions: 37.1"H x 25.7"W x 17.2"-27.5"D.Compatible VESA patterns: 75mm x 75mm and 100mm x 100mm.High-strength steel offers 17.6 lb. capacity for a monitor and 22 lb. capacity for the CPU mount.Height adjustments are a breeze with the gas-spring arms, and the full motion arms allow for precision adjustments for a comfortable position.Perfect addition to any workspace, especially suited for medical and industrial applications.Supported by manufacturer's limited lifetime warranty

The Atdec AWMS-2-BT75 is a super heavy-duty dual vertical monitor mount with heavy-duty F-clamp desk fixing. The mount holds two super ultrawide displays in a vertical stack configuration. This mount is perfect for high-performance computer setups used by gamers, software developers, traders, and designers. Any application with dense visual data will benefit from mounting two ultrawide displays with the Atdec AWMS-2-BT75..Raise your monitor to a comfortable viewing height with this heavy-duty dual vertical monitor mount.Holds two ultrawide monitors up to 57".Height adjusts from 0.4" to 22.6" for comfortable viewing.Comes in black and made of aluminum.Tilt functions enable adjustments for comfortable viewing.Compatible with: VESA 75 x 75mm and 100 x 100mm mounting patterns.Rubber feet protect desk surface.Compatible with flat screens with maximum weight up to 55 lbs. or curved screens with maximum weight up to 40 lbs..10-year manufacturer limited warranty

The Atdec AWMS-BT40 is a super heavy-duty mount for large, heavy, and deeply curved ultrawide monitors. Designers, software developers, gamers, and people managing rich visual data will appreciate increased immersion achieved with optimal focal distance..Raise your monitor to a comfortable viewing height with this mount.Designed to hold one 24"-57" monitor.Made of aluminum and steel in black.Tilt functions enable adjustments for comfortable viewing.Compatible with VESA 75 x 75 and 100 x 100 mounting patterns.Compatible with flat screens with maximum weight up to 55 lbs. or curved screens up to 40 lbs..10-year manufacturer limited warranty

Increase your productivity, with a workstation that fits the way you work. Designed for a wide range of motion, this wall-mounted computer workstation is easily adjustable with independent arms for your monitor and keyboard. Move the wall-mounted sit-stand desk into position to work. Then push it back against the wall when not in use, folding the arms close to the wall. It's perfect for use in hospitals, clinics, warehouses, and other space-limited areas. Extend the articulating monitor arm up to 25.6" (65 cm) from the wall. For ideal positioning, tilt or swivel your monitor, or rotate 360 degrees. The sit-stand workstation supports a VESA mount (75x75, 100x100) monitor up to 30", with a maximum weight of 19.8 lb. (9 kg). This wall-mounted height-adjustable desk enables a wide range of users to work in comfort. Adjust the height of both arms along the pole up to 17.5" (44.5 cm), plus the spring monitor arm has a height adjustment range of 10.6" (27 cm). Place your keyboard where you need it, with an independent keyboard tray that extends up to 30.9" (78.4 cm) from the wall. Tilt the keyboard back to make sure your wrists are in a neutral position while typing. Place your mouse in the holder when not in use. The modular design, with quick slide-and-click connections, makes installation easy and saves time when setting up multiple units..Raise your monitor to a comfortable viewing height with this monitor arm.Supports up to 30" monitors for versatile use.Made of aluminum.-15 to 90-degree tilt, -15 to 90-degree pan, and -15 to 90-degree rotation adjustment options enable optimal viewing.Weighs 24.7 lbs..Dimensions: 48.43"H x 26.9"W x 29.2"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in silver.2-year manufacturer limited warranty

Relieve neck and back pain while freeing up desk space by mounting your monitor on the wall. This Mount-It! single-monitor wall mount can tilt, swivel, and rotate for versatile positioning. It features a gas-spring arm for effortless height adjustment and includes integrated in-arm cable management for a neat and organized appearance. Installation is easy with a single-stud wall plate and detachable VESA bracket. The sturdy aluminum and high-strength steel construction will stand the test of time. Turn the hexagonal bolt at the base of the gas-spring arm to adjust the tension to hold the monitor in place..Single-monitor wall mount helps you adjust your monitor to fit your needs.Fits monitors up to 32".Gas-spring arm allows for effortless height adjustment up to 11".Made of aluminum, steel, and plastic; comes in black.Tilt angle: +/-35 degrees; swivel: +/-180 degrees; rotation: +/-180 degrees.Compatible VESA patterns: 75 x 75mm and 100 x 100mm.Rotate between portrait and landscape orientation with ease.In-arm cable slots keep your space organized.Installing your monitor is quick and easy with a detachable plate.Extension from wall: 3.9"-20.5".Maximum weight capacity: 17.6 lbs..Supported by manufacturer's limited lifetime warranty

