Wall Mount Patch Panel Brackets

The 4U 13.78in. (35cm) deep wall-mounting bracket for patch panels and network equipment, delivers a sturdy and dependable equipment storage option, allowing you to wall mount data/IT equipment up to ta total of 44lbs. (20kg). It's the perfect solution for areas where space is at a premium like small office/home office environments or spaces with limited server room because it doesn't take up any floor space. The mounting bracket features an all-steel design and is suitable for mounting patch panels, or other slim 19in rack equipment to a wall, and to organize cabling or equipment in your network closet, wiring closet, back office or IDF. The sturdy steel construction is especially helpful for durability in harsh environments. The open frame wall rack's mounting holes are positioned 16in. apart, matching typical drywall construction framework to ensure simple and secure wall-stud anchoring. Cage nuts and screws are included with the wall-mount bracket, to save you the hassle of sourcing separate mounting hardware. The bracket is ideal for mounting equipment 12" or less in depth to ensure there is room for cabling..4U WALL MOUNT RACK: This 19 inch wide low profile wall mounted rack has a maximum mounting depth of 13.78 in [35 cm], recommended for networking equipment up to 12in deep, leaving 1.75in for cable routing; maximum weight capacity of 44 lbs. [20kg].COLD-ROLLED STEEL CONSTRUCTION: The wall mounting data rack features a solid steel design for ultimate durability and to ensure a safe and sturdy mounting solution & includes wall mounting hardware; Installs onto 16" studs with mounting holes.EASY CABLE MANAGEMENT: Built with efficiency in mind, the small wall mount patch panel bracket has rear cable routing access for easy cable organization in your network closet, server room, wiring closet, classroom.EASY TO INSTALL: The 4U wall mounting patch panel bracket ships fully assembled and comes complete with 16x M6 Screws and 16x M6 Cage Nuts for easier equipment installation, to save you the hassle of sourcing separate mounting hardware.STARTECH.COM ADVANTAGE: IT professionals choice for over 30 years; this 4U wall mount rack backed for life by StarTech.com, including free 24/5 North America based multi-lingual tech support.Mount networking equipment and shallow rackmount devices with this 4U wall-mountable rack

Tripp Lite Hinged patch panel bracket features keyholes on 16" centers plus through-the-wall cabling cut-out. Bracket is TAA compliant for GSA Schedule purchases..Compatibility: 19" EIA compliant patch panels.Dimensions: 3 1/2"(H) x 19"(W) x 6"(D).Mounting depth range: 5 1/2" - 13.97".16" center mounting.Rear cut-out for through the wall cabling.Smooth, black glossy finish.Rack size: 19".Rack units: 2U.Tripp Lite Hinged patch panel bracket measuring 3 1/2" x 19" x 6" accepts any standard 19" patch panels.

The 4XEM's 6U 19" wall-mounted open rack provides a durable and solid design. The 4XEM 6U open wall-mountable bracket features heavy gauge material to ensure a stable installation platform. The universal standard design is compatible with 19" equipment from popular manufacturers. The 6U open bracket also provides a swing hinge to allow for easy installation of equipment and cabling. It is designed specifically for small businesses, home offices, restaurants, classrooms, and IT professionals..Wall-mounted open bracket in 6U form factor is designed specifically for small business, home offices, restaurants, classrooms, and IT professionals.Dimensions: 10.56"H x 19.72"W x 12.01"D.Made of SPCC cold-rolled steel, comes in black.Meets or exceeds EIA/ECA-310-E standards.Fits 19" equipment from popular manufacturers.Keeps all networking gear organized.Saves space and permits easy access for maintenance.Swing hinge.Cable entry on both sides and rear of rack.Weight capacity: 77.16 lbs..Mounting hole types: square (for cage nut).Weight: 10.58 lbs..Fully assembled.Package contains: a wall-mount rack, 12 M6 screws/washers/nuts, and four wall anchors (concrete).1-year manufacturer limited warranty

