100 Mbps Cable

Digiwave CAT621100G CAT6 500Mhz Network Cable is uses for connecting a PC, Mac or network device to 10/100/1000 Ethernet networks. Gold-plated copper contacts on the RJ45 male to male connectors provide excellent conductivity for accurate high-speed transmissions. Constructed with high quality material to protect the RJ45 plug of the cable from damage during installation..Patch Network Cable is uses for connecting a PC, Mac or network device.Provide excellent conductivity for accurate high speed transmissions.Constructed with durable material to protect the RJ45 plug of the cable from damage.Delivers reliable performance.Manages to take minimal wall space with its soft and flexible external jacket.Deliver optimum conductivity while eliminating signal loss due to oxidation.High speed transfer rate.Support power over Ethernet.Patch Network Cable for 10/100/1000 Ethernet networks.Cable is ready for use with RJ45 connector installed

Digiwave CAT621050G CAT6 500Mhz Network Cable is uses for connecting a PC, Mac or network device to 10/100/1000 Ethernet networks. Gold-plated copper contacts on the RJ45 male to male connectors provide excellent conductivity for accurate high-speed transmissions. Constructed with high quality material to protect the RJ45 plug of the cable from damage during installation..Patch Network Cable is uses for connecting a PC, Mac or network device.Provide excellent conductivity for accurate high speed transmissions.Constructed with durable material to protect the RJ45 plug of the cable from damage.Delivers reliable performance.Manages to take minimal wall space with its soft and flexible external jacket.Deliver optimum conductivity while eliminating signal loss due to oxidation.High speed transfer rate.Support power over Ethernet.Patch Network Cable for 10/100/1000 Ethernet networks.Cable is ready for use with RJ45 connector installed

Monoprice® 100' Cat5e UTP Ethernet network cable with a data transfer speed of 350 MHz has 50 micrometer gold plated contacts for enhanced conductivity. Cable in white color has snagless strain relief boots and provides reliable performance..White.Cat5e.Fixed length network cables are the perfect combination of value and performance.100'.Connector: Connector on first end: 2 x LC Male, connector on second end: 2 x LC Male.Gauge: 24 AWG.Cable rating: 350 MHz.Gold-plated connectors.Technology: Unshielded twisted pair (UTP).Cables are made of 100% bare copper wire, as opposed to copper clad aluminum (CCA) wire.Each cable features color matched, snagless, strain-relief boots.Device supported: Network device.Certificates & standards: UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards.Monoprice® 100' Cat5e UTP Ethernet network cable in white color is constructed from 24 AWG stranded pure bare copper conductor for long lasting durability.

Avoid having excess Ethernet cable lying around by building your own cables to the exact length needed using this Bulk Ethernet Copper Cable from Monoprice! Features: Unshielded Twisted Pair (UTP) Category 5e Ethernet cable 24AWG solid, pure bare copper conductors CMR (Riser) fire safety rating 350MHz bandwidth 1000 foot roll Monoprice Ethernet cables are made of 100% pure bare copper wire, as opposed to copper clad aluminum (CCA) wire, and are therefore fully compliant with UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards, which require pure bare copper wire in communications cables..Ensures fast signal transmission with minimal interference.Durable construction designed for long-term use.Flexible design allows easy installation and space savings

50' cable.Black.1 per pack.Ideal for a high speed Internet access and home/small office networking.Up to 100MB per seconds for high bandwidth - perfect for audio/video distribution.Perfect in conjunction with 100 Base-T and Gigabit Ethernet networks.Available in 3', 7', 14', 25' & 50' sizes.Black