Mount-It! MI-7919 monitor and keyboard tray is designed to create a wall-mounted workstation. It is a space saving and economical solution for small spaces. Most wall mounted workstations or rolling standing desks cost 5 to 10 times the price of this wall mount platform.It is very easy to install and use. The vertical tray connects to the wall mount on the back side and to a monitor on the front side. The large keyboard platform sits directly beneath the monitor. All necessary instructions and hardware included..Raise your monitor to a comfortable viewing height with this monitor mount.Supports up to 32" monitors for versatile use.Height adjusts from 14.2" to 19.7" for comfortable viewing.Made of steel.Tilt functions enable adjustments.Monitor mount supports up to 60 lbs. and included mount for computer supports up to 22 lbs..Dimensions: 25.8"W x 12.4"D.Compatible with 75 x 75 and 100 x 100 VESA patterns.Comes in black.Supported by manufacturer's limited lifetime warranty

Find your best view, save desk space and discover your most productive self, thanks to the LX Wall Monitor Arm. Place your screen where you need it for each project, and then reclaim a space full of opportunities by folding the arm and pushing it aside during a much-needed screen break..Monitor Mount & Stand Type: LX Wall Monitor Arm.Monitor Size Supported & Number of Arms: 34" Screen Support, 1.Adjustable Minimum and Maximum Height (Inches): 13.True Color & Material: White, Metal.Articulation: Tilt Angle 75°, Rotation Angle 360°.Storage options: N/A.Weight (lbs.): 5.6.Mount Bracket or VESA Pattern: MIS-D

Find your best view, save desk space and discover your most productive self, thanks to the LX Wall Monitor Arm. Place your screen where you need it for each project, and then reclaim a space full of opportunities by folding the arm and pushing it aside during a much-needed screen break..Monitor Mount & Stand Type and Use: Wall Mount for Monitor.Monitor Size Supported & Number of Arms (If more than 1): 34", 1.Adjustable Minimum and Maximum Height (Inches): 13".True Color & Material of Item: Matte Black.Articulation: Tilt Angle (75), Rotation Angle (360).Storage options: Not Available.Weight (lbs.): 5.4 lbs.

The AM95 is a top quality articulating mount has 18 inches of extension, 12 degrees of tilt and allows for lateral shifting. Made to be mounted into double studded walls for extra rigidity, the AM95 holds up to 95 lbs. With unrivaled versatility as a key feature in it's design, it was created to be ADA compliant with a flat depth of only 2 inches. Add a slim display to this mount and you will have a very sleek, against the wall design making it very aesthetically pleasing. Among articulating mounts the AM95's price to value is amazing, especially with the evolution of newer and thinner flat panel displays in use today. Complete install from box to wall is much quicker than most other wall mount models available. Cable management channels are also built into the arm to keep power cables protected when pulling or pushing the display to your desired angle. In addition, an open wall plate allows for clear access to cable and power connections..Low profile swing out collapses to just 2.0" from the wall making it ADA compliant.Single piece construction makes for a quicker install.Scissor style arms pull up to 18" from the wall.12° of downward tilt.Universal mounting pattern up to 600 x 400

The Atdec AWMS-6-13717 is a six-arm combination attached to a 29.5" post. Display height, optimal viewing angle, and orientation can be set to individual requirements. Built of lightweight yet durable aluminum, the mount can be easily recycled at the end of its life..Raise your monitor to a comfortable viewing height with this six-arm monitor mount.Supports six monitors up to 24" for versatile use.Comes in black and made of aluminum.-25 to 45-degree tilt and -90 to 90-degree pan adjustment options enable optimal viewing.Compatible with: VESA 75 x 75mm and 100 x 100mm mounting patterns.Rubber feet protect desk surface.Compatible with flat screens with maximum weight up to 20 lbs. or curved screens with maximum weight up to 17.6 lbs. per monitor.Modular, adaptable, and upgradeable design.10-year manufacturer limited warranty

