Wiha Screwdriver Sets
3 results
Wiha® Tools 7-Piece screwdriver set includes drivers of size 00/0/1 Phillips® tip and 1.5 mm/2 mm/2.5 mm/3 mm wide slotted tip. Screwdriver is 10.2" long and features round shank with non-slip vapor hard chromed satin tip..Tip size: #00 - #1, 1.5-3 mm Width.Number of Piece: 7.Tip type: Phillips, Slotted.Shank type: Round.Exact fit precision machined tips.Vapor hard chromed satin non slip tips.Hardened for maximum durability.All handles are molded onto blades.Spin free finger control caps.Includes: 1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm slotted, #00, 0, 1 Phillips.⚠ WARNING: This product can expose you to PVC/PET/Ni/CrVI, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.Wiha® Tools 7 Pieces Phillips Slotted Tip Precision Tool Set has precision screwdrivers and torque control set.
Wiha® Tools 4-Piece insulated tool set includes drivers of size 1/2 Phillips® tip and 3"/5" slotted tip. Tool is 12 1/2" long and features round shank with insulated molded handle that offers shock-resistance..Tip size: #1, #2, 9/64-inch, 3/16-inch.Number of Piece: 4.Tip type: Phillips, Slotted.Shank type: Round.Handle and insulation molded on for maximum durability.Wiha® special CRM-72 tool steel blades.Super hardened and tempered for long life performance.Guaranteed quality made by Wiha®.Includes: 3-inch, 7/32 x 5-inch slotted, #1 x 3 3/16-inch, #2 x 4-inch Phillips.⚠ WARNING: This product can expose you to PVC/PET/Ni/CrVI, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.Wiha® Tools 4 Pieces Phillips Slotted Tip Insulated Combination Tool Set is precision machined for an exact fit and intended for protection from accidental tool contact with voltage up to 1000 volts.
Wiha® Tools 39-Piece security insert bit set includes Hex, Phillips®, Torx® pozidriv, slotted, square, torq-set and spanners. 8.4" Bit features 4" long round shank and has a hole drilled in center to fit over security pin..Number of Piece: 39.Tip type: Hex, Phillips, Pozidriv, Slotted, Square, Torq-Set and Spanner.Shank type: Round.Shank size: 4-inch Length.Hole drilled in center of bit fits over security pin.Made from Wiha® CRM-72 modified tool steel.Natural finish and machined onto 1/4 hex.Guaranteed quality; Made in Germany.Includes: 5/64-inch, 3/32-inch, 7/64-inch, 1/8-inch, 9/64-inch, 5/32-inch tr- hex, tr8, 10, 15, 20, 25, 27, 30, 40 tr-torx, #4, #6, #8, #10 spanner, #1, #2, #3, #4 tri-wing, #6, #8, #10 torq-set, standard bits: #1, #2, #3 square, #0, #1, #2, #3 pozidriv, 6.5 mm, 8.0 mm slotted, #1, #2 Phillips, bit holding handle, 1/4-inch magnetic driver, 1/4-inch bit holding socket.⚠ WARNING: This product can expose you to PVC/PET/Ni/CrVI, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.Wiha® Tools 39 Pieces Security Hex Insert Bit Set has an ergonomically designed handle and is hardened for high torque performance.
You May Also Like
HV Tools Screwdriver Set is perfect for Computer, TV set, Radio, Camera, High technology instruments and all kinds of electronic and precision units..Screwdriver Set.2 x 4 x 14.High technology instruments and all kinds of electronic and precision units.
This Workpro Slotted Screwdriver #3x6" shaft is made from high-strength heat treated chrome vanadium steel and is protected by a corrosion-resistant chrome plated finish. Precisely milled for exact fit in screw head, the tip is magnetized to hang onto screw, preventing it from being dropped and making 1-handed installation easy. Its iconic soft-grip handle ensures maximum comfort and torque on any project..Chrome-vanadium blade.Black magnetic tip.Ergonomic comfort grip handle
HVTools HV100 9pcs Screwdriver Set is perfect for Computer, TV set, Radio, Camera, High technology instruments and all kinds of electronic and precision units..This high quality HVTools 9pcs Screwdriver Set.perfect for Computer, TV set, Radio, Camera, High technology instruments and all kinds of electronic and precision units..Easy to use
General tools® Ratchet offset screwdriver set includes a wide selection of insert bits and sockets to offer enhanced performance. Screwdriver set has offset handle that allows for easy access to screws positioned at odd angles..Overall length: 9".Material: Chrome vanadium steel.Finish: Full polish.Dimensions: 1"(H) x 4.25"(W) x 9"(L).Great for applying additional leverage to a fastener during removal or installation.72 tooth ultra-fine ratchet has a compact, 5 degree swing radius.Offset head provides greater leverage when working in obstructed areas.Ratchet-drive handle reverses instantly for clockwise and counterclockwise rotation.Accepts industry standard bits and socket adapters.Cushion grip allows for hours of comfortable use.Includes 10 alloy steel bits: 0.25" and 0.1875" Slotted, No. 1 and No. 2 Phillips bits, T15 and T20 Torx, 0.125" and 0.15" Hex, #1 #2 square recess and 6 sockets.Weight: 0.57 lbs..General tools® Ratchet offset screwdriver set is perfect for reaching screws in obstructed areas and is great for applying additional leverage to a fastener during removal/installation.