The StarTech® WALLMOUNT8 wall-mounting bracket provides 8U of space for mounting shallow rack-mount equipment that is 12" deep. This accessory in black, is made of solid steel and offers hassle-free installation. It optimizes your working space by efficiently mounting your equipment on your wall instead of taking up desk space or other usable surface areas..Wall mounting bracket provides 8U of space for mounting shallow rack-mount equipment that's 12" deep or less to the wall.Dimensions: 14.3"H x 20.5"W x 13.7"D (product), 14.3"H x 20.5"W x 12"D (external), 13.5"H x 17.7"W (internal).Black steel.Frame type: Open frame.Rack type: 2-post.Maximum weight capacity: 80.2 lbs..Improve efficiency in your office or server room by mounting shallow equipment to the wall.Sturdy installation of mission critical equipment with solid steel design.Hassle-free setup with wall mounting holes spaced 16" apart, matching standard dry-wall framework.Rear access panel for cable management.Includes 1 x wall-mount bracket, 24 x M5 cage nuts, 24 x M5 screws with washers, 1 x M6 K-nut, 6 x wood screws, 1 x instruction manual.RoHS compliant.Weight: 17.8 lbs..Comes with lifetime warranty

The 4XEM's 4U 19" wall-mounted open rack provides a durable and solid design. The 4XEM 4U open wall-mountable bracket features heavy gauge material to ensure a stable installation platform. The universal standard design is compatible with 19" equipment from popular manufacturers. The 4U open bracket also provides a swing hinge to allow for easy installation of equipment and cabling. It is designed specifically for small businesses, home offices, restaurants, classrooms, and IT professionals..Wall-mounted open bracket in 4U form factor is designed specifically for small business, home offices, restaurants, classrooms, and IT professionals.Dimensions: 7.06"H x 19.72"W x 12.01"D.Made of SPCC cold-rolled steel, comes in black.Meets or exceeds EIA/ECA-310-E standards.Fits 19" equipment from popular manufacturers.Keeps all networking gear organized.Saves space and permits easy access for maintenance.Swing hinge.Cable entry on both sides and rear of rack.Weight capacity: 77.16 lbs..Mounting hole types: square (for cage nut).Weight: 7.5 lbs..Fully assembled.Package contains: a wall-mount rack, 12 M6 screws/washers/nuts, and four wall anchors (concrete).1-year manufacturer limited warranty

The 4XEM's 2U 19" wall-mounted open rack provides a durable and solid design. The 4XEM 2U open wall-mountable bracket features heavy gauge material to ensure a stable installation platform. The universal standard design is compatible with 19" equipment from popular manufacturers. The 2U open bracket also provides a swing hinge to allow for easy installation of equipment and cabling. It is designed specifically for small businesses, home offices, restaurants, classrooms, and IT professionals..Wall-mounted open bracket in 2U form factor is designed specifically for small business, home offices, restaurants, classrooms, and IT professionals.Dimensions: 3.56"H x 19.72"W x 12.01"D.Made of SPCC cold-rolled steel, comes in black.Meets or exceeds EIA/ECA-310-E standards.Fits 19" equipment from popular manufacturers.Keeps all networking gear organized.Saves space and permits easy access for maintenance.Swing hinge.Cable entry on both sides and rear of rack.Weight capacity: 77.16 lbs..Mounting hole types: square (for cage nut).Weight: 3.97 lbs..Fully assembled.Package contains: a wall-mount rack, 12 M6 screws/washers/nuts, and four wall anchors (concrete).1-year manufacturer limited warranty

The 4XEM's 3U 19" wall-mounted open rack provides a durable and solid design. The 4XEM 3U open wall-mountable bracket features heavy gauge material to ensure a stable installation platform. The universal standard design is compatible with 19" equipment from popular manufacturers. The 3U open bracket also provides a swing hinge to allow for easy installation of equipment and cabling. It is designed specifically for small businesses, home offices, restaurants, classrooms, and IT professionals..Wall-mounted open bracket in 3U form factor is designed specifically for small business, home offices, restaurants, classrooms, and IT professionals.Dimensions: 5.31"H x 19.72"W x 12.01"D.Made of SPCC cold-rolled steel, comes in black.Meets or exceeds EIA/ECA-310-E standards.Fits 19" equipment from popular manufacturers.Keeps all networking gear organized.Saves space and permits easy access for maintenance.Swing hinge.Cable entry on both sides and rear of rack.Weight capacity: 77.16 lbs..Mounting hole types: square (for cage nut).Weight: 5.51 lbs..Fully assembled.Package contains: a wall-mount rack, 12 M6 screws/washers/nuts, and four wall anchors (concrete).1-year manufacturer limited warranty