The ergonomic design offers 20" (51 cm) of height adjustment to work sitting or standing. Data entry complete? It folds when not in use to open up more space for the best patient care. Cable management keeps cords organized and easy to clean, and interchangeable laminate options enhance your healthcare designs..Wall display:Fits most screens 24–27" with a black backing for a seamless background.Low-profile design stays within 4" (10 cm) of the wall to fit tight spaces.Unique T-slot makes it easy to attach accessories like a proximity reader.Includes a mouse/keyboard tray with a removable worksurface.10-digit lock code keeps patient data and technology secure.Cable management controls the cable chaos.Screen Size: 27 inches or less.Lift: 20 inches.Weight capacity: Less than 23.5 lbs.Mounting Standards: VESA FDMI, MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm).Product Dimensions: 38.8" x 29" x 3.8" (closed) or 19.25" (open) (99 x 74 x 10 or 49 cm).Includes enclosure, wrist rest, cable management hardware, installation template, installation hardware, keys.Warranty: Five years for mechanical components; one year for electrical components.Cable wrap included for better cable management.Maximum keyboard physical dimensions: 24.2"W x 1.5"H x 8.3"D (61.5 x 3.8 x 21.1 cm).Maximum CPU physical dimensions: 10.7"W x 10.5"H x 2.8"D (27.2 x 26.7 x 7.1 cm).Maximum monitor physical dimensions: 25.8"W x 14.5"H x 2.5"D (65.5 x 36.8 x 6.4 cm). Monitor depth greater than 2.5" (6.4 cm) is allowable, however screen will protrude beyond profile of enclosure.2019 Healthcare Design Expo Award Winner.Caregivers can work comfortably while saving space in crowded patient rooms or hallways with this low-profile, wall-mount workstation

Easily raise your monitor to an optimal viewing height, reducing the strain on your neck and shoulder while working with Mount-It! MI-1766B dual-monitor wall mount. Each arm comes with a gas-spring mechanism for easy height adjustment without the need for tools. Full-motion articulating arms are fully adjustable for placing the monitor to almost any viewing angle. Comes with necessary hardware for an easy mounting process including mounting screws, anchors, washers, and VESA screws. Integrated cable management channels in each arm keep AV and power cords organized. Both monitors can be placed in landscape or portrait position. The articulating arms reach a max extension of 16.6" from the wall..Easily raise your monitor to an optimal viewing height, reducing the strain on your neck and shoulder while working with dual-monitor wall mount.Dual mount supports 17" to 32" screens.Each arm has counterbalanced gas-spring arms for effortless height adjustment.Comes in black.Tilt range: +/-35 degrees; screen rotation: 180 degrees (landscape and portrait modes), swivel range: 180 degrees left and right.Compatible VESA patterns: 75mm x 75mm and 100mm x 100mm.Tilt, swivel, and rotation features: easily transition from portrait to landscape view.Perfect for small offices, game rooms, and anywhere space is at a premium.Comes with integrated cable management channels.Maximum wall extension: 16.6".Supported by manufacturer's limited lifetime warranty

This Mount-It! dual-monitor wall mount workstation is designed for commercial and industrial use, but can be used almost anywhere. The mount holds two monitors, a keyboard and mouse tray, and a desktop computer CPU, in a compact and ergonomic package. The wall-mounted design saves space and can be adjusted for the needs of multiple users. The included metal PC mount with safety straps mounts the desktop computer next to the workstation for a cleaner and more compact installation, while also protecting the PC from accidental bumps and dust..Dual-monitor wall mount with PC holder and keyboard tray is a perfect addition to any workspace.Fits 17"-32" monitors.Full-motion gas-spring arms provide up to 28" height adjustment for comfortable positioning.Made of a high-strength steel and comes in black.Tilt angle: +/-80 degrees; swivel: +/-180 degrees; rotation: +/-180 degrees.26"W x 9.5"D foldable keyboard tray accommodates a full-size keyboard and mouse, while a wall-mounted holder fits a 4.8"-8.3" PC.Dimensions: 37.1"H x 37"W.Compatible VESA patterns: 75 x 75mm and 100 x 100mm.Suitable for medical and industrial applications.Installing your monitor is quick and easy with a detachable plate.Weight capacity: 17.6 lbs. per arm and 22 lbs. for the PC mount.Safety straps keep your computer securely in place.Supported by manufacturer's limited lifetime warranty

The Atdec AWMS-3-137S4 is a triple-arm combination attached to a 15.7" post. The mount provides an extended arm length thanks to the display sliders attached to the outer arms. Display height, optimal viewing angle, and orientation can be set to individual requirements. Built of lightweight yet durable aluminum, the mount can be easily recycled at the end of its life..Raise your monitor to a comfortable viewing height with this triple-arm monitor mount.Supports three monitors up to 27" for versatile use.Comes in black and made of aluminum.Compatible with: VESA 75 x 75mm, and 100 x 100mm mounting patterns.Rubber feet protect desk surface.Compatible with flat screens with maximum weight up to 15.4 lbs. or curved screens with maximum weight up to 11 lbs. per monitor.Modular, adaptable, and upgradeable design.10-year manufacturer limited warranty