The N222-01K-WH Cat6 Gigabit Bulk Solid-Core PVC Cable is premium high-speed cabling designed for Cat6 premise applications, such as the distribution of data, voice and digital video across Gigabit Ethernet networks. Designed for fast transmission and excellent signal quality, this white cable ensures peak performance through your LAN (local area network).Manufactured from 23 AWG copper wire, the four-pair solid UTP N222-01K-WH delivers speeds up to 550 MHz/1 Gbps. Protected by a CMR-rated PVC jacket, this cable drastically reduces impedance and structural return loss as compared to standard 100 MHz wire. Near-end crosstalk levels are kept to a minimum, making the N222-01K-WH ideal for 10/100/1000 Base-T Ethernet, 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice, EIA/TIA and Token Ring Type 3 applications.The N222-01K-WH meets most current industry standards, including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801 and ETL (category 6, draft 11)..CMR-rated PVC jacket.High-quality 23 AWG 4-pair solid copper wire.Less impedance and structural return loss than 100 MHz wire.Meets IEEE 802.3ab and ANSI/EIA/TIA 568 standards.Rated for 550 MHz/1 Gbps communications

The Tripp Lite N222-01K-BK 1000' bulk solid-core PVC cable in black, has less impedance and structural return loss than 100 MHz wire. It transfers data at a rate of 128 Mbps..Bulk cable is Ideal for 10/100/1000 Base-T Ethernet, 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice, EIA/TIA and Token Ring type 3 applications.Dimensions: 1000' cable length.Black CMR-rated PVC jacket.Conductor: 23 AWG 4 twisted pairs solid bare copper.Connections: 1 x bare wire on both ends.Data transfer rate: 1 Gbps.Designed for distributing data, voice and digital video across Gigabit Ethernet networks.Minimum near-end crosstalk.Bandwidth: 550 MHz.RoHS compliant.Comes with lifetime limited warranty

The GE CAT-5E Cable, 50ft connects high-speed Internet to streaming A/V and gaming applications up to 100MB per sec. It is intended for use with all brands. It comes with a lifetime warranty and is 50 ft. long..Connects high-speed Internet to streaming A/V & gaming applications.Other (360015).For use with all brands.Lifetime warranty.Black.50ft

Avoid having excess Ethernet cable lying around by building your own cables to the exact length needed using this Bulk Ethernet Copper Cable from Monoprice! Features: Unshielded Twisted Pair (UTP) Category 5e Ethernet cable 24AWG solid, pure bare copper conductors CMR (Riser) fire safety rating 350MHz bandwidth 500 foot roll Monoprice Ethernet cables are made of 100% pure bare copper wire, as opposed to copper clad aluminum (CCA) wire, and are therefore fully compliant with UL Code 444 and National Electrical Code TIA-568-C.2 fire and safety standards, which require pure bare copper wire in communications cables..Ensures fast signal transmission with minimal interference.Durable construction designed for long-term use.Flexible design allows easy installation and space savings

The C2G® 10' male to male category 6 blue snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Ethernet network patch cable is suitable for high performance networking applications.Cable length: 10'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 4 twisted pair 24 AWG stranded bare copper, Construction: Polycarbonate connector.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in blue color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.25 lbs..Comes with lifetime warranty

Experience fast, dependable transmission speeds from this patch cable. The PVC jacket insulates the stranded copper wires inside this Belkin CAT5e Ethernet patch cable against damage, while the molded strain relief prevents fraying..CAT-5e Ethernet patch cable with extra headroom for connecting to LANs or the Internet.32.81' cable length.RJ45 plugs with 50-micron gold-plated connectors.Features four unshielded twisted pair (UTP) 24 AWG stranded copper wires to reduce electromagnetic interference.Meets the CAT5e standard and is suitable for use with 100/1000BASE-T networks.Wires are housed in a durable PVC outer jacket for abrasion and corrosion resistance.Snagless design prevents cracking and breaking.Ensure a reliable connection between your computer and networking devices with this Belkin CAT5e Ethernet patch cable.