The Lenox 6-in-1 Multi-Bit Screwdriver with in-handle storage has a dual-sided removable shaft offering 3/8-in. and 5/16-in. nut driving capability. Its slip-resistant grip and acetate handle provide added control, torque, and durability. Bits include Phillips? #1 and #2, slot 3/16 in. and 1/4 in., and nut drivers 5/16 in. and 3/8 in..6-in-1 versatility with in-handle storage.Dual-sided removable shafts offer 3/8-in. and 5/16-in. nut driving capability.Slip-resistant grip and acetate handle for added control, torque, and durability.Includes Phillips #1, #2, slot 3/16 in. and 1/4 in. bits, and nut drivers 5/16 in. and 3/8 in.
HV Tools Screwdriver Set with Magnifier is perfect for Computer, TV set, Radio, Camera, High technology instruments and all kinds of electronic and precision units..Screwdriver Set with Magnifier.1 x 6 x 9.High technology instruments and all kinds of electronic and precision units.
Profilated® Screwdriver features 3" long chrome plated round steel shank and size 1 wide Phillips® tip. Screwdriver is 6 3/4" long and has patented Tip-Ident® to identify the type of screwdriver/tip orientation..Tip type: Phillips.Tip size: #1 width.Length: 6 3/4 in.Shank type: Round.Shank size: 3 in length.Cushion-grip handle allows for greater torque and comfort.Patented Tip-Ident® quickly identifies the type of screwdriver and screwdriver tip orientation; Special heat-treated shafts.Premium chrome plated for smooth feel and corrosion resistance; Precision-machined tip for exact fit and to provide a more consistent geometric symmetry than conventional Phillips-tip screwdrivers.Internal flanges inside handle provide solid, twist-resistant blade anchor.Provides accurate fit and torque without slippage.⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.Profilated® Chrome Plated Steel Shank Screwdriver provides accurate fit and torque without slippage.
Eklind® Tool Precision Screwdriver Set rotating has bigger, tapered, ergonomic handle that is designed to offer professionals comfort as well as control and end-caps maintain fingertip control..Tip Size: #000 - #1, 1 - 4 mm.Number of Piece: 10.Spinner-cap for precise control.Precision machined tip.Sizes marked permanently on cap.Oil and chemical resistant.Soft and Ergo grip.Big and comfortable handle.Includes: #0, #00, #000, #1, 1 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm width tip.Non-Woven rayon backing.Silicone coated paper liner.Blends with skin tone, not very visible.Comfortable to wear.Less chance of infection or scarring when compared to sutures or staples.Fast application.Reduces likelihood of skin irritation.Porous, nonwoven, rayon-backed material Hypoallergenic adhesive.Appropriate for low tension wounds. For use in-Emergency Department Operating Room Clinics and physicians offices, Same-Day surgery centers
Klein Tools® 6-Piece Screwdriver set features chrome plated shank with precision-machined tip and a comfortable cushion grip plastic handle. Set includes 601-3 cabinet tip, 600-4/600-6 keystone tip and 603-3/603-4/603-6 Philips® tip screwdrivers..Finish: Chrome plated shank.Number of piece: 6.Specification: ASME/ANSI.Cushion-grip handle allows for greater torque and comfort.Patented Tip-Ident® quickly identifies the type of screwdriver and screwdriver tip orientation.Premium chrome plated for smooth feel and corrosion resistance; Internal flanges inside handle provide solid, twist-resistant blade anchor.Precision-machined tip for exact fit; Special heat-treated shafts.Includes one cabinet-tip, two keystone-tip, and three Phillips-tip screwdrivers; Contains: 601-3 round-shank and cabinet-tip, 600-4, 600-6 square-shank and keystone-tip, 603-3, 603-4, 603-6 round-shank and philips-tip and a reusable plastic container.Weight: 1 1/2 lb..Internal flanges inside handle provide solid, twist-resistant blade anchor.Special heat-treated shafts.⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.Klein Tools® 6 pcs Cushion Grip Screwdriver Set is precision-machined tip for exact fit.
Eklind® Tool Hex-L® Long arm hex key set has black oxide finished pieces made of chrome nickel alloy steel to resist corrosion. Hex key set is heat treated for added strength and is enclosed in a plastic holder..Size: 0.05 - 3/8-inch, 1.5 - 10 mm.Number of Piece: 22.Handle Type: L-Handle.Material: 8650 Chrome Nickel Alloy Steel.Finish: Black Oxide.Produced from 8650 chrome nickel alloy steel.Heat-treated for superior strength.Hex Corners are Sharp and Clean.Finished to resist rust.Color coded compact holders.Includes: 0.050 in, 1/16 in, 5/64 in, 3/32 in, 7/64 in, 1/8 in, 9/64 in, 5/32 in, 3/16 in, 7/32 in, 1/4 in, 5/16 in, 3/8 in, 1.500 mm, 2 mm, 2.500 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm, plastic holder.Eklind® Tool Hex-L® Long arm hex key set includes 22 pieces of L-handles with hexagonal tip size ranging from 0.05" - 3/8" and 1.5 - 10 mm.