StarTech.com® Vertical wall mount equipment rack bracket is compatible with network device, power strip, patch panel. 5.9" x 19.8" x 2.4" Rack bracket constructed with solid steel is ideal for mounting on virtually any wall/ceiling surface..Capacity: 125.3 lbs..Compatibility: Network device, power strip, patch panel.Dimensions: 5.9"(H) x 19.8"(W) x 2.4"(D).Frame type: Open frame.Wall mountable: Yes.Rack size: 19".Rack units: 1U.StarTech.com® Vertical wall mount equipment rack bracket measuring 5.9" x 19.8" x 2.4" offers space-savings for environments lacking the footprint space for a full size server equipment rack.

The 2U 14" deep wall mounting bracket for patch panels delivers a sturdy and dependable equipment storage option, allowing you to wall mount data/IT equipment for a more efficient and accessible operating environment. It's the perfect solution for areas where space is at a premium like SoHo (small office, home office) environment, or space limited server room because it doesn't take any floor space. The mounting bracket features an all-steel design and is suitable for mounting patch panels, or other slim 19in equipment to a wall, and to organize cabling or equipment in your network closet, wiring closet, back office, or IDF. The sturdy steel construction is especially helpful for durability and stability. Also, because The open frame wall rack's mounting holes are positioned 16in. apart, allowing you a simple and secure wall-stud anchoring to your existing construction framework. M6 square cage nuts and M6 screws are included with the wall-mount bracket, additionally, M5x25 mounting screws are included to save you the hassle of sourcing separate mounting hardware. The RACK-2U-14-BRACKET is backed by a StarTech.com lifetime warranty and free lifetime technical support..2U WALL MOUNT RACK: This 19-inch wide low profile wall mounted rack has a maximum mounting depth of 14 in (35 cm), recommended for networking equipment up to 12 in deep, leaving 2 in for cable routing; Maximum weight capacity of 77 lbs. (35 kg).EASY TO INSTALL: The 2U wall-mounting patch panel bracket ships fully assembled and comes complete with M6 screws and M6 square cage nuts for easier equipment installation & includes wall mounting hardware; Predrilled wall mounting holes spaced 16" apart.COLD-ROLLED STEEL CONSTRUCTION: The wall mounting rack features a 1/16 in (1.5 mm) thick solid steel design for ultimate durability and to ensure a safe and sturdy mounting solution.EASY CABLE MANAGEMENT: Built with efficiency in mind, the small wall mount patch panel bracket has rear cable opening slot for in-wall cable routing in your network closet, server room, wiring closet, classroom.Durable wall mount rack made of cold rolled steel.STARTECH.COM ADVANTAGE: IT professionals choice for over 30 years; This 2U wall mount rack backed for life by StarTech.com, including free 24/5 North America based multi-lingual tech support.Mount equipment that is up to 14 inches deep, such as patch panels or network switches, to your wall

StarTech.com® Vertical wall mount equipment rack bracket is compatible with network device, power strip, patch panel. 5.9" x 19.8" x 4.1" Rack bracket constructed with solid steel is ideal for mounting on virtually on a wall or horizontally under a desk to save space..Capacity: 125.3 lbs..Compatibility: Network device, power strip, patch panel.Dimensions: 5.9"(H) x 19.8"(W) x 4.1"(D).Frame type: Open frame.Wall mountable: Yes.Wall mounting holes are 16" center to center for greater stability, and mounting into standard wall studs.Equipment can be vertically wall mounted, or horizontally under a desk.Rack size: 19".Rack units: 2U.StarTech.com® Vertical wall mount equipment rack bracket measuring 5.9" x 19.8" x 4.1" offers space-savings for environments lacking the footprint space for a full size server equipment rack.