Mount-It! dual arm monitor wall mount helps clear out your desktop space and raise two monitors for a more ergonomic installation. Raising monitors to eye level helps prevent common issues such as neck and back pain and eye strain. Dual monitors increase productivity by displaying more information and applications right in front of your eyes. However, dual monitors take up space and if not installed correctly, will require you to switch positions when viewing different screens. Mount-It! monitor wall mount allows two monitors to be installed side by side while utilizing wall space. With the 180 degree rotation, you can switch one of the monitors to portrait mode, while the other in landscape mode. Or, if you are a gamer, you can angle the monitors towards each other to create an immersive view. We utilized the best gas spring components available in the market to make the height adjustment fluid and easy. The tension on the gas spring can be increased or decreased to the adjust the amount of counterbalance for the weight of your monitors - allowing fingertip height adjustment. Dual arm full motion design allows screens to tilt up and down, swivel left and right, as well as the ability to push the monitors towards the wall or extend them away from the wall. You can position the monitors exactly as you wish..Suitable with monitors 13-27 inches in screen size.Screen Rotation: 180 degrees.Monitor weight range: 4.4 lbs. to 14.3 lbs. max..Fits all Samsung, LG, ACER, ASUS, HP, DELL, VIEWSONIC, SONY and other branded monitors with VESA 75 and VESA 100 mounting patterns.Tilt Range: 90 degrees up and 45 degrees down.Swivel Range: 90 degrees left and 90 degrees right.Distance From the Wall: 3.5 inches min - 17.7 inches max.Includes cable management for clutter-free installation.Fits all Samsung, LG, ACER, ASUS, HP, DELL, VIEWSONIC, SONY and other branded monitors with VESA 75 and VESA 100 mounting patterns.Supported by manufacturer's limited lifetime warranty

This has two monitor arms attached to a small post. Each arm has three points of articulation and allows hand rotation of monitors landscape-to-portrait. The monitor arms are spring-assisted and can be installed in any of the four post channels, and additional monitor arms can be added later. The spring-assisted arm design provides excellent ergonomic support and display adjustment from a seated position. Perfect for any activity based workplace, sit-to-stand workstations, and also shared environments..Dynamic Monitor Arm.Dual Monitor Arms for Monitors up to 27".Adjustable height up to 14.49 inches.Black Aluminum and plastic.Tilt: +45 degrees/-25 degrees, Rotation: 360 degrees.17.25 lbs..VESA Mounting 75x75 or 100x100

Ergotron innovative TRACE Dual Monitor Mount adapts to how each user works and feels their best to create ergonomic, flexible workspaces. It intuitively adjusts between tasks and postures to encourage movement and collaboration, always returning to the natural home position. The modular TRACE design and premium, 15-year warranty solidify a long-term investment..TRACE effortlessly follows your next move.Easily transitions between individual tasks and collaboration.Lifts screens off the desktop from a compact base.Integrated cable management reduces clutter.Quickly converts to a single monitor configuration.Encourages regular movement to support healthy working.Maximum outside width of display is 26" (66 cm) when displays are 2" (5 cm) thick, which accommodates most displays with screen size up to 27". Actual allowable width of displays will vary slightly depending on display thickness.Weight Capacity: 8.1 to 21.5 lbs (3.7 to 9.8 kg) total. Individual monitor weight = 4.05 to 10.75 lbs (1.8 to 4.9 kg).Tilt Range: ↑35° / ↓5°.Mounting Standards: VESA MIS-D, 75/100 (hole pattern = 100 x 100 mm & 75 x 75 mm).Desk Clamp: Standard 2-piece desk clamp attaches to surface edge up to 2.55" (65 mm) thick.Stay organized - Integrated cable management reduces clutter.The innovative TRACE Dual Monitor Mount adapts to how each user works and feels their best to create ergonomic, flexible workspaces.

Find your best view, save desk space and discover your most productive self, thanks to the LX Dual Stacking Arm. This dual monitor mount lets you position each screen separately for a new level of flexible working. Project wrapped up? Reclaim a space full of opportunities by folding the arms and pushing them aside during a much-needed screen break..Monitor Mount & Stand Type: LX Dual Stacking Arm.Monitor Size Supported & Number of Arms: 24" Screen Support, 2.Adjustable Minimum and Maximum Height (Inches): 13.True Color & Material: Black, Metal.Articulation: Tilt Angle 75°, Rotation Angle 360°.Storage options: Not Applicable.Weight (lbs.): 14.0.Mount Bracket or VESA Pattern: MIS-D

Versatility meets affordability with the 2EZCLAMP. The solid articulating monitor arm featuring 90 tilt, 180 swivel, 360 rotation helps create unrivaled ergonomic experience and productivity. The individual VESA Plate height adjustment is designed to enable dual monitors to be perfectly aligned. When updating the monitors, the detachable VESA plate enables a quick and easy attachment. The 2EZCLAMP clears up valuable desk space removing unwanted clutter..Raise your monitor to a comfortable viewing height with this monitor mounting kit.Supports up to 32" monitors for versatile use.Comes in black and made of steel.-45 to 45 degree tilt and -180 to 180-degree rotation adjustment options enable optimal viewing.Two bays organize essentials such as pens, clips, etc..Weighs 17.64 lbs..Dimensions: 35.16"H x 19.6"W x 5"D.Compatible with: VESA 100 x 100mm mounting patterns.3-year manufacturer limited warranty