The Klein Tools 5-in-1 Multicomponent Screwdriver/Nutdriver (409-32476) is a versatile tool designed for convenience and durability. Featuring a cushion-grip handle, it provides a secure and comfortable grip for extended use. The interchangeable design includes #1 and #2 Phillips bits, 1/4-inch and 3/16-inch slotted screwdrivers, and a 5/16-inch nut driver, making it perfect for a variety of fastening tasks. With a 7.75-inch overall length, this screwdriver/nut driver offers the right balance of reach and control. The black and yellow finish adds a sleek and professional look, making it a reliable addition to any toolkit..Type: 5-In-1, multi bit.Handle type: Cushion grip.Material: Steel shank.Finish: Chrome plated shank.Specification: ASME/ANSI.Cushion-grip handle allows for greater torque and comfort; End of handle is marked to quickly identify tool.Patented Tip-Ident quickly identifies the type of screwdriver and screwdriver tip orientation; Special heat-treated shafts.Premium chrome plated for smooth feel and corrosion resistance; Precision-machined tip for exact fit.Internal flanges inside handle provide solid, twist-resistant blade anchor.Contains: 5/16 in nut driver, #1 and #2 Phillips, 9/32 in slotted and 3/16 in slotted.Special heat-treated shafts.⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
The 21-in-1 Twist-A-Nut Ratcheting Screwdriver by IDEAL is a great tool to handle many needs. It has a wire connector wrench that accepts a variety of connectors and reduces finger fatigue. The pro-quality, 28-tooth, all-metal ratchet can handle 225 lbs. of torque without fail. The ergonomic, slip-free textured grip provides excellent torque and is impervious to perspiration, gas, oil and chemicals, and there is even a convenient bit storage unit located in the handle..Screwdriver with 6 bits.Neon handle Set includes:.1/4" slotted.3/16" slotted.#2 Phillips.#1 Phillips.T15 star-style bit.T20 star-style bit.⚠ WARNING: Cancer and Reproductive Harm - WWW.P65warnings.ca.gov
Profilated® Screwdriver features 4" long chrome plated round steel shank and size 2 wide Phillips® tip. Screwdriver is 8 5/16" long and has patented Tip-Ident® to identify the type of screwdriver/tip orientation..Tip size: #2 width.Length: 8 5/16 in.Shank type: Round.Shank size: 4 in length.Cushion-grip handle allows for greater torque and comfort.Patented Tip-Indent® quickly identifies the type of screwdriver and screwdriver tip orientation; Special heat-treated shafts.Premium chrome plated for smooth feel and corrosion resistance; Precision-machined tip for exact fit and to provide a more consistent geometric symmetry than conventional Phillips-tip screwdrivers.Internal flanges inside handle provide solid, twist-resistant blade anchor.Provides accurate fit and torque without slippage.Tip type: Phillips.Patented Tip-Ident® quickly identifies the type of screwdriver and screwdriver tip orientation.Premium chrome plated for smooth feel and corrosion resistance.Special heat-treated shafts.⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.Profilated® Chrome Plated Steel Shank Screwdriver provides accurate fit and torque without slippage.
Bondhus® 9 Pieces Ball End Stubby Hex Key Set, 1.5-10 mm.Size: 1.5-10 mm.Handle type: L-Handle.Number of Piece: 9.Material: Steel.Finish: ProGuard.Smaller inside radius for tight spaces.Allows lower clearance.Balldriver® tip on long arm for angle entry to 25° and fast screw removal.Stubby hex keys provide the same advantages as a full size hex key, but reach areas where overhead clearance is tight.Includes: 1.5 mm, 2 mm, 2.500 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm, bondhex color coded case.Bondhus® Stubby Hex Key Set ahs hex keys that provide the same advantages as a full size hex key, but reach areas where overhead clearance is tight.
HV Tools 6 Inch Adjustable Wrench is a must have for any toolbox and ideal for contractors, homeowners and DIYers. Constructed from drop forged, heat treated carbon steel with a chrome plated finish that resists corrosion. Precision-machined jaws will smoothly adjust and fit securely on nuts and bolts. A cushioned, non-slip handle grip is comfortable to use..6 Inch Adjustable Wrench.1 x 4 x 10.Constructed from drop forged, heat treated carbon steel with a chrome plated finish that resists corrosion..Precision-machined jaws will smoothly adjust and fit securely on nuts and bolts. A cushioned, non-slip handle grip is comfortable to use.
HV Tools 11 pcs Hand Screwdriver Set is perfect for Computer, TV set, Radio, Camera, High technology instruments and all kinds of electronic and precision units..11 pcs Hand Screwdriver Set.2 x 6 x 7.High technology instruments and all kinds of electronic and precision units.