Digiwave EM746075 75 ft. Cat5e 350Mhz Network Cable is uses for connecting a PC, Mac or network device to 10/100/1000 Ethernet networks. Gold plated copper contacts on the RJ45 male to male connectors provide excellent conductivity for accurate high speed transmissions. Snagless molded boot covers protect the RJ45 plug of the cable from damage during installation..Cat5e Network Cable.75 ft..Snagless booted connectors.350Mhz transfer rate.One year manufacture warranty

10ft Cat6 Snagless Unshielded Network Patch Cable - Gray.Cable length: 10'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 4 twisted pair 24 AWG stranded bare copper, Construction: Polycarbonate connector.Gray.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in gray color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.29 lbs..Comes with lifetime warranty

14' long.Gray.1 each.Ideal for a high speed Internet access and home/small office networking.Up to 100MB per seconds for high bandwidth - perfect for audio/video distribution.Standard RJ45 connectors

Connect your laptop to a LAN or Internet using this patch cable. Compatibility with CAT-5e standards delivers speeds of up to 1000MB/s, while the stranded copper wires in this Belkin Ethernet patch cable minimize electromagnetic interference to improve transmission quality..CAT-5e Ethernet patch cable with extra headroom for connecting to LANs or Internet.16.4' cable length.RJ45 plugs with 50-micron gold-plated connectors.Features four unshielded twisted pair (UTP) 24 AWG stranded copper wires to reduce electromagnetic interference.Meets or exceeds the CAT-5e standard.Suitable for use with 100/1000BASE-T networks.Wires are housed in a durable PVC outer jacket for abrasion and corrosion resistance.Snagless design prevents cracking and breaking.Enjoy noise-free transmissions with this Belkin Ethernet patch cable.

1 each.Up to 100MB per second for high bandwidth.Ideal for high-speed Internet access, home/small-office networking and audio/video distribution

Enable high internet speeds with this 16.4-foot CAT-6 pitch black cable. The 50-micron gold-plated connectors on this Belkin 16.4-foot CAT6 pitch black cable help deliver a clear signal, while the snagless design helps prevent damage..CAT-6 Ethernet patch cable for connecting to LANs or Internet.Cable Length: 16.4 ft..RJ-45 plugs with 50-micron gold-plated connectors for clear signals.Comes in black color.Four twisted pairs of stranded copper wires prevent crosstalk.Snagless design prevents cracking and breaking.Allows you to connect a laptop or a desktop computer to a wall outlet, modem, router, or another networking device.Suitable for use with 100/1000BASE-T networks.2-year manufacturer limited warranty.Connect a wide array of devices to your network with this Belkin 16.4-foot CAT-6 pitch black cable.

The Tripp Lite 1' black Cat6 Gigabit snagless molded patch cable features RJ-45 gold-plated male connectors on both the ends for clean and clear transmission. It has four twisted pairs 24 AWG stranded copper conductor for better conductivity and PVC jacket for added durability. Patch cable has molded connectors with integral strain relief added security and durability. It is great for 1000Base-T, 10/100Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice and token ring type-3 applications. Cable featuring data transfer rate of 1 Gbps, is suitable for use with computers, printers, video game systems, Blu-ray players, copy machines, routers and modems. Snagless design of cable effectively avoids locking connector tabs from damage while installing..Cat6 gigabit snagless molded patch cable is perfect for home or office.Cable length: 1'.Connections: One RJ-45 male connector on both ends.PVC jacket for added durability and 4-pair 24 AWG stranded copper conductor for excellent signal transmission.RoHS compliant.Gold-plated copper contacts for maximum conductivity.Compatible with computers, printers, video game systems, Blu-ray players, copy machines, routers and modems.Comes in black color.Data transfer rate: 1 Gbps.Bandwidth: Rated for 550 MHz.Snagless design aids to avoid locking connector tabs from damage while installing.Perfect for 1000Base-T, 10/100Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice and token ring type 3 applications.Comes with lifetime limited warranty

