Washer Hookup Kits
5 results
The Dormont® 20-3132-48B(BAGGED) gas dryer and water heater flex-line has durable 304 stainless steel construction and corrosion-resistant for longevity. It has built to increase flexibility quality flared end fittings to create a metal-metal seal to ensure integrity in critical applications. sure integrity in critical applications..Gas dryer and water heater flex-line is suitable for indoor and outdoor use.Helps to install home appliances like gas dryers and water heaters.Features sturdy stainless steel construction.Dimensions: 1/2" OD x 3/8" ID.Has 48" gas dryer connector for better performance.Features pressure rating up to 1/2 psi.Fits comfortably with 1/2" MIP x 1/2" FIP.Safely designed for convenient use.Comes in a polybagged for reliable usage.Meets ANSI z21.24/CSA 6.10, ANSI z21.75/CSA 6.27 certification and standards.⚠ WARNING: This product can expose you to chemicals including lead which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65warnings.ca.gov.The Dormont gas dryer and water heater flex-line is suitable for indoor and outdoor use.
The Easy-Connecting Semi-Rigid Dryer Vent Hookup Kit, 8 ft., from Deflecto means simplicity for you. The kit includes duct twists on Hooker-Upper protectors and slides over dryer vent and outlet while protecting the duct from being smashed behind the dryer. No tools, tape or clamps are required..Semi-rigid aluminum duct.Flexible strip gasket.Duct twists on Hooker-Upper protectors & slides over dryer vent & outlet pipe.Protects duct from being smashed behind dryer.No tools, tape or clamps required for installation.8ft.⚠ WARNING: This product can expose you to chemicals including Toluene, which is known to the state of California to cause cancer. For more information go to www.P65warnings.ca.gov
The Supurr-Flex Dryer Vent Kit, 8 ft., from Deflecto has everything you need to get your appliance connected. The SK8WF includes a Supurr-Vent Louvered Vent Hood with pipe and collar, semi-rigid aluminum duct and two 4 in. metal worm clamps..8ft run of duct is UL 2158AKit includes:.Hood.Pipe.Collar.⚠ WARNING: This product can expose you to Tris (1,3-dichloro-2-Propyl) phosphate, which is known to the state of California to cause cancer. For more information go to www.P65warnings.ca.gov
Lambro's 4-In. x 8-Ft. UL 2158A Transition Duct Louvered Vent Kit is UL 2158A certified. This means it is highly recommended for clothes dryer venting applications. The complete kit allows for venting from the dryer to the outside wall..Opening/closing flaps prevents outside elements from entering the vent.Flexible laminated foil design for easier installation.Ideal for both gas and electric dryer installations.UL 2158A listed and labeled as a clothes dryer transition duct.UV inhibitor is used to help prevent the premature fading of vent.Includes 4 in. white plastic louvered vent with 11 in. tail pipe, 4 in. white plastic trim plate, 4 in. x 8 ft. UL 2158A laminated transition duct, and 4 in. galvanized tension clamps
50 Pack 10-32 Server Rack Cage Nuts and Screws w/Washers - Rack Mount Hardware Kit - Network/IT Equipment Cabinet Clip/Captive Nuts & Bolts for Square Holes - Black - TAA (CABSCREW1032).COMPLIANT WITH INDUSTRY STANDARDS: Clip/Captive nuts & bolts are easy to install and are compatible with virtually any rack & equipment, including HPE, Dell, APC & more.PROFESSIONAL HIGH QUALITY DESIGN: Rack mount hardware kit made from high-quality steel and finished in matte black; includes pre-installed washers to help prevent damage to valuable racks & equipment.STARTECH.COM ADVANTAGE: IT professionals choice for over 30 years; these cage nuts & screws for square holes are backed for 5 yrs. by StarTech.com, including free 24/5 North America based tech support.TAA COMPLIANT 10-32 CAGE NUTS & SCREWS: 50 pack of server rack cage nuts and screws uses 10-32 threads (imperial measurements) and comes with an installation tool.TECH SPECS: 50x Cage Nuts | 50x Screws | 10-32 Thread | Steel | Matte Black Finish | Cage Nut Installation Tool Included.Rack Mount Cage Nuts and Screws | 10-32 | Black