This StarTech.com equipment rack bracket lets you attach your 3U rack mount equipment to a wall so that you don't have to worry about storing it in your server racks. It can hold a total of 125.3 pounds thanks to its two-post construction, and it comes with all the screws you need for easy installation..Dimensions: 5.9inch(H) x 19.8inch(W) x 5.9inch(D).Weight capacity: 125.3 lbs..Arrives fully assembled with cage screws and nuts for mounting equipment into the rack.Equipment can be vertically wall mounted, or horizontally under a desk.Compatible with most 19inch rack mountable equipmen.Rack type: 2 post.U height: 3U.Frame type: Open frame.Front door type: Open.Wall mountable.Industry standards: EIA RS310-C.Compatibility: Network device, power strip, patch panel.Package contents: Vertical wall mount bracket, cage nuts and screws, self tapping wood screws - 3/16inch x 1 1/2inch.Weight: 33.2 oz.Warranty: Lifetime limited.StarTech.com Equipment Rack Bracket - Attach Your 3U Equipment with Ease

5U Vertical Wall Mount Rack - 19in Low Profile Open Wall Mounting Bracket - Network/Server Room/Data/AV/IT/Patch Panel/Communication/Computer Equipment - w/ Cage Nuts/Screws (RK519WALLV).INDUSTRY-LEADING SUPPORT: StarTech.com offers lifetime product protection and free lifetime technical support on this wall mount patch panel bracket, and has been the choice of IT professionals and businesses for over 30 years.NO ASSEMBLY REQUIRED: The open frame, L-shaped rack kit arrives fully assembled with cage screws for mounting equipment and 1 ½” screws for mounting the rack to wood surfaces; it’s a convenient solution for all your small/home office needs.STANDARDIZED HOLE SIZING: The wall mounting holes on the 5U vertical mountable rack bracket are 16” center to center to provide greater stability and match standard wall studs; it works with most 19” rack mountable equipment for ultimate compatibility..STURDY DESIGN: Constructed to EIA-310 19 inch data rack standards, the wall mount patch panel bracket features durable solid steel construction supporting up to 200 lb. (90 kg) while ensuring equipment is mounted safely out of the way.VERSATILE FUNCTIONALITY: This TAA compliant multi-use low profile 5U vertical rack mount bracket enables servers, networking switches, patch panels or AV equipment to be mounted vertically for easy equipment access where a full rack is not desirable.Mount server, network or telecommunications devices vertically with this 5U wall-mountable rack

This rack is a perfect solution for small or home offices, and works with all 19-inch rack mount equipment. It is ideal for places where there is no room for a full size rack, as you can flush mount your equipment vertically to the wall or horizontally under a desk..Dimensions 4"(H) x 19.8"(W) x 4"(L).Maximum load capacity 70 lbs..Finish Black, textured powder coat.Material Steel.Horizontal mounting may require additional bracket depending upon equipment depth and weight.Mounts on 16" wooden, center studs.Compatibilty Most OEM slide rails Dell, HP, IBM, Apple, Sun, Intel, Cisco, Juniper, 3COM, round hole, threaded hole, and square hole equipment and slides, powerstrips, network devices, patch panels.Rack unit 2U height; Rack size 19".Certifications EIA-310.Innovation First 2URACK-119 Wall Mount Rack Bracket can be vertically mounted in any orientation and is a perfect solution for small offices or home offices.

The RACK-10U-14-BRACKET 10U 13.78 in. Deep Wall Mounting Bracket for Patch Panel delivers a sturdy and dependable equipment storage option, allowing you to wallmount equipment for a more efficient and accessible operating environment. The mounting bracket features an all-steel design and is suitable for mounting patch panels, or other slim 19in equipment to a wall..StarTech.com 10U Wall Mount Network Rack, 14 in Deep (Low Profile), 19" Patch Panel Bracket for Shallow Server.This 19 inch wide low profile wall mounted rack has a maximum mounting depth of 14 in [35 cm]..The 10U wall mounting patch panel bracket ships fully assembled and comes complete with M6 Screws and M6 Cage Nuts.The wall mounting data rack features a solid steel design for ultimate durability and to ensure a safe and sturdy mounting solution.Built with efficiency in mind, the small wall mount patch panel bracket has rear cable routing access for easy cable organization in your network closet, server room.Color come Black.Material Alloy Steel