Designed to transmit data at 1000 Mbps.Dual gold-plated RJ-45 male connectors for a flawless connection.50' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty.1 x RJ45 male connector A/B.PVC 4-pair stranded UTP.25'.Conductor: Copper.System requirements: For 1000 Base-T (1 Gbps ethernet), 10/100 Base-T (ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice and token ring type 3 applications as well as EIA/TIA application.Feature molded connectors with integral strain relief.High-quality copper wire and a staggered-pin plug design to keep near-end crosstalk levels to a minimum.Snagless design protects the locking tabs on the RJ45 connectors from being damaged or snapped off during installation.Deliver stable performance up to 550MHz/1 Gbps communication

1 each.Up to 100MB per second for high bandwidth.Ideal for high-speed Internet access, home/small-office networking and audio/video distribution

The C2G ® 3' RJ-45 male/male Cat5e white snagless unshielded Ethernet network patch cable with FR-PVC jacket, truncates both impedance and structural return loss. The 24-AWG stranded bare copper cable minimizes near-end crosstalk levels. The 50-micron gold-plated copper alloy contacts ensure optimal signal conductivity. This cable transmits data at the rate of 1000 Mbps. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer network patch cable. Bonded paired cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other high performance networking applications..Cable length: 3'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.White.FR-PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, ANSI/TIA-568-C-2 standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in white color.Data transfer rate: 1000 Mbps.Diameter: 5.3 mm OD jacket, 0.95 + 0.05 mm insulation, thickness: 0.55 mm jacket.Voltage rating: 30 V, Dielectric strength: 500 MV/m.Resistance: 89 ohm/km (maximum) DC conductor, 100 ohm/km (minimum) insulation.Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-Any LAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice.Weight: 0.09 lbs..Comes with lifetime warranty

The 4XEM 250 ft. CAT5E Pure Copper CMR Riser Bulk Cable is designed for high‑performance network installations requiring reliability, safety, and long‑distance signal integrity. Built with 24 AWG solid pure copper conductors, it delivers superior conductivity, minimal attenuation, and consistent data performance—ideal for LANs, VoIP, and high‑speed internet setups. Its CMR‑rated PVC jacket provides fire‑safe protection for in‑wall and vertical riser installations, meeting strict building code requirements. Supporting frequencies up to 350 MHz, this U/UTP cable ensures stable, extended‑range transmission for commercial and residential environments. The 250 ft. pull‑box roll is perfect for custom cabling runs, allowing flexible termination and easy installation. Fully compliant with ANSI/TIA‑568.2‑E, ISO/IEC 11801, and RoHS, this cable is engineered for professional‑grade performance and backed by a lifetime warranty..Designed for riser‑rated networking and safe in‑wall installs..Provides a 250 ft length for flexible cabling projects..Constructed with solid 24 AWG pure copper conductors..Protected by a blue PVC CMR fire‑rated jacket..Supports 350 MHz for extended signal stability..Delivered as a connector‑free bulk roll for custom terminations..Enables 1 Gbps data speeds for everyday network use..Works with patch panels, keystones, and structured LAN setups..Complies with ANSI/TIA‑568.2‑E and ISO/IEC 11801 standards..Lifetime warranty for reliable long‑term use.

For fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data, or video distribution applications. Meets all Cat6 TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL). Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation..This patch cable is perfect for fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data, or video distribution applications.Designed for network adapters, hubs, switches, routers, HDBaseT applications, and more.Constructed with unshielded twisted pair (UTP) wires, designed to counter EMI, RFI, and crosstalk; comes in blue.50 cables per pack.Supports 10 Gigabit Ethernet networks up to 180' for fast data transmission and maximum performance and 1 Gigabit Ethernet networks up to 328'.Snagless connector design for high-density environments and protecting the RJ45 connector's lock.Meets or exceeds the EIA/TIA TSB-40 CAT-6 standards.Cable length is 10'

The C2G ® 50' male to male category 6 snagless blue patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Ethernet network patch cable is suitable for high performance networking applications.Cable length: 50'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Features durable polycarbonate connector and four twisted pair 24 AWG stranded bare copper for good conductivity.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Unshielded twisted pair technology for less signal loss.Comes in blue color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 1.35 lbs..Comes with lifetime warranty