You May Also Like
The Semirigid Flexible Aluminum Duct (4 in. x 8 ft.) from Deflecto is meant for multiple uses--dryer, bathroom or kitchen. Its semirigid construction makes it flexible enough for easy installation..Fire-resistant aluminum.4" dia x 8ft length.Nonretail bulk
Lambro's space saving TiteFit 90 Degree Rectangular Aluminum Dryer Duct is ideal for use in tight clothes dryer installations. The duct allows for the dryer to be placed 3 in. from the wall for optimum space utilization. The 2 piece aluminum construction allows for these ducts extend from 24 in. to 41 in. in length. This item is ideal for laundry closets where space is limited..Tight space dryer venting solution ideal for limited space behind dryer.Extends from 24 in. to 41 in. to accommodate installation needs.90° connections allow for tight space installations.Ideal for laundry closet installations.Installation requires two 4 in. worm drive clamps (sold separately)
The Semi-Rigid Flexible Aluminum Duct (6 in. dia x 8 ft.) from Deflecto is meant for multiple uses--dryer, bathroom or kitchen. Its semi-rigid construction makes it flexible enough for easy installation..6" dia x 8ft length.Fire-resistant aluminum.Multiple uses - dryer, bathroom or kitchen
The Deflecto® EZDOCK dryer easy dock features push-pull design for easy installation and simplifies the connection of a clothes dryer to an exhaust vent. Measures 5 15/16" x 6" x 5" and provides quick and easy clean out..Dimensions: 5 15/16"H x 6"W x 5"D, Quick Connect Dimensions: 4".Push-pull design for convenience.Easy to install.Easy to clean out quickly.Weight: 0.3 lbs..Deflecto® Dryer easy dock measures 5 15/16" x 6" x 5" and offers 4" quick connection. Provides easy installation.
The Lambro® 289 W dryer-vent seal in off white features ABS plastic construction for strength and durability. Comes with floating shuttle to remain closed unless dryer is in use and fits for 13" x 6 1/2" x 7" vent..Comes in new white color and is made of durable plastic material.Vent Dimensions: 13"H x 6 1/2"W x 7"D, Pipe Dimensions: 4".Replaces traditional dryer vent hoods.Floating shuttle remains closed unless the dryer is in use.Vent keeps out unwanted elements.Paintable to match any home.Positive seal keeps cold or hot air out as well as unwanted pests.Floating shuttle is designed to remain closed unless dryer is in use.Weight: 1.85 lbs..Lambro® Dryer-vent seal replaces the conventional dryer vent hoods and keeps cold or hot air out as well as unwanted pests. Installs using 4" pipe.
The Deflecto® DVBRUSH12K/6 cleaning kit helps to extend the life of your dryer and cleans with or without a drill. Contains six white rods with black brush to remove dangerous lint build-up and is suitable for dryer duct of 12' to clean properly..Dryer duct cleaning brush kit reduces drying time of dryer.Aluminum construction with black brush and white rods for durability.Duct Dimensions: 12' x 4" dia.Reduces drying time.Helps extend the life of dryer.Works with or without a drill.6 x 24" rods for flexibility.Adjusts up to 120" for convenience.This Deflecto® cleaning kit includes six 24" flexible rods helps to clean the clothes dryer duct. Reduces drying time of dryer.