Cubicle-Wall Monitor Hanger Height Adjustable Steel For up to 34" Monitors. Free up valuable desk space in your cubicle workstation with this cubicle monitor mount. It lets you mount a monitor on your cubicle wall to keep your work area more organized, comfortable and productive. Heavy-Duty Steel The cubicle monitor hanger, made of steel with a metallic silver finish, securely supports a 17" to 34" VESA mount monitor, with a maximum weight of 17.6 lb. (8 kg). Free Up Desk Space The cubicle wall monitor mount helps you free up surface area in your workspace, and keeps cables neat with integrated cable management. Adjustable for Ideal Viewing Adjust your screen height quickly, by pulling the lever while sliding the monitor to the desired height. Up to 12" of height adjustment accommodates a wide range of users. For customized viewing, tilt your monitor +/-10 degrees and swivel +/-10 degrees. The cubicle monitor mount also rotates +/-180 degrees, for landscape or portrait positioning. Scalable Solution Customize your work area by hanging multiple monitors, using several cubicle monitor hangers to create a multi-monitor workstation. The micro-adjustment feature lets you align your monitors in perfect unison. Plus, angle your monitors for optimum viewing. Virtually No Assembly The cubicle-wall monitor mount is easy to set up. The monitor mount works in most cubicles, with wall sizes from 1.5" to 3.5" in thickness. It's optimized for wall heights ranging from 19" to 30" above the desk surface. ARMCBLB is backed by a StarTech.com 5-year warranty and free, lifetime technical support..Raise your monitor to a comfortable viewing height with this monitor mount.Supports up to 35" monitors for versatile use.Made of plastic.-10 to 10 degree tilt and -180 to 180-degree rotation adjustment options enable optimal viewing.-180 to 180-degree rotation allows monitors to be oriented vertically or horizontally.Meets or exceed VESA standard.Comes in silver.Rubber feet protect desk surface.2-year manufacturer limited warranty

The Samsung WMN-46VD 46" LCD display video wall mount is compatible with Samsung UD46C, UD46C-B, UE46D, UD46D-P, UD46E-A and UD46E-B LCD display. This durable wall mount is capable of holding monitors of screen size 46". It has maximum load capacity of 29 kg. This mount offers dimensional consistency for easy installation. It allows to adjust video walls across three axis points for seamless viewing. It helps to mount your monitor in landscape or portrait orientation. It features VESA-compliant 600 mm x 400 mm, 400 mm x 600 mm and 400 mm x 400 mm mounting hole patterns..Video wall mount is suitable for use with Samsung UD46C, UD46C-B, UE46D, UD46D-P, UD46E-A and UD46E-B LCD display.Maximum screen size supported: 46", Maximum load capacity: 29 kg.VESA mount standard: 600 x 400, 400 x 600, 400 x 400.Specially-designed mount offers dimensional consistency for easy installation.Finely adjust video walls across three axis points for seamless viewing.Industry-leading slim depth enhances your business environment while expanding presentational flexibility through landscape and portrait support.Weight: 10.4 kg.Weighs 22.9lbs..Compatible with: VESA mounting patterns

Save space by mounting two monitors on your wall - Wall Mount Dual Monitor Arm - Articulating - Works on VESA Mount monitors incl Acer & HP & Samsung - Steel - Supports two 15“ to 24” Monitors - Both monitors are mounted on a single arm so they move together in perfect unison to stay aligned - Mounting arm extends out from the wall up to 23" (585 mm) or tucks back to 6.5” (165 mm) from wall for a low-profile look - Dual monitor wall mount / Dual Monitor Arm / Computer monitor wall mount.Wall mount two 15“ to 24” monitors to save space.Adjust your monitors in unison, to keep your screens aligned.Mounting arm extends out from the wall up to 23" (585 mm), or tucks back to 6.5” (165 mm) from wall for a low-profile look.Heavy-duty steel construction.Swivels up to 180 degrees for optimal viewing.Rotate your monitors up to 360 degrees for landscape or portrait viewing.Supports weight capacity of 11 lb. (5 kg) per monitor.Dimensions: 7.2"H x 2.76"W x 25.2"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in black.Rubber feet protect desk surface.5-year manufacturer limited warranty.Save space by mounting two monitors on your wall