The C2G ® two-foot RJ-45 male/male Cat6 black snagless unshielded Ethernet network patch cable with PVC jacket truncates both impedance and structural return loss. The 24-AWG stranded bare copper cable minimizes near-end crosstalk levels. The 50-micron gold-plated copper alloy contacts ensure optimal signal conductivity. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer network patch cable. Bonded paired cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Category 6 for Network Device.RJ-45 Male.2ft.Black.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color.Diameter: 6.2 mm + 0.3 mm OD jacket, 0.98 + 0.05 mm insulation, thickness: 0.6 mm jacket.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD and 55/155 Mbps ATM.Weight: 0.07 lbs..Comes with lifetime warranty

The C2G 22011 15' Cat5e 350MHz snagless unshielded black network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and FR-PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Dimensions: 15'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color and features polycarbonate connector, FR-PVC jacket, molded PVC hood, HDPE insulation and copper alloy contact.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.55 mm Nominal thickness, 5.3 +/- 0.15 mm O.D., 0.95 +/- 0.02 mm Dia. conductor.DC resistance: 89 Ohm/km maximum, Insulation resistance: 100 Ohm/km minimum, Dielectric strength: 500 MV/m.Frequency: Up to 350 MHz.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.35 lbs..Comes with lifetime warranty.Category 5e for Network Device.C2G® 29932 8' Black power extension cord with NEMA connectivity on both ends allow you to extend power cord for flexibility. The 16 AWG cord provides reliable connection.

The C2G 2' blue Cat6 snagless patch cable has a RJ-45 male connector on each end for reliable connectivity. This cable features a snagless design that protects the connectors from damage and offers long-lasting optimal performance. It also features HDPE insulation and a PVC jacket for durability. The 24-AWG bare stranded copper conductors and 50-micron gold plated copper alloy connectors ensure optimal signal conductivity. This cable is suitable for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, and 4/16 Mbps token ring applications..Category 6 for Network Device.RJ-45 Male.2ft.Blue.RoHS, TIA/EIA-568-B-2.1 and draft 9 compliant.50-micron gold plated connectors ensure clean and clear transmission.Designed for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-AnyLAN and 100 Mbps TP-PMD.Comes in blue color.Diameter: 0.98 + 0.05 mm.Voltage: 30 V.Resistance: 9.38 Ohm/100 m, Impedance: 100 Ohm.Mutual capacitance: 5600 pf/100 m.Temperature: 60 deg C.Propagation delay: 545 ns/100 m, Delay skew: 45 ns/100 m.Weight: 0.069 lbs..Comes with lifetime warranty.StarTech.com® PXT101NB10 10' Black power cord with NEMA 1-15P and IEC 60320 C7 connectivity helps to extend your laptop power cord length. 18 AWG cord provides reliable connection.

The C2G 22011 15' Cat5e 350MHz snagless unshielded blue network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and FR-PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Dimensions: 15'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in blue color and features polycarbonate connector, FR-PVC jacket, molded PVC hood, HDPE insulation and copper alloy contact.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.55 mm Nominal thickness, 5.3 +/- 0.15 mm O.D., 0.95 +/- 0.02 mm Dia. conductor.DC resistance: 89 Ohm/km maximum, Insulation resistance: 100 Ohm/km minimum, Dielectric strength: 500 MV/m.Frequency: Up to 350 MHz.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.34 lbs..Comes with lifetime warranty.Category 5e for Network Device.6" LP4 to LP4 SATA power Y cable adapter features powers an IDE (LP4 connected) drive using a SATA power connector from the computer power supply.