Lambro's premium semi-rigid aluminum flexible yet rigid patented duct is recommended over conventional semi-rigid and foil ducts. This duct is suitable for all general purpose venting applications. The duct requires no elbows as it can form tight 90 degree turns. The complete kit allows for venting from the appliance to the outside wall..UL 2158A Certified.Airtight design.Fire resistant.Improved airflow.Highly flexible.Installer friendly.Patented.Uninsulated.Operating temperature range: -86°F to 482°F.Max. velocity: 5,000 FPM.Includes duct, vent, pipe, and clamps
Lambro's premium semi-rigid, aluminum, flexible yet rigid patented duct is recommended over conventional semi-rigid and foil ducts. This duct requires no elbows as it can form tight 90 degree turns requiring less space to work. The design creates airtight seams and prevents unraveling while handling. The duct is reinforced with bead wire helix to always maintain its round shape. This duct is suitable for all general-purpose venting applications including exhaust venting, bathroom fan venting, range hoods and more. It is installer friendly and can be uncompressed easily for installation. Unlike conventional semi-rigid ducts that take up large amounts of space, the duct has a compact compression that is 4 times smaller than the current duct in the market. This reduces space needed for transportation, warehouse, and shelf space in store..Airtight design.Fire-resistant.Class 0 air duct.Improved airflow.Highly flexible.Installer friendly.Patented.Uninsulated.Operating temperature range: -86°F to 482°F.Max. velocity: 5,000 FPM
The Semi-Rigid Aluminum Duct (4 in. x 5 ft.) from Deflecto is for multiple uses--dryer, bathroom or kitchen venting. Its semi-rigid design makes it flexible for easy installation. It is also fire-resistant to ensure your safety..Semi-rigid yet flexible for easy installation.Fire-resistant.Aluminum.4" dia x 5ft.Nonretail bulk
Lambro's 4-In. x 8-Ft. UL 2158A Transition Duct Vent Kit is UL 2158A certified, meaning it is highly recommended for clothes dryer venting. It is ideal for both gas and electric dryer installations. The complete kit allows for venting from the dryer to the outside wall..Opening/closing damper prevents outside elements from entering the vent.Removable screen.Flexible laminated foil design for easier installation.Ideal for both gas and electric dryer installations.UL 2158A listed and labeled as a clothes dryer transition duct.UV inhibitor is used to help prevent the premature fading of vent.Includes 4 in. white plastic preferred hood vent with 11 in. tail pipe, 4 in. white plastic trim plate, 4 in. x 8 ft. UL 2158A laminated transition duct, and 4 in. galvanized tension clamps
The Supurr Guard Louvered Vent Hood from Deflecto is a 4 in. white hood, pipe and collar that comes assembled. It includes a removable built-in bird and rodent guard for easy cleaning with tools. The vent hood also includes a lifetime guarantee..4" white hood, pipe & collar.Assembled.Removable built-in bird & rodent guard for easy cleaning with tools
The Aluminum Duct (Supurr-Flex Transition Ducting, 5 ft.) has a 4 in. dia. and 2 spring clamps. This clothes dryer transition duct is UL listed 2158A..4" diameter.UL 2158A.Includes 2 clamps.Nonretail polybag.Supurr-Flex transition ducting.5 ft..⚠ WARNING: This product can expose you to Tris (1,3-dichloro-2-Propyl) phosphate, which is known to the state of California to cause cancer. For more information go to www.P65warnings.ca.gov
The Semi-Rigid Flexible Aluminum Duct (5 in. x 8 ft.) from Deflecto is meant for multiple uses--dryer, bathroom or kitchen. Its semi-rigid construction makes it flexible enough for easy installation..5" dia x 8ft length.ire-resistant aluminum.Multiple uses - dryer, bathroom or kitchen
The Deflecto® FM0450 duct is made of flexible aluminum for added strength and durability. Measures 4" diameter x 50' and comes with markings on each foot for easy measurement..Flex duct for various venting purposes.2 Ply aluminum construction for durability.Dimensions: 50"L x 4" diameter.Markings each foot for easy measurement.Aluminum duct for flexibility.For use as bath fan exhaust duct.Weight: 4 lbs..⚠ WARNING: This product can expose you to Carbon Black, which is known to the state of California to cause cancer. For more information go to www.P65warnings.ca.gov.Deflecto® Duct has a length of 50' is perfect to used as bath fan exhaust. Offers easy installation.
Take care of ducts with a Vinyl Duct Kit (5 ft.). Not recommended for dryer venting, the polybagged kit includes a white vinyl hose and 2 plastic clamps..White vinyl hose.2 plastic clamps.4" dia.Not recommended for dryer venting.Polybagged
Lambro's premium semi-rigid, aluminum, flexible yet rigid patented duct is recommended over conventional semi-rigid and foil ducts. This duct requires no elbows as it can form tight 90 degree turns requiring less space to work. The design creates airtight seams and prevents unraveling while handling. The duct is reinforced with bead wire helix to always maintain its round shape. This duct is suitable for all general-purpose venting applications including exhaust venting, bathroom fan venting, range hoods and more. It is installer friendly and can be uncompressed easily for installation. Unlike conventional semi-rigid ducts that take up large amounts of space, the duct has a compact compression that is 4 times smaller than the current duct in the market. This reduces space needed for transportation, warehouse, and shelf space in store..Airtight design.Fire-resistant.Class 0 air duct.Improved airflow.Highly flexible.Installer friendly.Patented.Uninsulated.Operating temperature range: -86°F to 482°F.Max. velocity: 5,000 FPM