This incredibly versatile product supports up to two 24" monitors each with a maximum individual weight of 26.5 lbs. Not only will this strong and sturdy mount have no trouble holding VESA certified 75x75 or 100x100 monitors, (fitting the above criteria), it is also extremely adjustable! Each monitor can be placed at a different height to accommodate different sized monitors. Both monitors have 360 degrees rotation. Also included is a +/- 20 degrees tilt in any direction Individually for BOTH Monitors, ensuring maximum user comfort. Height adjustable, with a maximum height of 13" from the desk to the center of the mounting device. Studies show that dual monitors can increase productivity by up to 50%..Compatibility: 2 x LCD / LED Monitors.Country of Origin: Taiwan.Device Supported: Flat Panel Display.Classic Desk Stand.Maneuverable and reliable, stand mounts are the most popular mounting choice for monitors..Can be moved around your desk, no unscrewing necessary.Weighs 6.92lbs..Dimensions: 9.46"H x 26.46"W x 14.57"D.Compatible with: VESA 75, 100 mounting patterns.Comes in black.3-year manufacturer limited warranty

Save space by wall-mounting your monitor, and maximize viewing with the swiveling extension arm. Wall-mount your computer monitor or flat-screen TV to free up space on your desk or table. This wall-mount monitor arm supports flat-panel displays up to 27" and provides a full 15" (382 mm) arm extension for optimum screen adjustment. The pivoting arm swivels +90° / - 90°, plus tilts and rotates to provide maximum viewing flexibility. Save space by wall-mounting your flat-panel display. This monitor arm helps you save space on your desk or table surface, by letting you securely wall-mount a computer monitor or LED / LCD TV from 13" to 27" (330 to 686 mm) in size and up to 33 lb. (15kg) in weight. It's ideal for many different applications, including business, healthcare or financial settings, where you may want to share your screen with patients, clients, or other visitors. The wall-mount monitor arm also works well in office settings or workspaces that back against a wall. Adjust your screen position with ease. The monitor arm extends a full 15" (381 mm) making it easy to change your screen position, so you can work more comfortably or share your screen with others. The dual-swivel arm offers a full +90° / - 90° swivel, to move your screen easily to the left or right and share your screen with maximum viewing flexibility. It tilts freely +70° / - 70°, allowing easy angle adjustment up or down to share your display, while collaborating with team members. Easy installation. The aluminum wall-mount monitor arm features slide-in wall plate construction for easy installation. To help keep your work area free of clutter, the monitor arm also features a cable clip that keep your cables neatly out of sight. The ARMWALLDS is backed by a StarTech.com 2-year warranty and free lifetime technical support..Mount your monitor or flat-screen TV on a wall to save space and easily share your screen.Supports a 13'' - 27'' monitor up to 33 lb. (15kg).Arm extends a full 15" (382 mm).Made of aluminum.Tilt, Swivel, and Pan functions enable adjustments for comfortable viewing.Dimensions: 4.7"H x 21.65"W x 4.9"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in black.Rubber feet protect desk surface.2-year manufacturer limited warranty

This VESA-compliant TV wall mount lets you place your digital signage, monitor or television where everyone can see it best. It's ideal for office, hybrid and work-from-home environments, including office cubicles, art tables and lab workbenches. The stylish aluminum mount fits most flat-panel displays from 13" to 32" and supports up to 22 lbs. The articulating arm adjusts independently to optimize viewing angles, minimize glare and improve ergonomics. To minimize screen glare, reduce eye fatigue and increase viewing comfort, the mount features -15° to +15° tilt, -90° to +90° swivel and full 360° rotation for positioning your screen just right. For hassle-free display compatibility, this slat wall mount supports the following VESA mounting hole patterns: 75 x 75 and 100 x 100. Requires slat wall system for installation; and easily attaches to the Slat Rail with Posts (DMSWKITTAA) or the Slat Rail (DMSWSLATTAA), both sold separately. Your monitor is elevated above the desktop, which frees up precious workspace. You can also slide the monitor along grooves and then adjust the viewing angle for optimal ergonomics. Grooves on both sides of the slat rail accommodate independently adjustable monitor setups when desks are pushed together back-to-back. The unit is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts..Mounts your 13 to 32 in television or monitor on a slat wall surface to provide optimal viewing angles..TV mount for slat walls adjusts viewing angle easily with just a single touch..-15° to +15° tilt, -90° to +90° swivel and 360° rotation help you find the perfect angle..Stylish aluminum construction blends into any decor and supports up to 22 lb..Requires installation of Slat Rail with Posts (DMSWKITTAA,) sold separately.