The C2G 31341 5' Cat6 snagless blue network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Dimensions: 5'L.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in blue color & features polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact & HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.17 lbs..Comes with lifetime warranty.Category 6 for Network Device

The C2G ® seven-foot red Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable with PVC jacket truncates both impedance and structural return loss. With its 24 AWG stranded bare copper conductor, it minimizes near-end crosstalk levels. The patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Category 6 for Network Device.RJ-45 Male.7ft.Red.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.22 lbs..Comes with lifetime warranty

The C2G 22014 15' Cat6 snagless blue network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..Category 6 for Network Device.RJ-45 Male.15ft.Blue.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m maximum.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.4 lbs..Comes with lifetime warranty

The C2G ® 3' yellow Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Category 6 for Network Device.RJ-45 Male.3ft.Yellow.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in yellow color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.11 lbs..Comes with lifetime warranty

The C2G 3975 6' black Cat6 snagless network patch cable is suitable for fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data or video distribution applications. This patch cable is compatible with network adapters, hubs, switches, routers, patch panels and other high performance networking applications. This cable offers RJ-45 male to RJ-45 male connection. The snagless design safeguards clips while plugging and unplugging. It has 50-micron gold plated contacts and four pairs of 24 AWG stranded bare copper conductors. It has DC resistance of 9.38 Ohm/100 m and voltage rating of 30 V. This patch cable has molded PVC hood, copper alloy contact and HDPE insulation..Category 6 for Network Device.RJ-45 Male.6ft.Black.Certifications & Standards: TIA/EIA.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m max.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires that ensure decrease in near-end crosstalk and structural return loss.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.18 lbs..Comes with lifetime warranty

The C2G Cables to Go CAT-6 snagless unshielded (UTP) slim network patch cable is the perfect solution for high-density data center applications. The use of 28 AWG conductors allows for a 36% reduction in diameter over a standard CAT-6 network patch cable. This reduced diameter provides a smaller cable surface area which allows for increased airflow when compared to standard CAT-6 cables. The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables. The small size and small bend radius of this cable allow it to be easily routed through cable management panels..CAT-6 snagless unshielded (UTP) slim Ethernet network patch cable designed for fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications.Cable length: 7'.Features an RJ45 (male) connector on each end.Constructed from high-quality copper cable and features a durable PVC jacket; comes in blue.The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables.36% reduction in diameter compared to standard Cat5e cables.28 AWG cable is perfect for crowded spaces inside a rack unit or limited spaces.Meets the ANSI/TIA-568-C.2 standard for patch cord performance.Lifetime limited manufacturer warranty

This C2G 50' black Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable has a PVC jacket, and it truncates both impedance and structural return loss. It features a 24 AWG stranded bare copper conductor and minimizes near-end crosstalk levels. This patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, and patch panels and is useful for high performance networking applications..Cable length: 50'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 1.38 lbs..Comes with lifetime warranty.Contact material: 50 micron gold-plated copper alloyCompatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Kensington Technology Mobile Tablets Blue Kensington Trapper Keeper Universal Case - Designed with a mead-inspired style

The C2G® 10' male to male category 5e blue snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Category 5e.10ft.Blue.Connector on first end: 1 x RJ-45 Male network, connector on second end: 1 x RJ-45 Male network.Device supported: Network device, Snagless design for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.Features unshielded twisted pair technology for good LAN network connectivity.Come in blue color.Jacket material: FR-PVC, Nominal thickness: 0.55 mm, Outer diameter: 5.3 mm + 0.15 mm.Conductor DC resistance: 89 ohm/km (maximum).Insulation resistance: 100 ohm/km (minimum).Dielectric strength: 500 MV/m.Insulation: HDPE, Diameter: 0.95 + 0.02 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.24 lbs..Comes with lifetime warranty