This tilt angle wall mount is designed for robust functionality and optimized for ease of installation. The AD-WT-5040 suits a wide range of displays to be mounted offset 2.20” from the wall. This accommodates a 15 degree tilt range, and allows technology devices to be mounted discretely behind the display. The AD-WT-5040 is suitable for commercial, domestic, and most light industrial environments. AD-WT-5040 suits most types of wall construction and embodies Atdec’s easy-installation ethos. The product includes a spirit level and has slotted mounting holes. Hardware to mount the display is included..Tilt single display wall mount.Ideal for displays up to 110 lbs..Built from steel, color: black.Tilt adjustment -10 degrees to 5 degrees. Max distance from wall is 56 inches.4.7 lbs..Package dimensions: 18.70" x 6.30" x 2.60".VESA 100x100 to 400x400

This single arm monitor wall mount helps clear out your desktop space and raise your monitor for a more ergonomic installation. Raising monitors to eye level helps prevent common issues such as neck, back pain, and eye strain. We utilized the best gas spring components available in the market to make the height adjustment fluid and easy. The tension on the gas spring can be increased or decreased to the adjust the amount of counterbalance for the weight of your monitors - allowing fingertip height adjustment. The full motion design allows tilt up and down, swivel left and right, as well as the ability to push the monitor towards the wall or extend them away from the wall. You can position the monitor exactly as you wish. The slide-in VESA plate allows you to install the wall mount to the wall, connect the plates to your monitor and slide the monitor into the wall mount with easy..Single Monitor Wall Mount fits most of 13"-32" Screens.Tilt, Swivel, Full Motion and Height Adjustable Features.Each monitor can tilt up 90 degrees or down 45 degrees and rotates 180 degrees.Distance From the Wall: 3.5"es min, 17.7"es max.Load capacity 14.3 lbs..Supported by manufacturer's limited lifetime warranty

If you're looking for a fully adjustable POS mounting solution for the monitor at checkout, look no further. Adjust the height of the stand from 20" to 32.3". Easily swivel it for 360 degrees. Tilt 45 degrees upwards and 15 degrees downwards to reduce glare. Rotate your POS mount from landscape to portrait mode with ease, making the payment process easier for both customers and cashiers. Securely attach the base to a countertop and protect cables by rubbing them inside the pole for a clean and organized workspace..Freshen up your checkout with this adjustable POS monitor mount.Fits up to 23" monitors.Height is adjustable from 20" to 32.3".Comes in black and made of steel.Tilt angle: +45/-15 degrees; swivel: 360 degrees; rotation: 360 degrees.Dimensions: 20"-32.3"H x 4"Dia..Compatible VESA patterns: 75mm x 75mm and 100mm x 100mm.Toolless tilt allows for an effortless positioning.Bolt-down base allows for sturdy and secure installation.Cable management allows you to hide and organize your cables inside the pole.Weight capacity: 33 lbs..Supported by manufacturer's limited lifetime warranty

This single monitor mount allows the connection of flat panel monitors through standard VESA mounting brackets. Our revolutionary hinge modules are designed to enable display monitors to be rotated, swiveled and tilted. The engineering of the AMR1AW is designed to meet high ergonomic expectation and to be rugged without compromising the aesthetics of the design. The AMR1AW is constructed with aluminum alloy to ensure sturdiness. It will support various monitor sizes as long as it weighs no more than 22.1 lbs. This product must have an appropriate wall base to support the mount fixture..Device Supported: Monitor.Maximum Load Capacity: 22.10 lb..Number of Displays Supported: 1

Make the most of tight spaces with this wall mount system made with durable polished aluminum construction. This solution accommodates an LCD and keyboard while providing vertical and side-to-side motion for easy repositioning. When not in use, simply fold the keyboard and LCD tight against the wall so it’s out of the way, yet easily accessible..Monitor Mount & Stand Type: Wall Mount System For Keyboard, LCD Monitor, Mouse.Monitor Size Supported & Number of Arms: 32" Screen Support, 2.Adjustable Minimum and Maximum Height (Inches): 13.True Color & Material: White, Metal.Articulation: Tilt Angle 75°, Rotation Angle 90°.Storage options: N/A.Weight (lbs.): 25.1.Mount Bracket or VESA Pattern: MIS-D

Choose a monitor arm that’s as adaptable as you. With the HX Wall Monitor Arm, you can reposition large monitors weighing 20 to 42 lbs. (9.1 to 19.1 kg) using patented Constant Force Technology. It enhances your workspace with a sleek design, and an optional dual or triple monitor bow kit ups your screen count and productivity. It’s BIFMA level 2 certified based on the arm’s low environmental and social impact..Monitor Mount & Stand Type: HX Wall Monitor Arm.Monitor Size Supported & Number of Arms: 49" Screen Support, 1.Adjustable Minimum and Maximum Height (Inches): 11.5.True Color & Material: White, Metal.Articulation: Tilt Angle 75°, Rotation Angle 360°.Storage options: N/A.Weight (lbs.): 11.7.Mount Bracket or VESA Pattern: MIS-D/E/F

If you're looking for a fully adjustable POS mounting solution for the monitor at checkout, look no further. Easily swivel it for 360 degrees. Tilt 45 degrees upwards and 15 degrees downwards to reduce glare. Rotate your POS mount from landscape to portrait mode with ease, making the payment process easier for both customers and cashiers. Securely attach the base to a countertop and protect cables by rubbing them inside the pole for a clean and organized workspace..Freshen up your checkout with this adjustable POS monitor mount.Fits up to 23" monitors.Comes in black and made of steel.Tilt angle: +45/-15 degrees; swivel: 360 degrees; rotation: 360 degrees.Dimensions: 19.7"H x 4"Dia..Compatible VESA patterns: 75mm x 75mm and 100mm x 100mm.Toolless tilt allows for an effortless positioning.Bolt-down base allows for sturdy and secure installation.Cable management allows you to hide and organize your cables inside the pole.Weight capacity: 33 lbs..Supported by manufacturer's limited lifetime warranty

This extremely versatile product supports up to one 24" monitor with a maximum weight of 17.5 lbs. Not only will this strong and sturdy mount have no trouble holding VESA certified 75x75 or 100x100 monitors, (fitting the above criteria), it is also very easily adjustable!.Country of Origin: Taiwan.Features: Swivel, Tilt, Rotate, Adjustable Height, Adjustable Torque.Maximum Load Capacity: 17.64 lb.

MI-31114-BLK low-profile single monitor wall mount features tilt, swivel and rotation to achieve the perfect monitor placement throughout the day. Mounting your monitor on the wall frees up desk and office space and raises your monitor to eye level, for a healthier way to work by helping you to maintain a better posture. This premium single monitor wall mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add or remove monitor-mounting arms, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. Heavy load capacity carries up to 44lbs and only requires one wall stud for easier installation. Fits monitors up to 32”..Single Monitor Wall Mount fits most of 13" -30" Screens.Tilt, Swivel, Full Motion and Articulating Features.Each monitor can swivel 180 degrees and rotates 360 degrees.Monitor can be installed either in portrait or landscape shape.Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.Supported by manufacturer's limited lifetime warranty

MI-35114 single monitor wall mount features an articulating gas spring arm for smooth full motion monitor adjustments. From height adjustment, to monitor tilt, swivel and rotation, this monitor wall mount is designed to save space while improving posture by raising the monitor to eye level in any type of environment. This premium monitor wall mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add, remove, shorten or lengthen the monitor-mounting arm, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The easy to install wall mount requires only a single stud for installation making it a quick addition to any workspace. The arm features a cable management port to hide and organize cables for a clean look. Fits monitors measuring in size up to 32” and can hold up to 19.8lbs..Single Monitor Wall Mountcompatible with screens up to 32".Tilt, Swivel, Full Motion and Articulating Features.Each monitor can tilt up or down 105 degrees and rotates 360 degrees.Load capacity 20 lbs..Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.Supported by manufacturer's limited lifetime warranty

MI-43114 dual monitor wall mount features two swivel arms for smooth full motion monitor adjustments. From monitor tilt to swivel and rotation, this monitor wall mount is designed to maximize the user’s efficiency and comfort. Boost productivity and enhance workflow with double the screen space, while improving posture and maximizing space in the office or at home. This premium dual monitor wall mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add, remove, shorten or lengthen each of the monitor-mounting arms, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The easy to install wall mount requires only a single stud for installation making it a quick addition to any workspace. Each arm features a cable management port to hide and organize cables for a clean look. Each arm can carry monitors measuring in size up to 32” and up to 19.8lbs per mounting arm..Dual LCD wall mount compatible with screens up to 30".Tilt 105 degrees, Rotate and Swivel 360 degrees.44lb total weight capacity. Sleek modern silver finish.Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.Supported by manufacturer's limited lifetime warranty

Upgrade your workstation and install your monitor at the proper height to improve posture and comfort. Adjust your screen position to improve functionality and efficiency. The articulating arm features 3 pivot points for a full range of motion. Retract, extend, tilt, and swivel to create the perfect computer or TV setup. Let your computer monitor adapt to your height and to your working style with this wall mount..MONITOR WALL MOUNTS allow you to clear valuable desktop space and to improve your posture by raising your monitor to eye level..FULL MOTION design allows you to adjust your monitor / TV to fit your viewing needs. Swivel / articulate 180 degrees, tilt up and down 15 degrees to reduce glare. Monitor can be installed either in portrait or landscape position. Tightening knob allows you to keep the display firmly in place or loosen to adjust more frequently..WALL MOUNT FOR SINGLE MONITOR set up fits most monitors in the market with the standard VESA patterns of 75x75 and 100x100. It will fit screens up to 30 inches if the monitor VESA pattern is compatible and weighs no more than 33 lbs..SIMPLE INSTALLATION, comes with everything you’ll need to securely mount your screen to a wood stud, concrete or brick wall. HEAVY-DUTY MATERIAL made from premium cold-rolled steel..Wall plate measures 1.75" W x 6" L.Supported by manufacturer's limited lifetime warranty.The MI-404 full motion wall mount allows to you clear desktop space and improves your posture by raising your monitor to eye level