The N201-06N-WH Premium Cat6 Gigabit Snagless Molded UTP Patch Cable (M/M) is recommended for distributing data, voice and video through computers, network adapters, routers, servers, modems, hubs and switches in high-density data centers. Designed for fast transmission and excellent signal quality, this cable ensures peak performance throughout your local area network (LAN). It reduces impedance and structural return loss compared to standard 100 MHz wire. This six-inch white cable is designed for 1000Base-T (1 Gbps Ethernet), 10/100Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice, Token Ring Type 3 and EIA/TIA applications. Manufactured from 24 AWG four-pair stranded UTP with a rugged PVC jacket, the N201-06N-WH delivers speeds up to 550 MHz/1 Gbps and flawless signal delivery, while keeping near-end crosstalk levels to a minimum. The RJ45 short-body connectors' snagless design protects the locking tabs from being damaged or broken off during installation. Corrosion-resistant gold-plated copper contacts provide maximum conductivity and minimize data loss. Integral strain relief gives the cable extra flexibility, reduces stress, and helps the cable and connectors move freely without cracking. Meets most other current industry standards, including IEEE 802.3ab, 802.5, ISO/IEC 11801 and ETL (Cat6 draft 11)..Premium cabling for Cat6 home/office network applications.Rated for 550 MHz/1 Gbps communications.Snagless connectors prevent damaged tabs during installation.24 AWG 4-pair stranded UTP with PVC jacket.Integral strain relief protects connectors from stress and cracking.Certifications & Standards: IEEE 802.3ab, 802.5, ISO/IEC 11801 and ETL (Cat6 draft 11)

The C2G ® 25' black Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable with PVC jacket truncates both impedance and structural return loss. This cable, with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. The patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 25'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.71 lbs..Comes with lifetime warranty.The Tripp Lite N002-030-BL 30' CAT-5e RJ-45 Molded Patch Cable, Blue, is apt for 1000 Mbps networks and facilitates error-free data transfer.

C2G® CAT6 UTP Patch cable in white color connects network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other networking equipments. The 10' cable is made of flexible as well as fire retardant PVC to ensure maximum bending and to prevent any fatal fire accident. HDPE shielding on 24 AWG conductors secure data from electromagnetic and radio frequency interference. Twisted pair design of the cable conductors minimizes crosstalk and attenuation for clear signal transmission. Gold-plated connectors prevent signal loss due to oxidation or corrosion. Snagless design of the RJ45 male-to-male connector prevents wear and tear during installation. Suitable for application involving voice, data and video distribution in Ethernet and gigabit network..Network patch cable that protects clips when plugging and unplugging.Easy-to-install 10' long cord.RJ-45 male to male connectors for reliable connections.Ultra flexible PVC jacket offers double shielding against outside noise.Comes in white color for a new look.Network patch cable offers flexibility.Operates at 30 V and 60 Deg C for better operation.2 x 8P8C (RJ45), 4 twisted pair conductors for good conductivity.The 24 AWG wire gauge allows more of the signal to pass through without distortion or signal loss.50-micron Gold-plated connector plating for good conductivity.Patch style connector is great for HD video applications.Polycarbonate connector and molded PVC hood for heavy duty use.Has 0.60 mm average thickness and 6.20 mm + or - 0.30 mm outer diameter for ease of use.Meets RoHS Certification and standards.9.38 ohm 100m conductor DC resistance for better performance.Weighs 0.29 lb.Comes with lifetime warranty.C2G® 27163 10' White CAT6 UTP Patch cable supports 10/100/1000 Base-T gigabit network application. Snagless molded RJ-45 male to male connectors offer reliable connection.

The C2G ® 4' RJ-45 male/male Cat6 blue snagless unshielded Ethernet network patch cable with PVC jacket, truncates both impedance and structural return loss. The 24-AWG stranded bare copper cable minimizes near-end crosstalk levels. The 50-micron gold-plated copper alloy contacts ensure optimal signal conductivity. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer network patch cable. Bonded paired cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Category 6 for Network Device.RJ-45 Male.4ft.Blue.Tripp Lite 6' Null modem gold cable uses copper conducting material to resist corrosion and allows you to connect 2 serial devices that require cross-wired configuration.

The C2G 10' red Cat5e snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable with FR-PVC jacket truncates both impedance and structural return loss. The cable features 24 AWG stranded bare copper conductor, which minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hubs, switches, routers, network adapters, modem DSL/cables, patch panels and other high-performance networking applications..Category 5e for Network Device.RJ-45 Male.10ft.Red.FR-PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, EIA/TIA 568B.2 standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color.Diameter: 5.3 mm OD jacket, 0.95 + 0.05 mm insulation, thickness: 0.55 mm jacket.Voltage rating: 30 V, Dielectric strength: 500 MV/m.Resistance: 89 ohm/km (maximum) DC conductor, 100 ohm/km (minimum) insulation.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-Any LAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice.Weight: 0.23 lbs..Comes with lifetime warranty

The C2G® 7' male to male category 6 blue snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Ethernet network patch cable is suitable for high performance networking applications.Cable length: 7'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 4 twisted pair 24 AWG stranded bare copper, Construction: Polycarbonate connector.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in blue color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.21 lbs..Comes with lifetime warranty

Cat5e snagless network patch cable for fast Ethernet network, requiring bandwidth-intensive voice, data/video distribution applications..Cat5e snagless network patch cable for fast Ethernet network, requiring bandwidth-intensive voice, data/video distribution applications.Cable length: 7'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.FR-PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, ANSI/TIA-568-C-2 standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in gray color.Data transfer rate: 1000 Mbps.Diameter: 5.3 mm OD jacket, 0.95 + 0.05 mm insulation, thickness: 0.55 mm jacket.Voltage rating: 30 V, Dielectric strength: 500 MV/m.Resistance: 89 ohm/km (maximum) DC conductor, 100 ohm/km (minimum) insulation.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-Any LAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice.Weight: 0.17 lbs..Comes with lifetime warranty

The C2G ® 1' orange Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cable length: 1'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in orange color.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.05 lbs..Comes with lifetime warranty.Comes with lifetime warranty

The C2G 27153 10' Cat6 snagless unshielded black network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..RJ-45 Male.10ft.Black.Features black polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact and HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m max.Frequency: Up to 500 MHz.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.25 lbs..Comes with lifetime warranty.6 outlets surge protector features 15 A, 120 V, 1800 W, 2 position on/off switch/15 A AC circuit breaker.

The C2G ® 5' gray Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cable length: 5'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Comes in gray color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.16 lbs..Comes with lifetime warranty.Contact material: 50 micron gold-plated copper alloyCompatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Weight: 0.16 lbs..Comes with lifetime warranty

The C2G Cables to Go CAT-6 snagless unshielded (UTP) slim network patch cable is the perfect solution for high-density data center applications. The use of 28 AWG conductors allows for a 36% reduction in diameter over a standard CAT-6 network patch cable. This reduced diameter provides a smaller cable surface area which allows for increased airflow when compared to standard CAT-6 cables. The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables. The small size and small bend radius of this cable allow it to be easily routed through cable management panels..CAT-6 snagless unshielded (UTP) slim Ethernet network patch cable designed for fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications.Cable length: 10'.Features an RJ45 (male) connector on each end.Constructed from high-quality copper cable and features a durable PVC jacket; comes in blue.The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables.36% reduction in diameter compared to standard Cat5e cables.28 AWG cable is perfect for crowded spaces inside a rack unit or limited spaces.Meets the ANSI/TIA-568-C.2 standard for patch cord performance.Lifetime limited manufacturer warranty

The C2G ® 14' black Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Cat6 snagless unshielded network patch cable for fast Ethernet networks, requiring bandwidth-intensive voice, data or video distribution applications.Cable length: 14'.Connections: one 8-pin RJ-45 male connector on both ends.Connectivity: Wired.PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, TIA/EIA standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in black color.Data transfer rate: 1000 Mbps.Diameter: 6.2 mm + 0.3 mm OD, 0.98 + 0.05 mm conductor, 0.6 mm minimum average thickness.Voltage rating: 30 V.Resistance: 9.38 ohm/100 m (maximum) DC conductor, 100 ohm insulation.Capacitance: 5600 pF/100 m, Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for Gigabit 1000base-T, 100base-T, 10base-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5), 100 VG-Any LAN, 100 Mbps TP-PMD, voice and T1.Weight: 0.4 lbs..Comes with lifetime warranty